Cyclodextrins are cyclic oligosaccharides produced from starch by enzymatic degradation, consisting of six or more D-glucopyranose units linked by α-(1,4) glycosidic bonds, which form a toroidalmolecule with a hydrophobic inner cavity and hydrophilic outer surface.[1]
This unique structure enables cyclodextrins to form host-guest inclusion complexes, encapsulating hydrophobic molecules to improve their solubility, stability, and bioavailability.[1]
First discovered in 1891 by Antoine Villiers during the bacterial digestion of potato starch, cyclodextrins were isolated as crystalline products and later characterized by Franz Schardinger, who identified alpha- and beta-forms using Bacillus amylobacter enzymes.[1]
The most common natural variants—α-cyclodextrin (six glucose units), β-cyclodextrin (seven units), and γ-cyclodextrin (eight units)—differ in cavity size, affecting their complexation capacity and solubility; β-cyclodextrin, for instance, has limited aqueous solubility but forms stable complexes with many pharmaceuticals.[1]
In pharmaceuticals, cyclodextrins serve as excipients to enhance the delivery of poorly soluble drugs via oral, parenteral, and topical routes, reducing irritation and masking bitterness.[2]
Beyond medicine, they find applications in food processing for flavor stabilization and cholesterol reduction, as well as in cosmetics and environmental remediation for pollutant sequestration.[3]
Chemical Structure and Properties
Molecular Architecture
Cyclodextrins are cyclic oligosaccharides composed of α-D-glucopyranose units linked by α-(1→4) glycosidic bonds, forming a closed ring.[4] The native forms include α-cyclodextrin (six glucose units), β-cyclodextrin (seven units), and γ-cyclodextrin (eight units).[5] This ring structure adopts a macrocyclic configuration where each glucose residue assumes the ⁴C₁ chair conformation.[6]The overall architecture resembles a truncated cone or toroid, with a wider secondary hydroxyl face (C2 and C3 positions) and a narrower primary hydroxyl face (C6 positions).[1] The exterior surface is hydrophilic, featuring hydroxyl groups that enable hydrogen bonding with water, while the internal cavity is hydrophobic, lined primarily by the skeletal carbon and hydrogen atoms along with the glycosidic oxygen bridges.[7][8] This apolar cavity, approximately 4.7–5.3 Å (α-CD), 6.0–6.5 Å (β-CD), and 7.5–8.3 Å (γ-CD) in diameter, facilitates host-guest inclusion complexes with suitably sized hydrophobic molecules.[8]Intramolecular hydrogen bonding between the secondary hydroxyl groups on one side stabilizes the rigid structure, contributing to the slight bending of the ring and the conical asymmetry.[6] The primary hydroxyl groups project outward, enhancing solubility, whereas the cavity's electron-rich environment from glycosidic oxygens influences selectivity in complexation.[7] These features underpin cyclodextrins' utility in molecular recognition and encapsulation.[9]
Physical and Chemical Characteristics
Cyclodextrins are obtained as white to off-white crystalline powders that are odorless and possess a mildly sweet taste.[10] They exhibit low solubility in organic solvents such as ethanol, methanol, and acetone, but varying degrees of aqueous solubility depending on the specific type, with β-cyclodextrin showing the lowest due to extensive intramolecular hydrogen bonding among its secondary hydroxyl groups.[11] Thermally, native cyclodextrins demonstrate high stability, decomposing without melting at temperatures exceeding 250–300 °C; for instance, β-cyclodextrin decomposes below 260 °C under conventional heating, while α- and γ-cyclodextrins require higher temperatures approaching 300 °C or more.[12]The chemical stability of cyclodextrins is pronounced in neutral and alkaline environments, with reported pKa values ranging from 12.1 to 13.5, rendering them resistant to degradation at physiological pH levels.[13] In contrast, exposure to strong acidic conditions (low pH) promotes protonation of the glycosidic oxygen atoms, increasing susceptibility to hydrolytic cleavage of the α-1,4-glycosidic bonds, particularly at elevated temperatures.[13] This pH- and temperature-dependent stability influences their formulation applications, as complex stability constants for inclusion compounds decrease under acidic or high-temperature conditions.[14]A defining chemical characteristic is the formation of inclusion complexes, enabled by the toroidal molecular architecture featuring a hydrophobic internal cavity lined with C-H bonds and glucosidic oxygens, contrasted by a hydrophilic exterior rich in hydroxyl groups.[1] Guest molecules, typically hydrophobic or poorly water-soluble compounds, are accommodated within the cavity through non-covalent interactions, including van der Waals forces, hydrophobic effects from water displacement, and occasionally hydrogen bonding or electrostatic contributions.[15] This complexation enhances the aqueous solubility, chemical stability, and bioavailability of the guest while masking odors or tastes, without altering the cyclodextrin's inherent properties.[1]The primary native cyclodextrins—α (6 glucose units), β (7 units), and γ (8 units)—differ in cavity size, molecular weight, and solubility, as summarized below:
