Fact-checked by Grok 2 weeks ago

Colt Anaconda

The Colt Anaconda is a large-frame, double-action revolver chambered primarily in .44 Magnum (with compatibility for .44 Special), manufactured by Colt's Manufacturing Company as a robust handgun designed for high-power cartridge handling and precision shooting.^[1] Introduced in 1990 to compete with models like the Smith & Wesson Model 629 and Ruger Redhawk, it features a stainless steel construction, a six-round cylinder, and a full-length under-barrel ejection rod lug for enhanced stability and reduced recoil.^[1] The original production ran until approximately 2003, after which it was discontinued, but Colt reintroduced an updated version in 2021 with refinements including improved lockwork for smoother double-action pulls, optics-ready configurations on select models, and Hogue overmolded grips for better ergonomics.^[1]^[2] Subsequent variants expanded the lineup, including shorter barrel options and a .45 Colt chambering introduced in 2025, offering versatility for hunting, target shooting, and self-defense applications while maintaining the Anaconda's reputation for durability—demonstrated in endurance tests exceeding 14,000 rounds without failure.^[3]^[4] Available in barrel lengths of 4.25 inches, 6 inches, and 8 inches, the revolver weighs between 49 and 59 ounces unloaded, depending on configuration, and employs a ventilated rib barrel with adjustable sights for improved accuracy, often achieving sub-1-inch groups at 25 yards in testing.^[1]^[5] Its design innovations, such as an extended cylinder (1.909 inches in the modern iteration versus 1.749 inches originally) and a crisp single-action trigger pull around 5-6 pounds, underscore its status as a premium wheelgun blending classic Colt engineering with contemporary performance.^[1]^[6]

History

Origins and Development

In the late 1980s, the Colt Anaconda emerged amid growing demand for durable .44 Magnum revolvers suitable for big-game hunting and self-defense, spurred by the enduring popularity of the Smith & Wesson Model 29 following its fame in media and the rise of stainless steel competitors like the Ruger Redhawk.^[7] Colt sought to reclaim market share in the double-action revolver segment with a heavyweight contender capable of withstanding repeated high-pressure .44 Magnum loads, addressing limitations in earlier designs that prioritized lighter weight over robustness.^[8] The Anaconda's design was spearheaded by Colt engineer Paul LaViolette Jr., a World War II U.S. Navy veteran who had previously contributed to the King Cobra and Python revolvers, adapting Colt's double-action mechanisms into a larger-scale platform for magnum cartridges.^[9] Development focused on a new "AA" frame configuration, constructed from forged stainless steel and heat-treated for enhanced tensile strength to handle the .44 Magnum's chamber pressures exceeding 36,000 psi, with prototypes rigorously tested to ensure reliability under sustained fire.^[8] This engineering emphasized overbuilt components, including a full-length underlug barrel and ventilated rib, to mitigate recoil and maintain accuracy, distinguishing it from lighter alloy-framed rivals.^[1] Officially introduced in 1990, the Anaconda debuted as Colt's flagship .44 Magnum revolver, positioned as a premium hunting tool that prioritized unyielding durability and power over concealable carry, with initial models featuring 4-, 6-, or 8-inch barrels and retailing around $800–$1,000 depending on configuration.^[8] Marketed through Colt's catalogs and industry publications as a superior alternative to the Redhawk for demanding field use, it quickly gained acclaim among hunters for its solid construction and smooth double-action trigger pull.^[7]

Production Timeline

The Colt Anaconda entered production in 1990 at the company's Hartford, Connecticut facility, initially offered exclusively in stainless steel construction with barrel lengths of 4 inches, 6 inches, and 8 inches.^[8]^[10] Colt's financial difficulties during the 1990s and early 2000s, including a Chapter 11 bankruptcy filing in 1992, strained resources and led to reduced emphasis on traditional revolver lines like the Anaconda amid broader company restructuring.^[11] Production ceased in 2003, driven by declining demand for large-frame revolvers as the firearms market shifted toward semi-automatic pistols and polymer-framed designs, with the last units shipped in early 2004.^[12]^[13] Following discontinuation, the Anaconda gained collectibility, with pristine examples commanding prices over $1,500 on the secondary market by the mid-2000s.^[14]

