Interstate 74
Interstate 74 (I-74) is an east–west Interstate Highway spanning approximately 417 miles (671 km) across the Midwestern United States, with its western terminus at an interchange with Interstate 80 in Davenport, Iowa, and its eastern terminus at an interchange with Interstate 75 in Cincinnati, Ohio.[1] The route traverses four states—Iowa, Illinois, Indiana, and Ohio—serving as a vital link for commerce and travel between the Mississippi River and the Ohio River valleys.[1] The highway begins in the Quad Cities metropolitan area, crossing the Mississippi River via twin tied-arch bridges that replaced aging 1930s-era spans and opened to traffic in 2020 and 2021 as part of a $1.2 billion project to enhance safety, capacity, and regional connectivity.[2][3] In Illinois, I-74 covers 220 miles (354 km), passing through Peoria, Bloomington-Normal, Champaign, and Danville while overlapping with I-55 near Bloomington and I-57 near Champaign.[4] It then enters Indiana for 172 miles (277 km), connecting Terre Haute and Indianapolis before reaching Ohio, where a 19-mile (31 km) segment serves the greater Cincinnati area.[4] Designated as a Tier 2 nationally significant freight corridor, I-74 facilitates efficient movement of goods by linking manufacturing hubs, agricultural regions, and ports while offering an alternative to congested routes around Chicago.[1] Separate, non-contiguous segments of I-74 exist in North Carolina as of 2025, where the route is being developed along alignments of U.S. Route 74 to eventually form a continuous connection from the Midwest to the Atlantic coast as part of High Priority Corridor 5.[5] These include completed sections from the Virginia state line to near Mount Airy, from I-40 in Winston-Salem southward along I-73 to Rockingham, and from Laurinburg to Lumberton, with ongoing projects such as the Winston-Salem Northern Beltway and Rockingham Bypass aimed at connecting these segments and upgrading additional stretches to full Interstate standards for improved safety and economic access in eastern North Carolina.[5][6][7]Route description
Iowa
Interstate 74 in Iowa spans 5.36 miles (8.63 km) entirely within Scott County, forming a short urban freeway that serves as the primary east-west artery through the Quad Cities metropolitan area.[4] The segment begins at a trumpet interchange with Interstate 80 along the northern edge of Davenport, positioned near the Iowa–Illinois state line, and extends southeastward, paralleling the boundary between the cities of Davenport to the west and Bettendorf to the east.[8] This routing functions primarily as a local connector, facilitating access to residential, commercial, and industrial areas in the densely populated region without serving long-distance through-traffic beyond its connection to I-80.[9] The freeway features limited interchanges to maintain efficient urban flow, including Exit 1 for 53rd Street in Davenport, which provides entry to local neighborhoods and businesses, and Exit 2 for U.S. Route 6 (Kimberly Road/Spruce Hills Drive) in Bettendorf, connecting to key commercial corridors and the eastern suburbs.[10] There are no additional major junctions along the route, emphasizing its role as a brief transitional link rather than a high-capacity corridor. The path follows a relatively straight southeast trajectory, elevated in places to navigate the flat terrain and urban development near the riverfront. At its eastern terminus, I-74 reaches the Mississippi River and crosses into Moline, Illinois, over the Iowa–Illinois Memorial Bridge, a pair of tied-arch bridges that opened in 2020 (Iowa-bound span) and 2021 (Illinois-bound span), replacing the original 1935–1936 suspension bridges constructed to carry U.S. Route 6 across the river as a memorial to World War I veterans from both states; the original structure was expanded in 1959–1960 with a parallel span to widen capacity from two to four lanes, predating its designation as part of the Interstate Highway System.[11][12][9] As an urban freeway, the Iowa portion of I-74 handles moderate traffic volumes, with annual average daily traffic (AADT) around 50,000 vehicles in recent years, supporting regional commuting and commerce in the Quad Cities while the replacement of the bridges (completed in 2020–2021) has improved safety and flow.[13]Illinois