These variations arise from ring size: the smaller α-cavity limits guest accommodation to smaller molecules, while the larger γ-cavity accommodates bulkier guests, influencing complexation efficiency and selectivity.[16][17][11]
Types and Derivatives
Native Cyclodextrins
Native cyclodextrins are the unmodified cyclic oligosaccharides α-cyclodextrin (α-CD), β-cyclodextrin (β-CD), and γ-cyclodextrin (γ-CD), composed of six, seven, and eight α-D-glucopyranose units, respectively, linked by α-(1→4) glycosidic bonds.[13] These structures form a truncated cone-shaped torus with a hydrophobic cavity lined by the C3-H, C5-H, and C6-H groups and a hydrophilic exterior due to the hydroxyl groups on the primary and secondary faces.[18] The cavity depth is approximately 7.9 Å across all three, enabling host-guest inclusion complexes with non-polar molecules of compatible size.[13]The primary differences among native cyclodextrins arise from their cavity dimensions and solubility profiles, which influence their complexation capacities. α-CD accommodates smaller guests, β-CD mid-sized ones like many pharmaceuticals, and γ-CD larger molecules.[19] β-CD exhibits notably lower watersolubility due to intramolecular hydrogenbonding in its crystal structure, which hinders dissolution, whereas α-CD and γ-CD form less stable lattices, enhancing their solubility.[18]
Property
α-Cyclodextrin
β-Cyclodextrin
γ-Cyclodextrin
Glucose units
6
7
8
Molecular weight (g/mol)
972.9
1135.0
1297.1
Cavity diameter (Å)
4.7–5.3
6.0–6.5
7.5–8.3
Aqueous solubility (g/L at 25°C)
145
18.5
232
[19][18][13]Native cyclodextrins demonstrate high thermal stability, with decomposition temperatures above 250°C, and chemical stability in neutral to mildly alkaline conditions, though they hydrolyze under acidic or enzymatic catalysis.[13] Their biocompatibility and low toxicity stem from their derivation from starch, making them suitable for diverse applications, though β-CD's limited solubility often necessitates derivatization for enhanced utility.[18]
Chemically Modified Derivatives
Chemically modified cyclodextrins are obtained by substituting hydroxyl groups on the native cyclic oligosaccharide structures, primarily at the 2-, 3-, and 6-positions, to overcome limitations such as low aqueous solubility (e.g., β-cyclodextrin solubility of 18.5 mg/mL at 25°C) and potential toxicity in parenteral applications.[20] These modifications, including etherification and sulfation, enhance water solubility, stability against hydrolysis, and inclusion complexation capacity while altering pharmacokinetic properties like renal clearance.[21] For instance, substitution degrees (DS) typically range from 0.6 to 7 per glucose unit, with higher DS correlating to increased solubility but potentially reduced cavity accessibility for guest molecules.[20]Hydroxypropyl-β-cyclodextrin (HPβCD) is produced via alkylation of β-cyclodextrin with propylene oxide under alkaline conditions, yielding an amorphous derivative with an average DS of 0.8–1.0 hydroxypropyl groups per glucose unit, resulting in solubility exceeding 600 mg/mL.[22] This modification disrupts the crystalline lattice of native β-cyclodextrin, improving dissolution rates and enabling complexation with poorly soluble drugs like itraconazole, where phase-solubility studies show linear increases in drug solubility proportional to HPβCD concentration.[23] HPβCD exhibits low toxicity (LD50 >5 g/kg orally in rats) and is approved for oral, topical, and parenteral use, though its solubilizing efficiency decreases with higher DS due to steric hindrance in the hydrophobic cavity.[24]Sulfobutylether-β-cyclodextrin (SBEβCD), commercially known as Captisol, features an average of 6–7 sulfobutyl groups (-CH2CH2CH2CH2SO3Na) per cyclodextrin molecule, introduced through reaction with 1,4-butane sultone, conferring anionic character and solubility over 500 mg/mL (more than 50-fold that of β-cyclodextrin).[25] The negatively charged sulfonate groups enhance electrostatic repulsion for improved stability and reduce hemolysis compared to native forms, making it suitable for intravenous formulations like voriconazole injections, where it increases drug loading without precipitation.[26]Nuclear magnetic resonance (NMR) analysis confirms substitution predominantly at the 6-position, optimizing cavity integrity for inclusion while minimizing immunogenicity.[27]Methylated β-cyclodextrins, such as randomly methylated β-cyclodextrin (RMβCD) with ~1.7–2.0 methyl groups per glucose, are synthesized by treating β-cyclodextrin with methyl iodide or dimethyl sulfate under basic conditions, achieving solubilities up to 600 mg/mL and strong complexation due to reduced hydrogen bonding.[21] These derivatives excel in solubilizing lipophilic compounds via van der Waals interactions in the apolar interior but pose risks for parenteral use owing to membrane disruption (e.g., higher cytotoxicity than HPβCD in cell assays), limiting them primarily to oral and topical applications like enhancing bioavailability of piroxicam.[28] Permethylated variants (heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin) further amplify lipophilicity, aiding chiral separations in chromatography.[29]Other derivatives include amino-substituted and quaternary ammonium cyclodextrins for cationic properties, though less common due to synthetic complexity and potential instability; these are explored for targeted delivery but lack widespread regulatory approval.[30] Overall, modifications are tailored via regioselective protection (e.g., using tosyl groups for 6-position specificity), with analytical techniques like mass spectrometry and NMR verifying DS and substitution patterns to ensure reproducibility.[31]
