EMD GP38-2
The EMD GP38-2 is a four-axle, B-B truck, diesel-electric road-switcher locomotive model manufactured by the Electro-Motive Division (EMD) of General Motors, featuring a 16-cylinder, two-stroke, 645E prime mover engine that produces 2,000 horsepower at 900 RPM for traction.[1][2] It measures 59 feet 2 inches in length over couplers, weighs approximately 250,000 pounds when loaded, and is equipped with 40-inch diameter wheels on Blomberg-M trucks, enabling a top speed of up to 65 mph depending on gearing.[1][2] Introduced as part of EMD's "Dash 2" series with upgraded electrical systems, improved cooling, and enhanced reliability over the earlier GP38, the model was designed primarily for general freight hauling, yard switching, and secondary line service on North American railroads.[2] Production of the GP38-2 began in January 1972 and continued until 1986, with a total of 2,213 units constructed at EMD's LaGrange, Illinois facility, making it one of the most prolifically built four-axle locomotives in the series.[2][1] The locomotive's non-turbocharged engine provided reliable performance with starting tractive effort of 61,000 pounds and continuous tractive effort of 54,700 pounds at 11.1 mph, supported by a 1,700-gallon fuel capacity for extended operations.[1][2] Notable for its modular Dash 2 improvements, including better vibration isolation and a more efficient AR10 alternator-D77 traction motor combination, the GP38-2 saw widespread adoption by Class I railroads like the Southern Railway, which ordered 257 units, as well as numerous regional and shortline carriers.[2][3] A variant, the GP38AC, incorporated alternating current (AC) traction motors for higher starting tractive effort but was produced in smaller numbers (261 units) from 1970 to 1971 before the DC-based GP38-2 became the standard.[2] Many GP38-2s remain in service today, often rebuilt or upgraded for emissions compliance and remote control operations, underscoring their durability and versatility in modern railroading.[2]Development and Background
Origins and Predecessors
The EMD GP series of locomotives, introduced in the late 1940s, evolved significantly during the 1960s as railroads sought versatile road-switchers capable of handling both freight hauling and yard duties. Building on the success of earlier models like the GP30, which utilized the 16-cylinder 567D3 engine for 2,250 horsepower, EMD responded to demands for higher output by developing the GP35 in 1963. This four-axle locomotive featured an upgraded 16-567D3A prime mover rated at 2,500 horsepower, marking a step toward greater power density while maintaining the general-purpose design for secondary lines and switching. Produced from July 1963 to December 1965, the GP35 achieved strong sales with over 1,300 units built for North American railroads, establishing it as a high-horsepower benchmark in EMD's lineup before the transition to the next generation of engines.[4][5] The GP38, introduced in January 1966, represented a deliberate detuning of the GP35's power to prioritize reliability and cost efficiency for lighter-duty applications. Powered by a non-turbocharged 16-cylinder 645E3 diesel engine producing 2,000 horsepower, it replaced the aging 567 series with EMD's new 645-series prime mover, which offered improved durability through a larger bore and uniflow scavenging. Built until December 1971, a total of 706 GP38 units were produced, finding buyers among Class I railroads like the Southern Railway and Penn Central for general freight service.[2][6][7] By the early 1970s, U.S. railroads faced severe economic pressures, including inflation, fuel shortages, and widespread bankruptcies that reduced capital for new equipment purchases. Operators increasingly demanded affordable, low-maintenance road-switchers that could deliver consistent performance without the high operational costs of turbocharged high-horsepower models, amid a shrinking network and regulatory constraints on pricing. This market shift emphasized locomotives suited for branch lines and yard work, where fuel efficiency and ease of servicing outweighed raw power.[8] In response, EMD launched its "Dash 2" initiative in 1972, a comprehensive upgrade program aimed at enhancing overall locomotive reliability through standardized, modular components that simplified repairs and reduced downtime. Key advancements included a redesigned electrical control cabinet with plug-in modules for quick replacement and shared parts across models, addressing the fragmented systems of prior designs like the GP38. Additional improvements encompassed better prime mover components, such as reinforced cylinder heads and enhanced cooling, to mitigate known issues in the 645 series. This evolutionary step directly influenced the development of the GP38-2, building on the GP38's foundation to meet the era's economic realities.[9]Design Improvements and Introduction
