Interstate 410
Interstate 410 (I-410), commonly known as the Connally Loop, is a 49-mile (79 km) beltway that encircles San Antonio, Texas, functioning as an auxiliary Interstate route to I-10.[1] It connects major radial highways including I-35 to the northeast, I-10 to the north, I-37 to the southeast, US 90 to the south, US 281 to the northwest, and SH 151 to the west, facilitating circumferential travel around the urban core and access to key destinations such as San Antonio International Airport and Joint Base San Antonio-Fort Sam Houston.[2] The route is maintained by the Texas Department of Transportation (TxDOT) and forms a critical part of the National Highway System, handling high traffic volumes particularly in its northern and eastern sections, where it expands to up to ten lanes.[1] The beltway begins and ends at interchanges with I-35 in the northeastern and southwestern quadrants of San Antonio, respectively, and is numbered clockwise from its zero-milepost at the southwestern I-35 junction.[1] From there, it proceeds northwest along a semi-rural corridor overlapping with SH 16 for about 15 miles before reaching the busy I-10 interchange near the city's northwest side.[2] Continuing eastward, I-410 passes through densely developed commercial and residential areas, intersecting US 281 at a major systems interchange and serving as a primary artery for airport traffic before overlapping with I-35 for approximately 3.6 miles in the northeast.[1] The southeastern arc connects to I-37 and US 90, traversing more suburban terrain south of downtown, with the entire loop closing back at I-35 southwest of the city center.[2] Construction of I-410 originated in the 1950s as a replacement for portions of the older Loop 13, with the first segment opening to traffic in 1958 near the intersection of what would become I-10 and US 281.[1] The route received its Interstate designation in 1959, with approval from the American Association of State Highway Officials (AASHO) on November 10, 1958, and full completion achieved in 1966.[1] It was named the John B. Connally Loop in honor of former Texas Governor John Connally, who served from 1963 to 1969 and played a role in state infrastructure development during his tenure.[2] Ongoing improvements reflect I-410's role as one of Texas's busiest freeways outside Houston, with TxDOT investing in widening projects to address congestion.[2] Notable recent efforts include a $134 million reconstruction of the I-10/I-410 interchange completed in 2007, a $155 million upgrade to the I-410/US 281 systems interchange finished in 2008, and expansions adding lanes along the northern arc from 2000 onward, bringing much of it to eight or ten lanes.[1] As of 2025, TxDOT has planned enhancements, including operational improvements at the I-410/US 281 interchange and widening on the southwest section from SH 16 to Ingram Road, aimed at improving safety and capacity amid growing regional traffic demands.[3]Overview
Route summary
Interstate 410 (I-410) is a 49.49-mile (79.64 km) loop route that serves as a full beltway around San Antonio, Texas, providing a circumferential path for regional traffic while connecting major radial highways including I-10, I-35, I-37, US 90, US 281, and SH 151.[4] As an auxiliary Interstate of I-10, it facilitates efficient travel around the urban core, allowing drivers to bypass downtown San Antonio and access key suburban areas, business districts, and San Antonio International Airport on the city's north side.[2] The route's exit numbering follows a clockwise progression, beginning at mile 0 at the southern interchange with I-35 and increasing sequentially around the loop to approximately mile 49 back at the same I-35 junction, where a short concurrency with I-35 occurs for continuity.[5] This system aligns with standard Interstate loop conventions, aiding navigation for the predominantly six-lane freeway that varies from urban multilane sections to more open alignments.[4] Traffic volumes on I-410 reflect San Antonio's growth patterns, with the northern arc experiencing high congestion—often exceeding 300,000 vehicles per day near urban hubs like the I-10 and US 281 interchanges—due to dense commercial and residential development (as of 2022).[2] In contrast, the southern arc sees lower volumes, around 100,000 vehicles daily, as it traverses more rural and semi-rural terrain south of the city (as of 2022).[2] Overall, I-410 plays a critical role in the region's transportation network by distributing traffic flows, supporting commuter routes, and linking to outer beltways like Loop 1604 for broader metropolitan connectivity.[6]Naming and maintenance
