Avro York
The Avro York was a British heavy transport aircraft developed by A.V. Roe and Company (Avro) during the Second World War, derived from the Lancaster bomber's wings, tailplane, engines, and undercarriage but featuring a new rectangular semi-monocoque fuselage for cargo and passenger roles.[1][2][3] Designed by Roy Chadwick to meet Air Ministry specifications C.1/42 for military transport needs (OR.113) and 19/44 for civil variants (OR.190), the York prototype (Type 685) made its maiden flight on 5 July 1942 from Ringway, Manchester, with initial production deliveries to the Royal Air Force (RAF) beginning in 1943.[1][2][3] Early models addressed stability issues through a triple-finned tail unit, and a total of 258 aircraft were built by November 1946, including 208 military C.Mk.I variants powered by four Rolls-Royce Merlin XX engines (each 1,280 hp), with later civilian models using Rolls-Royce Merlin engines with civil ratings.[2][3] The York entered RAF service in early 1944 with squadrons such as No. 511 at RAF Lyneham, serving in transport roles across Europe, the Middle East, and the Far East, including VIP duties—one prototype, LV633, was used by Prime Minister Winston Churchill.[1][3] Post-war, it played a pivotal role in the 1948–1949 Berlin Airlift, where RAF Yorks completed 58,124 of the service's 131,800 total sorties, delivering over one million tons of supplies to West Berlin amid the Soviet blockade.[1] Civilian operators, including British Overseas Airways Corporation (BOAC) from February 1944 and British South American Airways (BSAA), utilized the type for routes to Africa, South America, and Australia until the mid-1950s, when it was phased out in favor of more modern post-war transport aircraft.[1][2] With a maximum speed of 298 mph, a range of approximately 3,000 miles, and capacity for up to 16,500 lb (7,500 kg) of freight or 56 passengers, the York measured 78 ft 6 in in length, had a wingspan of 102 ft, and reached a service ceiling of 23,000 ft, making it a versatile workhorse despite its origins in bomber technology.[2][3] Exports went to Australia, France, and South Africa, and while most were scrapped by the 1960s, a preserved example (TS798) is displayed at the RAF Museum Midlands.[1][2]Development
Origins
In 1941, the Royal Air Force Bomber Command identified a pressing need for heavy transport aircraft capable of ferrying supplies and personnel across oceans to support wartime operations, prompting the development of adaptations from existing bomber designs.[1][3] Avro responded by adapting the Avro Lancaster's four-engine layout, wing, and tailplane for both civilian and military transport roles, with the project initiated under Air Ministry Specification C.1/42 to meet Operational Requirement OR.113 for an interim heavy transport aircraft.[3][4] The effort was led by chief designer Roy Chadwick, who began initial sketches of the Avro Type 685 York in 1941, leveraging Lancaster components to expedite development amid wartime constraints.[1][5] The prototype, serial LV626, conducted its first flight on 5 July 1942 from Manchester's Ringway Aerodrome, piloted by Avro's chief test pilot Harry Brown, marking the transition from sketches to flight testing.[4][5] Early evaluations focused on the aircraft's load capacity and range, confirming its potential for transoceanic operations with a maximum takeoff weight approaching 68,000 pounds.[3][6] Key modifications from the Lancaster included a new rectangular, squared-off fuselage with a semi-monocoque structure and flush-riveted aluminum skin to optimize cargo and passenger accommodation, while retaining the bomber's Rolls-Royce Merlin engines, undercarriage, and mainplane for commonality and rapid production.[1][3] This design emphasized a spacious hold capable of carrying up to 10,000 pounds of freight or dozens of troops, with the initial twin-finned tail later refined in subsequent prototypes for improved stability.[6][3]Production
In 1942, the Air Ministry awarded Avro a contract for 200 York aircraft to meet wartime transport needs, building on the Lancaster's design heritage for rapid adaptation to production lines.[7] Manufacturing commenced at Avro's primary facility in Woodford, Cheshire, with additional assembly at the Yeadon airfield site near Leeds and Ringway.[3] The first production Yorks were delivered to the Royal Air Force in March 1943, marking the transition from prototypes to operational output.[8] Production faced significant wartime obstacles, including acute shortages of critical materials like high-grade alloys and engines, which were prioritized for frontline bombers such as the Lancaster.[9] Labor constraints further delayed scaling, as skilled workers were diverted to higher-priority bomber assembly, resulting in a slow buildup that saw only a fraction of the initial contract fulfilled by mid-1944.[7] Despite these hurdles, a total of 258 aircraft were completed between 1943 and 1948, encompassing military transports and adaptations for emerging roles.