The EMD GP38-2 was introduced in January 1972 as the first production model in Electro-Motive Division's (EMD) Dash 2 series of locomotives, marking a significant evolution in road-switcher design. Production ran from that month until 1986, with a total of 2,213 units built. This model addressed reliability concerns from prior generations through targeted engineering enhancements while maintaining compatibility with existing rail infrastructure. Central to the Dash 2 upgrades was an improved governor system, which provided better engine response and overall reliability by refining fuel control and speed regulation under varying loads. Electrical systems were revolutionized with modular components, including the AR10 alternator replacing the older D32 generator, enabling quicker maintenance through unit-level replacements and reducing downtime. Cooling systems were also enhanced with a more compact radiator design and optimized fan spacing, which helped mitigate overheating and component failures in demanding service conditions. The GP38-2 retained the 2,000 horsepower output from its 16-cylinder 645E3 engine, ensuring versatility for both general freight hauling and yard switching duties. Positioned as a mid-range workhorse, it bridged the gap between higher-powered siblings like the 3,000 hp GP40-2 and lower-output models such as the GP30, appealing to railroads seeking balanced performance without excessive fuel consumption. EMD conducted rigorous initial testing and certification for the GP38-2 to validate the Dash 2 modifications before full-scale production. The first customer unit, Southern Railway #5000, rolled out in January 1972, confirming the model's readiness for revenue service.Technical Specifications
Engine and Powertrain
The EMD GP38-2 locomotive employs the EMD 16-645E as its prime mover, a supercharged (Roots blower), two-stroke, 45-degree V16 diesel engine designed for reliable road-switcher service.[10] This engine features a total displacement of 10,320 cubic inches (169 liters), achieved through a bore of 9.06 inches (230 mm) and a stroke of 10 inches (254 mm) per cylinder.[10] Rated at 2,000 horsepower (1,490 kW), the 645E delivers peak output at 900 RPM, providing efficient power for freight hauling while maintaining lower operating speeds compared to higher-rated variants.[1] At full load (notch 8), fuel consumption typically ranges from 120 to 125 gallons per hour, reflecting the engine's specific fuel rate of approximately 0.40 pounds per horsepower-hour.[11] Power from the prime mover drives the AR10-D14 main alternator, a three-phase AC generator that converts mechanical energy into electrical power for propulsion.[12] This alternator supplies rectified DC current to four D77 series traction motors—one per axle—enabling the B-B (four-axle) configuration to achieve starting tractive effort of 61,000 pounds.[13] With a standard 62:15 gear ratio and 40-inch wheels, the powertrain supports a maximum speed of 65 mph (105 km/h), suitable for yard, local, and drag freight operations. The locomotive's underframe incorporates EMD Blomberg-M trucks, which provide stability and distribute the 125-ton operating weight across the four axles in a B-B truck arrangement.[1] Dynamic braking is integrated into the system, allowing the traction motors to function as generators during deceleration; the resulting electrical energy is dissipated as heat through resistor grids, with the main alternator facilitating control for enhanced slowing capability on grades.[12]Electrical and Control Systems
