Conventional memory
Conventional memory, also known as base memory, refers to the initial 640 kilobytes (KB) of random access memory (RAM) in IBM PC-compatible computer systems, spanning addresses from 0x00000 to 0x9FFFF in hexadecimal notation.[1] This region was specifically allocated for loading the operating system, such as MS-DOS, along with device drivers, application programs, and user data, making it directly accessible by the CPU in real mode without requiring specialized memory management techniques.[2] Within this space, the lowest 1 KB (0x00000–0x003FF) holds interrupt vectors for system handlers, the next 256 bytes (0x00400–0x004FF) serve as the BIOS data area for storing configuration and status information, and the remaining approximately 639 KB (0x00500–0x9FFFF) is available for read/write operations by programs and the OS.[1]
The designation of 640 KB as the upper limit for this memory arose from the original IBM PC architecture introduced in 1981, where the total addressable memory space was 1 megabyte (MB), but the upper 384 KB (0xA0000–0xFFFFF) was reserved for hardware functions including video display buffers, ROM BIOS, and adapter cards to ensure compatibility across expansions.[1] Base configurations on the system board provided 16 KB to 64 KB of this memory, expandable up to 640 KB through additional modules in 16 KB increments via DIP switch settings and expansion slots, with access times of 250 nanoseconds and refresh cycles every 2 milliseconds.[1] In later models like the IBM PC AT (1984), the system board supported up to 512 KB, with an optional 128 KB expansion to reach the full 640 KB, and the BIOS verified its integrity during power-on self-test (POST) using interrupts like INT 12h for size reporting.[2]
This limitation became a defining constraint in early personal computing, particularly under MS-DOS, where applications were confined to this space unless extended memory specifications (such as XMS or EMS) were employed, influencing software design and the development of memory optimization tools.[3] The 8088 processor's 20-bit addressing, combined with IBM's hardware reservations, enforced this boundary to maintain system stability and interoperability, a legacy that persisted in compatible systems through the 1980s and early 1990s.[1]
Definition and Historical Context
Core Definition
Conventional memory refers to the first 640 kilobytes (KB) of system random access memory (RAM) in IBM PC-compatible systems running MS-DOS, spanning the address range from 0x00000 to 0x9FFFF. This portion is directly addressable by the operating system in real mode without requiring special memory management techniques or hardware expansions.[4][5]
In MS-DOS environments, conventional memory serves as the primary workspace for executing applications, the command interpreter (COMMAND.COM), and terminate-and-stay-resident (TSR) programs. It provides the foundational space where the operating system loads device drivers, allocates buffers, and runs user programs, with the remainder after system reservations available for software operations. The Intel 8088 processor's 16-bit addressing in real mode, combined with 20-bit physical addressing via segment:offset notation, limits the total accessible address space to 1 megabyte (MB), of which conventional memory occupies the lower 640 KB.[4][6][5]
This memory type is distinct from extended memory, which resides above 1 MB and requires protected-mode support on 80286 or higher processors for access, and from expanded memory, which follows the Expanded Memory Specification (EMS) standard and uses dedicated page frames within the 1 MB address space for swapping larger amounts of data. The upper memory area, a fragmented 384 KB region above conventional memory up to 1 MB, is generally reserved for hardware adapters and system ROM, making it unavailable for standard DOS use without reconfiguration.[4][6]
Origins in Early PC Architecture
The IBM Personal Computer (PC), introduced in August 1981, was built around the Intel 8088 microprocessor, a 16-bit processor operating in real mode with a 20-bit address bus that limited the total addressable memory to 1 MB.[7] This design choice reflected the era's hardware constraints and anticipated needs for personal computing, where the system board provided base RAM expandable from 16 KB to 256 KB, with further expansion possible via slots.[7] The 8088's segmented addressing scheme, using segment registers to form physical addresses up to 1 MB, became the foundational architecture for compatible systems.[7]