[10] Post-war, production persisted to fulfill civilian orders, sustaining Avro's workforce and facilities amid the shift from military to commercial aviation.[1] Exports included units supplied to operators in Canada, where surplus RAF Yorks entered service with the RCAF and Canadian civil operators such as Transair, and to Australia for use by Qantas on imperial routes.[2] This extension provided economic stability for Avro, with estimated unit costs around £50,000 per aircraft helping to offset wartime overruns and fund postwar diversification, though exact figures varied with material fluctuations.[9] The final York rolled off the line in April 1948, concluding a program that bridged Avro's bomber legacy into the civil sector.[11]Design
Airframe and Structure
The Avro York's fuselage was a key structural innovation, lengthened to 23.9 meters (78 ft 6 in) compared to its Lancaster predecessor and featuring a rectangular cross-section to maximize internal volume for transport duties. This design allowed for a cargo capacity of up to 16,500 lb (7,484 kg), facilitated by large hydraulically operated freight doors on the starboard side—typically 10 ft wide by 5 ft high—and reinforced aluminum floors capable of supporting heavy loads such as vehicles or pallets. The semi-monocoque fuselage was constructed in five main sections for ease of assembly and maintenance, with the forward section housing the crew compartment and the aft area dedicated to cargo or passenger space, ensuring durability under the stresses of frequent loading and unloading in operational environments.[6][12].pdf) The wings were directly adapted from the Lancaster bomber, retaining a span of 31.1 meters (102 ft) and a total area of approximately 113 m² (1,216 sq ft), which provided a high aspect ratio of about 8.5 for enhanced lift efficiency and long-range performance in transport missions. This elliptical-planform design, with its tapered outer panels and dihedral angle, contributed to stable handling during heavy loads, while the all-metal stressed-skin construction using aluminum alloy ensured structural integrity against the rigors of global operations. The wings incorporated integral fuel tanks and were mounted mid-fuselage, integrating seamlessly with the empennage for overall aerodynamic balance.[6][13][14] Military variants of the York included provisions for defensive armament, consisting of twin .303 in (7.7 mm) Browning machine guns mounted in hydraulically operated Nash & Thompson turrets located in the nose, dorsal, and tail positions, mirroring the Lancaster's setup to provide 360-degree coverage against interceptors. The typical operating crew comprised five members—a pilot, co-pilot, navigator, radio operator, and loadmaster—with accommodations in the pressurized forward fuselage, including rest bunks and galley facilities for extended flights. The design also supported troop transport, with bench seating arrangements allowing for up to 56 soldiers or paratroops in the main hold, though many civilian versions omitted armament to prioritize payload. Civilian variants could accommodate up to 56 passengers in a typical configuration. The entire airframe employed primarily high-strength aluminum alloys in a stressed-skin monocoque structure, offering lightweight yet robust resistance to fatigue and corrosion in diverse climates.[9][14][1][15]Powerplant and Performance
The Avro York was powered by four Rolls-Royce Merlin XX inline V-12 liquid-cooled piston engines, each delivering 1,280 horsepower for takeoff.[11] These engines were housed in underwing nacelles and drove de Havilland Hydromatic three-bladed constant-speed fully feathering propellers to optimize performance across varying flight conditions.[16] Fuel was stored in seven tanks integrated into the wing structure between the spars, providing a standard capacity of 2,478 imperial gallons (11,270 liters).[7] This configuration supported a maximum range of approximately 3,000 miles (4,800 km) when carrying a typical payload, making the York suitable for long-distance transport operations across theaters like the North Atlantic and during the Berlin Airlift.[16][2] In terms of performance, the York achieved a cruising speed of 210 mph (338 km/h) at 10,000 feet (3,050 m) under maximum continuous power, balancing efficiency for extended flights with its heavy-lift role.[7] The service ceiling reached 23,000 feet (7,010 m), while the takeoff run required about 1,200 yards (1,100 m) under loaded conditions on standard runways, enabling operations from forward bases despite its size.[11] The aircraft's payload capacity was 10,000 pounds (4,536 kg) for normal operations, sufficient for freight or up to 56 troops, though overloads up to 20,000 pounds (9,072 kg) were possible for shorter routes at the expense of range.[17][15] Avionics included standard Royal Air Force installations such as TR.9D radio sets for communication, a radar altimeter for low-level approaches, and an astrodome in navigation-equipped variants to facilitate celestial fixes during overwater flights.[1]Operational History
