Fact-checked by Grok 2 weeks ago

Cubit

The cubit is an ancient unit of linear measurement employed by numerous early civilizations, defined as the distance from the elbow to the tip of the middle finger on an average adult male's arm, typically equating to about 18 inches (45.7 cm) for the common cubit.^[1]^[2] Originating in ancient Egypt around 3000 BCE, the cubit represented one of the earliest standardized measures, with the royal cubit—extended by the width of the pharaoh's hand—measuring approximately 20.6 to 20.9 inches (52.3 to 52.9 cm) and preserved in artifacts like black granite rods for precise calibration.^[1]^[3] This unit facilitated monumental constructions, such as the Great Pyramid of Giza, whose base spans roughly 440 royal cubits (about 230 meters), demonstrating remarkable accuracy within 0.05% error.^[1] The cubit varied across cultures and eras, with Mesopotamian versions around 19.8 inches (50.3 cm), Greek cubit approximately 18.1 inches (46 cm), Roman cubit approximately 17.5 inches (44.4 cm), and a biblical cubit cited in texts like the Hebrew Bible as approximately 17.5 to 20.4 inches (44.5 to 51.8 cm), often used in descriptions of structures like Noah's Ark.^[4]^[5] Standardization efforts, including regular verification against master rods under penalty of severe punishment in Egypt, underscored its role in trade, architecture, and early metrology, influencing subsequent systems until the adoption of metric standards.^[1]^[3]

Definition and Origins

Definition and Measurement

The cubit is an ancient unit of length derived from human anatomy, specifically approximating the distance from the elbow to the tip of the middle finger. This measurement, typically ranging from 17 to 21 inches (43 to 53 cm), provided a practical, body-based standard for length before the advent of standardized tools.^[6] The term "cubit" stems from the Latin cubitus, meaning "elbow," reflecting its origin in the forearm's natural dimensions, often based on an average adult male's arm for consistency in everyday and constructive applications. As an intuitive unit, it facilitated measurements in construction and daily tasks, such as estimating building materials or distances without requiring specialized instruments.^[6] Cubits generally fell into two categories: the short cubit, around 17.7 inches (45 cm), associated with anthropological or common use, and the long cubit, approximately 20.6 inches (52.3 cm), often linked to architectural or royal standards for larger-scale projects. Royal cubits, in particular, were sometimes formalized through official rods or markings to ensure greater precision in monumental works.^[6] Due to its reliance on human proportions, the cubit lacked universal uniformity, resulting in regional variations that complicated direct conversions to modern metrics; approximate equivalents range from 0.45 to 0.52 meters, with no single formula applicable across contexts. This variability underscores the cubit's role as a flexible yet inherently approximate system, employed historically in the erection of grand structures like temples and pyramids to align with human-scale proportions.^[6]

Etymology and Linguistic Roots

The English word "cubit" derives from the Latin cubitum, denoting "elbow" or "forearm," which stems from the verb cubare meaning "to lie down" or "to bend," tracing back to the Proto-Indo-European root \ḱewb-, signifying "to bend" or "to turn."^[7]^[8] This etymological path underscores the unit's origin in the human body's natural curvature at the elbow, emphasizing a gesture-based measure rooted in anatomical form. In ancient Near Eastern languages, the concept appears in varied forms tied to the arm. The Sumerian term was kù, referring to the forearm length as a basic linear unit.^[9] Its Akkadian counterpart, ammatu, explicitly meant "forearm" or "cubit," serving as a direct cognate that highlights the measure's bodily foundation.^[10] Similarly, the ancient Egyptian designation for the royal cubit was mḥ niswt, translating to "cubit of the king," while a common variant was mḥ, simply denoting the cubit as an arm-based span.^[11] Semitic languages further illustrate this evolution, with the Hebrew 'ammah possibly deriving from 'em ("mother"), metaphorically evoking the "mother of the arm" as the origin of measurement.^[4] The Arabic dhirāʿ originates from the Proto-Semitic root ḏarʕ- ("arm"), directly linking the term to the physical extension from elbow to fingertips. In Greek, pēchys (πήχυς) comes from Proto-Hellenic pā́kʰus, connected to the Proto-Indo-European \bʰeh₂ǵʰús, denoting the forearm's span. These linguistic roots collectively symbolize the cubit's role as a human-centered measure, embodying the body's proportions as a foundational principle in early metrology across Semitic and Indo-European traditions.^[4]

