EMD E9
The EMD E9 is a cab-equipped, streamlined passenger diesel-electric locomotive produced by the Electro-Motive Division (EMD) of General Motors, featuring a classic "bulldog nose" front end and powered by two 12-cylinder 567C prime movers that deliver a combined output of 2,400 horsepower.[1] Introduced in April 1954 as an evolution of the earlier E8 model, the E9 was designed primarily for high-speed passenger service, with A1A-A1A wheel arrangements on its six-axle trucks to provide smooth operation and reduced wear on high-speed runs.[2] A total of 100 A-units (with cabs) and 44 B-units (cabless boosters) were manufactured between May 1954 and December 1963, making it the final entry in EMD's storied E-series of passenger locomotives.[3] The E9's development addressed the need for greater power and reliability in the post-World War II era of expanding passenger rail networks, incorporating upgraded engines over the E8's 567B variants for improved performance and efficiency.[4] Key specifications include a length of 70 feet 3 inches for A-units, a weight of approximately 315,000 pounds, and a top speed capability of up to 117 miles per hour depending on gearing, with starting tractive effort rated at 56,500 pounds.[2] These locomotives were acquired by ten railroads, including major operators like Union Pacific, Santa Fe, and Southern Pacific, often in matching sets to haul iconic streamliner trains such as the Union Pacific's City of Los Angeles and the Santa Fe's Super Chief. Despite their technical advancements, E9 production was limited by the declining popularity of passenger rail travel in the United States during the 1950s and 1960s, as automobiles and airlines drew riders away from trains.[5] Many E9s remained in service into the 1970s under Amtrak and were later repurposed for freight or excursion duties; notably, Union Pacific restored three E9s (Nos. 949, 951, and 963B) in the 1980s for heritage operations, preserving them as operational examples of mid-20th-century railroading.[6] Today, a handful of E9s survive in museums and private collections, symbolizing the peak of diesel passenger power before the transition to more modern designs.[1]Development and Production
Background and Evolution
The EMD E9 represented the culmination of the E-unit series, serving as the last model in the EMD E-unit series of passenger diesel locomotives produced by the Electro-Motive Division (EMD) of General Motors, with manufacturing spanning from April 1954 to January 1964.[1] As the direct successor to the E8, the E9 was designed to refine and extend the capabilities of earlier E-series models amid the rapid dieselization of American railroads following World War II.[6] This evolution addressed the growing demand for reliable, high-speed motive power to haul streamlined passenger trains, competing with emerging automotive and air travel options in the 1950s.[7] Building on the E7 and E8, the E9 incorporated an upgraded powerplant consisting of two 12-cylinder 567C prime movers, boosting total output from the prior models' 2,250 horsepower to 2,400 horsepower for improved acceleration and sustained performance on long-distance routes.[2] External modifications were subtle but notable, including a revised headlight housing with flush-mounted glass instead of the recessed design on the E8, and the optional inclusion of the Mars oscillating signal light, which had been common on earlier units.[4] These changes enhanced aerodynamics and simplified maintenance without altering the iconic bulldog-nose aesthetic suited to passenger service.[1] In comparison to the E8, the E9 featured refined engine tuning for greater efficiency, expanded main generator capacity to handle the increased power, and optimizations in fuel consumption that extended operational range—critical for the era's extensive cross-country passenger networks.[2] The first production units rolled out in April 1954 for the Illinois Central Railroad, followed closely by the initial order for the Union Pacific later that year, marking the start of widespread adoption.[1] Overall, 100 cab-equipped A-units and 44 cabless B-units were built exclusively for U.S. railroads, reflecting the model's focused role in premium passenger operations before the shift toward more versatile FP-series locomotives.[2]Manufacturing Details