Early allocation decisions in the IBM PC reserved significant portions of the 1 MB address space for hardware-specific functions, leaving 640 KB (from 00000h to 9FFFFh) available for user programs and the operating system, known as conventional memory.[7] The upper memory area included 128 KB for video memory (A0000h to BFFFFh), supporting monochrome or color/graphics adapters, 64 KB for the BIOS ROM (F0000h to FFFFFh) containing system firmware and startup routines, and additional space for adapter ROMs (e.g., C8000h to EFFFFh in 2 KB increments identified by a 55AAh signature).[7] These reservations prioritized compatibility with peripherals and display standards, such as the MDA or CGA, over maximizing user-accessible RAM.[7]
The memory configuration evolved with the IBM PC/XT in 1983, which retained the original 1 MB address space and 640 KB conventional memory limit while adding a built-in hard disk and supporting up to 640 KB total RAM through modular expansions.[8] Standardization of the memory map ensured software compatibility across models, with the same allocations for BIOS, video, and adapters.[8] By 1984, the IBM PC/AT introduced the Intel 80286 processor, enabling up to 16 MB of RAM, yet it preserved the 640 KB conventional memory boundary within the first 1 MB for backward compatibility with existing applications and the DOS ecosystem.[2]
MS-DOS 1.0, released concurrently with the IBM PC in 1981, was specifically designed to operate within this 640 KB conventional memory constraint, loading into the low 64 KB and supporting applications up to the full 640 KB while respecting hardware reservations.[9] This architecture profoundly influenced software development practices throughout the 1980s and early 1990s, as developers optimized code for the limit until Windows 95 in 1995, which finally enabled broader 32-bit memory access while maintaining DOS compatibility modes.[9]
Memory Layout and the 640 KB Limit
Overall DOS Memory Map
The first megabyte (1 MB) of physical memory in IBM PC-compatible systems running MS-DOS is segmented into distinct regions to accommodate the operating system, applications, and hardware-mapped devices. This layout, dictated by the 20-bit address bus of the Intel 8086/8088 processors, spans addresses from 0x00000 to 0xFFFFF and forms the foundation of DOS memory management. The lower portion, known as conventional memory, provides the primary workspace for software, while the upper portion is largely reserved for system hardware, creating natural boundaries and potential gaps for optimization.[10]
In the lowest addresses, the Interrupt Vector Table (IVT) occupies the first 1 KB (0x00000–0x003FF), storing 256 four-byte pointers to interrupt service routines for hardware events and software traps. Immediately following is the BIOS Data Area (BDA) at 0x00400–0x004FF (256 bytes), which holds system configuration data such as equipment lists, timer counts, and disk parameters maintained by the BIOS. The remainder of conventional memory, from roughly 0x00500 to 0x9FFFF (totaling 640 KB), serves as the allocatable space for the DOS kernel, device drivers, the command interpreter, and user programs. During the boot process, core DOS components like IO.SYS and MSDOS.SYS load into low conventional memory, followed by items from CONFIG.SYS and AUTOEXEC.BAT; the command interpreter COMMAND.COM then loads near the top of this region, typically occupying about 50–60 KB and leaving the bulk available for applications and terminate-and-stay-resident (TSR) programs.[10][11]
The upper memory area (UMA) begins at 0xA0000 (640 KB) and extends to 0xFFFFF (1 MB total), comprising 384 KB primarily reserved for memory-mapped hardware. Video memory is allocated here at 0xA0000–0xBFFFF (128 KB), with subranges for color text (0xB8000–0xBFFFF, 32 KB) or monochrome text (0xB0000–0xB7FFF, 32 KB) and graphics modes (0xA0000–0xAFFFF, 64 KB), depending on the display adapter in use. From 0xC0000 onward, ROM code and expansion card firmware occupy segments, including the video BIOS at 0xC0000–0xC7FFF (32 KB), optional adapter ROMs in 0xC8000–0xDFFFF (96 KB) and 0xE0000–0xEFFFF (64 KB), and the system BIOS at 0xF0000–0xFFFFF (64 KB), which contains startup routines and low-level services. These fixed reservations create intermittent "holes" in the UMA—unused RAM segments between hardware areas—that can be exploited as upper memory blocks (UMBs) for loading small drivers or TSRs. An extended BIOS data area (EBDA) may also appear near the top of conventional memory (e.g., 0x9FC00–0x9FFFF) on systems with more than 64 KB of base RAM.[10][12][1]
The following textual diagram illustrates the typical segmentation (addresses in hexadecimal; sizes approximate and hardware-dependent):
Address Range Size Description
0x00000–0x003FF 1 KB Interrupt Vector Table (IVT)
0x00400–0x004FF 256 B BIOS Data Area (BDA)
0x00500–0x9FBFF ~639 [KB](/page/KB) Conventional Memory (DOS kernel, [COMMAND.COM](/page/COMMAND.COM), drivers, applications, TSRs; exact free space varies)