Interstate 410 (I-410) is officially designated by the Texas Department of Transportation (TxDOT) as an auxiliary Interstate Highway loop of Interstate 10 (I-10), utilizing a three-digit numbering system where the first digit is even and the final two digits correspond to the parent route. This designation reflects its role in encircling San Antonio while integrating with the primary east-west corridor of I-10.[7][8] The route carries the honorary name Connally Loop, bestowed in recognition of John Connally, who served as Texas governor from 1963 to 1969 and was instrumental in advancing the state's infrastructure during his tenure. The Texas Transportation Commission approved this designation, formalizing its use alongside the official I-410 markers. Locally, residents and officials commonly reference it as Loop 410 or IH-410, aligning with TxDOT conventions for interstate loops and the broader use of "IH" to denote Interstate Highways in Texas documentation and signage.[2][9] Maintenance of I-410 falls entirely under the jurisdiction of TxDOT's San Antonio District, which oversees planning, construction, operations, and preservation across Bexar County and surrounding areas. The highway contains no toll segments, operating as a fully publicly funded freeway consistent with standard Interstate System routes in Texas.[10][6][11] Signage for I-410 adheres to federal and state standards, featuring distinctive Interstate shield markers at key interchanges and along the route. Exit numbering is mile-based, starting from the southern junction with I-35 and increasing clockwise around the loop to provide consistent orientation for drivers. Guide signs emphasize route confirmation, destinations, and distances, with no routine bilingual English/Spanish implementations per TxDOT policy, though urban signage in San Antonio prioritizes clarity for high-traffic volumes.[12][5]Route description
Southern section
The southern section of Interstate 410 begins at its western terminus, a partial cloverleaf interchange with Interstate 35 southwest of downtown San Antonio in Bexar County, Texas, marking the start of the 49.49-mile Connally Loop. From this junction, the freeway heads northwest through semi-rural landscapes on the city's western outskirts, characterized by flat terrain dominated by agricultural fields and scattered residential developments, overlapping with SH 16 for about 15 miles. This segment maintains a consistent four-lane configuration (two lanes in each direction) throughout its length, supporting relatively low traffic volumes compared to the more urbanized northern arc, with annual average daily traffic (AADT) typically ranging from 20,000 to 40,000 vehicles in rural stretches.[2][1] As I-410 progresses northwest then curves northeastward toward the northwest side, it serves as a vital connector for freight transport and suburban commuters navigating the periphery of San Antonio, bypassing heavier congestion in the city center. The route reaches the I-10 interchange near the northwest side before turning eastward into more developed areas, but the southern arc proper includes the southeastern connection to I-37 at a full cloverleaf interchange southeast of the city (exit 41), offering southeastbound access toward Corpus Christi and the Gulf Coast while accommodating growing freight demands from nearby industrial zones. Further west along the closing southern segment, a key interchange occurs at exit 6 with U.S. Highway 90 (Cleto Rodriguez Freeway), providing access to Joint Base San Antonio-Lackland Air Force Base and facilitating military-related traffic along with regional commerce. The route traverses transitional areas with emerging industrial pockets near US 90, particularly as flat farmlands give way to light manufacturing and logistics facilities south of downtown. Speed limits remain at 70 mph for most of this rural freeway, emphasizing its role in efficient long-haul movement.[5][4] Nearing its conclusion in the clockwise direction, the southern arc from I-37 to US 90 and back to I-35 spans approximately 25 miles, encompassing higher exit numbers (e.g., 41 at I-37 to low numbers near 6 at US 90), traversing predominantly undeveloped terrain with minimal urban intrusion, underscoring its function as a quieter bypass for south-side travel.[8][1]Northern section