The EMD E9 locomotives were produced at General Motors' Electro-Motive Division (EMD) plant in La Grange, Illinois, from April 1954 through January 1964.[1] This timeline reflected the final phase of EMD's passenger cab unit production, as demand for such locomotives declined amid falling passenger rail ridership in the post-World War II era. A total of 100 cab-equipped A-units (E9A) and 44 cabless booster B-units (E9B) were built, comprising the entirety of the model with no major sub-variants beyond this A/B distinction. EMD's manufacturing process emphasized streamlined assembly, leveraging vertically integrated facilities that machined, fabricated, and welded standardized components such as the 567C prime movers and electrical systems shared across the "9 Line" models.[8] The approximate cost per unit reached $260,000 in mid-1950s dollars, based on a 1955 Union Pacific order for 16 units totaling $4,159,000.[9] During late production, adaptations included dynamic braking as a common option on units destined for challenging grades, featuring a distinctive 48-inch fan for cooling the resistor grids.[10] The final E9s, including Union Pacific E9A No. 914, were completed and delivered in January 1964, signifying the close of EMD's passenger E-unit series.[3]Design and Specifications
Engine and Powertrain
The EMD E9 diesel locomotive is equipped with two 12-cylinder 567C two-stroke diesel engines, each rated at 1,200 horsepower at 800 rpm, providing a combined output of 2,400 horsepower.[1] Each engine features a bore of 8.5 inches and a stroke of 10 inches, with two gear-driven Roots-type blowers supplying supercharging and scavenging air to the cylinders via air boxes.[11] The 567C design incorporated enhancements over the preceding 567B variant used in the E8, including an improved water manifold system in the air box to reduce coolant leaks and better piston configurations for enhanced reliability and oil control.[12] Power from the engines is transmitted electrically through two main generators, one per engine, designated as type D27 by General Motors, which convert mechanical energy into DC current. This current powers four D37 traction motors—two per truck—arranged in an A1A-A1A configuration, enabling efficient propulsion across the locomotive's four powered axles while the center axle on each truck remains unpowered for reduced weight and improved ride quality.[1][4] The system supports dynamic braking via resistor grids, which dissipate excess energy as heat to aid in speed control and reduce wear on mechanical brakes.[11] The fuel system includes 1,200-gallon tanks, with motor-driven gear pumps delivering diesel through dual filters to the engines; excess fuel recirculates for injector cooling.[11] Cooling is managed by gear-driven centrifugal water pumps circulating fluid through radiators, assisted by three axial fans per engine group that activate thermostatic control above 170°F to maintain optimal temperatures.[11] Engine starting relies on a 64-volt battery system that cranks the main generator, temporarily converting it into a starting motor, with provisions for air-start capabilities in some configurations.[11]Structure and Performance
The EMD E9 featured a streamlined carbody measuring 70 feet 3 inches in length and 10 feet 7.5 inches in width, constructed with a steel frame sheathed in stainless steel for durability and corrosion resistance.[2][1] The A-unit included a cab with a centered headlight placement, contributing to its iconic "bulldog nose" profile, while the B-unit lacked a cab and was slightly shorter at 70 feet overall.[1][13] The locomotive rode on two Blomberg three-axle A1A trucks, each with a 9-foot-4-inch wheelbase, 36-inch wheels, and roller bearings to support high-speed passenger operations.[1][13] These trucks provided stability with the middle axle unpowered as an idler, distributing the unit's weight effectively across routes demanding sustained velocities.[13] Performance capabilities emphasized passenger service, with a top speed of 117 mph achievable using a 52:25 gear ratio, though many units operated at 85 mph with the standard 57:20 ratio.[1] Starting tractive effort reached 56,500 lbf at 25% adhesion, while continuous tractive effort was rated at 31,000 lbf at 11 mph; the A-unit weighed 315,000 pounds, and the B-unit 290,000 pounds, optimizing adhesion for acceleration out of stations.[2][1] The underframe was engineered for durability at speeds exceeding 100 mph, with the bulbous nose design minimizing aerodynamic drag on long-haul routes.[1][13] Safety and comfort provisions included a Vapor-Clarkson steam generator producing 1,200 pounds per hour for passenger car heating, essential for cold-weather operations.[1][2] Later production units incorporated cab air conditioning for crew comfort during extended runs, and all supported multiple-unit (MU) control for consist operations of up to five or more units.[3][4] Dynamic braking was standard on A-units to enhance control on descending grades.[2]Operational History