Cyclodextrins are produced industrially from starch through enzymatic cyclization catalyzed by cyclodextrin glucanotransferase (CGTase), a bacterial enzyme that performs intramolecular transglycosylation on linear α-1,4-glucan chains to form cyclic oligosaccharides.[32] This process exploits the enzyme's specificity for generating rings of 6 to 8 glucose units, corresponding to α-, β-, and γ-cyclodextrins, respectively.[33] CGTase is typically derived from mesophilic or thermophilic Bacillus species, such as Bacillus circulans for β-cyclodextrin production or Bacillus stearothermophilus for broader cyclodextrin mixtures.[34]The production begins with starch gelatinization in water at temperatures around 90–105°C to disrupt granular structure, followed by liquefaction using thermostable α-amylase to hydrolyze starch into maltodextrins and reduce viscosity, yielding a substrate of short to medium-length glucan chains optimal for CGTase action.[35] CGTase is then added at concentrations of 0.5–2% relative to starch dry weight, with reactions conducted at 50–70°C and pH 5.5–7.0 for 24–72 hours, depending on enzyme stability and desired cyclodextrin type.[36] The enzyme's cyclization mechanism involves cleavage of an α-1,4-glycosidic bond and reformation into a cyclic structure, minimizing hydrolysis and favoring ring closure over linear products.[37]Yields vary by process optimization; conventional batch methods achieve 20–40% conversion of starch dry weight to cyclodextrins, with β-cyclodextrin often predominant (up to 60% of total CDs) using selective CGTases, though mixtures require downstream separation.[34] Advanced approaches, such as continuous bioreactor systems or biofilm-immobilized CGTase, enhance productivity to over 100 g/L cyclodextrin while recycling enzymes, reducing costs in large-scale operations.[38]Alternative raw starches, like corn or jackfruit seed, can be used without pretreatment in attrition-enhanced reactors, improving efficiency by direct mechanical disruption during enzymatic action.[39] Purification typically follows via precipitation with organic solvents or selective adsorption, but enzymatic selectivity during production minimizes linear dextrin byproducts.[36]
Post-Synthesis Modifications
Post-synthesis modifications of cyclodextrins entail chemical derivatization of enzymatically produced native forms (α-, β-, and γ-cyclodextrins) to address limitations such as the low aqueous solubility of β-cyclodextrin (18.5 g/L at 25 °C), which restricts its utility in pharmaceutical and industrial applications.[40] These modifications primarily target the hydroxyl groups at C-2 and C-3 (secondary rim) and C-6 (primary rim), introducing substituents via etherification, esterification, or other reactions to enhance solubility, stability, and guest inclusion capacity.[30] Derivatization often yields amorphous products with degrees of substitution (DS) ranging from 0.5 to 10, controlled by reactant ratios, temperature, and base catalysis (e.g., NaOH or NaH).[21]Etherification techniques dominate industrial processes, including alkylation with alkyl halides or dimethyl sulfate under anhydrous conditions for methylated derivatives like randomly methylated β-cyclodextrin (RAMEB), which exhibits solubility >200 g/L.[40] Hydroxyalkylation involves epoxide ring-opening, as in the synthesis of 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) by reacting β-CD with propylene oxide in alkaline aqueous media at 40–60 °C for 4–8 hours, producing a mixture of positional and substitution isomers with DS typically 4–8 and solubility up to 600 g/L.[21] Anionic derivatives, such as sulfobutylether-β-cyclodextrin (SBE-β-CD), are formed via nucleophilic attack on 1,4-butanesultone in basic media, achieving DS of 6–7 sulfobutyl groups and solubilities exceeding 500 g/L, approved by the FDA for parenteral use since 2001.[30]Selective modifications enable precise functionalization, often requiring multi-step protection-deprotection sequences; for example, primary C-6 hydroxyls are tritylated, allowing secondary rim reactions before detritylation with acid.[40] Esterification with acid chlorides or anhydrides yields acyl derivatives, while oxidation (e.g., with TEMPO) targets primary alcohols to aldehydes or carboxylic acids.[30] Emerging solvent-free mechanochemical methods, using ball milling with bases and reagents, reduce environmental impact and improve yields for hydroxyalkyl and amino derivatives, as demonstrated in 2021 studies achieving DS comparable to conventional routes without high-boiling solvents.[41] These techniques underpin over 100 commercial CD derivatives, with hydroxypropyl and sulfobutyl variants comprising the majority in drug formulations.[21]
Historical Development
Early Discovery
