Equipment codes
Equipment codes, formally known as ICAO aircraft equipment codes, are standardized alphanumeric identifiers used in international flight plans to denote the communication (COM), navigation (NAV), approach aids, and surveillance equipment installed and operational on an aircraft. These codes enable air traffic services (ATS) to assess an aircraft's capabilities for route clearance, procedural assignments, and safety enhancements, ensuring efficient and compatible airspace management. Developed under the International Civil Aviation Organization (ICAO) standards, they replaced earlier FAA-specific suffix codes for international operations, becoming mandatory for ICAO flight plans filed with the U.S. Federal Aviation Administration (FAA) since August 27, 2019.[1][2][3] The structure of equipment codes consists of a primary field in item 10 of the ICAO flight plan form, using single-letter suffixes (e.g., /S for standard VHF radio, VOR, and ILS equipment) to indicate basic CNS capabilities, supplemented by subfields for advanced features such as performance-based navigation (PBN), reduced vertical separation minima (RVSM), or data link communications (e.g., /J4 for CPDLC via VHF data link Mode 2). Navigation codes like /G specify Global Navigation Satellite System (GNSS) support, including GPS or GLONASS, while surveillance codes (e.g., /E for ADS-B and Mode S transponder) detail tracking technologies essential for modern airspace. Pilots must accurately select codes based on installed, serviceable equipment and personal qualifications, as inaccuracies can limit route options or approach authorizations.[1][2] Beyond core CNS functions, equipment codes integrate with related ICAO elements like PBN specifications (e.g., RNAV5 or RNP1) to reflect an aircraft's precision navigation performance, supporting global initiatives for seamless air traffic management under the ICAO Global Air Navigation Plan. Their adoption has improved interoperability in mixed-equipage environments, particularly in oceanic and remote regions, though challenges persist in code complexity and training for general aviation pilots.[1][2]Overview
Purpose in Aviation
Equipment codes function as alphanumeric indicators appended to flight plans to specify an aircraft's onboard communication, navigation, surveillance, and performance capabilities. In ICAO-standard flight plans, these are detailed in Item 10, which encompasses the presence of serviceable equipment and additional abilities such as performance-based navigation (PBN), offset procedures, and datalink systems.[4] For FAA domestic flight plans, they appear as suffixes following the aircraft type designator, similarly denoting certified equipment relevant to operational approvals.[5] These codes are essential for air traffic control (ATC) to tailor clearances, routes, altitudes, and procedures to an aircraft's technological profile, thereby optimizing airspace use while maintaining safety margins. By revealing capabilities like area navigation (RNAV) systems or automatic dependent surveillance-broadcast (ADS-B), ATC can authorize advanced procedural routings that reduce congestion and fuel consumption for equipped aircraft, while restricting access for those without.[1] This information supports efficient separation standards, such as reduced vertical spacing in reduced vertical separation minimum (RVSM) airspace for compliant operators.[5] The codes mitigate operational risks by preventing the assignment of procedures incompatible with an aircraft's equipment, for example, directing GNSS-equipped aircraft to satellite-based approaches while diverting others to traditional ground-based aids. This ensures precise navigation and surveillance integration, avoiding procedural errors in high-density airspace.[4] Their regulatory foundation lies in ICAO Annex 11, which outlines air traffic services requirements including flight plan data for capability assessment, and FAA Aeronautical Information Manual (AIM) sections on flight plan filing that emphasize accurate equipment declaration for ATC processing.[6]Historical Development
