Fact-checked by Grok 2 weeks ago

PPS submachine gun

The PPS submachine gun is a family of compact, lightweight Soviet submachine guns chambered in 7.62×25mm Tokarev, designed by engineer Alexei I. Sudayev in 1942 during the Siege of Leningrad as a low-cost alternative to the PPSh-41 for personal defense by tank crews, artillerymen, and support personnel.^[1]^[2] The initial PPS-42 model evolved into the more refined PPS-43 variant in 1943, featuring simplified stamped sheet metal construction for rapid mass production under wartime constraints, a side-folding metal stock, a 9.6-inch (243 mm) barrel with four right-hand grooves, and a 35-round detachable box magazine, resulting in an overall length of 32.25 inches with stock extended (reducing to 24.2 inches (615 mm) folded) and a weight of 6.7 pounds (3.04 kg) unloaded.^[3]^[2]^[4] It fired at a cyclic rate of approximately 600 rounds per minute with effective range up to 200 meters, emphasizing reliability in harsh conditions and ease of manufacture requiring only 2.7 hours of machining per unit using minimal metal.^[3]^[4] Approximately 2 million PPS-43 units were produced between 1943 and 1946 across Soviet factories, becoming the third standard submachine gun of the Red Army and seeing widespread combat use on the Eastern Front during World War II, as well as post-war adoption by various Eastern Bloc and proxy forces.^[4]^[1] Its design influenced later stamped-metal submachine guns worldwide, noted for balancing firepower, portability, and industrial efficiency in total war scenarios.^[2]

History and development

Origins in World War II

The Soviet Union entered World War II on June 22, 1941, when Nazi Germany launched Operation Barbarossa, a massive invasion that rapidly overwhelmed Soviet defenses and created an urgent demand for submachine guns to equip infantry in close-quarters combat.^[5] The German advance exposed vulnerabilities in Soviet armament, particularly the need for lightweight automatic weapons to counter the blitzkrieg tactics and bolster defensive lines amid heavy losses.^[6] The siege of Leningrad began on September 8, 1941, when German forces severed land connections to the city, isolating it and causing severe resource shortages that hampered industrial production.^[7] Factories in the besieged city faced acute shortages of raw materials, fuel, and machinery, necessitating the development of weapons that required minimal machining and could be fabricated quickly using stamped metal and simple tools to sustain the defense.^[8] The existing PPSh-41 submachine gun, introduced as the primary Soviet automatic weapon, weighed 3.6 kg, measured 843 mm in length, and relied on a 71-round drum magazine prone to jamming and difficult field maintenance, prompting demands for a lighter, cheaper alternative better suited to mass production under wartime constraints.^[9] In late 1941, Leningrad engineer Alexei Sudayev, who had recently defended his diploma project on small arms design, was tasked with creating a simplified personal defense weapon for tank crews, artillerymen, and support troops to address these shortcomings.^[10]

Prototypes and production

The PPS-42 prototype was developed in 1942 by Soviet designer Alexei Sudayev amid the Siege of Leningrad, based on earlier prototypes by Lieutenant I.K. Bezruchko-Vysotsky, and featuring a combination of stamped and machined metal components that required relatively precise tooling for assembly.^[10] This design, while functional, was deemed unsuitable for mass production under wartime constraints due to its dependence on machining operations that strained limited resources in besieged factories.^[10] Approximately 46,000 units of the PPS-42 were manufactured between 1942 and 1943, primarily at Leningrad's Factory No. 209, before trials revealed the need for further simplification.^[10] In early 1943, Sudayev refined the design into the PPS-43, prioritizing stamped steel construction for over 80% of its components to minimize machining and enable rapid output in resource-scarce conditions.^[3] This iteration reduced production time to about 2.7 man-hours per unit, compared to approximately 7.3 man-hours for the PPSh-41, allowing for efficient assembly using basic stamping presses even during the ongoing siege.^[4] The Red Army officially adopted the PPS-43 in 1943, marking it as a key wartime personal defense weapon.^[4] Mass production of the PPS-43 ramped up across multiple Soviet factories, with Leningrad facilities like Factory No. 209 contributing significantly despite bombardment and shortages; over 2 million units were produced between 1943 and 1945, comprising the bulk of output.^[4] Manufacturing continued postwar until 1946, with total Soviet production estimates exceeding 2 million PPS-43 models alongside the earlier PPS-42 variants, though exact figures vary due to wartime record disruptions.^[4]