Antoine Villiers, a French pharmacist and chemist, first isolated a crystalline substance from the enzymatic degradation of potato starch by Bacillus amylobacter in 1891, during experiments on carbohydrate reduction under ferment action.[42] This product, obtained in low yield—approximately 3 grams from 1 kilogram of starch—was termed "cellulosine" and represented the initial observation of what later proved to be cyclodextrins, though its structure and properties remained unidentified at the time.[43][44]In 1903, Austrian biochemist Franz Schardinger advanced this finding by systematically studying starch degradation by thermophilic bacteria, such as Bacillus macerans, which produced dextrinizing enzymes.[42] Schardinger isolated two distinct crystalline dextrins from these digests between 1903 and 1911, demonstrating their ability to form crystalline complexes with iodine, calcium iodide, and other compounds—properties that distinguished them from linear dextrins.[45] These isolates corresponded to α-cyclodextrin (six glucose units) and β-cyclodextrin (seven glucose units), though their cyclic oligosaccharide nature was not elucidated until later crystallographic studies in the 1930s.[42] Schardinger's enzymatic production method and complexation observations established the foundational chemistry of cyclodextrins, earning him recognition as a pioneer despite initial interest limited to bacterial metabolism rather than practical applications.[46]Early investigations from 1891 to the mid-1910s focused primarily on production yields and basic solubility behaviors, with yields remaining low (under 1% of starch weight) due to inefficient bacterial processes.[43] Researchers like Pringsheim explored halogen complexes in the 1920s, confirming unique binding capacities, but structural confirmation awaited X-raydiffraction analyses by Freudenberg and others in 1935, revealing the toroidal, hydrophobic cavity enabling host-guest inclusion.[44] These discoveries occurred amid broader starch enzymology studies, with cyclodextrins initially viewed as microbial byproducts rather than versatile molecules.[42]
Commercialization and Scaling
Commercial production of cyclodextrins commenced in the mid-1970s, driven by refinements in enzymatic processes utilizing cyclodextrin glycosyltransferase (CGTase) derived from Bacillus species to convert starch into cyclic oligosaccharides.[47] Pilot-scale efforts in Japan began around 1960, primarily targeting β-cyclodextrin for initial applications, though limited by low yields and high purification costs that restricted output to small quantities suitable only for research.[48] By the late 1970s, multiple manufacturers initiated industrial-scale operations, marking the transition from laboratory synthesis to viable commodity production.[43]Scaling accelerated in the mid-1980s through process optimizations, including improved CGTase specificity, starchliquefaction techniques, and downstream separation methods like chromatography and crystallization, which reduced production costs to 10-15 USD per kilogram and enabled output in large quantities.[49] These advancements addressed key bottlenecks such as enzyme instability at high temperatures, variable cyclodextrin ratios (favoring β over α or γ forms), and energy-intensive purification, with annual global production rising from hundreds to several thousand tons by the 1990s.[50] Leading producers, including Wacker Chemie AG (marketing under CAVAMAX) and Roquette Frères, invested in dedicated facilities to supply native and modified variants for pharmaceutical and food sectors.[51]Further enhancements in the 1990s and 2000s involved recombinant CGTase expression in hosts like Bacillus subtilis for higher activity, alongside innovations such as ultrafiltration for enzyme reuse and immobilized biocatalysts, which minimized waste and boosted conversion efficiencies beyond 70% in optimized systems.[52][38] For γ-cyclodextrin, which poses greater challenges due to high solubility and lower enzymatic preference, specialized strains and surface-displayed enzymes have facilitated economical isolation, though it remains costlier than β-forms.[53] These developments have sustained market growth, with current global capacity supporting a cyclodextrin industry valued at approximately 300 million USD annually, underscoring the causal link between biotechnological refinements and expanded commercial viability.[54]
Applications
Pharmaceutical and Drug Delivery Uses
Cyclodextrins serve as pharmaceutical excipients primarily to enhance the aqueous solubility, chemical stability, and bioavailability of poorly soluble drugs by forming non-covalent inclusion complexes, where the lipophilic drugmolecule is encapsulated within the hydrophobic cavity of the cyclodextrin torus.[55] This host-guest interaction, driven by van der Waals forces and hydrogen bonding, has enabled their incorporation into diverse dosage forms, including oral tablets, injectables, and ophthalmic solutions, with beta-cyclodextrin derivatives like hydroxypropyl-beta-cyclodextrin (HPβCD) being most prevalent due to superior solubility and reduced toxicity compared to native beta-cyclodextrin.[56][57]In parenteral formulations, sulfobutylether-beta-cyclodextrin (SBE-β-CD, marketed as Captisol) is FDA-approved for use in intravenous products, such as remdesivir (Veklury) for COVID-19 treatment and carfilzomib (Kyprolis) for multiple myeloma, where it solubilizes the active ingredient while maintaining low nephrotoxicity at doses up to 2 g per administration.