Fact-checked by Grok 2 weeks ago

Block and tackle

A block and tackle is a compound pulley system comprising one or more fixed and movable pulleys arranged in blocks, through which a rope or cable is threaded to lift heavy loads by distributing the force required across multiple supporting segments.^[1] This arrangement provides a mechanical advantage equal to the number of rope segments supporting the load, allowing a smaller input force to achieve the necessary lifting power while often changing the direction of the applied force.^[2] For instance, a configuration with four supporting ropes yields a mechanical advantage of four, meaning only one-quarter of the load's weight needs to be applied as effort.^[3] While simple pulleys were used in ancient Mesopotamia around 1500 BCE for tasks like hoisting water, the origins of the compound block and tackle trace back to ancient Greece, where the mathematician and inventor Archimedes is credited with developing the first documented system around the 3rd century BCE, as recorded by the historian Plutarch.^[2] Archimedes utilized the device in military applications, including defensive mechanisms like the Claw of Archimedes during the Siege of Syracuse, which employed mechanical advantage through pulleys for leverage in defense and engineering.^[4] Subsequent refinements appeared in the works of Hero of Alexandria in the 1st century CE, who described pulley assemblies for cranes and lifting mechanisms, building on earlier principles to enhance efficiency in construction and transportation.^[5] In modern applications, block and tackle systems are essential in maritime rigging for hoisting sails and cargo on ships, in construction cranes to elevate heavy materials with reduced effort, and in rescue operations for hauling equipment or personnel in confined spaces.^[6] These systems also find use in industrial settings, such as drilling rigs for managing loads, and in everyday tools like theater fly systems or fitness equipment, where their ability to multiply force makes complex tasks more manageable.^[7] Despite friction losses in real-world use, the design's versatility continues to underpin many mechanical engineering solutions for load handling.^[8]

Introduction

Definition and basic operation

A block and tackle is a mechanical system consisting of two or more pulleys, known as blocks, arranged with a rope or cable threaded through them to provide mechanical advantage in lifting or moving heavy loads.^[9] The system typically includes at least one fixed block, which is anchored in place, and one movable block attached to the load, allowing the force applied to the rope to be distributed across multiple segments.^[10] At its core, a block and tackle builds on the principle of pulleys as simple machines that redirect the direction of an applied force, enabling a user to lift objects more easily by changing the force's path without altering its magnitude in a single-pulley setup.^[9] By combining multiple pulleys into blocks, the system multiplies this effect, trading a greater distance of rope pull for reduced effort, which provides an overall mechanical advantage proportional to the number of supporting rope segments.^[11] In basic operation, the rope is reeved—threaded alternately through the sheaves (grooved wheels) of the fixed and movable blocks—starting from an anchor point or the load itself, with the free end pulled by the operator.^[10] Pulling this free end causes the movable block to rise, lifting the attached load as the rope segments supporting it shorten, effectively redirecting and distributing the pulling force to overcome the load's weight with less input effort.^[11] A simple example is a setup with one fixed pulley block attached to a ceiling and one movable pulley block connected to a weight, such as a 100-pound load suspended by a rope reeved through both.^[9] In this configuration, pulling the rope's free end downward lifts the weight upward, requiring only half the load's weight in pulling force but twice the distance traveled by the rope compared to the load's movement.^[10]

Historical development

The development of block and tackle systems traces back to ancient Greece, where the mathematician Archimedes is credited with inventing the compound pulley around the 3rd century BCE, utilizing it in military applications such as hoisting ships during the Siege of Syracuse, as recorded by Plutarch.^[12] Building on these principles, the earliest surviving descriptions appear in the works of Hero of Alexandria in the 1st century CE, where he detailed assemblies of pulleys for use in cranes and other lifting devices in his treatise Mechanica. Hero explained compound pulley arrangements, noting that the mechanical advantage increases with the number of rope segments supporting the load, enabling heavier weights to be lifted with reduced force. These systems were applied practically in ancient construction and hoisting operations. During the medieval and Renaissance periods, block and tackle systems saw widespread adoption in European sailing ships and construction projects, with designs improving through the practical application of Archimedes' principles of leverage and force distribution. In naval contexts, these systems facilitated rigging and sail management on vessels, allowing crews to handle larger sails and masts efficiently; for instance, compound pulleys were integral to hoisting mechanisms on Mediterranean and later Atlantic ships. In construction, Renaissance engineers like Leonardo da Vinci and Galileo Galilei refined pulley designs, incorporating multiple sheaves for greater durability and precision in building cranes and shipyards, as documented in treatises such as Galileo's Le Mecaniche.^[12] In the 18th and 19th centuries, block and tackle underwent standardization, particularly in naval rigging through initiatives like the British Royal Navy's Portsmouth Block Mills, established in 1802–1805 to mass-produce wooden pulley blocks using innovative machinery designed by Marc Isambard Brunel. This facility supplied up to 130,000 blocks annually, enabling consistent sizing and quality for ship rigging and reducing labor needs dramatically. Industrially, these systems were adapted for warehouses and factories, where they lifted heavy goods like cotton bales and machinery components, supporting the growth of trade and manufacturing during the Industrial Revolution.^[13] Key developments in this era included the introduction of iron blocks in the mid-19th century, which offered superior durability over wooden ones for high-stress applications in shipping and industry, with metal sheaves becoming common by the 1860s to reduce wear. Concurrently, the transition from hemp ropes to wire cables began around 1834, pioneered by Wilhelm Albert in Germany for mining but soon adopted in maritime and industrial tackles for their greater strength and longevity, revolutionizing load capacities in block and tackle configurations.^[14]^[15]

