Fact-checked by Grok 2 weeks ago

Perthite

Perthite is a textured variety of alkali feldspar characterized by an intimate intergrowth of sodic plagioclase (primarily albite, NaAlSi₃O₈) and potassic feldspar (orthoclase or microcline, KAlSi₃O₈), formed through subsolidus exsolution during the slow cooling of magmatic rocks.^[1]^[2] This exsolution occurs below the solvus temperature in the feldspar phase diagram, where a once-homogeneous high-temperature solid solution unmixed into two distinct phases, typically manifesting as parallel lamellae, blebs, or stringers of the sodic component within the potassic host.^[1]^[3] The term "perthite" derives from its type locality near Perth, Ontario, Canada, where it was first described as an intergrowth in granitic pegmatites.^[2] Perthitic textures are prevalent in felsic igneous rocks such as granites and syenites, particularly those formed under low water pressure conditions (around 200 MPa) and temperatures exceeding 700°C, as in hypersolvus granites where a single feldspar phase crystallizes initially.^[1] In contrast, subsolvus granites, which crystallize under higher water pressures (over 500 MPa), typically develop separate grains of alkali feldspar and plagioclase rather than intergrowths.^[1] Several varieties of perthite exist based on the scale, orientation, and proportions of the intergrown phases. Microperthite features lamellae visible only under microscopic examination, while coarser forms like vein, string, or patch perthite display naked-eye textures.^[1] Antiperthite refers to the inverse structure, with potassic feldspar lamellae in a sodic host, and mesoperthite involves roughly equal volumes of both components.^[1]^[2] These textures provide critical insights into the cooling history, pressure-temperature conditions, and magmatic evolution of igneous rocks, serving as petrological indicators for distinguishing between dry, high-temperature plutons and wetter, lower-temperature ones.^[1] Perthite is commonly associated with minerals like quartz, muscovite, and biotite in granitic environments.^[2]

Etymology and History

Naming Origin

The name "perthite" derives from the town of Perth in Lanark County, Ontario, Canada, where the mineral texture was first identified in specimens collected from nearby pegmatites in the early 19th century.^[2] This locality, specifically around Otty Lake and North Burgess Township approximately 9.5 km southwest of Perth, served as the type locality for the texture, which consists of intergrowths within alkali feldspars. In 1843, Scottish chemist and mineralogist Thomas Thomson, Regius Professor of Chemistry at the University of Glasgow, formally described and named the texture "perthite" in a paper presented to the Glasgow Philosophical Society, honoring the Canadian locality where local physician James Wilson had collected and sent the original specimens for analysis.^[4] Thomson's naming reflected the growing practice of associating mineral terms with their discovery sites to facilitate scientific reference and recognition.^[5] The suffix "-ite" in "perthite" adheres to the longstanding mineralogical convention, commonly appended to root names derived from localities, people, or properties to designate new minerals, varieties, or textures, as established in early 19th-century nomenclature practices.^[6] This ending, originating from Greek roots meaning "stone" or "rock," has been widely used since the 18th century to denote mineral species in systematic classifications.^[7]

Historical Discovery

The initial observation of perthite occurred around 1841 when specimens were collected near Perth, Ontario, Canada, by local physician James Wilson, who sent them to Scottish chemist Thomas Thomson for analysis, where it appeared as a distinctive interlaminated feldspar. Thomson formally described and named the material as a new mineral species in 1843, based on chemical analysis of the specimens, highlighting its composition as a potassium-rich feldspar with sodium inclusions.^[8] In 1863, Sir William E. Logan, director of the Geological Survey of Canada, provided more detailed descriptions of perthite during his comprehensive surveys, documenting its prevalence in Laurentian granitic rocks across eastern Canada and emphasizing its textural variations in pegmatites and intrusions. Logan's work built on Thomson's observations by integrating perthite into broader regional geology, noting its association with orthoclase and albite in crystalline terrains. Early 20th-century investigations advanced the understanding of perthite beyond a mere mineral variety. For instance, Jean Dugas's 1952 study of the Perth map-area confirmed its origin as an exsolution texture resulting from the unmixing of alkali feldspars during slow cooling, shifting perceptions from a distinct phase to a key petrological indicator in granitic systems. This recognition solidified perthite's role as a diagnostic feature for interpreting igneous cooling histories in continental crust.^[9]

