Fact-checked by Grok 2 weeks ago

Allen Telescope Array

The Allen Telescope Array (ATA) is a radio interferometer array located at the Hat Creek Radio Observatory in the Cascade Mountains of northern California, designed from the ground up as the first telescope dedicated to the search for extraterrestrial intelligence (SETI) while also supporting general radio astronomy observations.^[1]^[2] Comprising 42 individual 6.1-meter-diameter offset Gregorian antennas, the ATA provides a collecting area of approximately 1,200 square meters and operates across a continuous frequency range of 0.9 to 14 GHz, enabling wide-field, panchromatic snapshot imaging and simultaneous SETI scans with tunable bandwidths up to 2.4 GHz.^[2]^[3] Funded primarily by Microsoft co-founder Paul G. Allen through grants totaling over $30 million from his family foundation starting in 2001, the project was a collaboration between the SETI Institute and the University of California, Berkeley's Radio Astronomy Laboratory, with construction beginning in 2004 and the initial 42 elements becoming operational in October 2007. The array faced a funding shortfall in 2011 leading to temporary hibernation, but was revived with private support.^[1]^[4]^[5] Originally envisioned as a 350-antenna array to achieve a full hectare of collecting area for high-sensitivity sky surveys, the ATA's current configuration excels in commensal observing—allowing SETI signal searches to run alongside astronomical projects without interference—thanks to its innovative use of commercial off-the-shelf components for cost-effective digital signal processing and beamforming.^[2] Notable features include a wide field of view (up to 2.45 degrees at the 21 cm hydrogen line), low-noise cooled receivers upgraded around 2020 to enhance sensitivity across L-, S-, C-, and X-bands, and advanced radio frequency interference (RFI) mitigation systems critical for detecting faint technosignatures amid terrestrial noise.^[1]^[6]^[7] Since 2012, management has transitioned to SRI International, with ongoing support from the SETI Institute enabling contributions to discoveries like fast radio bursts and black hole studies, alongside renewed SETI efforts incorporating artificial intelligence for signal classification as of November 2025.^[4]^[8]^[9]

Facility Overview

Location and Design

The Allen Telescope Array (ATA) is situated at the Hat Creek Radio Observatory in northern California, approximately 300 miles northeast of San Francisco and just north of Lassen Peak in the Cascade Mountains. This remote location was selected primarily for its exceptionally low levels of radio frequency interference (RFI), which is critical for sensitive radio astronomy observations, as well as its existing infrastructure and minimal light pollution contributing to dark skies. The site's isolation from urban areas and telecommunications infrastructure helps maintain a quiet radio environment, enabling effective detection of faint cosmic signals. The array operates in an ATA-42 configuration with 42 individual antennas, each featuring a 6.1-meter diameter hydroformed aluminum primary reflector designed in an offset Gregorian optical configuration. This design incorporates a 2.4-meter secondary reflector to minimize blockage and spillover, achieving a wide field of view of up to 2.45 degrees at the 21 cm hydrogen line wavelength (1.42 GHz), which supports efficient sky surveys. The antennas are equipped with wideband feeds and receivers providing continuous frequency coverage from 0.5 to 11.2 GHz, allowing simultaneous observations across a broad spectrum relevant to both astronomical and extraterrestrial signal searches. The ATA embodies the "Large-Number Small-Diameter" (LNSD) paradigm, utilizing numerous modest-sized dishes to achieve cost-effective scalability and high collecting area through interferometry, rather than relying on fewer large single-dish telescopes. In its current setup, the antennas are arranged to provide a maximum baseline of 300 meters, enabling angular resolutions sufficient for high-resolution imaging in radio astronomy. Although expansions to approximately 350 antennas with baselines extending to 900 meters were planned to further enhance sensitivity and resolution, these have not yet been realized, leaving the array at its 42-antenna scale.

Funding and Development

The Allen Telescope Array (ATA) was primarily funded by philanthropist Paul Allen through the Paul G. Allen Family Foundation, which provided initial grants totaling $25 million starting in 2000 to support the project's early phases.^[10] Overall, Allen's contributions exceeded $30 million since the funding began around 2003, enabling the telescope's construction and operations.^[11] Additional support came from the SETI Institute and the University of California, Berkeley, which collaborated as lead partners in design, engineering, and operations.^[4] The project originated in the late 1990s as the One Hectare Telescope (1hT), conceived through a series of meetings organized by the SETI Institute between 1997 and 1999 to create a large-area array for radio astronomy and extraterrestrial intelligence searches.^[12] By 2001, the concept had evolved into a phased development plan, with construction beginning after securing major funding in 2003–2004.^[13] The array achieved initial operations in October 2007 with its first 42 antennas (ATA-42), marking the completion of Phase 1 at the Hat Creek Radio Observatory.^[14] Expansion plans aimed for up to 350 antennas by the early 2010s, though the array stabilized at 42 elements following the initial build-out.^[15] Key engineering milestones included the integration of custom digital correlators and beamformers for real-time signal processing, which allowed the ATA to form multiple independent beams across wide frequency bands.^[16] These systems were developed in collaboration with UC Berkeley's Center for Astronomy Signal Processing and Electronics Research (CASPER), leveraging open-source FPGA-based hardware to enable efficient, scalable data handling for both imaging and pulsar observations.^[17] The initial design emphasized simultaneous use for SETI technosignature detection and general radio astronomy, providing a wide field of view and continuous coverage from 0.5 to 11 GHz—features that distinguished it from traditional single-dish telescopes by supporting commensal, multi-purpose observations without reconfiguration.^[18]