Ancient Near Eastern Cubits

Egyptian Royal Cubit

The Egyptian royal cubit served as the primary standardized unit of length in ancient Egypt, particularly for monumental architecture during the Old Kingdom (c. 2686–2181 BCE). This measure, approximately 52.3 cm (20.6 inches) in length, was derived from the forearm span from elbow to middle fingertip, with slight variations observed across artifacts ranging from 52.2 to 52.9 cm. The master standard was crafted as a rod from black granite, ensuring precision and durability for replication in construction and surveying activities.^[12] Unlike the common cubit of 6 palms (about 45 cm), the royal cubit was subdivided into 7 palms, with each palm further divided into 4 fingers, yielding a total of 28 fingers as the finest unit. This hierarchical system allowed for accurate fractional measurements, and the royal cubit rod functioned as the authoritative master standard, often inscribed with these divisions for ceremonial and practical use. Surviving examples demonstrate this uniformity, facilitating consistent application across diverse scales of work.^[13] Key artifacts include black granite cubit rods from the Old Kingdom, preserved in institutions such as the Egyptian Museum in Cairo, which confirm the standard's early establishment. A notable wooden cubit rod from the tomb of Maya, a royal treasurer under Tutankhamun (c. 1300 BCE) in Saqqara, measures precisely 52.3 cm and is housed in the Louvre Museum, Paris, illustrating continuity into the New Kingdom.^[14] The royal cubit was integral to pyramid construction, as evidenced by the Great Pyramid of Khufu at Giza (c. 2580 BCE), whose base dimensions equate to 440 royal cubits (230.6 m), underscoring its role in achieving geometric precision.^[12]^[15] The royal cubit enabled high precision in Nile Valley construction, land surveying for agriculture and flooding, and standardized trade measurements, reflecting Egypt's advanced metrological practices. Archaeological evidence includes metrological reliefs in temples, such as the Samian relief in the Ashmolean Museum (c. 460–430 BCE), which depicts and equates the Egyptian royal cubit (c. 52.3 cm) with local standards, affirming its influence and recognition beyond Egypt.^[16]

Mesopotamian and Assyrian Cubits

In ancient Sumer, the cubit formed a foundational unit within the sexagesimal measurement system, with the Nippur cubit emerging as a standardized length around 2500 BCE, measuring approximately 19.8 inches (50.3 cm). This unit was divided into 30 fingers, aligning with the base-60 numerical framework that facilitated precise calculations for architecture and administration. Artifacts from Nippur, a key Sumerian city, attest to this standard's use in early urban planning and temple construction.^[17] Babylonian metrology built upon Sumerian foundations, distinguishing between a common cubit of about 19.8 inches (50 cm) and a longer variant at roughly 20.3 inches (51.5 cm), both subdivided into 30 fingers to maintain sexagesimal compatibility. These measures gained legal significance in the Code of Hammurabi (c. 1750 BCE), where cubits defined property boundaries, field dimensions, and penalties involving spatial extents, ensuring equitable enforcement across Babylonian society. Cuneiform records from this period illustrate the cubit's role in documenting contracts and land allocations.^[18]^[19] During the Assyrian era, particularly in the late period (c. 900–612 BCE), the cubit lengthened to approximately 21.8 inches (55.4 cm), as confirmed by dimensions in palace reliefs and standardized bricks excavated at Nineveh. This adjustment reflected imperial expansions and engineering demands, with the unit retaining its 30-finger division for consistency in the sexagesimal tradition. Assyrian inscriptions and architectural remains demonstrate the cubit's integration into monumental projects, scaling ziggurats like those at Nimrud and extensive irrigation networks that sustained agriculture across the empire.^[20]^[17]

Biblical and Hebrew Cubit

Description in Biblical Texts

The cubit appears frequently in the Hebrew Bible as a standard unit of length in descriptions of sacred and monumental constructions, emphasizing divine instructions for precise dimensions. In the Torah, it is prominently featured in the blueprints for the Tabernacle, where God commands Moses to build the Ark of the Covenant at two and a half cubits in length, one and a half cubits in width, and one and a half cubits in height (Exodus 25:10), alongside specifications for the table of showbread at two cubits long, one cubit wide, and one and a half cubits high (Exodus 25:23). These measurements underscore the cubit's role in creating portable sacred spaces during the Israelites' wilderness journey, with the overall Tabernacle courtyard extending 100 cubits long on the longer sides and 50 cubits wide (Exodus 27:9-18). In the historical narratives, the cubit defines the scale of epic projects symbolizing human obedience to or ambition against divine will. Noah's Ark is described as 300 cubits long, 50 cubits wide, and 30 cubits high, portraying a vessel of salvation amid judgment that reflects proportions of stability and divine protection (Genesis 6:15). Similarly, Solomon's Temple measures 60 cubits in length, 20 cubits in width, and 30 cubits in height, embodying the grandeur of Israel's worship center as a microcosm of cosmic order (1 Kings 6:2). The rebuilding of Jerusalem's walls under Nehemiah includes sections measured in cubits, such as 1,000 cubits repaired by Hanun, highlighting restoration efforts in a narrative of communal resilience (Nehemiah 3:13). These dimensions often symbolize the interplay between human endeavor and divine scale, as seen in stories like the Tower of Babel, where unchecked building ambition challenges heavenly boundaries, though without explicit cubit notation (Genesis 11:1-9). Post-exilic prophetic literature extends the cubit's use into visionary and apocalyptic contexts, particularly in Ezekiel's detailed temple visions from the 6th century BCE, where a measuring reed of six cubits gauges walls, gates, and chambers to depict an idealized future sanctuary (Ezekiel 40:5). For instance, the temple's outer wall stands one reed (six cubits) thick, and inner spaces like the altar base measure two cubits high, evoking themes of restoration and purity after Babylonian exile (Ezekiel 43:13-14). The cubit here serves in prophetic symbolism, representing divine geometry that reconciles human imperfection with eschatological harmony. This usage draws from inherited Near Eastern traditions of standardized measures in monumental architecture, adapted to convey theological depth in biblical texts.^[4]