Military Service
The Avro York entered Royal Air Force service in 1943, initially with No. 511 Squadron at RAF Lyneham, where it performed Atlantic ferry duties and troop transport missions to support Allied operations.[1][10] These roles leveraged the aircraft's capacity for long-range flights, carrying personnel and supplies across challenging oceanic routes amid wartime demands.[18] In preparations for the D-Day landings in June 1944, Yorks were utilized for subsequent supply runs to continental Europe, serving in general logistics roles.[2] Following the Normandy invasion, the aircraft supported post-landing operations by delivering essential supplies to advancing forces in Europe, serving as early precursors to large-scale airlift efforts, while also reinforcing British positions in the Far East against Japanese forces through trooping and cargo flights.[2][9] A total of 208 Yorks were produced for RAF military use during World War II, forming a key component of Transport Command's fleet across 10 squadrons by war's end.[3][10] The type endured attrition during wartime service, with several aircraft lost to severe weather conditions and operational hazards, alongside limited instances of enemy action, reflecting its non-combat transport profile.[19][2] Post-war, Yorks played a pivotal role in the 1948–1949 Berlin Airlift, where RAF examples completed 58,124 of the service's 131,800 total sorties, delivering over 100,000 tons of supplies to West Berlin amid the Soviet blockade.[1] As demobilization progressed after 1945, Yorks were reassigned to reserve squadrons by 1946, with remaining operational examples supporting troop movements and evacuations in the Palestine Mandate amid escalating regional tensions.[1][9]Civilian Service
The Avro York transitioned to civilian service during World War II with British Overseas Airways Corporation (BOAC), which received the first dedicated civilian example, G-AGJA, on 21 February 1944, initially built to military standards but repurposed for commercial operations. BOAC deployed the type to replace the less capacious Lancastrian on long-haul routes, inaugurating a UK-Morocco-Cairo service on 22 April 1944 using five early production aircraft diverted from RAF stocks. The airline expanded its fleet to 25 Yorks, employing them for passenger and freight services to West Africa, India, and South Asia, including the demanding Springbok route to South Africa, where their robust design proved reliable despite the unpressurised cabin and basic accommodations.[20][21][9] Following the war's end in 1945, surplus military Yorks enabled broader commercial adoption, with British South American Airways (BSAA) operating the type from 1946 on the South Atlantic route to Buenos Aires, initially for cargo charters to Venezuela before scheduled passenger and freight services. Skyways Ltd acquired two Yorks for post-war cargo operations to South America, leveraging the aircraft's 10,000 lb payload capacity over challenging terrains. These expansions highlighted the York's versatility in high-capacity, long-range roles, generating revenue on underdeveloped routes where its lower acquisition cost from surplus stocks offset higher operating expenses compared to emerging competitors like the Douglas DC-4, which offered better speed, range, and passenger comfort by the late 1940s, prompting phase-out on major passenger services.[7][22] In Canada, surplus Yorks found extensive civilian use from the late 1940s, particularly by operators such as Associated Airways, Maritime Central Airways, and Pacific Western Airlines for northern supply missions, including freight deliveries during the construction of the Distant Early Warning (DEW) Line radar network in the late 1950s. These rugged operations capitalized on the York's ability to handle short, unprepared airstrips in harsh Arctic conditions, supporting remote communities and infrastructure projects until more modern types displaced them in the early 1960s. Most Yorks were withdrawn from passenger service by 1950, though BOAC continued limited use until 1957 and freight operators like Skyways and Dan-Air persisted into 1964, marking the end of routine commercial operations.[23][8][9]VIP Transport