Adoption and wartime role

The PPS-43 submachine gun was officially adopted by the Red Army in 1943 as a secondary weapon, serving as a compact personal defense arm to complement the heavier PPSh-41, which remained the primary submachine gun for frontline assault units.^[2] This adoption followed the initial limited production of the PPS-42 variant in late 1942, primarily for units in the besieged Leningrad region, and reflected the Soviet military's need for a lighter, more easily manufactured firearm amid ongoing resource shortages.^[4] The weapon's design simplifications, such as extensive use of stamped metal parts, enabled rapid scaling of output to meet these demands without diverting critical manufacturing capacity from rifles or other essentials.^[3] Issued preferentially to non-frontline personnel due to its folded-stock length of just 615 mm, the PPS-43 was distributed to tank crews for vehicle defense, engineers for construction and demolition tasks, and partisan groups operating behind enemy lines, where its portability and low weight of 3 kg proved advantageous in confined or mobile operations.^[2]^[11] Although not envisioned as a standard infantry weapon, the PPS's straightforward production process—requiring minimal machining and only 6.2 kg of steel per unit—resulted in over 2 million examples entering service by war's end, making it far more widespread than initially planned.^[3]^[4] Tactically, the PPS-43 bolstered Soviet capabilities in close-quarters engagements and urban fighting, offering reliable automatic fire at ranges up to 100 meters with its 35-round box magazine, which supported suppressive roles in defensive positions.^[2] It played a notable part in key defensive battles, such as those around Leningrad, where local production directly armed encircled troops, and Stalingrad, where its maneuverability aided house-to-house combat against German forces.^[3] Logistically, its chambering in the standard 7.62×25mm Tokarev cartridge ensured seamless integration with existing Red Army small-arms supplies, simplifying ammunition distribution across diverse units.^[4] The weapon's first major combat deployments occurred in late 1943 during Soviet offensives to liberate Ukraine, where frontline reports highlighted its durability and consistent performance in muddy, freezing conditions that often jammed more complex designs.^[2] This reliability, combined with minimal maintenance needs, quickly established the PPS-43 as a doctrinal staple for secondary roles, enhancing overall infantry flexibility without overhauling established tactics centered on the PPSh-41.^[11]

Design

Operating mechanism

The PPS submachine gun employs a simple blowback operating mechanism, firing from an open bolt without a locked breech, where the recoil from the fired cartridge provides the energy to cycle the action by pushing against the bolt face via the inertia of the empty case.^[12]^[13] This design relies on the mass of the cylindrical bolt and the tension of the recoil spring to manage the high-pressure 7.62×25mm Tokarev cartridge, ensuring reliable operation in adverse conditions without complex locking components.^[12]^[13] In the firing sequence, the bolt is held in the rearward, open position by the sear when ready to fire.^[12] Upon pulling the trigger, the sear releases the bolt, allowing it to travel forward under spring tension, strip a round from the magazine, chamber it, and strike the fixed firing pin on the bolt face to ignite the primer, firing the weapon while still in battery.^[12] The subsequent gas pressure propels the bullet down the barrel while simultaneously driving the bolt rearward, extracting and ejecting the spent case through a port on the right side of the receiver; the bolt then compresses the recoil spring before being caught by the sear in the open position for the next cycle in full-automatic mode.^[12]^[13] The safety mechanism consists of a basic lever positioned on the front of the trigger guard, which blocks the trigger when moved rearward to the "safe" position and allows firing when pushed forward, with the open-bolt configuration inherently preventing accidental discharge by ensuring no round is chambered until the trigger is pulled.^[12] The weapon operates in full-automatic fire only, without a semi-automatic option in the standard design.^[12]^[13] The cyclic rate of fire is approximately 500-600 rounds per minute, moderated primarily by the bolt's mass and the recoil spring's tension to balance controllability and reliability during sustained bursts.^[12]^[13] It is chambered for the 7.62×25mm Tokarev pistol cartridge, achieving a muzzle velocity of about 500 m/s from its 250 mm barrel, which provides effective short-range performance suitable for close-quarters combat.^[12]^[13]