Historical Development

Conception and Construction

The Allen Telescope Array (ATA) originated as a collaborative effort between the SETI Institute and the University of California, Berkeley's Radio Astronomy Laboratory, conceived in 1999 to create a dedicated radio telescope for the search for extraterrestrial intelligence (SETI). This project evolved from pioneering radio SETI initiatives, including Frank Drake's Project Ozma in 1960, which used a single large dish to scan for narrowband signals from nearby stars, establishing the foundational methodology for modern SETI observations. The ATA, initially known as the One Hectare Telescope, aimed to leverage advancements in digital signal processing and affordable antenna technology to enable simultaneous wide-field surveys far beyond the capabilities of earlier single-dish efforts.^[19]^[20] Construction commenced at the Hat Creek Radio Observatory in northern California in 2004, following delivery of the first three prototype 6.1-meter offset-Gregorian antennas in June 2002, which were tested for performance in detecting spectral signatures like atomic deuterium. The site's remote location, approximately 290 miles northeast of San Francisco, was selected for its low radio frequency interference (RFI) environment, necessitating environmental assessments to ensure minimal ecological impact during site preparation and array expansion. Phased deployment began with initial testing of a prototype array in 2000, including a seven-antenna prototype installed that year, leading to the full 42-antenna array (ATA-42) achieving first light and becoming operational in October 2007, validating beamforming capabilities across multiple antennas.^[20]^[1]^[21] The array reached its current ATA-42 configuration in 2007, with full integration and calibration completed under UC Berkeley's management, which handled technical development, operations, and RFI mitigation strategies essential for the array's broadband sensitivity from 0.5 to 11 GHz. Early challenges included logistical hurdles in deploying the modular antennas over a compact 1-hectare area, requiring innovative off-the-shelf components adapted for cryogenic cooling to reduce thermal noise, while RFI mitigation techniques like real-time digital filtering were prototyped to combat terrestrial interference. The project was designed for scalability to ATA-350, enhancing sensitivity by an order of magnitude through increased collecting area, though UC Berkeley's direct involvement in management concluded in 2012. Funding for initial phases came primarily from the Paul G. Allen Family Foundation.^[20]^[4]^[21]

Operational Challenges and Transitions

In 2011, the Allen Telescope Array (ATA) faced severe operational disruptions due to funding shortfalls stemming from state budget cuts at the University of California, Berkeley, which managed the Hat Creek Radio Observatory where the ATA is located. These cuts, combined with reduced federal support, led to the layoff of most staff and the placement of the array into hibernation mode in April, effectively halting scientific observations, expansion plans, and full operations while a skeleton crew maintained basic upkeep to prevent deterioration.^[4]^[22]^[23] By early 2012, UC Berkeley formally withdrew from managing the facility amid ongoing financial pressures, prompting a transition to the SETI Institute for primary operations, with SRI International assuming technical management and facility oversight on behalf of the U.S. Air Force. This shift allowed the SETI Institute, a nonprofit organization, to prioritize SETI research while integrating the ATA into broader applications, such as space situational awareness for the Air Force, to diversify funding streams. The revival in December 2011, preceding the full transition, was enabled by private donations and a National Science Foundation grant, enabling limited operations and the rehiring of key personnel.^[4]^[24]^[25] Recovery efforts emphasized resuming SETI observations alongside temporary repurposing for general radio astronomy projects, such as mapping hydrogen distribution, to demonstrate the array's versatility and attract sustained support. A notable contribution came from supporters like Microsoft co-founder Paul Allen, whose earlier philanthropy had seeded the project, though specific revival funding included broader private gifts totaling around $200,000 initially, with longer-term commitments like a $3.5 million donation from Qualcomm's Franklin Antonio in late 2012 to enhance capabilities. This institutional pivot to a nonprofit model under the SETI Institute underscored a dual-use strategy—balancing SETI with opportunistic astronomical research—to mitigate future funding vulnerabilities and ensure operational continuity.^[25]^[26]^[27]