Components

Blocks and sheaves

In block and tackle systems, blocks serve as the primary structural housings for the pulleys, typically consisting of a shell or casing that encloses one or more sheaves. Fixed blocks are anchored to a stable structure, such as a beam or frame, and remain stationary during operation to redirect the pulling force.^[16] Movable blocks, also known as running blocks, are attached directly to the load and travel with it, allowing the system to multiply the applied force through multiple rope paths.^[17] These blocks are constructed with compartments to accommodate multiple sheaves, enabling complex rope routing for enhanced mechanical advantage.^[18] Sheaves are the grooved wheels mounted within the blocks, designed to rotate freely on axles known as pins or spindles, guiding the rope along its path while minimizing wear.^[17] The number of sheaves in a block—ranging from single-sheave units for basic redirection to double or treble blocks with two or three sheaves—determines the possible rope configurations and load capacity.^[16] Historically, sheaves were crafted from dense woods like lignum vitae for its natural low-friction properties, often running on wooden or iron pins; in modern designs, they incorporate iron, steel alloys, or composites such as nylon for durability and reduced maintenance.^[18]^[17] Key design features of blocks include beckets, which are integrated loops or eyes at one end for securing the rope's dead end, and attachment points such as hooks or shackles for connecting to loads or fixed points.^[19] The shell, often made from wood in early iterations or metal casings today, protects the sheaves and includes openings like the swallow (the gap for rope entry) and breech (the base access) to facilitate assembly and operation.^[17] Over time, materials evolved from lignum vitae and elm wood casings in 18th-century maritime applications for their strength and self-lubricating qualities to steel and synthetic composites in contemporary heavy-duty uses, improving load-bearing capacity while reducing weight.^[18]^[17]

Ropes and lines

In block and tackle systems, ropes serve as the flexible linear elements that transmit force through the pulleys, and their selection depends on the application's load requirements and environmental conditions. Historically, natural fiber ropes such as hemp and manila were predominant due to their availability and suitability for maritime and construction uses; hemp provided strength and durability in sailing ship rigging, while manila, derived from abaca plant fibers, offered natural oil content for water resistance and flexibility in hoisting operations. ^[20] ^[21] Modern applications favor synthetic ropes like nylon and polyester for their low stretch and enhanced performance; nylon ropes exhibit high elasticity and shock absorption, making them ideal for dynamic loads in pulley systems, while polyester provides superior resistance to abrasion and UV degradation with minimal elongation under tension. ^[22] ^[23] For heavy industrial loads, wire ropes constructed from high-carbon steel wires are preferred, offering exceptional breaking strength—often exceeding 100 tons for large diameters—and low elasticity to maintain precise control in hoisting tackles. ^[24] Key properties of ropes in these systems include diameter, which determines compatibility with sheave grooves and overall system capacity; breaking strength, typically rated at a minimum factor of 5 times the safe working load for wire ropes; and elasticity, where synthetic options like nylon allow up to 30% elongation before failure to absorb shocks, contrasting with wire ropes' apparent modulus of elasticity around 10-15 x 10^6 psi for stable positioning. ^[24] ^[25] The coefficient of friction influences energy loss as the rope interacts with sheaves, with smoother synthetics like polyester reducing it to approximately 0.1-0.2 compared to natural fibers' higher values; flexibility is critical to prevent binding in sheaves, as stiffer ropes can cause uneven wear and reduced efficiency. ^[22] ^[26] Rope ends require secure fittings to ensure safe load distribution, including splices for seamless integration, thimbles inserted into eye splices to protect against abrasion and maintain shape under load, and seizings—tight wrappings of smaller cord or wire—to bind strands and prevent unlaying during cutting or attachment. ^[27] ^[28] Sizing of ropes and fittings is determined by the anticipated load and mechanical advantage of the tackle, with diameters selected to achieve at least 80-95% efficiency in spliced terminations relative to the rope's full breaking strength. ^[27] Proper maintenance extends rope service life and safety; regular inspection involves checking for wear such as broken wires (replacing if more than 10% in any strand), kinks, corrosion, or diameter reduction, conducted daily visually and monthly in detail for hoisting applications. ^[29] Lubrication reduces internal friction and prevents rust, using penetrating oils applied evenly to saturate the core, particularly for wire ropes, while synthetic ropes may require lighter coatings to avoid slippage; natural fiber ropes benefit from tar or oil treatments to maintain pliability. ^[29] ^[30]