Construction and features

The PPS submachine gun was constructed primarily from stamped sheet steel to facilitate mass production with minimal machining, enabling rapid wartime manufacturing. The receiver, barrel shroud, and pistol grip were all formed from this sheet metal, contributing to the weapon's lightweight and rugged build. A perforated metal heat shield surrounded the barrel for protection, while the foregrip was typically integrated as the magazine well, though some production variants incorporated wooden elements for added grip comfort. The folding stock consisted of a simple wire frame, further emphasizing the design's simplicity and portability.^[2]^[14] Key dimensions included an overall length of 820 mm with the stock extended and 615 mm when folded, alongside a 250 mm barrel length, making it compact for close-quarters use by paratroopers and vehicle crews. The weapon weighed 3.04 kg unloaded (3.67 kg loaded with a standard 35-round magazine), balancing portability with sufficient ammunition capacity. This underfolding wire stock tucked beneath the receiver, reducing the length by approximately 25% for enhanced maneuverability in confined spaces.^[2]^[14]^[15] The feeding system employed a 35-round double-stack, single-feed box magazine, curved to conform to the receiver's shape and improve reliability over the drum magazines of predecessors. These magazines were distinct from those of the PPSh-41 and optimized for smoother feeding in the PPS's simpler mechanism.^[2]^[14]^[16] Durability was a core feature, with the design rated for operation in temperatures from -40°C to +50°C, suitable for diverse combat environments. A corrosion-resistant phosphate finish protected the steel components from rust, and field disassembly required no specialized tools beyond a basic punch for the recoil spring, allowing quick maintenance under field conditions. The blowback operating principle further supported this stamped construction by minimizing the need for precision-machined parts.^[14]

Sights and ergonomics

The PPS submachine gun is equipped with simple iron sights optimized for close-quarters combat, consisting of a fixed front post and a flip-up rear notch sight graduated to 100 and 200 meters.^[17] These non-adjustable sights prioritize rapid target acquisition at ranges under 100 meters, reflecting the weapon's design for defensive roles in confined environments.^[2] The effective firing range is approximately 100–150 meters for point targets and up to 200 meters for area targets, constrained by the ballistics of the 7.62×25mm Tokarev pistol cartridge.^[11] This limitation underscores the PPS's suitability for short-range engagements rather than precision shooting at longer distances.^[1] Ergonomically, the weapon features a stamped-metal pistol grip augmented with grooved wooden or bakelite panels to enhance user control during firing.^[18] The trigger mechanism delivers a pull weight of about 3–4 kg, facilitating quick activation in high-stress scenarios.^[14] Overall balance supports swift shouldering when the folding wire stock is extended, while the stock's compact fold enables holster-like carry for mobility.^[2] Handling characteristics include manageable recoil, attributable to the PPS's distributed weight of around 3 kg and the moderate energy of the 7.62mm cartridge, allowing sustained fire without excessive muzzle rise.^[14] Accessories are minimal, comprising basic sling attachment points on the receiver and stock, with the original design lacking provisions for optics or suppressors to maintain simplicity and production efficiency.^[1]

