Fact-checked by Grok 2 weeks ago

Strontium carbonate

Strontium carbonate is the inorganic compound with the chemical formula SrCO₃, appearing as a white, odorless, crystalline powder that is sparingly soluble in water but reacts with acids to release carbon dioxide.^[1]^[2] It has a molecular weight of 147.629 g/mol, a density of 3.5 g/cm³, and decomposes upon heating above 1200°C into strontium oxide and carbon dioxide, without a distinct melting point.^[1]^[2] Strontium carbonate was first identified in 1790 from the mineral strontianite discovered in Strontian, Scotland.^[3] In nature, it occurs as the mineral strontianite, though it is less abundant than celestite (strontium sulfate, SrSO₄), which serves as the primary commercial source of strontium.^[2]^[4] Strontium constitutes about 0.038% (384 ppm) of the Earth's crust, and as of 2023, is extracted mainly from celestite deposits in countries including China, Iran, Mexico, and Spain.^[5] It is industrially produced from celestite, primarily via the black ash process. Strontium carbonate is widely used in ceramics, glass, pyrotechnics, and as a precursor for other strontium compounds. It has low toxicity but can cause mild irritation upon exposure.^[2]

Overview

Chemical identity and natural occurrence

Strontium carbonate is an inorganic compound with the chemical formula SrCO₃ and a molar mass of 147.63 g/mol.^[6] It appears as a white to grey powder in its pure form.^[6] Naturally, it occurs as the mineral strontianite, which is the primary strontium-bearing carbonate mineral.^[7] Strontianite crystallizes in the orthorhombic system, with point group symmetry 2/m 2/m 2/m, forming short to long prismatic, acicular, or pseudohexagonal crystals that can reach up to 8 cm in length.^[7] Its crystal structure is analogous to that of aragonite, featuring slightly larger cell parameters due to the larger strontium ion.^[8] The mineral exhibits a vitreous to resinous luster and is brittle, with nearly perfect cleavage on {110}.^[7] Strontianite is a rare mineral, named after its type locality in Strontian, Argyll, Scotland, where it was first identified in lead mines around 1791.^[9] Significant deposits also occur in association with celestine (strontium sulfate) worldwide, including in the Mud Hills near Barstow, California, within Miocene sedimentary layers of the Barstow formation, and in low-temperature hydrothermal veins in limestone and marl in regions like Westphalia, Germany.^[10] Other notable sites include the Kola Peninsula in Russia and various locations in the United States such as Illinois.^[7] Geologically, strontianite forms through low-temperature hydrothermal processes in veins, geodes, and concretions within carbonate-rich sedimentary environments like limestone, marl, and chalk, or as a gangue mineral in metallic sulfide veins; it is also common in carbonatites.^[7] It often associates with minerals such as calcite, barite, celestine, and sulfur, precipitating under conditions favoring strontium carbonate stability in these settings.^[7]

History

Strontium was first identified in 1790 by Scottish chemists Adair Crawford and William Cruickshank, who analyzed samples of the mineral strontianite (SrCO₃) obtained from lead mines near the village of Strontian in Argyllshire, Scotland.^[9] The element and its compounds were named after this locality, derived from the Gaelic "Sròn an t-Sìthein," meaning "nose of the fairy hill."^[11] In the early 19th century, German chemist Martin Heinrich Klaproth conducted detailed analyses of strontianite, confirming in 1793 that it was chemically distinct from baryte (barium sulfate) and witherite (barium carbonate), thus establishing strontium as a unique alkaline earth element.^[12] Building on this, Humphry Davy isolated strontium metal for the first time in 1808 through electrolysis of a mixture of strontium chloride and mercuric oxide at the Royal Institution in London.^[13] During the 1800s, strontium carbonate found initial applications in pyrotechnics for producing brilliant red colors in fireworks and in glassmaking to refine optical clarity and color.^[14] Commercial production of strontium carbonate began in the mid-19th century, primarily from celestine (SrSO₄) deposits, with early operations in Germany starting around 1840 to meet growing demand for these uses. A key advancement came in the early 20th century with the development of the black ash process, which improved efficiency by roasting celestine with coke to form strontium sulfide, followed by carbonation to yield high-purity strontium carbonate.^[15]