Interstate 74 enters Illinois from Iowa across the I-74 Bridge over the Mississippi River, landing in Moline before proceeding southeast through the Quad Cities metropolitan area, encompassing Moline and Rock Island.[4] In this region, the highway features key interchanges with I-280 near Milan and U.S. Route 6 (Avenue of the Cities) in Moline, facilitating access to local industrial and commercial districts.[14] The segment totals 220.34 miles (354.60 km), marking the longest portion of I-74 and traversing north-central Illinois from the western border at Moline to the Indiana state line east of Danville.[15] Heading eastward from the Quad Cities, I-74 cuts through rural Knox and Fulton counties before reaching Peoria, where it crosses the Illinois River via the Murray Baker Bridge as part of the Illini Expressway—the first segment of the highway completed in Illinois on December 12, 1958.[4] Near Peoria, the route intersects I-474, a short auxiliary interstate providing a bypass around the city's downtown core.[1] Continuing southeast, I-74 passes through the Bloomington-Normal area, intersecting I-55 and serving as a vital link for the region's agricultural and educational hubs, before advancing to Champaign-Urbana with connections to I-57 and I-72.[4] The highway's eastern terminus in Illinois lies amid rural farmland northeast of Danville in Vermilion County, where it crosses into Indiana as a seamless continuation toward Indianapolis.[4] Construction of the route occurred in phases primarily during the 1960s and 1970s, expanding from the initial Peoria opening to connect the state's central urban centers with surrounding rural landscapes.[16] I-74 blends urban corridors through Peoria and Champaign with expansive rural stretches that largely bypass smaller towns, reducing local congestion while carrying the state's highest volumes—exceeding 100,000 vehicles per average annual daily traffic (AADT)—in the vicinity of Peoria.[17]Indiana
Interstate 74 enters Indiana from Illinois near Danville in Hendricks County, marking the start of its 171.54-mile (276.07 km) traversal eastward to the Ohio state line near Cincinnati's suburbs. The highway initially follows a predominantly rural course through western Indiana, passing agricultural lands and small communities before intersecting Interstate 65 just east of Crawfordsville in Montgomery County. This interchange facilitates connections to central Indiana and points north, including Lafayette.[18][4] Approaching Indianapolis, I-74 shifts northward, bypassing the urban core via a 52-mile concurrency with the northern and eastern segments of Interstate 465, the city's outer beltway loop. This routing avoids downtown congestion, providing access to key interchanges such as Interstate 70 on the northwest side, the planned extension of Interstate 69 near the northeast interchange, and U.S. Route 36 (Rockville Road) west of the city. Beyond the beltway, I-74 resumes an independent path southeastward through Shelbyville and Greensburg, traversing rural farmland and rolling terrain in Shelby, Decatur, and Ripley counties before reaching the Indiana–Ohio line near Harrison.[18][19] Construction on I-74 in Indiana began in 1958 as part of the early Interstate Highway System development, with segments opening progressively through the 1960s; the route was fully completed across the state in 1967, making it the first such highway to span Indiana end-to-end. The Indianapolis bypass segment along I-465 was finalized later, integrating with the beltway's completion to enhance regional mobility. The corridor remains largely rural outside the Indianapolis metro area, though suburban development has intensified along the I-465 overlap, where average annual daily traffic reaches peaks of approximately 150,000 vehicles. As a designated commerce corridor, I-74 supports vital freight movement between Midwestern manufacturing hubs and eastern markets.[20][4][21][1]Ohio