[58] HPβCD, similarly approved for parenteral, oral, and topical routes in the US and Europe, appears in products like itraconazole oral solution (Sporanox) to boost antifungalbioavailability from less than 55% to over 90% in complexed form.[59][60]Sugammadex, a modified gamma-cyclodextrin, encapsulates rocuronium to reverse neuromuscular blockade, with FDA approval in 2015 demonstrating rapid onset (under 2 minutes) and efficacy in over 95% of cases during anesthesia recovery.[61]For advanced drug delivery, cyclodextrins facilitate targeted systems such as nanoparticles and hydrogels; for instance, cross-linked beta-cyclodextrin nanoparticles have shown promise in vitro for anticancer drug loading, achieving controlled release via pH-sensitive degradation and up to 80% encapsulation efficiency for doxorubicin.[62] In ocular delivery, HPβCD complexes with pilocarpine increase corneal penetration by 2-3 fold, reducing dosing frequency in glaucoma treatments.[60] Oral applications include taste-masking for bitter APIs like ibuprofen, where cyclodextrin inclusion reduces perceived bitterness by over 70% in pediatric formulations without altering dissolution profiles.[63]Regulatory bodies recognize alpha-, beta-, and gamma-cyclodextrins as generally regarded as safe (GRAS) for pharmaceutical excipients, with derivatives like HPβCD limited to specific routes due to potential renal accumulation at high doses exceeding 16 g/day, though clinical data confirm safety in approved products with no significant ototoxicity or hemolysis.[64][61] Ongoing trials explore HPβCD as a therapeutic agent itself for Niemann-Pick type C disease by depleting lysosomal cholesterol, with phase 3 data from 2022 showing slowed progression in pediatric patients at 2,000 mg/kg weekly infusions.[2]
Food Industry and Nutraceutical Applications
Cyclodextrins (CDs), particularly α-, β-, and γ-CDs, serve as versatile excipients in the food industry by forming host-guest inclusion complexes that encapsulate hydrophobic molecules, thereby enhancing their aqueous solubility, chemical stability, and controlled release.[3] This mechanism relies on the CDs' toroidalstructure, where the hydrophobic interior cavity traps guest molecules via non-covalent interactions, protecting them from oxidation, light, and heat degradation.[3] In practice, β-CD is commonly used for flavor retention, achieving up to 79% preservation of eugenol odor during extrusion processing at concentrations of 1-4%.[3] Similarly, CDs stabilize natural pigments like curcumin and lycopene, preventing color loss in products such as ginger extracts stored at 5°C for up to 4 weeks.[3]Key applications include taste masking and bitterness reduction; for instance, 10% β-CD effectively diminishes the bitterness of milk casein hydrolysates by complexing bitter peptides.[3] CDs also extend shelf life by mitigating lipid oxidation, as demonstrated by β-CD/limonene complexes retaining 40% of limonene after 10 days of exposure to air.[3] In dairy processing, β-CD selectively sequesters cholesterol from milk fat, enabling low-cholesterol butter production without altering sensory attributes.[65] Additionally, CDs remove undesirable contaminants like mycotoxins; 1% β-CD reduces patulin levels by 70% in apple juice via inclusion complexation.[3] Solubility enhancement is evident in vanillin complexes with β-CD, which increase its water dispersibility for uniform flavor distribution in beverages.[3]Regulatory approval supports these uses: α-, β-, and γ-CDs received Generally Recognized as Safe (GRAS) status from the U.S. FDA in 2000, 2001, and 2004, respectively, for food additive applications up to specified levels.[66] In the European Union, β-CD is authorized as E 459 with an acceptable daily intake (ADI) of 5 mg/kg body weight, primarily for stabilizing and solubilizing functions in categories like non-alcoholic beverages and confectionery.[3][67]In nutraceutical formulations, CDs improve the bioavailability and stability of bioactive compounds from natural sources, such as polyphenols and terpenoids, by overcoming their poor water solubility and susceptibility to gastrointestinal degradation.[68] Encapsulation with γ-CD, for example, boosts coenzyme Q10 absorption by 18-fold in oral supplements through enhanced mucosal permeability.[68] Curcumin-β-CD complexes demonstrate increased solubility and anti-inflammatory efficacy in vitro, while resveratrol inclusion with hydroxypropyl-β-CD extends antioxidant activity in fortified foods like juices.[68] Empirical data from in vivo studies show CDs protecting lutein from pumpkin against oxidation, yielding microcapsules with improved photostability and bioavailability in rodent models.[69] These applications align with GRAS designations, facilitating CDs' integration into dietary supplements for targeted delivery of compounds like thymoquinone and flavonoids.[68][70]
Analytical and Industrial Techniques