Variants

Soviet models

The PPS-43, introduced in 1943 as the primary Soviet production model of the Sudayev submachine gun series, served as a lightweight, stamped-metal personal defense weapon chambered exclusively in 7.62×25mm Tokarev pistol ammunition throughout its service life, with no caliber variants adopted in Soviet forces. It utilized a 35-round double-stack, single-feed curved box magazine compatible with PPSh-41 magazines, emphasizing simplicity and rapid wartime manufacturability through pressed steel construction. The design lacked a crossbolt safety mechanism, relying instead on a basic lever selector on the front of the trigger guard to lock the bolt open or closed for safe carry, preventing accidental discharge when slung.^[19] Production prioritized speed and volume, occurring at key facilities including the Sestroretsk Arsenal in Leningrad (under siege conditions) for early production and primarily Factory No. 828 in Moscow, with approximately 46,572 early transitional units (from the related PPS-42 prototype) completed in 1943 alone as full-scale output ramped up.^[20]^[4]^[2]^[11] Following World War II, Soviet production of the PPS-43 continued briefly into 1946, yielding a total of around 2 million units across all variants, but no major redesignated models like a dedicated PPS-43/52 emerged in USSR service; minor experimental tweaks, such as improved barrel rifling for enhanced accuracy (four right-hand grooves with a 1:240mm twist), were tested but not standardized for mass output. The post-war emphasis shifted away from submachine guns due to stockpiles exceeding needs, leading to discontinuation by 1946 in favor of reserves and limited exports. By the late 1950s, the PPS-43 was phased out of frontline Soviet doctrine, supplanted by the more versatile AK-47 assault rifle, which offered greater range and power with its intermediate cartridge.^[4]^[20]^[21]

Foreign copies and derivatives

The Chinese Type 54 submachine gun, produced by Norinco starting in 1954, is a near-identical licensed copy of the Soviet PPS-43, retaining its stamped metal construction, blowback operation, and 7.62×25mm Tokarev chambering while incorporating a safety mechanism similar to later PPS variants. Large quantities were manufactured for the People's Liberation Army and exported to allied nations. These weapons provided reliable close-quarters firepower in post-war conflicts alongside Soviet models.^[22] Poland initiated licensed production of the PPS-43 as the wz. 43 (also designated PM wz. 43) in 1948 at the Łucznik Arms Factory in Radom, introducing minor ergonomic modifications such as an altered pistol grip for improved handling and a fixed wooden stock in the wz. 43/52 variant to enhance durability and reduce manufacturing complexity. Approximately 111,000 units were produced until 1955, after which it was gradually replaced by the more modern PM-63 submachine gun. The wz. 43 remained a staple in Polish service during the early Cold War, valued for its simplicity and low-cost production.^[20]^[23]^[24] During the Continuation War (1941–1944), Finland captured numerous PPS-43 submachine guns from Soviet forces and developed an unofficial copy known as the KP m/44 (or M/44), chambered in 9×19mm Parabellum to utilize existing Suomi KP/-31 magazines and improve controllability with the less powerful round. This adaptation featured reworked internals for compatibility with Finnish ammunition and production tooling, but only limited numbers were manufactured postwar due to the war's end and shifting priorities toward rifles. The KP m/44 exemplified Finland's pragmatic approach to wartime logistics by repurposing enemy designs for domestic needs. (Note: YouTube video by Forgotten Weapons, a reputable firearms history channel) In modern times, U.S. importer Pioneer Arms has facilitated the production of semi-automatic replicas of the PPS-43 in Poland as the PPS-43C, configured as a pistol with a shortened barrel and closed-bolt operation to comply with civilian regulations, chambered in either 7.62×25mm Tokarev or 9×19mm Parabellum. These replicas, introduced around 2017, are marketed primarily to collectors and enthusiasts for the civilian market, preserving the original's compact design while omitting full-automatic capability.^[25]

Operational history

World War II service

The PPS submachine gun entered service with the Red Army in mid-1943, with initial deployments occurring late that year on the Eastern Front, where its compact design proved advantageous for NKVD border guards and partisan detachments engaged in urban and forested combat environments.^[26] Local production in besieged Leningrad had already supplied limited numbers to the Leningrad Front earlier in the year, allowing for testing in defensive actions amid harsh winter conditions.^[11] In key engagements, the PPS saw widespread use in late-war offensives on the Eastern Front, supporting close-quarters infantry assaults.^[27] Its simplicity enabled rapid distribution to forward units, contributing to the fluid, high-mobility warfare of the late Eastern Front campaigns. The weapon's performance was marked by exceptional reliability in the mud, snow, and extreme cold of the Eastern Front.^[28] This bolstered Soviet squad-level tactics, where submachine guns like the PPS were used for suppressive roles in assaults, enhancing overall infantry volume of fire without requiring extensive maintenance.^[17] Despite these strengths, the PPS's effective range of about 100-200 meters and 35-round box magazine limited it to suppressive and close-range applications rather than sustained or precise engagements, often necessitating reliance on rifles for longer distances. By the end of the war, approximately 800,000 units had been produced and fielded.^[20] Partisan units in occupied Belarus and Ukraine frequently used the PPS for covert operations in rear areas.^[29]