Interstate 74 (I-74) enters Ohio from Indiana near the city of Harrison in Hamilton County, marking the start of its 19.47-mile (31.33 km) segment through the state's southwestern corner.[22] The highway runs concurrently with U.S. Route 52 (US 52), known locally as the Cincinnati-Batavia Pike, throughout its entire Ohio length, providing a direct urban corridor into the Cincinnati metropolitan area.[23] This concurrency begins immediately at the state line and continues southeastward, serving as a key link for regional freight and commuter traffic between the Midwest and the Ohio River valley.[1] The route progresses through the western suburbs of Cincinnati, primarily within Green Township and Colerain Township, characterized entirely by urban freeway standards with no rural sections.[24] Key interchanges include the partial cloverleaf junction with Interstate 275 (I-275), the outer beltway around Cincinnati, where I-74 briefly overlaps with I-275 for about 4 miles before diverging southeast.[25] Additional access points connect to local roads such as Winton Road in Colerain Township, facilitating suburban development and commercial access in areas like North College Hill. As an urban artery, I-74 experiences high volumes, with annual average daily traffic (AADT) exceeding 120,000 vehicles in many segments, peaking near 193,100 at the eastern end.[26] I-74 reaches its current eastern terminus at a cloverleaf interchange with Interstate 75 (I-75) in Cincinnati's College Hill neighborhood, completing the western section of the overall route and opened to traffic in 1974.[24] This endpoint, cosigned with US 52 until I-75, handles significant cross-state travel and urban distribution, though plans for an eastward extension beyond I-75 remain under consideration.[4]North Carolina
Interstate 74 in North Carolina comprises three disjoint segments totaling 124.91 miles (201.02 km), characterized by rural freeway alignments with significant gaps that prevent continuous travel along the route.[27] The highway has been signed as I-74 on these segments since 1997, despite the discontinuities and varying standards, serving lower-traffic rural areas with average annual daily traffic (AADT) ranging from 20,000 to 50,000 vehicles.[28] Primarily a four-lane divided freeway, portions include two-lane sections pending upgrades, and there is no direct connection to the western I-74 in Ohio.[5] The western segment spans about 30 miles from its interchange with I-77 near Charlotte eastward to US 52 in Winston-Salem, with cosignage alongside US 74 over select portions to facilitate regional connectivity. In February 2025, NCDOT installed I-74 signs and mile markers along the US 52 corridor in Forsyth County from Rural Hall to the northern junction with I-40, officially designating this segment as part of I-74.[28] This rural pathway traverses the Piedmont region, incorporating the ongoing Winston-Salem Northern Beltway project, a 34.5-mile loop that links US 158 southwest of the city to existing I-74 southeast of it and remains under construction as of 2025.[6] Further east, the central segment covers approximately 60 miles from its junction with I-40 near Greensboro southeastward to Hamlet, emphasizing improved access through the Sandhills area via cosignage with I-73 and US 220. A key recent addition is the 7.2-mile Rockingham Bypass, a four-lane median-divided freeway that opened on January 28, 2025, bypassing the city of Rockingham and enhancing connections to US 74 for freight and local traffic.[7] The eastern segment extends about 35 miles from Laurinburg eastward to Lumberton, fully cosigned with US 74 and winding through the rural Pee Dee River region of the Coastal Plain, supporting agricultural and light industrial transport with interchanges at key towns like Maxton.[29] Gaps persist between the western and central segments, where a proposed I-74 designation along US 311 from Winston-Salem to Greensboro aims to bridge the approximately 25-mile divide, while the eastern end holds potential for extension toward the South Carolina border to complete the corridor.[30]History
Western section (Iowa to Ohio)
Interstate 74's western section was planned as part of the Bureau of Public Roads' 1955 Yellow Book, which outlined a continuous route from Davenport, Iowa, to Cincinnati, Ohio, to enhance national connectivity along corridors paralleling historic trails like the National Road. This planning aligned with post-World War II efforts to address growing freight transportation needs in the Midwest, facilitating efficient movement of goods between agricultural regions and industrial centers.[31] The Federal-Aid Highway Act of 1956 provided crucial federal funding, enabling states to initiate construction on the designated alignments.[32] Early construction advanced rapidly in Illinois, where the Peoria segment, known as the Illini Expressway, opened on December 12, 1958, including the new Murray Baker Bridge over the Illinois River.[33] This marked one of the first completed interstate segments in the corridor, though it initially displaced hundreds of homes in urban Peoria to accommodate the bypass.