Fact-checked by Grok 2 weeks ago

Europlug

The Europlug is a compact, non-rewirable two-pole plug featuring two thin, pins measuring 4 mm in and spaced 19 mm apart on centers, designed primarily for ungrounded, low-power applications. It is unpolarized and rated for a maximum voltage of 250 V and current of 2.5 A, making it suitable for double-insulated (Class II) devices such as chargers, lamps, and small electronics. Standardized under CEE 7/16, the Europlug serves as the de facto non-earthed for such appliances across . The design of the Europlug emphasizes compatibility and safety, with its flexible pins allowing insertion into a range of socket types, including the ungrounded Type C as well as grounded Type E and Type F outlets commonly found in . This versatility stems from the pins' ability to fit into larger 4.8 mm holes without requiring a dedicated socket, though it is not compatible with Type G or other non-round-pin systems. Originating as part of efforts to harmonize European electrical standards in the mid-20th century, the CEE 7 series—including the 7/16 specification—aimed to facilitate cross-border use while prioritizing simplicity and cost-effectiveness in manufacturing. Widely adopted in over 30 European countries, including , , , , and the , the Europlug powers everyday low-current items but is limited to 2.5 A to prevent overheating in sockets. Its prevalence reflects ongoing standardization initiatives by bodies like CENELEC, though it coexists with national variants like the plug, and is absent from the , , , and where Type G dominates. Despite its age, the Europlug remains a cornerstone of European electrical infrastructure due to its reliability for modern portable devices.

Overview

Definition and Purpose

The Europlug is a non-rewirable, two-pole, round-pin (AC) power plug without grounding provisions, officially classified as Type C in the IEC 60083 for plugs and socket-outlets for domestic and similar general use. This design consists of two cylindrical pins intended for connection to ungrounded electrical systems, distinguishing it from earthed plugs used for higher-power or safety-critical applications. Its primary purpose is to provide a safe and standardized means of powering low-current domestic devices in regions with 220–240 V mains voltage, rated for a maximum of 250 V and 2.5 A. It is particularly suited for Class II appliances—double-insulated equipment that relies on reinforced insulation rather than grounding for safety—such as battery chargers, table lamps, and small electronics that draw minimal power. As a harmonized design, the Europlug promotes by fitting into a wide range of continental types, including those compliant with the standard. Its unpolarized configuration, where the pins are identical and interchangeable, combined with a compact flat profile, facilitates easy insertion and removal while minimizing the need for country-specific adapters in much of .

Key Specifications

The Europlug is defined by precise dimensional standards to ensure and in low-power applications. It features two round pins with diameters of 4.0 mm, spaced 19 mm apart at their centers (converging to 17.5 mm at the tips), and pin lengths of 19 mm from the plug body. Pins are fitted with insulating sleeves covering at least 10 mm of their length. The overall plug body measures 35.3 mm in width and 13.7 mm in height, with depth varying by manufacturer but typically not exceeding 20 mm to maintain a compact, flat profile. Electrically, the Europlug is rated for a maximum current of 2.5 A at 250 V AC and frequencies of 50/60 Hz, with insulation capable of withstanding 500 V. Construction adheres to material standards specifying thermoplastic or rubber for the non-conductive insulation components, while the pins are formed from conductive metals such as or similar alloys, often with partial insulating sleeves.

History and Standardization

Origins and Development

The Europlug emerged in the early 1960s as part of broader efforts to harmonize electrical standards across post-World War II Europe, where rapid electrification highlighted the incompatibilities of diverse national plug designs that impeded trade and consumer convenience. Developed through the International Commission on the Rules for the Approval of Electrical Equipment (CEE), the plug addressed the need for a simple, ungrounded connector suitable for low-power appliances compatible with multiple socket types prevalent in . This initiative responded to the fragmentation caused by country-specific systems, aiming to facilitate cross-border use without requiring extensive retooling of existing . The design was first formally specified in May 1963 as Alternative II of Standard Sheet XVI in the second edition of CEE Publication 7, which outlined plugs and socket-outlets for domestic and similar purposes. This specification introduced the Europlug's characteristic two round pins of 4 mm diameter spaced 19 mm apart, with flexible insulating sleeves to enhance and ensure fit in sockets designed for slightly larger pins. The drew directly from the longstanding Type C plug, a two-pin ungrounded design that originated in the early and was widely used since the in countries such as and for general applications, but refined for greater across the continent by reducing pin rigidity and adding protective features. Initial prototypes emphasized compatibility with existing sockets, including those for 16 A ratings, through converging pins that allowed secure insertion despite dimensional variations. By the late , the Europlug gained traction in manufacturing for Class II devices (double-insulated appliances up to 2.5 A), reflecting its role in promoting amid Europe's growing electrical appliance market. Its voluntary adoption accelerated in the , supported by the plug's versatility and the absence of grounding requirements, which minimized production costs compared to earthed alternatives.