The development of equipment codes originated in the 1950s and 1960s amid the rapid expansion of international jet air traffic, prompting the International Civil Aviation Organization (ICAO) to standardize flight planning formats that indicated aircraft capabilities with emerging navigation aids. As long-haul jet aircraft like the Douglas DC-8 and Boeing 707 entered service, ICAO focused on harmonizing communication, navigation, and surveillance requirements to ensure safe global operations. In 1959, ICAO adopted the VHF Omnidirectional Range (VOR) as the primary enroute navigation standard, while the Instrument Landing System (ILS) had been internationally standardized earlier in 1949 to support precision approaches. These efforts laid the groundwork for equipment codes in ICAO flight plans, enabling operators to declare compatibility with ground-based aids like VOR and ILS to facilitate air traffic management across borders.[7][8] Key milestones in the 1970s included the formalization of transponder codes for Secondary Surveillance Radar (SSR), which enhanced aircraft identification and altitude reporting. SSR, evolved from post-World War II military Identification Friend or Foe (IFF) systems, saw ICAO initiate standardization efforts for civilian applications, including Mode S interrogations, to address increasing airspace congestion. By the 1990s, codes were expanded to incorporate Global Navigation Satellite System (GNSS) and Area Navigation (RNAV) capabilities, reflecting the operational availability of GPS after 1995 and European directives mandating RNAV equipment by 1998. GNSS standards were integrated into ICAO Annex 10 in 2001, allowing flight plans to specify satellite-based navigation for more flexible routing.[9][10] The 2000s marked the integration of advanced surveillance and data link technologies, with equipment codes updated to include Automatic Dependent Surveillance-Broadcast (ADS-B) and Controller-Pilot Data Link Communications (CPDLC). ADS-B, which broadcasts aircraft position via satellite navigation, was prioritized in ICAO's Future Air Navigation System (FANS) framework, while CPDLC enabled digital messaging to reduce voice congestion in remote areas like oceanic routes. In 2012, ICAO amended its flight plan format (effective November 15) to introduce dedicated Performance-Based Navigation (PBN) codes in Item 10, standardizing declarations for RNAV and Required Navigation Performance (RNP) specifications as outlined in Doc 9613. Post-2012 evolutions in the 2020s have emphasized satellite communications (SATCOM) for voice and data, alongside mandates for advanced ADS-B formats such as 1090 MHz Extended Squitter internationally and Universal Access Transceiver (UAT) in the United States in controlled airspace, driven by safety enhancements in ICAO Annex 10.[11][12][13] Parallel to ICAO's international framework, the Federal Aviation Administration (FAA) adapted equipment indicators for domestic use, shifting in the 1980s from lengthy descriptive phrases to concise single-letter suffixes in flight plans to streamline processing amid rising U.S. traffic. This efficiency measure aligned with broader automation efforts. RVSM suffixes, such as /W for reduced vertical separation above Flight Level 290, were introduced in 2004 as part of domestic implementation, becoming effective in 2005 to support fuel-efficient high-altitude operations. In 2025, ICAO incorporated space-based ADS-B for global tracking under the Global Aeronautical Distress and Safety System (GADSS) into Doc 4444, with Autonomous Distress Tracking (ADT) implementation enabling direct data feed to rescue services as of November 2025.[14] while FAA Aeronautical Information Manual (AIM) updates integrate NextGen capabilities, including enhanced PBN and ADS-B Out requirements for surveillance in controlled airspace and specific Class E areas.[15][16][17]ICAO Equipment Codes
Communication Equipment Codes
