Sopwith Pup
The Sopwith Pup, officially designated as the Sopwith Scout or Type 9901, was a single-seat biplane fighter aircraft developed by the Sopwith Aviation Company for the British military during World War I.[1][2][3] Introduced in October 1916, it entered service with the Royal Naval Air Service (RNAS) and the Royal Flying Corps (RFC), earning its affectionate nickname from pilots due to its compact size relative to earlier designs like the Sopwith 1½ Strutter.[1][4][5] The aircraft played a pivotal role in aerial combat on the Western Front, home defense operations, and pioneering naval aviation experiments, with over 1,770 units produced by Sopwith and licensed manufacturers.[2][3] Developed as a lightweight scout fighter to counter the German "Fokker Scourge," the Pup featured a wooden structure with fabric covering, a sesquiplane configuration (unequal wing spans), and was powered by an 80 hp Le Rhône 9C rotary engine, though some variants used a 100 hp Gnôme Monosoupape.[4][3] Its key specifications included a wingspan of 26 feet 6 inches, a length of 19 feet 4 inches, a height of 9 feet 5 inches, a maximum speed of approximately 112 mph at sea level, a service ceiling of 17,000–18,500 feet, and an endurance of about 3 hours.[2][4][3] Armament typically consisted of a single synchronized 0.303-inch Vickers machine gun firing through the propeller arc, with some aircraft experimentally fitted with Le Prieur rockets for anti-balloon roles or a second Lewis gun on the upper wing.[2][4][3] Renowned for its exceptional maneuverability and docile handling qualities, the Pup was praised by aces like Lieutenant James McCudden, who noted it could out-turn German Albatros fighters two-to-one in dogfights.[1][3] Operationally, the first Pups arrived on the Western Front in autumn 1916, enabling British pilots to regain air superiority until mid-1917, when superior German designs like the Albatros D.III rendered it obsolete for frontline use.[1][4] It saw extensive service in RNAS and RFC squadrons, including No. 3 Naval Squadron and No. 46 Squadron, as well as with the Australian Flying Corps.[3] Beyond combat, the Pup's light weight and short takeoff/landing capabilities made it ideal for home defense against Zeppelin raids and Gotha bombers, as well as early carrier trials; on 2 August 1917, Squadron Commander Edwin Dunning achieved the first landing on a moving ship, HMS Furious, though he tragically died during a subsequent attempt.[1][4][5] Additional milestones included the first shipboard launch from an Australian warship, HMAS Sydney, on 17 December 1917, marking significant advancements in naval aviation.[2] By war's end, Pups had contributed to numerous victories, including being credited in the downing of enemy aircraft by notable pilots, though it was eventually relegated to training roles.[3]Design and Development
Background and Origins
The Sopwith Pup emerged during the height of World War I in 1915–1916, a period when the Royal Naval Air Service (RNAS) urgently sought a lightweight, agile single-seat scout aircraft to enhance reconnaissance and fighter capabilities amid the "Fokker Scourge," where German monoplanes dominated the skies.[6] The Sopwith 1½ Strutter, a versatile two-seater introduced earlier, had proven effective but was increasingly outmatched in dogfights, prompting the need for a more compact successor focused on rapid climbs and tight maneuvers for battlefield intelligence gathering.[7] This development context reflected broader RNAS priorities for aircraft that could operate from short naval decks and protect coastal installations against emerging threats.[8] The Pup's design evolved from earlier Sopwith innovations, including the 1913 Sopwith Tabloid, a lightweight two-seat sporting biplane renowned for its speed and simplicity, which influenced the Pup's wire-braced structure and biplane configuration.[8] Further inspiration came from the "Hawker's Runabout," a personal single-seat tractor biplane project initiated in 1915 for Sopwith's chief test pilot, Harry Hawker, to facilitate visits to RNAS stations; this modest design, sketched in chalk on the factory floor by chief engineer Herbert Smith, laid the groundwork for a military adaptation emphasizing portability and ease of handling.[9] In response to RNAS specifications for a compact fighter, the project incorporated an 80 hp Le Rhône 9C rotary engine to power a nimble airframe capable of superior agility.[3] Sopwith Aviation Company founders Thomas Sopwith and Fred Sigrist, drawing on their experience since establishing the firm in 1912, directed the emphasis on maneuverability over outright speed, resulting in a machine that prioritized responsive controls and low weight for effective scouting roles.[9] The aircraft's informal nickname "Pup" arose from its scaled-down resemblance to the larger 1½ Strutter, endearing it to pilots from the outset.[7]Prototype Testing and Production