Adoption by CENELEC and IEC

The Europlug was formally established as a through CENELEC's EN 50075 in 1990, which specifies flat, non-rewirable two-pole plugs rated at 2.5 A and 250 V for connecting class II equipment in household and similar applications. This standard harmonized national variants across CENELEC member states, building on its earlier description as plug C5 in the 1975 IEC Technical Report 83, and aligned with the evolving IEC 60083 series on plugs and socket-outlets for domestic use. In the 1990s, the Europlug gained further regulatory backing through its integration into the European Union's Directive 73/23/EEC, which set essential safety requirements for electrical equipment operating between 50 V and 1,000 V AC, including plugs like the Europlug defined in EN 50075 to ensure compliance with protection against electric shock and other hazards. This directive, amended multiple times in the 1990s (e.g., by 93/68/EEC for ), mandated that products bearing the Europlug meet harmonized standards for market placement across member states. The framework was later recast as Directive 2014/35/ in 2014, maintaining EN 50075's role in demonstrating conformity for low-power, ungrounded plugs while emphasizing risk-based assessments for safety. On the international front, the Europlug achieved global recognition as Type C in the IEC 60083 standard, a cataloging plugs and socket-outlets worldwide, with its designation solidified in editions from the onward to promote . The 2015 edition of IEC/TR 60083 (seventh edition) included refinements such as updated notes on safety features and country lists, including enhanced details on pin dimensions and insulation to mitigate risks like overheating or insertion errors in compatible sockets, but retained the core Type C specifications unchanged. Enforcement of the Europlug standard became mandatory in most countries by the early , as national regulations aligned with CENELEC and EU directives required compliance for low-voltage appliances, prohibiting non-conforming plugs in class devices to ensure uniform safety. Outside the , adoption remains voluntary but widespread in countries like and , where it is permitted alongside national types for compatibility with European-style outlets, without formal IEC-mandated enforcement. As of November 2025, the core specifications in EN 50075 and IEC 60083 persist without major revisions, reflecting the plug's established stability in global electrical systems.

Design Features

Physical Characteristics

The Europlug features two symmetrical round pins of 4.0 mm diameter, spaced 19 mm center-to-center, with no earth pin, enabling a non-polarized design that allows 180-degree rotation for insertion into compatible sockets. The pins measure 19 mm in length overall, consisting of a 9 mm conductive tip followed by a 10 mm flexible insulated section to ensure secure contact and adaptability to varying socket depths. The insulated sleeves on the pins are mandatory per EN 50075 to prevent if the plug is not fully inserted. Its body adopts a flat profile with hexagonal sides approximately 35.3 mm wide by 13.7 mm high, with chamfered edges that promote smooth insertion and prevent snagging. The rear cord entry is configured for flexible cords typically rated at 0.75 mm² cross-section, such as H03VVH2-F types, supporting the plug's low-power applications. Europlugs commonly use white or transparent insulation for visibility and durability, and include mandatory manufacturer markings, including the EN 50075 compliance , to indicate adherence to and dimensional standards. This design emphasizes compactness and universality across European Type C, E, and F sockets.