Communication equipment codes form a critical part of Item 10a in the ICAO flight plan format, specifying the aircraft's radio telephony (RTF) and related data link capabilities for air traffic services (ATS) to evaluate route compatibility and communication reliability. These codes, defined in ICAO Doc 4444, Appendix 2, use single letters or combinations to denote serviceable equipment, with multiple codes permitted if applicable (e.g., HV for both VHF and HF RTF). They prioritize voice communications via various frequency bands and satellite systems, ensuring pilots can maintain contact with controllers in diverse operational environments, from continental to oceanic routes.[18] The foundational code V signifies VHF RTF, the Very High Frequency radio telephone standard for civil aviation in continental and en-route operations, operating in the 118–137 MHz band for line-of-sight communications up to approximately 200 nautical miles.[18] For long-range voice needs in oceanic or remote regions where VHF propagation is limited, H indicates HF RTF, utilizing High Frequency bands (3–30 MHz) for skywave propagation over thousands of miles, often required for transoceanic flights.[18] Military operations commonly employ U, denoting UHF RTF in the 225–400 MHz band, which offers better performance in certain tactical scenarios but is less prevalent in civil use.[18] To address spectrum congestion in high-density airspaces like Europe, Y specifies VHF RTF equipped for 8.33 kHz channel spacing, doubling the number of available channels from the traditional 25 kHz spacing and mandated in many European States since 1999 to enhance capacity without expanding frequency allocations.[18] Satellite-based systems extend coverage globally; M1, M2, and M3 denote ATC RTF SATCOM via INMARSAT, MTSAT, and Iridium networks, respectively, providing voice communications over satellite in polar, oceanic, or remote areas lacking VHF/HF infrastructure.[19] If no communication equipment is carried or all are unserviceable, N is used, signaling limitations that may restrict route options.[18] Conversely, S serves as the default code for unspecified standard equipment, implying VHF RTF (and typically VOR/ILS for navigation) unless further details are provided.[18]| Code | Description | Primary Application |
|---|---|---|
| V | VHF RTF | Continental civil operations |
| H | HF RTF | Oceanic/remote long-range voice |
| U | UHF RTF | Military tactical communications |
| Y | VHF RTF with 8.33 kHz spacing | Congested European airspace |
| M1 | ATC RTF SATCOM (INMARSAT) | Global satellite voice |
| M2 | ATC RTF SATCOM (MTSAT) | Regional satellite voice (Asia-Pacific) |
| M3 | ATC RTF SATCOM (Iridium) | Polar/global satellite voice |
| N | No COM/NAV equipment or unserviceable | Equipment limitations |
| S | Standard unspecified (VHF RTF default) | Basic civil equipment assumed |
Navigation Equipment Codes
Navigation equipment codes in ICAO flight plans are specified in Item 10a under the NAV/ field, indicating the serviceable navigation and approach aid equipment aboard the aircraft to support enroute navigation and precision approaches. These codes, defined in ICAO Doc 4444 (Procedures for Air Navigation Services - Air Traffic Management), enable air traffic services to assess an aircraft's capabilities for routing and separation.[18] The codes focus on radio-based, satellite-based, and inertial systems, with multiple codes combined as needed to reflect the aircraft's full suite of equipment. The code O denotes VHF Omnidirectional Range (VOR) equipment, a ground-based radio navigation system operating in the VHF band (108-117.95 MHz) that provides aircraft with bearing information relative to a VOR station for enroute navigation.[1] VOR receivers on board compute the magnetic bearing from the station, enabling precise course tracking over long distances when paired with airways.[20] D indicates Distance Measuring Equipment (DME), a transponder-based system that measures slant-range distance to a ground station by calculating the time delay of UHF signals (960-1215 MHz), typically co-located with VOR or ILS facilities.[1] DME supports enroute positioning and approach phases, providing distances up to 200 nautical miles with accuracies of about 0.1 nautical miles or 0.1% of the distance.[20] T represents Tactical Air Navigation (TACAN), a UHF-based military navigation system (962-1213 MHz) that supplies both bearing and distance information similar to VOR/DME but with higher precision for tactical operations.[1] TACAN is interoperable with civil DME (providing range-only to non-military users) and is standard on military aircraft for enroute and terminal navigation.