1-Butyl-3-methylimidazolium hexafluorophosphate, commonly abbreviated as [BMIM][PF₆], is a hydrophobic room-temperature ionic liquid consisting of the 1-butyl-3-methylimidazolium cation and the hexafluorophosphate anion, often considered environmentally benign due to low volatility in green chemistry applications, though concerns exist regarding anion hydrolysis.[1] It has the molecular formula C₈H₁₅F₆N₂P and a molecular weight of 284.19 g/mol. This compound is typically a clear, colorless to pale yellow viscous liquid with low volatility and high thermal stability, making it suitable for processes requiring stable, non-flammable media.[2]Key physical properties include a density of approximately 1.37–1.38 g/cm³ at 20 °C, a viscosity of 267–310 cP, and a refractive index of 1.411 at 20 °C.[1][2][3] Its melting point varies slightly with purity but is reported around 10 °C for high-purity samples, with a glass transition at 190.6 K and fusionenthalpy of 19.60 kJ/mol.[4] The ionic liquid shows limited miscibility with water (solubility ~1.6 wt% at 20 °C)[5] but dissolves well in polar organic solvents like dichloromethane and acetonitrile.[2] Thermodynamic studies show heat capacities increasing from the glassy state through liquid phases, with measurements spanning 5–550 K.[4]In applications, [BMIM][PF₆] serves as a reaction medium for catalytic transformations, including ring-closing metathesis, aldehyde oxidations, and lipase-catalyzed acylations, due to its ability to dissolve diverse organic and inorganic compounds.[1] It enhances gas solubilities, such as carbon dioxide (~0.03 mol/mol at 25 °C and 10 bar),[6] supporting extraction and separation processes. Additionally, its electrochemical stability (electrochemical window ~4.0 V) and conductivity make it useful in energy storage systems like batteries and supercapacitors, including as a novel biopolymer electrolyte incorporating ssDNA/ssRNA according to molecular simulations published in 2025.[3][7][8] Safety considerations include mild irritancy to skin and eyes, with handling requiring protective equipment.[1]
Chemical identity and properties
Nomenclature and structure
1-Butyl-3-methylimidazolium hexafluorophosphate is an ionic liquid composed of an imidazolium-based cation and a hexafluorophosphate anion.[9]The systematic IUPAC name for this compound is 1-butyl-3-methyl-1H-imidazol-3-ium hexafluorophosphate.[10] It is commonly abbreviated as [BMIM][PF₆] or BMIM-PF₆ in scientific literature.[9]The molecular formula of 1-butyl-3-methylimidazolium hexafluorophosphate is C₈H₁₅F₆N₂P, with a molecular weight of 284.19 g/mol.[9]The cation, 1-butyl-3-methylimidazolium, features a five-membered heterocyclic imidazolium ring with a butyl chain (-CH₂CH₂CH₂CH₃) attached to the nitrogen at position 1 and a methyl group (-CH₃) at the nitrogen at position 3; the ring includes two nitrogen atoms and three carbon atoms, with the imidazolium core bearing a positive charge delocalized across the ring.[10] The anion is hexafluorophosphate (PF₆⁻), a stable, octahedral complex of phosphorus surrounded by six fluorine atoms.[9]The ionic structure can be textually represented as the ion pair [C₄H₉-Im-CH₃]⁺ [PF₆]⁻, where Im denotes the imidazolium ring.[10]
Physical and chemical properties
1-Butyl-3-methylimidazolium hexafluorophosphate, commonly abbreviated as [BMIM][PF₆], is a viscous, colorless to pale yellow liquid at room temperature.[2] It exhibits a melting point around 10 °C for high-purity samples (values range from -8 °C to 12 °C depending on purity and water content), with a glass transition at 190.6 K and fusion enthalpy of 19.60 kJ/mol, allowing it to remain in the liquid state under typical ambient conditions.[4]The compound has a density of 1.37 g/cm³ at 20 °C and a viscosity ranging from 267 to 310 cP at the same temperature, contributing to its characteristic flow behavior as a room-temperature ionic liquid.[1][2] It demonstrates high thermal stability, with decomposition onset around 310 °C based on thermogravimetric analysis, and possesses an extremely low vapor pressure (negligible, on the order of 10^{-7} Pa at 20 °C), which underscores its non-volatility.[11] The electrochemical window is approximately 4.0 V, enabling its use in electrochemical applications without significant decomposition.[12][BMIM][PF₆] is hydrophobic and immiscible with water, showing limited solubility of about 2-4 wt% in aqueous media depending on temperature.[13] It is miscible with polar organic solvents such as dichloromethane and acetonitrile.[14] Chemically, it remains inert under ambient conditions but undergoes slow hydrolysis in moist environments, producing hydrogen fluoride (HF) from the hexafluorophosphate anion.[15]