Measurements and Interpretations

Scholars have proposed that the common Hebrew cubit measured approximately 17.5 inches (44.5 cm), based on the Siloam inscription from around 700 BCE, which describes a water tunnel as 1200 cubits long, aligning with a modern measurement of 533.31 meters.^[4] This estimation derives from dividing the tunnel's verified length by the inscribed cubit count, providing one of the most direct archaeological calibrations for the everyday biblical cubit.^[21] In contrast, the royal cubit is estimated at 20.4 inches (51.8 cm), a longer variant frequently linked to monumental or temple architecture in biblical descriptions.^[22] Interpretations of these cubits often distinguish the shorter common cubit for profane, daily measurements from the longer royal cubit reserved for sacred or official purposes, reflecting a dual system in ancient Israelite metrology.^[4] This duality is thought to stem from Egyptian influence, as the royal cubit's length closely resembles the Egyptian royal cubit of about 20.6 inches (52.3 cm), potentially transmitted through the Exodus narrative where Israelites adopted Nile Valley standards during their sojourn.^[23] Archaeological evidence from sites like Qumran supports these measurements, where the Copper Scroll references distances such as 40 cubits (approximately 64 feet, based on a cubit of about 19.2 inches), aligning with physical remnants measured at 767.71 inches.^[24] Similarly, the Gezer calendar and associated structures from the Solomonic period feature alignments that match multiples of the royal cubit, such as an 4.2-meter span equating to eight royal cubits of 0.525 meters each.^[23] Debates persist regarding the Ark of Noah's dimensions in Genesis 6:15 (300 by 50 by 30 cubits), with some scholars exploring whether the 6:1 length-to-width ratio approximates circular proportions involving pi, though most interpretations affirm a rectangular design without explicit mathematical intent.^[25] Modern scholarship, particularly from the 19th and 20th centuries, has grappled with these lengths through analyses like those of Flinders Petrie, who in his inductive metrology studies compared biblical cubits to Egyptian artifacts, confirming the royal variant's prevalence in sacred contexts while noting slight regional variations of up to 0.5 inches. Uncertainties arise from textual transmission, as variants in manuscripts like the Qumran scrolls (e.g., differing heights in 1 Samuel 17:4) suggest potential scribal adjustments or metrological ambiguities across copies, complicating precise conversions without additional epigraphic evidence.^[26]

Classical Mediterranean Cubits

Greek Cubit

The Greek cubit, termed pechys (πῆχυς), represented the length from the elbow to the tip of the middle finger and served as a core unit in Hellenistic metrology, typically measuring 46.2 cm (18.2 inches).^[27] This unit derived from earlier Near Eastern traditions but adapted to local standards, with 24 fingers (daktyloi) equaling one pechys.^[28] Regional variations existed, as the cubit aligned with the local foot (pous); the Attic cubit, based on a foot of approximately 29.6 cm, measured about 44.4 cm, while the Ionian cubit, using a longer foot of around 32.5 cm, extended to roughly 48.7 cm. Philosophers integrated the cubit into discussions of measurement and nature. Herodotus (c. 484–425 BCE), in his Histories, compared the Greek cubit to the Egyptian royal cubit, observing that the latter surpassed the Samian (Ionian) cubit by three fingers, or about 5.4 cm, highlighting cross-cultural metrological exchanges.^[29] Aristotle, in works like Physics and Categories, referenced the cubit as an exemplar of discrete quantity and spatial extension, using phrases such as "two cubits long" to explore motion, change, and the measurement of natural phenomena.^[30] In architecture, the pechys intertwined with the foot and stade (stadion) for proportional design, evident in the Parthenon (c. 447 BCE), where stylobate dimensions of approximately 69.5 m by 30.9 m equated to multiples of the Attic foot, with the cubit facilitating modular scaling in column spacing and entablature heights.^[31] Hippodamus of Miletus (c. 498–408 BCE) employed these units in grid-based city planning, as seen in orthogonal layouts at Piraeus and Rhodes, where blocks were dimensioned in feet and cubits to ensure harmonic urban symmetry.^[32] Specialized variants included the Olympic cubit, standardized at 24 fingers (about 46.3 cm) for athletic facilities and games at Olympia, promoting uniformity in track and event measurements.^[33] Artifacts from Delian League sites, such as standardized rods and inscriptions from Delos (c. 478–404 BCE), attest to attempts at metrological consistency across allied city-states for trade and construction.^[34]