[20] F signifies Automatic Direction Finder (ADF) equipment, which receives non-directional beacon (NDB) signals in the LF/MF bands (190-1750 kHz) to determine the relative bearing to the ground station for navigation.[1] ADF/NDB systems are used for enroute navigation in areas without VOR coverage and for non-precision approaches, though susceptible to atmospheric interference.[20] L denotes Instrument Landing System (ILS) capability, a precision approach system using VHF localizer (108-112 MHz) for lateral guidance and UHF glide slope (329.15-335 MHz) for vertical guidance to align aircraft with the runway.[1] ILS Category I, II, or III supports landings in low visibility, with typical decision heights from 200 feet to autoland.[20] G indicates Global Navigation Satellite System (GNSS) equipment, encompassing satellite constellations like GPS, GLONASS, Galileo, and BeiDou for position, velocity, and time determination via trilateration of signals from multiple satellites.[1] GNSS enables area navigation (RNAV) for IFR operations worldwide, with accuracies of 5-10 meters in position when augmented.[20] I refers to Inertial Navigation System (INS) or Inertial Reference System (IRS), self-contained dead-reckoning equipment using gyroscopes and accelerometers to compute position, orientation, and velocity from initial coordinates without external inputs.[1] INS/IRS maintains accuracy over oceanic or remote routes but drifts at rates of 1-2 nautical miles per hour without periodic updates.[20] C specifies LORAN-C, a low-frequency (100 kHz) hyperbolic radio navigation system using timed pulses from ground stations to compute position via time-difference-of-arrival measurements.[1] As a legacy terrestrial system, LORAN-C provided enroute accuracy of about 0.25 nautical miles but is being phased out globally in favor of GNSS.[20] K denotes Microwave Landing System (MLS), an all-weather precision approach aid operating in the microwave bands (shunt-frequency 5031-5091 MHz for azimuth, 5250-5350 MHz for elevation) to guide aircraft in challenging terrain where ILS is impractical.[1] MLS supports curved approaches and wider coverage but sees limited use due to the dominance of ILS and satellite systems.[20] A indicates Ground-Based Augmentation System (GBAS) for satellite-based landing, which corrects GNSS signals using differential data from airport ground stations to achieve precision approach accuracies comparable to ILS (16 meters lateral, 4 meters vertical).[1] GBAS enables multiple runway approaches from a single installation and supports Category I precision.[20] B represents Localizer Performance with Vertical Guidance (LPV), an approach procedure using Space-Based Augmentation System (SBAS)-enhanced GNSS to provide ILS-like precision (16 meters lateral, 4 meters vertical) without ground-based lateral guidance.[1] LPV minima typically allow descents to 200 feet above ground level, expanding access to over 2,000 U.S. airports with SBAS like WAAS as of April 2025.[20][21]Surveillance Equipment Codes
Surveillance equipment codes in ICAO flight plans, specified in Item 10c, indicate the aircraft's transponder and automatic dependent surveillance capabilities available to air traffic control for tracking and separation.[20] These codes enable standardized communication of surveillance features, supporting secondary surveillance radar (SSR) and advanced systems like ADS-B and ADS-C, which broadcast or contract position data to enhance situational awareness.[20] The codes are prefixed with "S/" and selected based on the route's requirements, with "NIL" or "N" used when no operational surveillance equipment is carried or when it is unserviceable.[20] Basic transponder codes cover SSR operations, where Mode A provides only aircraft identity via a 4-digit code, and Mode C adds pressure-altitude reporting to Mode A for improved vertical separation.[20] Code "A" denotes Mode A transponder capability alone, suitable for identity interrogation without altitude data.[20] Code "C" indicates combined Modes A and C, enabling both identity and altitude reporting, which is the minimum for most controlled airspace.[20] Mode S transponders offer selective addressing and enhanced data exchange, with variants tailored to specific capabilities. Code "S" signifies Mode S with aircraft identification and pressure-altitude reporting, allowing addressed interrogations for reduced interference.