ATX
ATX (Advanced Technology eXtended) is a widely adopted form factor specification for motherboards and power supply units in desktop personal computers, developed by Intel in 1995 as an evolution of the earlier Baby AT standard.[1] The specification defines standardized dimensions, mounting points, connector interfaces, and layout configurations to ensure compatibility between components like the motherboard, chassis, and power supply, enabling easier assembly, improved airflow, and enhanced expandability.[2] A standard ATX motherboard measures 305 mm by 244 mm (12 inches by 9.6 inches), supporting up to seven expansion slots and integrating an I/O panel directly into the rear of the chassis for ports such as USB, audio, and video.[3][4] Key innovations in the ATX design include rotating the motherboard 90 degrees relative to the Baby AT layout, which positions the CPU and memory closer to the power supply for shorter cable lengths and better cooling efficiency, while mounting the power supply unit along the top or side of the case to direct airflow over hot components.[1] This addressed limitations of prior standards, such as inconsistent I/O placement and restricted expansion, making ATX suitable for high-performance systems with multiple peripherals.[1] The power supply interface features a 24-pin main connector (evolved from the original 20-pin) delivering key voltages like +3.3V, +5V, +12V, and -12V, with auxiliary connectors for CPUs and peripherals to support increasing power demands.[5] Over time, the ATX specification has been revised to accommodate advancing hardware, with variants like microATX (244 mm x 244 mm) for compact builds and extended ATX (E-ATX, up to 330 mm x 305 mm) for workstations requiring more slots and ports.[6] The current version, ATX 3.1 released in 2023, supports high-power components such as PCIe 5.0 graphics cards and next-generation CPUs, including 16-pin 12V-2×6 connectors capable of delivering up to 600W for GPUs and enhanced multi-rail designs for efficiency and stability.[7] Despite the rise of smaller form factors like Mini-ITX for space-constrained applications, ATX remains the dominant standard for consumer and enthusiast desktop PCs due to its balance of size, performance, and compatibility.[1]Overview and History
Overview
The ATX (Advanced Technology eXtended) form factor is a specification for motherboards and power supplies developed by Intel in 1995 to standardize desktop personal computer designs.[8] It establishes a consistent framework for component integration, enhancing compatibility across manufacturers and simplifying system builds.[9] Core elements of the ATX specification include a 12-inch by 9.6-inch motherboard layout, an integrated I/O panel on the rear edge for ports and connectors, and a standardized PSU mounting position that aligns with the chassis top.[8] These features promote efficient space utilization within PC cases.[4] Compared to the preceding AT form factor, ATX provides primary advantages such as improved airflow through repositioned heat-generating components away from expansion slots, easier assembly via the fixed I/O shield, and superior cable management by orienting the PSU to exhaust hot air directly outward.[10] This design shift addressed limitations in cooling and accessibility that plagued earlier standards.[11] Introduced in July 1995, the ATX form factor has undergone iterative revisions in its power supply standards to support evolving hardware demands, including high-power GPUs and multi-core processors.[12]Development History
The ATX (Advanced Technology eXtended) form factor originated from Intel's efforts to standardize PC hardware amid the escalating complexity of mid-1990s computing systems. The initial ATX 1.0 was released in July 1995, with version 1.1 following in February 1996 to incorporate early feedback, designed to supersede the aging AT (full-length) and LPX form factors, which struggled with expanding component sizes, cable management, and thermal challenges in tower-style cases. This shift was driven by the need for improved airflow to address heat dissipation issues from increasingly powerful processors and peripherals, as well as higher power delivery requirements that previous designs could not efficiently support.