System Configurations

Simple and compound tackles

A simple tackle consists of a single pair of blocks—one fixed and one movable—with the rope reeved through one or two sheaves to change the direction of force or provide basic lifting capability.^[31] The fixed block is secured to a stationary support, while the movable block attaches to the load, allowing the system to redirect effort from vertical to horizontal or vice versa.^[16] The reeving process involves threading the rope alternately through the sheaves of the fixed and movable blocks, starting from the standing end, which is the fixed portion attached to the support or load, and ending at the hauling end, the free portion pulled by the operator.^[32] For a basic single whip setup, the rope passes over a single sheave in the fixed block, with the hauling end extending downward; this configuration uses one sheave total and primarily alters force direction.^[16] In a double whip arrangement, the rope threads through a sheave in the fixed single-sheave block, then into the movable single-sheave block, and returns to be secured at the fixed block's becket, creating a looped path that engages both blocks more fully.^[10] A gin tackle setup employs a double-sheave fixed block and a triple-sheave movable block, with the rope reeved through the sheaves of both blocks to provide a mechanical advantage of 5:1 when rove to advantage. The standing end is secured to the fixed block's becket, the rope passes through the movable block's sheaves and returns through the fixed block's sheaves, with the hauling end pulled from the fixed block.^[33] Compound tackles assemble multiple simple tackles either in series, where the hauling end of one simple system connects to the movable block of another, or in parallel, where multiple ropes or blocks share the load distribution to enhance overall capability.^[32] This combination allows for greater complexity in lifting heavier loads by extending the reeving path across additional blocks, with the standing end remaining anchored and the hauling end pulled to actuate the entire assembly.^[10] For instance, chaining two simple 2:1 systems in series forms a compound setup that multiplies the basic effect, requiring careful alignment to ensure even rope tension.^[31]

Specific types

Specific types of block and tackle systems encompass several named configurations that build upon simple and compound principles, differentiated primarily by the number of sheaves and the reeving pattern to suit varying load capacities.^[34] Gun tackle consists of two sheaves in total, with one in the fixed block and one in the movable block, providing a mechanical advantage of 2:1. This setup is suited for light loads, such as flag hoisting or basic pulling tasks where simplicity and minimal force multiplication are sufficient.^[34] Luff tackle features three sheaves, typically arranged with two in the fixed block and one in the movable block, yielding a 3:1 mechanical advantage. It is commonly employed in sailing applications, such as handling sheets to adjust sails, due to its efficiency for moderate loads in dynamic environments.^[34] Double tackle utilizes four sheaves, with two in each block (fixed and movable), achieving a 4:1 mechanical advantage for heavier lifting requirements. This configuration finds use in rigging operations on sailing vessels or construction sites, where increased power is needed without excessive complexity.^[34] Other specialized types include gyn tackle, which employs five sheaves (often a combination of double and triple blocks) for a 5:1 advantage, ideal for heavy cargo operations in maritime settings.^[35] Threefold purchase incorporates six sheaves (three per block) to deliver a 6:1 mechanical advantage, maximizing force multiplication for large-scale industrial lifting tasks.^[34] Snatch blocks, typically single-sheave units with a side-opening housing, allow for temporary mid-line insertion of ropes without full reeving, enhancing flexibility in rigging by redirecting loads or boosting pulling capacity in winching applications.^[36] These configurations vary in load capacity based on sheave count and reeving, enabling selection for tasks ranging from light manual operations to substantial hoisting demands.^[34]

Mechanical Advantage

Theoretical principles

The theoretical foundation of mechanical advantage in a block and tackle system rests on the principle that, under ideal conditions, the mechanical advantage (MA) equals the number of rope strands (n) supporting the load, such that MA = Load / Effort = n.^[37] This relationship arises because each supporting strand shares the load equally, distributing the weight across multiple segments of the rope.^[38] The core equation for the effort force required to lift a load is derived as F_e = \frac{W}{n}, where F_e is the effort force, W is the weight of the load, and n is the number of supporting strands; this assumes a frictionless system with an inextensible, massless rope.^[37] In this ideal model, the pulleys act solely to redirect forces without introducing losses, allowing the system to achieve perfect load distribution.^[39] This theoretical MA ignores real-world energy losses and is derived from the conservation of work, where input work equals output work: F_e \times d_e = W \times d_w, with d_e and d_w being the distances moved by the effort and load, respectively.^[39] Since the velocity ratio of the system equals n (the load moves 1/n the distance of the effort), the equation simplifies to confirm MA = n under these assumptions.^[38] The value of n, and thus the theoretical MA, is influenced by the number of pulleys in the blocks and the direction of reeving the rope through the sheaves, which determines how many strands actively support the load in a given configuration.^[37]