The northern section of Interstate 410 continues clockwise from the northwestern I-10 interchange, curving eastward through densely developed suburbs toward the periphery of the city center and beyond to the northeast. This segment traverses heavily urbanized terrain, including business districts, mid-century residential neighborhoods, and commercial hubs, while providing essential connectivity for commuter and airport traffic. Elevated structures are incorporated throughout to facilitate navigation over urban obstacles such as railroads and local roadways.[8][13] In its busiest areas, the highway expands to eight or ten lanes total (four or five lanes in each direction) to handle substantial traffic volumes, with annual average daily traffic (AADT) exceeding 296,000 vehicles near key interchanges as of 2018. Congestion is particularly acute near commercial zones, where backups frequently extend during peak hours, contributing to I-410's ranking among Texas's most congested roadways. The roadway supports high mobility demands in this urban corridor, contrasting with the more rural southern portion of the loop.[14][15] Major connections along this arc include the stack interchange with U.S. Highway 281—known as the San Antonio Web—providing routes to San Antonio International Airport and northern business areas (exit 21), followed by the northeastern overlap with I-35 for approximately 3.6 miles before separating near Rittiman Road. The section then curves southeastward along the eastern side to the I-37 interchange (exit 41), after approximately 24 miles, encompassing a span of urban and suburban navigation critical to the region's transportation network and leading into the southeastern arc.[15][16]History
Early development
The origins of what would become Interstate 410 trace back to the pre-1950s era, when it served as an early bypass route designated as Loop 13 under the Texas state highway system. Proposed as early as 1932 by engineer Edwin Arneson as part of a local loop around San Antonio, the initial segments were established in the late 1930s on the south side, primarily along Military Drive to connect key military installations such as Kelly Field and Brooks Field. By around 1950, the north side portion was designated as a two-lane road extending from San Pedro Avenue eastward to US 81 (now Austin Highway), utilizing existing roads like Harry Wurzbach Military Highway to alleviate growing traffic pressures in the city's expanding suburbs.[17][1] In 1960, significant portions of Loop 13 were redesignated as Loop 410 to align with the evolving state highway numbering and prepare for federal interstate integration, particularly the section from I-10 to I-35 for continuity. This redesignation occurred amid broader planning in the mid-1950s, when the route was incorporated as an auxiliary to the Interstate Highway System following the system's authorization in 1956; it received formal approval from the American Association of State Highway Officials on November 10, 1958, as part of Texas's urban interstate network. The planning emphasized a beltway to encircle San Antonio, addressing the need for efficient circulation around the urban core and military-related growth.[1][2] Initial construction began in 1955, prioritizing the southern segments due to lower development and fewer obstacles in those areas, which allowed for quicker acquisition of right-of-way and reduced costs compared to the more built-up northern and eastern corridors. Work focused on the southwestern arc from US 90 westward, with the first segment between Culebra Road and Bandera Road opening in 1956 as a freeway, followed by the completion of the northwestern portion to NW Military Highway by 1958. A key early milestone came in 1960, when a partial opening connected I-35 to US 90, providing the first continuous freeway link in the southern section and marking substantial progress toward the full loop.[17][18][4]Completion and designation
The final phases of Interstate 410's construction in the 1960s focused on closing the loop and upgrading segments to meet Interstate standards. The northern arc, spanning from Interstate 10 to Interstate 35 through urbanized areas, was completed between 1966 and 1967, incorporating complex interchanges such as those at U.S. Highway 281 and Fredericksburg Road to facilitate traffic flow in growing northern suburbs.[2] By 1967, the entire 49-mile loop had been closed, with all sections achieving basic four-lane divided highway standards, marking the completion of San Antonio's inner beltway as the first fully realized Interstate loop in Texas.[1] Funding for the project came primarily from federal Interstate Highway System allocations, which covered 90 percent of construction costs under the Federal-Aid Highway Act, supplemented by 10 percent state contributions from Texas. Initial cost estimates in the early 1960s projected expenses in the tens of millions, though exact figures varied with phased builds; the emphasis on federal support accelerated progress amid San Antonio's postwar expansion.[19] Construction faced early challenges, including land acquisition in rapidly developing suburbs where residential and commercial growth outpaced planning, requiring bond elections and negotiations for right-of-way. Coordination with local roads also proved difficult, as integrating the loop necessitated adjustments to existing arterials like Loop 13 remnants and urban connectors to avoid disruptions in densely populated areas.[20] On July 31, 1969, the Federal Highway Administration officially designated the route as Interstate 410 via Texas Transportation Commission Minute Order 062561, formalizing its inclusion in the national Interstate System after the Bureau of Public Roads' approval in 1959 and subsequent upgrades. This designation affirmed the highway's role as a critical bypass around San Antonio, connecting to primary Interstates 10 and 35.[8]Expansions and improvements