[13][9] Subsequent revisions marked key evolutionary milestones, each responding to surging demands from CPU and GPU advancements. The ATX12V specification emerged in 2000 to accommodate the Pentium 4 processor's elevated power needs, introducing dedicated 12V rails for better stability under load. In 2004, ATX version 2.2 updated specifications for power connectors and I/O shielding to better support evolving hardware interfaces. ATX12V 2.0, released in 2003, extended the main power connector to 24 pins and added provisions for PCI Express graphics, while ATX12V 2.2 in 2005 provided further updates. Further iterations included ATX12V 2.4 in April 2013, which optimized efficiency guidelines for multi-core processors, and the major ATX 3.0 PSU specification in February 2022, engineered to handle transient power spikes from high-end GPUs. In September 2023, ATX 3.1 updated the standard for full PCIe 5.0 compatibility, incorporating a revised 12V-2x6 connector to support up to 600W delivery with improved safety margins.[14][15][16] These developments were motivated by ongoing challenges in power efficiency and thermal management, as CPUs and GPUs evolved from tens to hundreds of watts, necessitating robust, scalable designs that minimized energy waste and ensured reliability across vendors. Intel's open specifications facilitated widespread industry collaboration, prioritizing backward compatibility to ease transitions.[17][18] ATX rapidly achieved dominance in the consumer PC market by the late 1990s, powering the majority of desktop builds due to its balance of expandability, cost-effectiveness, and support for standard components. This adoption persisted, with ATX maintaining over 40% market share in motherboard form factors as of 2024, even as compact alternatives like Mini-ITX gained traction for small-form-factor systems.[19][20]Motherboard Specifications
Dimensions and Layout
The ATX motherboard form factor defines a standard physical size of 12 inches (305 mm) wide by 9.6 inches (244 mm) deep, providing sufficient space for components while ensuring compatibility with mid-tower and full-tower PC cases.[21] This rectangular layout orients the board with the I/O panel and expansion slots along the rear long edge (12 inches / 305 mm wide), a 90-degree rotation from the earlier Baby AT design to improve airflow and cable management.[21] Mounting holes are positioned at precise coordinates to secure the motherboard within the chassis using standoffs and screws, with nine required holes.[21] Key positions include holes located 0.25 inches (6.35 mm) from the rear edge for I/O bracket alignment and additional holes at intervals such as 6.25 inches (158.75 mm) from the edges along the board's perimeter, ensuring universal fit across compliant cases without obstructing internal components.[18] The layout divides the board into functional zones for optimal component placement and cooling. The CPU socket is recommended to be situated near the center-right, behind the rear I/O panel and to the right of the seventh expansion slot, facilitating direct airflow from the power supply fan.[21] Expansion slots align along the rear long edge, supporting up to seven full-length PCI or PCIe cards at 0.8-inch (20.32 mm) spacing, while the rear I/O integrates a standardized bracket for ports like USB, audio, and video outputs, positioned flush with the chassis edge for easy access.[21][3] As an extension of the ATX standard, the E-ATX form factor increases the depth to 13 inches (330 mm) while maintaining the 12-inch (305 mm) width, allowing for additional expansion slots or larger heatsinks in high-end systems.[22] This variation, often aligned with the SSI EEB specification, uses compatible mounting holes but requires cases designed for the extended dimensions to avoid interference.[3]Connector Positions
The ATX motherboard incorporates a standardized rear I/O panel, an integrated metal bracket that mounts to the rear of the system case and defines positions for external ports including USB, audio, video outputs, and Ethernet. This panel is located along the motherboard's rear edge, aligned with a fixed case cutout measuring 6.25 inches (158.75 mm) wide by 1.75 inches (44.45 mm) tall, ensuring universal compatibility across ATX-compliant chassis. The bracket's design allows flexible arrangement of ports within a designated zone, typically spanning the full width to accommodate up to 12 USB ports, multiple audio jacks, and display connectors like VGA, DVI, or HDMI, while video and network ports are often clustered in the upper section for ergonomic access.[21][23] Expansion slots on the ATX form factor are arranged in a vertical stack along the rear edge, immediately adjacent to the I/O panel, supporting up to seven full-length slots for add-in cards. These slots maintain a consistent 0.8-inch (20.32 mm) center-to-center spacing to enable full-height card installation without overlap, with the top slot positioned approximately 0.15 inches (3.81 mm) below the I/O keepout boundary for clearance. In contemporary ATX boards, this layout commonly features five PCIe slots—often including one x16 for graphics cards at the top—alongside two positions compatible with legacy PCI or other interfaces, promoting modular expansion while adhering to the original specification's orientation for optimal airflow parallel to the slots.