Cyclodextrins serve as versatile agents in analytical chemistry due to their ability to form host-guest inclusion complexes, facilitating selective molecular recognition, separation, and detection of analytes. In chromatographic techniques, cyclodextrin derivatives are incorporated into stationary phases or added to mobile phases to achieve high-resolution enantiomeric separations; for instance, β-cyclodextrin-bonded columns enable the resolution of chiral compounds in high-performance liquid chromatography (HPLC) and gas chromatography (GC).[71] Capillary electrophoresis (CE) employs cyclodextrins as chiral selectors, forming diastereomeric complexes that enhance separation efficiency, as demonstrated with analytes like dansyl-phenylalanine, allowing for portable, high-throughput analysis in devices such as the Mars Organic Analyzer.[71]Spectroscopic applications leverage cyclodextrins to modulate analyte microenvironments, improving solubility and signal intensity; this has enabled fluorescence-based detection of mycotoxins at concentrations as low as 25 parts per trillion by stabilizing excited states within the cyclodextrin cavity.[71]Electroanalytical methods utilize cyclodextrin-modified electrodes or sensors for enhanced selectivity in electrochemical detection, supporting applications in single-molecule analysis and environmental monitoring through specific binding interactions.[71] These techniques exploit both inclusion (analyte entering the hydrophobic cavity) and surface interaction modes, particularly in polar organic phases, providing advantages in sensitivity and reduced interference over traditional methods.[71]In industrial processes, cyclodextrins are applied for encapsulation and stabilization in cosmetics, where they form inclusion complexes with volatile fragrances like vanillin or eugenol, extending shelf life and enabling controlled release under thermal or mechanical stress.[72]Textile manufacturing incorporates cyclodextrins via electrostatic adsorption or in situ immobilization to create washable, non-adhesive aromatic nanocapsules on cotton fabrics, achieving sustained fragrance delivery and improved eco-friendliness in flame-retardant formulations.[72] Agricultural techniques use cyclodextrin complexes to encapsulate pesticides such as chloramidophos, enhancing their photostability and targeted release, thereby optimizing efficacy while minimizing off-target environmental exposure.[72] These methods rely on the reversible nature of inclusion complexation, scalable through co-precipitation or kneading processes for bulk production.[72]
Environmental Remediation and Miscellaneous
Cyclodextrins facilitate environmental remediation primarily through host-guest inclusion complex formation, which enhances the solubility and mobility of hydrophobic organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) in contaminated soils and water, enabling their extraction via washing processes or improved bioavailability for biodegradation.[73][74] In aged creosote-polluted soils, solutions of hydroxypropyl-β-cyclodextrin (HP-β-CD) and other derivatives have demonstrated extraction efficiencies for PAHs exceeding those of water alone, with specific studies reporting up to 50-70% removal of low-molecular-weight PAHs under optimized conditions.[75][76] β-Cyclodextrin amendments have also boosted PAH and n-alkane uptake in bioremediation setups using plants like Sedum alfredii, increasing pollutant concentrations in plant tissues by factors of 2-5 compared to controls.[77]Functionalized cyclodextrins, such as those crosslinked or modified with polymers, serve as adsorbents for heavy metals (e.g., lead, cadmium) and pesticides in aqueous environments, achieving adsorption capacities of 100-300 mg/g for certain ions via chelation and complexation, with regeneration possible through pH adjustments or solvent desorption for reuse in multiple cycles.[78][79] Recent advancements include their use against per- and polyfluoroalkyl substances (PFAS), where cyclodextrin-based materials trap these persistent contaminants through hydrophobic cavity interactions, supporting sustainable wastewater treatment.[80] These applications leverage cyclodextrins' biocompatibility and low toxicity, though efficacy depends on derivative type, pollutant hydrophobicity, and matrix complexity, with peer-reviewed trials emphasizing the need for site-specific optimization over generalized deployment.[81]In miscellaneous applications, cyclodextrins are incorporated into textiles for finishing treatments, where β-cyclodextrin grafting onto fabrics enables controlled release of antimicrobials or odor-masking agents via inclusion complexes, improving durability against washing cycles by 20-50% in tested cotton and polyester substrates.[82][83] In cosmetics, they stabilize volatile fragrance compounds and active ingredients like retinoids by encapsulation, reducing evaporation losses by up to 80% and enhancing shelf-life in formulations such as creams and deodorants, as evidenced by phase solubility and DSC analyses confirming complex formation.[84] Agricultural uses include pesticide formulation enhancements, where cyclodextrins improve storage stability and targeted delivery, minimizing environmental leaching while maintaining efficacy against target pests.[85] These non-core applications highlight cyclodextrins' versatility in material science, though scalability remains constrained by production costs relative to synthetic alternatives.