[20] Code "P" specifies Mode S with pressure-altitude only, excluding identification.[20] Code "I" denotes Mode S with identification but no altitude capability.[20] For advanced features, code "E" includes Mode S with identification, altitude, and extended squitter for ADS-B broadcasting.[20] Codes "H" and "L" represent enhanced surveillance; "H" adds enhanced data downlinking to identification and altitude, while "L" combines it with squitter and further Mode S extensions.[20] Automatic Dependent Surveillance-Broadcast (ADS-B) codes detail out and in capabilities across frequency bands. Code "B1" indicates ADS-B out on 1090 MHz extended squitter, transmitting position derived from onboard navigation (often GNSS, as covered in navigation equipment codes).[20] Code "B2" extends this to include ADS-B in reception on the same frequency.[20] For Universal Access Transceiver (UAT), code "U1" covers ADS-B out at 978 MHz, primarily used in certain U.S. airspace, and "U2" adds in capability.[20] VHF Data Link Mode 4 uses codes "V1" for out and "V2" for in/out, supporting multilink operations in oceanic or remote areas.[20] Automatic Dependent Surveillance-Contract (ADS-C) codes apply to controller-pilot data link systems for periodic or event-based reporting. Code "D1" denotes ADS-C using FANS 1/A protocols over satellite or VHF, facilitating position contracts in non-radar environments.[20] Code "G1" specifies ADS-C via Aeronautical Telecommunication Network (ATN), offering similar contract functions with ground-initiated reporting for improved tracking accuracy.[20] The following table summarizes key surveillance codes:| Code | Description |
|---|---|
| N | No surveillance equipment carried or unserviceable.[20] |
| A | Transponder — Mode A (identity only).[20] |
| C | Transponder — Modes A and C (identity and altitude).[20] |
| S | Transponder — Mode S with identification and altitude.[20] |
| P | Transponder — Mode S with altitude only.[20] |
| I | Transponder — Mode S with identification only.[20] |
| E | Transponder — Mode S with identification, altitude, and squitter.[20] |
| H | Transponder — Mode S with identification, altitude, and enhanced surveillance.[20] |
| L | Transponder — Mode S with identification, altitude, squitter, and enhanced surveillance.[20] |
| B1 | ADS-B out using 1090 MHz extended squitter.[20] |
| B2 | ADS-B out and in using 1090 MHz.[20] |
| U1 | ADS-B out using UAT (978 MHz).[20] |
| U2 | ADS-B out and in using UAT.[20] |
| V1 | ADS-B out using VDL Mode 4.[20] |
| V2 | ADS-B out and in using VDL Mode 4.[20] |
| D1 | ADS-C using FANS 1/A.[20] |
| G1 | ADS-C using ATN.[20] |
Data Link and Performance Codes
In the ICAO flight plan format, data link and performance codes are specified in Item 10a to indicate an aircraft's capabilities for controller-pilot data communications (CPDLC) and operational approvals, enabling air traffic services to optimize routing and clearances. These codes distinguish between ground-to-air data link systems and performance-based navigation (PBN) approvals, with additional details often provided in Item 18 for precision. Unlike basic communication or navigation hardware, these codes focus on digital messaging and certification for specific airspace requirements, supporting efficient global air traffic management.[1] CPDLC codes, prefixed with "J", denote the aircraft's ability to exchange text-based messages with air traffic control for clearances, requests, and reports, reducing voice frequency congestion. The primary variant, J1, represents CPDLC via the Aeronautical Telecommunication Network (ATN) using VHF Digital Link (VDL) Mode 2, which has been required for IFR operations above FL285 in most European airspace since February 5, 2020.[1][22] Complementary FANS 1/A variants include J2 for High Frequency Data Link (HFDL) in polar areas, J3 for VDL Mode A in oceanic spaces, J4 for VDL Mode 2 in oceanic operations, J5 for INMARSAT satellite communications, J6 for MTSAT, and J7 for Iridium, providing global coverage including remote and oceanic routes. These J codes require registration of data link services in Item 18, such as DAT/1PDC for pre-departure clearances.