Current Status and Upgrades

The Allen Telescope Array (ATA), comprising 42 six-meter antennas located at the Hat Creek Radio Observatory in northern California, has been operational since October 2007, with a hiatus from April to December 2011 due to funding shortfalls, and is managed by the SETI Institute.^[1] The array supports both SETI searches for extraterrestrial intelligence and broader radio astronomy research, with the majority of annual observing time dedicated to SETI efforts alongside allocations for other scientific projects.^[1] Operations are supported through collaborations, including funding from the Franklin Antonio Bequest for ongoing maintenance and enhancements.^[28] Key upgrades implemented between 2013 and 2016 included the installation of new cryogenic feeds on the antennas, which significantly improved system sensitivity by reducing noise temperatures across the 1–15 GHz frequency range.^[29] These low-noise, broadband feeds, developed specifically for the ATA, enhanced performance for widefield observations by factors of up to several times compared to prior room-temperature systems, enabling more efficient detection of faint signals.^[29] Complementary improvements to the digital backend have bolstered radio frequency interference (RFI) rejection, allowing for higher-quality data in increasingly crowded spectral environments.^[9] In recent years, the ATA has undergone refurbishments to support fast radio burst (FRB) follow-up observations, as part of a broader upgrade program funded to sustain its role in transient astronomy.^[28] For instance, in observations spanning 2022–2023 and analyzed in 2024, the array detected 35 bursts from the repeating FRB 20220912A over 541 hours of integration time, demonstrating its enhanced capabilities for real-time monitoring of such events.^[30] Additionally, in 2024, the ATA conducted a dedicated 28-hour technosignature search of the TRAPPIST-1 system across 0.9–9.3 GHz, marking the longest single-target radio SETI observation of this nearby exoplanet host to date, though no artificial signals were identified.^[31] In October 2025, the ATA provided key radio data for the discovery of the first radio-bright off-nuclear tidal disruption event, AT 2024tvd, revealing a hidden supermassive black hole in a dwarf galaxy tearing apart a star.^[32] Planned infrastructure enhancements, including potential expansions to the antenna array, are under exploration to further increase data throughput and observational versatility.^[33] Ongoing maintenance at the Hat Creek site involves regular antenna recalibration to ensure precise beamforming and alignment, essential for the array's interferometric operations.^[34] The facility has shown resilience to environmental challenges, including wildfires and power disruptions common in the region, through robust site infrastructure and backup systems that minimize downtime.^[34] These efforts, combined with recent integrations like AI-driven signal processing pipelines achieving up to 600 times faster analysis, position the ATA for continued contributions to multi-wavelength astronomy into 2025 and beyond.^[9]

Scientific Objectives

Primary Research Goals

The Allen Telescope Array (ATA) supports primary research goals in radio astronomy through large-scale surveys focused on mapping neutral hydrogen (HI) in nearby galaxies, enabling studies of gas distribution, dynamics, and intergalactic medium interactions. These efforts target extensions of HI disks beyond optical boundaries and diffuse intergalactic HI in galaxy groups, providing insights into environmental effects on gas evolution. For instance, observations have mapped HI emission in Local Group galaxies like M31 and M33, revealing extended structures that trace spiral arms and tidal interactions.^[16]^[35] A key component involves pulsar timing observations to detect nanohertz gravitational waves from supermassive black hole binaries, utilizing the ATA's wide instantaneous bandwidth for high-precision pulse arrival time measurements. The array contributes millisecond pulsar data to the International Pulsar Timing Array (IPTA), enhancing the global network's sensitivity to correlated timing residuals indicative of a stochastic gravitational wave background. This work builds on the ATA's ability to monitor multiple pulsars simultaneously, supporting long-term datasets essential for signal characterization.^[36]^[37] Commensal surveys conducted alongside primary observations target transient radio sources, including potential emissions from supernova remnants and variable phenomena in the galactic plane. The ATA Survey of Galactic Radio Transients (ASGARD), for example, operates at 3 GHz to identify slow transients across wide fields, capturing rare events like flare stars or magnetars while imaging extended structures such as supernova remnants at multiple frequencies. These surveys leverage the array's multi-beam capability to maximize discovery potential without dedicated time allocation.^[38]^[39] The ATA's scalability is a core design feature, with system-equivalent flux density and noise levels improving as σ ∝ 1/√N_antennas, where the current configuration of 42 antennas supports efficient but relatively shallow surveys due to thermal noise limitations. Future expansions could deepen these mappings, allowing detection of fainter HI features and weaker transients.^[1]^[16]