0x9FC00–0x9FFFF ~1 KB Extended BIOS Data Area (EBDA, if present)
0xA0000–0xBFFFF 128 KB Video Memory (text/graphics buffers)
0xC0000–0xC7FFF 32 KB Video [BIOS](/page/BIOS) ROM
0xC8000–0xDFFFF 96 KB [Expansion Card](/page/Expansion_card) ROMs/Adapter [Firmware](/page/Firmware) (optional)
0xE0000–0xEFFFF 64 KB [Expansion Card](/page/Expansion_card) ROMs/Adapter [Firmware](/page/Firmware) (optional)
0xF0000–0xFFFFF 64 KB System [BIOS](/page/BIOS) ROM
Address Range Size Description
0x00000–0x003FF 1 KB Interrupt Vector Table (IVT)
0x00400–0x004FF 256 B BIOS Data Area (BDA)
0x00500–0x9FBFF ~639 [KB](/page/KB) Conventional Memory (DOS kernel, [COMMAND.COM](/page/COMMAND.COM), drivers, applications, TSRs; exact free space varies)
0x9FC00–0x9FFFF ~1 KB Extended BIOS Data Area (EBDA, if present)
0xA0000–0xBFFFF 128 KB Video Memory (text/graphics buffers)
0xC0000–0xC7FFF 32 KB Video [BIOS](/page/BIOS) ROM
0xC8000–0xDFFFF 96 KB [Expansion Card](/page/Expansion_card) ROMs/Adapter [Firmware](/page/Firmware) (optional)
0xE0000–0xEFFFF 64 KB [Expansion Card](/page/Expansion_card) ROMs/Adapter [Firmware](/page/Firmware) (optional)
0xF0000–0xFFFFF 64 KB System [BIOS](/page/BIOS) ROM
This map represents a standard configuration on an IBM PC or compatible; actual contents could vary with hardware expansions or BIOS versions.[10][12][1]
Causes of the 640 KB Barrier
The 640 KB barrier in conventional memory stemmed primarily from hardware constraints imposed by the Intel 8088 microprocessor used in the original IBM PC. The 8088 featured a 20-bit address bus, enabling it to address up to 1 MB (2^20 bytes) of total memory in real mode, but this space had to be shared among RAM, peripherals, and system firmware.[13]
IBM's architecture further subdivided this 1 MB address space, reserving significant portions above 640 KB for essential hardware functions, which fixed the limit for user-accessible RAM. Specifically, addresses from 0xA0000 to 0xBFFFF (128 KB) were allocated to video memory for monochrome and color/graphics adapters, while 0xF0000 to 0xFFFFF (64 KB) housed the BIOS ROM containing system initialization and I/O routines. Additional areas, such as 0xC0000 to 0xEFFFF (192 KB), were set aside for memory-mapped I/O expansion and optional ROMs on adapter cards, ensuring compatibility with fixed peripherals without interfering with user programs. This design choice in the 1981 IBM PC technical specifications balanced expandability with hardware stability, preventing the operating system from directly accessing upper regions to avoid conflicts with device mappings.[1]
Software compatibility reinforced the barrier, as MS-DOS was engineered to load its kernel into low memory starting just after the interrupt vector table and BIOS data area (typically around 0x0600), making it directly accessible to applications in real mode. Early DOS applications and device drivers were developed assuming this layout, with programs loading into the remaining space up to 0xA0000 (640 KB total), as exceeding this would overlap with reserved hardware areas and cause system instability. This expectation became standardized across IBM-compatible PCs, locking conventional memory at 640 KB to maintain backward compatibility.[14]
By the late 1980s, the limitation had become notorious as a "640K barrier," often attributed to a quote from Bill Gates claiming "640K ought to be enough for anybody," though Gates has repeatedly denied saying it, and no primary evidence supports the attribution. The barrier highlighted growing software demands outpacing hardware design, prompting workarounds like upper memory utilization, but it underscored the original architecture's constraints on expandability.[15][16]
Upper Memory Area Utilization
Structure of Upper Memory Blocks
The Upper Memory Area (UMA), spanning addresses 0xA0000 to 0xFFFFF (640 KB to 1 MB), is fragmented into hardware-reserved regions that create potential gaps for Upper Memory Blocks (UMBs). The video memory region occupies 0xA0000 to 0xBFFFF (128 KB), dedicated to display adapter RAM for modes like those on VGA cards.[12] Immediately following is the adapter space from 0xC0000 to 0xDFFFF (128 KB), which includes video BIOS ROM (typically 0xC0000 to 0xC7FFF, 32 KB) and slots for option ROMs from expansion cards, such as network or SCSI adapters; unused portions here form key gaps if no hardware claims them.[12] The system ROM area covers 0xE0000 to 0xFFFFF (128 KB), with motherboard BIOS in 0xF0000 to 0xFFFFF (64 KB) and extension ROMs in the lower part, further delineating unused regions based on BIOS implementation.[12]
