Sopwith Triplane
The Sopwith Triplane was a single-seat triplane fighter aircraft designed and manufactured by the Sopwith Aviation Company for the Royal Naval Air Service during the First World War, renowned for its exceptional maneuverability, rapid climb rate, and superior visibility provided by its three narrow-chord wings.[1][2] Introduced operationally in late 1916, it achieved notable success in aerial combat, with around 100 confirmed enemy aircraft downed by RNAS pilots before being phased out in favor of more advanced designs like the Sopwith Camel by mid-1918.[1][3] Development of the Triplane began in early 1916 as an evolution of the successful Sopwith Pup biplane, with the prototype (N500) making its maiden flight on 28 May 1916 at Brooklands aerodrome near London.[1] The design emphasized agility over speed, incorporating a sesquiplane-like arrangement of three wings to enhance lift and control without increasing overall wingspan, powered by a nine-cylinder Clerget 9Z rotary engine rated at 110 horsepower (later upgraded to 130 hp in some variants).[3][2] Armament typically consisted of a single synchronized 0.303-inch Vickers machine gun firing through the propeller arc, though some aircraft were fitted with twins for increased firepower; defensive measures were minimal, relying on the pilot's skill in dogfights.[1] In service, a total of 147 Triplanes were produced between 1916 and 1917, all allocated to the Royal Naval Air Service, with limited exports to allies including France (17 aircraft), Greece (1), and Russia (1).[1] The type excelled in the hands of elite squadrons on the Western Front, most famously No. 10 Naval Squadron's "Black Flight," led by ace Raymond Collishaw, which claimed 87 German aircraft victories between May and July 1917 alone, earning the Triplane its affectionate nickname "Tripe" or "Tripehound" among pilots.[2][3] Its captured examples profoundly influenced German designers, directly inspiring the Fokker Dr.I triplane flown by Manfred von Richthofen, though the Sopwith's rotary engine and lightweight construction (empty weight of 1,100 pounds, maximum takeoff weight of 1,541 pounds) gave it advantages in turning fights despite a top speed of only 117 mph and a service ceiling of 20,500 feet.[3][2] Post-war, surviving airframes served briefly as trainers before the type faded into obsolescence, remembered today as a pivotal innovation in fighter aviation that bridged biplane and more complex multi-wing designs.[1]Development
Background and conception
In early 1916, amid the ongoing "Fokker Scourge"—a period of German air superiority from late 1915 to spring 1916 driven by the Fokker Eindecker's synchronized machine gun and structural advantages—the Sopwith Aviation Company's experimental department launched a private venture to develop a new single-seat fighter. This initiative responded to urgent Royal Naval Air Service (RNAS) demands for an aircraft capable of superior climb rates and maneuverability to restore Allied control of the skies, as British pilots faced heavy losses against the nimble German monoplanes.[4] Chief designer Herbert Smith headed the project and drew inspiration from the company's successful Pup biplane, which had just entered service but offered limited pilot visibility and agility in dogfights. To address these shortcomings, Smith conceived a triplane configuration with narrow-chord wings stacked closely together, providing the lift equivalent of a larger biplane while keeping the overall height low to improve the pilot's forward and upward view. This layout emphasized enhanced roll rates and stability without increasing the aircraft's span or complexity, prioritizing agility for close-quarters combat.[5] Funded entirely as a private venture by Sopwith, the design process advanced rapidly with initial sketches completed in spring 1916, reflecting the company's experimental expertise and the wartime imperative for quick innovation. Smith's focus on functional ailerons across all three wings further optimized the triplane's responsive handling, setting it apart from contemporary biplane fighters.[4]Prototyping and first flight