Reintroduction and Modern Iterations

In January 2021, Colt announced the reintroduction of the Anaconda revolver after an 18-year production hiatus ending in 2003, responding to renewed enthusiast demand for classic large-frame wheelguns in an era of increasing interest in revolver carry options and big-bore handguns.^[15]^[12]^[7] The redesigned model incorporated an enlarged version of the Python's action for enhanced reliability and durability under the stresses of .44 Magnum loads, paired with a beefed-up stainless steel frame to handle high-pressure cartridges more effectively than the original.^[15]^[16] The 6-inch barrel variant features a ventilated rib for improved heat dissipation during sustained fire and traditional sighting, while maintaining the iconic full-lug profile.^[15]^[9] Production resumed that year at Colt's West Hartford, Connecticut facility, with the initial run limited to .44 Magnum chamberings in 4.25-inch and 6-inch barrel lengths to meet immediate market interest.^[12]^[16] By 2022, manufacturing had scaled to include an 8-inch option, supporting broader availability as part of Colt's ongoing Snake Gun series revival.^[17] In 2024, Colt reintroduced the Kodiak variant as a specialized .44 Magnum model with a 4.25-inch Magna-ported barrel to reduce muzzle rise and recoil in backcountry applications, featuring an unfluted cylinder and Hogue overmolded grips for rugged use.^[18]^[19] The lineup expanded further in 2025 with the addition of .45 Colt chambering across 4.25-inch, 6-inch, and 8-inch stainless steel models, offering versatility for shooters preferring the cartridge's milder recoil profile while retaining the Anaconda's robust double-action/single-action mechanism.^[20]^[3] As of 2025, production of the Anaconda continues at the West Hartford plant, with standard models carrying an MSRP starting at $1,699, reflecting sustained demand for these updated classics in both sporting and defensive roles.^[21]^[20]

Design and Features

Frame and Action

The Colt Anaconda features a large-frame design constructed from forged stainless steel, providing the necessary robustness to manage the intense recoil of .44 Magnum cartridges. This frame is comparable in size to the Smith & Wesson N-frame, with a bulked-up structure including a thick top strap and reinforced crane to enhance durability under high-pressure loads up to 36,000 psi, as specified for .44 Magnum ammunition. A ventilated rib along the top strap aids in barrel alignment and heat dissipation during extended firing sessions. The design is also employed in the .45 Colt variant introduced in 2025, maintaining compatibility with standard .45 Colt ammunition.^[9]^[22]^[15]^[3] The revolver employs a double-action/single-action mechanism, originally utilizing a traditional leaf spring for reliable operation, which was refined in the 2021 redesign to a Linear Leaf Spring system for improved consistency and reduced stacking. This action delivers a smooth double-action trigger pull averaging 9 to 10 pounds and a single-action pull of approximately 5 pounds, contributing to precise shot placement without compromising speed. The system ensures no reported timing issues in stress testing, maintaining reliable function over thousands of rounds.^[15]^[23]^[9] Cylinder lockup is achieved through a dual-point system involving the primary bolt engaging the cylinder notches and the hand providing additional torque for secure alignment, preventing movement during firing. A full-length ejector rod housing is integrated directly into the frame across all barrel lengths, bolstering overall structural integrity and protecting the rod from damage. For ergonomics, the Anaconda incorporates Hogue overmolded rubber grips with finger grooves to mitigate recoil, paired with an unloaded weight ranging from 48 to 59 ounces depending on configuration, which helps stabilize the firearm during heavy use.^[24]^[15]^[9]^[25]

Barrel and Cylinder

The Colt Anaconda revolver features barrel lengths that have evolved across its production history. The original models, introduced in 1990, were offered in 4-inch, 6-inch, and 8-inch configurations, providing options for concealed carry, general use, and precision shooting, respectively.^[17] In modern iterations since 2021, standard barrel lengths include 4.25 inches and 6 inches, with an 8-inch variant available for extended-range applications. Select original models were factory-equipped with Magna-porting, a multi-hole venting system along the barrel's top, designed to reduce muzzle flip and recoil during rapid fire.^[5]^[26] The Anaconda's cylinder is a robust 6-round design, engineered to handle the high pressures of .44 Magnum ammunition. Standard cylinders are fluted to reduce weight and aid in heat dissipation, while the Kodiak variant features an unfluted cylinder for added strength and a more solid appearance.^[27] The cylinder's extended length—1.749 inches in original models and 1.909 inches in newer versions—accommodates .44 Magnum cases up to the maximum SAAMI specification of 1.285 inches, ensuring reliable chambering of both standard and heavy bullets without protrusion.^[6] Internally, the barrel employs a 1:20-inch left-hand twist rifling with six grooves, optimized for stabilizing .44 Magnum bullets ranging up to 300 grains, which promotes accuracy across various loads from light .44 Special to full-power magnum rounds.^[26]^[17] The revolver's ejector system includes a swing-out cylinder mounted on a sturdy crane, allowing quick reloading, paired with a star ejector that enables simultaneous expulsion of all six spent cases upon activation.^[28] Longer-barrel models feature a full-length underlug that encases the ejector rod, protecting it from damage and enhancing structural rigidity during recoil.^[29] For sustained firing, the barrels incorporate a ventilated rib along the top, which helps dissipate heat buildup from repeated .44 Magnum discharges, minimizing distortion and maintaining shot-to-shot consistency.^[21] This design, supported by the revolver's robust frame for secure cylinder lockup, contributes to the Anaconda's reputation for reliability under heavy use.^[30]