Rove to advantage

In block and tackle systems, rove to advantage refers to a reeving configuration where the hauling part of the rope is led from the moving block, aligning the direction of the applied effort with the direction of load movement. This setup ensures that pulling the rope moves it in the same general direction as the load travels, such as pulling upward to raise a load or horizontally to haul sideways.^[16]^[40] The mechanical advantage (MA) in this configuration equals the number of rope segments (n) directly supporting the load, as derived from the theoretical principles of pulley systems where each supporting rope shares the load equally under ideal conditions. The effort required to lift the load is thus load divided by n, and the hauler must travel a distance of n times the load's displacement to achieve the lift, reflecting the system's velocity ratio. For instance, in a four-rope supporting system rove to advantage—such as a watch tackle with a double block and single block—n = 4, yielding an MA of 4 and requiring an effort of one-quarter the load weight.^[40]^[41]^[16] This reeving method offers one additional supporting rope compared to the disadvantage configuration for the same blocks, maximizing MA and thus minimizing effort for a given setup; it is particularly suited to applications where space permits aligned pulling, such as horizontal cargo handling or certain overhead crane operations that benefit from directional efficiency.^[41]^[16]

Rove to disadvantage

In the rove to disadvantage configuration, the rope is reeved through the blocks such that the hauling part leads from the fixed (standing) block, resulting in the direction of pull being opposite to the movement of the load.^[42] For example, in setups where the load is anchored below the fixed block, the hauler pulls upward to raise the load upward.^[40] The mechanical advantage in this configuration equals the number of rope strands (n) supporting the load, yielding values typically one less than the advantage setup for the same blocks (often odd numbers in simple cases). In such systems, the hauler travels a distance equal to n times the load movement, allowing for relatively faster load speed compared to the advantage configuration with more strands.^[42] A representative example is a three-rope support system, such as a luff tackle rove to disadvantage, which provides an MA of 3, with the hauler traveling three times the load distance; this setup is particularly useful in tight spaces, such as ship rigging where space limits direct pulling alignment.^[43] This configuration provides less force reduction than the advantage reeving for the same blocks but requires fewer reeving steps in some setups, potentially simplifying assembly in constrained environments.^[40]

Practical Considerations

Friction and efficiency

In block and tackle systems, friction significantly reduces the theoretical mechanical advantage by dissipating energy through several mechanisms, primarily sheave bearing friction, rope-groove drag, and bending losses. Sheave bearing friction arises from the rotation of the pulley wheel on its axle, where resistance in bushings or bearings converts mechanical energy into heat. Rope-groove drag occurs as the rope slides or grips within the sheave's groove, influenced by the rope's material and surface conditions. Bending losses happen when the rope flexes around the sheave, causing internal fiber strain and further energy dissipation. These losses compound with the number of sheaves, as each additional pulley introduces more contact points and cumulative resistance, leading to progressively lower overall performance in compound configurations.^[44]^[45] The actual mechanical advantage (MA) in a real system is given by the formula Actual MA = Theoretical MA × η, where η represents the system efficiency (a value less than 1). This efficiency accounts for frictional losses and can be approximated using a belt friction model adapted to sheave interactions, as η = e^{-μθ N}, with μ as the friction coefficient (typically 0.1–0.3 for lubricated rope-sheave contact), θ as the contact angle (often π radians for a half-wrap around the sheave), and N as the number of sheaves. This exponential form derives from the capstan equation, which models tension decay across each sheave, resulting in multiplicative losses across the system.^[46]^[45] Quantitatively, well-lubricated single-pulley systems achieve efficiencies of 90–95%, but compound tackles with multiple sheaves see greater degradation, often dropping to 70–80% overall due to accumulated losses; for instance, a theoretical 5:1 system may deliver only about 4:1 actual advantage. In highly complex setups with many sheaves, efficiencies can fall as low as 50%, emphasizing the need for design optimization.^[44]^[10] To mitigate these losses, modern designs incorporate ball bearings in sheaves to reduce rotational friction compared to plain bushings, and lubricants such as grease or oils are applied to bearings and rope grooves to lower μ. Proper sheave sizing (tread diameter at least three times the rope diameter) minimizes bending stress, while aligning the rope at 180° to the sheave axle avoids additional drag. Efficiency is quantified through testing methods like dynamometer pulls, where input effort and output load are measured under controlled conditions to compute η directly.^[44]^[45]

