Fact-checked by Grok 2 weeks ago

Exhaust gas recirculation

Exhaust gas recirculation (EGR) is an emissions control technology employed in internal combustion engines to reduce nitrogen oxide (NOx) emissions by routing a controlled portion of exhaust gases back into the engine's intake manifold, where it mixes with incoming air prior to combustion.^[1] This process dilutes the oxygen concentration in the combustion chamber and elevates the specific heat capacity of the charge, resulting in lower peak flame temperatures that suppress the thermal formation of NOx, a primary pollutant formed under high-temperature, oxygen-rich conditions.^[1] EGR systems, available in configurations such as high-pressure loop (post-turbocharger exhaust to pre-compressor intake) and low-pressure loop (post-aftertreatment exhaust to post-compressor intake), often incorporate cooling to enhance effectiveness by further reducing intake charge temperature, enabling higher recirculation rates of 15-30% without excessive power loss.^[1] Initially reported in the 1940s, EGR gained widespread adoption in gasoline engines during the 1970s to comply with U.S. Clean Air Act regulations and later in diesel engines from the 1990s onward to meet Euro 3/4 and U.S. 2007 standards, achieving NOx reductions from levels like 1 g/bhp-hr to 0.2 g/bhp-hr when combined with aftertreatment like selective catalytic reduction.^[1]^[2] While EGR has proven instrumental in enabling engines to satisfy stringent global emission norms, including Euro 6 and IMO Tier III, it introduces trade-offs such as increased particulate matter, hydrocarbons, and carbon monoxide emissions, higher fuel consumption, and potential engine durability challenges from soot accumulation and thermal fatigue in components like EGR valves and coolers.^[1]^[3] These limitations have prompted hybrid approaches integrating EGR with other technologies, though diagnostic complexities and reliability issues, such as valve malfunctions, persist in modern applications.^[4]

History

Early Development and Invention

The concept of exhaust gas recirculation (EGR) emerged in the mid-20th century as an engineering approach to mitigate combustion instabilities in internal combustion engines, particularly by diluting the intake charge with inert exhaust gases to control peak flame temperatures. This thermodynamic strategy addressed detonation, or knock, in high-compression gasoline engines, where excessive heat from compression could trigger premature autoignition of the air-fuel mixture. By introducing recirculated exhaust—primarily composed of triatomic gases like CO₂ and H₂O with higher specific heat capacities than air—the effective compression ratio for combustion is reduced, absorbing heat and lowering end-gas temperatures to prevent uncontrolled ignition.^[1] Early rationale focused on enabling higher compression ratios for thermal efficiency gains without mechanical detonation damage, predating widespread emissions concerns.^[5] Initial experimental validation occurred in the late 1950s, with engine tests demonstrating EGR's capacity to suppress knock through oxygen displacement and thermal dilution, allowing advanced spark timing and sustained power output under load.^[1] Reports of NOx emission reductions via similar temperature-lowering effects date to 1940, as documented by Berger et al., though primary motivations at the time centered on combustion stability rather than atmospheric pollutants.^[1] These findings built on first-principles understanding of charge dilution, where 10-20% EGR rates could extend ignition delay periods, corroborated by empirical pressure-volume traces showing damped pressure spikes indicative of knock.^[6] In the 1960s, limited prototypes of EGR-equipped gasoline engines explored voluntary applications for part-load efficiency, independent of regulatory pressures. Tests revealed modest fuel consumption reductions of 2-5% at throttled conditions, attributed to minimized pumping losses from reduced intake vacuum, alongside improved knock tolerance permitting leaner calibrations.^[1] Adoption remained experimental, confined to research engines due to challenges in consistent metering and potential power dilution at wide-open throttle, with no broad commercialization until later decades.^[1]

Regulatory Adoption and Widespread Implementation

The 1970 Clean Air Act Amendments in the United States established national ambient air quality standards and required a 90% reduction in automobile emissions of hydrocarbons, carbon monoxide, and nitrogen oxides (NOx) by 1975, prompting the Environmental Protection Agency (EPA) to mandate exhaust gas recirculation (EGR) as a primary technology for NOx control in gasoline engines starting with 1973 model-year vehicles.^[7]^[8] EGR valves were developed and integrated alongside other measures like retarded spark timing to meet these NOx limits, transforming EGR from an experimental efficiency aid into a federally required emissions control despite its known trade-offs, including reduced fuel economy and power output.^[7] Adoption expanded to diesel engines in the late 1970s for select heavy-duty applications, such as naturally aspirated models like the Caterpillar 3208, to comply with emerging NOx regulations, but widespread implementation occurred in the 1990s amid tightening standards.^[1] In Europe, Euro 1 standards effective January 1992 imposed NOx limits of 0.62 g/km for light-duty diesels, accelerating EGR deployment often in cooled configurations to balance emissions reductions with engine durability, even as efficiency penalties—typically 2-5% fuel consumption increases—were acknowledged in regulatory analyses.^[9]^[1] Similarly, U.S. heavy-duty diesel rules under the 1990 Clean Air Act Amendments drove EGR integration by the mid-1990s, with further proliferation for 2004 standards requiring cooled EGR combined with oxidation catalysts to achieve 2.0 g/bhp-hr NOx caps.^[10] Globally, the United Nations Economic Commission for Europe (UNECE) facilitated harmonization through regulations like those underpinning Euro standards, influencing adoption in regions such as Asia and adopting markets via World Harmonized standards, where EGR became integral to NOx compliance pathways.^[11]^[12] Compliance costs escalated from rudimentary EGR valves costing under $50 per vehicle in the 1970s to several thousand dollars by the 2000s for advanced cooled systems with electronic controls and integration, reflecting added complexity for meeting progressively stringent NOx targets like Euro 4 (0.25 g/km) and U.S. 2010 heavy-duty levels (0.2 g/bhp-hr).^[8]^[13] These mandates prioritized NOx abatement over efficiency losses, with empirical data showing EGR enabling 50-90% in-cylinder NOx reductions but necessitating compensatory turbocharging or aftertreatment in later eras.^[1]

Evolution in Response to Stricter Emissions Standards

To meet the ultra-low NOx limits of Euro 4 standards implemented in 2005 for light-duty diesels, engine manufacturers widely adopted cooled EGR systems, which lowered recirculated exhaust temperatures from over 500°C to around 150-200°C to enhance NOx suppression while mitigating knock and thermal stresses. This shift, building on earlier heavy-duty applications for US 2004 standards, involved EGR coolers using engine coolant or air-to-air exchangers, enabling higher EGR fractions without excessive charge dilution. However, cooling introduced condensation risks, as exhaust water vapor and sulfuric acids formed deposits on cooler surfaces, increasing pressure drop and fouling rates by up to 20-30% in field tests, necessitating advanced materials like stainless steel and periodic cleaning protocols.^[1]^[14]^[15] Stricter Euro 6 (2014) and US Tier 4 (2010-2014) regulations, targeting NOx below 0.4 g/kWh and 0.2 g/bhp-hr respectively, drove escalation to high EGR rates of 20-50% in diesel engines, particularly heavy-duty variants, to precondition combustion for engine-out NOx reductions of 50-70% before aftertreatment. These rates displaced more intake oxygen, slowing flame speeds and requiring retarded injection timing, which empirical engine dyno and fleet data linked to brake specific fuel consumption (BSFC) penalties of 3-7%, though optimized controls in some designs (e.g., variable geometry turbocharging) limited losses to under 5%. Trade-offs amplified soot production, elevating particulate matter (PM) by 2-3 times at peak EGR, thus mandating concurrent diesel particulate filter (DPF) sizing increases.^[16]^[1] By the mid-2010s, EGR integration with DPF and selective catalytic reduction (SCR) became standard for holistic compliance, where cooled EGR lowered tailpipe NOx by synergizing with urea injection—reducing SCR reagent needs by 20-30%—but heightened system complexity through elevated exhaust backpressure (up to 10-15% rise) and accelerated DPF soot loading, complicating active regeneration cycles and contributing to reliability issues like thermal fatigue in coolers. Field durability studies on Euro VI fleets reported EGR-related downtime from fouling and valve sticking at rates 1.5-2 times higher than pre-2010 systems, prompting hybrid low/high-pressure EGR architectures to balance NOx control with durability.^[1]^[16]

Principles of Operation

Thermodynamic and Chemical Mechanisms

Exhaust gas recirculation (EGR) reduces nitrogen oxides (NOx) primarily through thermodynamic dilution of the intake charge with inert exhaust species such as CO₂, H₂O, and N₂, typically at volumetric rates of 5–30%, which lowers oxygen concentration and elevates the mixture's specific heat capacity.^[1] This displaces reactive oxygen, slows flame propagation speeds, and decreases peak combustion temperatures below levels favoring thermal NOx pathways, particularly the Zeldovich mechanism involving reactions like O + N₂ → NO + N, which accelerates significantly above 1800 K.^[1]^[17] The higher heat capacity absorbs combustion energy, further throttling temperature rise and limiting the residence time at NOx-forming conditions. Empirical combustion data from engine testing confirm these effects: a 10% EGR rate yields approximately 20–25% NOx reduction by curtailing peak temperatures, though it promotes soot precursors via oxygen scarcity inducing local fuel-rich zones that hinder oxidation.^[18] At higher rates like 20%, NOx cuts can reach 50% or more, but particulate matter often triples due to incomplete combustion. Chemical mechanisms complement dilution, as high-temperature dissociation of recirculated CO₂ (to CO + O) and H₂O (to OH + H) generates radicals that scavenge chain carriers (e.g., OH, H), quenching branching reactions and amplifying thermal suppression independent of O₂ reduction alone.^[19] Dynamometer validations show NOx emissions inversely correlated with inferred peak temperatures across EGR sweeps, with dissociation effects evident in kinetic models separating chemical from volumetric influences.^[19]^[1]