The electrical architecture of the EMD GP38-2 features the AR10 main alternator as its core component, generating three-phase alternating current that is rectified to direct current for powering the four D77 traction motors. This setup provides a nominal 600-volt DC output with blower ventilation, marking a significant advancement over the DC generators in the predecessor GP38 model by offering superior voltage regulation and efficiency in power conversion.[1][14] The AR10's design integrates seamlessly with the 16-645E engine, ensuring reliable power delivery for freight operations while minimizing electrical losses.[12] Auxiliary systems support essential onboard functions through a Delco 64-72 motor-generator set rated at approximately 72 kW, producing 74 volts DC for control circuits, battery charging, lighting, and excitation needs; later variants incorporated upgraded 82-kW sets for enhanced capacity.[15] Power contactors, rated at 1,200 amperes and 1,500 volts with flashover protection, facilitate smooth transitions between idle and load states, contributing to stable operation during acceleration and deceleration.[15] Control mechanisms emphasize precision and reliability, including a load regulator that optimizes throttle response by dynamically adjusting generator excitation to maintain consistent engine RPM and power output across notches.[16] The standard 26L air brake system integrates automatic control features, such as self-lapping independent brakes and a 26F control valve portion, for responsive train handling with 9-inch by 8-inch cylinders and a 5.65:1 leverage ratio.[1] Multiple-unit (MU) capabilities are standard, enabling synchronized control of up to several locomotives via jumper cables for distributed power in lashups, enhancing flexibility in heavy-haul assignments. As part of the Dash 2 series enhancements, the GP38-2 incorporates modular electrical control cabinets and solid-state circuit modules, allowing for rapid unit replacement during maintenance rather than individual component troubleshooting, which streamlines repairs and improves overall system dependability.[17] These upgrades, including repackaged electronics like the WS10 module for wheelslip control, reduce complexity in the control stand and high-voltage compartments compared to earlier designs.[18]Dimensions and Performance
The EMD GP38-2 locomotive features compact dimensions suited to its role as a versatile road-switcher, measuring 59 feet 2 inches in length over the pulling faces of the couplers, 10 feet 3 inches in width over the handrail supports, and 15 feet 4 inches in height from the rail to the top of the cooling fan guard.[1] These proportions allow it to navigate tight yard clearances while providing stability on mainline tracks.[12] The standard operating weight is 250,000 pounds (125 tons), though configurations could reach up to 260,000 pounds (130 tons) for service on heavier rail infrastructure to optimize adhesion.[12] Axle loading averages 62,500 pounds per axle across its four-axle B-B truck arrangement, balancing track wear with tractive performance.[19] In terms of performance, the GP38-2 delivers a starting tractive effort of 61,000 pounds and a continuous tractive effort of 54,700 pounds at a minimum speed of 11.1 miles per hour, enabling reliable operation in both hump yard switching and drag freight duties up to a top speed of 65 miles per hour.[13] Fuel capacity ranges from 1,700 gallons in the standard tank to optional expansions of 3,600 gallons, supporting extended runs without frequent refueling.[1] This design emphasizes adaptability for mixed freight and yard service, with a typical service life expectancy of 30 to 40 years under routine maintenance and overhauls.[20]Variants
Standard GP38-2
The standard GP38-2 featured a conventional narrow cab design typical of EMD's Dash 2 series locomotives, with production divided into two primary phases reflecting evolutionary updates to meet regulatory and manufacturing improvements. Phase 1 units, built from 1972 to 1974, incorporated a high-short hood configuration with louvered side panels on the cab and square wire grid radiator intakes, emphasizing durability for freight service while maintaining the familiar GP-series silhouette. These early models often included riveted cab side panels and bolted battery box covers, contributing to their robust yet straightforward appearance.[14] Phase 2 production, spanning 1975 to 1985, introduced safety cab enhancements compliant with emerging Federal Railroad Administration standards, such as improved visibility through revised window arrangements and welded cab side panels for better structural integrity. Radiator intakes were updated to a corrugated design with shortened dimensions, and battery box covers shifted to latched mechanisms, alongside Q-type fans on later sub-phases for enhanced cooling efficiency. Overall, 2,213 standard GP38-2 units were constructed at EMD's LaGrange, Illinois facility, with serial numbers ranging across orders from early examples like 72665 series to later builds up to 86-345, establishing this as the baseline model before any wide-cab or specialized variants.