The prototype Sopwith Pup, serial number 3691, conducted its first flight on February 9, 1916, at the Sopwith factory in Kingston upon Thames, with chief test pilot Harry Hawker at the controls. Hawker immediately noted the aircraft's exceptional agility and responsive handling, which set it apart from contemporaries during early evaluation flights.[10][9] Subsequent testing phases in March 1916 at the Royal Naval Air Service (RNAS) station at Upavon focused on refining performance and integrating military features. The prototype was equipped with an 80 hp Le Rhône 9C nine-cylinder rotary engine, which provided reliable power for its lightweight biplane structure. Armament trials incorporated a single 0.303 in (7.7 mm) Vickers machine gun mounted on the fuselage, synchronized via the Sopwith-Kauper interrupter gear to fire through the propeller disc without striking the blades—a critical advancement for single-seat fighters. These evaluations confirmed the Pup's maneuverability and climb rate, prompting further development.[9][10][11] The promising results led the Admiralty to issue an initial production order for 50 aircraft in early 1916, followed by additional prototypes and contracts from the Royal Flying Corps (RFC) as demand grew. By mid-1916, orders expanded to include 50 units from William Beardmore & Company and 20 from Sopwith itself, with the type entering service trials under designations like Type 9901 for the RNAS and Sopwith Scout for the RFC. Overall production scaled to 1,796 aircraft by the armistice in November 1918, reflecting the urgent wartime need for agile scouts.[8][10] To meet these contracts, manufacturing was distributed across multiple firms beyond Sopwith Aviation Company, which built only 96 examples at its Kingston works. Major subcontractors included the Standard Motor Company in Coventry (approximately 850 units), Whitehead Aircraft in Richmond (around 820 units), and William Beardmore in Glasgow (at least 30 units), with smaller contributions from builders like Ruston, Proctor and Co. Production faced logistical hurdles, including supply constraints on Le Rhône rotary engines due to high demand across Allied aircraft programs and periodic shortages of high-quality timber for the wooden fuselage and wings, which occasionally delayed assembly lines. Despite these issues, the distributed effort ensured steady output to equip frontline squadrons.[10][12][8]Key Design Features
The Sopwith Pup featured a compact single-seat biplane configuration optimized for agility in aerial combat, with a wingspan of 26 feet 6 inches (8.1 m), overall length of 19 feet 3.75 inches (5.9 m), and height of 9 feet 5 inches (2.9 m).[13] Its lightweight construction employed a fabric-covered wooden frame, primarily using spruce for spars and ribs, which contributed to an empty weight of approximately 787 pounds (357 kg) and enabled responsive handling without excessive structural complexity.[4][13] The aircraft's wings were of equal span and staggered design, forming a single-bay arrangement braced by wire in the interplane struts, which enhanced stability and roll rates. Ailerons were fitted to both upper and lower wings, eliminating the need for wing warping and providing superior maneuverability, including a notably tight turning radius that allowed pilots to out-turn larger opponents.[8] This configuration prioritized quick response over speed, reflecting Sopwith's engineering focus on pilot control in dogfights. Power came from an 80 hp (60 kW) Le Rhône 9C nine-cylinder rotary engine, mounted in the nose and driving a two-bladed wooden fixed-pitch propeller, which delivered a top speed of 112 mph (180 km/h) at sea level and a service ceiling of 17,000 feet (5,200 m).[13][4] The fixed tailskid undercarriage, with a cross-axle main gear, supported operations from rough fields, while the open cockpit offered unobstructed visibility. Armament consisted of a single synchronized 0.303-inch (7.7 mm) Vickers machine gun firing through the propeller arc via the Sopwith-Kauper constant-speed gear, with fuel capacity limited to 20 imperial gallons (91 liters) in a gravity tank for an endurance of about three hours.[4][3]Nomenclature and Variants
Naming and Nicknames