EGR System Components and Control Strategies

The EGR system features core hardware elements engineered to meter and condition exhaust gas for safe reintroduction into the combustion process. The EGR valve acts as the principal flow control device, typically positioned between the exhaust manifold and intake tract, with electric actuation predominant in contemporary designs for enabling rapid and precise adjustments via solenoid or stepper motor mechanisms.^[20] An EGR cooler, functioning as a heat exchanger—commonly employing engine coolant as the cooling medium—follows the valve to reduce gas temperatures, mitigating risks of thermal stress and deposit buildup while enhancing gas density for better mixing.^[20] ^[21] Interconnecting piping, including rigid tubes and flexible hoses, routes the gas while incorporating seals, flanges, and sometimes venturi mixers to ensure uniform distribution and minimize pressure losses.^[20] Electronic control of the EGR system is orchestrated by the engine control unit (ECU), which modulates valve position based on real-time operating parameters to balance emissions reduction with engine stability. Sensors such as manifold absolute pressure (MAP), mass air flow (MAF), exhaust backpressure (EBP), and intake temperature provide feedback, enabling closed-loop algorithms that adjust EGR flow to maintain targeted air-fuel ratios and avoid over-dilution, which could impair combustion efficiency.^[22] Control maps pre-calibrated for engine speed and load dictate EGR deployment, generally minimizing or eliminating recirculation at idle and low loads to prevent unstable idling or excessive smoke, while increasing flow at part loads where NOx formation peaks.^[22] Advanced variants incorporate features like EGR pumps or blowers for augmented flow in dedicated loops and variable-lift valve geometries for finer metering across operating regimes.^[20] However, inherent response delays in valve actuation and gas propagation through piping can lead to transient mismatches in air management, resulting in temporary spikes in emissions during acceleration or load shifts, as evidenced in dynamometer studies of turbocharged engines where optimized strategies mitigated but did not eliminate these lags.^[23] Such challenges necessitate coordinated control with other actuators, like variable geometry turbos, to achieve robust performance under varying conditions.^[22]

High-Pressure vs. Low-Pressure EGR Configurations

High-pressure exhaust gas recirculation (HP-EGR) involves diverting exhaust gases from upstream of the turbocharger to the intake manifold upstream of the compressor, leveraging the high pressure differential across the engine for rapid flow rates and responsive transient performance.^[1] This configuration, prevalent in diesel engines from the 1990s through the 2000s to meet initial NOx standards like Euro 3 and US EPA 2004, enables quick EGR activation but recirculates hotter, less diluted gases with poorer mixing homogeneity, often resulting in elevated combustion temperatures and particulate matter (PM) formation for equivalent NOx reductions.^[24] Empirical tests on Euro 6 diesels show HP-EGR incurs pumping losses and incomplete mixing, leading to 5-10% higher brake specific fuel consumption (BSFC) penalties compared to optimized alternatives at medium loads.^[25] In contrast, low-pressure EGR (LP-EGR) routes exhaust from downstream of the turbocharger and aftertreatment (e.g., diesel oxidation catalyst and particulate filter) to the intake downstream of the compressor or throttle, providing cooler, oxygen-diluted gases with superior mixing due to the lower pressure loop and integration with intake air streams.^[1] Introduced prominently in the 2010s for Euro 6 and beyond to achieve higher EGR rates without excessive backpressure, LP-EGR reduces NOx more effectively per unit recirculated—up to 20-30% better efficiency in lean-NOx trap equipped engines—while minimizing PM recirculation from cleaner post-filter exhaust, yielding net PM reductions of approximately 20% over HP-EGR in steady-state tests.^[26] Prototypes demonstrate 2-5% BSFC improvements over HP-EGR at low-to-medium loads, attributed to reduced heat capacity mismatch and enhanced charge homogeneity, though it requires auxiliary pumps for sufficient differential and exhibits delayed response during load transients.^[27] Hybrid systems, combining HP-EGR for high-load transients and LP-EGR for low-load efficiency, emerged in post-2015 engines to balance these trade-offs, enabling NOx targets below 0.5 g/kWh with minimized fuel penalties across cycles.^[28] However, hybrids introduce added complexity through dual loops, valves, and controls, increasing system costs by 20-50% over single-loop setups per component analyses, alongside challenges in packaging and durability under varying aftertreatment temperatures.^[29] Real-world durability data indicate LP and hybrid paths demand robust sealing against condensate and soot accumulation, but offer sustained benefits in homogeneity for combustion stability.^[30]

Engine-Specific Applications

EGR in Diesel Engines

In diesel engines, exhaust gas recirculation (EGR) is essential for reducing nitrogen oxides (NOx) emissions under lean-burn conditions, where excess air enables EGR rates up to 50% without risking misfire, unlike stoichiometric gasoline engines.^[1] This high recirculation dilutes intake oxygen and lowers combustion temperatures, suppressing NOx formation rates that accelerate above 1200°C.^[31] However, the oxygen dilution impairs fuel-air mixing and promotes incomplete combustion, exacerbating particulate matter (PM) and soot emissions through the classic soot-NOx trade-off.^[32] Cooled EGR became standard in heavy-duty diesel engines by the early 2000s to comply with stringent NOx limits, such as EPA 2004 standards, by mitigating risks of pre-ignition or detonation from hot recirculated gases.^[1] Cooling the EGR stream via heat exchangers reduces intake charge temperatures, enabling higher rates without thermal runaway, though it introduces complexities like condensate formation and increased system vulnerability to fouling.^[32] Under Euro 6 regulations, EGR deployment in light-duty diesels typically incurs a 10-15% penalty in brake specific fuel consumption (BSFC) due to reduced volumetric efficiency and combustion efficiency from dilution effects.^[33] Integration with turbocharging compounds this, as recirculated exhaust bypasses the turbine, diminishing boost pressure and necessitating engine downsizing or advanced multi-stage turbo systems to maintain power density while meeting emissions.^[16] Fleet data indicate EGR-related failures, such as cooler clogging from soot, occur at rates 2-3 times higher in diesels than in comparable gasoline applications, driven by higher exhaust particulate loads.

EGR in Gasoline Engines

Exhaust gas recirculation (EGR) in gasoline engines operates primarily in stoichiometric spark-ignition configurations, utilizing lower EGR rates typically ranging from 5% to 20% to suppress knock and minimize pumping losses, which is particularly advantageous at part-load conditions.^[34] Unlike diesel engines where EGR often incurs efficiency penalties due to soot formation and oxygen displacement, gasoline EGR enhances combustion stability by diluting the charge, allowing advanced ignition timing and reduced heat losses, thereby improving part-load thermal efficiency.^[35] Empirical data from engine testing indicate fuel economy gains of up to 10% with cooled EGR in direct-injected boosted setups, though stratified charge modes in early direct-injection systems achieved more modest 3-5% improvements by optimizing lean-burn operation.^[2] Following the implementation of stricter Corporate Average Fuel Economy (CAFE) standards in 2010, EGR systems were reintegrated into gasoline direct-injection (GDI) engines to boost efficiency and comply with fuel economy mandates without excessive reliance on hybridization.^[36] In GDI architectures, EGR enables higher compression ratios—often exceeding 10:1—by controlling end-gas autoignition, as observed in evaluations of turbocharged 1.6 L GDI engines where low-pressure EGR extended high-efficiency regions across the load map.^[37] However, elevated EGR rates introduce risks of catalyst poisoning from increased unburned hydrocarbons and particulates, constraining application to moderated levels in production vehicles.^[38] Specific implementations, such as in Volkswagen GDI engines, leverage EGR for knock-limited performance enhancement, permitting aggressive boost and compression while maintaining drivability under steady-state conditions.^[39] Transient operation poses challenges, however, with EGR-induced cyclic variability leading to control lags and potential hesitation during load changes, as high EGR dilutes the mixture and slows combustion response in GDI systems.^[40] These distinct empirical outcomes underscore EGR's role in gasoline engines as a tool for efficiency optimization at the expense of refined transient calibration, differing markedly from diesel-centric EGR strategies focused on NOx-soot trade-offs.^[41]

Emerging Use in Alternative Fuel Engines

In hydrogen-fueled internal combustion engines, exhaust gas recirculation (EGR) addresses challenges from hydrogen's high flame speed and low ignition energy, which promote autoignition and backfire during intake or compression strokes. By diluting the intake charge with inert exhaust gases, EGR reduces peak combustion temperatures and oxygen availability, thereby curbing NOx formation—typically reduced by 50-70% at EGR rates of 10-20%—while suppressing backfire through lowered reactivity of the mixture.^[42]^[43] Cooled EGR variants, tested in multi-cylinder setups as early as 2019, further enhance backfire control without inducing knocking, maintaining brake thermal efficiencies above 35% in direct-injection configurations under lean-burn conditions.^[44]^[45] In dual-fuel engines combining compressed natural gas (CNG) or biofuels with diesel pilot ignition, EGR adaptations from conventional systems require minimal hardware changes but influence trade-offs in emissions profiles. For CNG-diesel modes, EGR rates of 10-15% lower NOx by 20-40% via charge dilution, yet can elevate soot in high-load blends due to incomplete oxidation of hydrocarbon fractions, as documented in single-cylinder tests from 2020 onward.^[46]^[47] In biofuel-enriched setups, such as hydrogen-blended algae oil or biodiesel, 15% EGR achieves up to 30% NOx cuts by moderating flame propagation, though excessive rates (>20%) risk amplified particulate matter from oxygenated fuel interactions.^[48]^[49] EGR's role diminishes in pure electric vehicles lacking combustion exhaust, rendering it irrelevant for battery-electric drivetrains. However, in hybrid powertrains with alternative-fuel ICEs, EGR supports transient load management, mitigating NOx spikes during acceleration or mode switches, with empirical data from 2023 simulations indicating 15-25% emission reductions under variable-duty cycles without compromising overall system efficiency.^[50]^[51]