[2][14][21] Common options tailored the standard GP38-2 for freight-oriented railroads, including the deletion of the steam generator boiler, which was standard on earlier passenger-capable models but omitted in most builds to reduce weight and maintenance for non-passenger duties. Post-1980s Federal regulations mandating improved visibility led to the addition of ditch lights on the pilots of later units, enhancing safety during mainline operations. Identification hallmarks of the standard model include Blomberg-M trucks with single-shoe braking for reliable adhesion on varied tracks, a single-chime horn mounted on the cab roof for signaling, and EMD's iconic blue-and-yellow paint scheme applied to demonstration units to showcase the locomotive's capabilities to potential buyers.[21]GP38-2W
The GP38-2W variant was introduced in 1973 to meet Transport Canada's safety standards for improved crew protection and visibility on Canadian railroads. A total of 51 units were constructed exclusively for the Canadian National Railway (CN), featuring a distinctive wide-nose cab design.[21][2] The primary design modification was the adoption of a full-width "comfort cab" that extended approximately 5 feet forward compared to the standard narrow cab, enhancing forward visibility by up to 20 degrees and providing superior crashworthiness through reinforced structure and energy-absorbing materials.[22][23] Despite these cab alterations, the locomotive retained the core powertrain of the standard GP38-2, including the 2,000 horsepower EMD 16-645E3 diesel engine coupled to an AR10 alternator and D77 DC traction motors.[2] This configuration ensured compatibility with existing CN fleets while prioritizing operator safety in demanding freight operations. Production occurred at General Motors Diesel Division (GMD) in London, Ontario, with serial numbers A2843 for the initial unit (built June 1973) and A2888 through A2937 for the subsequent 50 units (built October 1973 to January 1974).[21] To adapt for harsh northern conditions, the GP38-2W incorporated operational enhancements such as snow shields over the number boards and horns to prevent ice buildup, along with a reinforced heavier frame for improved stability on snow-covered or uneven tracks.[22] All GP38-2W units were built in an early production configuration equivalent to Phase Ib, featuring rectangular radiator grilles and standard exhaust stacks, though later CN maintenance practices often aligned them with subsequent phase updates for consistency across the roster.[21] In contrast to the standard GP38-2's narrow cab used primarily in the U.S., the GP38-2W's modifications reflected Canada-specific regulatory emphasis on cab ergonomics and collision resistance.[2]GP38AC and Other Derivatives
The GP38AC was a variant of the earlier GP38 model, representing an early evolution in EMD's GP38 line that introduced an AR10 AC alternator—a feature later standardized in the Dash 2 GP38-2. Introduced in May 1970 as a four-axle, 2,000-horsepower diesel-electric locomotive, it replaced the standard D32 DC generator used in the base GP38, providing greater space efficiency within the carbody and improved electrical output rectification for the DC traction motors while maintaining the same 16-645 engine and Blomberg B-B trucks.[2][2] Production totaled 261 units through December 1971, with primary buyers including the Norfolk and Western (60 units, Nos. 4100-4159), Illinois Central (20 units, Nos. 9500-9519), and Louisville & Nashville (30 units, Nos. 4020-4049), among others such as the Gulf, Mobile and Ohio and St. Louis-San Francisco.[2] The design offered marginal improvements in tractive effort over the DC-generator GP38 due to better power distribution, though it saw limited adoption beyond initial orders owing to the impending Dash 2 updates.[24] While the GP38-2 standardized the AC alternator from the GP38AC as part of its Dash 2 enhancements, other derivatives of the GP38-2 focused primarily on export adaptations for international markets, particularly Mexico.[2] A total of 156 GP38-2 units were exported to Mexican railroads, primarily the Ferrocarriles Nacionales de México (NdeM), between 1972 and 1982.[25] These included high short hood (hi-nose) configurations on select batches for enhanced crew protection and visibility in forward-control operations, as well as steam generator-equipped models for passenger service on lines like the Mexico City division.