Sights and Ergonomics

The Colt Anaconda features a standard sights configuration consisting of a ramp-style front sight with a red insert for enhanced visibility, particularly in low-light conditions, paired with an adjustable rear sight.^[31] The front sight is user-replaceable via a single screw, while the rear sight is dovetail-mounted with a locking screw for windage and elevation adjustments, allowing for precise zeroing in various hunting or field scenarios.^[26] This setup prioritizes quick target acquisition over intricate optics, though the frame's top strap is drilled and tapped to accommodate aftermarket scope mounts or red dot optics for extended-range applications.^[32] Ergonomic grips on the Anaconda are typically Hogue rubber panels, designed with pronounced finger grooves and fine checkering to accommodate larger hands and promote a secure hold during rapid fire.^[26] Optional wood panels, often featuring a Colt medallion, are available for a more traditional aesthetic but offer less recoil absorption compared to the rubber variants.^[32] These grips effectively mitigate the sharp recoil of .44 Magnum loads by distributing force across the palm and fingers, resulting in noticeably reduced muzzle rise and improved control relative to lighter-frame competitors.^[26] The revolver's balance is forward-heavy, owing to the full-length ejector-rod shroud and extended barrel, which shifts weight distribution toward the muzzle for steadier aiming and reduced flip under recoil.^[32] With a 6-inch barrel, the overall length measures 11.5 inches and weighs approximately 53 ounces, contributing to a stable platform that minimizes shooter fatigue during prolonged sessions.^[26] This design enhances pointability, making the Anaconda particularly well-suited for hunting where instinctive shouldering is key. Recoil management is bolstered by the heavy stainless-steel frame and oversized cylinder, which together absorb the high energy of .44 Magnum cartridges exceeding 1,200 foot-pounds.^[32] The forward-biased weight and rubber grips further dampen felt recoil, allowing for faster follow-up shots without excessive hand strain.^[26] User reports highlight its effectiveness in hunting contexts, with praise for natural pointability and sustained comfort after 50 rounds, though the exposed backstrap can transmit some sting during full-power loads.^[32]

Variants

Original Models

The original Colt Anaconda models, produced from 1990 to 2003, were chambered exclusively in .44 Magnum and compatible with .44 Special ammunition, featuring a six-shot cylinder designed for robust handling of high-pressure loads.^[8]^[33] These revolvers were offered in three primary barrel configurations: a 4-inch compact variant for concealed carry or general use, a 6-inch standard barrel suited for hunting, and an 8-inch target or long-range option, all constructed from stainless steel with a bright polished finish. A rare uncataloged 5-inch barrel variant was also produced in limited numbers. No blued carbon steel versions were produced during this period.^[8]^[33]^[34] Additional limited-production variants included the Anaconda Hunter (1991–1993), which featured an 8-inch barrel packaged with a Leupold scope, carrying case, and both walnut and rubber grips; the Custom Ported Anaconda (produced in limited runs from 1992–1993, 1995–1996, and 2002–2003), equipped with ported barrels for recoil reduction; and the Realtree Camo Anaconda (1996), a camouflaged-finish model limited to approximately 1,000 units.^[35]^[34] Standard models were designated by barrel length, such as the 4-inch, 6-inch, and 8-inch Anacondas, without additional alphanumeric codes in official documentation. They typically shipped with two-piece checkered rosewood grips for enhanced control, though optional compensated or ported barrels were rare and limited to custom configurations.^[8] In performance testing, these original Anacondas delivered muzzle velocities averaging 1,200 to 1,400 fps with 240-grain .44 Magnum loads, such as Federal and CCI jacketed hollow points achieving 1,260 to 1,355 fps from a 6-inch barrel. Accuracy was reliable for the era, with representative 5-shot groups measuring 2 to 3 inches at 25 yards using similar loads, though early models occasionally exhibited trigger inconsistencies that affected precision until refined.^[36]^[9]