Description and Composition

Definition and Texture

Perthite is an intimate intergrowth of sodic plagioclase, primarily albite, and potassic alkali feldspar, such as orthoclase or microcline, occurring within a single crystal where the potassic phase serves as the host.^[1]^[10] This texture results from the exsolution of a homogeneous high-temperature feldspar solid solution upon cooling.^[11] The intergrowth manifests in several characteristic textures, including lamellar perthite with parallel lamellae of albite aligned within the host, vein perthite featuring irregular veins of albite that follow crystallographic directions like (100), braid perthite displaying en echelon arrangements of albite spindles forming braided patterns parallel to (100), and patch perthite consisting of irregular, rounded patches of albite with diffuse boundaries.^[12]^[13] These textures are often visible at the microscopic scale, with microperthite resolvable under an optical microscope and finer cryptoperthite requiring electron microscopy.^[10] In thin sections under crossed polarized light, perthite appears as a host of microcline exhibiting distinctive tartan twinning, intersected by gray, globular areas of albite that show low birefringence and first-order gray interference colors.^[11]^[14] This contrasts with antiperthite, in which plagioclase is the dominant host phase containing exsolved lamellae of potassic feldspar.^[10]

Mineral Components

Perthite is composed of an intergrowth between a potassium-rich alkali feldspar as the host mineral and a sodium-rich plagioclase as the exsolved phase, forming from the unmixing of a high-temperature solid solution. The host phase is predominantly orthoclase (KAlSi₃O₈) or microcline (KAlSi₃O₈), both polymorphs of potassium feldspar that provide the dominant matrix in which the exsolved lamellae or blebs are embedded.^[2]^[15] These K-rich phases typically exhibit triclinic or monoclinic crystal structures, with microcline being the stable low-temperature triclinic form common in slowly cooled igneous rocks.^[16] The exsolved phase within perthite is mainly albite (NaAlSi₃O₈), a sodic end-member of the plagioclase series, appearing as thin lamellae, stringers, or patches of contrasting optical properties against the host.^[2]^[10] In rarer instances, the exsolved plagioclase may be oligoclase, which incorporates minor calcium through the substitution Na⁺ + Si⁴⁺ ↔ Ca²⁺ + Al³⁺, resulting in compositions ranging from Ab₉₀An₁₀ to Ab₇₀An₃₀.^[2]^[15] The overall chemical formula for the perthitic intergrowth reflects this binary solid solution as (K,Na)AlSi₃O₈, where the proportions of K and Na vary but typically favor K in the host (Or >50 mol%) and Na in the exsolved phase (Ab >90 mol%).^[15]^[16] Minor substitutions are uncommon in perthite but can include small amounts of Ca²⁺ in the plagioclase lamellae (up to ~15 wt% anorthite component in broader alkali feldspar contexts, though limited in exsolved phases) or Ba²⁺ replacing K⁺ in the host alkali feldspar, as seen in rare varieties like hyalophane.^[15]^[10] These trace elements, along with occasional Sr²⁺ or Fe, do not significantly alter the primary K-Na framework but may influence optical or geochemical properties in specific occurrences.^[15] Such substitutions are generally rare and negligible in most perthitic textures, preserving the end-member compositions of KAlSi₃O₈ and NaAlSi₃O₈ as the defining components.^[17]

Formation Mechanisms

Exsolution Process

Perthite forms through subsolidus exsolution, a process in which a high-temperature homogeneous solid solution of alkali feldspar undergoes phase separation upon cooling, driven by a decreasing solubility of sodium (Na) and potassium (K) components in the feldspar structure.^[16] This unmixing occurs along the binary join between the end-members orthoclase (\ce{KAlSi3O8}) and albite (\ce{NaAlSi3O8}), where the miscibility gap widens below approximately 650–700 °C, leading to the segregation of a sodium-rich plagioclase phase (typically albite) from a potassium-rich host (typically microcline or orthoclase).^[16] The process is fundamentally controlled by Na⁺–K⁺ interdiffusion within the coherent aluminosilicate framework, which remains structurally intact during the initial stages of separation.^[16] The growth of exsolved phases manifests as diffusion-controlled development of lamellae, strings, or patches, where the sodium-rich phase precipitates coherently or semi-coherently from the potassium-rich matrix.^[16] This diffusion occurs via volume (intragranular) transport, most efficient at elevated temperatures, resulting in compositional modulations that coarsen over time as the system approaches equilibrium.^[18] Near the solvus critical composition, spinodal decomposition may initiate the process with low-amplitude waves of composition, which then evolve into distinct intergrowths through continued diffusion.^[19] Away from this region, nucleation and growth dominate, with heterogeneous nucleation often favored on defects or pre-existing boundaries to minimize energy barriers.^[16] Coherency strains play a pivotal role in dictating the morphology of the intergrowth, arising from the mismatch in ionic radii between Na⁺ (1.02 Å) and K⁺ (1.38 Å), which induces elastic stresses at the phase boundaries.^[16] These strains favor the orientation of lamellae along low-energy planes, such as (601) or {661}, to minimize interfacial energy and strain accumulation, influencing whether the exsolution develops as fine, parallel lamellae or irregular patches.^[16] As exsolution progresses, semi-coherent interfaces may form with misfit dislocations, further accommodating strain and allowing coarsening while preserving the overall bulk composition.^[16]

