Fact-checked by Grok 2 weeks ago

Light

Light is electromagnetic radiation within the portion of the electromagnetic spectrum that is visible to the human eye, corresponding to wavelengths between approximately 380 and 750 nanometers.^[1] This narrow band, often spanning from violet (shorter wavelengths) to red (longer wavelengths), enables vision and is produced by various sources such as the sun, incandescent bulbs, and luminescent materials.^[2] Light travels through vacuum at a constant speed of exactly 299,792,458 meters per second, a fundamental physical constant that defines the meter in the International System of Units (SI).^[3] As a form of energy transfer, light consists of oscillating electric and magnetic fields perpendicular to its direction of propagation, manifesting wave-like properties such as interference and diffraction.^[4] Simultaneously, light exhibits particle-like behavior, behaving as discrete packets of energy called photons, each with energy proportional to its frequency, in accordance with quantum mechanics.^[5] This wave-particle duality underpins modern physics, explaining phenomena from the photoelectric effect to the behavior in double-slit experiments.^[6] Beyond visibility, light's broader electromagnetic context includes ultraviolet and infrared radiation adjacent to the visible spectrum, influencing applications in photography, telecommunications, and medical imaging.^[7]

Electromagnetic Nature

Electromagnetic Spectrum

Electromagnetic radiation is a form of energy propagated through space as coupled oscillating electric and magnetic fields that are mutually perpendicular to each other and to the direction of propagation.^[8] These waves travel at the speed of light in vacuum, c = 3 \times 10^8 m/s, a universal constant for all electromagnetic waves regardless of frequency or wavelength.^[3] The electromagnetic spectrum encompasses the full range of these waves, ordered by decreasing wavelength (or increasing frequency), from long-wavelength, low-energy radio waves to short-wavelength, high-energy gamma rays. The spectrum is divided into regions based on wavelength and frequency, each exhibiting distinct interactions with matter. The table below summarizes approximate ranges for the primary components, derived from standard astronomical and physical classifications.^[9]

Region	Wavelength Range	Frequency Range (Hz)
Radio waves	> 1 × 10^{-1} m	< 3 × 10^9
Microwaves	1 × 10^{-3} to 1 × 10^{-1} m	3 × 10^9 to 3 × 10^{11}
Infrared	7 × 10^{-7} to 1 × 10^{-3} m	3 × 10^{11} to 4 × 10^{14}
Visible	4 × 10^{-7} to 7 × 10^{-7} m (400–700 nm)	4 × 10^{14} to 7.5 × 10^{14}
Ultraviolet	1 × 10^{-8} to 4 × 10^{-7} m	7.5 × 10^{14} to 3 × 10^{16}
X-rays	1 × 10^{-11} to 1 × 10^{-8} m	3 × 10^{16} to 3 × 10^{19}
Gamma rays	< 1 × 10^{-11} m	> 3 × 10^{19}

The energy E of a photon in the spectrum is related to its frequency f by Planck's relation E = h f, where h is Planck's constant ($6.626 \times 10^{-34} J s). This implies that photon energy decreases with increasing wavelength, as frequency is inversely proportional to wavelength (f = c / \lambda). Thus, radio waves carry the lowest energy, while gamma rays carry the highest.^[9] The naming conventions for these regions arose historically from their discovery and initial detection methods. Infrared, meaning "below red," was named by William Herschel in 1800 after observing heating effects beyond visible red light.^[10] Ultraviolet, or "beyond violet," was identified by Johann Ritter in 1801 through its chemical effects on silver chloride. Radio waves and microwaves trace to Heinrich Hertz's 1887–1888 experiments confirming Maxwell's predictions. X-rays were termed by Wilhelm Röntgen in 1895 for their mysterious penetrating properties, and gamma rays by Paul Villard in 1900, later confirmed as electromagnetic by further studies.^[10] Visible light occupies the narrow band perceptible to the human eye.^[9]

Visible Light

Visible light constitutes the segment of the electromagnetic spectrum detectable by the human eye, spanning wavelengths from approximately 400 to 700 nanometers. This range corresponds to a continuum of colors, starting with violet at the shorter wavelengths (around 400–450 nm), progressing through blue (450–495 nm), green (495–570 nm), yellow (570–590 nm), orange (590–620 nm), and ending with red at the longer wavelengths (620–700 nm).^[2] These colors emerge from the differential refraction and dispersion of light wavelengths, illustrating the spectral nature of white light.^[11] The perception of color relies on how these wavelengths interact and combine. In additive color mixing, as exemplified by the RGB model employed in electronic displays and lighting, red, green, and blue primary lights are superimposed to generate secondary colors and ultimately white light when combined in equal intensities.^[12] Conversely, subtractive color mixing, utilized in printing and painting via the CMY model (cyan, magenta, yellow), works by pigments absorbing specific wavelengths from incident white light, with the mixture of all three primaries yielding black or near-black. A foundational example of visible light's chromatic composition is its decomposition into a rainbow spectrum when passed through a prism, revealing the inherent multiplicity of wavelengths in seemingly uniform white light.^[13]^[11] Human visual perception of visible light is tuned to this narrow band, with photopic vision—dominant in well-lit environments—peaking in sensitivity at 555 nm in the green-yellow region, where cone photoreceptor cells enable color discrimination through three types sensitive to short (blue), medium (green), and long (red) wavelengths. In dim scotopic conditions, rod cells predominate for low-light detection, providing grayscale vision without color but with heightened sensitivity to motion and shapes, peaking around 507 nm. This dual system optimizes adaptation across lighting levels, though overall sensitivity drops sharply beyond the 400–700 nm bounds.^[14]^[15] As non-ionizing radiation, visible light lacks the photon energy to eject electrons from atoms, distinguishing it from ionizing ultraviolet (below 400 nm) and X-rays (0.01–10 nm), which can damage DNA directly. Nonetheless, it exerts photochemical effects by exciting molecules in biological systems, such as triggering melanin production in skin cells upon absorption by chromophores like melanin and opsins, leading to pigmentation and potential oxidative stress.^[16]^[17] Visible light's colors also carry cultural and symbolic weight across societies, often leveraging innate perceptual cues for communication. For example, traffic signal systems universally employ red for stop (evoking danger due to its long wavelength visibility), yellow for caution (signaling transition), and green for proceed (indicating safety), a standardized convention that enhances road safety through intuitive color associations.^[18]

Fundamental Properties

Speed of Light

The speed of light in vacuum, denoted as c, is a fundamental physical constant exactly equal to 299,792,458 meters per second.^[3] This value has been fixed by definition in the International System of Units (SI) since 1983, when the meter was redefined in terms of the distance light travels in vacuum in 1/299,792,458 of a second, anchoring the unit to this invariant speed. Early attempts to measure c began in the 17th century. In 1676, Danish astronomer Ole Rømer provided the first quantitative estimate by observing discrepancies in the timing of Jupiter's moon Io's eclipses, attributing delays to the finite time light takes to travel varying distances across Earth's orbit around the Sun; his calculation yielded approximately 227,000 km/s, remarkably close to the modern value given the era's observational limits.^[19] Terrestrial measurements advanced in the 19th century with Hippolyte Fizeau's 1849 experiment, which used a rapidly rotating toothed wheel to interrupt and time light pulses traveling 8.6 km to a distant mirror and back, yielding a speed of about 313,000 km/s in air.^[20] Refinements continued with Albert A. Michelson's 1926 rotating-mirror apparatus at Mount Wilson Observatory, where an octagonal mirror spun at high speeds reflected light over a 35-km path, producing a value of 299,796 km/s with unprecedented precision for the time.^[21] Modern determinations, such as those using laser interferometry in the 1970s, confirmed the value to within a few parts per billion before its exact definition, employing coherent light sources to measure phase shifts over known baselines.^[22] The invariance of c underpins Albert Einstein's 1905 theory of special relativity, positing that light's speed in vacuum remains constant for all inertial observers regardless of their relative motion or the source's velocity, a postulate derived from the null result of the Michelson-Morley experiment and Maxwell's equations.^[23] This leads to profound consequences, including time dilation—where moving clocks tick slower—and length contraction in the direction of motion, as observers reconcile the unchanging c with differing relative speeds. Contextually, these principles enable the derivation of the mass-energy equivalence E = mc^2, showing that a body's rest energy is proportional to its mass times c^2, as explored in Einstein's companion 1905 paper linking inertia to energy content. In media other than vacuum, light travels slower, with speed v related to c by the refractive index n = c / v, a dimensionless quantity greater than 1 that quantifies the medium's optical density.^[24] This invariance in vacuum establishes c as the universal speed limit for information and causal influences, ensuring that no signal or particle with mass can exceed it, thereby preserving causality across spacetime as dictated by relativistic principles.^[23]