The Sopwith Triplane prototype, designated N500, was constructed in early 1916 at the Sopwith Aviation Company's facilities in Kingston upon Thames, utilizing a conventional wood and fabric structure with three narrow-chord wings stacked vertically to enhance lift and maneuverability. This design emerged as a response to escalating German aerial threats, building on Sopwith's prior biplane experiments.[6] Powered by a 110 hp Clerget 9Z rotary engine, the aircraft featured a compact fuselage and ailerons on all three wings, completing assembly by late May 1916.[7] The prototype's maiden flight occurred on 28 May 1916 at Brooklands Aerodrome, piloted by Sopwith's chief test pilot Harry Hawker, who immediately demonstrated the aircraft's potential by performing three loops shortly after takeoff.[8] During this initial sortie, the Triplane exhibited an exceptional initial climb rate exceeding 1,000 feet per minute, far surpassing contemporary biplanes like the Sopwith Pup.[5] Early test flights in the following days further highlighted its superior handling characteristics, including a rapid roll rate, light and responsive controls, and inherent stability that allowed for precise maneuvering at high altitudes. A second prototype, N504, first flew in August 1916 for additional testing.[6][7] In mid-June 1916, N500 was sent to Dunkirk for evaluation with "A" Naval Squadron, where a synchronized Vickers machine gun was fitted to fire through the propeller arc and it saw immediate combat use.[9] These tests confirmed the aircraft's operational viability, with pilots noting its agility and climb performance as key advantages over existing fighters, paving the way for further development.Production and contracts
Following the successful evaluation of the prototype, the Admiralty placed an initial production contract in July 1916 for 46 Sopwith Triplanes to be manufactured by Clayton & Shuttleworth Ltd.[7] Between July 1916 and January 1917, the Admiralty issued two additional contracts to Sopwith Aviation Company for a total of 95 aircraft, along with two contracts to Clayton & Shuttleworth for the aforementioned 46 units.[7] In August 1916, the War Office placed an order for 100 Triplanes intended for the Royal Flying Corps, primarily to be built by Clayton & Shuttleworth, but this was cancelled in February 1917 in exchange for Admiralty contracts for SPAD S.VII fighters.[7] A subsequent contract was awarded to Oakley & Co. Ltd. for 25 aircraft for the Royal Flying Corps, though only three (serial numbers N5910–N5912) were completed and delivered before cancellation in October 1917 due to changing priorities.[10] Sopwith Aviation Company handled the majority of production at its Kingston-upon-Thames facility, completing 98 units, while Clayton & Shuttleworth delivered all 46 of its Admiralty allocation, resulting in a grand total of 147 Triplanes built.[11] Deliveries began in late 1916, with the bulk arriving in early 1917 and production wrapping up by mid-1917, though output was hampered by shortages of Clerget rotary engines, which delayed full-scale manufacturing across contractors.[1]Design
Airframe and configuration
The Sopwith Triplane employed a triplane wing configuration with three superimposed narrow-chord wings, each sharing the same span of 26 ft 6 in (8.07 m) and featuring a constant chord of approximately 3 ft (0.91 m), which contributed to reduced drag through minimized wingtip vortices while enhancing lift distribution for superior maneuverability.[12][13] This arrangement, with ailerons fitted to the trailing edge of all three wings, provided exceptional roll rates and an unobstructed forward view for the pilot.[9] The wings utilized single-spar wooden construction with fabric covering, braced by N-type interplane struts and minimal cabane wiring to maintain structural simplicity and lightness.[6] The fuselage adopted a conventional rectangular wooden box-girder structure, built from spruce longerons and formers with internal wire bracing, and covered in doped linen fabric for a smooth aerodynamic surface.[12] It measured 18 ft 10 in (5.74 m) in length, with a maximum width of about 2 ft 6 in (0.76 m) and height around 3 ft (0.91 m) at the cockpit, tapering rearward to accommodate the empennage while housing the pilot, fuel tank, and instrumentation in an open cockpit.[6] This design, derived from the earlier Sopwith Pup, emphasized strength-to-weight efficiency typical of wartime wooden aircraft construction.[7] The undercarriage was a fixed, V-shaped assembly with ash skids and wire bracing for lateral stability, mounted via streamline struts to the lower fuselage longerons, and included a sprung ash tailskid sheathed in metal to absorb impacts during rough-field landings.[6] The empennage featured a fixed tailplane with balanced elevators and a vertical fin with a horn-balanced rudder, all constructed from wood and fabric to ensure responsive yaw and pitch control integrated seamlessly with the wing ailerons.[12]Powerplant and propulsion