Roman Cubit

The Roman cubit, known as the cubitus, served as a key unit in the empire's metrological system, equivalent to 1.5 Roman feet (pedes) and measuring approximately 17.5 inches (44.4 cm).^[27] This length, derived from the forearm from elbow to middle fingertip, was standardized during the Roman Republic (c. 509–27 BCE) to ensure consistency in construction and trade across expanding territories.^[35] Influenced briefly by Greek metrology, the Roman cubit adapted earlier Hellenistic standards for practical imperial use.^[36] In legal contexts, standardized units played a role in property regulations, particularly for land division as outlined in the Twelve Tables (c. 450 BCE), Rome's earliest codified laws that established equitable boundaries and inheritance rights using such units to prevent disputes.^[37] The architect Vitruvius, in his treatise De Architectura (c. 15 BCE), emphasized the cubit's importance in proportional design, recommending its use for temple and public building dimensions to achieve harmonic symmetry based on human-scale modules. These guidelines integrated the cubit into civic planning, ensuring measurements aligned with legal standards for urban development. Engineering applications highlighted the cubit's utility in large-scale projects, where it facilitated precise scaling alongside subdivisions like the uncia (1/12 of the foot, or about 2.5 cm). Roman aqueducts, such as the Pont du Gard (c. 19 BCE), employed foot-based alignments for gradient control (with the cubit equivalent to 1.5 feet), with channel widths and arch spans calculated in multiples of the foot to maintain water flow over distances exceeding 50 km.^[38] Similarly, the Colosseum's arena (c. 70–80 CE) featured dimensions convertible to cubits, including a major axis of approximately 188 meters (equivalent to about 423 Roman cubits), allowing masons to use the unit for stone block placement and overall structural integrity.^[39] Under Emperor Augustus (r. 27 BCE–14 CE), variations in provincial measurements were adjusted for empire-wide uniformity, with the cubit recalibrated against the standardized Roman foot to support consistent taxation, road building, and military logistics across diverse regions.^[40] This reform minimized discrepancies inherited from republican-era local practices, reinforcing the cubit's role as a unifying tool in imperial administration.^[41]

Medieval and Islamic Cubits

Islamic Cubit Systems

The Islamic cubit, known as the dhira' (ذراع), emerged as a core unit of length in Islamic metrology from the 7th century CE onward, rooted in pre-Islamic Arabian traditions and adapted for religious, architectural, and scientific purposes across the caliphates. Drawing briefly from Roman and biblical legacies adopted in early Islamic contexts, the dhira' was typically defined as the distance from the elbow to the tip of the middle finger, reflecting a bodily measure emphasized in prophetic traditions attributed to Muhammad.^[42]^[43] During the Abbasid era (c. 750–1258 CE), this unit was refined to approximately 50 cm (19.7 inches), serving as a standard for daily and imperial applications while honoring the Prophet's cubit as a foundational reference.^[44] Standardization efforts peaked under Caliph al-Ma'mun (r. 813–833 CE), whose metrological reforms established the "black cubit" (dhira' sawda') as a national benchmark, measured at around 54 cm and used for official surveys and trade. Al-Ma'mun commissioned astronomers and scholars in Baghdad to calibrate this unit precisely, including through expeditions that measured Earth's meridian in cubits, promoting uniformity across the empire. Cubit rods, inscribed with divisions for practical verification, were integral to these initiatives at the House of Wisdom (Bayt al-Hikma), where interdisciplinary work integrated metrology with astronomy and engineering.^[45]^[46] In practical applications, the dhira' guided mosque and palace architecture, ensuring proportional harmony in designs. Similarly, it informed religious artifacts. These uses underscored the cubit's role in blending utility with sacred geometry.^[47] Scholarly treatises further embedded the dhira' in broader systems, as seen in Muhammad ibn Musa al-Khwarizmi's (c. 780–850 CE) geographical and astronomical works, which integrated cubit-based calculations with the Arabic mile (defined as 4,000 cubits) to map distances and compute spherical Earth models. Al-Khwarizmi's tables and algorithms, developed amid Abbasid patronage, converted cubit measurements into miles for navigation and surveying, influencing subsequent Islamic science.^[48]

European Medieval Variations

In medieval Europe, the cubit persisted as a practical unit of length derived from the human arm, but regional variations emerged due to local customs and influences. The English cubit measured 18 inches (45.7 cm) and was used in administrative records and trade alongside other body-based measures.^[49]^[50] In France, the cubit extended to approximately 20.9 inches (53 cm), reflecting adaptations in northern European trade contexts that aligned with longer ell variants for fabric and construction. These differences highlight the cubit's flexibility, often calibrated against local standards like the foot or palm to accommodate diverse applications across feudal territories. The cubit played a key role in medieval guilds, particularly for trade in cloth and building projects, where it provided a straightforward, body-referenced measure for artisans. Cloth merchants in English and French guilds used the cubit or its extension, the ell (typically 45 inches in England, linking directly to the cubit as two cubits plus a handspan), to standardize bolt lengths and widths, ensuring fair exchange in markets from London to Paris.^[4] In architecture, masons at sites like Chartres Cathedral (constructed c. 1194–1250 CE) employed a modular cubit of about 29 inches—effectively a double cubit—for laying out proportions in stonework, vaults, and nave dimensions, integrating it with geometric tools for structural harmony.^[51] Guild regulations enforced these measures to maintain quality and prevent disputes, underscoring the cubit's utility in the collaborative craft economy of the High Middle Ages. The cubit's prominence waned from the 14th to 16th centuries as centralized monarchies imposed royal standards based on the foot, promoting uniformity for taxation and commerce. Evidence from the Magna Carta of 1215 CE, which mandated consistent measures for wine, ale, corn, and dyed cloth (implicitly encompassing cubit-derived ells), marked an early push toward standardization that accelerated this shift.^[52] By the late medieval period, royal decrees in England and France prioritized the foot—defined variably but often around 12 inches—over the variable cubit, leading to its gradual obsolescence in official use.^[53] Regionally, the Byzantine cubit, approximately 18.2 inches and rooted in Greco-Roman traditions, exerted influence on Eastern European practices through trade routes and Orthodox church architecture, blending with local Slavic variants.^[54] Islamic cubit systems encountered during the Crusades occasionally informed Western adaptations in shared Mediterranean ports.^[55]