Wave-Particle Duality

Light exhibits both wave-like and particle-like properties, a phenomenon known as wave-particle duality, which reconciles classical descriptions with quantum mechanics. This duality is not a limitation of measurement but a fundamental aspect of light's nature, revealed through experiments that highlight one behavior or the other depending on the setup.^[25] In its wave description, light propagates as transverse electromagnetic waves, with oscillating electric and magnetic fields perpendicular to the direction of travel. These waves can be polarized, meaning the electric field vector oscillates in a specific plane (linear polarization) or rotates (circular polarization), a property unique to transverse waves. This framework arises from Maxwell's equations, which describe the interdependence of electric and magnetic fields; for instance, Faraday's law states \nabla \times \mathbf{E} = -\frac{\partial \mathbf{B}}{\partial t}, and the corrected Ampère's law is \nabla \times \mathbf{B} = \mu_0 \epsilon_0 \frac{\partial \mathbf{E}}{\partial t} in free space, predicting self-sustaining waves at speed c.^[26]^[26] Conversely, light's particle nature is embodied in photons, discrete quanta that are massless bosons carrying quantized energy and momentum. Each photon's energy is given by E = h f, where h is Planck's constant and f is the light's frequency, a relation Einstein applied to light in 1905. Photons also possess momentum p = \frac{h}{\lambda}, with \lambda the wavelength, linking the particle's relativistic properties to wave characteristics.^[27]^[28] The photoelectric effect exemplifies light's particle behavior: when monochromatic light strikes a metal surface, electrons are emitted only if the frequency exceeds a material-specific threshold \nu_0, with maximum kinetic energy K_{\max} = h f - \phi (where \phi = h \nu_0 is the work function), independent of intensity. This quantization, defying classical wave predictions, earned Einstein the 1921 Nobel Prize and established the photon concept.^[27]^[27] Compton scattering further confirms photons as particles with momentum: X-rays incident on loosely bound electrons scatter with increased wavelength \Delta \lambda = \frac{h}{m_e c} (1 - \cos \theta), where m_e is electron mass, c speed of light, and \theta the scattering angle. This shift matches conservation laws for particle collisions, not classical wave scattering, as observed in experiments reported by Compton in 1923.^[28]^[28] The double-slit experiment highlights wave properties through interference fringes formed by light passing through two slits, but in single-photon versions, detections accumulate as discrete hits that collectively build the pattern, showing particles following probabilistic wave-guided paths. Modern setups using attenuated lasers verify this duality without which-path information.^[29]^[29] The de Broglie hypothesis unifies these views by assigning a wavelength \lambda = \frac{h}{p} to any particle with momentum p, extending naturally to photons where it equates the wave wavelength to the particle's de Broglie wavelength. Proposed in 1924, this relation underpins quantum mechanics and explains light's dual manifestations.^[30]^[30]

Light Propagation and Optics

Reflection and Refraction

Reflection occurs when light encounters a boundary between two media and changes direction without altering its speed or wavelength, provided the media are non-absorbing. The law of reflection states that the angle of incidence, measured from the normal to the surface, equals the angle of reflection./University_Physics_III_-Optics_and_Modern_Physics(OpenStax)/01%3A_The_Nature_of_Light/1.03%3A_The_Law_of_Reflection) This principle holds for smooth surfaces and can be derived from wave interference considerations or Fermat's principle.^[31] Reflections are classified as specular or diffuse depending on surface roughness. Specular reflection produces a clear image, as seen in mirrors where parallel rays reflect parallel to each other at equal angles to the normal.^[32] In contrast, diffuse reflection scatters light in multiple directions from rough surfaces like paper or asphalt, enabling visibility of objects under diffuse illumination without a distinct image.^[32] Refraction describes the bending of light as it passes from one medium to another due to a change in speed, quantified by the refractive index n, which is the ratio of the speed of light in vacuum to that in the medium.^[33] Snell's law governs this bending: n_1 \sin \theta_1 = n_2 \sin \theta_2, where \theta_1 and \theta_2 are the angles of incidence and refraction, respectively.^[33] This law arises from Fermat's principle, which posits that light follows the path of least time between two points.^[31] When light travels from a denser to a rarer medium (n_1 > n_2), refraction reaches a limit at the critical angle \theta_c = \sin^{-1}(n_2 / n_1), beyond which total internal reflection occurs, with all light reflecting internally.^[34] This phenomenon is essential in fiber optics, where light is confined within a core by repeated total internal reflections.^[35] Lenses exploit refraction to focus or diverge light beams. Converging lenses, thicker at the center, bring parallel rays to a focal point, while diverging lenses, thinner at the center, spread them apart./University_Physics_III_-Optics_and_Modern_Physics(OpenStax)/02%3A_Geometric_Optics_and_Image_Formation/2.05%3A_Thin_Lenses) For a thin symmetric lens in air, the focal length f is approximated by the lensmaker's formula:

f = \frac{[R](/page/Radius_of_curvature)}{2(n-1)}

where R is the radius of curvature of each surface and n is the refractive index of the lens material./University_Physics_III_-Optics_and_Modern_Physics(OpenStax)/02%3A_Geometric_Optics_and_Image_Formation/2.05%3A_Thin_Lenses) Prisms, typically triangular, refract light through two non-parallel faces, deviating the beam and separating wavelengths due to dispersion. Dispersion arises because the refractive index n varies with wavelength, being higher for shorter wavelengths like blue light than for longer ones like red./25%3A_Geometric_Optics/25.05%3A_Dispersion_-Rainbows_and_Prisms) In a prism, this causes white light to split into a spectrum, as demonstrated by the formation of rainbows where sunlight refracts and disperses in atmospheric water droplets./25%3A_Geometric_Optics/25.05%3A_Dispersion-_Rainbows_and_Prisms) Refraction in non-uniform media can produce optical illusions such as mirages. In inferior mirages, hot ground creates a layer of low-density air near the surface; light from distant objects bends upward upon entering cooler air above, creating the appearance of water on roads.^[36]

Diffraction and Interference

Diffraction is a fundamental wave phenomenon in which light bends around obstacles or spreads through apertures, deviating from straight-line propagation predicted by geometric optics. This effect arises from the wave nature of light, as described by the Huygens-Fresnel principle, which posits that every point on a wavefront acts as a source of secondary spherical wavelets, with the new wavefront formed by the superposition of these wavelets, modulated by an obliquity factor to account for directional propagation.^[37] The principle, originally proposed by Christiaan Huygens in 1690 and refined by Augustin-Jean Fresnel in 1818, provides the theoretical foundation for understanding diffraction patterns observed in experiments.^[38] In single-slit diffraction, light passing through a narrow slit of width a produces an interference pattern on a screen, characterized by a central bright maximum flanked by alternating minima and secondary maxima. The positions of the minima occur where destructive interference dominates, given by the condition \sin \theta = m \lambda / a, where \theta is the angle from the central axis, \lambda is the wavelength, m is a non-zero integer, and a is the slit width; this arises from the path difference between wavelets from opposite edges of the slit being an integer multiple of \lambda.^[39] For circular apertures, such as in telescope objectives, diffraction limits the resolution, with the angular radius of the Airy disk (the central bright spot) approximated by \theta \approx 1.22 \lambda / D, where D is the aperture diameter; this Rayleigh criterion defines the minimum resolvable angle between two point sources, beyond which they blur into one.^[40] Interference occurs when two or more coherent light waves superpose, resulting in regions of enhanced (constructive) or reduced (destructive) intensity depending on their phase difference. In Thomas Young's double-slit experiment of 1801, monochromatic light passing through two closely spaced slits separated by distance d illuminates a distant screen at distance L, producing bright fringes spaced by \Delta y = \lambda L / d, derived from the condition for constructive interference where the path difference is m \lambda (m integer).^[41] This pattern demonstrates the wave nature of light, with fringe visibility requiring spatial and temporal coherence between the sources. Thin-film interference exemplifies this in everyday phenomena, such as the iridescent colors of soap bubbles, where light reflected from the front and back surfaces of a thin soap film of thickness t and refractive index n interferes; for constructive interference in reflection (accounting for phase shifts), the condition is $2nt = m\lambda for certain configurations, leading to wavelength-dependent color reinforcement. Polarization influences interference patterns, particularly when light from interfering sources has specific orientations. For polarized light incident on a polarizer at angle \theta to its transmission axis, the transmitted intensity follows Malus's law, I = I_0 \cos^2 \theta, where I_0 is the incident intensity; in interference setups like crossed polarizers with a birefringent sample, this modulates the overall fringe contrast by altering the effective amplitude of the superposed waves.^[42] Diffraction gratings exploit these principles in spectroscopy by dispersing light into its spectral components, enabling wavelength separation for analysis. A grating with slit spacing d produces maxima at angles satisfying d \sin \theta = m \lambda, allowing different wavelengths to be resolved spatially based on their angular deviation, far superior to prisms for precise measurements in atomic spectra.^[43] Observable interference requires coherence, meaning the light sources must maintain a constant phase relationship over the spatial extent (transverse coherence) and duration (longitudinal coherence) of the experiment; incoherent sources, like sunlight without filtering, average out phase fluctuations, washing out fringes, whereas lasers provide high coherence lengths exceeding meters for clear patterns.^[44]

Light Sources

Natural Sources

Natural sources of light encompass a variety of emission processes occurring without human intervention, ranging from thermal radiation in stellar and terrestrial environments to chemical and electrical excitations. These sources produce light across the electromagnetic spectrum, primarily through mechanisms that convert energy into photons via atomic, molecular, or plasma interactions.^[45] Thermal sources dominate many natural light emissions, arising from the agitation of charged particles in hot matter, which approximates blackbody radiation for ideal absorbers and emitters. The spectral distribution of this radiation is described by Planck's law, which quantifies the intensity of emitted radiation as a function of wavelength and temperature:

B(\lambda, T) = \frac{2hc^2}{\lambda^5} \frac{1}{e^{hc / \lambda kT} - 1}

where h is Planck's constant, c is the speed of light, k is Boltzmann's constant, \lambda is the wavelength, and T is the absolute temperature. This formula, derived from quantum considerations of energy quantization, predicts a continuous spectrum peaking at wavelengths inversely proportional to temperature, as per Wien's displacement law.^[46]^[47] The Sun exemplifies such a source, with its photosphere at approximately 5800 K emitting a near-blackbody spectrum that peaks in the visible range around 500 nm, providing the primary illumination for Earth.^[48] Geological thermal sources, such as molten lava from volcanic eruptions, also produce incandescent glow through blackbody-like radiation at temperatures typically between 1000°C and 1200°C for basaltic magma. This incandescence results from the high thermal energy of the viscous melt, visible as a dull red to orange hue at the surface, diminishing as the material cools and solidifies.^[49]^[50] Celestial sources extend thermal emission to cosmic scales, with stars like the Sun generating light primarily through nuclear fusion in their cores, where hydrogen nuclei combine to form helium, releasing vast energy that propagates outward as photons. This core energy heats the stellar surface, leading to thermal radiation, though absorption and re-emission in the outer layers modify the spectrum.^[51]^[52] Non-thermal celestial phenomena include auroras, where charged particles from the solar wind—mostly electrons and protons—collide with atmospheric gases like oxygen and nitrogen near Earth's poles, exciting atoms to emit light at specific wavelengths (e.g., green from oxygen at ~557 nm). Lightning, another atmospheric electrical discharge, ionizes air into a plasma channel at temperatures exceeding 30,000 K, producing a brief, intense flash through recombination of electrons and ions, spanning visible wavelengths with a bluish-white appearance.^[53]^[54]^[55]^[56] Bioluminescence represents a chemical emission process in living organisms, triggered by enzymatic reactions that oxidize substrates to release energy as photons. In fireflies, the enzyme luciferase catalyzes the oxidation of luciferin in the presence of oxygen and ATP, producing light primarily in the yellow-green range (500–600 nm), with peak emission around 560 nm for many species; this cold light generates minimal heat, with a quantum yield of approximately 41% (nearly 100% of the emitted energy as photons, without significant thermal loss).^[57]^[58]^[59] Natural light sources exhibit distinct spectral characteristics: thermal sources like stars and lava yield continuous spectra, with smooth intensity distributions across wavelengths due to the collective emission from dense, hot matter. In contrast, processes involving excited atoms or ions, such as in auroras, lightning plasmas, or bioluminescence, often produce line spectra, featuring discrete emission lines at wavelengths corresponding to atomic transitions (e.g., specific colors from ionized nitrogen in lightning). These line spectra arise from low-density gases where individual quantum jumps dominate over broadband thermal effects.^[60]^[61]

Artificial Sources

Artificial sources of light are engineered devices that produce illumination through controlled physical processes, enabling applications from everyday lighting to precision technologies. Unlike natural sources, these rely on electrical energy to generate photons via thermal, electrical discharge, or quantum mechanisms, with ongoing advancements improving efficiency and spectral control. Key developments span from the late 19th century onward, transforming human environments by providing reliable, tunable light. The evolution of artificial light began with Thomas Edison's incandescent bulb in 1879, which marked the first practical electric light source after extensive experimentation with filaments.^[62] This was followed by fluorescent lamps in the early 20th century and light-emitting diodes (LEDs) in the mid-20th century, culminating in the laser's invention in 1960 by Theodore Maiman using a ruby crystal.^[63] These milestones, building on principles like stimulated emission proposed by Albert Einstein in 1917, have driven efficiency gains from under 5% to over 50% in modern designs.^[63] Incandescent bulbs operate on thermal emission, where an electric current heats a filament—typically tungsten, with a melting point of about 3420°C—to around 2500 K, causing it to radiate visible light as blackbody radiation.^[64] However, their efficiency is low, converting only about 5% of input energy to visible light, with the rest lost as heat.^[64] Tungsten's high emissivity and resistance to evaporation at these temperatures made it ideal for filaments, enabling bulbs to last up to 1000 hours.^[65] Fluorescent lamps generate light through electrical discharge in low-pressure mercury vapor, exciting mercury atoms to produce ultraviolet radiation that is then converted to visible light by phosphors coating the tube interior.^[66] Pioneered by Peter Cooper Hewitt's mercury vapor lamp in 1901, these lamps achieve efficiencies of 20-30% by minimizing thermal losses compared to incandescents.^[66] The phosphor layer allows color tuning, making them suitable for broad illumination needs. Light-emitting diodes (LEDs) produce light via electroluminescence in a semiconductor p-n junction, where electrons and holes recombine to emit photons with energy E_g = h f, matching the material's bandgap E_g.^[67] Early red LEDs used gallium arsenide phosphide in the 1960s, but blue LEDs—essential for white light—emerged in 1993 using gallium nitride (GaN) developed by Shuji Nakamura and colleagues, enabling high-efficiency white LEDs through phosphor conversion.^[67] GaN's wide bandgap of about 3.4 eV allows blue emission around 450 nm, with overall efficiencies exceeding 50% in modern devices.^[67] Lasers produce coherent, monochromatic light through stimulated emission, where incident photons trigger excited atoms to release identical photons, as described by Einstein's 1917 coefficients relating absorption, spontaneous emission, and stimulated emission rates.^[63] Achieving this requires population inversion, where more atoms are in an excited state than ground state, often via optical or electrical pumping. The first laser, Maiman's 1960 ruby device, used a chromium-doped ruby crystal pumped by a flashlamp to emit red light at 694 nm.^[63] Gas lasers like the helium-neon (He-Ne), operational since 1961, use an electric discharge in a He-Ne mixture for continuous red output at 632.8 nm, prized for its coherence over meters.^[68] Solid-state lasers, such as neodymium-doped yttrium aluminum garnet (Nd:YAG), employ a Nd³⁺-doped crystal pumped by diodes or lamps to lase at 1064 nm in the near-infrared, valued for high power and beam quality.^[68] These properties—spatial and temporal coherence, narrow linewidth—distinguish lasers from incoherent sources.

Measurement and Detection

Photometric Quantities

Photometric quantities quantify light in terms of its perception by the human visual system, weighting radiant energy according to the eye's spectral sensitivity rather than physical power alone.^[69] These measures are defined by the International Commission on Illumination (CIE) and form the basis for lighting standards, display technologies, and visual comfort assessments. The core weighting function is the photopic luminosity function V(\lambda), which describes the average human eye's sensitivity to wavelengths of light, peaking at 555 nm in the green region of the visible spectrum.^[70] Luminous flux, denoted \Phi_v, represents the total amount of visible light emitted, transmitted, or received by a source, measured in lumens (lm). It is calculated by integrating the spectral power distribution of the light source with the luminosity function:

\Phi_v = 683 \int_0^\infty \Phi_{e,\lambda}(\lambda) V(\lambda) \, d\lambda,

where 683 lm/W is the maximum luminous efficacy for monochromatic light at 555 nm, and \Phi_{e,\lambda}(\lambda) is the spectral radiant flux in watts per nanometer.^[69] This quantity captures the overall "light output" as perceived by the eye, making it essential for evaluating the efficiency of lamps and LEDs.^[71] Luminous intensity, I_v, measures the brightness of a light source in a particular direction, defined as the luminous flux per unit solid angle, with the unit candela (cd), where 1 cd = 1 lm/sr. The candela is an SI base unit, fixed by the luminous intensity of monochromatic radiation at approximately 555 nm with a radiant intensity of 1/683 W/sr. It is particularly useful for point sources like LEDs or stars, emphasizing directional emission weighted by human vision.^[72] Luminance, L_v, quantifies the brightness of an extended surface or source as seen by an observer, expressed as luminous intensity per unit projected area, in candela per square meter (cd/m²). For example, typical office display screens have luminance levels of 250–350 cd/m² to ensure comfortable viewing under ambient lighting.^[73] This metric is crucial for assessing the perceived brightness of screens, road signs, and illuminated surfaces, incorporating the eye's sensitivity via V(\lambda).^[71] Illuminance, E_v, describes the luminous flux incident on a surface per unit area, measured in lux (lx), where 1 lx = 1 lm/m². It guides lighting design; for instance, the Illuminating Engineering Society (IES) recommends 300–500 lx for general office work to support visual tasks without fatigue.^[74] Like other photometric quantities, it is derived from radiant flux weighted by V(\lambda), focusing on the light reaching the eye from illuminated environments.^[69] Color metrics in photometry extend these quantities to hue and saturation, using the CIE 1931 color space, which models human color perception through tristimulus values X, Y, Z. These values are obtained by integrating the light's spectral power distribution with CIE standard observer color-matching functions \bar{x}(\lambda), \bar{y}(\lambda), and \bar{z}(\lambda), where Y corresponds to luminance and aligns with V(\lambda) since \bar{y}(\lambda) = V(\lambda).^[75] Chromaticity coordinates x and y are derived as x = X/(X+Y+Z) and y = Y/(X+Y+Z), plotting colors on a two-dimensional diagram that excludes brightness, enabling precise specification of light color for applications like displays and photography.^[76]

Radiometric Quantities

Radiometric quantities provide objective measures of electromagnetic radiation's energy, focusing on physical properties such as power and intensity across the full spectrum, without regard to human visual sensitivity. These quantities form the basis for quantifying light in physics, astronomy, and engineering applications, enabling precise calculations of energy transfer in optical systems. Unlike photometric measures, radiometric ones integrate over all wavelengths and directions to capture total radiant energy.^[77] The fundamental radiometric quantity is radiant flux, denoted Φ_e, which represents the total power of electromagnetic radiation emitted, transmitted, or received by a source or surface, measured in watts (W). It accounts for the integrated energy over all wavelengths and solid angles, serving as the starting point for deriving other quantities in radiometry. For instance, the radiant flux from a light source determines its overall energetic output in free space.^[78] Radiance, denoted L_e, quantifies the directional distribution of radiant flux, defined as the power per unit solid angle per unit projected area perpendicular to the direction of propagation, with units of watts per steradian per square meter (W/sr/m²). This quantity is conserved along a ray in lossless media, making it essential for analyzing light propagation through optical systems without changes in intensity due to distance or focusing. Radiance thus provides a measure of a source's brightness independent of distance.^[79] Irradiance, denoted E_e, measures the radiant flux incident on a surface per unit area, expressed in watts per square meter (W/m²). It describes the power density from incoming radiation, crucial for assessing energy delivery to detectors or materials. A key example is the solar constant, the mean irradiance from the Sun at Earth's orbit on a surface normal to the rays, valued at approximately 1361.6 W/m² during solar minimum conditions.^[80] Spectral radiometric quantities extend these definitions to specific wavelengths or frequencies, allowing analysis of radiation's distribution across the spectrum. Spectral radiance B(λ, T), for a blackbody at temperature T, is given by Planck's law:

B(\lambda, T) = \frac{2hc^2}{\lambda^5} \frac{1}{e^{hc / \lambda kT} - 1}

where h is Planck's constant, c is the speed of light, k is Boltzmann's constant, and λ is wavelength; this equation describes the maximum possible spectral radiance at thermal equilibrium, forming the basis for calibrating broadband sources. Integrating spectral quantities over wavelength yields total radiometric values, encompassing the full electromagnetic spectrum./29%3A_Atomic_Physics/29.1%3A_Overview) Detection of radiometric quantities relies on specialized instruments that convert radiant energy into measurable electrical signals. Photodiodes operate via the photoelectric effect, generating current proportional to incident photon flux in the visible and near-infrared ranges, offering high speed and quantum efficiency for spectral irradiance measurements. Bolometers detect radiation through temperature-induced resistance changes in absorptive materials, suitable for broadband thermal detection across infrared wavelengths. For absolute calibration, cryogenic radiometers employ electrical substitution at low temperatures (near 5 K), equating absorbed optical power to equivalent electrical heating with uncertainties below 0.01%, serving as primary standards traceable to SI units. These detectors ensure accurate realization of radiometric scales in metrology.^[81]^[82]^[83]

Light-Matter Interactions

Absorption and Scattering

When light interacts with matter, absorption occurs as photons are captured by atoms or molecules, converting the light's energy into other forms such as heat or electronic excitation. This process reduces the intensity of the transmitted light and is quantitatively described by the Beer-Lambert law, which states that the transmitted intensity I through a medium of thickness x is given by

I = I_0 e^{-\alpha x},

where I_0 is the initial intensity and \alpha is the absorption coefficient, dependent on the material and wavelength.^[84] This law, originally formulated by Pierre Bouguer in 1729 and refined by August Beer in 1852, applies to dilute solutions and homogeneous media where scattering is negligible. In absorbing media, the energy transfer often leads to thermal heating via vibrational relaxation or to excited states that may re-emit light at different wavelengths, though the primary effect is energy dissipation.^[85] Scattering, in contrast, redirects light without net energy loss per photon but randomizes its direction, contributing to phenomena like the diffusion of light in atmospheres or tissues. For particles much smaller than the light wavelength (typically < 0.1 times the wavelength), Rayleigh scattering dominates, with scattered intensity proportional to $1/\lambda^4, where \lambda is the wavelength; this strong wavelength dependence explains the blue color of the daytime sky, as shorter blue wavelengths (~450 nm) scatter more efficiently than longer red ones (~650 nm) by molecules like nitrogen and oxygen.^[86] For larger particles comparable to or exceeding the wavelength, such as water droplets in clouds (diameters ~10–20 μm), Mie scattering prevails, scattering all visible wavelengths more uniformly and resulting in the white appearance of clouds, though with forward-biased patterns that enhance brightness when viewed from below.^[87] A specialized form of scattering, Raman scattering, is inelastic and involves a frequency shift due to energy exchange with molecular vibrations or rotations. The shift \Delta \nu = \nu_0 - \nu_s, where \nu_0 is the incident frequency and \nu_s the scattered frequency, corresponds to vibrational energy levels (typically 50–8000 cm⁻¹), enabling non-destructive probing of molecular structures.^[88] Discovered by C. V. Raman in 1928, this effect is weak (~10⁻⁶ of incident intensity) but crucial for spectroscopy, as the shifted light carries chemical information without requiring sample preparation.^[89] In Earth's atmosphere, these processes combine to produce striking visual effects. During sunsets, sunlight traverses a longer path through the air, enhancing scattering of shorter wavelengths and allowing longer red and orange wavelengths to dominate the direct beam, as red light scatters least under Rayleigh conditions.^[90] Absorption and scattering also underpin spectroscopy applications, such as analyzing absorption lines in stellar spectra—dark features where specific wavelengths are removed by intervening gas clouds or stellar atmospheres—revealing compositions like hydrogen and helium in stars via Fraunhofer lines.

Radiation Pressure

Radiation pressure refers to the mechanical force exerted by electromagnetic radiation, such as light, on matter due to the transfer of momentum from photons. In the quantum description, a single photon carries momentum p = \frac{E}{[c](/page/Speed_of_light)} = \frac{h f}{[c](/page/Speed_of_light)}, where E is the photon's energy, [c](/page/Speed_of_light) is the speed of light in vacuum, h is Planck's constant, and f is the frequency. This relation arises from the relativistic energy-momentum equivalence for massless particles, where E = p [c](/page/Speed_of_light). When light interacts with a surface, the momentum transfer results in pressure; for perfect absorption, the pressure P equals the intensity I divided by [c](/page/Speed_of_light), or P = \frac{I}{[c](/page/Speed_of_light)}, while for perfect reflection, it doubles to P = \frac{2I}{[c](/page/Speed_of_light)}. These expressions derive from classical electromagnetic theory, as predicted by James Clerk Maxwell in 1873, and are confirmed in the photon picture. The existence of radiation pressure was first experimentally verified in the early 20th century. Russian physicist Pyotr Lebedev conducted the initial measurements in 1900 using a torsion balance with thin mica vanes suspended in a partial vacuum, detecting a small deflection due to sunlight filtered through a slit. Independently, American physicists Ernest Fox Nichols and Gordon Ferrie Hull performed more precise measurements in 1901, employing a Nichols radiometer to quantify the pressure from arc lamp light on delicately balanced mirrors, achieving results within 1% of theoretical predictions. These experiments provided crucial empirical support for the momentum-carrying nature of light. One natural manifestation of radiation pressure is observed in the dust tails of comets, where solar photons push micron-sized dust particles away from the Sun, forming curved, yellowish tails distinct from the ion tails driven by solar wind. This effect is particularly evident as comets approach perihelion, with the pressure accelerating smaller grains outward while larger ones lag behind due to gravity. In technological applications, radiation pressure enables propulsion for solar sails, ultra-lightweight reflective sheets that harness sunlight for thrust without fuel; the acceleration a = \frac{2 P A}{m} (where A is sail area and m is spacecraft mass) allows gradual velocity increases, as demonstrated in missions like Japan's IKAROS sail in 2010 and NASA's Advanced Composite Solar Sail System (ACS3), launched in 2024.^[91] Another application is optical tweezers, developed by Arthur Ashkin in 1986, for which he shared the 2018 Nobel Prize in Physics, which use focused laser beams to trap and manipulate microscopic particles via gradient forces \mathbf{F} = \frac{n}{2c} \alpha \nabla E^2, where n is the refractive index, \alpha is polarizability, and E is the electric field strength; this technique has revolutionized single-molecule studies in biology.^[92]

Historical Development

Ancient and Classical Theories

Ancient civilizations developed early qualitative theories of light and vision, primarily through philosophical and observational means, without quantitative experimentation or distinctions between wave and particle natures. In ancient Greece around 300 BCE, Euclid formalized geometric optics in his treatise Optica, postulating that light propagates in straight lines via visual rays emanating from the eye, which he used to explain reflection and the apparent size of objects based on the angle subtended by these rays.^[93] This extramission theory, where sight results from rays emitted by the observer, was endorsed by Plato and Euclid, contrasting with the intromission view that light enters the eye from external sources.^[94] Aristotle, in the 4th century BCE, challenged pure extramission by proposing an intromission theory in works like De Anima, arguing that vision occurs when transparent media transmit forms or "species" from objects into the eye, facilitated by light as an active agent that actualizes potential transparency in air and other media.^[95] This sparked ongoing debates between emission (extramission) and intromission theories, with Aristotle emphasizing light's role in enabling perception without rays originating solely from the eye, though he retained elements of both.^[96] Meanwhile, in ancient China during the 5th century BCE, the philosopher Mozi described pinhole imaging in the Mozi text, observing that light rays entering a small aperture in a dark room project an inverted image of external objects, demonstrating straight-line propagation without invoking vision theories.^[97] In ancient India, contributions to optics emerged alongside medical texts. The Sushruta Samhita, attributed to Sushruta around the 6th century BCE, detailed ophthalmological procedures including cataract surgery.^[98] In the Vaisheshika school, founded by Kanada around the 6th century BCE, light was conceived as streams of fine, high-velocity particles known as tejas (fire atoms), which propagate in straight lines and enable vision by entering the eye from luminous sources, aligning with intromission ideas.^[99] During the Hellenistic period, Ptolemy's Optics (2nd century CE) built on Euclidean geometry by compiling empirical tables of refraction angles for light passing from air to water and glass, using an experimental setup to measure incidence and refraction, though his data showed inaccuracies due to observational limits.^[100] This work treated light rays as straight lines bent at interfaces, focusing on visual perception without resolving emission debates. In the Islamic Golden Age, Ibn al-Haytham (Alhazen) revolutionized the field in his 11th-century Book of Optics, decisively supporting intromission by refuting extramission through experiments with camera obscura, where light from objects forms images on screens without eye involvement, establishing that vision results from rays entering the eye.^[101] Medieval European scholars synthesized these ideas, with Witelo's Perspectiva (late 13th century) providing a comprehensive Latin treatise on optics, drawing heavily from Alhazen and Ptolemy to explore ray propagation, refraction, and perspective in vision, treating light as quantifiable rays for geometric analysis.^[102] These pre-modern theories remained largely qualitative and philosophical, emphasizing geometric rays and vision mechanisms through observation and deduction, setting the stage for later experimental transitions without yet distinguishing wave or particle behaviors.^[103]