Post-war and modern conflicts

Following World War II, the PPS submachine gun and its copies continued to see action in several major conflicts, often supplied through Soviet or Chinese aid to communist forces. It was used during the Chinese Civil War (1945-1949) by Communist forces. In the Korean War (1950–1953), the Chinese Type 54 variant—a direct copy of the Soviet PPS-43—was widely used by the People's Volunteer Army in close-quarters and trench fighting along the front lines. Its compact design suited the static warfare of the conflict, and UN forces captured numerous examples, some of which were evaluated for potential adoption.^[2]^[22] During the Vietnam War (1955–1975), North Vietnamese Army troops and Viet Cong guerrillas employed Soviet PPS-43s and Chinese Type 54 copies for ambushes and patrols in dense jungle terrain. The weapon's simple stamped-steel construction proved reliable in the region's high humidity and rough conditions, allowing it to remain in service despite the prevalence of assault rifles. Examples were frequently captured by U.S. and allied forces.^[2]^[30] By the 1980s, the PPS had been largely phased out from active frontline roles in Soviet and Warsaw Pact inventories, supplanted by the more versatile AK-series assault rifles that offered greater range and intermediate cartridge power. It persisted in reserves and storage depots across former communist states, however, leading to sporadic re-emergence in 21st-century conflicts from old caches. In the Russo-Ukrainian War starting in 2022, Ukrainian forces reactivated WWII-era PPS-43s amid ammunition shortages for modern weapons, with open-source imagery confirming their use on both sides (as of 2022).^[2]^[31]

Users

Primary military operators

The PPS submachine gun was primarily adopted by the Soviet Union in 1943 as a lightweight, cost-effective personal defense weapon for the Red Army during World War II. Production of the PPS-43 began that year at Soviet factories including those in Moscow, with approximately 2,000,000 units manufactured across Soviet factories by 1946, when output ceased due to an oversupply of submachine guns in the post-war inventory.^[32]^[11] The weapon remained in limited service with Soviet forces through the 1950s, serving infantry and support units until gradually replaced by the Avtomat Kalashnikova assault rifle.^[33] In China, the People's Liberation Army adopted the Type 54, a licensed copy of the PPS-43, in 1954 as part of efforts to standardize small arms production following Soviet technical assistance.^[34] The Type 54 equipped PLA infantry and security forces through the Korean War era and into the 1980s, with manufacturing concentrated at state arsenals like those in Factory 66 until phasing out in favor of modern designs.^[22] Czechoslovakia produced a licensed copy known as the vz. 48 starting in 1948, which equipped the Czech Army and security forces until the 1950s.^[23] Poland's armed forces received the PPS-43 in 1943 for use by the Polish People's Army fighting alongside Soviet units in World War II.^[25] Domestic production commenced in 1946 under the designation wz. 43 at facilities such as the Łódź metalworks, supplying the post-war Polish military with an estimated tens of thousands of units issued to infantry squads until the 1960s.^[25]^[35] Romania adopted the PPS-43 through Soviet aid and began manufacturing copies designated md. 43 in 1953, which saw service with Romanian forces through the Cold War era.^[14] The Korean People's Army incorporated Soviet-supplied PPS submachine guns and Chinese Type 54 variants starting in the late 1940s, employing them as a standard secondary weapon for reserve and second-line troops through the Korean War and beyond.^[36] North Vietnam adopted the PPS in the 1950s through Soviet military aid packages, with the weapon seeing widespread issue to regular and irregular forces during the First Indochina War and the Vietnam War, where it provided close-quarters firepower in jungle operations.^[37]