Emissions Benefits and Empirical Performance

NOx Reduction Efficacy and Supporting Data

Exhaust gas recirculation (EGR) primarily reduces NOx formation by diluting the intake charge with inert exhaust gases, lowering peak combustion temperatures and oxygen concentrations, which suppresses the Zeldovich mechanism dominant in diesel engines under steady-state operation. Empirical studies demonstrate NOx reductions ranging from 50% to 90% depending on EGR rates and engine load, with cooled high-pressure EGR enabling compliance with stringent standards like the US EPA 2010 heavy-duty limit of 0.2 g/bhp-hr NOx from engine-out levels exceeding 5-10 g/bhp-hr.^[1]^[52] For instance, introducing 8% EGR in a heavy-duty diesel engine at full load yielded a 54% NOx decrease while preserving indicated efficiency.^[52] Optimal EGR rates for diesel engines typically fall between 15% and 25% by mass fraction to balance NOx suppression with combustion stability, as compiled in technical reviews of EGR applications. At these levels, NOx emissions can drop by 68-76% relative to zero-EGR baselines under medium loads (e.g., 40%), but efficacy diminishes above 30% due to excessive dilution causing incomplete combustion, higher hydrocarbons, and potential misfire.^[1]^[18] This rate dependency is validated in certification cycles such as the EPA's FTP-75 transient test for light-duty diesels, where EGR contributes to meeting NOx limits through controlled dosing that maintains air-fuel ratios conducive to oxidation catalysts.^[53] Laboratory results overestimate real-world NOx reductions from EGR by 20-50%, as transient driving disrupts precise EGR metering, leading to suboptimal dilution and higher peak temperatures compared to steady-state bench tests. Independent analyses by the International Council on Clean Transportation (ICCT) of Euro 6 diesel vehicles reveal real-world NOx emissions often 4-10 times certification levels, attributable in part to EGR strategies tuned for lab cycles like the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) but less adaptive to variable loads.^[54]^[55] Heavy-duty field data similarly show EGR-enabled engines achieving only partial translation of lab gains to on-road conditions, with factors like cold starts and aggressive acceleration exacerbating discrepancies.^[56]

Impacts on Other Pollutants and Overall Engine Efficiency

In diesel engines, exhaust gas recirculation (EGR) typically elevates particulate matter (PM) emissions by impairing soot oxidation due to reduced oxygen availability and lower combustion temperatures, with studies showing net increases in engine-out soot at EGR rates above 20-30%.^[57] Hydrocarbon (HC) and carbon monoxide (CO) emissions also rise, primarily from incomplete combustion caused by EGR-induced dilution and oxygen displacement, leading to richer local mixtures and unburned fuel fractions.^[58] These secondary pollutant shifts necessitate compensatory aftertreatment, such as diesel particulate filters (DPF) and oxidation catalysts, which mitigate PM and HC/CO but introduce backpressure and regeneration demands that can elevate overall system opacity and operational complexity.^[59] Gasoline engines exhibit milder secondary emission effects from EGR, with minimal PM impact under stoichiometric conditions but potential HC and CO upticks at high EGR rates from diluted charge and delayed flame propagation; however, three-way catalysts effectively abate these under closed-loop control.^[1] Unlike diesels, gasoline EGR configurations often yield net efficiency gains of up to 5% at mid-loads by enabling throttleless load control, reducing pumping losses and improving volumetric efficiency without excessive throttling.^[2] Diesel EGR, conversely, imposes a brake specific fuel consumption (BSFC) penalty of 3-6% or more at moderate-to-high rates, stemming from charge dilution that lowers combustion efficiency and requires enriched fueling to maintain power output.^[60] Empirical dyno data confirm this trade-off, with fuel economy deteriorating as EGR prioritizes NOx suppression over complete combustion. Overall engine efficiency thus varies by application: beneficial in gasoline for part-load economy but detrimental in diesels unless offset by advanced calibration or hybridization. Holistic assessments reveal that EGR's CO2 footprint hinges on lifecycle trade-offs, where fuel consumption penalties may marginally elevate direct emissions, but NOx avoidance yields indirect benefits via reduced health and environmental remediation costs if quantified externalities (e.g., premature mortality from smog) surpass added fuel-cycle burdens.^[61] Empirical validation underscores no universal net gain without integrated aftertreatment, as secondary pollutant rises and efficiency losses can offset NOx reductions in unregulated or high-duty cycles.^[32]

Real-World Testing vs. Laboratory Results

Laboratory tests, such as those under the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), demonstrate substantial NOx reductions from exhaust gas recirculation (EGR) in diesel engines, often achieving effective cuts of 50-70% under steady-state conditions by diluting intake charge and lowering combustion temperatures.^[32] However, real-world on-road testing using Portable Emissions Measurement Systems (PEMS) during Real Driving Emissions (RDE) protocols reveals significantly diminished efficacy, with overall NOx reductions typically limited to 30-50% relative to baseline non-EGR levels, primarily due to transient operating conditions that constrain EGR deployment.^[62] These discrepancies arise from causal factors including cold-start phases, where low exhaust temperatures and combustion instability necessitate minimal EGR rates to prevent misfires and ensure drivability, and rapid accelerations, which introduce delays in EGR response and oxygen availability mismatches not replicated in controlled lab cycles.^[55] Empirical data from independent monitoring underscores these variances; for instance, Euro 6 diesel passenger cars certified post-2015 under WLTP exhibit NOx emissions 2-5 times higher than lab limits in urban driving scenarios, as measured by organizations like the International Council on Clean Transportation (ICCT) using PEMS.^[54] ADAC real-world ecotests of similar vehicles confirm elevated urban NOx levels, often 2-3 times lab values, attributable to frequent low-speed operations and idling that favor reduced EGR to maintain torque and avoid particulate increases. Additional contributors include sensor inaccuracies and gradual mapping calibration shifts in engine control units, which over time inflate apparent compliance by under-dosing EGR during non-steady conditions, as documented by Emissions Analytics in field verifications of post-2015 diesels.^[63] These lab-real world gaps highlight fundamental limitations in EGR's causal reliability outside optimized environments, where variables like ambient temperature fluctuations and driver-induced load changes override design-intent recirculation rates, leading to NOx outputs that undermine the technology's idealized emissions benefits.^[64] Independent PEMS datasets consistently show urban and mixed-cycle conformity factors exceeding 4 for many Euro 6 implementations, emphasizing the need for supplementary aftertreatment to compensate for EGR's variable performance in dynamic driving.^[65]

Drawbacks and Engineering Trade-Offs

Effects on Power, Fuel Economy, and Drivability

Exhaust gas recirculation (EGR) in diesel engines induces charge dilution, which reduces peak torque and power output by displacing fresh air intake and limiting turbocharger boost pressure to maintain combustion stability. Studies on turbocharged diesel engines report approximately 10% power loss at EGR rates of 5-20%, as the inert exhaust gases lower oxygen availability and flame speed, necessitating derating of fueling and boost.^[66] In gasoline engines, EGR effects on power are less pronounced, primarily manifesting as minor throttle lag during transients due to delayed combustion phasing, though overall peak power reductions are typically under 5% with optimized calibration.^[1] Fuel economy suffers from EGR implementation, particularly in diesels, where brake thermal efficiency (BTE) can decline by up to 11.7% due to incomplete combustion and higher heat losses from diluted mixtures. This translates to a 3-7% penalty in brake specific fuel consumption (BSFC) under mixed load cycles, as engines compensate with increased fueling, elevating CO2 output and partially offsetting NOx reductions.^[67] Gasoline engines experience smaller penalties or even slight gains in part-load efficiency from reduced pumping losses, but high-load EGR can still raise BSFC by 2-5% without advanced controls.^[1]^[32] Drivability impairments from EGR include acceleration hesitation from sluggish valve actuation and transient response delays, as well as visible black smoke emissions during tip-in events caused by over-fueling to counteract dilution-induced lean misfires. Dyno testing and field observations confirm these effects are more acute in diesels, where EGR exacerbates particulate formation under load steps, leading to torque dips and reduced responsiveness compared to non-EGR configurations.^[1] In gasoline applications, such issues are rarer but can include subtle surging at low speeds if EGR timing is not precisely managed.^[1]

Durability Issues and Failure Modes

EGR coolers frequently experience clogging from soot and carbon deposits, which restrict exhaust gas flow and reduce cooling efficiency. This buildup occurs due to the condensation of hydrocarbons in the cooler, forming a tar-like residue that hardens over time, particularly in diesel engines operating under varying loads. Failures have been documented as early as 26,000 miles (approximately 42,000 km) in Cummins-equipped vehicles, with shop reports indicating multiple replacements between 11,000 and 43,000 miles (18,000–69,000 km) within short periods. The average lifespan of an EGR cooler is estimated at around 80,000 miles (128,000 km), after which cleaning or replacement is often required to restore function, highlighting the inherent vulnerability introduced by recirculating particulate-laden exhaust through a heat exchanger.^[68]^[69]^[70] EGR valves commonly fail by sticking in open or closed positions due to deposit accumulation, heat stress, and mechanical vibration, disrupting precise control of recirculation rates. In diesel applications, such as those in over seven million Volkswagen Group (VAG) 1.4L, 1.6L, and 2.0L TDI engines, these valves exhibit high proneness to malfunction from soot-induced binding, leading to symptoms like rough idling, power loss, or activation of limp mode via diagnostic trouble codes. Sticking often results from carbonized residues preventing valve actuation, compromising the system's ability to modulate NOx reduction without allowing excessive exhaust ingress that dilutes intake charge.^[71]^[72] Recirculated exhaust gases also contaminate engine oil with elevated soot levels via blowby, accelerating abrasive wear on components like pistons, rings, and bearings through mechanisms such as particle embedment and scuffing. Studies demonstrate that EGR-induced soot loading, reaching up to 12% in heavily contaminated oil, promotes primarily abrasive wear but can escalate to scuffing under high concentrations, thereby shortening component life compared to non-EGR systems. This degradation arises from the chemical incompatibility of exhaust byproducts with lubricant additives, underscoring an engineering trade-off where emissions control heightens internal engine stresses.^[73]^[74]^[75]