17th-19th Century Theories

In the 17th century, René Descartes proposed an emission theory of light in his work La Dioptrique (1637), positing that light consists of particles propelled instantaneously through a medium of swirling vortices composed of subtle matter, which accounted for phenomena like refraction as mechanical pressures within these cosmic eddies.^[104] This corpuscular model emphasized light's propagation as a direct emission from luminous sources, aligning with mechanistic philosophy but assuming infinite speed to explain observations without delay.^[105] Isaac Newton advanced the particle theory in his seminal Opticks (1704), describing light as streams of minute, elastic particles that obey laws of motion similar to projectiles.^[106] Newton explained refraction not as a change in speed but as the particles' deviation due to attractive forces exerted by denser media, such as glass pulling particles toward it with varying intensity based on their inherent "sides" or properties, which also accounted for color dispersion in prisms.^[107] This framework unified reflection as elastic collisions and supported the corpuscular view by fitting empirical data from his prism experiments, though it struggled with later diffraction observations. Countering the particle model, Christiaan Huygens introduced a wave theory in his Traité de la Lumière (written in 1678, published 1690), conceiving light as longitudinal pressure waves propagating through an elastic ether—a pervasive, subtle medium filling space.^[108] Huygens derived the laws of reflection and refraction geometrically using the concept of secondary wavelets emanating from each point on a wavefront, with the tangent to these wavelets forming the new wavefront, thus explaining light's rectilinear path as the envelope of expanding spherical pulses in the ether.^[109] His approach anticipated diffraction as interference among wavelets but lacked quantitative detail for it, emphasizing instead the finite speed of light consistent with astronomical delays. The wave theory gained empirical traction in the early 19th century through Thomas Young's double-slit experiment (1801), which demonstrated interference patterns of alternating bright and dark fringes when light passed through two closely spaced apertures, a phenomenon attributable solely to the superposition of coherent wave trains rather than particle streams.^[110] Building on this, Augustin-Jean Fresnel developed a mathematical formulation of diffraction in 1818, applying Huygens' principle with interference to predict the intensity distribution around obstacles, such as the bright spot at the center of a circular shadow (Poisson's spot), which decisively refuted Newton's particle model through precise calculations matching observations.^[111] Fresnel's equations for oblique diffraction integrated Young's interference with wave propagation, solidifying the wave nature by quantifying how secondary sources constructively or destructively combine. The particle-wave debate culminated in classical unification with James Clerk Maxwell's electromagnetic theory (1865), which portrayed light as transverse electromagnetic waves arising from oscillating electric and magnetic fields in the ether, governed by coupled partial differential equations.^[26] Maxwell derived the wave speed as c = \frac{1}{\sqrt{\epsilon_0 \mu_0}}, where \epsilon_0 and \mu_0 are the permittivity and permeability of free space, yielding a value matching astronomical measurements of light's velocity and thereby identifying light as an electromagnetic disturbance without invoking separate particles or longitudinal pressures.^[26] This synthesis reconciled optics with electricity and magnetism, establishing a comprehensive classical framework for light's propagation and interactions.

20th Century and Modern Theories

The advent of quantum theory in the early 20th century revolutionized the understanding of light by resolving paradoxes in classical electromagnetism, particularly through the quantization of energy. In 1900, Max Planck introduced the concept of discrete energy quanta to explain blackbody radiation, proposing that oscillators emit and absorb energy in multiples of h\nu, where h is Planck's constant and \nu is the frequency, marking the birth of quantum mechanics.^[112] This quantization addressed the ultraviolet catastrophe predicted by classical theory. Building on this, Albert Einstein extended the idea to light itself in 1905, interpreting the photoelectric effect as evidence for light quanta, or photons, each carrying energy E = h\nu, independent of intensity, which explained why light ejects electrons only above a threshold frequency.^[113] Einstein's photon hypothesis unified wave and particle descriptions, earning him the 1921 Nobel Prize.^[114] Subsequent developments integrated quantum principles into atomic structure and extended duality to matter. In 1913, Niels Bohr proposed a model of the hydrogen atom where electrons occupy discrete energy levels, and light emission occurs via quantized transitions between these levels, producing spectral lines that matched observations.^[115] This model incorporated Planck's quanta to stabilize the atom against classical radiation losses. In 1924, Louis de Broglie generalized wave-particle duality by hypothesizing that all matter, like light, exhibits wave properties, with wavelength \lambda = h/p where p is momentum, laying the foundation for wave mechanics.^[116] These ideas culminated in the full quantum mechanical framework by the late 1920s, where light's dual nature became central. Relativity provided another pillar, redefining light's role in spacetime. Einstein's 1905 special relativity posited the invariance of light speed c in vacuum for all inertial observers, leading to time dilation and length contraction, and establishing light as the universal speed limit. In general relativity (1915), light follows null geodesics—paths where the spacetime interval is zero—defining light cones that delineate causal boundaries in curved spacetime, explaining gravitational lensing and time delays in light propagation.^[117] Quantum electrodynamics (QED), developed in the 1940s, emerged as the relativistic quantum field theory of light and matter interactions. Richard Feynman's path integral formulation, along with contributions from Julian Schwinger and Sin-Itiro Tomonaga, described electromagnetic interactions via virtual photon exchange, achieving unprecedented precision, such as in the anomalous magnetic moment of the electron.^[118] The fine structure constant \alpha \approx 1/137, a dimensionless measure of electromagnetic coupling strength, governs these processes and remains a fundamental parameter in QED.^[119] Modern theories, encompassed by quantum optics, explore light's quantum states and correlations. Coherent states, introduced by Roy Glauber in the 1960s, describe laser light as minimum-uncertainty Gaussian wavepackets, enabling precise quantum descriptions of optical fields.^[120] Squeezed states, first theoretically proposed in the 1970s and experimentally realized in the 1980s, reduce uncertainty in one quadrature below the vacuum limit at the expense of the other, enhancing precision in interferometry and gravitational wave detection.^[120] Photon entanglement, demonstrating non-local correlations, was experimentally confirmed in Bell tests by Alain Aspect in 1982, violating classical inequalities and supporting quantum mechanics over local hidden variables.^[121] By 2025, these frameworks remain foundational, with no paradigm-shifting theoretical advances in light's nature, though applications in quantum information continue to evolve.

Applications and Uses

Technological Applications

Optical devices harness the principles of light propagation and focusing to achieve high-resolution imaging and signal transmission. Microscopes, for instance, enable detailed examination of specimens but are constrained by the Abbe diffraction limit, which sets the smallest resolvable distance at approximately half the wavelength of visible light used for illumination, typically around 200-300 nanometers for standard optical systems.^[122] Telescopes, divided into refractors that use lenses to bend incoming light rays and focus them at a focal point, and reflectors that employ curved mirrors to gather and redirect light for imaging distant celestial objects, allow astronomers to observe faint stars and galaxies by collecting light over large apertures.^[123] Fiber optics rely on total internal reflection, where light signals propagate within a core of higher refractive index surrounded by a cladding of lower index, preventing leakage and enabling high-speed data transmission over long distances with minimal loss.^[124] In communications, lasers serve as coherent light sources in fiber optic networks, achieving remarkably low attenuation of less than 0.2 dB per kilometer at wavelengths around 1550 nanometers, which supports terabit-per-second data rates across global infrastructures.^[125] LiDAR systems, utilizing pulsed laser beams to measure distances via time-of-flight calculations, produce precise three-dimensional maps for applications such as autonomous vehicle navigation and topographic surveying, with resolutions down to centimeters over kilometers.^[126] Imaging technologies exploit light's wave properties for capturing visual information. Photography balances light exposure through the interplay of aperture size, shutter speed, and sensor sensitivity (ISO), ensuring optimal brightness and depth of field in recorded images.^[127] Holography records the interference patterns between object-scattered light and a coherent reference beam on a photosensitive medium, reconstructing three-dimensional images upon illumination that preserve parallax and depth cues.^[128] In energy applications, photovoltaics convert sunlight into electricity through the photovoltaic effect in semiconductor materials, where efficiency is optimized by matching the solar spectrum to the material's bandgap energy, with record efficiencies for crystalline silicon cells reaching 27.8% as of mid-2025 under standard test conditions.^[129] Medical procedures leverage light for minimally invasive interventions. Endoscopy employs flexible fiber optic bundles or rigid scopes to deliver illumination deep into the body, allowing real-time visualization of internal organs during diagnostics and surgeries.^[130] Laser surgery utilizes targeted absorption of laser energy by tissue chromophores, leading to precise ablation where the irradiated material is vaporized or removed layer by layer with minimal thermal damage to surrounding areas.^[131]

Biological and Environmental Roles

Light plays a fundamental role in biological processes and environmental systems on Earth, enabling energy transfer, physiological regulation, and ecological balance. In living organisms, light drives essential functions such as photosynthesis and vision, while in the broader environment, it influences climate dynamics and ecosystem interactions. These roles highlight light's integration into natural cycles, from sustaining primary production to shaping evolutionary adaptations. Photosynthesis, the process by which plants, algae, and cyanobacteria convert light energy into chemical energy, relies on chlorophyll pigments that absorb specific wavelengths of light. Chlorophyll a in photosystem II (PSII) has an absorption peak at 680 nm (P680), while in photosystem I (PSI) it peaks at 700 nm (P700), allowing efficient capture of red light for electron excitation in reaction centers.^[132] This light-driven process splits water molecules to produce oxygen and fuels the Calvin cycle, summarized by the equation:

$6CO_2 + 6H_2O \xrightarrow{\text{light}} C_6H_{12}O_6 + 6O_2

where carbon dioxide and water yield glucose and oxygen, supporting nearly all life through oxygenic photosynthesis that originated in ancient cyanobacteria.^[133] In animal vision, light regulates circadian rhythms via intrinsically photosensitive retinal ganglion cells containing melanopsin, which is particularly sensitive to blue light around 480 nm, synchronizing biological clocks to day-night cycles.^[134] Disruptions from reduced winter light exposure can lead to seasonal affective disorder (SAD), characterized by depressive symptoms linked to melanopsin pathway variations and altered sleep timing.^[135] Within ecosystems, ultraviolet (UV) radiation facilitates vitamin D synthesis in the skin of vertebrates upon exposure to UVB wavelengths (290-320 nm), essential for calcium metabolism and immune function across food webs.^[136] Infrared radiation contributes to heat balance by warming surfaces and atmospheres, maintaining thermal equilibria in habitats from forests to oceans through absorption and re-emission.^[137] However, artificial light pollution disorients nocturnal migrants, such as birds, drawing them into urban areas and increasing collision risks during seasonal journeys.^[138] Solar radiation powers global weather patterns by heating the atmosphere unevenly, driving convection, winds, and precipitation cycles that distribute energy across latitudes.^[139] Albedo effects amplify this in polar regions, where melting ice caps reduce reflectivity—from about 0.8 for snow to 0.1 for open water—absorbing more solar energy and accelerating warming through positive feedback.^[140] Evolutionary adaptations to light have shaped diverse organisms, with light-harvesting complexes in photosynthetic species evolving to optimize fluctuating light environments for energy capture.^[141] In light-scarce deep-sea habitats, bioluminescence has independently evolved in approximately 76% of metazoans, enabling predation, camouflage, and communication via luciferin-luciferase reactions that mimic or counter faint downwelling light.^[142]