[21][3] Internal headers for front-panel connectivity, such as USB, audio, and fan connectors, are positioned relative to the board's edges to simplify assembly and cable management. The specification recommends placing these headers along the front edge, to the right of the expansion slots, typically 1-2 inches (25-50 mm) from the bottom edge when oriented in a standard case, allowing direct routing to case I/O without crossing major components. USB headers are often grouped in the lower-right area, audio headers nearby for front-panel jacks, and fan headers distributed along the top and right edges near heat-generating elements like the CPU socket, ensuring accessible orientation for 4-pin PWM fans and 9-pin USB 2.0 extensions.[21][24] ATX port spacing standards emphasize minimum distances to avoid mechanical interference and ensure reliable connections. This 0.8-inch (20.32 mm) spacing applies to expansion slots, standardizing bracket cutouts in cases for seamless card alignment. These guidelines, rooted in the form factor's design for modularity, also influence internal header placements.[21]Power Supply Design
Physical Characteristics
The ATX power supply unit (PSU) adheres to a standardized form factor designed for seamless integration into desktop computer chassis. Its dimensions are fixed at 150 mm in width, 86 mm in height, and 140 mm in depth, providing a compact yet robust housing that fits within most mid-tower cases.[5] Higher-wattage models may extend to 160 mm in depth to accommodate additional components, while maintaining the core width and height for compatibility.[25] Mounting is facilitated by four screw holes positioned with 25 mm spacing from the edges, aligning precisely with standard ATX chassis brackets to ensure secure installation in mid-tower configurations.[5] The PSU can be oriented horizontally at the bottom or top of the case, or vertically in some modular designs, with the 120 mm cooling fan typically facing the intake direction—often downward in bottom-mounted setups—to draw in ambient air and exhaust heat rearward through the chassis.[26] This orientation optimizes airflow, supporting efficient cooling without requiring case modifications.[27] Construction emphasizes durability, featuring a steel enclosure that shields internal electronics from electromagnetic interference and physical damage.[28] A 120 mm axial fan is standard for thermal management, promoting quiet operation under load.[5] Overall weight ranges from 1 to 2 kg, varying with wattage and component density, which contributes to straightforward handling during assembly.[29]Innovations from Prior Designs
The ATX form factor, introduced by Intel in 1995, represented a significant evolution from the preceding Baby-AT and LPX designs by addressing key limitations in system assembly, thermal management, and expandability. Unlike the Baby-AT, which relied on fragmented cabling and awkward component placement, ATX standardized motherboard and power supply integration to enhance overall usability and future-proofing. This shift combined the high integration of LPX with the expandability of Baby-AT, reducing manufacturing costs and improving support for emerging technologies like accelerated graphics ports and larger memory modules.[21] A primary innovation was the integration of power control via the PS_ON signal on the motherboard, enabling "soft power" functionality that allowed remote activation and shutdown without a traditional hard switch on the power supply unit (PSU). In the AT form factor, power was toggled via a mechanical switch directly on the PSU, which limited advanced power management features and required physical access for operation; ATX's PS_ON pin, an active-low TTL-compatible signal, permits the motherboard to control the PSU in coordination with operating system commands, supporting suspend-to-RAM states and graceful shutdowns. This design facilitated better energy efficiency and user convenience in desktop systems.[30] ATX streamlined motherboard powering with a single 20-pin connector (expanded to 24-pin in later revisions), which consolidated the multiple discrete cables—typically two 6-pin connectors and P8/P9 blocks—used in AT designs, thereby minimizing cable clutter, installation errors, and signal interference. This unified connector delivered all essential voltage rails (+3.3V, +5V, +12V, -5V, -12V, and ground) in a keyed, foolproof layout, allowing for easier assembly and higher current capacity without the voltage drops common in older multi-cable setups. By standardizing this interface, ATX reduced system integration time and supported denser component layouts on the motherboard.