Safety, Toxicology, and Regulatory Status
Human Health and Toxicity Data
Native α-, β-, and γ-cyclodextrins are classified as generally recognized as safe (GRAS) by the U.S. Food and Drug Administration (FDA) for oral use in food and pharmaceuticals, owing to their negligible systemic absorption following ingestion, with over 90% excreted unchanged in feces within 24 hours.[61][86] Acute oral toxicity studies in rodents report LD50 values exceeding 10 g/kg body weight, indicating low acute risk, though doses above 1000 mg/kg/day may induce reversible diarrhea and cecal enlargement due to osmotic effects in the gut.[64][87]Parenteral administration of unmodified β-cyclodextrin exhibits nephrotoxicity, characterized by renal tubular vacuolization and crystal formation in preclinical models, attributed to its low water solubility and accumulation in proximal tubules; this limits its intravenous use in humans, with solubility constraints preventing safe dosing above 0.1 mg/kg.[88][89] In contrast, derivatives such as 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) demonstrate improved renal safety, with clinical trials for Niemann-Pick disease type C1 (NPC1) administering intravenous doses up to 2500 mg/m² weekly for up to 48 weeks, reporting primarily mild to moderate infusion-related reactions like fatigue and headache, without significant nephrotoxicity in patients without pre-existing renal impairment.[90][91] However, long-term intrathecal HP-β-CD use in NPC1 trials has been associated with progressive sensorineural hearing loss, linked to cochlear hair cell damage via cholesterol depletion mechanisms, prompting dose adjustments and audiometric monitoring in protocols.31465-4/fulltext) [92]Sulfobutylether-β-cyclodextrin (SBECD), used as a solubilizer in formulations like intravenous voriconazole and remdesivir, accumulates in renal impairment but shows no direct causation of acute kidney injury in human pharmacokinetic studies; post-marketing data from over 10,000 patients indicate reversible elevations in serum creatinine at doses up to 16 mg/kg, primarily due to assay interference rather than glomerular filtration decline.[93][94] Certain methylated derivatives, such as heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (TRIMEB), are contraindicated for human parenteral use due to hemolytic potential and renal toxicity observed in animal models and in vitroassays.[61] Overall, human exposure data from approved excipient uses affirm low systemic toxicity for oral and select parenteral forms, with risks primarily route- and derivative-dependent, supported by regulatory approvals from the FDA and European Medicines Agency for specific indications.[95]
Environmental Fate and Impact
Cyclodextrins enter the environment primarily through industrial effluents, wastewater from pharmaceutical and food processing, and agricultural applications involving remediation or pesticide formulations. Due to their high watersolubility and cyclic structure, they exhibit limited volatility and sorption to sediments, facilitating mobility in aqueous systems but also promoting microbial accessibility for degradation.[79]In soil, cyclodextrins demonstrate biodegradability across various types, including α-, β-, and γ-cyclodextrins as well as derivatives like randomly methylated β-cyclodextrin (RAMEB) and hydroxypropyl-β-cyclodextrin (HPβCD). Laboratory and field studies in hydrocarbon-contaminated soils with high organic matter and microbial activity showed depletion of even the more persistent RAMEB to approximately 40% of initial levels over two years under favorable aerobic conditions, indicating half-lives on the order of months to years depending on soil type and microbial density. No evidence supports significant persistence or long-term accumulation in terrestrial compartments, as enzymatic hydrolysis by soilbacteria targets the glycosidic bonds, leading to complete mineralization to glucose and other innocuous products. Aquatic degradation follows similar microbial pathways, though rates may be slower in oligotrophic waters due to lower biomass.[96][97]Ecotoxicological assessments reveal low inherent toxicity, aligning with their use in environmental remediation to encapsulate persistent pollutants without secondary ecological harm. In aquatic systems, chronic exposure of hydroxypropyl-β-cyclodextrin at concentrations up to 1600 µg/L over 145 days in American flagfish (Jordanella floridae) produced no significant effects on adult fecundity, growth, or liver somaticindex, though female gonadosomatic index increased slightly and second-generation larvae exhibited reduced growth and diminished tolerance to copper stress. Dextrin-based nanosponges incorporating cyclodextrins displayed mild toxicity to microalgae (Raphidocelis subcapitata) and cnidarians (Hydra vulgaris) at 1 mg/mL, but negligible impacts on brine shrimp (Artemia franciscana) and terrestrial seedling germination in pumpkin (Cucurbita pepo), confirming ecosafety at environmentally relevant exposure levels. Bioaccumulation potential remains negligible owing to rapid biodegradation, high molecular weight, and hydrophilicity, precluding biomagnification in food webs. Overall, cyclodextrins pose minimal adverse impacts and may mitigate environmental contamination by enhancing pollutant bioavailability for degradation.[98][99][79]