SETI and Technosignature Searches

The Allen Telescope Array (ATA) was designed from its inception as a dedicated instrument for the Search for Extraterrestrial Intelligence (SETI), focusing on detecting narrowband radio technosignatures that could indicate intentional extraterrestrial transmissions.^[1] These searches scan for artificial signals characterized by their narrow bandwidth—typically less than 10 Hz—distinguishing them from natural astrophysical emissions, across a frequency range of 0.5 to 10 GHz to cover potential communication bands.^[16] Since 2015, the ATA has been a key component of the Breakthrough Listen initiative, which aims to observe approximately one million of the nearest stars and the centers of 100 nearby galaxies, prioritizing targets based on proximity and potential habitability to maximize detection prospects.^[40] The ATA's observation strategy leverages its phased array configuration to form multiple simultaneous beams, enabling efficient coverage of large sky areas and up to three targets at once without mechanical steering.^[1] This beamforming capability supports commensal observing modes, where SETI scans occur alongside other radio astronomy tasks. To account for relative motion, such as that induced by planetary orbits or Earth's rotation, searches incorporate Doppler drift analysis, examining signal frequency shifts up to several Hz per second to identify potential non-stationary technosignatures.^[41] The array achieves sensitivity to narrowband signals as weak as approximately 10^{-23} W m^{-2} Hz^{-1}, sufficient to detect an Arecibo-like transmitter out to several hundred parsecs under optimal conditions.^[42] Key SETI campaigns at the ATA include targeted observations of promising exoplanet systems. For instance, in late 2022, the array conducted 28 hours of beamformed observations of the TRAPPIST-1 system across 0.9–9.3 GHz, focusing on predicted planet-planet occultation windows for potential interplanetary communications; no technosignatures were detected, setting stringent upper limits on transmitter powers of 2–13 TW for minimal drift scenarios.^[41] The SETI Institute complements these radio efforts with the Laser SETI network for optical follow-ups, integrating all-sky optical monitoring to cross-verify radio candidates and search for pulsed laser technosignatures from the same stellar targets. Data analysis pipelines for ATA SETI observations emphasize real-time processing to handle the high data volume, including radio frequency interference (RFI) flagging to excise human-generated signals and tree-based dedispersion-like algorithms adapted for narrowband drift searches. Tools like turboSETI perform incoherent dedispersion and candidate filtering, reducing millions of potential signals to a few thousand for manual review.^[41] Target prioritization draws historical context from the Drake equation, which estimates the number of communicative civilizations (N) in the galaxy and informs selection criteria such as stellar density, habitable zone occupancy, and evolutionary timelines to focus on high-probability systems.^[43]

Opportunistic and Transient Astronomy

The Allen Telescope Array (ATA) enables opportunistic observing modes that allow rapid repurposing of the instrument for unexpected astronomical events, such as targeted SETI scans of transient objects. In 2017, the ATA conducted an eight-day observation campaign from November 23 to December 5, searching for narrow-band radio emissions from the interstellar object 'Oumuamua across frequencies from 1 to 10 GHz, but detected no artificial signals.^[44] Similarly, in response to the unusual dimming of the star KIC 8462852 observed in 2015, the ATA performed radio SETI observations between 1 and 10 GHz over more than two weeks, again finding no narrowband signals indicative of extraterrestrial technology.^[45] Additionally, the ATA has supported verification efforts for the Google Lunar X Prize by offering to provide data downlink services for contestant missions, facilitating real-time communication from lunar landers.^[46] For transient astronomy, the ATA employs the Fly's Eye instrument, a dedicated backend designed for real-time searches of fast radio transients like pulsars and fast radio bursts (FRBs). The Fly's Eye spectrometer processes data from up to 44 independent beams covering a wide sky area of approximately 150 square degrees at 1.4 GHz, enabling the detection of bright, dispersed pulses without dedicated pointing.^[47] In a 2024 follow-up campaign, the refurbished ATA, leveraging capabilities akin to Fly's Eye for transient monitoring, detected 35 bursts from the repeating FRB 20220912A during 541 hours of observations at 1.344 GHz, providing insights into its burst morphology and periodicity.^[30] Commensal observing at the ATA allows multiple principal investigators to access simultaneous data streams from the same telescope time, supporting diverse transient studies without conflicting schedules. For instance, the ATA has been used commensally to monitor radio emission from supernovae, such as the nearby SN 2023ixf, where observations within weeks of discovery enabled searches for technosignatures alongside standard astrophysical analysis.^[48] In another example, the ATA contributed to early radio afterglow detection of the exceptionally bright gamma-ray burst GRB 221009A, beginning observations 8.7 hours post-burst across 3 to 10 GHz and capturing rising reverse shock emission that revealed spectral evolution.^[49] In October 2025, the ATA provided radio observations of the tidal disruption event AT 2024tvd, detecting rapid radio emission bursts that indicated a supermassive black hole 2,600 light-years off-center in its host galaxy, highlighting the array's capabilities in time-domain astronomy.^[32] A key advantage of the ATA for opportunistic and transient work is its wide instantaneous field of view, which facilitates serendipitous discoveries during ongoing observations, as multiple beams can survey broad sky regions concurrently for unexpected events like FRBs or variable sources.^[50] This design supports flexible, event-driven science complementary to structured SETI programs.