[1] ACARS-related codes, starting with "E", indicate capabilities for automated reporting and information services via the Aircraft Communications Addressing and Reporting System, facilitating position updates and operational data without full CPDLC. E1 specifies Flight Management Computer (FMC) waypoint position reporting, which automates en-route reports to replace high-frequency voice transmissions. E2 enables Data Link Flight Information Services (D-FIS) for receiving weather and NOTAMs, while E3 supports Pre-Departure Clearance (PDC) delivery directly to the cockpit. Like J codes, E variants are detailed in Item 18 with service registrations.[1] Performance codes in Item 10a certify operational approvals for advanced navigation and separation standards. The "R" code signals PBN approval, encompassing RNAV and RNP specifications that ensure required accuracy and integrity for procedures like en-route, terminal, and approach navigation; it mandates the PBN/ subfield in Item 18 to list capabilities, such as D1 for RNAV 1 (applicable to terminal areas with all sensor inputs) or A1 for RNAV 10 (RNP 10, used in oceanic and remote airspace). The "W" code denotes Reduced Vertical Separation Minima (RVSM) approval, permitting 1,000-foot (300-meter) vertical spacing between flight levels 290 and 410 inclusive, which enhances airspace capacity and fuel efficiency in designated regions. "X" indicates legacy Minimum Navigation Performance Specification (MNPS) approval for North Atlantic tracks between flight levels 285 and 410, though it has been largely superseded by PBN standards since the 2010s. Finally, "Z" serves as a catch-all for other unlisted data link or performance capabilities, with full descriptions required in Item 18 under relevant subfields like DAT/ or NAV/.[23][1]FAA Equipment Suffixes
Suffixes Without RVSM Approval
In the FAA's domestic flight plan format (FAA Form 7233-1), single-letter suffixes appended to the aircraft type in Item 3 indicate the navigation and surveillance equipment capabilities for instrument flight rules (IFR) operations below Reduced Vertical Separation Minimum (RVSM) airspace, typically below flight level 290. These suffixes inform air traffic control (ATC) of the aircraft's transponder status and navigation aids, which directly affect separation standards, routing options, and radar identification procedures. Without a transponder, aircraft require non-radar (procedural) separation, such as 10 minutes longitudinal or 20 nautical miles, relying on pilot position reports rather than real-time radar tracking.[24][25] The following table summarizes the non-RVSM suffixes, their equipment combinations, and key operational implications:| Suffix | Equipment Combination | Operational Implications |
|---|---|---|
| /X | No DME, no transponder | Basic IFR capability limited to VOR/ILS; no radar identification, requiring non-radar separation (e.g., 10 NM or 10 minutes); suitable for short domestic routes without surveillance coverage.[24][25] |
| /T | No DME, transponder with no Mode C | Mode A transponder only for basic identification; no altitude reporting, limiting vertical separation to procedural methods; used in low-altitude en route segments.[24][25] |
| /U | No DME, transponder with Mode C | Standard for light general aviation without DME; enables radar separation (3-5 NM) with altitude data; common for VOR/ILS-equipped aircraft in terminal areas.[24][25] |
| /D | DME, no transponder | DME supports en route navigation and distance checks; no surveillance, so non-radar separation applies; useful for VOR/DME routes without secondary surveillance radar (SSR).[24][25] |
| /B | DME, transponder with no Mode C | Combines DME with basic Mode A; allows limited radar vectoring but restricts altitude-based separation; applicable for older DME-equipped aircraft.[24][25] |
| /A | DME, transponder with Mode C | Prevalent in general aviation with DME; supports full radar separation (3 NM terminal) and en route navigation; enhances flexibility in mixed-equipage airspace.[24][25] |
| /M | TACAN, no transponder | Military-grade navigation; no SSR, requiring procedural separation; primarily for DoD aircraft on compatible routes.[24][25] |
| /N | TACAN, transponder with no Mode C | TACAN with Mode A; limited to basic identification, with non-altitude-aware separation in non-radar areas.[24][25] |