These gaps vary significantly with hardware configurations, as installed adapters influence reservation sizes. For instance, EGA or VGA cards may utilize more of the video memory range or extend ROM usage into adapter space, shrinking available free areas compared to simpler CGA setups.[17] In a typical IBM PC-compatible system without extensive peripherals, free UMBs aggregate 128 to 192 KB across multiple non-contiguous blocks, though actual usable space often falls lower due to fragmentation and shadowing.[18]
Detection and mapping of UMBs require specialized drivers starting with MS-DOS 5.0. HIMEM.SYS establishes extended memory (XMS) access, allowing EMM386.EXE to probe the UMA for free regions by checking address availability and compatibility, often using enhanced scans like the HIGHSCAN option for precise identification.[19] While EMM386 emulates the Expanded Memory Specification (EMS) interface via INT 67h for related operations, UMB management primarily leverages DOS allocation functions once mapped.[20]
UMBs face inherent limitations as non-contiguous allocations, capping usable sizes to individual gaps (e.g., 32-64 KB per block), and remain accessible only in real mode without drivers, invisible to standard DOS programs otherwise.[19] This structure ties directly to the overall DOS memory map's 640 KB conventional limit, where UMB relocation helps mitigate base memory constraints.[12]
Accessing and Configuring UMBs
To enable upper memory blocks (UMBs) in MS-DOS, the system first requires access to extended memory, which is managed by loading the HIMEM.SYS device driver in the CONFIG.SYS file; this driver, introduced in MS-DOS 5.0, provides access to memory above 1 MB on systems with an 80286 or higher CPU, including the high memory area (HMA) just above 1 MB.[4][21] For actual UMB creation on 80386 or higher processors, the EMM386.EXE driver (available starting with MS-DOS 5.0) must also be loaded in CONFIG.SYS, as it emulates expanded memory by remapping portions of extended memory into the upper memory area between 640 KB and 1 MB.[4][21]
Once UMBs are enabled, configuration involves linking them to the DOS environment and directing device drivers or terminate-and-stay-resident (TSR) programs to load into them. The DOS=UMB directive in CONFIG.SYS attaches the UMBs to the DOS data segment, allowing core DOS components to utilize upper memory and freeing conventional memory below 640 KB.[4] Similarly, the DEVICEHIGH= command loads specified device drivers into available UMBs rather than conventional memory, provided it follows the EMM386.EXE line in CONFIG.SYS; this must be used judiciously to avoid fragmentation.[4][22]
MS-DOS 6.0 and later include the MEMMAKER utility, which automates UMB configuration by analyzing the system's CONFIG.SYS and AUTOEXEC.BAT files, testing load orders, and relocating drivers and TSRs to upper memory for optimal conventional memory usage.[4] Third-party tools like Quarterdeck's QRAM further optimize UMB allocation on 8086, 80286, and compatible systems by scanning for relocatable components and providing advanced loading options, often achieving higher efficiency than built-in utilities on certain hardware.[23]
UMB access and configuration require at minimum an 80286 CPU for basic extended memory support via HIMEM.SYS, but full UMB functionality with EMM386.EXE demands an 80386 or 80486 processor due to its reliance on protected mode switching.[21] Compatibility issues can arise with certain hardware, such as SCSI host adapters that reserve specific regions in the upper memory area (e.g., for ROM or I/O buffers), rendering those blocks unusable for UMBs and potentially causing allocation failures unless manually excluded via EMM386.EXE parameters.[24]
Software Management Techniques
Role of Device Drivers and TSRs
Device drivers in MS-DOS are loaded during system initialization through directives in the CONFIG.SYS file, where they occupy space in conventional memory as permanent residents to manage hardware interactions.[25] For instance, ANSI.SYS, a common device driver that enables enhanced console functions such as screen control via ANSI escape sequences, typically consumes around 9-10 KB of conventional memory upon loading.[26] Other device drivers, such as those for keyboards or displays, similarly range from 5 to 20 KB each, depending on their functionality and version, contributing to the overall allocation in the first 640 KB of addressable RAM.[27]
Terminate-and-stay-resident (TSR) programs, invoked via the AUTOEXEC.BAT file or command line, execute briefly before hooking into system interrupts to remain active in memory for ongoing services like input handling or caching.[18] Examples include MOUSE.COM, a TSR for Microsoft mouse support that uses approximately 9 KB of conventional memory, and SMARTDRV.EXE, a disk caching utility that requires about 2 KB in conventional memory while primarily utilizing extended memory for its buffers.[26][28] KEYB.COM, another TSR for configuring international keyboards, occupies roughly 15 KB.[29]