Following its designation in 1969, Interstate 410 underwent significant expansions and improvements to address surging traffic volumes driven by San Antonio's population boom and economic development. During the 1970s and 1980s, the northern sections were widened to six lanes to better handle urban growth and commuter demands in the expanding metropolitan area. In the 1990s, key upgrades included the addition of frontage roads and additional ramps at the interchanges with I-10, enhancing access and reducing congestion at these critical junctions. The 2000s saw the completion of the "San Antonio Web" project, a major initiative to build a fully directional stack interchange with US 281. This complex structure, featuring high-speed direct connectors for seamless flow, opened on June 9, 2008, at a cost of $154.7 million after three years of construction.[21] In the 2010s, reconstruction efforts focused on pavement rehabilitation across busy corridors to extend the roadway's lifespan and improve safety. A decade-long widening program culminated in the early 2010s, expanding the northern arc to ten lanes over much of its length from Culebra Road to Austin Highway.[1] In the late 2010s and early 2020s, additional improvements included phased reconstructions of the I-10/I-410 interchanges, with expansions to eight lanes through the northwest interchange completed by 2009 and further direct connector ramps added in subsequent phases to enhance capacity and safety.[2]Interchanges
Major interchanges
Interstate 410 features several major interchanges that serve as critical junctions for regional traffic flow in San Antonio, Texas, accommodating high volumes of vehicles and incorporating advanced engineering to handle congestion and connectivity demands. These interchanges are designed to integrate seamlessly with the beltway's role in bypassing the urban core, with the northern arc utilizing elevated structures to reduce surface-level disruptions in densely populated areas.[2] The southern terminus of I-410 at its junction with I-35 (mile marker 0) is a full cloverleaf interchange providing direct ramps for all movements, marking the starting point of the loop and facilitating access from southbound I-35 traffic heading into the city. This design supports efficient merging for vehicles entering the beltway from I-35, with average annual daily traffic (AADT) volumes of 127,190 vehicles (as of 2022) in the vicinity. The I-35 Northeast Expansion (NEX) project includes improvements north of I-410, with Phase I (from I-410 north to FM 3009) completed in 2024 adding direct connectors; Phase II, which would address the I-410 interchange with new flyover ramps while preserving the cloverleaf, remains unfunded as of 2025.[22][23][24] On the western side, the interchange with I-10 at exit 16 is a high-volume diamond configuration that provides essential access to downtown San Antonio, handling 112,733 vehicles daily (as of 2022) and serving as a key link for westbound travelers avoiding the city center. The diamond layout utilizes frontage roads for ramp access, minimizing weaving and supporting commercial and commuter traffic in the growing Port San Antonio area.[23][25] The complex at US 281 (exit 21), known as the San Antonio Web, is a multi-level stack interchange completed between 2003 and 2008 at a cost of $154.7 million, designed to eliminate weaving movements and improve flow for northbound traffic toward the city's medical district and airport. This fully directional structure features elevated ramps that separate high-speed through traffic on I-410 from US 281 connectors, carrying approximately 64,456 vehicles per day (as of 2022) and significantly reducing congestion in one of San Antonio's busiest corridors.[21][23] Further east, the I-10 interchange at exit 33 is a partial cloverleaf near San Antonio International Airport, managing over 80,928 daily vehicles (as of 2022) through its looped ramps and handling substantial east-west and circumferential flows. This junction supports airport-bound traffic and regional commerce, with current AADT reaching 80,928 north of the interchange (as of 2022); it is undergoing a $156 million upgrade to a five-level stack, 80% complete as of February 2025, to accommodate projected growth, including flyover ramps opened in 2023 and 2025.[26][23][27][28] At the southeastern end, the I-37 interchange (exit 41) functions primarily as a merge point with partial ramps, enabling seamless connections for south Texas travel along the Gulf Coast corridor and distributing lower-volume traffic of about 55,100 vehicles daily (as of 2022). This configuration prioritizes through-movement efficiency for freight and commuter routes heading toward Corpus Christi.[23]Exit list