[21] Thermal performance was optimized through repositioned components and PSU orientation, with the fan exhausting hot air directly out the rear of the case while drawing cool intake from the front, creating a directed airflow path that avoided the hot air recirculation issues in LPX systems—where the side-mounted PSU often pulled warm air from within the chassis—and the cramped CPU placement in Baby-AT that hindered cooling. This layout positioned the CPU socket away from expansion slots and closer to rear exhaust, accommodating larger heatsinks and improving heat dissipation for high-performance processors without relying on inefficient riser-based cooling.[31]Power Supply Revisions
Original ATX and Early Revisions
The original ATX power supply specification, introduced by Intel in July 1995, marked a significant standardization for desktop PCs by integrating power delivery with the new ATX motherboard form factor. It utilized a single 20-pin main connector to supply multiple DC voltage rails, including the innovative addition of a +3.3V rail to support emerging PCI expansion cards and low-voltage logic components, alongside established +5V, +12V, -12V, and +5V standby rails. This design consolidated previous disparate connectors from the AT form factor, simplifying cabling while enabling better airflow through a side-mounted 80 mm fan. Typical units provided 200-300 W of total output capacity, sufficient for mid-1990s hardware like Pentium processors and basic peripherals.[8] Early revisions, such as ATX Specification Version 1.1 in 1996, refined the original design based on OEM feedback without major architectural changes, maintaining the 20-pin connector and voltage rail structure while emphasizing soft power control for OS-managed shutdowns. The voltage rails were rated for +3.3 V at 28 A, +5 V at 30 A, +12 V at 17 A, -12 V at 0.8 A, and +5 Vsb at 2 A, providing balanced distribution for motherboard logic (+3.3 V and +5 V), drives (+5 V and +12 V), and legacy serial ports (-12 V). These ratings prioritized the +5 V rail for primary power needs, reflecting the era's reliance on 5 V-tolerant components.[8][32] The ATX12V 1.0 specification, released by Intel in February 2000, represented an early evolution to address rising CPU power demands from the Pentium 4 processor, which required more robust +12 V delivery. It expanded the main connector to 24 pins for backward compatibility and added a dedicated 4-pin auxiliary CPU connector to supply up to 60 W of +12 V directly to the processor's voltage regulator, reducing strain on the main rails. Maximum continuous power rose to 350 W, with the same core voltage rail ratings as prior versions to maintain compatibility. A key feature was the introduction of active power factor correction (PFC) as a recommendation for units over 200 W, enhancing AC-to-DC conversion efficiency above 90% and reducing harmonic distortion to meet IEC 61000-3-2 standards.[33][34] These foundational designs laid the groundwork for later enhancements in power capacity to support more demanding multi-core systems.ATX12V 1.x and 2.x
The ATX12V 1.x specifications, introduced between 2000 and 2004, addressed the growing power demands of early 2000s processors and storage devices by incorporating dedicated connectors for enhanced +12V delivery. These revisions also introduced SATA power connectors (Molex 88751 series) to accommodate emerging Serial ATA drives, replacing older 4-pin Molex peripherals for better efficiency and compatibility. Power capacities typically reached up to 500W in practical implementations, with configurations like the 300W reference design specifying +12V at a maximum of 18A, +5V at 26A, and +3.3V at 27A across single-rail designs.[33] Voltage regulation in ATX12V 1.x maintained ±5% tolerances for major rails (+12V, +5V, +3.3V), with peak allowances up to ±10% under heavy +12V loading to handle transient CPU demands. Ripple and noise were limited to 120mV peak-to-peak on the +12V rail and 50mV on +5V and +3.3V, ensuring stable operation for sensitive components. Hold-up time was standardized at a minimum of 17ms at full load under 115VAC/57Hz or 230VAC/47Hz input conditions, providing brief backup during AC interruptions. These features, detailed in Intel's ATX12V Power Supply Design Guide Version 1.3 (April 2003), marked a shift toward modular power distribution for desktop systems transitioning from ATX 1.x basics.