The cumulative effect of multiple device drivers and TSRs in a typical configuration—such as a chain in AUTOEXEC.BAT loading MOUSE.COM, SMARTDRV, and KEYB.COM—can consume 100-200 KB or more, often leaving less than 400 KB of free conventional memory available for applications after boot.[30] This overhead not only reduces usable space within the 640 KB conventional memory limit but also leads to fragmentation, as TSRs allocate blocks that may not be contiguous, complicating subsequent program loading.[18] Loading larger TSRs before smaller ones helps mitigate fragmentation by preserving larger free blocks.[18]
Strategies for Loading High
To relocate device drivers and terminate-and-stay-resident (TSR) programs from the first megabyte of RAM into upper memory blocks (UMBs), MS-DOS provides specific commands that attempt to load these components high, provided UMBs are enabled via prior configuration such as HIMEM.SYS and EMM386.EXE with the DOS=HIGH,UMB directive.[31]
In the CONFIG.SYS file, the DEVICEHIGH= command loads device drivers into available UMBs; for instance, DEVICEHIGH=C:\DOS\SMARTDRV.SYS places the disk cache driver high instead of in conventional memory below 640 KB. Similarly, in the AUTOEXEC.BAT file, the LH (load high) alias for LOADHIGH attempts to place TSRs such as DOSKEY or mouse drivers into UMBs, as in LH C:\DOS\MOUSE.COM. These commands support a range of standard MS-DOS drivers like ANSI.SYS, RAMDRIVE.SYS, and EGA.SYS, as well as TSRs including NLSFUNC.EXE, GRAPHICS.COM, and SHARE.EXE.[31]
The allocation process begins with the DOS linker scanning available UMBs for a suitable contiguous block that fits the program's size; it selects the largest remaining UMB even if a smaller one would suffice, which can lead to fragmentation if not managed carefully. If no adequate UMB space is found, the program falls back to conventional memory, ensuring system stability but forgoing the memory relocation benefit. Program sizes can be assessed using MEM /C while the component is running or by file size for static drivers.[32][31]
Best practices emphasize optimizing load order to minimize wasted space in UMBs, as MS-DOS's first-fit-into-largest-block strategy may leave gaps; for example, with UMBs of 4 KB and 3 KB, loading programs of 2 KB, 3 KB, and 2 KB in that sequence (smaller first in this case) fills both blocks fully, whereas starting with the 3 KB program wastes 1 KB in the 4 KB block. Generally, loading larger programs early works well when UMB fragmentation is low, but manual adjustment or tools like MemMaker can automate optimal placement using switches such as /L (specify link strategy) and /S (specify UMB segment) with LOADHIGH.[32]
By successfully relocating drivers and TSRs high, these strategies free up substantial conventional memory for applications, often reclaiming dozens of kilobytes per component; for instance, moving SMARTDRV.SYS high preserves its footprint—typically around 20-30 KB—entirely in the upper area, contributing to overall gains of up to several hundred kilobytes depending on the system load. This approach maximizes the 640 KB conventional limit for DOS programs without requiring hardware changes.[31][32]
Optimization and Expansion Methods
Driver and TSR Size Reduction
One primary method for reducing the memory footprint of device drivers and terminate-and-stay-resident (TSR) programs in MS-DOS involved editing the CONFIG.SYS file to exclude non-essential drivers, thereby preventing their loading into conventional memory. For instance, users could comment out or remove lines for drivers supporting unused peripherals, such as printer or network interfaces, which often consumed several kilobytes each. This approach, recommended in early optimization guides, allowed for selective loading based on immediate needs, freeing up to 20-50 KB depending on the configuration.[33]
To further minimize sizes, developers and users employed built-in or minimal third-party drivers over feature-rich alternatives; for example, MS-DOS's native drivers for basic devices like keyboards were smaller than third-party enhancements, reducing overhead by avoiding extraneous code for advanced features. Conditional compilation during driver development, using directives like #ifdef to exclude unused interrupt handlers or DOS calls, also trimmed resident portions significantly, as detailed in programming references from the era. Additionally, post-loading adjustments, such as redirecting initialization output to NUL (e.g., freeup > nul), eliminated temporary memory allocations during startup.[33]