The Avro York served in specialized VIP configurations for high-profile government and royal duties during and immediately after World War II. One notable example was the third prototype, serial LV633, converted to C.(VIP) Mk. I standard and named "Ascalon" for Prime Minister Winston Churchill's personal transport from 1943 to 1945.[7] This aircraft facilitated Churchill's travels to critical wartime conferences, including the Tehran Conference in November 1943, where Allied leaders coordinated strategy against Axis powers, and the Yalta Conference in February 1945, which shaped post-war Europe.[24][25] "Ascalon" featured modifications such as square windows for improved visibility and was the first York with triple tail fins for enhanced stability, underscoring its role as a secure flying conference room.[7] King George VI also utilized "Ascalon" for official tours, including a 1943 visit to British troops in North Africa and the Mediterranean, where the aircraft's long-range capabilities enabled discreet and efficient travel.[7][26] Later VIP Yorks incorporated luxury interiors to accommodate up to 20 passengers in comfort, with dedicated seating, sleeping berths, and dining facilities tailored for extended flights.[7] Additional Yorks were adapted for other prominent figures in the post-war era, such as Field Marshal Bernard Montgomery, who used MW101 during his 1947 tour of Africa, landing at sites like RAF Heany in Southern Rhodesia to inspect Commonwealth forces.[22] Similar VIP variants transported Commonwealth leaders, including South African Prime Minister Jan Smuts, emphasizing the aircraft's versatility for diplomatic missions.[22] These configurations often included reinforced floors to support secure communications equipment, such as radio sets and cipher machines, alongside enhanced passenger amenities like insulated cabins and onboard galleys.[7] The VIP fleet of Avro Yorks was gradually retired in the 1950s as faster jet aircraft became available, with replacements including turboprops like the Vickers Viscount and eventually long-range jets such as the Vickers VC10, which entered royal service in the 1960s for superior speed and range.[26]Variants
Transport Variants
The York C.I served as the primary military transport variant of the Avro York, featuring a redesigned rectangular fuselage with large clamshell cargo doors on the starboard side to facilitate loading of freight, vehicles, or up to 173 troops. Powered by four Rolls-Royce Merlin XX inline engines each producing 1,280 horsepower, it retained the Lancaster bomber's wing structure for a maximum takeoff weight of 74,000 pounds and a range of approximately 2,700 miles with a 10,000-pound payload. A total of 208 York C.I aircraft were produced for the Royal Air Force, with serial numbers allocated in batches including MW100 to MW149, MW161 to MW210, MW223 to MW272, and MW284 to MW333 for the initial 200 units, plus PE101 to PE108 for an additional eight.[3][2][27] The York C.II was a proposed variant intended to enhance performance in tropical climates through the substitution of four Bristol Hercules XVI radial engines, each rated at 1,615 horsepower, for the standard Merlins; this configuration addressed cooling and reliability issues in hot environments but was never produced beyond a single prototype conversion. Prototype LV626, originally fitted with twin fins, was re-engined to C.II standard in late 1943 and included a third central fin for improved directional stability due to the radials' torque effects, though trials did not lead to further development or orders.[2][3][28] The civilian transport variant was designated York I, with 44 new-build examples plus numerous conversions from surplus military C.I aircraft for operators like BOAC and BSAA. These featured strengthened floors for freight or seating for 10-24 passengers in mixed configurations, retaining the Merlin engines but with civil certifications and navigation equipment.[3] Several York C.I aircraft underwent temporary paratroop conversions during 1944 and 1945 to support airborne operations, incorporating ventral dropping doors and static lines for troop deployment. The fourth prototype, LV639, was specifically completed in this configuration for testing at the Airborne Forces Experimental Establishment at Ringway, where it demonstrated feasibility for dropping paratroopers despite challenges from propeller slipstream interference with the belly exit. These modifications were reversible and applied to operational aircraft for limited use in exercises and deployments, though the type was ultimately deemed less suitable than dedicated designs like the Stirling for large-scale parachuting.[29][7] Minor modifications to the York C.I included variations in fuel tankage to extend range for Pacific theater operations, where the standard seven wing tanks holding 2,478 imperial gallons proved insufficient for trans-oceanic routes; some aircraft received auxiliary tanks in the fuselage or bomb bay to increase capacity by up to 500 gallons, enabling non-stop flights from India to Australia. These adaptations were implemented on a small number of RAF examples allocated to No. 267 Squadron and similar units, prioritizing endurance over payload for supply missions in support of Allied forces in Southeast Asia.[3][2]Specialized Variants
Export models for the Royal Australian Air Force (RAAF) included C.I variants such as MW140 "Endeavour," configured as a VIP transport with luxury interiors for the Governor-General, HRH the Duke of Gloucester. It was operated by No. 1 Communications Flight RAAF from 1945, featuring Australian-specific navigation aids.[30][31] A total of around 208 Yorks were built, with these specialized adaptations representing a small fraction.[32]Operators