[33] Building on 1.x foundations, the ATX12V 2.x series (2005–2013) evolved to support the power-hungry GPUs and multi-core CPUs of the mid-2000s, introducing multi-rail +12V architectures (with single-rail +12V adopted in version 2.4 in 2009 for simplified distribution), and expanded connector options. Version 2.2 (March 2005) replaced the 2x10 main power connector with a 2x12 (20+4 pin) for 24-pin motherboard compatibility and added support for 75W PCI Express slots, while later iterations like 2.3 incorporated the 6+2-pin PCIe connector for up to 150W per 8-pin configuration on graphics cards. An 8-pin ATX12V CPU connector (compatible with EPS12V) was introduced to provide up to 235W for high-end desktop CPUs. Power supplies scaled to 600–1000W capacities, with multi-rail designs distributing +12V loads across separate rails (e.g., +12V1 for peripherals and +12V2 for CPUs/GPUs) to improve safety and stability, allowing combined +12V currents up to 72A in high-end 1000W units.[17] ATX12V 2.x refined voltage parameters with +12V regulation at ±5% (peak ±10%), enabling peak CPU currents up to 19A on the +12V2 rail for 450W+ systems, while ripple suppression targeted under 120mV on +12V (with many designs achieving <50mV through improved filtering). Hold-up time remained at 17ms minimum, and efficiency benchmarks aligned with the emerging 80 PLUS Bronze standard (82% at 20% load, 85% at 50% load, 82% at 100% load), promoting energy savings in high-wattage builds. These advancements, as outlined in Intel's ATX12V Power Supply Design Guide Version 2.2 and subsequent revisions, facilitated the rise of gaming and enthusiast PCs without the extreme transients later addressed in ATX 3.x.[17]ATX 3.x Including 3.1
The ATX 3.x specification, introduced by Intel in 2022, represents a significant evolution in power supply unit (PSU) design to accommodate the escalating power demands of modern consumer desktop platforms, particularly those featuring PCIe 5.0 graphics cards. ATX 3.0 mandates a single-rail +12V output supporting high capacities up to 2000W total PSU power, with the 16-pin connector limited to 600W for PCIe 5.0 add-in cards. This revision also introduces support for power excursions, allowing the +12V rail to handle transient loads up to twice the rated capacity—or 235% of nominal load—for durations as short as 100 microseconds, ensuring stability during sudden spikes from high-performance GPUs.[35][36] A key innovation in ATX 3.0 is the 12VHPWR 16-pin connector, developed in collaboration with PCI-SIG to support PCIe 5.0 add-in cards by providing up to 600W through a single cable, reducing cable clutter and improving airflow in systems. Many PSUs compliant with this standard achieve 80 PLUS Gold efficiency or higher (at least 87% at 100% load, 90% at 50% load, and 87% at 20% load under 115V input). Enhanced safety features include improved overcurrent protection on the +12V rail and better fault tolerance for excursions, making it particularly suitable for NVIDIA's RTX 40-series GPUs, which exhibit high transient power draws. The hold-up time is specified at 17ms at full load to maintain output during brief AC interruptions.[37][35][38] ATX 3.1, released in 2023 and the latest revision as of November 2025, builds directly on 3.0 with refinements to address early implementation challenges, primarily focusing on connector reliability and operational efficiency. It replaces the 12VHPWR with the 12V-2x6 connector, a revised 16-pin design featuring shorter sense pins and improved mechanical latching to prevent melting issues observed in some 12VHPWR deployments due to improper seating. This new connector retains 600W capacity but incorporates "Alt Mode" for the sense pins, enabling detection of connection status and power negotiation between the PSU and GPU, enhancing compatibility with upcoming RTX 50-series GPUs. The hold-up time is reduced to 12ms at full load (with 17ms recommended at 80% load), allowing for more compact capacitor designs without compromising reliability. All other core features, including power excursion tolerance, single-rail +12V, and support for 80 PLUS Gold/Platinum efficiency, remain consistent, ensuring backward compatibility while enhancing safety through stricter overcurrent and short-circuit protections.[35][36][38]Power Supply Derivatives
Compact and Low-Profile Variants