Technical Components

Antennas and Array Layout

The Allen Telescope Array (ATA) comprises 42 individual radio telescopes, each equipped with a 6.1-meter diameter offset Gregorian dish constructed from hydroformed aluminum panels designed for high surface accuracy of approximately 5.9 μm rms. These dishes feature a lightweight, rigid structure optimized for operation at centimeter wavelengths, with the offset design minimizing blockage from the secondary reflector and feed support. Each antenna is mounted on an elevation-azimuth (alt-az) drive system, enabling precise tracking of celestial targets with slew rates up to 3° per second in azimuth and 1.5° per second in elevation.^[1] The array's layout at the Hat Creek Radio Observatory is configured to provide dense sampling in the uv-plane for interferometric imaging, with antennas positioned to yield baselines from very short separations (less than 10 meters) up to a maximum of 300 meters across the approximately 1-hectare site. This arrangement supports effective snapshot imaging over wide fields of view while maintaining good sensitivity to extended structures, and it allows for the formation of up to 4 independent beams through digital beamforming techniques that combine signals from subsets of the array.^[1] The feeds at each antenna incorporate cryogenically cooled low-noise amplifiers positioned at the focal point to reduce system noise temperature, paired with dual-polarization receivers capable of capturing all four Stokes parameters for polarization-sensitive observations. The ATA's design includes provision for significant expansion, with infrastructure supporting up to 350 antennas distributed over an extended area that could reach baselines of 900 meters. This upgrade would enhance angular resolution to roughly \theta \approx \lambda / B_{\max}, where \lambda is the observing wavelength and B_{\max} is the longest baseline, enabling finer-scale studies of compact sources while preserving the array's wide-field capabilities.

Instruments and Receivers

The receiver chains of the Allen Telescope Array utilize broadband feeds designed to capture dual-polarization signals across a wide frequency range. Initially, these feeds operated from 0.5 to 11 GHz, enabling comprehensive coverage for both astronomical and SETI observations.^[51] Significant upgrades to the receiver systems began in 2015, introducing new cooled feeds that extend the operational bandwidth to 0.9–14 GHz. These cryogenic feeds, housed in glass vacuum bottles and cooled to approximately 70 K, incorporate low-noise amplifiers to minimize thermal contributions, achieving system temperatures of 25–30 K from 1 to 5 GHz and 40–50 K up to 12.5 GHz.^[6] Further refurbishments starting in 2020 installed cryogenically-cooled log-periodic feeds (Antonio feeds) on up to 42 antennas by 2025, enhancing sensitivity across 1–14 GHz for transient and technosignature searches.^[1]^[52] The backend processors support versatile signal handling, including a software correlator that performs interferometric imaging by computing cross-correlations across the array's antennas.^[52] Complementing this, a real-time beamformer enables phased array operations, forming up to 4 independent beams for targeted pointing and simultaneous multi-object observations over bandwidths up to 10 GHz, split into four 1 GHz dual-polarization channels. Implemented on FPGA-based platforms and recent GPU-accelerated systems, the beamformer processes high data rates while allowing customizable beam shaping and interference excision.^[1]^[18] Calibration of the instruments relies on astronomical sources such as the Moon and Cassiopeia A to measure system temperature and correct for gain and phase variations, ensuring accurate flux density scaling with assumed aperture efficiencies around 60%.^[53] For interferometric data, self-calibration techniques use compact sources from surveys like NVSS to iteratively refine antenna gains, achieving phase errors below 1° after a few iterations on bright targets.^[54] Additionally, RFI monitoring employs dedicated systems like the RFI Monitor covering 100 MHz to 11 GHz, coupled with real-time vetoing through time blanking and adaptive nulling to suppress interferers such as GPS signals by over 30 dB while preserving >80% of the array's sensitivity.^[55] The ATA historically incorporated the "Fly's Eye" system (2007–2011) for transient detection, using a dedicated spectrometer across 44 signal paths to produce 128-channel spectra over 209 MHz centered at 1.43 GHz with 0.6 ms integrations for real-time searches of dispersed radio pulses. This system supported early wide-field surveys but is no longer in active use.^[56]