Cooling Conditions

The exsolution process leading to perthite formation in alkali feldspars initiates upon crossing the solvus temperature, typically in the range of 650–700°C, where a homogeneous high-temperature solid solution becomes unstable and begins to separate into Na-rich and K-rich phases. This process continues during further cooling, with fine lamellae developing at lower temperatures of 400–500°C, as diffusion allows for the formation of nanoscale to microscale intergrowths. These temperature conditions reflect the subsolidus evolution in igneous rocks, where the coherent solvus is intersected under typical magmatic structural states.^[20] In plutonic environments, slow cooling rates on the order of 1–10°C per million years facilitate the necessary atomic diffusion for perthite maturation, enabling the development of coarser textures through prolonged subsolidus equilibration. Such rates are characteristic of large intrusive bodies where heat dissipation occurs gradually over geological time, contrasting with faster cooling in volcanic settings that limits intergrowth formation. These conditions ensure that diffusion distances increase, promoting the transition from coherent cryptoperthites to more visible microperthites.^[21]^[20] Pressure exerts a minor influence on perthite development, with higher pressures elevating the solvus temperature by approximately 22°C per 100 MPa, potentially suppressing exsolution onset in deeper crustal settings. However, perthite typically forms in upper crustal plutons at pressures below 5 kbar, where this effect is limited and does not significantly alter the overall textural evolution.^[20] Perthite maturation is inherently time-dependent, requiring geological timescales of millions of years for complete diffusion-driven phase separation and coarsening in slowly cooled rocks. In contrast, rapidly cooled environments, such as subvolcanic intrusions, result in incomplete exsolution, yielding finer or absent intergrowths due to insufficient time for atomic migration. This temporal aspect underscores the role of prolonged thermal histories in achieving equilibrium microstructures.^[20]

Types and Variations

Textural Types

Perthite intergrowths in alkali feldspars display distinct textural types based on the morphology and arrangement of the exsolved albite (Na-rich) and K-feldspar (K-rich) phases, observable in hand samples or thin sections under polarized light. These textures result from subsolidus processes such as diffusion-controlled exsolution or fluid-mediated replacement, influencing the visibility and interpretation of the intergrowths.^[16] Lamellar perthite consists of parallel, plate-like lamellae of albite embedded within a K-feldspar host, typically oriented near the (801) to (601) crystallographic planes. These coherent or semi-coherent films, often 1–5 μm thick in granitic rocks, form through volume diffusion during slow cooling, creating extended lenses or platelets that appear as straight bands in thin sections. This texture is prevalent in slowly cooled granitic plutons, where the fine scale enhances optical contrast between the phases.^[16]^[16] Vein perthite features irregular, vein-like fillings of albite along microfractures or stepped surfaces in the K-feldspar host, commonly aligned near the (100) or {110} planes and exceeding 100 μm in thickness. Unlike lamellar forms, these incoherent structures arise from aqueous fluid infiltration and replacement processes, often post-dating earlier diffusion textures and imparting a turbid appearance due to subgrain development. This type is documented in hydrothermally altered alkali feldspars from granitic settings. String perthite is a related texture with thin, elongated albite blebs or strings, often 0.1 mm long and 0.004 mm wide, transitional to vein perthite and formed by similar exsolution processes.^[16]^[12]^[12] Braid perthite exhibits interwoven, rope-like patterns of albite columns within the K-feldspar matrix, forming zigzag or diamond-shaped cross-sections near {661} planes with lamellae spaced 50–400 nm apart. This coherent texture develops through high-temperature diffusion exsolution, often coupled with Si-Al ordering above 700 °C, and results from multiple oriented precipitation events that create en echelon arrangements parallel to (100). It is characteristic of mesoperthites in syenitic rocks with intermediate K-feldspar ordering.^[16]^[12] Patch perthite comprises irregular, porous patches of polycrystalline albite and K-feldspar subgrains, typically larger than 100 μm, with cuspate boundaries and micropores at triple junctions that contribute to turbidity. Formed by low-temperature replacement (<500 °C) via dissolution-reprecipitation, this incoherent texture often occurs in deformed or fluid-altered rocks, where mutual replacement of phases leads to discontinuous twinning and island-like inclusions.^[16]^[12] Antiperthite is the inverse structure to perthite, consisting of potassic feldspar lamellae within a sodic plagioclase host, typically observed in more calcic compositions such as anorthosites or basic igneous rocks.^[16] Perthitic textures differ from graphic intergrowths in pegmatites, which represent eutectic crystallization of distinct quartz and feldspar phases rather than exsolution within a single alkali feldspar crystal.^[16]