Other state and non-state users

During World War II, Yugoslav partisans received the PPS-43 as part of Soviet military aid to support their resistance against Axis forces. These submachine guns supplemented captured and locally produced weapons in the aftermath of the war, aiding in securing partisan-held territories until the establishment of the Yugoslav People's Army in 1945. Captured PPS-43 submachine guns were utilized by the Finnish Army during the Continuation War against the Soviet Union from 1941 to 1944. Finnish forces seized several hundred units from Soviet troops, particularly in summer 1944 offensives, and integrated them into frontline service due to their reliability in harsh conditions. Post-war, the remaining captured examples were stored in depots with limited issuance to reserve units through the 1950s. The weapons' stamped-metal construction influenced Finland's development of the similar KP/-44 submachine gun.^[38]^[39] In the 1990s, Chechen rebels during the First and Second Chechen Wars produced improvised submachine guns under the Borz designation, derived from the Armenian K6-92 which itself copied the PPS-43 design. These low-cost weapons, chambered in 9×18mm Makarov, were manufactured in small numbers using basic machine tools and favored for urban combat in Grozny due to their compact folding stock and high rate of fire. The Borz provided essential close-quarters firepower for irregular forces facing superior Russian equipment.^[40] African militias employed the PPS-43 in various civil conflicts, including during the Angolan Civil War (1975–2002), where Soviet-supplied or captured examples circulated among factions like UNITA through surplus channels from Eastern Bloc allies. The weapon's simplicity made it suitable for guerrilla operations in rugged terrain. Similar use occurred in neighboring conflicts, such as the First Liberian Civil War (1989–1997), where militias wielded PPS-43s in ambushes and village raids.^[41] Insurgent groups in Iraq during the 2000s insurgency and in Syria from the 2010s civil war occasionally utilized surplus PPS-43 submachine guns sourced from black-market or battlefield captures. These vintage weapons appeared in urban fighting caches, valued for their availability in 7.62×25mm Tokarev ammunition stocks from former Soviet arsenals. As of 2025, demilled PPS-43 units are prevalent in collectors' markets worldwide, often sold as parts kits or semi-automatic pistols like the Polish-made PPS-43C in 9mm. In the United States, civilian ownership of these semi-automatic variants has increased since the late 2010s, with no new full-automatic imports due to federal restrictions, though pre-ban examples remain rare among licensed collectors. Active production of the original design ceased decades ago, limiting supply to surplus stocks.^[42]^[25]^[43]