[33] In Iowa, the Iowa-Illinois Memorial Bridge, with its second span opened in 1959, was integrated into I-74 with connections completed in 1974.[34] Construction in Indiana began in 1958, with rural sections largely completed by 1965, connecting the Illinois border eastward through less developed areas.[20] Major phases continued through the 1970s, including the completion of the I-465 bypass around Indianapolis in 1976, which rerouted I-74 around the city's core and displaced over 17,000 residents during urban clearance efforts.[35] In Ohio, the final segment from North Bend Road to I-75 in Cincinnati opened in 1974, finalizing the core alignment.[36] Key challenges included engineering complex river crossings, such as the Mississippi and Wabash Rivers, which required specialized bridge designs to handle flood-prone waterways and heavy loads.[37] Urban bypasses in Peoria and Indianapolis further complicated progress, involving extensive land acquisition and community disruptions.[38] By the late 1970s, the western section—spanning approximately 417 miles across Iowa, Illinois, Indiana, and Ohio—was fully signed and operational as a continuous interstate corridor.[1]Eastern section (North Carolina)
Interstate 74's eastern section in North Carolina consists of three disjoint segments totaling approximately 125 miles, primarily cosigned with U.S. Route 74 (US 74) and developed independently from the Midwest portions of the route starting in the 1990s.[39] The designation originated from the National Highway Designation Act of 1995, which extended I-74 eastward through the state as part of High Priority Corridor 5 under the Intermodal Surface Transportation Efficiency Act (ISTEA) of 1991, aiming to enhance connectivity in the Appalachian region.[5] This aligned with broader Appalachian Development Highway System (ADHS) goals to foster economic growth by improving access in underserved areas like the Piedmont and Sandhills regions, where the corridor supports industrial and commercial development.[40] The American Association of State Highway and Transportation Officials (AASHTO) approved the I-74 numbering on July 25, 1996, following an initial denial, enabling signage along upgraded US 74 alignments.[5] Initial construction focused on upgrading existing highways to interstate standards, with the first segments signed in 1997 near Asheboro and Randleman, replacing sections of North Carolina Highway 752 (NC 752) by 1998.[39] The westernmost segment, a 13-mile stretch from the Virginia state line near Mount Airy to US 52, opened fully in 1999 and runs concurrently with I-77 for about 4.6 miles, tying into broader regional networks while addressing traffic from the Blue Ridge Mountains.[5] In the central area, extensions from Winston-Salem to Hamlet progressed through phased upgrades; a key section from Winston-Salem to High Point, approximately 12.2 miles, opened in 1984 as US 311 and was later incorporated into I-74. The extension from High Point to Randleman was completed and signed as I-74 in June 2013, with further connections to I-73 added in the 2000s.[41][5] The eastern segment in the Laurinburg area, spanning 19 miles from Maxton to Lumberton, achieved interstate standards and opened on September 26, 2008, officially named the American Indian Highway to honor local indigenous communities.[5] A pivotal approval came in 2013, when the Federal Highway Administration permitted I-74 signage along the 17-mile US 311 corridor from I-40 near Winston-Salem to High Point, despite its substandard design elements like narrower medians and older alignments built in the 1960s.[42] This decision facilitated cosignage and economic boosts for the Triad area, though full upgrades remain ongoing. The Rockingham Bypass, a 7.2-mile four-lane divided freeway in Richmond County, began construction in the 2010s with northern phases opening in 2018; the full route from US 74 Business to Harrington Road opened on January 28, 2025, reducing congestion in the Sandhills region and connecting to I-73 south of Hamlet. Gaps persist across the roughly 300-mile proposed route through North Carolina, with about 48% completed as of March 2025, leaving unsigned interstate-standard sections like portions of NC 74 and US 52 totaling 14 miles.[39] These discontinuities, often bridged by US 74 cosignage, reflect funding priorities driven by regional economic needs, such as linking manufacturing hubs in the Piedmont to ports in the southeast. As of November 2025, the Winston-Salem Northern Beltway advances to close a major local gap, with its eastern section partially open since 2020 and further segments tying I-74 to US 52 expected by late 2026, funded partly through state bonds.[6]Future