Synthesis and preparation
Quaternization of the imidazolium cation
The quaternization of the imidazolium cation in the synthesis of 1-butyl-3-methylimidazolium hexafluorophosphate begins with the alkylation of 1-methylimidazole using an alkyl halide such as 1-bromobutane or 1-chlorobutane as the starting materials.[16] These reagents are typically employed in equimolar amounts to ensure efficient reaction progression.[16]The reaction proceeds under mild heating, commonly at 70–90 °C for 24–48 hours, either in a solvent-free environment or in a polar aprotic medium like acetonitrile, often under an inert nitrogen atmosphere to prevent side reactions.[16][17] The mechanism involves a nucleophilic attack by the unalkylated nitrogen of the imidazole ring on the carbon atom of the alkyl halide, following an SN2 pathway that forms a quaternary ammonium salt through backside displacement of the halideion.[18]The product is 1-butyl-3-methylimidazolium halide (e.g., bromide or chloride), obtained as a viscous liquid or crystalline solid after purification by washing with ethyl acetate and vacuum drying.[16] Yields are typically high, ranging from 80–95%, with the product's purity and structure confirmed via ¹H and ¹³C NMR spectroscopy, showing characteristic shifts for the butyl chain and imidazolium ring protons.[16][17] This intermediate halide salt serves as the key precursor for subsequent anion exchange in ionic liquid preparation.
Anion exchange to form the hexafluorophosphate salt
The anion exchange step completes the synthesis of 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) by metathesizing the 1-butyl-3-methylimidazolium cation, obtained from the prior quaternization of 1-methylimidazole with 1-chlorobutane, with a hexafluorophosphate source.[19]Typically, 1-butyl-3-methylimidazolium chloride is dissolved in distilled water and reacted with an equimolar amount of potassium hexafluorophosphate (KPF₆) or sodium hexafluorophosphate (NaPF₆) at room temperature.[19][14] The mixture is stirred for 2–24 hours, during which the less soluble sodium or potassium chloride byproduct precipitates, forming a biphasic system with the hydrophobic [BMIM][PF₆] in the organic phase.[19] In some procedures, hexafluorophosphoric acid (HPF₆) is used directly, though this requires careful handling due to its corrosiveness.[14]Following the reaction, the organic phase is separated and washed multiple times with water to remove inorganic salts. The product is then dried under reduced pressure (e.g., 0.1 mbar at 30°C) to yield a viscous, light yellow liquid. Further purification may involve dissolution in dichloromethane, treatment with anhydrous magnesium sulfate, filtration, and evaporation of volatiles under vacuum. Lab-scale yields exceed 80%, often reaching 81–91% depending on the exact conditions.[19]This metathesis approach offers high purity for the final ionic liquid while avoiding the need for expensive silver salts or prolonged heating. It enables efficient anion incorporation in aqueous media, facilitating byproduct precipitation and phase separation.[19][14]
1-Butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) serves as an effective polar, non-volatile solvent in various organic reactions and catalytic processes, offering advantages over traditional volatile organic compounds due to its tunable properties and recyclability.[6] In synthetic chemistry, it facilitates enhanced reaction rates and selectivities by stabilizing transition states through ionic interactions and hydrogen bonding.[20]In Diels-Alder cycloadditions, [BMIM][PF6] promotes higher endo/exo selectivity compared to molecular solvents, attributed to preferential hydrogen bonding between the imidazolium cation and the endo transition state of the diene-dienophile pair, such as in the reaction of cyclopentadiene with methyl acrylate.[21] This ionic liquid enables efficient catalysis with rare earth metal triflates, achieving good yields and stereocontrol, and supports recyclability of the solvent-catalyst system for up to six cycles with minimal loss in performance.