Properties

Physical properties

Strontium carbonate is a white, odorless powder that may appear greyish-white depending on purity and preparation method.^[16]^[2] The compound has a density of 3.5 g/cm³.^[1]^[2] It does not melt but decomposes without melting above approximately 1200 °C into strontium oxide and carbon dioxide, with decomposition onset around 875 °C depending on conditions.^[17]^[18] Strontium carbonate is practically insoluble in water, with solubility reported as low as 0.0011 g/100 mL at 18 °C, though literature values vary up to 0.011 g/100 mL at similar temperatures, highlighting discrepancies possibly due to measurement conditions or sample variations.^[16]^[2]^[17] Solubility increases substantially to approximately 0.1 g/100 mL in water saturated with carbon dioxide, owing to the formation of the more soluble strontium bicarbonate.^[17] Additional physical characteristics include a refractive index of 1.518 and thermal stability maintained up to approximately 1200 °C, beyond which it decomposes without prior phase change.^[16]^[1]

Chemical properties

Strontium carbonate (SrCO₃) is an ionic compound composed of the divalent strontium cation (Sr²⁺) and the carbonate anion (CO₃²⁻), forming a lattice with an orthorhombic crystal structure akin to the mineral aragonite.^[17]^[19] The carbonate ion imparts basic character to the compound through hydrolysis in aqueous environments, where CO₃²⁻ reacts with water to produce bicarbonate and hydroxide ions (CO₃²⁻ + H₂O ⇌ HCO₃⁻ + OH⁻), resulting in a weakly basic solution with a pH of approximately 7-8 for dilute suspensions.^[19] In terms of reactivity, strontium carbonate dissolves readily in acids, liberating carbon dioxide gas and forming soluble strontium salts. A representative reaction with hydrochloric acid is given by the equation:

\text{SrCO}_3 + 2\text{HCl} \rightarrow \text{SrCl}_2 + \text{H}_2\text{O} + \text{CO}_2

This acid-base reaction proceeds via protonation of the carbonate ion, leading to effervescence characteristic of metal carbonates. The compound exhibits thermal instability at elevated temperatures, decomposing above 1,200 °C to yield strontium oxide and carbon dioxide according to:

\text{SrCO}_3 \rightarrow \text{SrO} + \text{CO}_2

Decomposition initiates around 875 °C under certain conditions but requires higher temperatures for complete conversion, influenced by factors such as particle size and atmosphere.^[20]^[18] Strontium carbonate demonstrates good chemical stability under ambient conditions, remaining resistant to atmospheric moisture and non-hygroscopic, which allows safe handling without significant degradation.^[2] For identification purposes, its spectroscopic properties are distinctive; infrared (IR) spectroscopy shows characteristic absorption bands for the carbonate group, including the out-of-plane bending mode (ν₂) at about 854 cm⁻¹, asymmetric stretching (ν₃) around 1,400-1,500 cm⁻¹, and symmetric stretching (ν₁) near 1,040-1,105 cm⁻¹, confirming its aragonite-like structure.^[21]^[22]

Production

Natural sources and extraction

Strontianite (SrCO₃) serves as the primary mineral for natural strontium carbonate, but it is considerably rarer than celestite (SrSO₄), the dominant strontium-bearing mineral that accounts for the vast majority of commercial production.^[5] Strontianite typically forms as a low-temperature hydrothermal mineral or groundwater precipitate in carbonate sedimentary rocks, such as limestone, and is occasionally associated with evaporite formations.^[23] Significant global deposits of strontianite occur in Scotland at the Strontian locality, where the mineral was first identified in 1790 during lead mining operations; in North Rhine-Westphalia, Germany; near Barstow in San Bernardino County, California, USA, within the Mud Hills; and in China, where a developed deposit has been noted as the primary active source.^[9]^[10]^[24] These sites represent the key geological sources, though strontianite's overall scarcity limits its contribution to less than 1% of global strontium resources.^[5] Extraction of strontianite begins with mining the ore using open-pit methods for shallow, unconsolidated deposits or underground techniques for deeper veins, as demonstrated in early 20th-century operations at the California sites where loose clays necessitated surface gathering of high-grade float material.^[10] The mined ore undergoes crushing and grinding to liberate the mineral, followed by froth flotation to separate strontianite from gangue minerals like calcite and silica, yielding a concentrate with high purity—often exceeding 87% SrCO₃ in premium deposits.^[10] Calcination may be applied selectively to remove volatile impurities, further refining the product without altering the carbonate form.^[10] Direct extraction from strontianite provides high-purity strontium carbonate suitable for specialized applications, but its limited availability constrains yields and economic viability.^[5] Strontianite mining has declined significantly since the 1950s, particularly in the United States where no production has occurred since 1959, due to the preference for processing the more abundant celestite into strontium compounds via industrial methods.^[5]^[25]