Ohio extension
Interstate 74 currently terminates at its interchange with Interstate 75 in Cincinnati, Ohio. A proposed extension would continue the route eastward along State Route 32, designated as part of Appalachian Corridor D within the Appalachian Development Highway System, toward the West Virginia state line near Parkersburg.[43] This alignment follows an existing four-lane divided highway, spanning approximately 60 miles through Clermont, Brown, Adams, and Jackson counties.[40] Planning for the extension originated in the 1990s as part of the Appalachian Regional Commission's initiatives to enhance regional connectivity through the Appalachian Development Highway System, with early corridor studies emphasizing SR 32's role in linking urban centers to rural Appalachia.[44] Environmental assessments and impact studies for SR 32 upgrades, including alignments and mitigation measures, were conducted and largely completed during the 2010s, enabling the full 152.7-mile Ohio segment of Corridor D to open to traffic by 2024.[40] As of 2025, the Ohio Department of Transportation is participating in a multi-state $1.5 million feasibility study for the broader I-73/74/75 corridor (primarily along US 23 for I-73), set for completion by the end of 2026, with separate evaluations for designating SR 32 as I-74 and any necessary minor improvements.[45] The project encounters significant funding hurdles amid national highway trust fund deficits and competing priorities, potentially requiring $1–2 billion in federal and state investments for interstate signage, interchanges, and residual enhancements.[46] In January 2022, the Ohio House of Representatives passed a unanimous resolution urging the governor and transportation director to advance the extension, highlighting its integration into the broader I-73/74/75 corridor network.[47] The extension aims to facilitate better freight transport from Midwestern manufacturing hubs to Appalachian markets, fostering economic development, job creation, and safer travel while alleviating pressure on parallel routes.[48] It would enhance the overall interstate system's efficiency in southern Ohio.[49]West Virginia corridor
The proposed corridor for Interstate 74 (I-74) in West Virginia follows the alignment of U.S. Route 52 (US 52) from the Ohio state line near Huntington, passing through Wayne, Mingo, Wyoming, McDowell, and Mercer counties, and terminating at the Virginia state line near Bluefield, spanning approximately 130 miles.[50][51] This route incorporates the Tolsia Highway segment from Huntington to Williamson (about 51 miles) and the King Coal Highway from Williamson to Bluefield (about 78 miles), aiming to upgrade the existing two-lane highway to a four-lane divided interstate with controlled access.[50][52] Planning for the corridor began in the 1990s as part of the broader I-73/I-74 north-south corridor initiative under the National Highway System, designated as a high-priority corridor in 1991 and further specified in 1995 to enhance connectivity across Appalachia.[51] The West Virginia Legislature established the King Coal Highway Authority in 1999 to oversee development of the southern portion, dividing it into 11 segments for phased environmental reviews and design, with initial approvals completed by the early 2000s.[51][53] These efforts align with the Appalachian Development Highway System, prioritizing economic revitalization in coalfield regions through improved infrastructure.[40] As of November 2025, construction remains limited, with no full interstate designation or continuous build along the corridor; instead, progress involves isolated upgrades to US 52.[54] The 12-mile Red Jacket segment of the King Coal Highway opened in 2011, and recent advancements include bids awarded in 2024 for a 2.5-mile section from Airport Road to Littlesburg in Mercer County; the project faced delays and was on hold as of August 2025, but a permit approval in September 2025 allows resumption, with construction expected to begin thereafter.[51][55][56] Timber clearing for a related 2.5-mile segment in Bluefield began in May 2025.