Other Historical and Symbolic Uses

Cubit in Heraldry

In heraldry, the cubit arm is a charge representing the forearm and hand, couped at the elbow, often depicted in a bent or erect position.^[56] This emblem, appearing in European armorials from the 13th century CE, symbolizes physical strength and readiness for action, while also evoking the ancient cubit as a unit of measure in lineages tied to metrology or craftsmanship.^[57] Examples of the cubit arm abound in English heraldry, such as the Tremayne family's arms: Gules, three dexter arms couped at the elbow in fess proper.^[58] The Cubitt family, whose surname derives from the cubit, features in its crest an embowed arm in armour, the hand proper grasping and throwing an arrow, underscoring themes of precision and force.^[59] Scottish variants often include additional details like sleeves or vesting for distinction; for instance, the Henderson clan's crest depicts a cubit arm proper, the hand holding an estoile or surmounted by a crescent azure, while the Shaw clan's shows a dexter cubit arm couped, holding a dagger erect, all proper.^[60]^[61] The symbolism of the cubit arm extends to noble lineages, where it represents not only martial prowess but also a nod to historical measurement standards, particularly in families with occupational ties to building or trade. This interpretation was formalized in 19th-century heraldic compendia like Burke's Peerage, which codified the charge's blazoning and placement rules to maintain consistency across armorial bearings.^[56] Artistically, cubit arms appear in medieval rolls of arms, such as those cataloged in the Ordinary of Medieval Armorials, typically shown erect or fesswise with the hand grasping an object to denote action.^[62] By the Renaissance, depictions evolved to incorporate gauntlets and armored elements, reflecting contemporary military attire and enhancing the charge's dynamic expression of strength.^[63]

Modern Archaeological and Metric Equivalents

Modern archaeologists utilize advanced technologies like 3D scanning and photogrammetry to precisely document ancient cubit rods, surpassing the limitations of 20th-century manual measurements and enabling non-invasive analysis of wear and inscriptions. A notable example is the 2008 ISPRS study of the Nippur cubit rod, a copper artifact dating to circa 2650 BCE from Mesopotamia, which employed close-range photogrammetry to create a high-resolution 3D model revealing its 30 kus divisions with sub-millimeter accuracy.^[64] In the 2020s, similar techniques have been applied to ancient Egyptian artifacts, where laser scanning facilitates detailed metrological studies to assess material degradation and original calibrations.^[65] Standardized metric equivalents for historical cubits have been derived from these artifact analyses, providing benchmarks for cross-cultural comparisons. The Egyptian royal cubit, based on surviving granite and wooden rods, measures approximately 0.523 meters, as confirmed by examinations of large-scale vessels and architectural alignments.^[66] For the biblical or Hebrew cubit prevalent in Iron Age contexts, recent scholarly assessments propose 0.54 meters, derived from measurements of Canaanite and Israelite structures, resolving ambiguities in textual descriptions like those in Ezekiel.^[67] In contemporary biblical archaeology, these equivalents inform site interpretations, such as in ongoing excavations at Iron Age sites to align findings with biblical narratives. Digital simulations further enhance understanding by modeling pyramid scaling with cubit-based proportions; for instance, reconstructions of the Great Pyramid demonstrate construction precision where base deviations are under 6 centimeters across 230 meters, validating the royal cubit's role in geometric accuracy.^[68]