Mid-line attachments

Mid-line attachments enable the quick integration of blocks into an existing rope line without the need for complete reeving, facilitating temporary modifications to rigging setups such as adding a lift point or redirecting force during operations.^[36] This approach is particularly valuable in dynamic environments where lines are already under tension, allowing riggers to adapt systems on the fly for tasks like load adjustments or obstacle navigation.^[47] The primary method involves snatch blocks, which feature a hinged or pivoting side plate that opens to accept the rope mid-line, then secures shut to guide the line over the sheave.^[48] Swing cheek blocks operate similarly, with cheeks that swing open for insertion, providing a lightweight option for lighter loads or force redirection in marine applications.^[49] Clamp or hook attachments, such as those using forged alloy hooks or wire rope clips, secure the block directly to the line via gripping mechanisms, suitable for non-reeved contact in short-term rigging.^[48]^[50] Open fairleads represent another type, functioning as insertion points with slotted or hinged designs that allow the rope to be threaded mid-line without full disassembly, often used to maintain line alignment in constrained spaces.^[51] In sailing, snatch blocks and open fairleads are commonly employed for adjusting genoa sheets or control lines on deck, enabling rapid changes without halting maneuvers.^[52] Arborist work utilizes these attachments for tree rigging, where snatch blocks insert into lowering lines to create temporary anchor points during branch removal or limb lowering.^[36] These attachments introduce additional friction at the contact point due to non-reeved engagement, which can increase localized losses compared to fully reeved systems, as discussed in considerations of overall efficiency.^[53] Load limits for mid-line setups are typically lower than those for traditional reeving, with working load limits (WLL) determined by factors like line angle and sheave size— for instance, a snatch block under a 0° angle may support double the line pull, but this capacity decreases with deflection.^[48] Proper selection, including bearing types like bronze bushings for reduced friction, ensures safe operation within these constraints.^[36]

Applications

Traditional uses

Block and tackle systems have been integral to manual heavy lifting in various pre-industrial societies, enabling workers to manage substantial loads with reduced effort through mechanical advantage. Originating from ancient innovations, these pulley arrangements facilitated tasks that would otherwise require immense human or animal power, spanning from antiquity to the early modern era. In maritime contexts, block and tackle were essential for ship rigging and operations. Sailors used them to hoist and adjust sails on vessels during the Age of Sail, allowing precise control over massive canvas arrays in response to wind conditions. For instance, on 18th-century warships, elaborate tackle systems were employed to handle cannons, enabling rapid loading and firing by distributing the weight across multiple ropes and pulleys during naval battles. Additionally, these systems were crucial for raising anchors, which could weigh several tons, preventing vessels from drifting while minimizing crew strain. Construction projects in ancient and medieval times heavily relied on block and tackle for elevating heavy materials. In medieval Europe, similar setups supported the erection of cathedrals, such as lifting granite and marble stones to great heights via scaffolding integrated with tackle systems, as seen in the construction of Gothic structures like Notre-Dame. These applications allowed builders to achieve architectural feats without modern machinery, relying on coordinated teams to operate the rigs. Beyond maritime and construction, block and tackle found applications in theater and resource extraction. In early modern European theaters, fly systems utilizing multiple pulley blocks suspended and lowered scenery, enabling seamless scene changes in productions from the Renaissance onward. In mining and well-digging operations, miners employed tackle to haul buckets of ore or water from deep shafts, a practice documented in Roman and medieval European sites where the systems reduced the physical burden on laborers working in hazardous environments. A notable case study is the construction of the Parthenon in ancient Athens around 447–432 BCE, where lifting mechanisms such as ramps, levers, and ropes aided in positioning the temple's massive marble columns and entablature, each weighing over 10 tons, for precise elevation. Similarly, on Age of Sail warships like HMS Victory, comprehensive tackle arrays not only managed sails and anchors but also facilitated the loading of provisions and armaments, underscoring their versatility in sustaining long voyages and combat readiness.