[57] Other sections, such as 4.3 miles from Littlesburg to Montcalm and 9 miles of the Tolsia Highway north of Prichard, are in final planning or preliminary design, but the overall project faces delays. As of November 2025, construction on the Airport Road to Littlesburg segment has not yet been confirmed to have started post-permit, with ongoing coordination for the corridor.[54] Estimated costs for the King Coal Highway alone reached $1.6 billion in 2004 dollars, exacerbated by funding shortages, economic recessions, and the challenges of constructing through mountainous terrain, including environmental reviews and right-of-way acquisition.[51][58] The primary goals of the corridor are to bridge the gap between the western I-74 segments in Ohio and the eastern extensions in Virginia and North Carolina, fostering economic development by providing direct interstate access to isolated southern West Virginia communities for freight, tourism, and job growth.[59][58] This connectivity is expected to stimulate industries like advanced energy and regenerative agriculture while addressing safety issues on the narrow, winding US 52.[59][60]North Carolina completions
In North Carolina, efforts to complete Interstate 74 (I-74) focus on closing key gaps to create a continuous eastern route from the state's western segments to the South Carolina border. A primary gap spans approximately 20 miles between Winston-Salem and Greensboro, with proposals to align the route along U.S. Highway 311 (US 311) for upgraded freeway standards.[6] Additionally, a potential southern extension from Lumberton aims to connect directly to South Carolina, enhancing access toward Myrtle Beach and completing the interstate's southeastern terminus.[5] Major projects include the Winston-Salem Northern Beltway, a 34.5-mile loop under construction since the 2020s that incorporates an I-74 segment on its eastern side. This beltway, beginning at US 158 southwest of Winston-Salem and ending at existing I-74 southeast of the city, addresses connectivity gaps around the Triad region, with partial openings projected for 2026.[6] Complementary upgrades to US 311 involve redesignation and signage improvements as I-74, including work that began in early 2025 on new interstate shields and mile markers in Forsyth County to formalize the route from near Rural Hall to High Point.[28] As of November 2025, the Rockingham Bypass, a 7.2-mile four-lane freeway designated as future I-73/I-74, opened on January 28, 2025, from US 74 Business to Harrington Road, effectively closing the central gap between Rockingham and Hamlet.[61] Remaining completions, including full US 311 enhancements and southern extensions, are estimated to cost over $500 million, funded through state transportation priorities. These initiatives support the broader goal of linking North Carolina's I-74 segments to the proposed I-73/I-74 corridor through Virginia and West Virginia, enabling a near-coast-to-coast connection from Iowa's Mississippi River crossing to the Atlantic seaboard.[62]Supplementary information
Western Section
Iowa
I-74 in Iowa spans approximately 5.4 miles from the western terminus at I-80 in Davenport to the Illinois state line near Moline. The exits are numbered sequentially from 0 to 4. The following table lists all interchanges eastbound.[10]| Mile | Exit | Destinations | Notes |
|---|---|---|---|
| 0.0 | 0 | I-80 – Des Moines, Chicago | Western terminus of I-74; cloverleaf interchange |
| 1.0 | 1 | 53rd Street – Davenport | Local access to Davenport |
| 2.0 | 2 | US 6 (Kimberly Road) – Davenport, Spruce Hills Drive – Bettendorf | Access to Quad Cities attractions |
| 3.0 | 3 | Middle Road – Bettendorf, Locust Street – Davenport | Serves Putnam Museum |
| 4.0 | 4 | US 67 (Grant Street) – Bettendorf | Access to Bettendorf riverfront |
| 5.4 | – | Illinois state line (continues as I-74) | Crosses Mississippi River via I-74 Bridge |
Illinois
I-74 in Illinois extends 220 miles from the Iowa state line near Moline to the Indiana state line near Danville. Exits are mile-based, starting at 0. The table below lists major interchanges eastbound, focusing on key destinations; full list includes over 50 exits. Data sourced from state highway guides.[63]| Mile | Exit | Destinations | Notes |
|---|---|---|---|
| 0.0 | – | Iowa state line | Continuation from Davenport, IA |
| 1 | 1A-B | IL 92 – Moline, River Drive | Access to John Deere Pavilion |