| /P | TACAN, transponder with Mode C | Full TACAN integration with altitude reporting; permits radar separation similar to civilian DME ops.[24][25] |
| /Y | RNAV (no GNSS), no transponder | Basic area navigation without satellites; relies on inertial or VOR/DME for RNAV; non-radar separation limits route efficiency.[24][25] |
| /C | RNAV (no GNSS), transponder with no Mode C | Non-satellite RNAV with Mode A; allows some radar use but procedural vertical separation.[24][25] |
| /I | RNAV (no GNSS), transponder with Mode C | Enables RNAV routes with radar monitoring; standard for legacy area nav systems in domestic IFR.[24][25] |
| /V | GNSS, no transponder | GPS-equipped for precise navigation; no radar, so point-to-point clearances use non-radar standards; extends beyond traditional NAVAID coverage.[24][25] |
| /S | GNSS, transponder with no Mode C | GNSS with basic transponder; supports RNAV but limits altitude precision for separation.[24][25] |
| /G | GNSS, transponder with Mode C | Standard for modern IFR GPS aircraft; allows full radar separation and random RNAV routing; widely used for efficiency in non-RVSM airspace.[24][25] |
Suffixes With RVSM Approval
In the FAA's domestic flight plan system, aircraft approved for Reduced Vertical Separation Minimum (RVSM) operations—permitting 1,000-foot separation between flight levels 290 and 410 in designated U.S. airspace—must file specific equipment suffixes in block 3 of Form 7233-1 to indicate both RVSM authorization and compatible navigation and surveillance capabilities. These suffixes ensure air traffic controllers can verify compliance with RVSM performance standards, including altitude-keeping equipment and navigation accuracy, before granting clearance into such airspace. Unlike ICAO's single "W" code for RVSM, FAA suffixes differentiate based on onboard systems to support efficient routing and separation.[24][27] The core RVSM suffixes are /W, /Z, and /L, each paired with a transponder equipped for Mode C altitude reporting, which is mandatory for RVSM to enable precise vertical positioning. These reflect varying levels of navigation technology, from basic legacy systems to satellite-based precision, allowing operators to accurately represent their aircraft's capabilities without overclaiming advanced features. For instance, /W suits older aircraft using ground-based aids, while /L is prevalent among modern jets with GPS integration.[24] Additionally, suffixes /E and /F provide for advanced RNAV operations in domestic U.S. contexts, but their use is restricted to flights to and from U.S. airports unless explicitly authorized by the controlling authority; they denote specialized flight management systems (FMS) with DME/DME and inertial reference unit (IRU) updating, often combined with RVSM where applicable, though operators may need to pair them with other codes like /J or /K for full international compatibility. These limited suffixes support performance-based navigation in high-density domestic routes but are not intended for broad RVSM filings outside authorized scenarios.[24][15]| Suffix | RVSM Approval | Navigation Capability | Transponder | Key Application |
|---|---|---|---|---|
| /W | Yes | No GNSS, No RNAV (legacy ground-based, e.g., VOR/ILS) | Mode C | Basic RVSM for non-area navigation aircraft in domestic high-altitude ops; common for older fleets without satellite aids.[24] |
| /Z | Yes | RNAV without GNSS (e.g., VOR/DME or INS-based) | Mode C | RVSM with area navigation using non-satellite sources; suitable for aircraft relying on distance-measuring equipment for enroute precision.[24] |
| /L | Yes | GNSS (e.g., GPS-equipped) | Mode C | Advanced RVSM with satellite navigation; widely used for business and commercial jets enabling RNAV routes and approaches in RVSM airspace.[24] |
| /E | Yes (domestic restricted) | Advanced RNAV with FMS/DME/DME/IRU | Mode C | U.S.-only advanced navigation for specific authorizations; limited to domestic ops unless approved, often for FMS-updated positioning.[24][15] |
| /F | Yes (domestic restricted) | Advanced RNAV with FMS/DME/DME | Mode C | Similar to /E but focused on DME/DME updating; restricted domestic use for performance navigation in controlled U.S. airspace.[24][15] |