Data Processing and Management

The Allen Telescope Array (ATA) handles exceptionally high data volumes due to its wideband, multi-antenna operations, with inputs reaching up to 140 Gbps across 42 antenna signals and dual-polarization.^[18] Correlator outputs and beamformers generate substantial data rates, necessitating real-time filtering to manage the flow. For instance, historical surveys like the Fly's Eye accumulated approximately 18 TB over 450 hours.^[56] The core processing pipeline utilizes a custom FX correlator architecture in software form, where raw signals are spectrally decomposed (F transform) before cross-multiplication (X) across antenna pairs, enabling scalable interferometry for the ATA's 42 elements. Pulsar dedispersion is integrated for transient detection, covering a dispersion measure (DM) range of 50–2000 pc cm⁻³ to compensate for interstellar propagation effects.^[57] This pipeline leverages open-source tools from the Collaboration for Astronomy Signal Processing and Electronics Research (CASPER), including FPGA-based modules like IBOBs and ROACH boards for flexible, high-throughput signal handling, alongside recent GPU accelerations.^[58] Storage begins with on-site RAID arrays providing petabyte-scale capacity for immediate buffering, followed by off-site archiving via high-speed fiber optic connections to mitigate site-specific risks.^[1] Processed datasets are released publicly through the SETI Institute, supporting collaborative research while prioritizing data integrity and accessibility.^[1] As of November 2025, data processing has been enhanced by integration of NVIDIA IGX Thor edge AI platforms and a revolutionary AI system achieving 600× speed in signal detection, enabling real-time classification of potential technosignatures from the array's wide instantaneous bandwidth of up to 10 GHz. These upgrades address computational demands, previously estimated at approximately 100 TFLOPS, through parallel GPU processing to sustain correlation and beamforming without latency.^[8]^[9]