Current Research and Future Directions
Recent Scientific Advances
Recent developments in cyclodextrin research have focused on enhancing drug delivery precision through nanoscale systems and targeted formulations. In 2025, β-cyclodextrin-based multifunctional carriers were advanced for colon-targeted drug delivery, demonstrating improved solubility, controlled release, and reduced systemic toxicity in experimental models by leveraging host-guest interactions to encapsulate hydrophobic therapeutics.[100] Similarly, cyclodextrin-in-liposome hybrids progressed for therapeutic applications, incorporating modified cyclodextrin derivatives with liposomal subtypes to achieve superior encapsulation efficiency and stability, as evidenced by in vitro and preclinical studies showing enhanced bioavailability of entrapped agents.[101]Biomedical material innovations include β-cyclodextrin-driven self-healing hydrogels, reported in August 2025, which exhibit reversible cross-linking via dynamic inclusion complexes, enabling applications in sustained drug release, wound healing, and tissue engineering with demonstrated biocompatibility and mechanical resilience in cellular assays.[102] Cyclodextrins have also been integrated into theragnostic platforms for photothermal therapy, where they stabilize nanoparticles for combined imaging and tumor ablation, with 2024-2025 studies confirming reduced off-target effects and improved photothermal conversion efficiency in murine models.[103]Environmental applications saw a breakthrough in October 2025 with cyclodextrin-embedded nanofiber membranes for sustainable water filtration, achieving approximately 75% removal of triclosan (from 11 mg/L initial concentration) through selective adsorption in lab tests, offering reusability after washing without performance degradation.[104] In gene delivery, cyclodextrin polymers were refined in 2024 projects for non-viral vectors, improving transfection efficiency and safety profiles by mitigating immunogenicity compared to viral alternatives, as validated in cellular and animal studies.[105] These advances build on the 21st International Cyclodextrin Symposium in June 2024, which highlighted ongoing clinical evaluations of cyclodextrin-based formulations for inflammation-related diseases and bioactive metabolite complexes.[106][107]
Potential Innovations and Challenges
Cyclodextrin derivatives are advancing targeted drug delivery through nanosponge architectures, which facilitate stimuli-responsive release of therapeutics such as anticancer agents, improving solubility and site-specific bioavailability in applications like colon cancer treatment.[108] These innovations extend to multifunctional platforms incorporating cyclodextrins with polymers or nanoparticles for enhanced cellular penetration and reduced off-target effects in gene and oligonucleotide therapies.[109] In environmental applications, cyclodextrin-based nanocomposites enable efficient adsorption of heavy metals and organic pollutants from wastewater, achieving removal rates exceeding 90% in some β-cyclodextrin polymer systems due to their hydrophobic cavities and biocompatibility.[110][111]Further innovations include cyclodextrin-metal-organic frameworks for sustained release in agriculture and remediation, leveraging their structural versatility for encapsulating pesticides or nutrients with minimal leaching.[112] Ultrasound-active cyclodextrin nanoparticles show promise for non-invasive imaging and therapy combinations, as demonstrated in synthesis methods enabling acoustic responsiveness.[113]Key challenges encompass potential nephrotoxicity from high-dose or aggregated cyclodextrin polymers, necessitating expanded preclinical and clinical data to validate long-term safety.[31]Scalability remains a barrier, with production costs and reproducibility issues hindering commercialization of complex derivatives, alongside regulatory demands for proving inclusion complex stability under physiological conditions.[114] In nanotechnology contexts, achieving uniform particle sizes and preventing premature guest release during storage or transit poses ongoing formulation hurdles.[115]