Modern implementations

In industrial settings, block and tackle systems are integral to cranes, where multiple sheaves in traveling blocks and crown blocks facilitate heavy lifting with wire rope, enabling capacities exceeding hundreds of tons in construction and manufacturing operations.^[54] Elevators, particularly traction types, employ pulley-based block and tackle configurations with counterweights to achieve efficient vertical transport, reducing required motor power by balancing loads in high-rise buildings.^[31] In drilling rigs on oil platforms, hoisting systems incorporate traveling blocks and hooks with wire rope tackles to handle drill strings weighing up to several hundred tons, supporting automated operations through powered drawworks.^[55] Powered winches integrated with block and tackle enhance automation, as seen in electric models that multiply pulling force via snatch blocks for precise load control in logistics and recovery tasks.^[56] Specialized applications include arboriculture, where snatch blocks designed for dynamic loads allow arborists to redirect and lower heavy tree sections during trimming, accommodating ropes up to 3/4 inch in diameter for safe rigging.^[57] In rescue operations, high-angle rope systems utilize compact block and tackle setups providing 4:1 mechanical advantage for hauling personnel or equipment in confined or vertical environments, such as urban search and rescue scenarios.^[58] Fitness equipment incorporates pulley weight machines based on block and tackle principles, enabling variable resistance training through adjustable cable systems that simulate free weights with reduced joint stress.^[59] Advancements in materials include synthetic ropes, such as high-modulus polyethylene, which offer superior strength-to-weight ratios and corrosion resistance compared to traditional wire ropes, improving performance in marine and outdoor block and tackle applications.^[60] Self-lubricating sheaves with oil-impregnated bronze bushings reduce maintenance needs by minimizing friction during high-cycle operations, extending service life in demanding environments.^[61] Integration with hydraulics and electrics creates hybrid lifts, where electric motors drive winches paired with pulley blocks for energy-efficient elevation, as in automated cargo platforms that combine mechanical advantage with variable-speed control.^[62] Safety standards mandate that all blocks in hoisting systems be marked with their safe working load, typically rated at 5:1 safety factors, and inspected regularly to prevent failures under dynamic loads.^[63]