Kodiak Variant

The Colt Kodiak variant of the Anaconda revolver was first introduced in 1993 as a limited-production model designed specifically for big-game hunting, particularly in bear country.^[37] Approximately 2,000 units were produced through Colt's Custom Shop, with options for 4-inch or 6-inch Magna-ported barrels and an unfluted cylinder to enhance durability and aesthetics for rugged outdoor use.^[18] The Magna-porting featured multiple vents at the muzzle to redirect propellant gases upward, thereby reducing muzzle flip and facilitating faster follow-up shots during high-stakes encounters with dangerous game.^[37] This configuration, chambered exclusively in .44 Magnum, emphasized reliability and control for hunters facing large predators like bears.^[38] In 2024, Colt reintroduced the Kodiak as part of its expanded lineup of modern revolvers, building on the updated Anaconda platform introduced in 2021 while retaining the variant's specialized features for wilderness defense.^[39] The new model offers 4.25-inch or 6-inch ported barrels with a full underlug and ventilated rib design, incorporating six circular ports—three on each side near the muzzle—to mitigate recoil and muzzle rise when firing potent .44 Magnum loads.^[39] Like its predecessor, it features an unfluted cylinder for a robust, streamlined appearance suited to harsh environments, and the overall construction prioritizes enhanced muzzle control to support rapid, accurate shooting against threats such as bears.^[40] The 2024 Kodiak maintains its focus as an optimized tool for dangerous-game hunting, blending classic styling with practical innovations for backcountry carry.^[37]

.45 Colt Models

In 2025, Colt introduced the Anaconda in .45 Colt as an expansion of the revolver's lineup beyond the .44 Magnum chambering, announced during the NRA Annual Meeting in April. This addition leverages the platform's robust AAA stainless steel construction to accommodate the versatile .45 Colt cartridge, originally developed in 1873 for black-powder revolvers but now available in modern high-pressure loadings. The model maintains the double/single-action mechanism and 6-round cylinder capacity, with the cylinder rated to safely handle +P ammunition.^[20]^[41] The .45 Colt chambering is compatible with a range of loads, from low-velocity cowboy action rounds to +P hunting ammunition, achieving muzzle velocities up to 1,212 fps with 300-grain jacketed flat-point bullets from a 6-inch barrel. This configuration provides a balance of power and controllability, with the heavy frame mitigating recoil significantly compared to the .44 Magnum variant, positioning it as an effective trail gun for field use. Barrel lengths include 4.25 inches for concealed carry and close-range hunting, as well as 6-inch and 8-inch options for extended accuracy; all feature a ventilated rib design for weight reduction and heat dissipation.^[5]^[41]^[20] Performance testing demonstrates reliable accuracy, with average 5-shot groups measuring 1.85 inches at 25 yards using 250-grain loads, suitable for precise shot placement on medium game. The revolver's optics-ready top strap, factory-drilled and tapped, further enhances its utility for scoped hunting applications. Marketed toward cowboy action shooting enthusiasts favoring milder recoil loads and black bear hunters seeking a potent yet manageable sidearm, the .45 Colt Anaconda carries an MSRP of $1,699 and became available through distributors starting in April 2025, aligning with broader production expansions that year.^[4]^[3]^[20]