References

[1]
Allen Telescope Array (ATA) - SETI Institute
The ATA is the first radio telescope designed specifically for SETI (search for extraterrestrial intelligence) research. · Located at Hat Creek Radio Observatory ...
[2]
[PDF] The Allen Telescope Array: The First Widefield, Panchromatic ...
The design goals were (a) continuous frequency coverage over as wide a band as possible in the range 0.5 – 10 GHz for both SETI and conventional radio astronomy ...Missing: specifications | Show results with:specifications
[3]
UC Berkeley passes management of Allen Telescope Array to SRI
Apr 13, 2012 · Dedicated in 2007, the 42-dish ATA was built by UC Berkeley and the SETI Institute with major funding from the Paul G. Allen Family Foundation.
[4]
Search for alien signals stalls for want of cash - Nature
Nov 1, 2006 · Allen is withholding $3.85 million until the institute can “meet its contractual obligations”, says Jason Hunke, a spokesman for the Paul G.
[5]
[1702.02252] New Cooled Feeds for the Allen Telescope Array - arXiv
Feb 8, 2017 · The new feeds operate over the frequency range 0.9 to 14 GHz. The noise temperatures of the feeds have been substantially improved by cooling ...Missing: specifications | Show results with:specifications
[6]
SETI Institute Accelerates the Search for Life Beyond Earth with ...
Oct 28, 2025 · The new enterprise-ready NVIDIA IGX Thor platform brings real-time AI processing to the Allen Telescope Array, helping scientists detect signals ...
[7]
Ear to the Universe starts listening | Scientific American
Sep 16, 2009 · The family foundation of Microsoft co-founder Paul Allen provided US$25 million, beginning in 2000, to start the ATA. But in 2006, that stream ...<|control11|><|separator|>
[8]
Radio telescope array dedicated to astronomy, SETI - Berkeley News
Oct 11, 2007 · The first phase of this project was funded through generous grants from the Paul G. Allen Family Foundation totaling $25 million. UC Berkeley, ...
[9]
The One-Hectare Telescope - ResearchGate
Aug 9, 2025 · The 1HT will be a large area telescope whose novel characteristics will be a wide field of view, continuous frequency coverage from .500 ...
[10]
Paul G. Allen Charitable Foundation Funds Next Phase in ...
Mar 22, 2004 · The SETI Institute and UC Berkeley announce phased construction plan of the Allen Telescope Array. Three years of successful research and ...Missing: Family | Show results with:Family
[11]
Allen Telescope Array begins | Astronomy.com
Oct 16, 2007 · The first 42 radio dishes of the Allen Telescope Array (ATA) are activated and collecting scientific data from the far reaches of the universe.Missing: 2.45 21<|separator|>
[12]
The Allen Telescope Array
### Summary of Allen Telescope Array (ATA) Information
[13]
[PDF] The Allen Telescope Array: The First Widefield, Panchromatic ...
Highlights of the system are the frequency agility, the low background and sidelobes of the antennas, the wideband feed and input receiver, the analog fiber ...
[14]
[PDF] Packet Switched, General Purpose FPGA-based ... - CASPER
University of California, Berkeley; Swinburne University (Australia), ... Allen Telescope Array (90 uS imaging – G. Jones) ... CASPER FXB Correlator/Beamformer. ( ...
[15]
Real‐time beamforming using high‐speed FPGAs at the Allen ...
Feb 24, 2011 · ... telescope currently consisting of 42 offset-Gregorian antennas each with a 6 m aperture, with plans to expand the array to 350 antennas.
[16]
A Primer on SETI at the SETI Institute
The Allen Telescope Array in Hat Creek, California. The Allen Telescope Array (ATA) was named after its principal supporter, Paul Allen, the co-founder of the ...
[17]
UC Berkeley, SETI Institute ready to build first phase of Allen ...
Mar 22, 2004 · Eventually, 350 of these 6.1-meter-diameter dishes will be assembled to form the Allen Telescope Array, the largest radio array in the world.
[18]
Allen Telescope Array digital processing requirements driven by ...
Jul 14, 2005 · equation image max and νmax. The highest frequency in the Fourier expansion of c comes from the longest baseline in the array. For time passage ...
[19]
Budget Cuts Shutdown SETI's Alien-Seeking Telescopes - NPR
Apr 26, 2011 · Right now, budget cuts in both federal and state governments have slashed the size of the Hat Creek Radio Observatory to about one-tenth the size it used to be.Missing: hiatus Berkeley
[20]
SETI telescope array suspends operations due to financial constraints
Apr 26, 2011 · The array has been put into hibernation mode, with a skeleton crew to keep it from deteriorating, while SETI looks for new sources of cash.Missing: hiatus | Show results with:hiatus
[21]
SRI International to Manage the Hat Creek Radio Observatory and ...
Apr 13, 2012 · SRI International is the new manager of the Hat Creek Radio Observatory (HCRO) facility in Northern California, home of the Allen Telescope Array.
[22]
Search for Aliens Is on Again, but Next Quest Is Finding Money
Jan 29, 2012 · The Allen Array, which was designed to find Dr. Drake his million stars, is named after Paul G. Allen, the Microsoft founder and philanthropist, ...
[23]
Search for ET continues as Paul Allen-backed telescope hits short ...
Aug 7, 2011 · In 2001, Microsoft co-founder Paul Allen agreed to bankroll the initial construction of the radio telescope array, investing tens of millions ...
[24]
SETI Institute Receives $3.5 Million Donation from Qualcomm Chief ...
Nov 14, 2012 · SETI Institute Receives $3.5 Million Donation from Qualcomm Chief Scientist Franklin Antonio. Gift Will Enhance Telescope to Search for Life on ...
[25]
Circulars - 40979 - Radio observation of GRBs 250702B,C,E ... - GCN
Jul 5, 2025 · The Allen Telescope Array refurbishment program and its ongoing operations are being substantially funded through the Franklin Antonio Bequest.
[26]
New Cooled Feeds for the Allen Telescope Array - IOPscience
Each antenna utilizes a 6.1 meter diameter primary reflector and a 2.4 meter secondary with offset Gregorian optics to minimize the interference scattered ...
[27]
https://www.prnewswire.com/news-releases/seti-institute-receives-35-million-donation-from-qualcomm-chief-scientist-franklin-antonio-179305761.html
[28]
Characterization of the repeating FRB 20220912A with the Allen ...