Scale-Based Classifications

Perthite is classified on the basis of the scale of its exsolved lamellae, which determines the resolution methods required for observation and reflects the degree of exsolution development. These scale-based categories—cryptoperthite, microperthite, mesoperthite, and macroperthite—distinguish intergrowths primarily by lamella thickness and visibility, with finer scales indicating initial, coherent exsolution stages and coarser scales suggesting more progressed, incoherent intergrowths.^[10]^[22] Cryptoperthite features submicroscopic lamellae typically thinner than 0.1 μm, which are too fine to resolve optically and require techniques such as transmission electron microscopy (TEM) or X-ray diffraction (XRD) for detection. These lamellae often appear as coherent, strain-induced features within the host feldspar, representing early-stage exsolution where diffusion distances remain minimal.^[22]^[23] Microperthite consists of lamellae 0.1–10 μm thick, resolvable under a standard optical microscope in thin section, often appearing as fine, parallel or irregular bands within the potassium feldspar host. This scale allows for direct petrographic analysis of the intergrowth geometry, with lamellae showing partial coherency and initial signs of strain relaxation compared to cryptoperthite.^[10]^[22] Mesoperthite is characterized by roughly equal volumes of the two feldspar phases (approximately 50:50 alkali feldspar to plagioclase), with lamellae typically 10–100 μm thick, making it intermediate in scale and often observed in high-temperature syenitic or metamorphic rocks, such as those in southern Norway or Saxony. The balanced composition and coarser texture distinguish it from asymmetric perthites, highlighting a more equilibrated exsolution.^[24]^[25] Macroperthite exhibits the coarsest intergrowths, with lamellae exceeding 100 μm in thickness, visible to the naked eye or low-power hand lens as distinct, irregular patches or veins. This scale implies advanced exsolution where lamellae have coarsened significantly through diffusion and potential deformation, resulting in incoherent boundaries.^[10] The scale of perthite intergrowths provides insights into exsolution completeness, as finer cryptoperthitic structures indicate limited diffusional equilibration during rapid cooling, while macroperthitic scales reflect prolonged annealing allowing extensive coarsening and phase separation. Textural morphologies, such as lamellar or patch perthite, can occur across these scales but do not define the classification.^[22]^[24]

Occurrence and Distribution

Geological Settings

Perthite primarily occurs in felsic igneous rocks, such as granites, granodiorites, and alkali feldspar granites, where it forms through the exsolution of sodic plagioclase from potassic feldspar during subsolidus cooling.^[10] These intergrowths are characteristic of potassium-rich feldspars in these lithologies, reflecting the compositional zoning typical of evolved magmatic systems.^[1] It is also associated with pegmatites and aplites, where coarser perthitic textures develop due to the extreme fractionation and slower crystallization in these late-stage magmatic differentiates.^[2] In plutonic settings within the continental crust, perthite formation is favored by prolonged slow cooling, often in orogenic belts during collisional tectonics or in anorogenic intrusions linked to extensional or post-orogenic regimes.^[26]^[27] Perthite is rare in volcanic rocks because rapid cooling inhibits the development of visible exsolution lamellae, though cryptoperthitic varieties can occur in some hypabyssal intrusions where cooling rates are intermediate.^[28] Its global distribution is found in granitic provinces throughout Earth history, including extensive Precambrian terranes and Phanerozoic ones that are well-documented in the geological record.^[29]