References

[1]
The Return Of The Colt Anaconda .44 Magnum
Made entirely of stainless steel, this .44 Mag. tips the scales at 53 oz. unloaded and is spec'd for 59 oz. with the optional 8″ barrel. Like the Python ...
[2]
Timeline - Colt's Manufacturing Company LLC
Colt re-introduces a redesigned Colt Anaconda in 44 Magnum. A stainless steel revolver with the name "ANACONDA 44 MAGNUM" engraved on its side. 2021. Česká ...<|control11|><|separator|>
[3]
ANACONDA (45 COLT, 4.25”) - Colt's Manufacturing Company LLC
Abstract blue and green gradient background with soft ...
[4]
The Colt Anaconda Returns: The Newest version is Chambered in ...
Oct 27, 2025 · Thirty-five years ago, Colt introduced the Anaconda double action (DA) revolver. Initially, it was chambered in .44 Magnum, then some three ...<|control11|><|separator|>
[5]
Revolvers – Colt's Manufacturing Company LLC
ANACONDA (45 COLT, 8”). $1,699.00 .357 Magnum caliber revolver with a spurred hammer a fiber optic front sight a U ...Anaconda · Anaconda (45 colt, 4.25 · Anaconda (45 colt, 6”) $1699.00 · Colt Kodiak
[6]
The New Colt Anaconda .44 Magnum - GUNS Magazine
The cylinder length is now 1.909″ as compared to the 1990s version at 1.749″. With this length cylinder the New Anaconda not only easily accepts .44 Magnum ...
[7]
New Colt Anaconda Rejoins the Snake Pit - American Handgunner
Originally developed as competition to the likes of the Smith & Wesson Model 29 and Ruger Redhawk, the Colt Anaconda was produced between 1990–2003, making it ...
[8]
This Old Gun: Colt Anaconda | An Official Journal Of The NRA
Sep 16, 2020 · Introduced in 1990, the Colt Anaconda is a large-frame, double-action revolver with a full-lugged barrel and six-round cylinder.
[9]
Colt Anaconda .44 Magnum Revolver Review: Snake Gun Revival
Nov 4, 2021 · The original Anaconda was primarily designed by the late Colt engineer Paul LaViolette Jr., a U.S. Navy veteran of World War II who also worked ...Colt Anaconda . 44 Magnum... · Recommended · Barrel & Sights
[10]
The Big Snake Is Back: Colt Anaconda Review - Gun Digest
May 17, 2022 · The Colt Anaconda was reintroduced in 2021 after being out of production for nearly 20 years ... 1990, when production began on the Anaconda.
[11]
Colt's Files for Chapter 11 Bankruptcy Protection : * Weapons
Mar 20, 1992 · Documents filed by Colt's in U.S. Bankruptcy Court in Hartford listed liabilities of $82.5 million and assets of $91.5 million as of March 1. “ ...
[12]
Colt Reintroduces the .44 Magnum Anaconda Revolver - Guns.com
Mar 22, 2021 · First introduced in 1990 as the apex of Colt's snake gun series, the Anaconda was in production until 2003 when the company put the design to ...
[13]
Colt Anaconda: Putting The Squeeze On .44 Magnum In 2021
Mar 22, 2021 · ... Colt parlance) rolled off the lines in West Hartford, Conn., discontinued in 2003. And while it doesn't quite command the awe of the Python ...<|control11|><|separator|>
[14]
Value of Colt Anaconda - The Firing Line Forums
Dec 3, 2007 · I see Anacondas in nice shape going for $1000-1200. I've seen a few LNIB that were $1500 or so. I've seen a couple sell in the $1000 price range ...How Much is a colt anaconda worth? - The Firing Line ForumsHow Much is a colt anaconda worth? [Archive]More results from thefiringline.comMissing: 2000s | Show results with:2000s
[15]
New for 2021: Colt Anaconda | An Official Journal Of The NRA
Mar 23, 2021 · The latest re-introduction in 2021 is the Colt Anaconda chambered in .44 Mag. Built on an enlarged Python receiver, the Colt Anaconda revolver is made from ...<|control11|><|separator|>
[16]
Colt To Bring Back the Anaconda - The Firearm Blog
Mar 22, 2021 · Its iconic profile comes from the full-lug, ventilated rib barrel, available in 6″ and 8″ lengths. A recessed target crown offers protection and ...
[17]
The Colt Anaconda .44 Rem. Mag. Revolver Is Back - Shooting Times
May 10, 2022 · Anaconda Specifications · Manufacturer: Colt's Mfg. Co. LLC, colt.com · Type: Double-action revolver · Caliber: .44 Magnum/.44 Special · Cylinder ...
[18]
Colt Viper, Kodiak, Grizzly, Python... Oh My!!! New Revolvers from ...
May 20, 2024 · Colt Kodiak .44 Magnum – MSRP $1,599. Again, we have a rare re-introduction with the Colt Kodiak making a resurgence in 2024. This revolver ...
[19]
The Big-Bore Colt Kodiak .44 Magnum Deep Woods Protector