Original Owners and Deployment
The EMD E9 locomotives were acquired by 9 U.S. railroads between 1954 and early 1964, with a total production of 100 A-units and 44 B-units dedicated to high-speed passenger service. Orders varied in size, from single units to the largest fleet purchased by the Union Pacific Railroad, which ordered 35 A-units (numbered 943–962 and 900–914) and 34 B-units (numbered in the 900B–974B series) specifically to power its fleet of named "City" streamliners.[4] Other notable buyers included the Chicago, Burlington & Quincy Railroad with 16 A-units (9980A–9995A) for Midwest passenger routes, the Atchison, Topeka and Santa Fe with 8 A-units for the Super Chief, the Milwaukee Road with 18 A-units and 6 B-units for Hiawatha service, and the Southern Pacific Railroad with 9 A-units (6051–6059) for coastal and mail services.[1] Smaller orders went to railroads such as the Illinois Central (10 A-units and 4 B-units for City of New Orleans trains) and the Florida East Coast (5 A-units).[1] Deployment emphasized premium long-distance passenger trains, where E9s excelled in multi-unit consists due to their 2,400 horsepower output and streamlined design suited for speeds up to 100 mph on electrified mainlines.[1] The Union Pacific integrated its E9s into A-B-A or A-B-B-A configurations for trains like the City of Los Angeles, hauling consists of up to 16 cars across Western routes from Chicago to Los Angeles.[4] Similarly, the Chicago, Burlington & Quincy deployed its units on the Denver Zephyr and California Zephyr, often paired with mail and express cars to support postal contracts on Midwest corridors.[14] First units entered revenue service in April 1954 with the Illinois Central on routes from Chicago to New Orleans, marking the E9's debut in operational fleets across the Midwest and West.[1] Owners customized E9s to align with corporate identities and operational needs, enhancing reliability in daily service. Union Pacific painted its units in a distinctive yellow-and-gray scheme with polished aluminum accents on the nose and skirting, while adding snow shields to A-units between 1955 and 1959 to mitigate intake issues in harsh weather.[4] The Southern Pacific applied its red-and-orange "Daylight" livery to its A-units for visibility on coastal runs, and some fleets, including the Chicago, Burlington & Quincy, later removed dynamic braking grids or adjusted skirting for easier trackside maintenance without compromising initial aerodynamics.[15] These adaptations allowed E9s to handle both passenger and ancillary mail/express duties efficiently during their early years.Later Service and Retirement
Following the formation of Amtrak in 1971, the national passenger carrier acquired a total of 57 E9 units from various private railroads, including 23 cab-equipped A-units and 18 booster B-units from the Union Pacific alone, integrating them into service on long-distance routes such as the California Zephyr and Coast Starlight.[4][1] These locomotives continued to haul passenger trains through the mid-1970s, but their role diminished as Amtrak prioritized more efficient all-electric F-series units for better traction and compatibility with newer Amfleet passenger cars that required head-end power (HEP) rather than the E9's steam generators.[1] In secondary roles during the 1960s and 1970s, several E9s were repurposed for freight and mail services by original owners; for instance, Union Pacific assigned units to short-haul freight runs between Portland and Hinkle, Oregon, as late as September 1971, while others supported mail trains on routes like the Chicago & North Western.[4] Amtrak further adapted some E9 B-units by removing steam generators and converting them to HEP cars to provide electrical supply for modern rolling stock, extending their utility on mixed passenger operations until the late 1970s.