The Sopwith Pup received its official Admiralty designation as the Sopwith Scout, also known as Type 9901 after the serial number of the first production example, reflecting its role as a single-seat fighter aircraft.[8] This formal nomenclature was used in official documents to maintain a professional tone, as military authorities considered the popular nickname "Pup" undignified and unsuitable for an operational warplane.[5][14] The affectionate moniker "Pup" originated among Royal Naval Air Service (RNAS) pilots in 1916, who likened the aircraft's compact design to a playful offspring of the larger two-seat Sopwith 1½ Strutter, often referred to as its "mother."[15][11] This term captured the machine's small size and agile, responsive handling characteristics, endearing it to aviators despite the lack of manufacturer endorsement during the war.[5] Early unarmed versions employed for pilot training were simply referred to as Pups in service records, emphasizing their straightforward adaptation for instructional roles without additional formal subtypes.[14] Following the war, the "Pup" name gained widespread acceptance in aviation literature and preservation efforts, becoming the standard reference in historical accounts and museum displays that celebrated its legacy as a pioneering fighter.[11][5] This post-war adoption solidified its cultural identity, even as surviving examples were maintained by institutions highlighting early British aerial innovation.[16]Standard and Licensed Variants
The standard Sopwith Pup, designated as the Admiralty Type 9901 or Sopwith Scout, served as the baseline single-seat fighter variant powered by an 80 hp Le Rhône 9C nine-cylinder rotary engine, with a total of 1,770 units produced across multiple manufacturers including Sopwith, Whitehead Aircraft, and Standard Motor Company.[17] This configuration featured a fabric-covered wooden biplane structure with equal-span wings, a fixed wheeled undercarriage, and armament typically consisting of a synchronized forward-firing Vickers machine gun.[17] A small number of Pups were experimentally fitted with flotation gear and jettisonable undercarriage for naval trials.[11] Some standard Pups were later re-engined with a 100 hp Gnôme Monosoupape rotary for improved performance in home defense roles, involving modifications such as a vented cowling to enhance cooling.[9] The Sopwith Dove represented a post-war civil adaptation of the Pup as a two-seat trainer and sporting biplane, with 10 units constructed in 1919 featuring an extended fuselage length of 19 ft 6 in to accommodate tandem seating and a reduced wingspan of 24 ft 9.5 in with swept-back outer panels to maintain balance.[18] Powered by an 80 hp Le Rhône rotary engine, the Dove emphasized docile handling with a wide speed range from 35 to 100 mph and a low stalling speed around 50 mph, making it suitable for recreational and training flights.[18] Licensed production included the Beardmore W.B.III, built by William Beardmore and Company as a carrier-compatible variant for the Royal Naval Air Service, with 100 units manufactured starting in 1917 and featuring folding wings for compact storage along with an interchangeable undercarriage that could switch between wheeled landing gear, skis, or floats.[19] This model used a 110 hp Clerget 9Z nine-cylinder rotary engine and incorporated additional wing struts for structural rigidity during folding operations.[19] Several experimental variants of the Pup were developed but not entered into mass production, limited to prototypes and trial batches such as the installation of a 110 hp Le Rhône 9J rotary engine for enhanced power or alternative armament configurations including twin synchronized Vickers guns or an overwing Lewis machine gun.[8] These focused on testing performance improvements and synchronization gear but remained limited due to the shift toward more advanced designs like the Sopwith Camel.[8]Operational History
Western Front Service
The Sopwith Pup entered frontline service on the Western Front in late October 1916 with No. 8 (Naval) Squadron of the Royal Naval Air Service (RNAS), based at Dunkirk.[8][20] This deployment marked the aircraft's transition from trials to combat, where it quickly demonstrated superiority over contemporary German Fokker D.II and early Albatros scouts through its agile handling and responsive controls.[3] The first confirmed RNAS victory involving a Pup occurred on 9 November 1916, when Flight Sub-Lieutenant D.M.B. Galbraith of No. 8 Squadron downed an enemy aircraft near Dunkirk.[21] Prominent pilots such as Major James T.B. McCudden of No. 3 Squadron RNAS lauded the Pup's exceptional climb rate and dogfighting capabilities during early 1917 operations. McCudden, who scored multiple victories in the type, described its maneuverability as allowing it to "turn twice to an Albatros’ once," emphasizing its edge in close-quarters combat.[3] By the end of 1916, RNAS Pup-equipped squadrons had amassed at least 20 confirmed victories, contributing to over 40 enemy aircraft downed in the initial months of Western Front service across multiple units.[22] These successes helped British forces regain temporary air superiority amid the intensifying aerial battles of the Somme offensive.[23] However, the Pup's advantages waned by mid-1917 as German Albatros D.III fighters introduced superior speed, firepower, and structural integrity, outclassing the lighter British machine in prolonged engagements.[8][3] Its relatively low top speed of around 110 mph limited effectiveness in escort duties for bombers or reconnaissance aircraft, often leaving Pups vulnerable during high-altitude patrols.[8] Consequently, the type was phased out from primary Western Front roles by summer 1917, with surviving aircraft reassigned to secondary theaters.[8]Home Defence and Anti-Zeppelin Patrols