Lubrication and Component Wear Acceleration

Exhaust gas recirculation (EGR) systems in diesel engines introduce soot, sulfuric acid, nitric acid, and other exhaust-derived contaminants into the lubricating oil, primarily via blowby gases entering the crankcase and interactions with the positive crankcase ventilation (PCV) system. These acids rapidly elevate the total acid number (TAN) of the oil, accelerating the depletion of alkaline additives and increasing oxidation rates, as the recirculated exhaust promotes nitration and corrosive wear. Soot levels in EGR-equipped engines commonly reach 3% or higher—double the 1.5% threshold typical of pre-EGR designs—leading to initial viscosity thickening that impairs lubrication film strength and promotes abrasive particle embedment on engine surfaces.^[76]^[74]^[77] Empirical oil analyses from EGR-operated compression-ignition engines consistently show elevated concentrations of wear metals, such as iron from cylinder liners and aluminum from pistons, compared to non-EGR baselines, indicating accelerated degradation of rings, liners, and valve train components. Analytical ferrography and metal spectroscopy in heavy-duty diesel tests further link EGR-induced soot and acidity to heightened particle generation and scuffing mechanisms, with base number (measured via ASTM D2896) depleting more rapidly due to intensified chemical attacks.^[78]^[79]^[80] Although high total base number (TBN) oils with enhanced dispersancy—such as those meeting API CJ-4 or PC-9 specifications—partially counteract soot agglomeration and acid neutralization demands, they do not fully eliminate the ingress effects, as evidenced by specialized EGR tests like the Cummins M11 protocol, which highlight persistent viscosity shifts and wear under simulated conditions. Fleet and laboratory data underscore that these factors causally shorten oil service intervals and contribute to overall component lifespan reductions through compounded abrasive and corrosive pathways.^[76]

Controversies and Policy Debates

EGR Deletes, Modifications, and Legal Ramifications

Aftermarket modifications known as EGR deletes typically entail the surgical removal of EGR valves, coolers, and associated piping, coupled with electronic reprogramming of the engine control unit to eliminate diagnostic trouble codes and restore fueling maps. These alterations are pursued primarily to counteract perceived degradations in engine responsiveness and longevity attributed to EGR-induced soot accumulation in intake manifolds and turbochargers. Dyno testing and operator reports from diesel performance communities indicate potential horsepower gains of 5 to 20 horsepower in common applications like 6.7L Cummins engines, alongside fuel economy uplifts of 1 to 2 miles per gallon under loaded conditions, stemming from reduced exhaust backpressure and cleaner combustion air.^[81]^[82] Such modifications also diminish maintenance intervals for EGR-related components, which can clog or fail prematurely in high-mileage vehicles.^[83] Notwithstanding these reported advantages, EGR deletes substantially amplify NOx output, as the system is engineered to dilute intake charge with inert exhaust gases to suppress peak combustion temperatures below 2,500°F, where NOx formation accelerates exponentially. Empirical assessments of tampered diesel engines reveal NOx elevations ranging from twofold to over fivefold baseline levels during on-road operation, exacerbating ground-level ozone and particulate matter formation.^[84]^[85] In the United States, such tampering contravenes Section 203(a)(3)(A) of the Clean Air Act, which proscribes removing or rendering inoperative any factory-installed emissions control device, enforceable by the Environmental Protection Agency (EPA) with civil penalties reaching $4,800 per defeat device sold or installed, escalating to $48,192 per day for ongoing violations by manufacturers.^[86]^[87] The California Air Resources Board (CARB) imposes parallel prohibitions under state vehicle code, classifying tampered operation as an infraction with fines up to $1,000 for initial offenses, mandatory repairs, and smog certificate revocation; commercial fleets face heightened scrutiny, including impoundment risks.^[88] Vehicle warranties are invariably nullified upon detection, as affirmed in service agreements from major OEMs like Ford and General Motors, exposing owners to unreimbursed repair costs. EPA enforcement actions from 2020 to 2023 yielded $55.5 million in penalties across 172 cases, underscoring prevalence among heavy-duty diesel operators despite deterrence.^[89]^[90] Proponents, including diesel enthusiasts and fleet managers, contend that stringent EGR mandates overprioritize marginal NOx abatement at the expense of engine durability and operational economics, citing accelerated wear from diluted combustion as evidence of regulatory overreach unsupported by holistic cost-benefit scrutiny.^[91] Conversely, agencies like the EPA and advocacy groups highlight NOx's causal role in photochemical smog and cardiopulmonary morbidity, estimating societal health burdens from unchecked emissions in billions annually, thereby justifying prohibitions to avert localized air quality degradation.^[89]^[92]

Involvement in Emissions Cheating Scandals

The Volkswagen emissions scandal, uncovered in September 2015, exemplified EGR's vulnerability to manipulation through software-based defeat devices that detected laboratory test cycles via parameters like steering angle, throttle position, and duration of operation. During testing, the engine control unit increased EGR rates to recirculate more exhaust gas, suppressing NOx formation and meeting Euro 5 and U.S. standards; outside tests, EGR was substantially reduced or disabled to enhance power and efficiency, yielding real-world NOx emissions 10 to 40 times the certified limits of 180 mg/km (Euro 5) or 0.2 g/mi (U.S.). This affected roughly 11 million diesel vehicles globally from model years 2009 to 2015, primarily in the EA189 and EA288 engine families.^[93] Analogous practices emerged in investigations of Fiat Chrysler Automobiles (FCA), where the U.S. EPA's 2017 notice of violation identified undisclosed auxiliary emissions control software in approximately 100,000 Ram 1500 and Jeep Grand Cherokee diesels (2014-2016 models) that selectively modulated emissions hardware, including EGR valve operation, to lower NOx only under test conditions. Post-scandal portable emissions measurement system (PEMS) testing confirmed real-world NOx outputs of 300-900 mg/km, far exceeding the Euro 6 limit of 80 mg/km, with cycle-detection logic enabling reduced EGR deployment during typical driving loads. FCA settled for over $800 million in 2019, mandating software fixes and recalls to eliminate these functions.^[94] Peugeot (PSA Group) faced similar scrutiny in Europe, with 2017 French probes revealing software in 2.0-liter BlueHDi diesels (2009-2015 models) that curtailed EGR rates beyond test cycles, ostensibly for thermal management but effectively prioritizing fuel economy over consistent NOx control, leading to on-road exceedances verified by independent testing. This contributed to broader findings across more than 10 major manufacturers by 2020, including Mercedes-Benz and Renault, where EGR's intricate calibration demands—balancing combustion temperature reduction against risks like soot buildup and power loss—enabled surreptitious throttling of the system in non-test scenarios, a tactic less feasible with passive technologies like selective catalytic reduction alone. Empirical PEMS data from these cases consistently highlighted the chasm between lab certifications and field performance, underscoring EGR's role in facilitating non-compliance without hardware alterations.

Critiques of Regulatory Mandates and Cost-Benefit Analyses

Critics of regulatory mandates requiring exhaust gas recirculation (EGR) for nitrogen oxides (NOx) reduction argue that these policies impose substantial compliance costs on manufacturers and consumers while delivering health benefits that are overstated or insufficiently weighed against induced trade-offs, such as elevated particulate matter (PM) emissions. EGR systems, mandated in diesel engines to meet stringent NOx limits under frameworks like the U.S. Environmental Protection Agency's (EPA) Tier standards and the European Union's Euro norms, increase PM and soot production by diluting the intake charge and lowering combustion temperatures, necessitating additional diesel particulate filters (DPFs) that add $1,000–$5,000 per vehicle in hardware and maintenance expenses.^[32]^[13] These costs, compounded by fuel economy penalties of 2–5% from EGR-induced inefficiencies, have cumulatively burdened global fleets with billions in retrofits and redesigns since the 1990s, yet analyses question the net societal value when PM's direct carcinogenic risks—classified as a Group 1 carcinogen by the World Health Organization—outweigh NOx's indirect effects via ozone formation.^[95]^[96] Empirical data further highlights overlooked causal trade-offs in cost-benefit analyses, where NOx-focused regulations inadvertently exacerbate other pollutants and greenhouse gases. In the European Union, the Dieselgate scandal—revealing widespread NOx cheating via software bypassing EGR—triggered a diesel market share plunge from over 50% in 2015 to under 20% by 2023, prompting shifts to gasoline vehicles with 20–30% higher CO2 emissions per kilometer and accelerating fleet turnover that elevated short-term CO2 outputs despite long-term electrification goals.^[97]^[98] U.S. assessments similarly critique uniform NOx standards for ignoring regional air quality dynamics, where urban PM from EGR-amplified soot poses greater respiratory and cardiovascular risks than ambient NOx levels, with peer-reviewed studies estimating PM2.5 exposure responsible for 4–8 million premature deaths annually worldwide versus NOx's more diffuse ozone contributions.^[99]^[100] Skeptics, including economists at institutions like the Cato Institute, contend that regulatory agencies favor epidemiological models projecting NOx benefits—often extrapolated from high-exposure cohorts—over real-world on-road data showing persistent testing gaps of 10–20% between lab and actual emissions, leading to policies that prioritize theoretical pollutant hierarchies amid ideological pressures rather than pragmatic engineering evaluations of total pollutant burdens.^[99]^[101] Such approaches, they argue, undervalue consumer impacts like reduced drivability and higher ownership costs, with benefit-cost ratios for NOx controls frequently failing rigorous scrutiny when recalibrated for verifiable health endpoints and geographic variability, as evidenced by analyses deeming many Clean Air Act provisions net-negative after adjusting for overoptimistic mortality assumptions.^[102] These critiques underscore a systemic preference for model-driven mandates over empirical validation, potentially inflating global expenditures on NOx abatement—estimated at $2,000–$8,000 per ton removed via EGR-SCR combinations—without proportionate gains in air quality metrics.^[103]^[104]