2.1 The Allen Telescope Array: instrument specifications. The ATA is a 42-element interferometer consisting of 6.1 m dishes hosted on the Hat Creek Radio ...
[29]
A Radio Technosignature Search of TRAPPIST-1 with the Allen ...
This work constitutes the longest single-target radio search for extraterrestrial intelligence of TRAPPIST-1 to date.
[30]
The Ultimate Guide to the Allen Telescope Array
Oct 20, 2024 · ... frequency range from 0.5 to 11.2 GHz. This range covers key astronomical and SETI frequencies, including the “water hole” region between ...<|separator|>
[31]
Welcome to Hat Creek Radio Observatory - SETI Institute
We are home to the Allen Telescope Array, the only instrument designed specifically for the purpose of conducting SETI research.
[32]
Results from the Allen Telescope Array: HI in Galaxy Groups - ADS
This survey will look for extensions of the HI disks as well as intergalactic HI. The combination of the ATA's sensitivity and large beam make this instrument ...
[33]
The Unique Capabilities of the Allen Telescope Array for Pulsar ...
I will discuss the most transformative current application of millisecond pulsars: the direct detection of gravitational waves. Timing an array of pulsars could ...
[34]
International Pulsar Timing Array
The goal of the IPTA is to detect and characterize the low-frequency gravitational wave universe through timing a global array of approximately 100 millisecond ...
[35]
A LARGE SURVEY FOR SLOW GALACTIC RADIO TRANSIENTS. I ...
We present a large 3 GHz survey performed with the Allen Telescope Array (ATA) that aims to improve this situation: ASGARD, the ATA Survey of Galactic Radio ...
[36]
[PDF] Radio Transient Searches with the Allen Telescope Array
Radio transient searches constitute a major research goal of the ATA. The powerful survey capability and the commensal observing mode of the ATA enables a wide.
[37]
Target Selection of Nearby Stars and Galaxies - arXiv
Jan 22, 2017 · We present the target selection for the Breakthrough Listen search for extraterrestrial intelligence during the first year of observations.
[38]
A Radio Technosignature Search of TRAPPIST-1 with the Allen ...
Sep 12, 2024 · 28 hours of beamformed data taken with the Allen Telescope Array (ATA) during late October and early November 2022, from 0.9--9.3~GHz, targeting TRAPPIST-1.Missing: scan | Show results with:scan
[39]
SETI Observations of Exoplanets with the Allen Telescope Array
Jul 14, 2016 · We detected no persistent signals from extraterrestrial technology exceeding our frequency-dependent sensitivity threshold of 180 - 310 x 10^-26 ...Missing: range | Show results with:range
[40]
Drake Equation - SETI Institute
What It Is: A probabilistic formula, devised by Dr. Frank Drake in 1961, to estimate the number of communicative civilizations in the Milky Way.Missing: target Breakthrough
[41]
Radio SETI observations of the interstellar object ′OUMUAMUA
The Allen Telescope Array (ATA) was used over the course of eight days from November 23 – December 5, 2017 to search for non-natural narrow-band radio emissions ...Missing: scan | Show results with:scan
[42]
Radio SETI Observations of the Anomalous Star KIC 8462852 - arXiv
Nov 5, 2015 · Observations were made at radio frequencies between 1-10 GHz using the Allen Telescope Array. No narrowband radio signals were found at a level ...
[43]
Google to Sponsor $30 Million Lunar X Prize - Space
Sep 13, 2007 · The goal of the new prize will be to land a privately funded robotic rover on the Moon that is capable of completing several mission objectives, ...
[44]
The Allen Telescope Array Fly's Eye Survey for Fast Radio Transients
Sep 13, 2011 · Here we present results from the 450 hour, 150 deg^2 Fly's Eye survey for bright dispersed radio pulses at the Allen Telescope Array (ATA). The ...
[45]
Real-time Technosignature Strategies with SN 2023ixf - IOPscience
SN 2023ixf provides a unique opportunity to monitor the SETI Ellipsoid of a nearby supernova within weeks of its discovery. The Allen Telescope Array (ATA) ...
[46]
Precise measurements of self-absorbed rising reverse shock ...
Jun 29, 2023 · Constraining gamma-ray burst initial Lorentz factor with the afterglow onset feature and discovery of a tight Γ0–Eγ,iso correlation.
[47]
[1201.5413] The Allen Telescope Array Commensal Observing System
Jan 25, 2012 · Abstract:This memo describes the system used to conduct commensal correlator and beamformer observations at the Allen Telescope Array (ATA).
[48]
The Allen Telescope Array | Request PDF - ResearchGate
Oct 16, 2025 · Ultimately, the array will consist of 350 antennas, each 6.1m in diameter, extending over a maximum baseline of 900 m. ... Exoplanets ...
[49]
THE ALLEN TELESCOPE ARRAY TWENTY-CENTIMETER ...
The ATA has 42 dual-polarization antennas, but the ATATS survey was undertaken during a period when the array was still being commissioned, and at times, ...
[50]
(PDF) The Allen Telescope Array - Radio Astronomy - ResearchGate
Aug 5, 2025 · Each antenna utilizes a 6.1 meter diameter primary reflector and a 2.4 meter secondary with offset-Gregorian optics to minimize the ...
[51]
[PDF] Allen Telescope Array Imaging - Nasa Lambda
The Allen Telescope Array (ATA) is being designed as an array of 350 6-m antennas with ... The array configuration has been designed to give a Gaussian beam with.
[52]
[PDF] An RFI Mitigation Strategy for the Allen Telescope Array - IUCAF
Abstract. The Allen Telescope Array faces unprecedented challenges and opportunities with respect to radio frequency interference. Its broad-.
[53]
The Allen Telescope Array Fly's Eye Survey for Fast Radio Transients
**Summary of Fly's Eye for Transient Detection and GPU-based Pulse Finders:**
[54]
ATA "Fly's Eye" Pulse Finder - Casper
### Summary of ATA "Fly's Eye" Pulse Finder and GPU-Based Aspects for Transient Detection
[55]
https://www.iucaf.org/sschool/geoff/bowers.pdf
[56]
THE ALLEN TELESCOPE ARRAY FLY'S EYE SURVEY FOR FAST ...
The Fly's Eye Spectrometer produces 128 channel power spectra over a 209 MHz bandwidth, centered at 1430 MHz, on 44 independent signal paths originating with 30 ...
[57]
Andrew Siemion for the ATA Team, UC Berkeley ... - CASPER
using the Allen Telescope Array (ATA). In this ... De-dispersion. DM 0. (dedisperse) .... .... Frequency ... ‣ DM search range: 50-2000 pc/cm3. (with ...
[58]
https://casper.berkeley.edu