As the Sopwith Pup was gradually withdrawn from frontline service on the Western Front in mid-1917, it found a new role in Britain's Home Defence forces, where its maneuverability and reliability proved valuable against German air raids. In July 1917, No. 112 Squadron was formed at Throwley Aerodrome in Kent as a dedicated Home Defence unit equipped with Pups, followed by No. 61 Squadron at Rochford in Essex in August 1917; these were among the first squadrons specifically outfitted with the type for intercepting incoming bombers and airships. Many Home Defence Pups were up-engined with the 100 hp Gnome Monosoupape rotary to enhance climb rate and performance during nocturnal operations, often integrating with ground-based searchlights to spot intruders over the Thames Estuary and southeastern England.[8][24][14] The Pup's primary task in this theater was countering Zeppelin raids, with some aircraft modified to carry Le Prieur rockets—incendiary projectiles designed to ignite hydrogen-filled airships—mounted on the interplane struts for anti-Zeppelin patrols. Although direct attributions of airship destructions to Home Defence Pups over Britain are limited, the type contributed to the overall defensive effort; for instance, Pups from shipboard operations, such as Flight Sub-Lieutenant B.A. Smart's downing of Zeppelin L 23 (LZ 66) near Jutland on 21 August 1917 using a Pup launched from HMS Yarmouth, demonstrated the aircraft's effectiveness against such threats. By late 1917, as Zeppelin operations waned due to improved British defenses, Pups shifted focus to intercepting daylight raids by faster Gotha G.IV bombers, with No. 61 Squadron engaging a formation during the Southend raid on 12 August 1917, though without confirmed kills owing to the bombers' superior speed and altitude.[25][26][8] In addition to air defence, Pups conducted limited anti-submarine patrols over the North Sea from coastal bases, spotting U-boats and coordinating with naval vessels despite the type's modest range of around 250 miles restricting endurance. These missions often occurred at night, relying on searchlight illumination from shore stations or ships to guide pilots toward surfaced submarines. By early 1918, more than 150 Pups were in service with Home Defence units, bolstering patrols around London and key ports, but their effectiveness diminished as German tactics evolved toward higher-altitude Gotha and Riesenflugzeug raids that outpaced the Pup's ceiling of 17,000 feet.[27][28][29]Naval and Carrier Operations
The Sopwith Pup played a crucial role in early Royal Naval Air Service (RNAS) experiments with shipboard aviation, particularly aboard HMS Vindex in 1917. Folding-wing variants of the Pup were adapted for storage in the ship's hangar and deployed for anti-Zeppelin patrols over the North Sea, with wheeled undercarriages enabling deck takeoffs and landings. These modifications addressed the limited space on the converted ferry, allowing up to four Pups to be carried and launched to intercept German airships threatening British shipping lanes.[30][31] Pioneering carrier operations advanced significantly with the Pup on HMS Furious in August 1917, under the leadership of Squadron Commander Edwin Dunning. On 2 August, Dunning achieved the first successful landing of a fixed-wing aircraft on a moving ship, approaching the vessel at Scapa Flow by side-slipping his Pup onto the forward flight deck while Furious steamed at 26 knots into a 20-knot wind. This feat demonstrated the viability of recovering landplanes at sea without arresting gear, relying instead on deck handlers securing the aircraft by its wingtip lines. Tragically, Dunning perished five days later during a repeat landing attempt when his Pup's engine failed, causing the aircraft to veer off the deck and into the water.[32][33][34] The Pup also served extensively with RNAS coastal stations and seaplane carriers, including vessels like HMS Nairana and HMS Pegasus, where it conducted reconnaissance and escort duties. Floatplane variants, equipped with twin floats instead of wheeled undercarriages, were employed for anti-submarine patrols in the Mediterranean, operating from bases such as those at Mudros and Imbros to hunt U-boats threatening Allied convoys. These adaptations, tested on ships like HMS Ben-my-Chree, extended the Pup's utility in maritime environments despite its lightweight design.[35][27] Despite its innovations, the Pup's naval service revealed key limitations, including a modest operational range of approximately 200 miles and inherent deck hazards from short runways and high winds, which complicated landings on early carriers. Several Pups were lost in carrier-related accidents due to these challenges, including engine failures and deck-edge overruns. Nonetheless, the type's contributions profoundly influenced future naval aviation, spurring developments in arresting gear, flight deck design, and pilot training that shaped modern aircraft carriers.[33][8][34]Training and Post-War Roles