Recent Advancements and Future Directions

Innovations in EGR Design and Integration

Dual high-pressure (HP) and low-pressure (LP) EGR systems have emerged as key innovations since the mid-2010s, enabling better exhaust gas dilution uniformity by recirculating cooler, post-turbocharger exhaust, which minimizes interference with boosting efficiency compared to HP-EGR alone.^[105] In 2.0-liter turbocharged gasoline engines, these hybrid configurations enhance charge air cooling and allow higher EGR rates without excessive combustion instability, as demonstrated in SAE testing where LP-EGR integration improved overall system responsiveness.^[105] Prototypes from the early 2020s, including integrated LP-EGR in gasoline direct injection engines, have reduced fuel consumption penalties to approximately 2-3% under high-load conditions through optimized mixing and reduced pumping losses, though trade-offs in transient response persist.^[106] Advancements in electronic control units (ECUs) and machine learning have introduced predictive EGR strategies to address lag during transients, with algorithms forecasting load changes to preemptively adjust valve positions and injection timing.^[107] In diesel systems from manufacturers like Cummins and Bosch, these controls integrate real-time sensor data with model predictive techniques, achieving up to 50% faster EGR response in dynamic cycles by coordinating with variable geometry turbos, thereby mitigating NOx spikes without proportional efficiency losses.^[108] Empirical validations in 2020s studies confirm these ECU enhancements lower emissions variability, but require robust calibration to avoid over-dilution penalties in varying ambient conditions.^[107] Synergistic integration of EGR with selective catalytic reduction (SCR) systems has enabled 2023-era engines to meet prospective Euro 7 NOx limits with reduced hardware complexity, as EGR pre-treats exhaust to optimize urea dosing efficiency in SCR, cutting overall system mass by about 10% in heavy-duty applications.^[109] This combined approach, tested in retrofitted vehicles, achieves sub-Euro 7 NOx levels under real-world driving while preserving fuel economy, though durability of integrated coolers remains a challenge amid higher thermal loads.^[110] Despite these gains, post-2015 designs still grapple with inherent trade-offs, such as soot accumulation in LP loops necessitating advanced filtration.^[111]

Alternatives and Complementary Technologies

Selective catalytic reduction (SCR) systems, which inject aqueous urea (diesel exhaust fluid, or DEF) into the exhaust stream upstream of a catalyst to convert NOx to nitrogen and water, offer a primary aftertreatment alternative to EGR for NOx abatement. SCR achieves NOx reduction efficiencies of 80-95% across a broad range of operating conditions without the combustion dilution effects inherent to EGR, thereby avoiding penalties to engine power density, fuel economy, and component durability.^[112]^[113] In heavy-duty diesel applications, SCR enables engine calibrations optimized for peak thermal efficiency—often yielding 3-7% improvements in fuel consumption compared to EGR-reliant designs—by minimizing reliance on high EGR rates that otherwise elevate particulate matter and require aggressive diesel particulate filter management.^[114]^[115] This causal separation of NOx control from in-cylinder processes positions SCR as superior in scenarios dominated by EGR's trade-offs, such as long-haul trucking under Euro VI or EPA 2010 standards, where SCR has become the dominant technology since 2010.^[112] However, SCR introduces ongoing operational costs from DEF consumption, typically 2-6% of fuel volume equivalence, translating to $0.02-0.08 per liter of diesel equivalent based on urea pricing and dosing rates under steady-state loads.^[112] These costs are offset by efficiency gains in heavy-duty engines, where SCR's allowance for reduced EGR supports up to 20% higher indicated thermal efficiencies in some optimized cycles compared to EGR-only systems constrained by soot-NOx trade-offs.^[116] Complementary use of SCR with moderate EGR levels—common in modern heavy-duty designs—further balances engine-out NOx loads to enhance overall system robustness, though pure SCR configurations demonstrate viability for low-NOx combustion strategies.^[117] Lean NOx traps (LNT), also known as NOx adsorbers, provide another complementary or alternative pathway, particularly for light-duty lean-burn diesel and gasoline engines, by storing NOx as nitrates during oxygen-rich exhaust phases and regenerating via brief rich pulses to release and reduce it over precious metal catalysts. LNTs excel in transient low-EGR regimes where EGR's dilution would impair drivability, achieving 70-90% NOx conversion when hybridized with EGR to precondition exhaust NOx levels below storage capacity thresholds.^[118] Empirical data from Euro 6 passenger car evaluations indicate that EGR-LNT hybrids outperform standalone EGR in worldwide harmonized light-duty test cycle NOx compliance, with reduced sulfur sensitivity and periodic regeneration enabling up to 50% lower cumulative NOx over dynamic cycles versus high-dilution EGR alone. Yet, LNTs demand precise air-fuel excursion control, limiting scalability to heavy-duty applications without SCR augmentation.^[119] Regulatory persistence of EGR mandates, despite SCR and LNT's capacity to shoulder greater NOx burdens via aftertreatment, stems from certification pathways emphasizing engine-out controls to ensure catalyst robustness under tampering risks, as critiqued in analyses of real-world deployment where alternatives could diminish EGR's dilution imperatives and associated failure modes. International Council on Clean Transportation briefs highlight that while integrated EGR-SCR systems dominate for cost-effective compliance, standalone aftertreatment pathways like advanced LNT or SCR variants could reduce in-cylinder complexity if policy shifted toward total tailpipe accountability over hybrid metrics.^[120]

Ongoing Research and Empirical Challenges

Recent computational fluid dynamics (CFD) simulations of EGR systems reveal persistent gaps in capturing transient NOx emission spikes, particularly during rapid load changes and engine transients, where models often underpredict peak values by up to 20-30% compared to experimental data due to inadequate resolution of turbulent mixing and chemical kinetics.^[121]^[122] Hybrid approaches integrating CFD with neural networks have been proposed to address these discrepancies, yet validation against real-world dynamometer tests shows residual uncertainties in causal links between EGR flow dispersion and NOx formation under non-steady conditions.^[123] Durability challenges in low-pressure EGR (LP-EGR) systems remain unresolved for extended mileage, with long-term soot accumulation beyond 200,000 km unproven in field operations, as accelerated bench tests indicate progressive fouling that impairs heat transfer efficiency by 20-30% and accelerates cooler degradation.^[124]^[125] Emerging field trials highlight corrosion in EGR coolers, linked to condensed hydrocarbons and acidic exhaust components, prompting material innovations like ferritic stainless steels, though scalability to high-mileage fleets lacks comprehensive empirical data, revealing causal uncertainties in soot handling under varying duty cycles.^[126]^[127] Ongoing investigations into biofuel compatibility underscore EGR's potential exacerbation of fouling with biodiesel blends, where higher particulate matter increases deposit rates, complicating NOx control without verified long-term stability data.^[128] In the context of electrification transitions, empirical studies question EGR's sustained viability in hybrid powertrains, as downsized engines with electric boosting show marginal fuel economy gains from EGR (around 4-5%) but face integration challenges with thermal management systems, potentially diminishing its role as battery-electric dominance reduces internal combustion demands.^[129]^[130] These uncertainties drive research toward adaptive controls and alternatives, prioritizing causal validation through extended fleet monitoring over simulation reliance.