The Sopwith Triplane employed nine-cylinder air-cooled rotary engines produced by Clerget, which provided reliable power for its agile flight characteristics. Initial prototypes and early production models were equipped with the 110 hp Clerget 9Z engine, while subsequent aircraft predominantly featured the upgraded 130 hp Clerget 9B for improved speed and climb performance.[7][14][6] These engines drove a two-bladed wooden fixed-pitch propeller with a diameter of 9 feet (2.76 m), operating at up to 1,250 rpm to deliver direct thrust without gearing.[13] The fuel system utilized a gravity-fed setup with a 20 imperial gallon tank mounted in the upper wing, ensuring straightforward supply to the engine; oil, with a 4 imperial gallon capacity, was housed in the base of the engine sump typical of rotary designs.[9] With the 130 hp Clerget 9B variant, this propulsion configuration yielded a maximum speed of 117 mph at 5,000 ft, a service ceiling of 20,500 ft, and an operational endurance of 2¾ hours, contributing to the aircraft's effectiveness in aerial combat.[7][6][3]Armament and avionics
The Sopwith Triplane was equipped with a single synchronized 0.303-inch Vickers machine gun mounted on the fuselage forward of the cockpit, firing through the propeller arc.[3] This configuration allowed the pilot to engage enemy aircraft directly while maintaining forward visibility.[1] The gun was typically supplied with 500 rounds of .303-inch ammunition in belts stored in an ammunition box.[15] Synchronization was achieved using the Sopwith-Kauper interrupter gear, which mechanically timed the gun's firing to avoid propeller blades, ensuring safe operation during combat.[16] Later examples incorporated the more reliable Constantinesco CC hydraulic synchronizer for improved firing consistency.[17] Some production variants, such as those built by Clayton & Shuttleworth, experimentally fitted twin Vickers guns, though these reduced performance and were not widely adopted.[7] The primary sighting system was the Aldis tubular optical sight, a simple collimator providing basic aiming alignment for the Vickers gun.[18] Avionics were minimal, reflecting early World War I technology, with no radio equipment installed. Instrumentation included a basic revolution counter (tachometer) to monitor engine speed, a Type 5/17 magnetic compass for navigation, and rudimentary gauges for fuel and oil pressure.[19] These instruments were mounted on a simple panel in the cockpit, prioritizing essential flight data over advanced features.Operational history
Introduction to service
The first production Sopwith Triplanes were delivered to the Royal Naval Air Service (RNAS) in December 1916, following earlier orders placed between July and October of that year; these initial aircraft were assigned to No. 1 (Naval) Squadron at Furnes, Belgium.[20][21] Pilots underwent a training phase to adapt to the Triplane's light and sensitive controls, which provided effective responsiveness but demanded precise handling to avoid overcorrection; this unfamiliarity contributed to early accidents, including the crash of the first production example, N5420, at St Omer on 28 December 1916, and several landing incidents in the following weeks.[22][23] Compared to its predecessor, the Sopwith Pup, the Triplane demonstrated superior climb performance—reaching 6,500 feet in approximately 6.5 minutes versus the Pup's 14 minutes to 10,000 feet—enhancing its effectiveness for high-altitude patrol duties over the front lines.[5][24] With training complete, No. 1 (Naval) Squadron commenced early non-combat patrols over the Western Front in January 1917, marking the Triplane's initial operational integration into RNAS activities.[21][25]Combat deployment and tactics
The Sopwith Triplane entered combat deployment with the Royal Naval Air Service (RNAS) squadrons on the Western Front, primarily Nos. 1, 8, 9, and 10, which received the aircraft in quantity starting in early 1917. No. 8 (Naval) Squadron began equipping with Triplanes in February 1917 at bases near Dunkirk, followed by Nos. 9 and 10 (Naval) Squadrons between April and May, with No. 1 (Naval) Squadron incorporating them from spring evaluations of the prototype. These units operated from forward airfields in the Dunkirk and Ypres sectors, conducting patrols and offensive sweeps to contest German air superiority.[20][26] RNAS tactics emphasized the Triplane's exceptional rate of climb—reaching 6,500 feet in under 6.5 minutes—to secure an altitude advantage over adversaries, allowing pilots to execute hit-and-run attacks by diving on enemy formations before disengaging upward. This approach leveraged the aircraft's agility and tight turning radius for effective dogfighting, particularly against Albatros D.III and D.V scouts, where the Triplane's maneuverability often proved decisive in close-quarters engagements. Squadrons like No. 10 (Naval) routinely employed formation tactics, with flights of four to six aircraft climbing to observe and then striking German patrols from above, minimizing exposure to return fire. The single synchronized Vickers machine gun provided adequate firepower for these bursts, though pilots noted its limitation in prolonged fights.