[25] Examples encompass 20 units (Nos. 9200-9219) built in June 1975 with hi-nose and steam generators, 81 units (Nos. 9220-9299 and 9400) delivered in late 1975, and a final nine units (Nos. 9901-9909) in 1982 under Phase IIIa specifications.[25] Four units (Nos. 9401-9404) were assembled locally at the San Luis Potosí plant in October 1975 to support regional manufacturing.[25] These export variants highlighted the GP38-2's versatility for non-U.S. operations but remained limited in scope, comprising about 7% of total production across roughly 2,213 units worldwide.[25] The adaptations addressed specific environmental and operational demands, such as tropical climates and mixed freight-passenger duties, yet higher customization costs and niche requirements curtailed broader international uptake beyond Mexico and a single export unit to the Saudi Government Railways in 1973.[25]Production and Distribution
Manufacturing Overview
The EMD GP38-2 was primarily manufactured at the Electro-Motive Division's main assembly plant in LaGrange, Illinois, where the majority of U.S.-built locomotives in the series were produced. This facility served as the hub for EMD's diesel-electric locomotive construction throughout the mid-20th century, handling the assembly of the GP38-2's 16-cylinder 645E3 engine, electrical systems, and structural components on an integrated production line. Some units, particularly for Canadian customers and later production, were built at the General Motors Diesel Division plant in London, Ontario, with LaGrange output ending in May 1985 while London continued until July 1986.[26][13] Production of the GP38-2 commenced in January 1972 as part of EMD's Dash 2 series, which emphasized enhanced reliability through updated electrical controls, improved cooling, and modular designs for easier maintenance. Output remained steady through the 1970s, peaking at 278 units in 1974 amid high demand for mid-horsepower road-switchers suitable for freight and yard service. Despite economic challenges in the railroad sector during the early 1980s recession, manufacturing continued without major interruptions until July 1986. Over this 14-year run, a total of 2,213 GP38-2 locomotives were constructed, making it one of the most prolific four-axle designs in EMD's history.[2][27] The Dash 2 improvements, including the introduction of more consistent manufacturing processes in the mid-1970s, contributed to the model's reputation for durability, with many units achieving service lives exceeding 40 years. Variant-specific builds, such as the wide-cab GP38-2W for Canadian railways, were integrated into the same production framework but adapted for regional requirements. Unit costs during the 1970s averaged around $300,000 to $400,000 in base configuration, depending on options like dynamic braking enhancements or specialized paint schemes, which could add 10-20% to the price.[28]Original Buyers and Orders
The EMD GP38-2 saw significant demand from major U.S. railroads seeking reliable medium-horsepower locomotives for freight service, with bulk orders enabling fleet standardization and cost efficiencies during the 1970s economic expansion in rail transport. The Baltimore and Ohio Railroad was the largest original buyer with 218 units delivered from 1972 to 1981 for general freight duties.[2] The Southern Railway acquired 257 units from 1972 to 1985, prioritizing the model for its versatility in yard and road assignments, often with custom high-short hood configurations.[29] The Union Pacific ordered 60 units in 1974 and 1975, integrating them into heavy-haul operations to supplement higher-powered SD40-2s.[30] Canadian railroads also contributed to early production, reflecting cross-border demand for the Dash 2 series' improved reliability. Canadian National ordered 84 units (33 standard GP38-2 and 51 GP38-2W variants with wide-nose cabs for enhanced crew comfort in harsh winter conditions), delivered from 1972 to 1974.[31] Canadian Pacific followed with 82 units from 1973 to 1986, focusing on mainline and secondary freight to modernize its aging fleet.[32] International adoption extended the model's reach, with Ferrocarriles Nacionales de México purchasing 124 units from 1975 to 1983 for mixed freight and passenger services, some equipped with steam generators for heater cars.[33] These orders exemplified broader patterns in GP38-2 acquisitions, where railroads placed large, multi-year batches to achieve economies of scale, with deliveries peaking amid the 1970s freight boom driven by industrial growth and energy demands; overall production exceeded 2,200 units across 14 years.[2]| Railroad | Units Ordered | Delivery Years | Notes |