References

[1]
The Egyptian Cubit: The Birth of Calibration - HBK
A cubit is an ancient measurement of lenght. While the common cubit was the length of the forearm from the elbow to the tip of the middle finger – usually ...Missing: definition | Show results with:definition
[2]
From the Noggin to the Butt: Quirky Measurement Units Throughout ...
Mar 30, 2022 · At the dawn of recorded history, the Egyptians and other ancient cultures based the cubit on the distance from the elbow to the end of the ...
[3]
For Good Measure. - Web Physics
The Egyptian cubit was defined as the length between the elbow and the fingertips of (someone's) arm. Most early length units were based on the size of human ...
[4]
The Cubit: A History and Measurement Commentary - Stone - 2014
Jan 30, 2014 · The cubit is based upon a human characteristic—the length of the forearm from the tip of the middle finger to end of the elbow. Many definitions ...Abstract · Introduction · Greek and Roman Comparisons · The Human Cubit
[5]
[PDF] units and systems of weights and measures their origin ... - GovInfo
somewhat sketchily the story about a few units. Units of length: The cubit was the firstrecorded unit used by ancient peoples to measure length. There were ...
[6]
https://www.hindawi.com/journals/janthro/2014/489757/
[7]
Cubit - Etymology, Origin & Meaning
Originating from Latin cubitum, meaning "elbow, forearm," the cubit is an ancient unit of measure (18-22 inches) based on the forearm's length.
[8]
cubit - Wiktionary, the free dictionary
Etymology. edit. From Middle English cubite, from Latin cubitum (“elbow ... These may be clarified with a preceding adjective: Greek cubit, Roman cubit, etc.
[9]
[PDF] Which cubit for Noah's Ark? - Creation Ministries International
cubits. A copper standard dated around 1950 BC was unearthed at Nippur defining a Sumerian cubit (kù) of 518.5 mm. The general picture is that cubits ...Missing: ku- | Show results with:ku-
[10]
ammatu - Search Entry
ammatu [KÙŠ : ] (n. fem.) [Human → Body]. forearm, kiṣir ammati elbow ; cubit (Measure), ammatu ṣeḫertu small cubit, ammatu rabītu big cubit, ...Missing: word amatu
[11]
Determining the Length of the Royal Cubit - Academia.edu
... ancient Egyptian Royal “Original” Cubit ( mḥ niswt). The royal cubit could be considered anthropometric – i.e., a unit of measurement based upon lengths of ...
[12]
https://www.bksv.com/en/knowledge/blog/perspectives/egyptian-cubit
[13]
Royal cubit rod of Amenemope - Egypt Museum
There were two measurements for the Egyptian cubit: the “small” cubit of 6 palms (about 45 cm) and the “regal” cubit of 7 palms (about 52.50 cm). The one in the ...Missing: black | Show results with:black
[14]
Survey and the alignment of the Khufu pyramid - ancient Egyptian ...
The ancient Egyptians used cubits, palms and fingers as units for measuring. The cubit was divided into 7 palms and a palm into 4 fingers which resulted in 28 ...
[15]
Doric Foot and Metrological Implications of the Ancient Theatre of ...
Aug 19, 2022 · The dimensions of its sculptures indicate a unit length of 523 mm, equal to the royal cubit of Egypt, and on this evidence, it is assumed that ...
[16]
Overview of Metrological Systems - Oracc
1 finger, 17 mm. 1 cubit = 30 fingers, 0.5 m. 1 half-reed (later: pace) = 3 cubits, 1.5 m. 1 reed = 6 cubits, 3 m. 1 rod = 12 cubits, 6 m. 1 chain = 1 00 cubits ...
[17]
[PDF] The Code of Hammurabi, King of Babylon, about 2250 B.C.
... Measures.) Gift, deeds of gift, 150, 178-183. Page 144. 124. The Code op ... cubit; 1 cubit= 498 millimeters or 19% inches. KA = 1 liter, nearly. (about ...
[18]
[PDF] Counting in Cuneiform - Mathematical Association
1 finger - 5/3 cm. 30 fingers = 1 cubit - 50 cm. 12 cubits = 1 rod - 6 m. 60 rods = 1 chain - 360 m. 30 chains = 1 stage - 10.8 km. Weight. 1 barleycorn - 45 mg.
[19]
Sargonid sculpture and the late Assyrian cubit | IRAQ
Aug 7, 2014 · A slab featuring King Sargon was carved to a cubit 55 cms in length, precisely two finger-breadths longer than the standard. This confirms ...
[20]
The Hebrew Cubit - jstor
3I The same dimensions might represent a cylinder, but in this case it is impossible; a bowl-shaped vessel is required to leave room for the foreparts of the ...
[21]
King Solomon's Molten Sea and (π) - jstor
does not directly indicate which cubit was used, the royal or temple cubit of. 51.8 cm (20.4 inches), or the common cubit of 44.4 cm (17.5 inches). The ...
[22]
Solomonic Cubits | ArmstrongInstitute.org
There are two primary cubits: one “long” and one “short.” The “short cubit” is generally explained as the distance from elbow to tip of the middle finger, ...
[23]
2,000 Year-Old Copper Scrolls Might Reveal Ancient Temple ...
... Qumran, which measure 39.98 cubits (767.71 inches or 1,949.98 cm). That's pretty close to 40 cubits (768 inches or 1,950.72 cm), which is mentioned in the ...
[24]
[PDF] Do Scripture and Mathematics Agree on the Number π?
Mar 1, 2009 · The five parts of this paper discuss the seeming contradiction between scripture and mathematics concerning the value of π (pi),.
[25]
[PDF] Goliath's Height by William D. Barrick, Th.D. - DrBarrick.org
It is true that a Dead Sea Scroll document (4QSam-b) has 4 cubits and a span (approx. equivalent to 6.5 feet) for Goliath's height, while 1 Samuel 17:4 ...