Industrial preparation

The primary industrial method for producing strontium carbonate is the black ash process, which starts with celestite (SrSO₄) as the main precursor. In this process, finely ground celestite is roasted with coke in a rotary kiln at temperatures of 1,100–1,300 °C to reduce it to strontium sulfide according to the reaction:

\text{SrSO}_4 + 2\text{C} \rightarrow \text{SrS} + 2\text{CO}_2

The resulting strontium sulfide is then leached with hot water and oxidized using carbon dioxide and water to precipitate strontium carbonate, yielding hydrogen sulfide as a byproduct via the reaction:

\text{SrS} + \text{CO}_2 + \text{H}_2\text{O} \rightarrow \text{SrCO}_3 + \text{H}_2\text{S}

The hydrogen sulfide byproduct is captured and managed through scrubbing to prevent environmental release.^[26]^[27]^[28] An alternative approach is the direct conversion process, where celestite is treated with a sodium carbonate (Na₂CO₃) solution under steam conditions to form crude strontium carbonate and sodium sulfate. The crude product is subsequently purified by acidification with hydrochloric acid (HCl) to solubilize impurities, followed by re-precipitation using CO₂ or Na₂CO₃ to obtain higher-purity strontium carbonate.^[29] Another synthetic route involves double decomposition, in which strontium chloride (SrCl₂), derived from the reaction of celestite with HCl, is reacted with sodium carbonate solution:

\text{SrCl}_2 + \text{Na}_2\text{CO}_3 \rightarrow \text{SrCO}_3 + 2\text{NaCl}

This method is particularly useful for producing high-purity grades suitable for specialized applications.^[30] As of 2023, global celestite production, the main precursor for strontium carbonate, was 520,000 metric tons, with major producers including Mexico, Spain, China (80,000 tons, or 15%), and Iran (200,000 tons). In 2023, Iran produced 200,000 metric tons of celestite, emerging as a key supplier. Global resources exceed 1 billion metric tons, primarily as celestite. These processes typically achieve 98–99% purity for the final product, with impurities and byproducts like sodium sulfate or hydrogen sulfide handled through filtration and scrubbing steps to meet commercial standards.^[5]

Microbial precipitation

Microbial precipitation of strontium carbonate involves biological processes where microorganisms, particularly cyanobacteria, facilitate the formation of strontium-bearing carbonate minerals through biomineralization. In natural settings, epilithic cyanobacteria such as Calothrix, Synechococcus, and Gloeocapsa induce precipitation by serving as nucleation sites and elevating local pH via photosynthetic uptake of CO₂, which promotes the exchange of HCO₃⁻ for OH⁻ and leads to the supersaturation of carbonate ions with strontium and calcium ions present in the environment.^[31] This results in the formation of strontian calcite, a solid solution where strontium substitutes for calcium in the calcite lattice, typically incorporating up to 1 wt% Sr due to the similar chemical behavior of Sr²⁺ and Ca²⁺ despite their ionic radius differences.^[31] Such precipitation occurs in diverse environments, including groundwater discharge zones associated with serpentinite bedrock, alkaline lakes, and soils, as well as controlled lab-scale bioreactors.^[31] In these settings, the process forms porous thrombolitic crusts or intracellular and extracellular mineral phases, often as (Sr,Ca)CO₃ solid solutions, with cyanobacteria like Synechocystis sp. PCC6803 and Pseudanabaena catenata demonstrating the ability to stabilize amorphous carbonates before crystallizing into strontianite (SrCO₃) or mixed phases under varying ionic conditions.^[32] Early research in the 1990s highlighted the role of cyanobacterial biomineralization in strontium calcite formation at specific groundwater sites, establishing photosynthesis-driven pH shifts as a key mechanism.^[31] Post-2020 advances have leveraged synthetic biology and targeted culturing to enhance production; for instance, studies on Synechocystis sp. PCC6803 showed prolonged stabilization of strontium-rich amorphous carbonates in SrCl₂-amended media, while Pseudanabaena catenata achieved near-complete Sr removal under alkaline pH (~11.4), forming both extracellular strontianite and intracellular strontium polyphosphates.^[32] Additionally, ureolytic bacteria and cyanobacteria like Gloeomargarita lithophora have been explored for intracellular CaCO₃ formation that sequesters Sr, building on these foundational mechanisms for more efficient biomineralization. This biological approach holds potential for bioremediation, particularly in removing strontium from wastewater, including contaminated industrial effluents.^[33] Laboratory studies using indigenous ureolytic bacteria have demonstrated up to 94% Sr precipitation efficiency over 25 days through urea hydrolysis, which generates alkalinity and incorporates Sr into calcite or vaterite phases, offering a low-energy alternative for treating strontium-laden waters.^[33] Compared to calcium carbonate precipitation, strontium incorporation is limited by the larger ionic radius of Sr²⁺ (1.18 Å) versus Ca²⁺ (1.00 Å), which hinders extensive substitution and favors formation of distinct strontianite phases or low-Sr solid solutions rather than pure SrCO₃ at higher concentrations.^[32] This mismatch also extends the amorphous phase duration in cyanobacterial biofilms, as observed in Sr-amended cultures where extracellular polymeric substances adapt to stabilize precursors before crystallization.^[32]