| 4 | 4A-B | IL 5, John Deere Expressway – Moline | Serves Quad City International Airport |
| 5 | 5A-B | I-280 – Rock Island, Peoria | Partial cloverleaf |
| 14 | 14A-B | I-280, I-80 – Chicago | Full access interchange |
| 24 | 24 | IL 81 – Kewanee | Rural access |
| 32 | 32 | IL 17 – Woodhull | Access to Black Hawk College |
| 46 | 46A-B | US 34 – Galesburg, Monmouth | Divided exits for east/west |
| 48 | 48 | Main Street – Galesburg | Serves Knox College |
| 82 | 82 | Kickapoo Creek Road – Brimfield | Local rural exit |
| 87 | 87A-B | I-474, IL 6 – Peoria | Access to Peoria International Airport |
| 92 | 92A-B | IL 40 – Peoria | Downtown Peoria access |
| 95 | 95A-B | US 150, IL 29 – East Peoria | Riverboat casino access |
| 99 | 99 | I-474 – Bartonville | Loop interchange |
| 101 | 101 | I-155 – Lincoln | Southern spur |
| 127 | 127 | I-55 – Bloomington, St. Louis/Chicago | Major junction; trumpet interchange |
| 135 | 135 | IL 47 – Gibson City | Rural |
| 165 | 165 | US 51 – Clinton | Access to Decatur |
| 179 | 179 | IL 49 – Rantoul | Local |
| 197 | 197 | US 45 – Champaign | University of Illinois access |
| 205 | 205 | I-57 – Champaign, Effingham | Stack interchange |
| 220 | 220 | Indiana state line | Continuation to Danville, IN |
Indiana
I-74 in Indiana covers 171.54 miles (276.07 km) from the Illinois state line near Danville to the Ohio state line near Harrison. Exits are mile-based from 0. The table lists all interchanges eastbound. Data from official INDOT interchange guide.[19]| Mile | Exit | Destinations | Notes |
|---|---|---|---|
| 0.0 | – | Illinois state line | Continuation from Danville, IL |
| 1 | – | Spring Creek Welcome Center | Eastbound rest area |
| 4 | 4 | SR 63 – Newport, Terre Haute | Access to Wabash River area |
| 8 | 8 | Springtown Road – Covington | Local rural |
| 15 | 15 | US 41 – Veedersburg | Major north-south route |
| 18 | – | Weigh Station | Commercial vehicle inspection |
| 23 | – | Fountain County Rest Area | Facilities for travelers |
| 25 | 25 | SR 25 – Waynetown | Local |
| 34 | 34 | US 231 – Crawfordsville | Access to Purdue University area |
| 39 | 39 | SR 32 – Crawfordsville | County seat |
| 52 | 52 | SR 75 – Jamestown | Rural |
| 57 | – | Boone County Rest Area | Westbound only in some sections |
| 58 | 58 | SR 39 – Lizton | Local |
| 61 | 61 | CR 275 E – Pittsboro | Local |
| 66 | 66 | SR 267 – Brownsburg | Suburban access |
| 68 | 68 | Ronald Reagan Parkway – Brownsburg | Commercial area |
| 73 | 73 | I-465, Crawfordsville Road – Indianapolis | Beltway junction |
| 94 | 94 | I-465, US 421, Southeastern Avenue – Indianapolis | Eastern beltway access |
| 96 | 96 | Post Road – Indianapolis | Suburban |
| 99 | 99 | Acton Road – Indianapolis | Local |
| 101 | 101 | Pleasant View Road – Indianapolis | Industrial |
| 103 | 103 | London Road – Franklin | Local |
| 109 | 109 | Fairland Road – Fairland | Rural/suburban |
| 113 | 113 | SR 9 – Shelbyville | County seat |
| 116 | 116 | SR 44 – Shelbyville | Local |
| 119 | 119 | SR 244 – Manilla | Rural |
| 123 | 123 | County Line Road – Arlington | County line |
| 132 | 132 | US 421 – Greensburg | North-south access |
| 134 | 134 | SR 3 – Greensburg | Local |
| 143 | 143 | 850 E Road – Newpoint | Rural |
| 149 | 149 | SR 229 – Batesville | Local |
| 151 | – | Batesville Rest Area | Facilities |
| 156 | 156 | SR 101 – Sunman | Rural |
| 164 | 164 | SR 1 – St. Leon | Local |
| 169 | 169 | US 52 – West Harrison | Access to Cincinnati area |
| 171.54 | – | Ohio state line | Continuation to Cincinnati, OH |
Ohio
I-74 in Ohio runs 19.47 miles (31.33 km) from the Indiana state line near Harrison to its eastern terminus at I-75 in Cincinnati. Exits are sequential from 1 to 9. The table lists all interchanges eastbound. Data compiled from state transportation guides and highway logs as of 2025.[64][65]| Mile | Exit | Destinations | Notes |
|---|---|---|---|
| 0.0 | – | Indiana state line | Continuation from West Harrison, IN |
| 1.05 | 1 | New Haven Road – Harrison | Local access to Harrison |
| 3.18 | 2 | US 52 (Harrison Avenue) – Harrison | Signed as west end of concurrency with US 52 |
| 5.18 | 3 | I-75 – Dayton, Downtown Cincinnati | Partial cloverleaf; major junction |
| 6.78 | 4 | US 127 (Kilby Road) – Colerain Township | North to Hamilton |
| 8.96 | 5 | I-275 – Dayton, Covington, KY | Connector to Kentucky; Exit 84 on I-275 |
| 11.39 | 6 | Blue Rock Road – White Oak | Access to Tri-County Mall area |
| 14.09 | 7 | North Bend Road – Cheviot | Suburban access |