[26]
Ancient units of measurement | Ancient Ports - Ports Antiques
one Greek cubit, pechos: 0.462 m, a Roman cubit is 0.444 m (24 fingers, 1.5 feet), but an Egyptian royal cubit is 0.525 m (28 fingers, 7/4 of a foot)Missing: pechys inches cm variations city- Attic
[27]
(DOC) A Dictionary of Units of Measurement - Academia.edu
There were 16 daktylos in the pous, the Greek foot, and 24 in a pechys (cubit). This unit was the Greek predecessor of the Roman digit (see below). dal or ...<|separator|>
[28]
[PDF] Siegecraft: Two Tenth-Century Instructional Manuals by "Heron of ...
Aug 3, 2000 · pous>, the pous two-thirds of the pechys. Thus 60 pecheis of the height and 17 of the length of the base will have the same pro- portion in ...
[29]
Egyptians: Herodotos on customs and legendary kings (fifth century ...
Jul 12, 2022 · [Comparison of Egyptian and Greek customs with regard to phalluses] ... This acre is a square of a hundred Egyptian cubits each way, the Egyptian ...
[30]
Aristotle, Number and Time - jstor
A cubit is a unit of measure of length by means of which the whole length of an item is measured. So a specified period of time, like an hour, would be a unit ...
[31]
The Dimensions of the Athena Parthenos - jstor
8.92 m. But 8.92 m. equals 30.15 Greek feet of 0.296 m. stature of the Athena Parthenos.
[32]
[PDF] The First Urban Planning, Amarna - Athens Journal
Jan 21, 2025 · It is the first housing study in history. The measurement unit varies: royal cubits (Amarna), Egyptian cubits (Egypt), but the pattern or module ...
[33]
Olympic cubit | ancient Greek unit of measurement - Britannica
In measurement system: Greeks and Romans …and 24 fingers equaled 1 Olympic cubit. The coincidence with the Egyptian 24 digits equaling 1 small cubit ...
[34]
[PDF] the complete fragments of ctesias of cnidus - ATTALUS
They have a horn in the middle of their brow one and a half cubits in length. The bottom part of the horn for as much as two palms towards the brow is ...
[35]
None
Nothing is retrieved...<|separator|>
[36]
Cubit | Ancient, Length, Unit | Britannica
Sep 12, 2025 · Cubit, unit of linear measure used by many ancient and medieval peoples. It may have originated in Egypt about 3000 bc; it thereafter became ubiquitous in the ...
[37]
The Twelve Tables - The Avalon Project
Tradition tells us that the code was composed by a commission, first of ten and then of twelve men, in 451-450 BC, was ratifed by the Centuriate Assembly in ...
[38]
Ancient Roman units of measurement - Wikipedia
Length ; pes (plural: pedes), (Roman) foot, 1 pes ; palmipes, foot and a palm, 1+1⁄4 pedes ; cubitum, cubit, 1+1⁄2 pedes ; gradus pes sestertius, step, 2+1⁄2 pedes ...
[39]
Nimes (France) - Nîmes 3 Pont du Gard - Roman Aqueducts
The Pont du Gard is the largest and most harmonious aqueduct bridge in the world, nearly 50 metres high and 350 metres long, with arches up to nearly 25 m wide ...
[40]
Explore the Architecture of the Colosseum (Design & Structure)
It measured 83 meters in length by 48 meters width. · The arena floor was made of wood panels, covered with a layer of sand which was drawn from the nearby Monte ...Missing: cubit | Show results with:cubit
[41]
2. Area measurement - Mostre - Museo Galileo
One of the reforms implemented by the Emperor Augustus (27 BC – 14 AD) was the unification of local measurements with those in use in Rome.
[42]
Roman Weights and Measures – Lucius'€™ Romans - Blogs at Kent
Dec 13, 2017 · By the time of Augustus, a new system of weights and measures was rolled out Empire wide to create a new standard. That meant that from ...
[43]
Islamic Distances: Understanding Them Easily - Al-Nujum Institute
Dhirāʿ (الذراع) The distance between the elbow and the middle finger. It is an ancient unit of length called cubit. According to ḥanafiyyah: 46.375cm.
[44]
Pillars Of Hercules, Sea Of Darkness - Saudi Aramco World
For surveying purposes, al-Ma'mun introduced another cubit, equivalent to 48.25 centimeters (19 inches). Finally, there is the "black cubit," the standard for ...
[45]
Iraq | The Oxford Handbook of Islamic Archaeology
The cubit (ar. dhira‛), though with many variants, is approximately equal to 50 centimeters. 3. According to Whitehouse and Williamson (1973), maritime trade ...2.3 Iraq · Southern Iraq And The... · Baghdad And The Abbasids
[46]
(PDF) Arabic Measures-3 - Academia.edu
This article investigates the contributions of Arabic geodesy and metrology, particularly in relation to Al Biruni's calculations on the Earth's radius.
[47]
[PDF] 8 · Geodesy - The University of Chicago Press
The "black" cubit is again referred to by al-BIruni in the Kitab al-tafhim, "Each mile is a third of a farsakh, or. 4,000 cubits, called black in Iraq, each ...
[48]
The Structure and Function of Ancient Metrology - Academia.edu
This nilometer had been rebuilt by Al Farghani for Al Mamun's successor in 861 AD using the cubit that had been adopted by Al Mamun as the national standard. Al ...
[49]
Arabic mile - Wikipedia
Al-Ma'mun's arc measurement With Firuzabadi in his famous dictionary saying that a mile equals 3000 old dhira (ie cubit) this makes the dhira about 0.5556647 ...<|control11|><|separator|>
[50]
[PDF] Al-Biruni and the Mathematical Geography - HAL