Notable Localities

Perthite was first described from its type locality near the town of Perth in Ontario, Canada, specifically in North Burgess Township (now part of Tay Valley Township), Lanark County.^[30]^[2] Fine, gem-quality material suitable for lapidary use occurs in large masses within calcite veins in Dungannon Township, Hastings County.^[31] Other notable Canadian occurrences include sites in Burgess Ward, Tay Valley Township, Lanark County, Ontario, where perthite appears as lamellar intergrowths of microcline and albite in pegmatite outcrops, with lamellae typically 1-2 mm thick that pinch and swell along cleavage planes.^[2] An unusual variety was also documented from the Tory Hill stock in Haliburton County, Ontario, featuring striking textural features such as irregular exsolution lamellae and associated minor minerals like quartz and biotite.^[12] In the United States, perthite is abundant in the pegmatites of the Black Hills, South Dakota, where it forms a major constituent alongside quartz and plagioclase in zoned bodies up to several hundred feet thick, often comprising over 40% of the rock volume in feldspar-rich zones.^[32]^[33] European examples include braid perthite in granites of the Scottish Highlands, where intricate, vermicular intergrowths develop in alkali feldspars during slow cooling of Devonian intrusions. Norwegian pegmatites, particularly in the Langesundsfjorden area of Vestfold, host mesoperthitic varieties composed of maximum microcline and low albite, with both braid and film textures observed in stoichiometric alkali feldspar crystals.^[34]

Petrological Significance

Indicators of Rock History

Perthite textures serve as valuable proxies for the cooling rates of igneous rocks, particularly in plutonic environments. Coarser intergrowths, such as those with lamella spacings exceeding 10 μm in film perthites from granulite-facies terrains, reflect prolonged annealing periods associated with very slow cooling, allowing sufficient time for diffusional coarsening of exsolved phases.^[16] In contrast, finer cryptoperthitic lamellae (typically 1–5 μm) in granitic rocks indicate more rapid cooling, limiting the extent of phase separation and growth.^[16] These variations enable estimates of pluton emplacement depths, as deeper intrusions experience slower conductive cooling, promoting coarser perthite development compared to shallower, faster-cooled equivalents.^[19] Deformation significantly modifies perthite textures, providing insights into the tectonic history of host rocks. Patch perthite, characterized by irregular, turbid subgrains often exceeding 100 μm, forms through recrystallization and replacement reactions during mylonitization or shearing, where coherent lamellae are disrupted and replaced by strain-free low albite and microcline at temperatures around 500 °C.^[16] In shear zones, perthite porphyroclasts develop augen structures enveloped by recrystallized matrices, indicating ductile deformation under greenschist to amphibolite facies conditions.^[35] This textural evolution records episodes of strain localization, with patch domains emerging from the breakdown of earlier lamellar or braid perthites under non-isochemical conditions involving fluid-mediated Na-K exchange.^[16] Solvus thermometry utilizes perthite lamella spacing to infer exsolution temperatures and cooling trajectories. The spacing of coherent lamellae relates to the cooling history, with finer widths indicating more rapid cooling rates after exsolution, limiting phase coarsening; for instance, binary solvus relations suggest exsolution initiation around 600 °C for Or-rich compositions in ordered frameworks.^[16] Lamella width is inversely proportional to cooling rate, as slower rates permit greater diffusional transport and coarsening, following relations like those derived from coarsening kinetics where spacing evolves as λ² = λ₀² + k_T t, with k_T as a temperature-dependent rate constant.^[16] These empirical correlations, calibrated against experimental data, allow reconstruction of thermal paths, particularly in ternary systems where minor anorthite content significantly elevates solvus temperatures, potentially by hundreds of degrees Celsius.^[16] Braid perthites act as strain indicators, revealing multiple post-exsolution deformation phases. These textures, featuring diamond-shaped albite columns with coherent {661} interfaces and spacings of 50–300 nm, initially form during cooling but are subsequently modified by strain, such as cracking along prism and pyramidal planes that distorts the braided pattern into shear bands.^[16] In deformed samples, braid domains show localized alterations along post-exsolution fractures, indicating episodic tectonic activity that overprints the primary exsolution fabric without fully erasing it.^[36] Such modifications, observed in layered intrusions like Klokken, document progressive strain accumulation during uplift or regional metamorphism.^[16]