Military Operators
The Royal Air Force (RAF) was the principal military operator of the Avro York, equipping ten squadrons with the type for long-range transport duties from 1943 onward.[4] No. 511 Squadron at RAF Lyneham was the first unit to receive a full complement of Yorks, while others including Nos. 242, 246, and 59 Squadrons followed, with the aircraft serving in roles such as troop and supply transport across Europe, the Middle East, and the Far East.[10] A total of 208 Yorks were delivered to the RAF, forming the backbone of its heavy transport fleet during and after World War II. The Royal Canadian Air Force (RCAF) acquired 25 new-build Yorks in the immediate post-war period for general transport operations, including ferry flights and support for northern outposts.[23] These aircraft remained in RCAF service until 1955, when they were phased out in favor of more modern types. The Royal Australian Air Force (RAAF) operated a single York, serial MW140, from 1945 to 1947 within the Governor-General's Flight for VIP transport and crew training duties.[33] The South African Air Force (SAAF) briefly operated one York, serial 4999, as a VIP transport from 1944 until its sale in 1952, primarily supporting colonial route operations from Waterkloof Air Station.[34] The French Navy (Aéronavale) operated three ex-RAF Yorks from 1954.[7] By the late 1940s, the RAF began phasing out the York following its extensive use in the Berlin Airlift (1948–1949), with many aircraft placed in storage at units like RAF 15 Maintenance Unit and later scrapped or sold into civilian service during the early 1950s.[35] Similar disposal programs affected the Commonwealth operators, marking the end of military York operations by the mid-1950s.Civil Operators
The British Overseas Airways Corporation (BOAC) was the largest civil operator of the Avro York, acquiring 25 aircraft starting in 1944 for use on empire routes, including passenger and freight services across the Atlantic and to Asia; these were retired by 1947 as more modern types entered service.[16][36] BOAC's Yorks, registered as G-AGBB to G-AGRE among others, facilitated post-war air travel and cargo transport, carrying passengers in a 10-12 seat configuration alongside substantial freight capacity.[36] Skyways Ltd operated 3 Avro Yorks, primarily for freight services to Europe and Africa, beginning in 1946 and continuing until 1950, with some aircraft acquired as ex-RAF surplus and converted for commercial use.[16][37] These operations supported charter flights for oil companies and government contracts, leveraging the York's robust design for heavy-lift tasks in challenging environments. Trans-Canada Air Lines (TCA) utilized one Avro York for domestic Canadian routes and transatlantic services from 1945 until its withdrawal in 1952, focusing on mail, cargo, and limited passenger operations in the immediate post-war period.[16] Spartan Air Services in Canada ferried several ex-RAF Yorks from the mid-1950s, which were then operated by other companies for aerial surveying and mapping missions over remote northern territories.[7] Overall, civil operators flew about 50 Avro Yorks worldwide, with retirements accelerating in the early 1950s due to the introduction of turbine-powered aircraft like the Vickers Viscount and Lockheed Constellation, which offered superior speed and efficiency.Preservation and Legacy
Surviving Examples
Several Avro York aircraft have survived in various states of preservation, primarily as static displays or partial relics, highlighting the type's historical role in military and civilian transport. As of 2025, no airworthy examples remain, with all known survivors grounded due to structural fatigue and the high cost of restoration for such large, four-engine airframes. Preservation efforts focus on maintaining these rare artifacts for educational purposes, with recent initiatives emphasizing digital archiving of maintenance records rather than physical reconstruction.[1] The most complete survivor is TS798 (constructor's number 1223), on static display at the RAF Museum Cosford in Shropshire, United Kingdom. Originally delivered to the Royal Air Force in October 1945, it served with British Overseas Airways Corporation as G-AGNV, then Skyways Ltd., before eventual storage. The aircraft was acquired by the museum in 1972 and restored to represent the first production York, MW100, complete with an overall silver finish and period RAF markings; it underwent paint stripping and repainting during the process to ensure long-term conservation. This example underscores the York's post-war versatility.