References

[1]
1. Introduction - What is light?
Light is defined as the electromagnetic radiation with wavelengths between 380 and 750 nm which is visible to the human eye.
[2]
Visible Light - NASA Science
Aug 4, 2023 · Typically, the human eye can detect wavelengths from 380 to 700 nanometers. WAVELENGTHS OF VISIBLE LIGHT. All electromagnetic radiation is light ...
[3]
speed of light in vacuum - CODATA Value
Numerical value, 299 792 458 m s ; Standard uncertainty, (exact) ; Relative standard uncertainty, (exact).
[4]
The Nature of Light - The Physics Hypertextbook
Light is a transverse, electromagnetic wave, produced by incandescence or luminescence, with a fixed speed in a vacuum, and its frequency relates to color.Summary · Practice · Problems · Diffraction and Interference
[5]
What is Light - An overview of the properties of light
Light is electromagnetic radiation, detectable by the human eye, and described as fluctuations of electric and magnetic fields, or as photons.
[6]
Canon Science Lab | Light is It a Wave or a Particle?
Now that the dual nature of light as "both a particle and a wave" has been proved, its essential theory was further evolved from electromagnetics into quantum ...
[7]
The Basics of Light - William P. Blair
Light is nature's way of transferring energy through space. We can complicate it by talking about interacting electric and magnetic fields, quantum mechanics, ...
[8]
Anatomy of an Electromagnetic Wave - NASA Science
Aug 3, 2023 · A changing magnetic field will induce a changing electric field and vice-versa—the two are linked. These changing fields form electromagnetic ...
[9]
Wavelength, Frequency, and Energy - Imagine the Universe! - NASA
Listed below are the approximate wavelength, frequency, and energy limits of the various regions of the electromagnetic spectrum.
[10]
The Electromagnetic Spectrum: A History | Spectroscopy Online
Mar 1, 2007 · David Ball discusses how the electromagnetic spectrum was originally mapped out and what this means for spectroscopy.
[11]
The Science of Color - Smithsonian Libraries
In the 1660s, English physicist and mathematician Isaac Newton began a series of experiments with sunlight and prisms. He demonstrated that clear white ...Missing: authoritative | Show results with:authoritative
[12]
Additive Color Mixing | Additive Color Models - X-Rite
Jul 15, 2022 · The human eye mixes the three RGB additive primary colors – red, green, and blue – in various combinations and intensities to simulate the full range of colors ...Missing: authoritative source
[13]
Subtractive CMYK Color Mixing | Color Models - X-Rite
Sep 28, 2020 · Combining two pure additive primaries produces a subtractive primary. · When two subtractive primaries overlap, an additive primary is produced.
[14]
Human Vision and Color Perception - Evident Scientific
When fully light-adapted, the human eye features a wavelength response from around 400 to 700 nanometers, with a peak sensitivity at 555 nanometers (in the ...Missing: authoritative | Show results with:authoritative
[15]
Cones and Color Vision - Neuroscience - NCBI Bookshelf - NIH
In fact, individual cones, like rods, are entirely color blind in that their response is simply a reflection of the number of photons they capture, regardless ...Missing: low- authoritative
[16]
Radiation Basics | US EPA
Sep 10, 2025 · Non-ionizing radiation has enough energy to move atoms in a molecule around or cause them to vibrate, but not enough to remove electrons from ...Missing: authoritative | Show results with:authoritative
[17]
Visible Light Part I. Properties and Cutaneous Effects of Visible Light
Photons from visible light are absorbed by photoreceptive chromophores (eg, melanin, heme, and opsins), altering skin function by activating and imparting ...
[18]
2009 Edition Chapter 4D. Traffic Control Signal Features - MUTCD
Traffic signal features include location, design, and meaning of indications. Signals can be circular or arrow, with red, yellow, or green colors, and operate ...
[19]
[PDF] Paris 1676: The discovery of the velocity of light and the roles of ...
That the propagation of light takes place with a finite velocity was discovered in 1676 at the Paris Observatory and published soon after by Ole Rømer (1644- ...
[20]
July 1849: Fizeau Publishes Results of Speed of Light Experiment
Jul 1, 2010 · He built an apparatus in which a cogwheel and a mirror were placed eight kilometers apart, and then sent pulses of light between them. He would ...Missing: source | Show results with:source
[21]
Michelson's Speed of Light Measurement - Mount Wilson Observatory |
Mount Wilson served as the launch site for a brilliant beam of light that shone across the San Gabriels, bounced from a return mirror located on a side ridge.Missing: 1926 source<|control11|><|separator|>
[22]
Speed of Light - Evident Scientific
Physicists point out that the actual speed of light as measured by Roemer and his followers has not significantly changed, but rather point to a series of ...Missing: Rømer primary
[23]
[PDF] ON THE ELECTRODYNAMICS OF MOVING BODIES - Fourmilab
This edition of Einstein's On the Electrodynamics of Moving Bodies is based on the English translation of his original 1905 German-language paper. (published as ...
[24]
Refractive Index (Index of Refraction) | Nikon's MicroscopyU
Refractive Index (Index of Refraction) is a value calculated from the ratio of the speed of light in a vacuum to that in a second medium of greater density.
[25]
A Modern Perspective on Wave/Particle Duality - quant-ph - arXiv
Apr 14, 2001 · We review studies of the fluctuations of light made accessible by the invention of the laser and the strong interactions realized in cavity QED experiments.
[26]
VIII. A dynamical theory of the electromagnetic field - Journals
The theory assumes bodies have states that act at a distance, and the force depends on their relative position and electric/magnetic condition.
[27]
[PDF] Einstein's Proposal of the Photon Concept-a Translation
Of the trio of famous papers that Albert Einstein sent to the Annalen der Physik in 1905 only the paper proposing the photon concept has been unavailable in ...
[28]
[PDF] A Quantum Theory of the Scattering of X-Rays by Light Elements
Compton, Bull. Nat. Research Council, No. 20, p. 10 (Oct., 1922). Page 2. SCATTERING OF X-RAYS BY LIGHT ELEMENTS. 485 been able to show that only a small part ...
[29]
Young's double-slit interference demonstration with single photons
Apr 1, 2024 · This article presents a table-top experiment that acquires the interference pattern from single photons passing through a double-slit.
[30]
[PDF] Louis de Broglie - Nobel Lecture
Thus to describe the properties of matter as well as those of light, waves and corpuscles have to be referred to at one and the same time. The electron can ...
[31]
26 Optics: The Principle of Least Time - Feynman Lectures - Caltech
His idea is this: that out of all possible paths that it might take to get from one point to another, light takes the path which requires the shortest time. Let ...
[32]
Specular vs. Diffuse Reflection - The Physics Classroom
Reflection off of rough surfaces such as clothing, paper, and the asphalt roadway leads to a type of reflection known as diffuse reflection.
[33]
Refraction of Light - HyperPhysics
Snell's Law relates the indices of refraction n of the two media to the directions of propagation in terms of the angles to the normal. Snell's law can be ...
[34]
Total Internal Reflection - HyperPhysics Concepts
The critical angle can be calculated from Snell's law by setting the refraction angle equal to 90°. Total internal reflection is important in fiber optics and ...Missing: source | Show results with:source
[35]
1.4 Total Internal Reflection - University Physics Volume 3 | OpenStax
Sep 29, 2016 · Total internal reflection occurs for any incident angle greater than the critical angle θ c θ c , and it can only occur when the second medium ...Missing: source | Show results with:source
[36]
Mirages - Physics Tutorial
A mirage is an optical phenomenon that creates the illusion of water and results from the refraction of light through a non-uniform medium.
[37]
Huygens' principle
One of the changes made to Huygens' original model is to make the amplitude of these mini-waves dependent on the angle relative to the original source. My ...
[38]
[PDF] Huygens's wave propagation principle corrected
Huygens's principle that each point on a wave front represents a source of spherical waves is conceptually useful but is incomplete; the backward parts of the ...
[39]
Single slit diffraction
Here we are asked to solve this equation for w. Details of the calculation: First minimum: w sinθ = λ, w = (400 nm)/sin(4*10-3 radians) = 1*10-4 m.Missing: original | Show results with:original
[40]
Resolving power
The minimum angular separation of two objects which can just be resolved is given by θmin = 1.22 λ/D, where D is the diameter of the aperture. The factor of 1. ...
[41]
27.3 Young's Double Slit Experiment – College Physics
The distance between adjacent fringes is Δy = xλ/d, assuming the slit separation d is large compared with λ. 14: Using the result of the problem above, ...
[42]
Polarization
An ideal polarizer passes Eparallel and absorbs Eperpendicular. Itransmitted = I0 cos2θ. This is called the law of Malus. If θ = 90o the transmitted intensity ...
[43]
Diffraction Grating - HyperPhysics
The diffraction grating is an immensely useful tool for the separation of the spectral lines associated with atomic transitions. It acts as a "super prism", ...
[44]
Conditions for Interference - Physics
The sources of the waves must be coherent, which means they emit identical waves with a constant phase difference. · The waves should be monochromatic - they ...
[45]
Radiation Laws
The primary law governing blackbody radiation is the Planck Radiation Law, which governs the intensity of radiation emitted by unit surface area into a fixed ...
[46]
Blackbody Radiation - HyperPhysics
The Planck radiation formula is an example of the distribution of energy according to Bose-Einstein statistics. The above expressions are obtained by ...
[47]
Black-Body Radiation - AstroBaki - CASPER