References

[1]
[PDF] The Wonderful World of Simple Machines
A block and tackle is a compound pulley; in other words, it is a combination of a fixed and moveable pulley.
[2]
[PDF] Reading on Mesopotamia The Fertile Crescent
Mechanical advantage is determined by the number of supporting ropes of the movable pulley(s). A compound pulley, also called a block and tackle, is a ...
[3]
[PDF] Pulley System Mechanical Advantage
block and tackle with four supporting rope segments offers a mechanical advantage of 4, meaning you only need 25% of the force to lift the load compared to ...
[4]
[PDF] A Brief History of Astronomy
Mar 29, 2018 · ▷ Studied and explained levers; created block-and-tackle pulley systems. Page 10. Parables 6= History. Archimedes (ca. 287-212 BCE).
[5]
[PDF] Basic Machines And How They Work
Movable Pulley: Moves with the load, providing a mechanical advantage by reducing the input force needed. Complex pulley systems, known as block and tackle, ...
[6]
39-245 Project 3: Mechanical Advantage - Pulley System
A pulley system, also known as a block and tackle, uses ropes and small wheels to either change the direction of the application of force on an object or to ...
[7]
[PDF] The Blocks and Drilling Line - Petroleum Extension (PETEX)
Offshore, crewmembers rig wire-rope slings and lifting lines to cranes, which move equipment and personnel to and from boats. Except for the lines a rig-up crew ...
[8]
[PDF] Mechanical Advantage and Efficiency of Pulley Systems
Block and tackle systems have a benefit (even with friction) because they increase mechanical advantage, meaning that a smaller fall weight is needed to lift.Missing: definition | Show results with:definition
[9]
Chapter 2. Mechanisms and Simple Machines
Pulleys can also be arranged as a block and tackle. 2.4 Lever. 2.5 Wheel and Axle. 2.6 Wedge. 2.7 Efficiency of Machines. In working out the problems on levers ...
[10]
[PDF] Mechanical Advantage Systems 1 - Frostburg State University
Although the block and tackle receives a minor role, it should be given more consideration as an external hauling system, particularly in search and rescue ...Missing: applications | Show results with:applications
[11]
None
### Definition and Basic Operation of Block-and-Tackle System
[12]
The Early History of the Pulleys and Crane Systems - ResearchGate
Nov 18, 2022 · This paper mainly focuses on the various interesting applications of pulleys and cranes in ancient and medieval times.
[13]
Portsmouth Block Mills - Graces Guide
Jan 13, 2024 · The Portsmouth Block Mills, built during the Napoleonic Wars, supplied the Royal Navy with pulley blocks and were a key site of the Industrial ...
[14]
[PDF] A Short History of Wire Rope - Roland Verreet
At the beginning of the 19th century hemp ropes and iron chains were used as means of hoisting in the mining industry. Hemp ropes were expensive to import and ...
[15]
Block's parts - Masting, rigging and sails - Model Ship World™
Jun 30, 2019 · Metal sheaves were used only on really heavy tackle, as that for anchors until well into the 19th century. Metals sheaves became then more ...
[16]
FM 55-17 Chapter 6 Block and Tackle, Wire Rope, and Marlinespike ...
Place two triple-sheave blocks 3 feet apart, with the hooks or straps facing outboard, positioning the blocks so one is face down and the other is cheek down.
[17]
Lifting & Rigging Gear at Holloway | Chain Slings, Wire Rope Slings, Hoists, & More. Shop Now!
### Summary of Blocks and Sheaves in Block and Tackle Systems
[18]
RIGGING BLOCKS - The Shipwreck Centre & Maritime Museum
Mar 31, 2025 · Rigging Blocks are essential items on any vessel where heavy or otherwise inaccessible items need moving or adjusting, such as sails and cannons.
[19]
[PDF] TACKLE BLOCK WARNING, USE & MAINTENANCE INFORMATION
Start reeving with the becket or dead end of the rope. Use a shackle block as the upper one of a pair and a hook block as the lower one as seen below. Sheaves ...<|control11|><|separator|>
[20]
Cordage: its origins, construction, properties and uses in ships
Tackle: Typically in 'block and tackle' (pictured). A single rope rove through a 'pulley' block, or blocks, and used to work heavy loads such as yards ...
[21]
[PDF] Rigging for Trail Work - USDA Forest Service
Block and tackle—The term most often used for wooden blocks with a fiber rope, although lighter weight metal block and tackle systems designed for high ...
[22]
https://www.usnetting.com/rope/selection-guide/
[23]
Polyester vs Nylon Rope: Which Is Best for Your Application?
May 2, 2025 · In this guide, we'll compare the key differences between our polyester and nylon rope products offered by Erin Rope Corporation.Missing: modern | Show results with:modern
[24]
Wire Rope Technical Information - Mazzella Companies
It is important to note that wire ropes do not possess a well defined Young's Modulus of Elasticity, but an 'apparent' Modulus of Elasticity ...
[25]
Guide to Choosing the Right Rope for Rescue Operations
Feb 15, 2024 · Static Rope: Offers minimal stretch (up to 6% at 10% Minimum Breaking Strength [MBS]). · Low-Stretch Rope: Provides moderate stretch (6-10% at 10 ...Kernmantle Rope: The... · Rope Materials: Strengths... · Specialized Rope Ratings
[26]
Analyzing a Rope System: Theoretical vs. Actual Mechanical ...
Dec 21, 2022 · A softer, more pliable rope tends to be more efficient than a stiff rope. Tests have indicated that the difference in pulley efficiency can be ...
[27]
Wire Rope End Terminations: Sockets, Wire Rope Clips, and Splices
In this article, we walk you through the different types of fittings and splices used to terminate the end of a wire rope cable or sling ...
[28]
Seizing Wire Rope | Assembly Specialty Products
Method No. 1: Place one end of the seizing wire in the valley between two strands. Then turn its long end at right angles to the rope and closely and tightly ...
[29]
Wire Rope Maintenance – Best Practices for Safety & Longevity
Oct 11, 2025 · Wire rope maintenance involves periodic inspection, cleaning, lubrication, and replacement of wire ropes used in cranes, hoists, and other ...Missing: tackle | Show results with:tackle
[30]
Maintenance & Care of Block & Tackle Pulleys
Keep wire rope well lubricated and check for fraying. Corrosion of wire strands internally or externally can drastically affect the strength of wire rope. When ...