| 17.00 | 8 | US 52 (Blue Rock Road) – Cincinnati | End of US 52 concurrency |
| 18.94 | 9 | I-75 – Toledo, Downtown Cincinnati | Eastern terminus of I-74; stack interchange with I-75 |
| 19.47 | – | Merges with I-75 north | End of route |
Eastern Section
North Carolina
The eastern section of I-74 in North Carolina is discontinuous, spanning about 125 miles in segments: western (VA border to I-40 near Winston-Salem), central (I-40 to I-73 near Asheboro), and eastern (US 74 overlap to I-95 near Lumberton, with extensions under construction as of 2025). Exits are mile-based per segment, with recent renumbering in 2024-2025 for consistency with I-73 cosigning. The table lists current and completed interchanges eastbound by segment; proposed exits noted. Data from NCDOT updates.[28][66] Western Segment (VA Border to I-40, ~106 miles)| Mile | Exit | Destinations | Notes |
|---|---|---|---|
| 0.0 | – | Virginia state line (I-77) | Western terminus; continues from VA |
| 5 | 5 | I-77 south – Statesville | Partial interchange |
| 6 | 6 | NC 89 – Mount Airy | Local access |
| 8 | 8 | Red Brush Road | Rural |
| 11 | 11 | US 601 – Dobson, Mount Airy | Surry Community College |
| 18 | 18 | US 52 north – Mount Airy | Northern spur |
| 21 | 21 | Cook School Road | Recent renumbering (2025) |
| 22 | 22 | US 52 Business – Pilot Mountain | Business loop |
| 29 | 29 | Pinnacle Church Road – Pinnacle | Rural |
| 35 | 35 | NC 66 – King | Local |
| 41 | 41 | US 52 – Winston-Salem | Major junction to I-285 |
| 55 | 55 | NC 8 – Rural Hall | Local |
| 106 | 106 | I-40 – Winston-Salem, Greensboro | End of western segment |
| Mile | Exit | Destinations | Notes |
|---|---|---|---|
| 0.0 | – | I-40 junction (Winston-Salem) | Start of central segment |
| 42 | 42 | University Parkway – Winston-Salem | Local |
| 49 | 49 | NC 150 – Kernersville | Eastern loop access |
| 55 | 55 | US 311 – High Point | Business access |
| 65 | 65 | I-85 Business – Greensboro | Urban |
| 75 | 75 | NC 68 – Oak Ridge | Rural/suburban |
| 79 | 79 | Cedar Square Road – Randleman | Local |
| 86 | 86 | I-73/US 220 north – Asheboro | Cosigned; end of central segment |
| Mile | Exit | Destinations | Notes |
|---|---|---|---|
| 0.0 | – | I-73/US 220 junction (mile 87 from west) | Start; cosigned with I-73 |
| 22 | 22 | NC 24/27 – Rockingham | Recent bypass (2025) |
| 25 | 25 | US 220 – Ellerbe | Southern access |
| 28 | 28 | Millstone Road – Ellerbe | Local |
| 44 | 44 | NC 211 – Aberdeen | Pinehurst area |
| 49 | 49 | NC 690 – Southern Pines | Local |
| 95 | – | Approximate to US 1 – Southern Pines | Military access (Fort Liberty); partial designation |
| 103 | – | Approximate to I-95 – Fayetteville, Lumberton | Major junction; under construction extension |
| 115 | – | Approximate to US 301 – Lumberton | Local overlap with US 74 |
| 120 | – | Approximate to NC 211 – Maxton | Local |
| ~125 | – | Proposed to Wilmington/SC border | Planned corridor; partial construction as of 2025; miles approximate due to ongoing upgrades |
Lengths by state
Interstate 74 spans a total of 541.62 miles (871.85 km) across five states, with the continuous western section measuring 416.71 miles (670.85 km) from Iowa to Ohio and the disjoint eastern section in North Carolina totaling 124.91 miles (201.02 km). These lengths reflect completed segments as of November 2025, incorporating recent designations and constructions in North Carolina but excluding proposed future extensions. The distribution highlights Illinois as the longest segment, reflecting its central role in connecting the Midwest, while Iowa's brief urban portion underscores the route's focus on major population centers.| State | Miles (km) | Notes |
|---|---|---|
| Iowa | 5.36 (8.63) | Entirely urban in the Quad Cities area, connecting I-80 in Davenport to the Mississippi River bridge. |
| Illinois | 220.34 (354.60) | Northwest-southeast traverse from Moline to Danville, serving Peoria and Champaign-Urbana. |
| Indiana | 171.54 (276.07) | Crosses the state from the Illinois border near Danville to the Ohio border near Harrison, passing through Indianapolis. |
| Ohio | 19.47 (31.33) | Short southeastern segment from the Indiana border to I-75 in Cincinnati. |
| North Carolina | 124.91 (201.02) | Disjoint segments, including concurrencies with I-77 near Mount Airy, the Winston-Salem Northern Beltway, and US 74 toward Wilmington; recent 2025 additions include extensions near Rural Hall and Forsyth County. |