References

[1]
PPS 43 submachine-gun | Imperial War Museums
It had its origins in the PPS 42, a submachine-gun designed by A I Sudaev and produced under his personal supervision in the besieged city of Leningrad.Missing: specifications credible
[2]
PPS-42 / PPS-43 Submachine Gun (SMG) - Military Factory
Page details technical specifications, development, and operational history of the PPS-42 / PPS-43 Submachine Gun (SMG) including pictures.
[3]
PPS SMG - WW2 Weapons
The PPS SMG, a Soviet sub-machine gun (PPS-42 and PPS-43), was designed during the Siege of Leningrad, and was the third standard Red Army sub-machine gun. It ...Missing: credible | Show results with:credible
[4]
PPS Submachine Gun | World War II Database
Among the key reason was that a PPS submachine gun required only 2.7 hours of machining using 6.2 kilograms of metal, the latter of which represented half of ...
[5]
Operation Barbarossa | History, Summary, Combatants ... - Britannica
Sep 29, 2025 · Operation Barbarossa, during World War II, code name for the German invasion of the Soviet Union, which was launched on June 22, 1941.
[6]
What Was Operation 'Barbarossa'? - Imperial War Museums
On 22 June 1941 Hitler launched Operation 'Barbarossa', the invasion of the Soviet Union. It was the beginning of a campaign that would ultimately decide ...
[7]
https://www.britannica.com/event/Siege-of-Leningrad
[8]
Leningrad 1941-43 - Key Military
Jan 12, 2022 · As Axis forces closed on Leningrad at the end of August 1941 there was a shortage of many weapons types in the city, including anti-tank guns, ...
[9]
PPSh-41 Submachine Gun | World War II Database
PPSh-41 Submachine Gun ; Capacity, 71 rounds ; Length, 843.000 mm ; Barrel Length, 269.000 mm ; Weight, 3.630 kg ; Rate of Fire, 900 rounds/min.<|separator|>
[10]
Born in the Heart of Besieged Leningrad: the PPS-42
Nov 11, 2022 · An answer came from young designer Aleksey Sudaev with a completely-stamped gun that used about half the raw material and a third the machine time to produce ...Missing: 1941 | Show results with:1941
[11]
The PPS-43 - Soviet Reenacting
The PPS-43, designed by Sudayev, is a lightweight, fully automatic submachine gun with a folding stock, 35 round magazine, and a 7.62x25mm caliber. It was ...Missing: credible | Show results with:credible
[12]
PPS43 - HERO OF LENINGRAD - Small Arms Review
Oct 1, 2004 · ... military history. It was highly regarded then, and is considered now, to be a legendary weapon of a bloody World War. PPS43 Specifications.
[13]
[PDF] The PPD-40, PPSh-41, and PPS-43 - DTIC
Apr 26, 1974 · The barrel of a submachine pun is lonrtr \;han that of o Pistol. In this manner the bullet-s muzzle velocity i increased, and fire at battle ...
[14]
The Soviet PPS-43 Submachine Gun - Small Arms Review
Feb 1, 2014 · Prior to the outbreak of World War II, the Soviets had several of their weapon designers working on a suitable submachine gun for the army.
[15]
PPS-43 Submachine Gun: Budget Soviet Firepower - Guns.com
Jul 9, 2021 · The PPS-43 became a staple submachine gun for Soviet troops in World War II. This simple design helped turn the tide, and now civilian ...Missing: origins | Show results with:origins
[16]
PPS: submachine gun for total war - Military Review
Feb 16, 2019 · In 1942, A. Sudayev developed a weapon that would later be called the best submachine gun of the Great Patriotic War.
[17]
PPS Sudaev submachine gun - m9130.info
In 1943-1945 factory produced approximately 530,000 PPS-43 SMG's, this is almost 65% of the total PPS-43 produced (for 6 factories). During the first ...
[18]
https://en.topwar.ru/153905-pps-pistolet-pulemet-dlja-totalnoj-vojny.html
[19]
WWII submachine guns at “Gun City, PRC” 1950 – 1956
Aug 16, 2023 · Production began and by June 1953, the PPS-43 clone's production was at a level that the tapering-down of Type 50 production could begin.
[20]
Submachine Gun (SMG) - PM wz. 43/52 - Military Factory
43/52 for the civilian market appeared in 2010 as the "PPS-43C". From the period of 1952 until 1955, the Lucznik Arms Factory of Radom, Poland pushed out over ...
[21]
The PPS-43C Returns To The U.S. Market - Firearms News
Dec 18, 2017 · Mass production began in 1943 at the Sestroryetsk Arsenal, with more than 45,000 being produced before production switched over to an improved ...Missing: details | Show results with:details<|separator|>
[22]
https://wwiiafterwwii.wordpress.com/2023/08/16/wwii-submachine-guns-at-gun-city-prc-1950-1956/
[23]
Made in USSR: Effective Soviet Small Arms During WWII