Compression techniques focused on code efficiency and data packing within TSRs. Inline assembly in compilers like Microsoft C 6.0 or Turbo C produced compact drivers, such as a 600-byte assembly version of LASTDRV compared to a 5,000-byte C equivalent, by replacing high-level calls with direct opcodes. TSRs could swap transient code to disk or high memory after residency, shrinking the conventional allocation; tools like those in 4DOS reduced the shell's footprint to 256 bytes on 286+ systems via environment space release using functions like _dos_setblock(). For shared resources, MS-DOS 6's SHARE.EXE supported options like /L:100 to limit lock records, optimizing its ~4 KB usage without full default settings. Stripping overlays from TSR executables via utilities or manual editing further compacted files before loading.[33]
Analysis began with the MEM command's /C option, which listed loaded programs, their sizes in paragraphs, and allocation details, enabling identification of large residents like a 22 KB mouse driver at segment OBEAh. Users could then replace such drivers—for example, swapping a full-featured mouse handler (e.g., 27 KB) with a lightweight alternative under 10 KB—to reclaim space. Historical utilities from the 1980s and 1990s, such as INTRSPY for interrupt and memory chain auditing or DEBUG for inspecting memory control blocks (MCBs), facilitated deeper trimming by revealing redundant code or unused heaps. Memory Commander, a commercial tool, provided graphical auditing to detect and relocate oversized TSRs, often recovering 10-30 KB through automated suggestions. These methods complemented relocation strategies like loading high but prioritized inherent size reduction for sustained gains.[33][34]
DOS Extenders for Extended Access
DOS extenders are specialized software programs designed to enable MS-DOS applications to operate in protected mode on Intel 80286 and later processors, thereby bypassing the 1 MB address space limitation of real-mode DOS and accessing up to 16 MB or more of extended memory while preserving compatibility with the host operating system. Prominent examples include Phar Lap Software's 386|DOS-Extender, introduced as the first commercial MS-DOS extender for 32-bit applications, and Rational Systems' DOS/4GW, a widely adopted 32-bit extender that supported linear addressing of up to 4 GB of memory. These tools were essential for running resource-intensive programs that exceeded conventional memory constraints, such as those requiring large code segments or data buffers.
The mechanism of DOS extenders involves initializing under real-mode DOS, typically relying on the HIMEM.SYS device driver to manage extended memory through the Extended Memory Specification (XMS), which facilitates block transfers between conventional and extended memory regions above 1 MB. Once loaded, the extender switches the CPU to protected mode, mapping extended memory into a linear address space accessible by the application and handling mode switches back to real mode for DOS service calls via interrupts. This process was standardized by the DOS Protected Mode Interface (DPMI), developed by Microsoft in 1989 with contributions from Lotus and Rational Systems, and finalized in version 1.0 on March 12, 1991, which defined a hardware-independent API using interrupt 31h for memory allocation, descriptor management, and exception handling, enabling 32-bit protected-mode code to coexist with 16-bit DOS environments. For instance, DPMI function 0501h allows allocation of extended memory blocks, while real-mode callbacks ensure seamless interaction with DOS interrupts.
DOS extenders found significant application in gaming and software development during the early 1990s. The 1993 first-person shooter Doom by id Software utilized Rational Systems' DOS/4GW to execute in protected mode, allowing it to address sufficient extended memory for its complex 3D rendering and level data without fragmenting conventional memory. Similarly, the Watcom C/C++ compiler integrated support for extenders like DOS/4GW and Phar Lap's toolkit, enabling developers to produce 32-bit DOS executables with access to extended memory via DPMI services, which was crucial for optimizing performance in applications such as scientific simulations and graphics tools.
Despite their advancements, DOS extenders had notable limitations, including the lack of true multitasking, as they typically supported only a single protected-mode application at a time within the DOS session. Errors or crashes in protected mode could lead to corruption of the underlying DOS memory structures, such as the memory control block (MCB) chain, potentially destabilizing the system upon return to real mode. Their prominence waned by 1995 with the release of Windows 95, which incorporated a built-in DPMI host and protected-mode environment, rendering standalone extenders obsolete for most new development.