As frontline combat effectiveness waned by mid-1917 due to superior German fighters, the Sopwith Pup transitioned to advanced pilot training roles within the Royal Flying Corps (RFC) and later the Royal Air Force (RAF). Its docile handling characteristics made it an ideal intermediate trainer for pilots who had completed basic instruction on aircraft like the Avro 504, allowing them to practice aerobatics, formation flying, and gunnery without the risks associated with more powerful scouts. Guns were typically removed from these training variants to prioritize safety and instructional focus.[36] Specific RFC and RAF training establishments employed the Pup extensively from 1917 onward, including No. 26 Training Depot Station at Edzell, Scotland, where examples like B7575 were painted in distinctive markings for instructional use. Other units, such as those under the 23rd Training Wing at South Carlton, Lincolnshire, integrated Pups into their curricula to support the rapid expansion of British air forces, contributing to the training of thousands of pilots before the Armistice. This role persisted until November 1918, with the aircraft's reliability ensuring consistent availability for flight hours that built pilot proficiency in preparation for operational squadrons.[8][37] Following the Armistice, surviving Pups played limited roles in demobilization efforts during 1919–1920, including ferry flights to dispose of surplus aircraft and participation in early RAF civil flying displays to demonstrate peacetime aviation potential. Exports continued, with a small number supplied to the White Russian forces during the 1919 civil war; at least two were captured by the Red Army from General Wrangel's units in southern Russia and repurposed for Bolshevik operations. In Australia, twelve Pups arrived in 1919 (RAF serials C521–C532, later RAAF A4-1 to A4-12) and entered service with No. 1 Flying Training School at Point Cook, Victoria, where they supported pilot instruction until withdrawn in 1925.[38][39][40] The Imperial Japanese Navy acquired Pups for evaluation in the early 1920s, conducting takeoff trials from platforms on vessels like the seaplane tender Wakamiya and the battleship Mikasa during the Siberia Expedition; these tests assessed carrier compatibility and influenced Japanese naval aviation development. Civilian conversions of surplus Pups, often re-engined or modified for two-seat configurations, appeared in public events, such as the 1921 Aerial Derby at Hendon Aerodrome, where one example participated in races and offered joyrides to spectators, highlighting the type's enduring appeal for recreational flying.[41][10] By 1921, the Pup's obsolescence in the RAF—declared official in December 1918—led to its widespread phasing out from military inventories, replaced by more advanced types like the Sopwith Snipe. However, lingering use in peripheral roles, such as Australian training, underscored its transitional value in the interwar period, with total airframe attrition marking the end of an era for early fighter designs.[35]Operators and Legacy
Primary Military Operators
The Sopwith Pup served primarily with the armed forces of the United Kingdom, where a total of 1,770 aircraft were produced and delivered to the Royal Naval Air Service (RNAS), Royal Flying Corps (RFC), and the newly formed Royal Air Force (RAF) during World War I.[24] The type equipped frontline units such as RNAS Nos. 3, 4, 8, and 9 Squadrons, as well as RFC Nos. 46, 54, and 66 Squadrons, which deployed the Pup for fighter patrols and escort duties on the Western Front starting in late 1916.[24] Home defence roles were fulfilled by RNAS units including Nos. 37, 87, and 111 Squadrons, which operated upgraded variants with 100 hp Gnome Monosoupape engines for intercepting German bombers over Britain from mid-1917 onward.[11] In the Commonwealth, No. 1 Squadron (Canadian), part of the Royal Flying Corps, employed the Sopwith Pup on the Western Front in 1917 for fighter and reconnaissance roles. The Australian Flying Corps employed the Sopwith Pup with No. 3 Squadron during operations in Palestine from 1917 to 1918, where it supported ground forces in reconnaissance and fighter roles.[42] Post-war, eleven Pups were supplied to the Royal Australian Air Force, remaining in service for training until 1921.