References

[1]
Exhaust Gas Recirculation - DieselNet
Exhaust gas recirculation (EGR) is an emission control technology allowing significant NOx emission reductions from most types of diesel engines.
[2]
Clean EGR for Gasoline Engines – Innovative Approach to ...
30-day returnsMar 27, 2017 · External Exhaust Gas Recirculation (EGR) has been used on diesel engines for decades and has also been used on gasoline engines in the past.Missing: drawbacks | Show results with:drawbacks
[3]
[PDF] Double Exhaust Gas Recirculation(EGR) System
But the problems that may arise are: system contamination, increased soot-in-oil, transport losses increase, Complicated variable geometry turbocharger (VGT) - ...
[4]
Diagnostic Evaluation of Exhaust Gas Recirculation (EGR) System ...
30-day returnsApr 13, 2020 · Diagnosing the Exhaust Gas Recirculation (EGR) Valve remains one of the most challenging problems in emissions control systems diagnostics.Missing: drawbacks issues
[5]
Understanding the effect of external-EGR on anti-knock ...
They found that EGR effectively reduced the intake air temperature, prolonged the combustion duration, and had a good inhibitory effect on the knock tendency.
[6]
Gasoline engine exhaust gas recirculation – A review - ScienceDirect
Recirculating exhaust gas on gasoline engines is employed primarily to reduce throttling loss at part load range in order to reduce fuel consumption.
[7]
Timeline of Major Accomplishments in Transportation, Air Pollution ...
Nov 22, 2024 · 1972. Exhaust gas recirculation valves are developed as automakers strive to meet NOx standards. 1973. EPA creates new transportation controls ...Missing: EGR | Show results with:EGR
[8]
[PDF] Implementing technology-forcing policies: The 1970 Clean Air Act ...
Feb 19, 2014 · Compliance strategies included retarded spark timing and air injection systems for HC and CO emissions, and exhaust gas recirculation (EGR) for ...
[9]
Diesel passenger car PM emissions: From Euro 1 to Euro 4 with ...
This paper examines the impact of the emission control and fuel technology development on the emissions of gaseous and, in particular, PM pollutants from ...
[10]
USA: Heavy-Duty Onroad Engines - Emission Standards - DieselNet
To achieve the 2004 emissions, most manufacturers introduced exhaust gas recirculation (EGR)—in many cases in conjunction with diesel oxidation catalysts—on ...Applicability And Testing · Emission Standards · California Low Nox...<|separator|>
[11]
[PDF] United Nations Global Technical Regulation No. 18 - UNECE
The functional requirements and test procedures were developed so that they would be able to provide an internationally harmonized set of functional OBD ...
[12]
[PDF] A technical summary of Euro 6/VI vehicle emission standards
Regulatory test cycles for heavy-duty engines have continuously improved over the European regulatory pathway for these vehicle types.
[13]
[PDF] Costs of emission reduction technologies for heavy-duty diesel ...
Feb 29, 2016 · This paper discusses the costs of emission reduction technologies for heavy-duty diesel vehicles, including in-cylinder engine controls, ...<|control11|><|separator|>
[14]
Visualization and Analysis of Condensation in Exhaust Gas ...
30-day returnsApr 7, 2013 · EGR cooler heat exchangers, however, tend to lose efficiency and have increased pressure drop as deposit forms on the heat exchanger surface due ...Missing: risks | Show results with:risks
[15]
Three condensation paths of exhaust and its five effects on exhaust ...
This paper reviews the effects of hydrocarbon vapor, water vapor and acid vapor condensation on EGR cooler fouling and thermal performance from 1998 to 2023.
[16]
HD Diesel Engines with EGR Technology - DieselNet
A technical paper discussing the evolution of heavy-duty diesel engine components and sub-systems to meet the US EPA 2004 and Euro IV emission standards ...Missing: coolers | Show results with:coolers
[17]
Emission Formation in Diesel Engines - DieselNet
The availability of high combustion temperature provides adequate energy to help the chemical reactions described by the Zeldovich mechanism, thus causing more ...
[18]
NOx emissions reduction through applying the exhaust gas ...
NOx emissions reduction through applying the exhaust gas recirculation (EGR) technique for a diesel engine fueled with a diesel-biodiesel‑diethyl ether blend.
[19]
[PDF] Thermodynamic and Chemical Effects of EGR and Its Constituents ...
EGR can be used beneficially to control combustion phasing in HCCI engines. To better understand the function of EGR, this study experimentally investigates.Missing: drawbacks | Show results with:drawbacks
[20]
EGR Systems & Components - DieselNet
EGR systems have been commercialized as a NOx reduction method for a wide range of diesel engines from light-, medium- and heavy-duty diesel engines.Missing: stricter post-
[21]
What is an EGR Cooler? - AMBAC International
An EGR cooler is a water-to-air heat exchanger that cools exhaust gas to lower combustion temperatures, located between the turbo and EGR valve.
[22]
EGR Control Strategy - DieselNet
An EGR control strategy has to be developed to meet not just NOx reduction targets, but to ensure PM emissions meet design targets.Missing: ECU algorithms
[23]
Assessment of air management strategies to improve the transient ...
Jan 1, 2023 · This research evaluates the EGR influence on the transient response of a turbocharged gasoline engine and, mainly, the potential of three air management ...Missing: metering | Show results with:metering
[24]
Numerical and thermodynamic study on effects of high and low ...
Mar 1, 2020 · The HP EGR mainly has two advantages over the LP EGR: Firstly, the volume of HP EGR is smaller due to a higher EGR loop pressure; Secondly, as ...
[25]
[PDF] Efficiency and Mixing Analysis of EGR-Systems for Diesel Engines
Feb 2, 2014 · The efficiency of the EGR-system is analyzed, focusing on keeping the fuel penalty low for a given EGR-rate. Different layouts of the EGR system ...Missing: Tier | Show results with:Tier
[26]
High-pressure versus low-pressure exhaust gas recirculation in a ...
Dec 16, 2018 · It was shown that low-pressure exhaust gas recirculation was more efficient than high-pressure exhaust gas recirculation to reduce NOx emissions ...
[27]
Effect of High and Low Pressure EGR on Diesel Engine Matched ...
Under the maximum torque condition, the fuel economy of mechanical compound turbine diesel engine matched with low-pressure EGR system is better than with high ...
[28]
Switching strategy between HP (high pressure)- and LPEGR (low ...
The presented paper proposes the combination of HP- and LPEGR systems to minimise fuel consumption with reduced NO x emissions.Missing: empirical savings
[29]
Diesel Hybrid Exhaust Gas Recirculation (EGR) Systems
Feb 25, 2019 · Hybrid EGR systems combine High Pressure EGR (HP EGR) with Low Pressure EGR (LP EGR), routing exhaust gas from different points in the engine.
[30]
[PDF] EGR_routing_paper_R2 - the University of Bath's research portal
They found that LR EGR is favourable for low loads and SR. EGR is favourable for high loads when achieving high EGR rates (NOx 0.5 g/kWh) with this engine ...
[31]
NOx Reduction by Exhaust Gas Recirculation – MAN explains
Nov 18, 2014 · The formation rate of the majority of nitric oxide is dependent on peak temperatures in the engine cylinders – above 1200oC the formation is ...
[32]
Effect of EGR on Emissions and Engine Performance - DieselNet
EGR reduces NOx emissions but increases PM emissions and fuel consumption. High EGR rates can increase PM emissions.Missing: loss | Show results with:loss
[33]
Experimental Study on NOx Reduction of Diesel Engine by EGR ...
Feb 8, 2024 · Exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) are crucial technologies for mitigating nitrogen oxide (NOx) emissions ...
[34]
Effect of Exhaust Gas Recirculation and Spark Timing on ... - NIH
Nov 11, 2022 · This research investigates the effects of EGR on combustion and emission performance under an oxygen-enriched ratio (OER) of 25% with five EGR ratios (0–20%)<|control11|><|separator|>
[35]
Exhaust Gas Recirculation for Improved Part and Full Load Fuel ...
30-day returnsApr 2, 2006 · The full load emissions reduction potential of EGR was also demonstrated, with emissions of CO2 reduced by up to 17% and engine-out HC and CO ...
[36]
Light-Duty Vehicle Greenhouse Gas Emission Standards and ...
May 7, 2010 · The 250 grams per mile of CO2 equivalent emissions limit is equivalent to 35.5 mpg if the automotive industry were to meet this CO2 level all ...
[37]
Evaluation of Emerging Technologies on a 1.6 L Turbocharged GDI ...
Oct 7, 2025 · They found an increase in fuel efficiency over the whole engine map by using LP-EGR on 10.5:1 CR with maximum advantages at high load due to the ...
[38]
The role of EGR in PM emissions from gasoline engines
Oct 8, 2025 · The application of EGR led to a 15-20% reduction in the particle concentration peak of the distribution for both fuels and engine operating ...
[39]
The scope for improving the efficiency and environmental impact of ...
At mid- to high-loads EGR is added to maintain low peak combustion temperatures, pressure rise rates, and NOx emissions, while at the highest loads the engine ...
[40]
Characterization of temporal variations and feedback timescales of ...
Oct 11, 2018 · Analysis of cyclic variability of heat release for high-EGR GDI engine operation with observations on implications for effective control.
[41]
The Effects of EGR Composition on Combustion Performance and ...
Sep 15, 2020 · EGR gives proven thermal efficiency benefits for SI engines which improve vehicle fuel economy, as demonstrated through literature and ...
[42]
Fundamental Study on Hydrogen Low-NOx Combustion Using ...
Jan 9, 2022 · In general, reports on the low-NOx effect of exhaust gas recirculation for hydrocarbon fuels show that NOx was reduced by about 50% and 20% when ...
[43]
Power Improvement and NOx Reduction Strategies for a Hydrogen ...
Several in-cylinder strategies have been adopted to reduce the NOx emissions, with exhaust gas recirculation (EGR) being the most widely used method for various ...1 Introduction · 4.3 Egr · 4.4 Aftertreatment Device