Applications

Pyrotechnics and ceramics

Strontium carbonate is widely employed in pyrotechnics as a colorant to produce a crimson-red flame color in fireworks and flares, resulting from the excitation of Sr²⁺ ions that emit light at wavelengths between 606 and 686 nm.^[34] This compound is preferred over strontium nitrate in such formulations due to its non-hygroscopic nature, which prevents moisture absorption and ensures composition stability, as well as its lower cost.^[35] In pyrotechnic mixtures, it typically constitutes 1-5% of the formulation to achieve optimal color intensity while acting as an acid neutralizer to enhance burning efficiency.^[36] Historically, strontium carbonate has been used in pyrotechnics since the 19th century for signal flares and tracers, where its red emission provided clear visual signaling in marine and military applications.^[10] This early adoption leveraged the compound's ability to yield a brilliant red upon combustion, making it suitable for railroad fusees and emergency signals.^[37] In ceramics, strontium carbonate serves as a flux that lowers the melting point of glazes and enamels, promoting fusibility and producing glossy, craze-resistant surfaces by introducing strontium oxide (SrO) into the formulation.^[38] It is also a key precursor in the production of strontium ferrites, such as SrFe₁₂O₁₉, which are synthesized by reacting strontium carbonate with iron oxide to form high-performance permanent magnets valued for their magnetic stability.^[39] Additional applications include the manufacture of iridescent glass for radiation-resistant components and luminous paints, where dosages of 1-5% contribute to enhanced optical effects.^[40] Compared to barium carbonate alternatives, strontium carbonate offers advantages in ceramics and pyrotechnics, including lower toxicity, reducing health risks during handling and processing.^[38]^[41]

Electronics and other uses

Strontium carbonate serves as a key precursor in the production of strontium ferrites, which are widely used in permanent magnets for electronic devices such as motors, speakers, and generators. These magnets are synthesized by calcining a mixture of strontium carbonate and iron oxide to form the ferrite phase, offering cost-effective magnetic properties suitable for high-volume applications.^[42]^[43] In advanced electronics, strontium carbonate is employed in the synthesis of high-temperature superconductors like bismuth strontium calcium copper oxide (BSCCO), where it provides the strontium component through solid-state reactions with other metal oxides and carbonates. BSCCO materials, with critical temperatures above 77 K, are used in applications requiring zero electrical resistance, such as magnetic levitation and power transmission. Additionally, strontium carbonate is calcined to strontium oxide for incorporation into electroluminescent materials, including doped strontium sulfide (SrS) phosphors that emit light under electric fields, historically applied in thin-film displays for vibrant green luminescence.^[44]^[45] Strontium carbonate finds use in cathode ray tube (CRT) glass for color televisions, where it absorbs secondary electrons and X-rays emitted from the cathode, enhancing safety and image quality. It also acts as a precursor for strontium titanate (SrTiO₃), produced via solid-state reaction with titanium dioxide, which serves as an optical material in capacitors, substrates, and dielectric layers due to its high permittivity and transparency. In refining processes, strontium carbonate precipitates impurities as strontium salts, aiding the purification of sugar by removing excess barium and certain drugs by isolating organic contaminants.^[46]^[47]^[48] Recent developments in the 2020s have explored strontium doping in perovskite solar cells to improve stability and efficiency; for instance, incorporating strontium into tin-based perovskites reduces self-p-doping and structural defects, boosting power conversion efficiency from 6.3% to 7.5%.^[49]