|---|---|---|---|
| Baltimore and Ohio | 218 | 1972–1981 | Largest U.S. buyer; general freight |
| Southern Railway | 257 | 1972–1985 | High-short hood options for visibility |
| Union Pacific | 60 | 1974–1975 | Heavy-haul integration |
| Canadian National | 84 (33 GP38-2 + 51 GP38-2W) | 1972–1974 | Wide-cab variants for safety |
| Canadian Pacific | 82 | 1973–1986 | Fleet modernization |
| Ferrocarriles Nacionales de México | 124 | 1975–1983 | Some with steam generators |
Operational History and Modifications
Service Life Across Railroads
The EMD GP38-2 has demonstrated exceptional versatility in its operational roles, primarily serving in road freight, hump yard switching, and local service across North American railroads. Its 2,000 horsepower output strikes a balance between power and maneuverability, making it suitable for a wide range of duties including mainline freights, yard operations, helper service, and even snow removal trains.[34] This adaptability has allowed the locomotive to thrive in diverse environments, from heavy classification yards to branch line assignments.[14] Many GP38-2 units have achieved service lives exceeding 40 years, with a significant portion surpassing 50 years due to their robust design and reliable EMD 645E3 engine. For instance, Norfolk Southern maintains approximately 246 active GP38-2s as of mid-2025, many deployed in helper service on mountainous grades in the eastern United States.[35] This longevity underscores the model's enduring value in fleets where reliability outweighs the need for higher horsepower in secondary roles.[14] Regional adaptations highlight the GP38-2's flexibility to varying operational demands. On western carriers like BNSF, the locomotives handle heavier loading in local and switching assignments, often in resource-intensive regions with demanding terrain.[36] In contrast, eastern railroads such as CSX utilize them predominantly for lighter yard duties and short-haul locals, leveraging their compact size for efficient maneuvering in congested facilities.[37] Retirement trends for the GP38-2 accelerated in the 1990s and 2010s as Class I railroads prioritized higher-horsepower models like the SD70 series for mainline efficiency. However, the model's cost-effectiveness and parts availability have sustained its presence, with hundreds of units still in active service across North America and Mexico as of 2025, including significant numbers on short lines, regionals, and in Mexico.[37][35][36]Rebuilds and Upgrades
Norfolk Southern undertook significant rebuild programs for its GP38-2 fleet at the Juniata Locomotive Shop in Altoona, Pennsylvania, converting older GP38 and GP38AC units to full Dash-2 specifications. Between 2000 and 2004, 80 units (numbered 5500-5579) received new cabs, AR10 alternators in place of DC generators, air conditioning, extended-range dynamic brakes, and reconfiguration for short-hood-forward operation to improve crew visibility and ergonomics.[38] A follow-on program from 2005 to 2007 rebuilt an additional 73 units (5601-5673) from former Conrail and NS GP38s, incorporating similar upgrades including Smart Start technology for enhanced starting reliability.[39] These efforts extended the service life of the locomotives while modernizing them for continued yard and road switcher duties. CSX Transportation's GP38-3 program, launched in the early 2000s at the Huntington Engine Shops in West Virginia, focused on repowering and upgrading existing GP38-2s to meet evolving emissions and safety standards. The rebuilds included installation of new crashworthy cabs, rebuilt generators, updated electrical cabinets, air start systems, and all-new electronics, including electronic brake systems; at least 22 units were planned in 2014 alone, with many featuring upgrades for improved performance.[40][41] These modifications addressed regulatory compliance, particularly for operations in populated areas, and integrated positive train control (PTC) interfaces by the 2010s to fulfill federal mandates for collision avoidance.[40] In the 1990s, VMV Enterprises in Paducah, Kentucky, specialized in GP38-2 rebuilds for multiple railroads, upgrading units to GP38-3 standards with improved components for better fuel efficiency and performance. Notable examples include Kansas City Southern's 2002 (rebuilt in 1998 from an earlier GP38-2), 2005 (renumbered from 2002 and retired in 2008), and 2006 (completed in October 1997 as 4099 before reassignment); similar work was done for Union Pacific and others, often involving engine overhauls and electrical enhancements.