Analytical Applications

Optical microscopy, particularly polarized light microscopy of thin sections, is a fundamental technique for identifying perthite textures and observing twinning patterns in alkali feldspars. In thin sections, perthite appears as intergrowths of potassium-rich feldspar (orthoclase or microcline) with sodium-rich lamellae (albite or oligoclase), where the contrasting birefringence and extinction angles allow differentiation of the phases. Tartan twinning in the microcline host and Carlsbad or albite twinning in the exsolved lamellae are commonly visible under crossed polars, aiding in texture classification such as vein, string, or patch perthite. This method is limited to lamellae thicker than about 1 μm but provides essential qualitative insights into exsolution scale and orientation.^[37]^[38]^[39] Electron microprobe analysis (EMPA) and scanning electron microscopy (SEM) enable detailed composition mapping of Na/K zoning and lamella chemistry in perthite. EMPA quantifies major element distributions, revealing Na enrichment in albite lamellae (typically >90 mol% Ab) and K enrichment in the host (>90 mol% Or), with zoning profiles across interfaces indicating diffusion-controlled exsolution. SEM, often coupled with backscattered electron imaging or energy-dispersive spectroscopy, visualizes sub-micrometer lamellae and detects trace elements like Ba or Pb that partition between phases, highlighting chemical heterogeneities from subsolidus re-equilibration. These techniques are crucial for resolving fine-scale variations in cryptoperthite where optical methods fail.^[17]^[13]^[40] X-ray diffraction (XRD), including powder and single-crystal variants, detects cryptoperthite through subtle superlattice reflections arising from the triclinic symmetry of exsolved albite domains within the monoclinic K-feldspar host. In cryptoperthite, lamellae finer than optical resolution produce weak satellite peaks or broadening of main reflections (e.g., around 201 or 060), confirming nanoscale exsolution without visible texture. These superlattice features, such as e-reflections, distinguish coherent intergrowths and quantify phase proportions when integrated with Rietveld refinement. XRD is particularly valuable for bulk samples where TEM is impractical.^[41]^[42]^[43] Transmission electron microscopy (TEM) provides high-resolution imaging of submicron lamellae and coherency strains in perthite. Bright-field and dark-field TEM images reveal coherent interfaces with lattice continuity, where albite lamellae exhibit thicknesses of 10–100 nm and associated moiré fringes from strain fields due to ~7% volume mismatch with the orthoclase host. Selected-area electron diffraction shows superlattice spots from twinned albite domains, while high-resolution TEM visualizes atomic-scale distortions at boundaries. This technique elucidates early-stage exsolution mechanisms, including spinodal decomposition, and strain relief via dislocations.^[44]^[45]^[19] Geothermobarometry models utilize perthite compositions to estimate subsolidus temperatures in granites, primarily via the alkali feldspar solvus. The solvus relation, calibrated experimentally, relates Na/K ratios in coexisting phases to temperatures of 400–700°C, with patch or vein perthite indicating slower cooling below ~500°C allowing re-equilibration. For example, integrated compositions from EMPA yield ~450–550°C for granite perthites, assuming minimal strain effects. These models, often combined with ternary feldspar diagrams, provide constraints on cooling paths but require corrections for coherency strain and fluid influence.^[46]^[47]^[16]