Safety and environmental considerations

Health effects

Strontium carbonate exhibits low acute toxicity, with an oral LD50 greater than 2,000 mg/kg in rats, indicating minimal risk from single high-dose ingestion. It acts as an irritant to the skin, eyes, and respiratory tract, particularly upon inhalation of dust, potentially causing redness, discomfort, or inflammation in exposed tissues. As a non-essential element, strontium (Sr²⁺) biologically mimics calcium (Ca²⁺), leading to its preferential accumulation in bones and teeth, where approximately 99% of absorbed strontium is deposited. This substitution can disrupt normal bone mineralization over time, with a biological half-life in human bone of about 30 years, resulting in long-term retention. Chronic exposure to elevated levels of stable strontium has been associated with rickets-like effects in children, including impaired cartilage calcification and bone softening, as well as osteomalacia in adults. Human exposure to strontium carbonate primarily occurs through inhalation of fine dust particles during mining, processing, or handling, which can lead to respiratory irritation. Ingestion represents another key route, often via drinking water contaminated with naturally occurring strontium, for which the U.S. Environmental Protection Agency has established a lifetime health advisory level of 4 mg/L to protect against potential bone-related health risks. Although strontium carbonate is chemically stable and non-radioactive in its typical form, trace amounts of the radioactive isotope strontium-90 (from nuclear fallout or environmental sources) may be present in some natural deposits, potentially contributing to long-term radiation exposure if accumulated in bone. Recent safety data sheets classify strontium carbonate as non-hazardous for transport under standard conditions, with no specific radioactive hazards noted for commercial grades. No specific OSHA permissible exposure limit exists for strontium compounds; general limits for respirable dust (5 mg/m³) and total dust (15 mg/m³) apply to minimize inhalation risks in industrial settings.^[50]

Ecological impact

The extraction of strontium carbonate precursors, such as celestite (SrSO₄) and strontianite (SrCO₃), primarily occurs in major producing regions like China, Spain, Iran, and Mexico. As of 2023, global production of strontium (in celestite) totaled approximately 520,000 metric tons, with Spain and Iran each accounting for about 38%, China 15%, and Mexico 7%.^[5] Open-pit mining operations in these areas have led to significant habitat disruption, including deforestation and soil erosion in arid ecosystems. In Mexico, a significant producer and exporter of strontium compounds (accounting for about 43% of U.S. imports as of 2023), mining activities contribute to land clearance and dust deposition, potentially affecting local ecosystems.^[5] Similarly, in China, extraction contributes to broader environmental degradation amid intensive mineral resource development. Acid mine drainage from these operations releases strontium into nearby waterways, as sulfide oxidation generates acidic runoff that mobilizes Sr²⁺ ions, potentially elevating downstream concentrations and altering aquatic chemistry.^[51] Industrial effluents from strontium carbonate processing represent a key release pathway, with discharged wastewater often containing strontium concentrations reaching several milligrams per liter, depending on production scale and treatment efficacy.^[52] These releases can lead to bioaccumulation of strontium in aquatic organisms, particularly in the skeletal structures of fish such as otoliths, scales, and bones, where Sr²⁺ substitutes for calcium due to chemical similarity, potentially disrupting calcium homeostasis at elevated exposure levels.^[53] The persistence of strontium carbonate in the environment is influenced by its low solubility, which generally limits mobility in neutral or alkaline soils and reduces immediate leaching risks.^[54] However, in acidic soils—common in regions affected by mining or atmospheric deposition—dissolution as strontium bicarbonate increases bioavailability, facilitating uptake by plants and soil invertebrates in calcium-deficient conditions.^[54] Under the European Union's REACH regulation, strontium carbonate was registered in the 2010s, mandating environmental risk assessments and monitoring to evaluate releases into water and soil compartments during production and use. In the 2020s, strontium isotopes have been increasingly utilized as tracers in pollution studies to track anthropogenic inputs, such as from industrial effluents or mine drainage, aiding in the identification of contamination sources in groundwater and surface waters.^[55] Mitigation strategies include bioremediation via microbial precipitation, where ureolytic bacteria induce strontium carbonate formation in wastewater, effectively sequestering Sr²⁺ with removal efficiencies exceeding 90% under optimized conditions like controlled Sr/Ca ratios.^[33] This approach leverages indigenous microbes in sediments to generate alkalinity and precipitate stable minerals, offering a sustainable alternative to chemical treatments for strontium-laden effluents from mining and processing sites.^[56]