[44]
Control of backfire and NOx emission reduction in a hydrogen fueled ...
Mar 1, 2019 · Exhaust gas recirculation (EGR) and water injection techniques were adopted to control combustion anomalies (backfire and knocking) and reduce ...Missing: mitigation | Show results with:mitigation
[45]
Effects of exhaust gas recirculation on nitrogen oxides, brake torque ...
Jan 18, 2024 · This study investigated the effects of exhaust gas recirculation (EGR) on emission and efficiency in a hydrogen direct injection spark ...
[46]
An Experimental Study on the Effect of Exhaust Gas Recirculation on ...
30-day returnsApr 13, 2020 · Other potential advantages of such an engine include the flexibility of switching back to diesel-only mode, reduced hardware development costs ...
[47]
Effect of EGR on Combustion and Exhaust Emissions in ...
Aug 6, 2025 · The combustion and exhaust emissions characteristics of a supercharged dual-fuel natural gas engine with a single cylinder were analyzed.Missing: 2020s | Show results with:2020s
[48]
Production and utilization of hydrogen enriched fifth generation ...
Jul 17, 2025 · Several researchers have explored after-treatment systems and exhaust gas recirculation (EGR) techniques to mitigate NOx emissions. Cold EGR ...<|separator|>
[49]
The combined effect of EGR and hydrogen addition on a Syzygium ...
Using hydrogen in dual fuel mode in a CI engine enhances performance and lowers exhaust emissions, while using the EGR approach reduces NO X emissions.
[50]
Numerical Investigation on Hydrogen Enrichment and EGR on In ...
30-day returnsApr 8, 2024 · Hydrogen enrichment in dual-fuel operation significantly reduces soot and NOx emissions under low load conditions. Adding hydrogen in diesel ...Missing: CNG 2020s
[51]
Research and optimization of hydrogen addition and EGR on ... - NIH
Dec 7, 2023 · The results show that the pressure, temperature, and NO x emission in the engine's cylinder can all be reduced by raising the EGR at three different loads.
[52]
Exploring the NOx Reduction Potential of Miller Cycle and EGR on a ...
Apr 3, 2018 · The introduction of 8%EGR decreased the levels of NOx by 54% while maintaining similar net indicated efficiency at the baseline IVC. The ...Missing: typical percentage
[53]
[PDF] Technology Assessment: Lower NOx Heavy-Duty Diesel Engines
Sep 15, 2015 · The technology is widely available commercially. 8. EGR. EGR is used as a NOX reduction strategy in modern commercial heavy-duty diesel engines.Missing: validation | Show results with:validation
[54]
Road tested: Comparative overview of real-world versus type ...
The analysis not only includes NOx testing results but also adds information on the real-world carbon dioxide (CO2) performance for each vehicle ...Missing: EGR | Show results with:EGR
[55]
[PDF] Comparative overview of real-world versus type-approval NOX and ...
This paper combines the publicly available emissions data from these organizations and government bodies, as well as data that ICCT purchased from a commercial ...
[56]
[PDF] Current state of NOx emissions from in-use heavy-duty diesel ...
U.S. regulatory agencies have put in place regulations aimed at reducing NOx emissions from heavy-duty diesel engines. In 2000, the U.S. Environmental ...
[57]
Effects of High Injection Pressure, EGR and Charge Air Pressure on ...
30-day returnsNov 1, 2009 · The results from the studied cases showed that increasing EGR from 0 to 30% reduces both soot formation and oxidation resulting in higher engine ...
[58]
[PDF] Effect of Exhaust Gas Recirculation on CO Emissions from A ...
Abstract: In this paper an experimental investigation was conducted to study the effect of using different ratios of. Exhaust Gas Recirculation (EGR) on the ...Missing: sae. | Show results with:sae.
[59]
[PDF] Costs of Emission Reduction Technologies for Diesel Engines Used ...
The DPF and the diesel oxida- tion catalyst (DOC) control PM in the exhaust stream; the DOC is also effec- tive at reducing HC and CO emissions. Selective ...
[60]
[PDF] università degli studi di trieste - ArTS
An increase of BSFC of around 3% compared to the model without tuning, and around 6% compared to the model without EGR has been achieved. The tuning ...<|separator|>
[61]
Cost–Benefit Analysis of Synergistic CO2 and NOx Energy-Efficient ...
This study traced the CO 2 and NO x emission streams of 33 energy-efficient technologies, hidden in the supply chain during the production phase, through ...
[62]
[PDF] Real-world Vehicle Emissions - International Transport Forum
The particulars of EGR control strategies have been key to the high real-world NOx emissions of Euro-5 diesel cars, sold in Europe between 2009 and 2015. The ...<|control11|><|separator|>
[63]
Discrepancies between best and worst diesel cars reaches record ...
Jun 22, 2025 · We have now tested six of the latest RDE-compliant diesel vehicles, also known as 'Euro 6d-temp'. Their average NOx emissions were 48 mg/km, 40% ...
[64]
Increase in nitrogen oxides due to exhaust gas recirculation valve ...
However, laboratory and real-world emission tests do not show the same downward trend as the new emission standards implemented. In-use diesel vehicle NOx ...
[65]
[PDF] Real-world exhaust emissions from modern diesel cars
Oct 13, 2014 · This report presents strong evidence of a real-world NOx compliance issue for recent- technology diesel passenger cars, both for the EU and US ...
[66]
EGR Systems Evaluation in Turbocharged Engines - ResearchGate
Oct 11, 2025 · Downsizing a diesel engine using turbocharger and coupling it with exhaust gas recirculation is the recent trend to improve engine performance ...
[67]
Effect of Exhaust Gas Recirculation (EGR) on the Performance ...
The experimental results showed that adding EGR to diesel engine provided significant reductions in brake power (bp), brake thermal efficiency and exhaust gas ...
[68]
Clogged EGR cooler at 26,000 miles | Cummins Diesel Forum
Jul 10, 2019 · Hi all, I've owned a 2017 Ram 2500 for a little over a month now. It's thrown P2281 (leak between throttle body and MAF) a couple of times, ...Missing: failure rates
[69]
EGR cooler | Ford Powerstroke Diesel Forum
Mar 25, 2013 · Just a heads up in the last 3 weeks at our shop we have done 7 egr coolers for clogging. Mileage ranged from 11000 to 43000 so just a heads ...what are signs of clogged egr cooler | Ford Powerstroke Diesel ForumWill a new oil cooler and egr cooler lower degas bottle pressure?More results from www.powerstroke.org
[70]
https://roadwarrior-inc.com/what-is-an-egr-cooler-and-why-do-we-need-them/
[71]
High EGR failure rates create aftermarket opportunity
The EGR valves used in more than seven million European VAG diesel vehicles, spanning 1.4, 1.6 and 2.0L TDI engines, are prone to failure. Heat, vibration and ...
[72]
https://highwayandheavyparts.com/blog/why-is-my-diesel-egr-valve-failing-5-common-causes/
[73]
How it Works: Exhaust Gas Recirculation (EGR) - Lubrizol
EGR is also known to accelerate engine oil degradation and increase the concentration of contaminants such as soot in the oil. This soot loading can lead to ...Missing: wear | Show results with:wear
[74]
Effect of exhaust gas recirculation (EGR) contamination of diesel ...
Sep 10, 2007 · The increase in soot and solid particulate content in the engine oil may result in accelerated abrasive wear of critical engine components.Missing: Lubrizol | Show results with:Lubrizol
[75]
Effect of EGR contamination of diesel engine oil on wear
Wear occurred primarily by an abrasive mechanism, but in oil with the highest soot loading of 12%, scuffing and soot particle embedment were also observed.Missing: Lubrizol | Show results with:Lubrizol
[76]
EGR Systems and Lubricating Oil in Diesel Engines
Diesel engine oils are now exposed to a higher level of contamination that can degrade the oil and damage engine parts.Missing: Lubrizol acceleration
[77]
Effect of diesel soot on lubricant oil viscosity - ScienceDirect.com
The results showed that viscosity of the oil samples increased with increase in soot at both 40 and 90 °C.
[78]
Experimental Investigation of the Effect of Exhaust Gas Recirculation ...
Relatively higher concentrations of all wear metals were found in the lubricating oil of the EGR-operated engine, which indicates higher wear of various engine ...
[79]
https://www.sae.org/publications/technical-papers/content/860378/
[80]
https://www.sae.org/publications/technical-papers/content/980179/
[81]
Does Removing the EGR Increase Power?
Aug 2, 2024 · Removing the EGR system, you can observe a little increase in horsepower because of removing the inert gases that are recirculating into the combustion.
[82]
EGR Delete Info -- Educate yourself - Rawze.com
Feb 20, 2016 · Even a bad delete will usually gain a bit of something in fuel mileage. The act of lowering the exhaust restrictions yields a gain due to better ...
[83]
https://www.spelabautoparts.com/blogs/news/how-egr-delete-benefits-diesel-engines-performance-and-efficiency
[84]
The Pros and Cons of an Exhaust Gas Recirculation (EGR) Delete
Aug 30, 2024 · While EGR deletes can boost power to a vehicle, they can cause engines to produce high levels of nitrogen oxide (NOx) into the air. The increase ...Missing: percentage | Show results with:percentage
[85]
Comparison between Emissions Tune w/ EGR off and Fully deleted ...
May 13, 2021 · EGR is considered first generation emissions control for NOX. ... Cleaner tunes can be had by disabling EGR but at the expense of increased nox ...
[86]
[PDF] Aftermarket Defeat Devices and Tampering are Illegal and ... - EPA
Also, section 203(a)(3)(A) of the Clean Air Act prohibits any person from knowingly removing or rendering inoperative (i.e., “tampering”) any such emissions ...
[87]
Anti-Tampering - Maryland Department of the Environment
Under federal law, anyone who sells or installs a device to defeat emission controls can be fined up to $4,800 for each defeat device, and dealers can be fined ...
[88]
[PDF] Advisory #292 July 10, 2020 - California Air Resources Board
Jul 10, 2020 · Operating an uncertified, tampered, or illegally-modified vehicle on a public highway is a violation of California law and subject to a failure ...