Sep 29, 2018 · PPS-43, created by the designer Alexei Sudayev, was one of the simplest and most reliable Soviet submachine guns. This weapon was produced in ...
[24]
How effective was the PPS 43? - Quora
Feb 17, 2021 · Soviet production figures for 1942 indicate that almost 1.5 million units were produced. The PPSh-41 is a classic example of a design ...<|separator|>
[25]
3 episodes when Soviet partisans did the impossible during WWII
May 9, 2019 · During WWII, Soviet partisans were capable of much more than only minor sabotage and small ambushes. They even paralyzed the whole German transport system.Missing: silenced PPS Belarus
[26]
PPS 43 Sub-machine Gun | Australian War Memorial
Pressed metal construction receiver with a drilled barrel cover and folding butt. Markings engraved on the receiver top are a 'C' over '1944 B111' and the ...Missing: sights ergonomics specifications<|control11|><|separator|>
[27]
Weapons of the Afghan dushmans. Revolvers, pistols and ...
Mar 6, 2022 · The Afghan army received quite significant volumes of Soviet small arms: pistols, submachine guns, magazine rifles and carbines, light, heavy and heavy machine ...
[28]
Age old weapons shaping Russia-Ukraine war, here is the list
Apr 7, 2022 · PPS 43, the successor of iconic Russian SMG PPSH, is also being used by both sides. Images accessed through OSINT confirmed their active usage ...
[29]
PPS 43 | Imperial War Museums
Description. Physical description. PPS 43 SMG, black paint finish. Label. The Soviet PPS 43 has been hailed as the best submachine- ...<|separator|>
[30]
PPS-43 7.62mmTokarev sub machine gun
Original name, : PPS-43 Russian: ППС – “Пистолет-пулемёт Судаева” or “Pistolet-pulemyot Sudayeva”, in English “Sudayev's submachine-gun”. 02. Other official ...
[31]
Russian Ammunition Industry - GlobalSecurity.org
Jul 10, 2025 · In 1942, a new modification was proposed - PPSh-42, a slightly modified form, but the PPS-43 won the competition, which, along with the PPSh ...
[32]
Top 5 Submachine Guns Used by China's Military and Police
Submachine guns produced in China were copies of foreign designs, such as the 7.62x25mm Type 50 and Type 54, which were licensed copies of the Soviet PPSh-41 ...
[33]
[PDF] The Military Technology of the Polish People's Army, 30 Years of ...
Dec 20, 1983 · PPS automatic pistol (43), 18. rifle. 7(91/30) and sniper rifle (91 ... The cistern production of the Soviet Union saved the situation ...<|control11|><|separator|>
[34]
NORTH KOREAN SMALL ARMS (DEMOCRATIC PEOPLE'S ...
Jun 1, 2012 · Until the 1980s, North Korea's military used the Type 64 and the Type 70 for high-ranking officers and the Type 68 for others who need sidearms.
[35]
How the North Vietnamese army modified a WW2 submachine gun ...
Feb 20, 2020 · The basis for the weapon was the Chinese Type 50, a blowback, open bolt submachine gun, but with its heat shield cut back three inches and faired into the ...Missing: PPS | Show results with:PPS
[36]
M44 Submachine Gun: Finland Copies the Soviet PPS-43
Nov 17, 2021 · The kp/31 Suomi submachine gun in Finnish service was an outstanding weapon, but it was slow and expensive to manufacture.
[37]
FINNISH ARMY 1918 - 1945: MACHINEPISTOLS PART 2
May 27, 2023 · M/34-38 PPD submachine gun with 73-round drum magazine. While early version had similar barrel jacket as in M/34 PPD the late version had this same kind of ...
[38]
K6-92 / Borz - Modern Firearms
The submachine gun is one of the simplest automatic arms to design and manufacture, so Armenian engineers quickly developed a straightforward weapon, which can ...
[39]
Child Soldier armed with a PPS-43 during the First Liberian Civil War
Oct 9, 2024 · 527 votes, 14 comments. Poor kid A "child soldier" shouldn't even exsist.What gun is this Angolan insurgent holding? : r/Firearms - RedditCaptured Weapons in Angola in the early 70s. Note the large ...More results from www.reddit.com
[40]
WW2/old Weapons found in weapon caches/ in use by Insurgents ...
Jul 17, 2022 · There was a video a few years ago from Syria that showed a shipping container full of German ww2 small arms and ammo that some insurgents had been using.Iraq. US troops with PPSh [800 x 696] : r/MilitaryPorn - Redditr/insurgency - Fuck it, big weapons thread. Comment what ... - RedditMore results from www.reddit.com
[41]
https://wwiiafterwwii.wordpress.com/2022/08/27/wwii-weapons-in-liberia/
[42]
PPS 43 New and Used Price, Value, & Trends 2025
The new value of a PPS 43 pistol has risen $89.57 dollars over the past 12 months to a price of $715.13 . The used value of a PPS 43 pistol has risen $125.73 ...