References

[1]
strontium carbonate - WebElements
Formula: SrCO3; Hill system formula: C1O3Sr1; CAS registry number: [1633-05-2]; Formula weight: 147.629; Class: carbonate; Colour: white ...
[2]
ICSC 1695 - STRONTIUM CARBONATE - INCHEM
Strontium carbonate occurs naturally in the environment as strontianite. The physico-chemical properties and its natural occurence as strotianite in the ...Missing: compound sources<|control11|><|separator|>
[3]
PRODUCTION, IMPORT/EXPORT, USE, AND DISPOSAL - NCBI - NIH
One minor use of strontium is as an alloy material for the production of aluminum castings. Most commercial uses of strontium compounds and products use ...
[4]
Strontium carbonate | SrCO3 | CID 15407 - PubChem - NIH
Strontium forms 0.02-0.03% of the earth's crust and is present in igneous rocks in amounts averaging 375 ppm(1). Of the naturally occurring strontium compounds, ...
[5]
Strontium (Journal Article) | SciTech Connect - OSTI.GOV
May 1, 1992 · Strontium carbonate is used in ceramic and glass applications, and most other strontium compounds are derived from it. Authors: Ober, J.A.Missing: production | Show results with:production
[6]
Strontium - Drinking Water Treatability Database
Strontium is used industrially as a lead scavenger and in steel production. Strontium carbonate is used in pyrotechnics. Strontium chloride is used in ...
[7]
Strontium carbonate – Knowledge and References - Taylor & Francis
Strontianite or strontium carbonate (SrCO3) has been used in large-scale applications such as a chemical sensors, glasses and ceramics, bioactive materials ...
[8]
[PDF] 30 July 2014 - SAFETY DATA SHEET
Jul 30, 2014 · Descriptive Properties. Appearance (physical state, color, etc.) white to grey powder. Molecular Formula. SrCO3. Molar Mass (g/mol). 147.63.
[9]
[PDF] Strontianite SrCO3 - Handbook of Mineralogy
Strontianite. SrCO3 c. 2001-2005 Mineral Data Publishing, version 1. Crystal Data: Orthorhombic. Point Group: 2/m 2/m 2/m. Crystals typically short to long.
[10]
Strontianite SrCO3 | An Introduction to the Rock-Forming Minerals
Jan 1, 2013 · The structure of strontianite is similar to that of aragonite, but with slightly larger cell parameters due to the strontium ion being larger ...<|separator|>
[11]
The discovery of the mineral strontianite | National Museums Scotland
The mineral is named after the village of Strontian, situated on Loch Sunart at the base of the Ardnamurchan Peninsula in Argyll. The name Strontian derives ...Missing: deposits | Show results with:deposits
[12]
[PDF] Strontianite deposits near Barstow, California.
Strontianite was found 10 miles north of Barstow, in the Mud Hills (Strontium Hills), at altitudes between 3,000 and 4,000 feet.
[13]
Strontium - Element information, properties and uses | Periodic Table
Meanwhile Martin Heinrich Klaproth in Germany was working with the same mineral and he produced both strontium oxide and strontium hydroxide. Strontium ...
[14]
38. Strontium - Elementymology & Elements Multidict
In September 1793, Martin Heinrich Klaproth published a paper describing a series of parallel experiments made with strontianite and witherite (barium carbonate) ...
[15]
Strontium | Elements - RSC Education
The metal itself was isolated in 1808 by Humphry Davy at the Royal Institution in London which he did by the electrolysis of a paste of strontium chloride and ...
[16]
Strontium's scarlet sparkles | Nature Chemistry
Oct 22, 2015 · The former occurs in large sedimentary deposits, from which 300,000 tons of celestine are mined annually, mostly from China.
[17]
[PDF] STRONTIUM - USGS.gov
Domestic production of strontium carbonate, the principal strontium compound, ceased in 2006. Virtually all the strontium mineral celestite consumed in the ...
[18]
Strontium Carbonate | AMERICAN ELEMENTS ®
Melting Point, 1100-1494 °C (decomposes). Boiling Point, N/A. Density, 3.70-3.74 g/cm3. Solubility in H2O, 0.0011 g/100 mL (18 °C). Exact Mass, 147.890358.Missing: physical | Show results with:physical
[19]
Strontium carbonate | 1633-05-2 - ChemicalBook
May 20, 2025 · PH, 7-8 (20°C, 0.01g/L in H2O). Water Solubility, Soluble in ammonium chloride. Slightly soluble in ammonia and water. Merck, 14,8838.
[20]
(PDF) Kinetics of Thermal Decomposition of Strontium Carbonate
Sep 14, 2018 · SrCO3 was totally decomposed to strontium oxide (SrO) and carbon dioxide (CO2) gas at 1200°C for 45min. Kinetics calculations, were made for up to 45min ...
[21]
The kinetics and mechanism of thermal decomposition of SrCO3 ...