[8][5][2] In addition to fighter sweeps, Triplanes supported anti-Zeppelin patrols over the Channel and coastal areas, as well as opportunistic ground attacks on troop concentrations and artillery in the Ypres salient during major offensives. Engagements against Fokker biplanes, including early D.VII models, highlighted the Triplane's versatility, though its single-gun armament sometimes disadvantaged it against multi-gunned foes in extended combats. Operational challenges included vulnerability to ground fire during low-level strafing and structural fragility under heavy maneuvering, contributing to attrition from both combat and accidents.[20][27]Notable pilots and engagements
One of the most renowned units to operate the Sopwith Triplane was "Black Flight" of No. 10 Naval Squadron, Royal Naval Air Service, commanded by Canadian ace Raymond Collishaw.[28] This all-Canadian flight, consisting of five pilots, flew black-painted Triplanes and achieved 87 victories against German aircraft over three months from May to July 1917, employing coordinated formation tactics that leveraged the aircraft's superior climb rate and maneuverability.[28] Collishaw personally claimed 34 of his eventual 60 victories in the Triplane during this period, establishing it as a cornerstone of his wartime record.[28] Australian ace Roderic Stanley Dallas also flew the Triplane extensively with No. 1 Naval Squadron, transitioning from the Sopwith Pup to the prototype N500 and later production models, where he scored many of his victories against Albatros scouts and other foes.[29] Dallas amassed 32 confirmed kills overall, with a significant portion achieved in the Triplane, including a notable engagement where he and a companion confronted 14 enemy aircraft at 18,000 feet for 45 minutes, downing three and dispersing the formation.[29] During "Bloody April" 1917, amid the Battle of Arras, Triplanes of No. 1 Naval Squadron provided critical defensive cover, with Roderic Dallas downing an Albatros D.III on 5 April using N5436 northeast of Arras.[20] The following day, squadron pilots, including Dallas, claimed three more Albatros scouts in intense skirmishes, helping to counter German air superiority despite heavy losses across British aviation units.[20] In June 1917, Triplanes faced aggressive opposition from Jasta 11, led by Manfred von Richthofen; on 25 June near Messines, Flight Sub-Lieutenant G.E. Nash of No. 8 Naval Squadron was shot down and captured after an engagement with Leutnant Karl Allmenröder, highlighting the escalating triplane-versus-Albatros dogfights.[30] On the Eastern Front, a single Sopwith Triplane (N5486) served with the Imperial Russian Air Service from May 1917, but achieved limited successes due to chronic supply shortages and maintenance challenges in the harsh operating environment.[18] Captured by Bolshevik forces after the October Revolution, it continued in red-star markings but saw minimal combat impact.[18]Withdrawal and legacy in service
The Sopwith Triplane's front-line service began to wind down in mid-1917 as the Royal Naval Air Service transitioned to the more versatile and heavily armed Sopwith Camel, which offered superior firepower and overall performance in evolving aerial combat scenarios. By September 1917, most squadrons had fully replaced their Triplanes with Camels, with the last operational units completing the handover by October; this shift was driven by the Camel's ability to mount synchronized machine guns and its greater adaptability to the increasing sophistication of German fighters.[5] Surviving airframes were withdrawn to the United Kingdom for secondary roles, though production had been limited to approximately 147 units, constraining the type's overall availability.[31] Throughout its brief combat tenure, the Triplane suffered notable attrition, with individual squadrons like No. 10 (Naval) Squadron's "Black Flight" losing three pilots in quick succession during the summer of 1917—one captured and two killed in action—highlighting the risks of intense dogfighting against Albatros scouts. Broader operational demands resulted in significant losses from both combat engagements and training accidents, contributing to the decision to phase out the type amid resource constraints. Post-armistice, the majority of remaining Triplanes were scrapped as part of widespread demobilization efforts, with few preserved for non-operational purposes.