Sep 3, 2021 · The frequency content of blackbody radiation is given by the Planck Function: B ν = 2 h ν 3 c 2 ( e h ν k T − 1 ) {\displaystyle B_{\nu }={2h\ ...
[48]
Blackbody Radiation | ASTRO 801: Planets, Stars, Galaxies, and the ...
A blackbody that is twice as hot as the sun (about 12000 K) would have the peak of its spectrum occur at about 250 nanometers, which is in the UV part of the ...
[49]
Volcanoes, Magma, and Volcanic Eruptions - Tulane University
Sep 14, 2015 · Basaltic magma - 1000 to 1200oC; Andesitic magma - 800 to 1000oC; Rhyolitic magma - 650 to 800oC. Viscosity of Magmas. Viscosity ...
[50]
Remotely measuring the temperature of Kīlauea lava - USGS.gov
Remotely measuring the temperature of Kīlauea lava ... temperature range of an object based on the color of its incandescent glow.
[51]
What makes stars shine - StarChild - NASA
Every second, a star like our Sun converts 4 million tons of its material into heat and light through the process of nuclear fusion. The Details. Our Sun has ...
[52]
Stars - StarChild - NASA
A star is a brilliantly glowing sphere of hot gas whose energy is produced by an internal nuclear fusion process. Stars are contained in galaxies.
[53]
Auroras - NASA Science
Feb 4, 2025 · Auroras are vibrant light displays created when energetic particles from the Sun interact with Earth's magnetic field and atmosphere.
[54]
Aurora Dancing in the Night - NASA Earth Observatory
Jan 5, 2004 · Where does the auroral light come from? Most of the light is emitted by oxygen atoms excited from bombardment by charged solar particles.
[55]
[PDF] Lightning - Coalition for Plasma Science
Lightning is a high-current electric discharge in air, releasing most of its energy in pulses about one-hundred-millionth of a second long. With its length ...
[56]
Getting a Charge Out of Life! - Physical Sciences Laboratory - NOAA
You can see streaks of lightning because the air in the lightning discharge becomes ionized into what is referred to as plasma. Lightning causes hundreds of ...
[57]
Bioluminescence Color-Tuning Firefly Luciferases - NIH
Jun 10, 2022 · Firefly luciferases produce yellow-green light, changing to red under acidic conditions, high temperatures, or heavy metals, making them useful ...
[58]
[PDF] Description of the bioluminescent emission spectrum of <i ...
Jun 30, 2023 · Colors of firefly bioluminescence range widely from green (~546 nm) through yellow and orange (~590 nm), even though the luciferin is identical ...
[59]
Bioluminescence Questions and Answers | Latz Laboratory
The luciferase acts as an enzyme, allowing the luciferin to release energy as it is oxidized. The color of the light depends on the chemical structures of the ...<|separator|>
[60]
Spectra Lab - Physics - Weber State University
There are three components of a spectrum: continuum emission (or blackbody radiation), emission lines, and absorption lines. Continuum emission is a wide, ...
[61]
Lecture 24: Matter & Light
Oct 19, 2007 · A hot, dense object produces a continuous spectrum(blackbody spectrum). A hot, low-density gas produces an emission-line spectrum. A cool, dense ...Missing: natural | Show results with:natural
[62]
The History of the Light Bulb - Department of Energy
Nov 22, 2013 · Incandescent Bulbs Light the Way Long before Thomas Edison patented -- first in 1879 and then a year later in 1880 -- and began commercializing ...
[63]
Theodore Maiman and the Laser
May 24, 2021 · The development of the laser can be traced to Albert Einstein's concept of “stimulated emission of radiation,” which he put forth in a paper ...
[64]
Incandescent Lamps - RP Photonics
Incandescent lamps use thermal radiation from a heated filament. They are being phased out due to poor energy efficiency.
[65]
Tungsten Filament Lamps – Basic Lighting for Electricians: Level 1
The tungsten filament is used most often with incandescent lamps because it has a high melting point (around 3419°C) and a low rate of evaporation.
[66]
The Fluorescent Lamp - How it Works & History
1901 - Peter Cooper Hewitt developed the first commercial mercury vapor lamp. An electric arc through mercury vapor is the basis for the modern fluorescent lamp ...
[67]
[PDF] Shuji Nakamura - Nobel Lecture
The first efficient blue LED using GaN was achieved in 1993 by Nakamura et al. after overcoming material shortcomings. GaN was grown on sapphire, unlike ZnSe.
[68]
The Five Main Types of Lasers - Laserax
Sep 24, 2021 · Examples of gas lasers include carbon dioxide (CO2) lasers, helium–neon lasers, argon lasers, krypton lasers, and excimer lasers. Gas lasers are ...
[69]
[PDF] Principles governing photometry - 2019 - BIPM
Apr 14, 2019 · The photometric quantities generally used are: • luminous flux,. • luminous intensity,. • luminance,. • illuminance. These quantities are ...
[70]
CIE spectral luminous efficiency for photopic vision
Values of spectral luminous efficiency for photopic vision, V(lambda), lambda in standard air, 1 nm wavelength steps, original source: CIE 018:2019.
[71]
1.7 Basic Photometric Quantities - Gigahertz-Optik
Photometric quantities relate to human perception of light, including luminous flux, intensity, luminance, illuminance, and exitance.
[72]
2.3 PHOTOMETRY - 2.Concepts - Language of Light - Konica Minolta
Luminous flux is the flow of light energy. Luminous intensity is power per solid angle. Illuminance is flux concentration on a surface. Luminance is brightness ...
[73]
Nits vs cd/m²: What's the Difference in Display Brightness ...
May 15, 2025 · How bright should a screen be? · Office or reception area: 250–350 nits · Indoor retail display: 500–700 nits · Window-facing signage: 1,000–1,500 ...
[74]
Illuminance - Recommended Light Levels - The Engineering ToolBox
The light level is more common in the range 500 - 1000 lux - depending on activity. For precision and detailed works the light level may even approach 1500 - ...
[75]
CIE Color System - HyperPhysics
The CIE system characterizes colors by a luminance parameter Y and two color coordinates x and y which specify the point on the chromaticity diagram.
[76]
1931 CIE Chromaticity Diagram - SPIE Digital Library
The tristimulus value Y is used with x and y to indicate luminous reflectance or transmittance. Tristimulus Values to Chromaticity Coordinates x=X(X+Y+Z) ...
[77]
Radiometry and Photometry: Review for Vision Optics | NIST
Jan 1, 2000 · Radiometry is the measurement of optical radiation, which is electromagnetic radiation in the frequency range between 3 x 10 11 Hz and 3 x 10 16 Hz.
[78]
[PDF] A national measurement system for radiometry, photometry, and ...
convenience for understanding the often confusing radiometric and photometric terms. Table 1. This table gives the radiometric and photometric quantities, their ...
[79]
Radiance - RP Photonics
Radiance is a radiometric quantity. It can be defined both for light sources and for light arriving at some location.Radiance of Arriving Light · Example: Radiance of Sunlight...
[80]
Solar Irradiance Science | Earth - NASA
The current TSI value from the TSIS-1 is 1361.6 ± 0.3 Wm-2 for the 2019 solar minimum. The 96% of spectral solar irradiance (SSI), over ultraviolet, visible, ...
[81]
Optical Sensors in Radiometry – Technical Review - izakscientific
May 20, 2025 · Optical sensors in radiometry include quantum detectors like photodiodes, thermal detectors like bolometers, and photoemissive sensors like ...
[82]
A Cryogenic Radiometer for Absolute Radiometric Measurements
This paper describes a new electrical-substitution absolute radiometer operating at 5 K, based on a standard commercial helium cryostat.Missing: bolometers | Show results with:bolometers
[83]
Comparison of Two Cryogenic Radiometers at NIST - PMC
For this comparison, each radiometer calibrated two photodiode trap detectors for spectral responsivity. The calibration values for the two trap detectors ...Missing: bolometers | Show results with:bolometers
[84]
Beer–Lambert law for optical tissue diagnostics: current state ... - NIH
Oct 28, 2021 · Beer's law states that absorbance of monochromatic light in a homogeneous (transparent) medium via it travels through is directly proportional ...
[85]
[PDF] Beer's Law: Determining the Concentration of a Solution
The more Allura Red there is, the greater the absorption of green light. Thus, absorbance can be measured and the quantity of dye can be determined. The primary ...
[86]
Why Is the Sky Blue? | NASA Space Place
Blue light is scattered more than the other colors because it travels as shorter, smaller waves. This is why we see a blue sky most of the time.
[87]
6.12 What about scattering? | METEO 300 - Dutton Institute
For x = 0.2 to 2000, we have Mie scattering. Mie scattering is when the particle size is comparable to the size of the radiation wavelength, such as many ...
[88]
Raman Techniques: Fundamentals and Frontiers - PMC
The Raman effect originates from the inelastic scattering of light, and it can directly probe vibration/rotational-vibration states in molecules and materials.
[89]
ramanspectroscopy
Raman shifts range in wavenumber 50-8000 cm-1, characteristic of molecular vibration. A plot of the intensity of the shifted light versus frequency results in a ...
[90]
The Appearance of the Sky - UCAR Center for Science Education
The colors we see in the sky come from sunlight that is scattered by molecules in the atmosphere. This process is called Rayleigh scattering.
[91]
[PDF] Some Readings in the Early History of Light - UF Physics
Aug 23, 1999 · Euclid postulated visual rays to be straight lines, and he defined the apparent size of an object in terms of the angle formed by the rays drawn ...
[92]
Theories of light; theories of vision - Brandeis
One of the foremost proponents of this theory was Euclid, whose contributions to geometry you probably know about; Aristotle and Plato also subscribed to this ...Missing: ancient | Show results with:ancient
[93]
[PDF] Of Philosophers and the Color Blue - Princeton University
Aristotle was a proponent of the intromission theory of vision. Like the proponents of the extramission theory of vision, he presupposed the existence of a ...
[94]
3 The Fire That Comes from the Eye One of the earliest ideas about ...
Instead, Aristotle developed a rather complicated intromission theory ... Alhazen's intromission theory of vision, which combines elements of earlier intromission.