The results of thermal analysis (Fig. 2) show that strontium carbonate starts to decompose at the temperature of 875 °C, which was determined as the ...Missing: reactivity | Show results with:reactivity
[22]
Absorption bands carbonate characteristic by FTIR [19].
summary, SrCO3 and BaCO3 correspond to the aragonite group of carbonates (absorption band at 854 cm −1 ). Table 1 Presents the wavelengths at which the ...
[23]
Spectral Properties of Anhydrous Carbonates and Nitrates
Sep 3, 2021 · Mid-IR bands for carbonates and nitrates occur from 1,040 to 1,105 cm−1 for ν1, from 810 to 906 cm−1 for ν2, from 1,275 to 1,590 cm−1 for ν3, ...Fundamental Vibrations of... · Visible/NIR Reflectance... · Band Assignments for...
[24]
None
### Summary of Strontium Sources, Deposits, Mining, and Extraction
[25]
Strontianite: Mineral information, data and localities.
Strontianite ; Lustre: Vitreous, Resinous ; Hardness: 3½ ; Specific Gravity: 3.74 - 3.78 ; Crystal System: Orthorhombic ; Member of: Aragonite Group.About Strontianite · Mineral Symbols · Crystallography · Crystal Structure
[26]
[PDF] STRONTIUM - Amazon AWS
Chemical Products Corp. (CPC) of Cartersville, GA, was the only U.S. producer of strontium compounds from celestite. CPC produced strontium carbonate from ...
[27]
STRONTIUM - Mining Engineering Online - Official Publication of SME
Jul 1, 2024 · The largest celestite deposits are found in China, Iran, Mexico, Spain and Turkey, although no production has been reported for Turkey in recent ...<|control11|><|separator|>
[28]
Coupled process of reaction and solvent extraction: I. The reaction ...
The black ash is then leached with hot water to dissolve SrS and SrSn, which partly hydrolyzes as SrHS and Sr(OH)2 in solution. Sparging CO2 or adding sodium ...Missing: early | Show results with:early
[29]
STRONTIUM CARBONATE | - atamankimya.com
Other applications include manufacturing zinc, glass, pyrotechnics, paints, dryers, and strontium metal. The consumption of Strontium Carbonate doubled (U.S. ...
[30]
Preparation of strontium carbonate from celestite - ResearchGate
Aug 5, 2025 · There are two commercial processes to manufacture SrCO 3 from celestite [1]. In the black ash process, SrSO 4 is reduced with coke (or coal) ...
[31]
US3029133A - Method of producing strontium carbonate and ...
The (CO3) portion provided by the soluble carbonate, c g., Na2CO3 ... 14 percent SrCl2 showing a 93.7 percent recovery of the strontium values in the precipitate.
[32]
Strontium Carbonate 2025 to Grow at 2.4 CAGR with 347 million ...
Rating 4.8 (1,980) Mar 21, 2025 · The global strontium carbonate market, valued at $347 million in 2025, is projected to experience steady growth, exhibiting a Compound Annual ...Missing: 2020s output
[33]
[PDF] Mineral Commodity Summaries 2022 - Strontium - USGS.gov
Strontium compounds: Mexico, 47%; Germany, 43%; China,. 5%; and other, 5%. Total imports: Mexico, 80%; Germany, 16%; China, 2%; and other, 2%. Tariff: Item.Missing: strontianite | Show results with:strontianite
[34]
Microbial precipitation of a strontium calcite phase at a groundwater ...
Mineralogical, chemical, and microscopic analyses demonstrate an intimate relationship between epilithic cyanobacteria and the precipitation of a strontium ...
[35]
Amorphous and Crystalline Carbonate Biomineralization in ...
In this study, the cyanobacterium Synechocystis sp. PCC6803 was used to induce the precipitation of minerals in mediums with various Mg/Ca and Sr/Ca ratios.
[36]
Enhanced Strontium Removal through Microbially Induced ...
Microbially induced calcite precipitation (MICP) leads to the incorporation of Sr into calcium carbonate, which occurs in a variety of natural settings ...
[37]
Light and Colour - Ch.imperial
The following table illustrates the compounds required to produce specific coloured fireworks. Colour, Compound, Wavelength of Light. Red, Strontium Salts & ...<|separator|>
[38]
Strontium Market Forecast 2018-2025 Industry Size Share Report
Strontium carbonate is generally preferred instead of any other compound owing to its low cost and the fact that it is not hygroscopic. Its ability to ...
[39]
Strontium Carbonate - Production , Technology, Applications, Patent ...
The black ash method is the preferred means of strontium carbonate production because it yields a highergrade product. The most common use is as an inexpensive ...
[40]
Strontium | Sr (Element) - PubChem - NIH
Two strontium compounds, strontium carbonate (SrCO3) and strontium nitrate (Sr(NO3)2), burn with a bright, red flame and are used in fireworks and signal flares ...