[89]
Stopping Aftermarket Defeat Devices for Vehicles and Engines - EPA
Dec 13, 2024 · EPA finalized 172 civil enforcement cases from FY 2020 through FY 2023 resulting in civil penalties totaling $55.5 million. During the same ...
[90]
Diesel Emissions Scheme Exposed: Noteworthy $3.1 Million Penalty ...
Apr 22, 2025 · From multi-million-dollar fines to probation, illegal deletion of diesel emissions devices comes with steep penalties. Since 2020, the EPA has ...<|control11|><|separator|>
[91]
fuel mileage after EGR Delete? | Ford Powerstroke Diesel Forum
Mar 27, 2011 · I recently done an egr cooler delete on my 04 350 SRW 4x4 it always got a consistent 17.5 mpg but since i deleted the cooler it has dropped to 10-12 mpg.Worse MPG after DPF/EGR Delete, Thoughts? - PowerStroke.orgFuel mileage after EGR delete ? | Ford Powerstroke Diesel ForumMore results from www.powerstroke.orgMissing: economy studies
[92]
Diesel shop fined $10M for making and selling Emissions Defeat ...
Sep 16, 2024 · EGR "messing with" does affect power. EGR lowers combustion temps, and the thermodynamic work the engine is producing is directly affected ...
[93]
How did Volkswagen's diesel defeat device work? - Motor Authority
Feb 28, 2018 · Where VW got mischevious is with the EGR valves. The "defeat device" understood if the car was on a dyno for, say, emission testing, or if a ...
[94]
Fiat Chrysler Automobiles Clean Air Act Civil Settlement Information ...
Jan 10, 2019 · EPA alleged that FCA installed undisclosed software functions and defeat devices in approximately 100,000 Ram 1500 and Jeep Grand Cherokee light ...
[95]
Effect of Exhaust Gas Recirculation (EGR) on Performance and ...
The NO formation and decomposition inside the combustion chamber can be described by extended Zeldovich Mechanism[8]. The principal reactions at near ...
[96]
Diesel Engines & Public Health | Union of Concerned Scientists
Sep 26, 2024 · The World Health Organization (WHO) classifies diesel exhaust as carcinogenic to humans, and ample research demonstrates that its components, which include PM ...<|control11|><|separator|>
[97]
10 years after Dieselgate, the car industry is paving the way… | T&E
Sep 16, 2025 · “Ten years ago the Dieselgate scandal showed that carmakers didn't have any issue with fraudulently altering the emissions of their vehicles.
[98]
Diesel emissions: are diesel cars bad for the environment? - RAC
Mar 18, 2025 · In 2015 diesels had a massive 48.5% share of the new car market. Yet by 2023 that market share had fallen to just 8% and continues to drop year- ...
[99]
Rethinking Air Quality Regulation | Cato Institute
Jul 15, 2025 · However, since particulate matter was first monitored and regulated there has been considerable disagreement about its actual health effects.
[100]
Health effects research and regulation of diesel exhaust
Despite an extensive body of results, scientific debate continues regarding the nature of the lung cancer risk posed by inhalation of occupational and ...Missing: benefits drawbacks<|separator|>
[101]
The gap between real-world and official values for CO2 emissions ...
Jan 31, 2024 · The gap reached a level of 14% in 2022, i.e. real-world emission levels were 14% higher than advertised by manufacturers. The gap has grown 80% ...
[102]
Has Economic Analysis Improved Regulatory Decisions?
As we will document, many regulations would not pass a benefit–cost test, while others could yield much higher net. 68 Journal of Economic Perspectives. Page 3 ...
[103]
Navigating the challenges of global NOx emissions throughout the ...
May 20, 2025 · A summary of key incumbent and emerging post-combustion NOx abatement technologies is provided, with costs of treatment in the range of $2–8 per ...
[104]
Selective catalytic reduction: costs of NOx removal?
In stockThe base case cost for NOx removal using SCR is 0.25 c/kWh, or $4,000/ton. Coal plants are about 2x higher at 0.5c/kWh, and marine diesel engines at 0.7c/kWh.
[105]
Benefits of a Dual HP and LP EGR Circuit on a Turbocharged Direct ...
30-day returnsMar 28, 2022 · The individual benefits of high-pressure (HP-EGR) and low-pressure (LP-EGR) loop EGR system to assist the boosting system of a 2.0 L Gasoline ...
[106]
(PDF) Experimental investigation on integrated LP-EGR system for ...
Various counter measures can be considered to improve the efficiency of powertrains and LP EGR system is one of those In this paper, an experimental study on ...
[107]
Machine learning-enhanced optimization of exhaust gas ...
Sep 2, 2025 · This study presents a pioneering approach to optimizing diesel engine exhaust gas recirculation (EGR) strategies through a hybrid ...
[108]
Dynamic modeling and model predictive control of an RCCI engine
Experimental validation results show that the designed controller can track desired CA50 and IMEP with less than 1.4 CAD and 15 kPa tracking errors on a range ...
[109]
(PDF) NOx Emissions below the Prospective EURO VII Limit on a ...
Sep 5, 2025 · Results show that an EGH of 5 kW is enough to produce a significant NOx emissions abatement below the EURO VI and EURO VII limits. A ...
[110]
Experimental Investigation of NOx Emissions and SCR Optimization ...
Aug 8, 2025 · Exhaust gas recirculation (EGR) also plays a significant role in NOx reduction. Kosmadakis et al. [22] investigated EGR effects in a port fuel ...
[111]
Effect of LP-EGR on the Emission Characteristics of GDI Engine
Dec 22, 2021 · The results show that EGR can effectively reduce the pressure rise rate and suppress knocking; it also plays a role in improving fuel economy ...
[112]
SCR Systems for Diesel Engines - DieselNet
Overview of urea-SCR systems for the reduction of NOx from mobile diesel engines, including system configuration, emission performance, urea consumption, ...Missing: $0.05-0.10 | Show results with:$0.05-0.10
[113]
The Superiority of SCR Systems Over EGR Systems in Diesel Engines
Mar 3, 2024 · Enhanced Emission Reduction: SCR systems are remarkably efficient in reducing NOx emissions, often achieving reductions of up to 90%. This level ...
[114]
Why Does SCR by DEF Increase the Efficiency of an Engine?
Aug 9, 2025 · This synergy means engines adjust DEF dosing automatically, optimizing both emissions and performance for every driving scenario. Adaptive ...
[115]
A Guide for Fleet Managers on SCR Technology - Old World Industries
Jul 20, 2020 · Post 2010 heavy-duty trucks can achieve fuel savings of around 5% compared to 2007 models with similar engine specifications; off-road machines ...<|control11|><|separator|>
[116]
[PDF] Heavy-duty vehicle diesel engine efficiency evaluation and energy ...
This work sought to further understand the engine efficiency, energy losses, and prospects for improvement in diesel engines for heavy-duty vehicles.
[117]
Effect of Exhaust Gas Recirculation Combined with Selective ... - NIH
Jun 22, 2022 · However, some research results have shown that higher EGR decreases the ignition performance and rapidly increases the brake-specific fuel ...
[118]
NOx Adsorber Applications - DieselNet
NOx adsorber catalysts (NAC), also referred to as lean NOx traps (LNT), have been a commercial NOx reduction technology on light-duty vehicles since around 2000 ...
[119]
A review on various after treatment techniques to reduce NOx ...
SCR combined with LNT provides advantages such as reduction of NH3 slip from the LNT and reduction in PGM (Precious group metals) requirements of the LNT.
[120]
[PDF] Diesel Technology Developments
The solution for diesel engines is some combination of engine-out NOX control through exhaust gas recirculation (EGR) and injection timing retard; plus NOX.
[121]
Prediction Model for Transient NOx Emission of Diesel Engine ...
This study proposes a NOx emission forecasting model based on a hybrid neural network architecture combining the convolutional neural network (CNN) and long ...Missing: CFD 2020s
[122]
Effect of Numerical Configuration on Predicted EGR Cylinder-to ...
30-day returnsApr 13, 2020 · The main objective of this work is the analysis of the influence of the numerical setup main parameters (mesh, time-step size, turbulence ...
[123]
Prediction of Transient NOx Emission from Diesel Vehicles Based ...
This paper proposes differential models for noise reductions of NO x emissions in time series. First, according to the internal fluctuation of time series, use ...Missing: 2020s | Show results with:2020s
[124]
Diesel EGR cooler fouling - Oak Ridge National Laboratory
The buildup of deposits in EGR coolers causes significant dEGRadation in heat transfer performance, often on the order of 20-30%.Missing: corrosion field trials studies
[125]
[PDF] EFFECTS OF SOOT DEPOSITION ON EGR COOLERS
ABSTRACT. Durability of EGR Cooler performance is a key issue that affects the function of EGR system as anti-pollutant device.
[126]
[PDF] Use of Ferritic SS444 in Exhaust Gas Cooling for Gasoline Engine
May 25, 2023 · According to the findings, the stainless-steel cooler outper- formed the titanium cooler in terms of anti-corrosion perfor- mance and fouling ...Missing: trials | Show results with:trials
[127]
Corrosion Behavior of Aluminum Alloy for Heat Exchanger in an ...
In this study, corrosion behavior of aluminum alloys to be used in heat exchangers in an automotive EGR system of a diesel engine was examined by ...Missing: field trials studies
[128]
(PDF) Effects of Different Exhaust Gas Recirculation (EGR) Rates on ...
Sep 18, 2025 · This paper studies the effects of different exhaust gas recirculation (EGR) rates (0%, 5%, 10%, and 15%) on the combustion, performance, and ...
[129]
Analysis on the potential of EGR strategy to reduce fuel consumption ...
Aug 7, 2025 · ... Simulation results revealed that EGR improves fuel economy by 4.6% in the hybrid powertrain during a WLTP driving cycle, 2% more than in the ...
[130]
Hybrid electric vehicle specific engines: State-of-the-art review
In this paper, recent progress in these four technologies on hybrid powertrain platforms is reviewed comprehensively. Working principles, influencing factors, ...Missing: post- | Show results with:post-