Those original Kodiaks had some of the same features as the 2024 model. This includes a 4.25-inch barrel, ports for gas release, an unfluted cylinder, and an ...The Colt Kodiak Big-Bore... · The Kodiak In Hand · The Colt Kodiak Is A Welcome...Missing: Magna- | Show results with:Magna-
[20]
Colt Anaconda in .45 LC & More Blued Pythons - Guns.com
Apr 28, 2025 · Colt has some sweet additions to its snake gun series for 2025, including a .45 Colt-chambered Anaconda and several more Blued Pythons in .357 Magnum.
[21]
Anaconda - Colt's Manufacturing Company LLC
Anaconda (8") - a full-length ventilated rib 8 inch barrel length, Optics Ready, Grips matt black, 6 rounds of .44 Magnum or .44 Special ammunition capacity.
[22]
First Look: Colt Anaconda Revolver | An Official Journal Of The NRA
Mar 22, 2021 · The new Anaconda was fully redesigned to utilize an oversized Python action with a bulkier frame that adds strength. The leaf spring action ...
[23]
Review: Colt Anaconda 4-inch Revolver | An Official Journal Of The ...
Jan 2, 2024 · The new Anaconda is a large-frame, stainless steel, .44 Mag. double-action revolver that can be fired either single- or double-action.
[24]
[PDF] Double Action Revolvers - Colt
This manual describes Colt double action revolvers. The Anaconda is larger ... Colt Anaconda. 44 Cal. and. 45 Colt. King Cobra 357 Magnum or. King Cobra 38 ...
[25]
Review: Colt Anaconda Revolver | An Official Journal Of The NRA
Sep 20, 2021 · The new Colt Anaconda has been briefly summarized as a .44 Mag. built on an oversize Python frame and action. I'm thinking someone should have ...
[26]
COLT KODIAK - Colt's Manufacturing Company LLC
Chrome Colt Kodiak .454 Magnum revolver with black grip on white background · Colt Kodiak - .44 Magnum revolver 4.25-inch barrel unfluted cylinder and six-.Missing: reintroduction | Show results with:reintroduction
[27]
https://www.colt.com/detail-page/colt-kodiak-series/
[28]
https://www.gundigest.com/gun-reviews/handguns-reviews/the-big-snake-is-back-colt-anaconda-review
[29]
Rifleman Review: Colt Anaconda | An Official Journal Of The NRA
Jun 28, 2023 · The Colt Anaconda measures 12" long when equipped with a 6" barrel, and an even-longer model is available with an 8" barrel.Missing: ejector | Show results with:ejector
[30]
NRA Gun Of The Week: Colt's Anaconda - American Rifleman
Jul 16, 2021 · Colt's Anaconda is made from stainless steel and outfitted with recoil-absorbing Hogue rubber grips. The large-frame revolver is available with either a 6” or ...
[31]
Colt Anaconda .44 Magnum Review: Snake Gun Renaissance
Oct 25, 2022 · Overall Length: 13″ (for 6″ barrel model) or 15″ (for 8″ barrel model); Barrel Length: 6″ or 8″; Height: 6.25″ (approx.) Width: 1.7″ (cylinder ...Colt Anaconda Pros & Cons · Colt Anaconda . 44 Magnum... · Colt Anaconda By The Numbers
[32]
Colt Anaconda revolver in .44 Magnum - All4Shooters.com
Mar 23, 2021 · The original Anaconda was available with 4”, 6” and 8” barrels, and it appears that a hundred or so were made with a peculiar 5” barrel. It was ...
[33]
COLT'S BIGGEST SNAKE, THE ANACONDA
Nov 17, 2024 · Colt Single Action serial number GX9234 was built in .44 Magnum ... The Anaconda is available in stainless only, and I do hope they offer a blue ...<|control11|><|separator|>
[34]
Colt Kodiak .44 Magnum Revolver Review: Bear Country Boomer
May 13, 2025 · Many people will not recall the original Kodiak, which was a limited-production revolver made in 1993. Around 2,000 were reportedly made, so ...Missing: variant | Show results with:variant
[35]
Colt's Bear Guns - The Kodiak and Grizzly - GAT Daily
The Kodiak came first and premiered in 1993. It was designed to be a special run of the Anacondas. The Kodiak featured a six-inch barrel and held six rounds.
[36]
New For 2024: Colt's Grizzly & Kodiak Revolvers - American Rifleman
May 21, 2024 · Colt's new Grizzly and Kodiak revolvers are chambered in .357 Magnum and .44 Magnum, respectively, and each features barrel porting and an unfluted cylinder.Missing: production | Show results with:production
[37]
Colt Introduces Five New Revolvers - Guns and Ammo
May 29, 2024 · Its ergonomic design, complete with recoil-absorbing Hogue OverMolded grips, ensure comfort and stability; these grips are interchangeable ...
[38]
Colt's 2025 Anaconda in .45 Colt - Athlon Outdoors
Colt's big stainless, large-frame double action revolver is iconic for a reason. The modern Anaconda gives you an old-school presence that's paired with ...