[41]
Strontium Carbonate - Digitalfire
Strontium Carbonate is a very slightly soluble source of SrO used in ceramic glazes. Strontium is considered a safe material.Missing: chemical | Show results with:chemical
[42]
[PDF] Celestite including references to strontianite. Mineral Dossier ...
The Bristol area has supplied 50 to 70 per cent or more of world production each year since at least 1875. Celestite is mainly used to prepare strontium ...
[43]
STRONTIUM CARBONATE - Oman CHEMICAL
It can also be used as road flares and for preparing iridescent glass, luminous paints, strontium oxide or strontium salts and in refining sugar and certain ...Missing: dosage 1-5%
[44]
Reviewing Strontium Carbonate Substitutes - Iran Celestite
Additionally, it is important to consider the toxicity of barium carbonate, as it poses greater health risks compared to strontium carbonate.
[45]
How Are Ferrite Magnets Made?
The production of ferrite magnets begins with calcining a finely powdered mixture of iron oxide and strontium carbonate to produce a metallic-oxide material.
[46]
What You Need to Know about Ceramic Magnets
Apr 2, 2025 · Ceramic magnets are permanent magnets composed of strontium carbonate and iron oxide and can be used in many different applications, ...
[47]
Synthesis of highly phase pure BSCCO superconductors
The superconductor is manufactured by preparing a first powdered mixture of bismuth oxide, lead oxide, strontium carbonate, calcium carbonate and copper oxide.
[48]
https://abassco.ir/en/strontium-carbonate
[49]
Color Television - an overview | ScienceDirect Topics
The major use for strontium compounds is in producing glass for color television cathode ray tubes to prevent X-ray emission. Strontium is also utilized in ...
[50]
New Method for Synthesis of Strontium Titanate
Strontium titanate is currently prepared by high-temperature calcination of a mixture of strontium carbonate and titanium dioxide. The method imployed for ...
[51]
Strontium Carbonate
Rating 4.4 (89) It is used in the preparation of iridescent glass, luminous paints, strontium oxide or strontium salts and in refining sugar and certain drugs.
[52]
High open circuit voltages in pin-type perovskite solar cells through ...
Strontium (Sr) increases open circuit voltage by reducing non-radiative recombination, segregating at the surface, and achieving a Voc of 1.18V.
[53]
Strontium Carbonate Market Size, Industry Share, Forecast, 2032
The global strontium carbonate market has been segmented into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa.
[54]
[PDF] Mineral Commodity Summaries 2022 - USGS Publications Warehouse
Dec 1, 2019 · Strontium compounds: Mexico, 47%; Germany, 43%; China,. 5%; and other ... during or after environmental and safety inspections at Chinese mining ...
[55]
China Wrestles with the Toxic Aftermath of Rare Earth Mining
Jul 2, 2019 · Part of wider efforts across China to begin addressing severe problems of water, air, and soil pollution, the cleanup here was highlighted in ...
[56]
Strontium isotope quantification of siderite, brine and acid mine ...
Aug 5, 2025 · The acidity from the AMD promotes dissolution of the carbonate, and metal- and sulfate-contaminated waters rise to the surface through ...
[57]
Federal environmental quality guidelines - Strontium - Canada.ca
Aug 11, 2020 · Uptake of strontium ions into fish strongly depends on the concentration of calcium ions in the water. With increasing Ca2+ concentrations ...
[58]
Strontium - ScienceDirect.com
Metal pollution in estuaries represents a serious environmental challenge, especially in areas affected by industrial and mining activities. This study ...Missing: disruption | Show results with:disruption
[59]
[PDF] Strontium and Strontium Compounds - INCHEM
Low levels of strontium (about 9 ng/m3 air) were found in the immediate environment of pyrotechnic displays (Perry,. 1999). 4.2 Production and use. The ...<|separator|>
[60]
Environmental tracers of groundwater source, age, and geochemical ...
Apr 25, 2023 · Nonradiogenic strontium-87/86 ratios less than 0.70950 were diagnostic of weathered materials in the northern subarea of Hinkley and in Water ...
[61]
Bioremediation of strontium (Sr) contaminated aquifer quartz sand ...
In the present study, microbially induced calcite precipitation (MICP) was evaluated for its potential to remediate strontium from aquifer quartz sand. A Sr ...Missing: microbial | Show results with:microbial