[42] These third-party programs provided cost-effective alternatives to new purchases, allowing smaller carriers to maintain fleets without in-house facilities. Helm Financial Corporation (reporting mark HLCX) leased numerous rebuilt GP38-2s featuring quiet cabs designed to reduce noise levels for crew comfort during long shifts, as part of broader upgrade initiatives in the late 1990s and 2000s. Units like HLCX 3805 and 3828 exemplify this approach, retaining the core 2,000-horsepower 16-645E3 engine while incorporating modernized interiors and sound-dampening materials. Post-2010 upgrades across GP38-2 fleets commonly included electronic parking (EP) brakes for precise control and reduced maintenance, LED headlights and marker lights for energy savings and longevity, and PTC compatibility hardware to enable interoperable safety signaling. Norfolk Southern's GP38-3 conversions from GP50s (37 units completed in the 2000s) further exemplified emissions-focused repowers, derating 16-645F turbocharged engines to 16-645E3 Roots-blower variants at 2,000 horsepower while adding microprocessor-based controls for optimized wheel slip and adhesion.[43] These enhancements have sustained fleet availability, with rebuilt units demonstrating extended mean time between failures in demanding service.[44]Preservation and Legacy
Preserved Examples
Several notable examples of the EMD GP38-2 have been preserved, primarily at museums and tourist railroads in the United States, where they serve educational, operational, and excursion purposes. These locomotives, often former units from major carriers like the Southern Railway and Norfolk Southern, highlight the model's enduring reliability and historical significance in freight service. As of 2025, at least a dozen such units are documented in preservation, with many restored to operational status through dedicated volunteer efforts.[45][46] One of the most prominent preserved examples is Southern Railway No. 5000, the very first GP38-2 produced in January 1972 by Electro-Motive Division. Acquired by the Tennessee Valley Railroad Museum (TVRM) in Chattanooga, Tennessee, in 2016 through a trade involving another GP38-2, it underwent restoration that year, including repainting in its original Southern Railway scheme for the first time since 1988. The locomotive, rated at 2,000 horsepower, is fully operational and regularly used for switching duties and excursion trains at TVRM.[29][45][47] TVRM also maintains additional ex-Southern GP38-2s, including No. 5044 (built March 1973) and No. 5109 (built 1974), both restored and operational for museum operations. These units, like No. 5000, benefit from volunteer-led projects that emphasize historical accuracy, such as applying era-specific paint and maintaining mechanical integrity using parts sourced from still-active fleets. In contrast, some preserved GP38-2s remain static displays due to challenges in obtaining rare components amid the model's ongoing service life on Class I railroads.[48] Another key example is former Norfolk Southern (ex-Southern) No. 5128, a high-nose variant built in 1974, now operating on the Colebrookdale Railroad in Boyertown, Pennsylvania. Donated to the Colebrookdale Railroad Preservation Trust in 2017 and placed into service in 2019, it powers tourist excursions along an 8.5-mile scenic route, demonstrating the model's adaptability for heritage operations.[46] Preservation efforts across these sites often involve community volunteers addressing maintenance hurdles, such as sourcing Dash 2-era electrical systems, ensuring about 10-15 units remain excursion-ready as of 2025 while others function as static exhibits.[49]| Locomotive | Original Owner | Build Year | Location | Status | Notes |
|---|---|---|---|---|---|
| Southern 5000 | Southern Railway | 1972 | TVRM, Chattanooga, TN | Operational | First GP38-2 built; restored 2016 with original paint.[29] |
| Southern 5044 | Southern Railway | 1973 | TVRM, Chattanooga, TN | Operational | Used for excursions and switching.[48] |
| Southern 5109 | Southern Railway | 1974 | TVRM, Chattanooga, TN | Operational | Part of TVRM's diesel fleet.[48] |
| NS 5128 | Norfolk Southern (ex-Southern) | 1974 | Colebrookdale Railroad, Boyertown, PA | Operational | High-nose; acquired 2017 for tourist service.[46] |