Compact and low-profile variants of the ATX power supply standard address space constraints in smaller PC builds, such as Mini-ITX and slim desktop systems, by reducing overall dimensions while maintaining compatibility with core ATX electrical requirements.[25] The SFX (Small Form Factor) specification defines a compact PSU measuring 125 mm wide, 63.5 mm high, and 100 mm deep, making it suitable for Mini-ITX cases where volume is limited.[25] These units enabling efficient cooling and component integration in small enclosures without compromising performance for mid-range systems.[28] TFX (Thin Form Factor) PSUs further prioritize low height for slimline desktops, with standard dimensions of 85 mm wide, 65 mm high, and 175 mm deep.[28] Designed for space-constrained office or media PCs, TFX units typically deliver 200-400 W, focusing on reliability for low-to-moderate loads rather than high-performance gaming.[39] Introduced by Intel in July 2019, the ATX12VO specification represents a derivative emphasizing efficiency through a single +12 V rail output, eliminating dedicated 3.3 V and 5 V rails to reduce complexity and enable smaller designs via onboard DC-DC conversion.[40] This approach improving low-load efficiency in compact builds while adhering to ATX compatibility.[41] As of 2025, adoption of ATX12VO has been gradual, primarily in pre-built and industrial systems.[42] These variants often use adapters to fit standard ATX cases, but their reduced depth and volume inherently limit high-wattage models, prioritizing thermal management and airflow in tight spaces over maximum power capacity.[25]High-End and Server Derivatives
The WTX power supply specification, introduced in 1999 by Intel for high-end workstations, features dimensions of 9.1 × 5.4 × 3.4 inches for the single-fan configuration and supports output powers ranging from 350 W to 850 W.[43] WTX designs accommodate dual power supplies to enable redundancy in mission-critical environments, ensuring continuous operation during maintenance or failure scenarios.[43] The EPS12V standard, established by the Server System Infrastructure (SSI) forum starting in the early 2000s, targets entry-level servers with a 24-pin main connector and an 8-pin auxiliary connector to provide robust power distribution for multi-processor systems.[44] It supports capacities up to 1200 W in extended implementations and includes provisions for redundant configurations, such as N+1 setups, to enhance system reliability in data center applications.[45] AMD's Group Energy Specification (GES), released in 2005 for Opteron processor platforms, mirrors EPS12V but is optimized for AMD's dual-socket server architectures, employing a 24-pin main connector alongside 8-pin and optional 4-pin auxiliary connectors for precise voltage regulation.[46] This design ensures compatibility with high-performance Opteron-based motherboards requiring enhanced auxiliary power beyond standard ATX supplies.[46] Common features across these derivatives include hot-swappable modules for uninterrupted service, elevated +12 V rail capacities reaching up to 100 A to accommodate dense component loads, and adaptations for blade server chassis emphasizing efficiency and modular scalability.[47]Connectors and Interfaces
Main Power Connectors
The primary interface for delivering power to the ATX motherboard is the 24-pin connector, standardized in the ATX12V specification version 2.0 and later. This connector supplies essential DC voltages including +3.3 V, +5 V, +12 V, -12 V (for legacy compatibility), +5 V standby (5 VSB), multiple ground (COM) lines, and control signals such as PS_ON# (power supply on) and PWR_OK (power good). It features a 20+4 pin modular design, where the additional four pins (two +12 V, two COM) can be detached to ensure backward compatibility with older 20-pin receptacles on motherboards produced before 2004. The pinout is arranged in a 12x2 configuration with a 4.2 mm pitch, using Molex Mini-Fit Jr. or equivalent housing, and includes sense wires (e.g., +3.3V sense) to monitor voltage levels at the motherboard for improved regulation.[48][49][50] Key pin assignments in the 24-pin connector, viewed from the mating side of the plug (wire side facing away), emphasize power distribution and signaling:| Pin | Signal | Wire Color (Suggested) | Description |
|---|---|---|---|
| 1 | +3.3 V | Orange | +3.3 V power |
| 8 | PWR_OK | Gray | Power good signal (goes high after voltages stabilize) |
| 9 | +5 VSB | Purple | +5 V standby power (always on when AC is present) |
| 11 | +3.3 V sense | Orange (thinner) | +3.3 V remote sense for voltage monitoring |
| 13 | +3.3 V | Orange | +3.3 V power |
| 14 | -12 V | Blue | -12 V power (legacy) |
| 16 | PS_ON# | Green | Power supply on (low to activate PSU) |
| 17 | +5 V | Red | +5 V power |
| 20 | +5 V | Red | +5 V power |
| 21 | +5 V | Red | +5 V power |
| 23 | +12 V | Yellow | +12 V power |
| 24 | +12 V | Yellow | +12 V power |