[3] High maintenance costs associated with the aging two 12-cylinder 567C prime movers, which demanded frequent overhauls due to wear from decades of service, accelerated their decline, compounded by the overall shift away from steam-heated passenger consists.[1] Notable events in the E9's later years included Union Pacific's retention of select units for excursion service, such as the 1974 Preamble Express special, where they provided protection power alongside steam locomotives.[4] Rebuild efforts by Morrison-Knudsen extended the life of some units; for example, Burlington Northern sent 16 E9 A-units for overhaul in 1973, receiving upgraded 12-cylinder 645-series engines and HEP capabilities for Chicago-area commuter runs.[16] The bulk of the E9 fleet was withdrawn between 1971 and 1980, with Amtrak retiring its remaining units by that year and selling the final group of 48 to Precision National Corporation in June 1980; stragglers persisted in revenue service into the mid-1990s on private and tourist lines, marking the end of their operational era.[4]Preservation and Legacy
Surviving Examples
As of 2020, preservation records indicate that 27 EMD E9 locomotives (both A and B units) remain extant, down from 42 documented in 1997, with the majority maintained as static displays at museums and rail sites across the United States.[17] These survivors represent a mix of original configurations and some rebuilt for head-end power generation during their later service lives. No significant losses have been reported since 2020, though ongoing challenges with sourcing parts for the 16-567C prime movers limit full mechanical operations to a select few units.[1] Over 20 E9 units are preserved statically, often cosmetically restored to reflect their original paint schemes and serving as educational exhibits. Notable examples include Southern Pacific 6051 at the California State Railroad Museum in Sacramento, California, which retains its iconic "Daylight" orange and red livery; Milwaukee Road 38A at the National Railroad Museum in Green Bay, Wisconsin; and Union Pacific 951 and 963B, stored as part of the Union Pacific Heritage Collection in Omaha, Nebraska.[18][17] Chicago, Burlington & Quincy 9990 is displayed outdoors in Keller, Texas, while New York Central 4096 (later Union Pacific 912A) resides at the Danbury Railway Museum in Danbury, Connecticut.[17] Approximately 5 to 7 E9 units remain operational or semi-operational for excursion and charter service, primarily on tourist railroads. Union Pacific 949 leads this group, assigned to the UP Heritage Fleet for occasional pulls on the railroad's executive and special event trains, often in restored armor yellow and gray scheme, though currently under maintenance at Silvis, Illinois.[6][1] At the Illinois Railway Museum in Union, Illinois, Chicago, Burlington & Quincy 9989A (ex-Burlington Northern 3) is operational following restorations.[17] Milwaukee Road 33C is under restoration, with rewiring ongoing as of March 2025 to address deteriorated insulation.[19][20] Wisconsin & Southern Railroad's sister unit 102 (an E9B, ex-Union Pacific 967B) was returned to the Illinois Railway Museum around 2025.[21]| Unit | Original Owner & Number | Current Location/Owner | Status | Notes |
|---|---|---|---|---|
| E9A | Union Pacific 949 | UP Heritage Collection, Omaha, NE (maintenance at Silvis, IL) | Operational (excursions) | Used on executive trains; restored to 1955 scheme.[6] |
| E9A | Chicago, Burlington & Quincy 9989A | Illinois Railway Museum, Union, IL | Operational | Ex-BN 3; cosmetically restored.[17] |
| E9A | Milwaukee Road 33C | Illinois Railway Museum, Union, IL | Under restoration | Rewiring ongoing as of March 2025; paired with 37A for display/runs.[19] |
| E9A | Southern Pacific 6051 | California State Railroad Museum, Sacramento, CA | Semi-operational (occasional excursions) | Last surviving SP E9; "Daylight" livery.[18] |
| E9B (rebuilt) | Chicago, Burlington & Quincy 9988B | Gold Coast Railroad Museum, Miami, FL | Operational | Renumbered BN/Metra 9913; returned to service December 2024.[22][23] |
| E9A | Milwaukee Road 202A | Webb Asset Management (WAMX), Jacksonville, FL | Stored (unknown operational status) | Ex-WSOR 101; previously used for charters.[24] |
| E9B | Union Pacific 967B | Illinois Railway Museum, Union, IL | Operational | Ex-Michigan Northern 671; excursion capable; returned from WSOR ~2025.[17][21] |