[22]For hydrogenation reactions, [BMIM][PF6] acts as a stabilizing medium for transition metal catalysts, such as ruthenium nanoparticles derived from RuO₂, enabling the reduction of alkenes like 1-hexene to alkanes with near-complete conversion (>99% yield) under mild conditions (4 atm H₂, 75°C).[23] The high solubility of hydrogen in this ionic liquid enhances catalytic efficiency, with the system reusable for over 17 cycles and total turnover numbers exceeding 110,000.[23]As a green chemistrysolvent, [BMIM][PF6] replaces hazardous volatile organic solvents in numerous transformations, benefiting from its low flammability and high thermal stability (decomposition >300°C), which allow safe operation under microwave irradiation to accelerate reactions like esterifications and couplings.[24] Specific applications include transition metal-catalyzed cross-couplings, such as the [BMIM][PF6]-promoted Suzuki-Miyaura coupling of potassium aryltrifluoroborates with aryl bromides in water using Pd(OAc)₂.[25] Additionally, it supports biocatalytic processes, including enzymatic transesterifications of esters with alcohols using lipases, maintaining enzyme activity in hydrophobic environments.[26]Recovery of [BMIM][PF6] is straightforward via phase separation from organic products or distillation, enabling >98% solvent reuse in subsequent reaction cycles without significant impurity buildup.[27] This recyclability underscores its role in sustainable catalysis, minimizing waste in scalable synthetic protocols.
Extraction and separation processes
1-Butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) has been employed in CO2 capture processes through physical absorption, where it forms complexes with CO2 due to its high solubility for the gas. Experimental measurements indicate a CO2 solubility of approximately 0.96 mol CO2 per mol of IL at 25 °C and 4 MPa, making it suitable for post-combustion capture applications.[28] This solubility arises from favorable interactions between the quadrupolar CO2 molecule and the imidazolium cation, though regeneration requires moderate energy input via pressure or temperature swing.[29]Recent advancements (as of 2024) include the use of [BMIM][PF6] in supported ionic liquid membranes for CO2/CH4 separation, stabilized on ceramic supports with additives like DEA for enhanced selectivity and stability, and in metal-organic framework composites for improved CO2 adsorption capacity.[30][31]In DNA extraction, [BMIM][PF6] enables direct partitioning of double-stranded DNA (dsDNA) from aqueous phases into the hydrophobic ionic liquid phase, leveraging electrostatic interactions between the [BMIM]+ cation and DNA phosphate groups. This method achieves quantitative extraction for trace amounts of DNA (<5 ng/μL), with conformational changes in DNA confirmed by NMR and FT-IR spectroscopy, and allows for subsequent back-extraction into aqueous buffers for recovery.[32] The process is endothermic and selective, unaffected by common interferents like proteins or metal ions, positioning [BMIM][PF6] as a green alternative to traditional organic solvents for genomic applications.[32]For liquid-liquid extractions, [BMIM][PF6] serves as a solvent in countercurrent chromatography systems, facilitating the separation of natural products such as flavonoids from Crataegus pinnatifida and alkaloids from Nelumbo nucifera due to its tunable polarity and high density, which promotes rapid phase settling.[33] Its hydrophobicity enhances selectivity in biphasic systems, improving yields compared to conventional solvents while minimizing emulsion formation.[33] This application leverages the IL's density (1.37 g/cm³) to aid efficient partitioning without chemical modification of analytes.[BMIM][PF6] is utilized for metal ion removal from aqueous solutions, particularly heavy metals like Ni²⁺ from nitric acid media derived from industrial residues, achieving extraction efficiencies exceeding 90% at pH 5.5 when paired with chelating agents such as dithizone.[34] The process exhibits high selectivity over co-existing ions like Zn²⁺ (separation factor >10⁵), with near-complete stripping using nitric acid, enabling recycling of the IL for wastewater treatment.[34] Similar efficiencies (>95%) have been reported for other heavy metals like Cu²⁺ and Pb²⁺ using 2-aminothiophenol as the extractant, highlighting its role in environmental remediation.[35]
Safety, toxicity, and environmental considerations
