Lotus 63
The Lotus 63 was an experimental Formula One racing car featuring four-wheel drive, developed by Team Lotus for the 1969 Formula One World Championship season.[1] Designed by Colin Chapman and Maurice Philippe, it built upon the Lotus 49 chassis design but incorporated a novel drivetrain system to better utilize the power of its Ford Cosworth DFV V8 engine, amid a short-lived trend in F1 for all-wheel-drive vehicles that also included efforts by Matra and McLaren.[2] The car first appeared (in practice) at the 1969 Dutch Grand Prix, with its racing debut at the French Grand Prix, and competed in a total of nine races, including six World Championship Grands Prix.[3][4] The Lotus 63's development stemmed from Lotus's experience with the gas turbine-powered Lotus 56 for the Indianapolis 500, aiming to address traction issues on slippery tracks with the high-output 2.99-litre Cosworth DFV engine, which produced approximately 430 horsepower at 10,000 rpm.[2] The car's aluminum monocoque chassis weighed around 1,170 to 1,200 pounds and used a Hewland five-speed gearbox integrated with a ZF transfer case for torque distribution to all four wheels via a split differential.[2] It featured a wedge-shaped body with early aerodynamic wings, elements that influenced the more successful Lotus 72 design introduced the following year.[2] In racing, the Lotus 63 was driven primarily by Jochen Rindt, Graham Hill, and John Miles, though drivers criticized its handling as unstable and understeery, dubbing it a potential "death trap" due to reliability problems and poor weight distribution from the reversed engine layout.[1] Its best result was second place for Rindt in a non-championship race, but it scored no World Championship points, with finishes including 10th at the British Grand Prix (nine laps down) and retirements due to mechanical failures.[1][2] The project was abandoned after 1969 when Formula One banned four-wheel drive for 1970, rendering the Lotus 63 a technical curiosity rather than a competitive success.[1] Today, one surviving chassis is preserved at the Barber Vintage Motorsports Museum in the United States, while the other is in a private collection.[3]Design and Development
Technical Specifications
The Lotus 63 featured an aluminium monocoque chassis constructed from 18 swg sheet, reinforced with tubular front and rear subframes for structural integrity.[2] This design evolved briefly from the Lotus 49 platform, extending the wheelbase to 98 inches while maintaining front and rear track widths of 59 inches, resulting in an overall length of 152 inches, width of 74 inches, and height of 34 inches.[2] The dry weight was approximately 1,200 pounds (544 kg), optimized for the era's Formula One regulations.[2] At the heart of the Lotus 63 was its Ferguson-designed four-wheel drive system, which integrated a torque-splitting center differential to distribute power variably between the front and rear axles, adjustable from a 50:50 split to as much as 30:70 rear bias.[2][5] This epicyclic differential took drive at a 90-degree angle from a modified Hewland gearbox positioned behind the driver, enabling effective traction across all wheels without the need for constant front engagement.[5] The system was paired with ZF limited-slip differentials initially at both ends, later simplified to an open front differential for reduced complexity.[5] Power came from a mid-mounted, naturally aspirated Ford Cosworth DFV V8 engine displacing 2,993 cc, with twin overhead camshafts, an 11:1 compression ratio, and Lucas fuel injection, delivering around 430 bhp at 10,000 rpm.[2] The engine was rotated 180 degrees to facilitate the drivetrain layout, driving through a non-synchromesh Hewland FG400 5-speed manual gearbox adapted for four-wheel drive via a ZF transfer case.[2][5] Suspension was independent double wishbone at both ends, with fabricated arms, inboard coil spring/damper units, and anti-roll bars for front and rear control.[2] Braking employed inboard Girling ventilated disc brakes on all four wheels, measuring 10.5 inches in diameter and 1.125 inches thick, providing robust stopping power integrated into the compact drivetrain packaging.[2] Aerodynamically, the Lotus 63 introduced a wedge-shaped body profile crafted from glass-reinforced plastic, tapering rearward to generate downforce and improve high-speed stability.[2] It featured initial integrated wing elements within the bodywork for enhanced airflow management, though these were later modified during development.[2]| Component | Specification |
|---|---|
| Chassis | Aluminium monocoque with tubular subframes |
| Wheelbase | 98 in (2,489 mm) |
| Track (F/R) | 59 in (1,499 mm) |
| Dry Weight | ~1,200 lb (544 kg) |
| Engine | Ford Cosworth DFV V8, 2,993 cc, 430 bhp @ 10,000 rpm |
| Gearbox | Hewland 5-speed manual, 4WD adapted |
| Suspension | Double wishbone, inboard coil springs |
| Brakes | Girling inboard ventilated discs, 10.5 in diameter |