Interstate 410 features 53 exits numbered clockwise from 1 to 53, beginning just after its southern interchange with I-35 and resetting there upon completion of the loop. This numbering system was adjusted following expansions in the 2000s, including the addition of new interchanges and renumbering to accommodate growth. The following table enumerates all exits, with destinations and any configuration notes such as splits or partial access.[5]| Exit | Milepost | Destinations | Notes |
|---|---|---|---|
| 1 | — | Frontage Road, Traders Village | — |
| 2 | — | FM 2536, Old Pearsall Road, Traders Village | — |
| 3A | — | Ray Ellison Drive | Split from Exit 3 |
| 3B | — | Medina Base Road | Split from Exit 3 |
| 4 | — | Valley Hi Drive, Joint Base San Antonio-Lackland AFB | — |
| 6 | — | US 90 (Cleto Rodriguez Freeway) – San Antonio, Del Rio; Joint Base San Antonio-Lackland AFB | — |
| 7 | — | Marbach Road | — |
| 9A | — | SH 151, SeaWorld, Stotzer Freeway | Split from Exit 9 |
| 9B | — | East SH 151, Military Drive | Split from Exit 9 |
| 10 | — | To FM 1957, Culebra Road; St. Mary's University, Little Flower Basilica | — |
| 11 | — | Ingram Road | — |
| 12 | — | Exchange Parkway | — |
| 13A | — | Spur 421, Bandera Road, Leon Valley | Split from Exit 13 |
| 13B | — | North SH 16, Leon Valley, Bandera | Split from Exit 13 |
| 14A | — | Summit Parkway, Evers Road | Split from Exit 14 |
| 14B | — | Callaghan Road; Texas DOT District Office | Split from Exit 14 |
| 14C | — | Babcock Road; Hospitals, South Texas Medical Center, UT Health Science Center | Split from Exit 14 |
| 15 | — | Loop 345, Fredericksburg Road, Balcones Heights; Hospitals, Carpool, Park & Ride | — |
| 16 | — | I-10, US 87 – San Antonio, El Paso | — |
| 17A | — | Cherry Ridge Drive | Split from Exit 17 |
| 17B | — | Vance Jackson Road | Split from Exit 17 |
| 18 | — | Jackson-Keller Road, West Avenue, Honeysuckle Lane | — |
| 19A | — | Honeysuckle Lane, Frontage Road | Split from Exit 19 |
| 19B | — | North FM 1535, Military Highway, Castle Hills | Split from Exit 19 |
| 20A | — | FM 2696, San Pedro Avenue, Blanco Road | Split from Exit 20 |
| 20B | — | McCullough Avenue | Split from Exit 20 |
| 21A | — | US 281, To I-37 – San Antonio, Johnson City; McAllister Freeway | Split from Exit 21 |
| 21B | — | Airport Boulevard; San Antonio International Airport | Split from Exit 21 |
| 22 | — | Wetmore Road, Broadway | — |
| 23 | — | Nacogdoches Road | — |
| 24 | — | Harry Wurzbach Road; Joint Base San Antonio-Fort Sam Houston, MacArthur Park | — |
| 25A | — | Starcrest Drive; Hospitals | Split from Exit 25 |
| 25B | — | FM 2252, Perrin-Beitel Road | Split from Exit 25 |
| 26A | — | South Loop 368 – Alamo Heights | Split from Exit 26 |
| 26B | — | Interchange Parkway, Perrin Creek Drive | Split from Exit 26 |
| 27 | — | South I-35, I-410 – San Antonio | — |
| 27B | — | Randolph Boulevard, Windcrest, I-410; Park & Ride | — |
| 30 | — | Binz-Engleman Road, Rittiman Road, Space Center Drive | — |
| 31 | — | South I-35 – San Antonio; Binz-Engleman Road | Left exit |
| 31A | — | FM 78 – Kirby | Split from Exit 31 |
| 31B | — | Loop 13, WW White Road | Split from Exit 31 |
| 32 | — | Dietrich Road, FM 78 – Kirby | — |
| 33A | — | West I-10, US 90 – San Antonio | Split from Exit 33 |
| 33B | — | East I-10, US 90, SH 130 – Houston, Austin, Waco | Split from Exit 33 |
| 34 | — | FM 1346, East Houston Street | — |
| 35 | — | US 87, Rigsby Avenue – Victoria | — |
| 37 | — | Southcross Boulevard, Sulphur Springs Road, Sinclair Road | — |
| 39 | — | Spur 117, WW White Road | — |
| 41 | — | North I-37, US 281 – San Antonio, Corpus Christi; Hospitals | — |
| 42 | — | Spur 122, South Presa Street, Southton Road; Texas DOT Bexar Metro Office | — |
| 43 | — | Espada Road; San Antonio Missions National Historical Park | — |
| 44 | — | South US 281, Spur 536 (Roosevelt Avenue) – Pleasanton; Stinson | — |
| 46 | — | Moursund Boulevard | — |
| 47 | — | University Way; Texas A&M University – San Antonio | — |
| 48 | — | Zarzamora Street; Texas A&M University – San Antonio | — |
| 49 | — | South SH 16, Spur 422 (Palo Alto Road) – Poteet; Hospitals, Palo Alto College | — |
| 51 | — | FM 2790 – Somerset, Somerset Road | — |
| 53 | — | I-35 – San Antonio, Laredo | — |