[5] The Triplane's legacy endured beyond its withdrawal, profoundly shaping World War I fighter doctrine by demonstrating the advantages of triplane configurations for enhanced agility, tight turning radii, and rapid climb rates that allowed pilots to dictate engagements. Its success prompted German designers to pursue similar multiplane layouts, directly inspiring the Fokker Dr.I through captured examples and performance reports; the Idflieg ordered the Dr.I prototype adaptation on July 14, 1917, recognizing the Triplane's edge in maneuverability over contemporary biplanes. In the post-war period, surviving Triplanes served briefly as trainers within the Royal Air Force until shortly after the Armistice in late 1918, underscoring the transitional role of triplanes in aviation evolution.[5][32]Operators
Royal Naval Air Service
The Royal Naval Air Service (RNAS) served as the primary operator of the Sopwith Triplane, receiving approximately 128 aircraft between late 1916 and mid-1917 for frontline use on the Western Front.[7][33] These aircraft equipped several squadrons, with Nos. 1, 8, 9, and 10 Naval Squadrons receiving the majority starting from late 1916, while Nos. 11 and 12 incorporated smaller numbers for operational and training roles.[20][18] No. 1 Naval Squadron became fully operational with the type in December 1916, with first significant combat in February 1917, followed by No. 8 in February, and Nos. 9 and 10 between April and May.[7] Squadrons were based primarily around Dunkirk for Channel patrols and escort duties, with No. 10 Naval Squadron operating from Saint-Pol, a suburb near Dunkirk, enabling rapid response to threats over the Belgian coast and North Sea approaches.[34] No. 10 Squadron's "Black Flight" claimed 87 aerial victories between May and July 1917, demonstrating the type's effectiveness in offensive patrols.[7] Training for RNAS pilots occurred at facilities such as Eastchurch, where the Triplane's simple construction facilitated instruction on its agile handling characteristics.[35] Maintenance at these stations emphasized quick turnaround times, with the aircraft's modular wing design allowing for efficient repairs and minimal downtime between sorties.[18] As service progressed, RNAS pilots expressed a preference for the Triplane over alternatives like the SE.5a, particularly for low-level work, due to its superior maneuverability and climb rate that excelled in close-range engagements and ground-attack missions.[20]Foreign military operators
Limited numbers of Sopwith Triplanes were exported to Allied nations. The French Aéronautique navale received 17 aircraft in 1917 for evaluation and maritime duties, primarily based at Dunkirk, though they saw no extensive frontline service as the French military favored other designs like the Nieuport fighters.[7][1] The Hellenic Navy acquired one Sopwith Triplane for evaluation purposes.[1] One aircraft was supplied to the Imperial Russian Air Force in 1917 via Allied aid, operated briefly for reconnaissance and patrols before the revolution; serial N5486 later served with Soviet detachments.[33][36] A single example was sent to the United States in 1917 for evaluation trials, with no combat deployment or further adoption.[33]Survivors and reproductions
Preserved original aircraft
Only two authentic Sopwith Triplanes from the First World War era survive today, both in non-airworthy condition and preserved for static display purposes.[37][8] The fuselage of N5912 is held by the Royal Air Force Museum in Hendon, London, United Kingdom. Built by Oakley & Co. Ltd. as one of three late-production aircraft delivered in October 1917, it served briefly with training units before the armistice and was subsequently stored and displayed in various UK institutions until its transfer to the RAF Museum in 1971.[38][8] Its provenance is verified through Admiralty contract records (No. CPI17520/16) and serial allocation logs, confirming its original RNAS designation and post-war custody chain.[10][26] N5486, consisting of the wings, fuselage, and associated parts in incomplete form, is preserved at the Central Air Force Museum in Monino, Moscow Oblast, Russia. Supplied to the Russian Imperial Government in May 1917 for evaluation, it remained in Russian custody through the post-war period and into Soviet collections.[39][40] Authentication relies on serial records from the original Admiralty procurement and corroborating documentation from the British Military Mission to Russia, tracing its transfer and survival.[41][31] No original Sopwith Triplanes are airworthy, as both survivors have undergone conservation for museum exhibition rather than restoration to flying condition.[37]Modern replicas and restorations