References

[1]
Perthite - ALEX STREKEISEN
A perthite is an intimate intergrowth of sodic and potassic feldspar resulting from subsolidus exsolution (unmixing of two minerals).
[2]
Perthite: Mineral information, data and localities.
Perthite is an intergrowth of albite or oligoclase with a microcline host, named for the city of Perth in Ontario.About Perthite · Common Associates · Perthite in petrologyMissing: definition | Show results with:definition
[3]
ORIGIN OF GRANITE IN THE LIGHT OF EXPERIMENTAL STUDIES ...
ORIGIN OF GRANITE IN THE LIGHT OF EXPERIMENTAL STUDIES IN THE SYSTEM NaAlSi3O8–KAlSi3O8–SiO2–H2O · O. F. Tuttle, N. L. Bowen · Published 1958 · Geology · Geological ...Missing: chert carbonate- diagram
[4]
[PDF] DEPARTMENT OF ENERGY, MINES AND RESOURCES
He sent a specimen for identification to Professor. Thomas Thomson of the University of Glasgow who named it for Perth in 1843. A polished specimen of ...
[5]
Diffusion-controlled and replacement microtextures in alkali ...
Jan 2, 2018 · A sample of the type perthite from Perth, Ontario (Hunterian Museum, Glasgow, M2361)was compared using light microscopy. It differs in bulk ...
[6]
A Guide to Mineral Names and Classification Systems - IGS
Jan 3, 2025 · Minerals are named after physical properties, discovery location, or people. Classification systems include Nickel-Strunz and Dana's New ...
[7]
[PDF] MlNERALOGlC TERMINOLOGY AND DESCRIPTIONS
A suffix, as used here, is a symbol, a chemical or crystallographic one, that follows a mineral name and is attached to it with a hyphen. The suffiix gives some ...
[8]
[PDF] geology of the perth map-area lanark and leeds counties, ontario
In the report of 1863 there is a summary by Logan. (1863) concerning the ... Logan, Sir W., (1863), Geology of Canada; Geol. Surv. Gan. MacFarlane, T ...
[9]
Perthite - an overview | ScienceDirect Topics
Perthite is defined as a type of feldspar that occurs in granitic rocks and is characterized by the intergrowth of both potassium feldspar and plagioclase.
[10]
Perthite - Smith College
Perthite is a K-feldspar with albite intergrowth, forming exsolution lamellae. It appears as gray/black in cross-polarized light, and is formed when two ...Missing: definition | Show results with:definition
[11]
[PDF] THn AMERIcIN MINERALoGIST - RRuff
In an investigationr of the igneous rocks of the Tory Hill stock in. Haliburton County, Ontario, an unusual perthite was encountered. Striking features of this ...Missing: Dugas 1952
[12]
Experimental development of patch perthite from synthetic ...
Aug 1, 2013 · In this study, deuteric coarsening of a lamellar cryptoperthite to a patch perthite has been experimentally induced for the first time.<|control11|><|separator|>
[13]
K-feldspar (orthoclase, microcline, sanidine and related varieties)
Intergrowths - Perthite is created when an original high temperature feldspar unmixes (exsolves) into two compositions. Perthites grains consist of zones of Na ...
[14]
https://sites.und.edu/dexter.perkins/opticalmin/kspar.htm
[15]
Routine characterization and interpretation of complex alkali ...
May 1, 2015 · Peristerites are nanometer-scale intergrowths of albite and oligoclase that form by exsolution at a coherent solvus that is conditional on Si-Al ...<|control11|><|separator|>
[16]
[PDF] Trace element distributions between the perthite phases of alkali ...
The distribution of various trace elements between the K-feldspar and albite phases of perthites from several pegmatites was determined by ion micro- probe.
[17]
Modeling Exsolution (and Perthite Formation) as an Example of ...
This exercise illustrates how intracrystalline diffusion works to create compositional segregations in crystalline solids, a process called exsolution.Missing: Dugas 1952
[18]
[PDF] exsolution by spinodal decomposition ii: perthite formation during ...
Exsolution may occur by nucleation and growth and/or by spinodal decomposi- tion (Cahn, 1968). Irrespective of the exsolution mechanism, the initial phase ...
[19]
review - GeoScienceWorld
For plutonic bodies calculation of cooling rates from coher- ent film lamellae is uncertain because of long extrapolations in t from the range of diffusion ...
[20]
Age, Origin and Cooling History of the Coronel João Sá Pluton ...
This time-scale is orders of magnitude shorter than the millions of years' cooling period for a deeply buried pluton. ... C, and a cooling rate of 36°C/Myr.
[21]
Diffusion-controlled and replacement microtextures in alkali ...
Thomson, T. (1843) Notice of some new Minerals. Philosophical Magazine, Series 3, 22, 188–194. Tuttle, O.F. and Bowen, N.L. (1958) Origin of granite in the ...
[22]
Diffusion-controlled and replacement microtextures in alkali ...
Thomas Thomson, Regius Professor of Chemistry at Glasgow University, who gave it the name. 'perthite' (Thomson, 1843). The local museum in. Perth has a ...
[23]
Chapter 3 Perthites, Mesoperthites, Antiperthites and Peristerites
Accepting this definition, one means that the difference between perthites and antiperthites is a question of grades rather than of principle, a view also ...
[24]
Mesoperthite: Mineral information, data and localities.