Health and handling hazards
1-Butyl-3-methylimidazolium hexafluorophosphate is classified as a Category 2 skin irritant, causing redness, dryness, and pain upon direct contact with the skin.[36] It is also a serious eye irritant (Category 2), leading to redness, tearing, and potential corneal damage if not promptly addressed.[36]Inhalation of vapors or mists from this compound may cause respiratory tractirritation, classified as specific target organ toxicity - single exposure (Category 3).[37] Ingestion poses a risk of gastrointestinal upset and systemic toxicity, with animal studies indicating an oral LD50 of 300-500 mg/kg in rats, suggesting moderate acute toxicity.[38] Data on chronic exposure are limited, showing no evidence of carcinogenicity or mutagenicity, though avoidance of prolonged contact is recommended to prevent potential cumulative respiratory or organ effects.[36]Safe handling requires the use of personal protective equipment, including nitrile rubber gloves (thickness >0.11 mm), safety goggles with side shields, and respirators (P1 or equivalent) when aerosols or mists may form.[36] The compound should be stored in a cool (15-25°C), dry, well-ventilated area in tightly closed containers under inert atmosphere to minimize moisture exposure, as hydrolysis can generate corrosive hydrogen fluoride.[39]In case of skin contact, immediately wash the affected area with soap and plenty of water while removing contaminated clothing; seek medical advice if irritation persists.[37] For eye exposure, rinse cautiously with water for at least 15 minutes, lifting upper and lower eyelids, and consult an ophthalmologist.[36] If inhaled, move the person to fresh air and provide oxygen if breathing is difficult; for ingestion, rinse the mouth but do not induce vomiting, and obtain immediate medical attention.[37] Suspected hydrogen fluorideexposure from hydrolysis requires specialized first aid, such as application of 2.5% calcium gluconate gel to affected areas.[39]
Environmental fate and impact
1-Butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) demonstrates high persistence in environmental compartments due to its chemical stability and resistance to biodegradation. In aqueous environments, it exhibits half-lives exceeding 100 days, with indirect photochemical degradation processes yielding overall persistence up to 670 days, primarily driven by reactions with hydroxyl radicals, carbonate radicals, and triplet-state dissolved organic matter. This recalcitrance arises from the robust imidazolium cation structure, which resists microbial breakdown, leading to potential long-term accumulation in soil and water systems.[40]Bioaccumulation potential is limited by a low octanol-water partition coefficient (log Kow ≈ 0.02–0.25), indicating hydrophilic behavior and minimal partitioning into lipid-rich tissues of organisms. However, its partial hydrophobicity facilitates sorption and buildup in sediments, where it may pose risks to benthic communities over time.[41]Aquatic toxicity assessments reveal moderate effects on invertebrates, with a 48-hour LC50 of 19.91 mg/L for Daphnia magna, reflecting disruption to survival and reproduction primarily from the imidazolium cation.[42] Exposure to imidazolium-based ionic liquids inhibits plant growth, reducing root elongation and inducing oxidative stress via reactive oxygen species accumulation at concentrations around 100 mg/L. The hexafluorophosphate (PF6⁻) anion adds concerns through slow hydrolysis in water, releasing fluoride ions that exacerbate toxicity in aquatic systems by inhibiting enzymatic activity and contributing to ecosystemfluoride burdens.[43]Under REACH (EU Regulation), [BMIM][PF6] (CAS 174501-64-5) is registered with no specific PBT/vPvB classification as of 2025, but handling requires prevention of environmental release. Recent studies (as of 2024) highlight ongoing concerns over PFAS-like persistence from the anion, prompting research into safer alternatives.[44]Mitigation strategies include the development of biodegradable ionic liquid alternatives, such as those with ester-functionalized cations that enhance microbial degradation, and wastewater treatment via adsorption onto materials like activated carbon or metal-organic frameworks to remove [BMIM][PF6] before discharge. These approaches aim to reduce release and persistence, though their efficacy depends on site-specific conditions.[45][46]