[31]
How a Block and Tackle Works - Science | HowStuffWorks
A block and tackle is an arrangement of rope and pulleys that allows you to trade force for distance.Missing: fixed | Show results with:fixed
[32]
Pulleys and Mechanical Advantage Systems | CMC PRO
May 17, 2022 · Compound pulley systems are created when a simple pulley system is pulling on another simple pulley system. By adding a 2:1 mechanical ...Missing: engineering | Show results with:engineering
[33]
Block and Tackle Pulley System | Options and Modeling
### Summary of Block and Tackle Pulley System Configurations
[34]
[PDF] Untitled
• Gun Tackle: 2. • Luff Tackle: 3. • Double Tackle: 4. • Gyn Tackle: 5. • Threefold purchase: 6. Page 110. TECHNOLOGIES_________________. WT.
[35]
[PDF] 'Mias: io-381 - GovInfo
Gyn tackle.—A purchase consisting of a double and a three sheave block, the standing part of the fall being fast to the double block. Half hitch.—A turn ...
[36]
What is a Snatch Block?
### Summary of Snatch Blocks
[37]
Pulleys – L.R. Ingersoll Wonders of Physics Museum
Pulleys are mechanisms compost by wheel and rope used to lift heavy objects onto tall heights. They change the direction of an applied force.Missing: definition | Show results with:definition
[38]
Powerful Pulleys - Lesson - TeachEngineering
Oct 9, 2024 · A block and tackle is an example of a pulley system that can be attached to anything. It may take a lot of cable or rope, but a human using ...
[39]
[PDF] Work and Energy
The mechanical advantage of a simple machine is the ratio of the output force to the input force. • For this pulley the mechanical advantage is 2. • The work ...
[40]
Mechanical advantage | Nautical Science Grade 11
Oct 23, 2020 · A tackle is roved to advantage when the hauling ... Also, since it is rove to advantage, it has five parts of rope at the moving block.
[41]
Purchases and tackles | Nautical Science Grade 11
Oct 23, 2020 · A tackle is a purchase consisting of a rope rove and through two or more blocks, in such a way that any pull applied to the hauling part, is increased by an ...
[42]
Purchase & Tackles | 4th Gillingham Sea Scouts
The blocks of a tackle are termed the standing block and moving block; the rope rove through them is called the fall, which has its standing, running and ...
[43]
Block and tackle - understanding mechanical advantage on sailing ...
Nov 23, 2023 · A block and tackle or 'purchase' system is a form of mechanical advantage, where the input force is multiplied through a series of pulleys or blocks to create ...
[44]
None
Below is a merged summary of all provided segments on **Friction, Efficiency in Pulley Systems, and Block and Tackle**. To retain all details in a dense and organized format, I’ve used tables in CSV-style text blocks where appropriate, followed by narrative summaries for additional context. This ensures comprehensive coverage while maintaining clarity and structure.
[45]
Pulleys - The Engineering ToolBox
General Equation for Blocks and Tackles. The general effort force equation for a block or tackle to raise or pull a load can be expressed as. S = F / (μ n).
[46]
Belt Friction - Mechanics Map
The belt friction keeps the pulley from slipping relative to the belt. This allows us to use belts to transfer forces from one pulley to another pulley.Missing: block tackle
[47]
Block & Tackle Rigging with Snatch Blocks - ITI
Oct 29, 2010 · Block and tackle rigging and skidding loads via winch and snatch blocks are tried and true rigging systems which are still actively used in underground mining.
[48]
[PDF] SNATCH BLOCKS | The Crosby Group
A single sheave block used to change load line direction can be subjected to total loads greatly different from the weight being lifted or pulled. The total ...
[49]
https://www.upffront.com/blog/guides-4/best-sailing-snatch-blocks-of-2025-331
[50]
https://www.hhilifting.com/en/product-category/hardware/wire-rope-cable-strand-terminations/wire-rope-clips
[51]
https://www.fisheriessupply.com/sailboat-parts/fairleads-and-deck-organizers
[52]
Practical Sailor Reviews Snatch Blocks from Six Makers
The snatch block was developed to be installed and removed from the mid-region of a working line, and it has been loved and cursed by racers and cruisers ...<|separator|>
[53]
[PDF] Hoisting and Rigging Safety Manual - IHSA
Make sure that fibre rope used with tackle is the right size for the sheaves. Sheaves should have diameters at least six – preferably ten – times greater than ...
[54]
Innovations in Crane Technology | CMCO
Modern crane systems now employ a wide range of intelligent systems and sensors to improve safety, uptime, and productivity. Automation technology allows you to ...Missing: tackle | Show results with:tackle
[55]
The Main Components of the Drilling Rig Lifting System
The hoisting system of the drilling rig is composed of drawworks, derricks, cranes, traveling blocks, hooks and wire ropes.Missing: implementations | Show results with:implementations
[56]
https://www.portablewinch.com/collections/pulleys
[57]
https://www.treestuff.com/rigging/blocks-pulleys/
[58]
CMC Equipment & Training | Rope Rescue, Access, SAR, Height
SQUID is an innovative solution for twin tension rope systems (TTRS) and load-sharing applications. See Details. Add to Cart. Compare. $49. NEW!
[59]
Block and Tackle Pulley Systems Athletic Examples Photos
Examples Photos of block & tackle pulley systems for athletic, football netting, gym equipment, camera wiring, basketball backboards; sheaves; hoist.
[60]
Ropes Used in Construction - Seaco Industries
Nylon, polyester, manila, synthetic fiber, and polypropylene are common synthetic materials used to make rope. Each material has its own advantages. Different ...
[61]
https://e-rigging.com/blogs/product-feature/henry-block-pulley-sheaves
[62]
Electric Block and Tackle Hoist - Heavy-Duty Lifting Solutions
4.3 332 Discover electric block and tackle hoists with 3-phase motors, CE certification, and durable chain/wire rope options for industrial lifting tasks.
[63]
https://www.osha.gov/laws-regs/regulations/standardnumber/1919/1919.21
[64]
Block & Tackle Pulley Systems for Transportation Use
Examples of block & tackle pulley systems for aircraft & airport applications, automobile lifts, hanger doors, locomotive washing tunnels, vehicle hard top ...