Aug 15, 2025 · Mesoperthite is a perthite with approximately equal amounts of alkali feldspar and plagioclase, and a variety of Feldspar Group.Missing: lunar | Show results with:lunar
[25]
Igneous Rocks of Contintental Lithosphere
Feb 15, 2011 · Granites that crystallize under low pressure and exhibit a single perthitic alkali feldspar are considered hypersolvus granites. At higher ...
[26]
Petrogenesis of anorogenic peralkaline granitic complexes from ...
Mar 9, 2017 · Rocks of Mounts Abu-Kharif and El-Dob are made up of hypersolvus granites, consisting essentially of alkali-feldspar (mainly perthite), quartz, ...Geological Setting · Petrography And Mineral... · Results<|control11|><|separator|>
[27]
Alkali Feldspar Microtextures as Provenance Indicators in ...
Mar 9, 2017 · The term perthite should properly be reserved for intergrowths in which Ab-rich plagioclase lamellae or patches are enclosed by Or-rich feldspar ...<|control11|><|separator|>
[28]
[PDF] The Origin of Granites and Related Rocks
cooling rates ( > 100°C Ma-1. ) minimize the effects of post -anatectic ... general, the source of granite plutons for two reasons. A). Composition ...
[29]
Perthite Value, Price, and Jewelry Information
Jan 15, 2021 · Perthite is a blend of microcline, albite and oligoclase. It is usually brown and white. May have gold or white iridescence.Missing: geology | Show results with:geology
[30]
[PDF] the journa_l of gemm()logy - the journal of gemmology
Perthite is also found in large masses in Lot 20, Concession X, in the township of Dungannon, Hastings County, Ontario ; in. Lot 3, Concession VI, in the ...
[31]
[PDF] Pegmatite Investigations 1942-1945 Black Hills, South Dakota
This report describes pegmatite deposits in the Black Hills from 1942-1945, including mica, beryl, lithium, tantalum, tin, and feldspar, as part of strategic ...
[32]
[PDF] Geology of the Hugo Pegmatite Keystone, South Dakota
There are pegmatites in the Black Hills in which perthite is the most abundant mineral, but they also contain almost as much quartz and plagio- clase as ...
[33]
Braid perthite in nepheline syenite pegmatite, Langesundsfjorden ...
Both types of perthite are mesoperthitic and composed of maximum microcline and low albite. Chemical analyses suggest that the alkali feldspar is stoichiometric ...
[34]
[PDF] 2/28199 John Longhi, P. I. La
Mar 1, 1993 · of the lunar ferroan-anorthosite suite. In Lunar and. Planetary ... mesoperthite. (Wihnart el a/.,. 1989). Experimental results. At 5 kbar.
[35]
Transition from fracturing to viscous flow in granulite facies perthitic ...
The main feature of the shear zones is that they display an Augen-structure where perthite porphyroclasts are surrounded by a recrystallized matrix. The ...
[36]
[PDF] Micropores and micropermeable texture in alkali feldspars - RRuff
The Ab- and Or-rich phases in patch perthite are made up of discrete subgrains and the cuspate pores often develop at triple-junctions between them. Coarsened ...
[37]
https://link.springer.com/content/pdf/10.1007/BF00375357.pdf
[38]
[PDF] Perthite in nepheline syenite from the kakortokite unit in the ...
Perthite, an intimate intergrowth of Na- and K- feldspar, is widespread in felsic igneous rocks. The structure of the intergrowth is frequently interpreted as ...
[39]
THE EVOLUTION OF TWIN PATTERNS IN PERTHITIC K ...
Aug 1, 2012 · However, this pattern cannot be seen at the TEM scale in samples having it at the optical scale (Akizuki 1972). ... perthite as a rock ...
[40]
Semibrittle deformation and partial melting of perthitic K‐feldspar: An ...
Feb 16, 2014 · Sample deformation was carried out at a constant strain rate of ~ 10−6 s−1. The samples deformed at 700°C show typical brittle behavior with ...Missing: braid | Show results with:braid
[41]
[PDF] MINERALOGICAL MAGAZINE Feldspars and fluids in cooling plutons
and it requires X-ray diffraction to show that it is a cryptoperthite. At ... Feldspar Mineralogy, Y-I-Y-54; ed. Ribbe. (P. H.); Miner. Soc. Am. Short ...
[42]
[PDF] Electron Microscopy in Mineralogy - University of California, Berkeley
... X-ray diffraction techniques. With the optical microscope we are able to ... cryptoperthite. (From Brown et al .• 1972.) (a) hkO precession photograph ...
[43]
[PDF] Copyright 2019. De Gruyter. All rights reserved. May not be ...
... x-ray diffraction patterns this phenomenon would show up as rows of spots similar to superlattice reflections ... cryptoperthite will often remain monoclinic to ...
[44]
[PDF] Stress and Strain in Cryptoperthite Lamellae and the Goherent ...
Not all cryptoper- thites are necessarily coherent however; Aberdam and Kern (1962) and Aberdam et aI (1964) ob- served 0.1 to 1.1 rrm thick lamellae whose ...
[45]
https://link.springer.com/content/pdf/10.1007/BF00371170.pdf
[46]
[PDF] perthite', a possible indicator of subsol vus temperature
Subsolvus temperature as indicated by the perthites may not be applied directly to estimate the feldspar inversion temperature due to migration of Al, but ...
[47]
[PDF] FELDSPAR THERMOMETRY A VALUABLE TOOL FOR ...
The highest temperatures, above 900oC, are derived from antiperthite porphyroclasts with evenly spaced exsolution lamellae and rods, from antiperthite - ...<|control11|><|separator|>