Aug 7, 2019 · Carlo Alfonso Nallino, an Italian orientalist, considered the black cubit made of 24 digits and equal, in average, to 0.4933 m; therefore ...
[51]
Glossary of Ancient Weights and Measures - Hemyock Castle
Length of (large) man's foot. Cubit: 2 spans, 28 digits. Elbow to middle finger tip. Approx. 18 inches. Military pace:.Missing: source | Show results with:source
[52]
Domesday Book - The National Archives
Domesday Book is the oldest government record held in The National Archives. In fact there are two Domesday Books – Little Domesday and Great Domesday.
[53]
"The Distance of a Bowshot": Some Remarks on Measurement ... - jstor
limeters [20.9 inches]), also called the Babylonian cubit. These systems were inherited by the Hittites, Assyrians, Phoenicians，and. Hebrews, and they were ...
[54]
Esoteric Teachings in Catholic Cathedrals
Chartres's cubit is 0.738 metres. It is the hundred thousandth part of the degree of the parallel of latitude at Chartres, which corresponds to 48° 26' 53 ...Missing: construction | Show results with:construction
[55]
Magna Carta, 1215 - The National Archives
(35) There shall be standard measures of wine, ale, and corn (the London quarter), throughout the kingdom. There shall also be a standard width of dyed ...
[56]
Medieval Weights and Measures | A Writer's Perspective
Dec 3, 2017 · These are the most common medieval weights and measures: Distance Furlong – the length of a furrow of a field ploughed by a team of eight oxen.Missing: Byzantine cubit 18.2 influence
[57]
The history of measurement - MacTutor - University of St Andrews
This article looks at the problems surrounding systems of measurement which grew up over many centuries, and looks at the introduction of the metric system.Missing: Byzantine 18.2<|separator|>
[58]
The Cubit: A History and Measurement Commentary | Quality Digest
May 16, 2018 · The long cubit is given as approximately 52.5 cm and the short cubit as about 45 cm. ... He argues for the earliest unit, the Nippur cubit, to be ...
[59]
cap of maintenance or dignity - Burke's Peerage
cubit arm an arm with the hand attached couped at the elbow cuisses armour covering the thighs and knees cygnet a young swan. A · B · C · D · E · F · G · H · I ...
[60]
Arm - Traceable Heraldic Art
Cubit Arm §. A human arm. The cubit arm is cut off at the elbow. Default alignment: dexter arm, hand to chief, fingers clenched ...
[61]
Arm - DrawShield
When couped at the elbow, it is called a cubit-arm. When armed the metal-plates for the elbow are termed brassarts. TREMAYNE. Gules, three dexter arms ...
[62]
The Cubit or Cubitt Family Crest
Family: Cubit or Cubitt ; Blazon: An Arm In Armour Embowed, The Hand Throwing An Arrow Ppr. ; Source: Fairbairn's Book of Crests, 1905 ed.
[63]
Henderson Crest & Coats of Arms - GB ScotClans
Henderson Clan Crest. Crest Description: A cubit arm Proper the hand holding an estoile Or surmounted by a crescent Azure ...Missing: example | Show results with:example
[64]
Shaw Crest & Coats of Arms - Tartan Shop
Shaw Clan Crest: Crest Description: A dexter cubit arm couped and holding a dagger erect, all Proper. Shaw Coats of Arms:
[65]
[PDF] ORDINARY of MEDIEVAL ARMORIALS
-: cubit arm = lower arm and fist = Unterarm = underarm og knytnæve. 461. 558 arm holding sword bras tenant épée. Arm mit Schwert. DEF: ærmeklædt arm, der ...<|control11|><|separator|>
[66]
A GLOSSARY OF TERMS USED IN HERALDRY by JAMES PARKER
Arms in heraldry signify the Armorial bearings(fr. Armoiries), and strictly speaking the term is applied only to those borne upon the shield. Crests, badges, ...
[67]
[PDF] NIPPUR CUBIT ROD
Nippur cubit measure, since the Egyptians, at the beginning of the 3rd millennium BC, shared the old Sumerian Nippur measure of 30 digits into 28 digits ...
[68]
Heritage preservation | Professional 3D scanning solutions - Artec 3D
Artec 3D scanners help you meld art, science, and innovation into precise 3D replicas of the world's most treasured artifacts, structures, and sites.
[69]
An Ancient Relation between Units of Length and Volume Based on ...
Mar 28, 2012 · When considered in ancient Egyptian units, the volume of a sphere, whose circumference is one royal cubit, equals half a hekat.
[70]
The biblical warrior Goliath may not have been so giant after all
Nov 23, 2020 · Archaeologists have long known that in ancient Egypt a cubit corresponded to 52.5 centimeters and assumed that the same measure was used at Gath ...
[71]
Message from Ms Audrey Azoulay, Director-General of UNESCO, on ...
May 20, 2025 · From meticulously preserving documentary heritage to accurately monitoring disaster risk at UNESCO world heritage sites, precise metrological ...
[72]
tel-dan-excavations: HOME
This is the official site for the renewed archaeological excavations of the ancient site of Tel Dan in northern Israel. ... Hebrew Union College, Jerusalem.Missing: 2023 cubit
[73]
The Math Behind Ancient Egypt's Most Enduring Architectural Designs
Oct 27, 2025 · Digital modeling reveals the extraordinary precision of Egyptian work—the base of the Great Pyramid varies from perfect level by less than ...
[74]
Shrinkage and density of archeological pine wood from 17th century ...
Mar 16, 2020 · The condition of the wood was varied. This wood was characterized by high initial humidity, high longitudinal contractions and low density after ...