[43] The United States Navy operated the Sopwith Pup but did not adopt it for combat.[17] Several other nations operated limited numbers of Sopwith Pups during or immediately after World War I. Belgium's 5e Escadrille de Chasse utilized at least one example for fighter duties in 1917, marked with the unit's comet insignia.[44] Greece briefly employed the type in 1917 with the Hellenic Naval Air Service from Aegean bases, marking it as the first fighter used by Greek pilots in the conflict.[45] The Imperial Japanese Navy conducted trials with Pups aboard ships like the Wakamiya Maru in the early 1920s, evaluating deck operations.[35] In the Netherlands, the Marine Luchtvaart Dienst (MLD) incorporated interned British Pups for coastal defence patrols between 1917 and 1918.[46] Romania received one Sopwith Pup for evaluation, which entered limited service with the Romanian Air Corps before retirement. During the Russian Civil War, the Soviet Red Army captured and operated two imported Pups originally supplied to the Russian Empire, employing them against White forces in southern Russia.[47]Surviving Aircraft and Modern Preservation
The Sopwith Pup's survival into the modern era is exceptionally rare, with fewer than ten complete original examples known worldwide, a testament to the aircraft's wood and fabric construction, which is highly susceptible to environmental decay over a century. Most extant Pups incorporate original components but have undergone extensive reconstruction to maintain structural integrity against rot, UV damage, and material fatigue. Preservation efforts emphasize historical accuracy, drawing on period blueprints and wartime records to replicate authentic rigging and finishes.[6][48] Among airworthy examples, the Shuttleworth Collection in the United Kingdom maintains G-EBKY, a 1919-built Sopwith Dove converted to Pup configuration in the 1930s and marked with the prototype serial N5180. Restored to flying condition in the 1980s and fully airworthy since 1993, this aircraft is powered by a period-correct Le Rhône rotary engine and performs regularly at airshows, including displays at the 2024 Shuttleworth Military Weekend and Best of British Airshow, where its agile maneuvers highlight the type's renowned handling.[49][50][51] Another airworthy Pup, N6161, is operated by the Historic Aircraft Collection in the United Kingdom, rebuilt using the original fuselage recovered from German captivity in 1917 along with other authentic First World War-era parts. First flown post-restoration in 2016, it remains operational as of 2025 and is noted as the only fully original Pup in flight globally, often appearing at heritage events to demonstrate the scout's combat agility.[52][48][53] Static displays preserve key originals for public education. At the Museum of Army Flying in Middle Wallop, United Kingdom, N5195, a 1916 Royal Naval Air Service trainer, stands as a complete survivor, showcasing the Pup's compact biplane design and Vickers gun mounting without modifications for flight.[6][54] Similarly, the Royal Air Force Museum Cosford houses N5182, another 1916 Sopwith-built example that served on the Western Front, displayed in its wartime configuration to illustrate early fighter evolution. In Australia, the Royal Australian Air Force Museum at Point Cook maintains a 1979 replica Pup, representative of the type's training role in the post-war era, though no major restorations were reported for 2024.[6][14] Restoration projects continue to address the scarcity of intact survivors. N6161's rebuild, detailed in Roy Palmer's 2015 account and ongoing refinements through 2025, involved sourcing rare brass fittings and doped fabric to combat deterioration. At the Canadian Museum of Flight in Langley, British Columbia, a full-scale replica Sopwith Pup—built by volunteers and incorporating preserved original components like struts and instruments—features prominently in the museum's November 2025 "Airplane of the Month" exhibit, emphasizing Canadian contributions to Pup operations during the First World War. No significant archaeological recoveries of Pup wrecks have occurred since 2023, underscoring the challenges of locating buried or submerged relics amid natural degradation.[55][56][13]Specifications and Performance
General Characteristics
The Sopwith Pup was a single-seat biplane fighter aircraft designed for one pilot.[13] Its overall length measured 19 ft 3.75 in (5.89 m), with a wingspan of 26 ft 6 in (8.08 m), a height of 9 ft 5 in (2.87 m), and a wing area of 254 sq ft (23.6 m²).[57] The aircraft featured a conventional wooden structure consisting of a braced frame covered in fabric, typical of early World War I designs.[8]| Characteristic | Specification |
|---|---|
| Empty weight | 787 lb (357 kg) [58] |
| Gross weight | 1,225 lb (556 kg) [13] |
| Fuel capacity | 20 imp gal (24 US gal; 91 L) [59] |