One prominent modern flying replica is G-BOCK, a full-scale reproduction of the Sopwith Triplane N6290 built by the volunteer team at Northern Aeroplane Workshops in the United Kingdom using original plans.[42] Completed and first registered in 1988, it replicates the aircraft's distinctive "Dixie" color scheme from No. 8 Naval Squadron service and is powered by a period-accurate 130 hp Clerget 9B rotary engine.[43] The replica achieved such fidelity that Sopwith Aviation founder Sir Thomas Sopwith, upon inspection, described it as indistinguishable from a late-production original rather than a reproduction.[44] Housed at the Shuttleworth Collection in Old Warden, G-BOCK remains airworthy and participates regularly in heritage airshows, demonstrating the Triplane's agile handling characteristics.[42] In the United States, the Military Aviation Museum in Virginia Beach operates another airworthy full-scale replica constructed by aviation enthusiast Charles D. Wille in 1993, representing serial N5195 from No. 10 Naval Squadron.[2] Acquired by the museum in 2017 following restoration, this example substitutes a modern 180 hp Lycoming O-360 flat-four engine for the original rotary design to enhance reliability while preserving the airframe's structural authenticity.[2] It completed its first post-acquisition flight in 2018 and continues to fly during museum events, providing public demonstrations of early fighter maneuverability.[45] A recent highlight in aviation heritage reconstruction is the full-scale replica of N5493 "Blymp"—the mount of Australian ace Robert Little—completed by a Czech team led by Petr Tax at the Metoděj Vlach Aviation Museum in Mladá Boleslav.[46] Initiated in 2020 with construction starting in 2022, the project involved 30 craftspeople and adhered closely to 1917 documentation, incorporating a 145 hp Warner Scarab radial engine to meet ultralight regulations.[46] The aircraft achieved its maiden flight on 18 September 2024, piloted by Vladimir Handlík, who also sourced the engine, and was formally christened on 7 October 2024.[46] In recognition of its historical accuracy and craftsmanship, the reconstruction team and Metoděj Vlach Foundation received the FAI Phoenix Group Diploma on 12 June 2025 from the Fédération Aéronautique Internationale.[46] Additional modern efforts include partial restorations and static replicas for educational purposes, such as the one built by Canadian enthusiast Carl R. Swanson between 1963 and 1966, now on display at the Canada Aviation and Space Museum after acquisition in 1966.[47] Several airworthy Sopwith Triplane replicas exist globally, primarily operated by museums and heritage groups to preserve flight demonstrations of this influential World War I design.Specifications
Clerget 9Z-engined variant
The Clerget 9Z-engined variant represented the initial production configuration of the Sopwith Triplane, featuring the 110 hp Clerget 9Z nine-cylinder rotary engine for propulsion.[3] This early model was underpowered compared to subsequent versions but entered limited service with the Royal Naval Air Service.[6] Key specifications for this variant include the following:| Specification | Value |
|---|---|
| Crew | 1[3] |
| Length | 18 ft 10 in (5.74 m)[3] |
| Wingspan | 26 ft 6 in (8.08 m)[3] |
| Height | 10 ft 6 in (3.20 m)[3] |
| Wing area | 231 sq ft (21.5 m²)[6] |
| Empty weight | 1,101 lb (499 kg)[3] |
| Gross weight | 1,541 lb (699 kg)[3] |
| Maximum speed | 117 mph (188 km/h) at sea level[3] |
| Climb rate | 1,000 ft/min (5.1 m/s)[26] |
| Endurance | 2 hours 45 minutes[3] |
| Armament | 1 × .303 in Vickers machine gun[3] |
Clerget 9B-engined variant
The Clerget 9B-engined variant represented the main production version of the Sopwith Triplane, featuring a more powerful 130 hp Clerget 9B nine-cylinder rotary engine that enhanced performance compared to the initial 110 hp Clerget 9Z installation. This configuration entered service in early 1917 and equipped the majority of the 147 aircraft built by Sopwith and subcontractors. Key specifications for this variant are detailed below.[4]| Parameter | Specification |
|---|---|
| Crew | 1 |
| Length | 18 ft 10 in (5.74 m) |
| Wingspan | 26 ft 6 in (8.08 m) |
| Height | 10 ft 6 in (3.20 m) |
| Wing area | 231 sq ft (21.5 m²) |
| Empty weight | 1,101 lb (499 kg) |
| Gross weight | 1,541 lb (699 kg) |
| Maximum speed | 117 mph (188 km/h) at 5,000 ft (1,524 m)[6] |
| Climb rate | 1,000 ft/min (5.1 m/s)[2] |
| Climb to 10,000 ft | 10 min 30 sec[18] |
| Service ceiling | 20,500 ft (6,250 m)[3] |
| Endurance | 2.75 hours |
| Armament | 1 × synchronized 0.303 in Vickers machine gun (some aircraft fitted with 2) |