[95]
https://assets.press.princeton.edu/chapters/s8369.pdf
[96]
Sushruta in 600 B.C. introduced extraocular expulsion of lens material
Aug 7, 2025 · Sushruta (600 BCE) might be considered as the a precursor of ECCE, however, he only described a paracentesis, and some extraocular evacuation of ...
[97]
[PDF] History of Indian Science
Jul 31, 2002 · Heat and light rays are taken to consist of very small particles of high ... Aryabhata In his book Aryabhatiyam, Aryabhata (born 476) sketched his.
[98]
[PDF] THE SCIENCE OF OPTICS TO THE TIME OF KEPLER
This applies equally to Plato, Aristotle, Ptolemy, and Galen, all of whom specify color, not light, as the primary object of vision. It also applies to Euclid ...
[99]
[PDF] Ibn al-Haytham and the Origins of Computerized Image Analysis
Prior to al-Haytham, theories of vision could be classified into one of three categories: extramission, intromission, or a combination of the two. Extramission ...
[100]
Optics to the Time of Kepler - Encyclopedia of the History of Science
Accordingly, he argued that the pupil channels the light radiating from every point in the field of view onto the front surface of the crystalline lens. The ...
[101]
[PDF] LightHistory.pdf - Reed College
The Greek philosophers. Pythagoras, Democritus, Empedocles, Plato, Aristotle, and others developed several theories of the nature of light. The rectilinear ...
[102]
[PDF] Vortex Theories in the Early Modern Period - HAL-SHS
May 31, 2023 · Descartes gives an explanation of gravity based on the fact that each planet is also at the center of a vortex of corpuscles of the second ...
[103]
Physical Astronomy for the Mechanistic Universe | Articles and Essays
A depiction of Rene Descartes' vortices. In his theory, the entire universe was filled with elements of different sizes which shifted around each other. At ...
[104]
Opticks: or, A treatise of the reflections, refractions, inflexions and ...
Jan 24, 2018 · A treatise of the reflections, refractions, inflexions and colours of light. Newton, Isaac. Printed for Sam. Smith, and Benj. Walford, London, 1704.
[105]
[PDF] NEWTON'S PARTICLE THEORY OF LIGHT - Galileo
Near an interface, e.g. between air and water, light particles experience an attractive force towards the water. Could this be the cause of refraction? Newton ...
[106]
[PDF] TREATISE ON LIGHT - Thomas Aquinas College
CHRISTIAAN HUYGENS. Rendered into English. By. SILVANUS P. THOMPSON. PREFACE ... To see, consequently, what the refraction will be when the waves of light.
[107]
The Project Gutenberg eBook of Treatise on Light, by Christiaan ...
Treatise on Light in which are explained the causes of that which occurs in reflexion, & in refraction and particularly in the strange refraction of Iceland ...
[108]
Thomas Young and the Nature of Light - American Physical Society
The basic double-slit setup Young proposed has since been used not only to show that light acts like a wave, but also to demonstrate that electrons can act like ...
[109]
July 1816: Fresnel's Evidence for the Wave Theory of Light
But by the early 19th century, the wave theory was making a comeback, thanks in part to the work of a French civil engineer named Augustin-Jean Fresnel.
[110]
[PDF] The Thermal Radiation Formula of Planck (1900) - arXiv
Feb 12, 2004 · Abstract. We review the derivation of Planck's Radiation Formula on the light of recent studies in its centenary. We discuss specially the ...
[111]
Einstein's Proposal of the Photon Concept—a Translation of the ...
Of the trio of famous papers that Albert Einstein sent to the Annalen der Physik in 1905 only the paper proposing the photon concept has been unavailable in ...
[112]
The 1905 Papers - Annus Mirabilis of Albert Einstein
Jul 7, 2025 · In his third paper of 1905, Einstein argues that the speed of light is fixed and not relative to the observer. "...Missing: invariance | Show results with:invariance
[113]
[PDF] 1913 On the Constitution of Atoms and Molecules
This paper is an attempt to show that the application of the above ideas to Rutherford's atom-model affords a basis for a theory of the constitution of atoms.
[114]
[PDF] On the Theory of Quanta Louis-Victor de Broglie (1892-1987)
Mar 7, 2010 · In particular, one has not been able to achieve the ultimate goal, namely a undulatory theory of matter within the framework of field theory.
[115]
[PDF] arXiv:1706.00160v1 [gr-qc] 1 Jun 2017
Jun 1, 2017 · The cosmological constant Λ used to be a freedom in Einstein's theory of general relativity, where one had a proclivity to set it to zero ...
[116]
[PDF] THE DEVELOPMENT OF THE SPACE-TIME VIEW OF QUANTUM ...
But, I was still in love with the original theory, and was still thinking that with it lay the solution to the difficulties of quantum electrodynamics. So, I ...
[117]
Current advances: The fine-structure constant
It is the "coupling constant" or measure of the strength of the electromagnetic force that governs how electrically charged elementary particles (e.g., electron ...Missing: Feynman papers<|separator|>
[118]
A squeezed review on coherent states and nonclassicality for non ...
Jan 3, 2018 · In this article, we review the recent developments of coherent and nonclassical states for such systems and discuss their applications and usefulness in ...
[119]
Experimental Test of Bell's Inequalities Using Time-Varying Analyzers
The results are in good agreement with quantum mechanical predictions but violate Bell's inequalities by 5 standard deviations.
[120]
The Diffraction Barrier in Optical Microscopy | Nikon's MicroscopyU
The Abbe resolution limit is attractive because it depends only on the maximal relative angle between different wavefronts leaving the specimen and captured by ...
[121]
Telescopes - RP Photonics
Refractive telescopes are based on refractive optical elements, utilizing refraction of light. Figure 2 shows the basic setups of two common types of refractive ...What are Telescopes? · Refractive Telescopes... · Reflective Telescopes...
[122]
Total Internal Reflection In Optical Fiber
Optical fiber uses the optical principle of "total internal reflection" to capture the light transmitted in an optical fiber and confine the light to the core ...
[123]
Low-Loss Optical Fiber - an overview | ScienceDirect Topics
Within three years, the fiber attenuation reached 0.2 dB/km at 1550 nm [5], which is the typical attenuation value of today's standard single-mode fiber ...
[124]
The Basics of LiDAR - Light Detection and Ranging - Remote Sensing
Sep 13, 2024 · LiDAR or Light Detection and Ranging is an active remote sensing system that can be used to measure vegetation height across wide areas.
[125]
The Exposure Triangle - A Beginner's Guide - Photography Life
Jul 18, 2019 · Aperture, shutter speed, and ISO make up the three sides of the exposure triangle. They work together to produce a photo that is properly exposed.
[126]
Holography - RP Photonics
Holograms can be generated by recording interference patterns involving light from an object and a reference beam. They can be used to reproduce 3D images.
[127]
Detailed Balance (DB) Charts - AMOLF
References for record-efficiency cells in the updated figures. Crystalline silicon. Performance parameters (efficiency 27.8%) (updated June 2025):
[128]
Enabling the next era of minimally invasive diagnostics - Excelitas
Our lasers, lamps and LED solutions are used to illuminate every endoscopy application from basic white light surgical visualization to customizable, switchable ...
[129]
Basic principles of medical lasers - UpToDate
Apr 26, 2024 · Lasers are devices that emit a single, coherent wavelength of electromagnetic radiation that is used to cut, coagulate, or ablate tissue for a ...
[130]
Photosynthesis - PMC - PubMed Central - NIH
Oct 26, 2016 · PSII uses light energy to excite a special pair of chlorophylls, known as P680 due to their 680 nm absorption peak in the red part of the ...
[131]
Photosynthesis: basics, history and modelling - PMC - NIH
In this review, we emphasize that mathematical modelling is a highly valuable tool in understanding and making predictions regarding photosynthesis.
[132]
Effects of blue light on the circadian system and eye physiology - PMC
Finally, blue light may also be used to treat seasonal affective disorders [55], and mutations in the melanopsin gene may increase the susceptibility to ...
[133]
Melanopsin, Photosensitive Ganglion Cells, and Seasonal Affective ...
Melanopsin gene variations were associated with seasonal affective disorder (SAD), and in changes in the timing of sleep and activity in healthy individuals.
[134]
Environmental effects of stratospheric ozone depletion, UV radiation ...
Production of vitamin D is the best known benefit of exposing the skin to UV-B ... balance between UV-B-driven production and its reaction with pollutants.
[135]
The Earth-Atmosphere Energy Balance - NOAA
Jun 6, 2023 · The absorption of infrared radiation trying to escape from the Earth back to space is particularly important to the global energy balance.
[136]
Threats to Birds: Collisions (Nighttime Lighting) | U.S. Fish & Wildlife ...
Lighting can attract large numbers of night-migrating birds from as far as 5 kilometers away. Birds drawn into lights often become entrapped and circle the lit ...
[137]
Climate and Earth's Energy Budget - NASA Earth Observatory
Jan 14, 2009 · The differences in reflectivness (albedo) and solar illumination at different latitudes lead to net heating imbalances throughout the Earth ...Missing: caps | Show results with:caps
[138]
Albedo and Climate - UCAR Center for Science Education
But, when warming causes snow and ice to melt, darker colored surfaces are exposed, albedo decreases, less solar energy is reflected out to space, and the ...Missing: patterns caps
[139]
Light Harvesting in Fluctuating Environments: Evolution and ... - NIH
Jun 10, 2021 · In this review, the evolution, structure, and function of different antenna complexes, from single cellular organisms to higher plants, are discussed
[140]
Vision using multiple distinct rod opsins in deep-sea fishes - Science
These animals exhibit various adaptations to maximize their visual sensitivities in a scotopic environment where bioluminescence replaces surface illumination ...