[1][37] Another intact airframe is MW232 (civil registration G-ANTK), preserved at the Imperial War Museum Duxford in Cambridgeshire, United Kingdom. Built in January 1946 and initially operated by the RAF's 242 and 511 Squadrons, including Berlin Airlift duties where it helped deliver the 100,000th ton of supplies, it suffered an undercarriage collapse in 1949 but was repaired. Later used by Fairey Aviation for in-flight refueling trials, it was donated to the Duxford Aviation Society in 1986 after serving as a scouts' bunkhouse at Lasham Airfield. The society restored it to static condition in Dan-Air London livery, representative of its 1950s civilian freight operations, and it remains accessible to the public; in September 2024, plans were announced to relocate it outdoors for better visibility, with ongoing maintenance to combat corrosion as of 2025.[9][38] In Canada, remnants of CF-HMX (ex-RAF MW119) constitute a partial survivor, with substantial wreckage including fuselage sections, wings, and engines still at its 1955 crash site near Hall Beach, Nunavut, following a takeoff accident into a snowbank during Arctic operations for Arctic Wings Ltd. The site has been documented by organizations like the Canadian Aviation Historical Society, which advocated for salvage to prevent deterioration; discussions for comprehensive recovery persisted into the late 2010s, though logistical challenges in the remote Arctic region have delayed progress. No full restoration to display condition has occurred, but 2020s efforts by institutions like the Royal Aviation Museum of Western Canada include digitizing related logs and artifacts to preserve operational history.[39][40]Accidents and Incidents
The Avro York transport aircraft was involved in numerous accidents and incidents throughout its operational life, with aviation safety records documenting approximately 87 hull-loss occurrences. Many of these were attributed to the challenges of operating a four-engine piston aircraft in diverse and often adverse conditions, including poor weather, mechanical failures, and pilot error. During World War II, the Royal Air Force (RAF) lost at least 15 Yorks to enemy action, accidents, or operational mishaps, some occurring during repatriation flights under Operation Dodge, which transported troops from Italy to the UK. These losses underscored the risks of long-range transport missions in wartime environments. One notable early incident occurred on 14 November 1944, when RAF York C.1 MW126 crashed into the French Alps near Grenoble during a flight carrying Air Chief Marshal Sir Trafford Leigh-Mallory and his staff to Italy. The aircraft encountered severe weather, including icing and turbulence, leading to loss of control and the deaths of all 10 occupants. This accident highlighted the dangers of icing in mountainous regions and prompted reviews of de-icing procedures for transport aircraft operating in cold climates. In a related wartime loss during Operation Dodge, RAF York C.1 MW116 ditched into the sea off Lampedusa, Italy, on 1 February 1945, while en route from Lydda, Palestine, to the UK with 19 passengers and crew. The cause was determined to be engine failure, resulting in 15 fatalities. This incident, part of the broader RAF effort to repatriate over 400,000 personnel, emphasized the mechanical vulnerabilities of the York under heavy load and long-distance conditions. Post-war civilian operations also saw significant mishaps. On 16 July 1947, BOAC York C.1 G-AGNR crashed near Az-Zubair, Iraq, during an approach to Basra Airport amid poor visibility. The accident, caused by pilot error in navigation and exacerbated by weather, killed all six crew members while 12 passengers survived; it led to enhanced maintenance protocols and instrument training for BOAC's fleet. Another post-war event involved Skyways York G-AHFA, which disappeared over the North Atlantic on 2 February 1953 during a trooping flight from the Azores to Gander, Newfoundland, with 39 occupants presumed lost due to undetermined causes, possibly structural failure or severe weather. This tragedy contributed to improved search-and-rescue coordination for transoceanic routes. Overall, while exact totals vary by database, around 25 fatal incidents were recorded in the immediate post-1945 period, prompting safety enhancements such as better engine reliability and weather forecasting that reduced accident rates in later years. Non-fatal ground incidents, often involving ground handling or minor mechanical issues, were also common but less comprehensively documented.[41]Specifications
Avro York C.I Technical Data
The Avro York C.I featured a crew of five. It had a capacity for 56 passengers or 10,000 lb (4,536 kg) of cargo.[10]Dimensions
- Length: 23.93 m (78 ft 6 in)[10]
- Wingspan: 31.09 m (102 ft 0 in)[10]
- Height: 5.44 m (17 ft 10 in)[10]
- Wing area: 120.49 m² (1,296 sq ft)[10]
Weights
- Empty weight: 19,069 kg (42,040 lb)[10]
- Maximum takeoff weight: 31,115 kg (68,597 lb)[10]
Powerplant
- 4 × Rolls-Royce Merlin XX V-12 liquid-cooled piston engines, 954 kW (1,280 hp) each[16]
Performance
- Maximum speed: 480 km/h (298 mph, 259 kn)[9]
- Range: 4,345 km (2,700 mi, 2,345 nmi)[16]
- Service ceiling: 7,925 m (26,000 ft)[2]