Safety and Ergonomic Considerations

The Europlug's ungrounded design is specifically tailored for Class II (double-insulated) electrical devices, where protective earthing is unnecessary due to the inherent double insulation that prevents access to live parts under normal conditions or a single fault. This approach minimizes the risk of electric shock for low-power applications by eliminating the need for a pin, which could otherwise introduce complexity and potential failure points in portable, low-current equipment rated up to 2.5 A at 250 V. However, this design prohibits its use with Class I appliances that require grounding for safety, as the absence of an earth connection could leave faults unmitigated, potentially leading to hazardous conditions if metal casings become live. Insertion safety is enhanced by the plug's rounded pin tips and slightly flexible construction, which facilitate smooth entry into compatible sockets while reducing the likelihood of bending or damage during handling. The two round pins, measuring 4.0 mm in with rounded or conical ends, converge slightly toward their free ends over a 19 mm center distance, allowing self-alignment and reliable contact even in sockets with larger 4.8 mm apertures, such as those in outlets. The flat, non-rewirable body, often molded directly onto the cord, further prevents accidental exposure of live parts during partial insertion, as the insulating housing covers the base and limits accessibility to the pins. Ergonomically, the Europlug's compact dimensions—approximately 35.3 mm wide, 13.7 mm thick, and with 19 mm pins—promote portability and ease of use in consumer applications, making it suitable for travel adapters and low-power devices like chargers and lamps. The hexagonal or rectangular body profile provides a secure without protruding elements, allowing straightforward insertion and removal by end users, including in confined spaces. This prioritizes simplicity and reliability for everyday handling, aligning with its role as a high-volume, non-professional connector. A known concern with the Europlug arises from its smaller pin relative to some host sockets, potentially resulting in a loose fit that could cause intermittent contact and arcing under load, particularly in oversized 16 A outlets. To mitigate this, the incorporates converging, flexible pins that expand slightly upon insertion to ensure adequate pressure and electrical continuity, reducing arcing risks in compatible socket types. While no specific EU-wide revisions were enacted in the , ongoing adherence to EN 50075 ensures manufacturing consistency to address fit variations.

Technical Details

Electrical Ratings

The Europlug is rated for a maximum voltage of 250 V AC and a continuous current of 2.5 A, as specified in the EN 50075 standard for flat non-rewirable two-pole plugs. This rating ensures safe operation for low-power domestic appliances, with the standard applying to class II (double-insulated) equipment. The plug's power handling capacity is up to 625 VA at nominal voltage and current, making it appropriate for devices consuming less than 500 W, particularly when considering typical power factors below unity and voltage drops due to cord impedance over longer lengths (e.g., 1–2 m cords). Performance is maintained through low contact resistance, which minimizes voltage drop and heat generation during use. Testing protocols under EN 50075 verify these ratings through several key assessments. The test applies 2 kV for 1 minute between pins and accessible parts, requiring no or . resistance must exceed 5 MΩ when measured at 500 V for 1 minute. Additionally, the heat rise test under full rated load (2.5 A) limits temperature increase to 45 above ambient for current-carrying parts, conducted at an ambient of 20 ± 5 °C to ensure reliable operation without excessive thermal stress.

Construction and Variants

The Europlug features a standard construction consisting of a molded thermoplastic body, typically made from materials such as (PVC) or (), which provides electrical insulation, mechanical strength, and resistance to environmental factors. The two round pins are constructed from , often with a to enhance corrosion resistance and ensure reliable over time. Integral to its design is the fixed cord integration, where a flexible with a 2x0.75 mm² cross-section is attached, incorporating strain relief at the entry point to the plug body; this prevents wire fatigue and maintains integrity during repeated flexing. The assembly process involves injection molding for the body and precise insertion of the pins, ensuring compliance with EN 50075 dimensions for non-rewirable, flat two-pole plugs rated at 2.5 A and 250 V. Minor variants of the Europlug maintain the core ungrounded, non-polarized design but include adaptations such as colored cable insulation—often in black, white, or gray—for easy identification in multi-device or extension setups. These color options do not alter electrical performance but aid in organization and compliance with installation guidelines. Following the implementation of the EU RoHS Directive in 2006, all Europlugs manufactured for the European market must use compliant materials, restricting hazardous substances like lead and in the thermoplastic body, pins, and cable to minimize environmental impact.

Compatibility

European Socket Types (C, E, F, K)

The Europlug, standardized as CEE 7/16, is engineered for compatibility with the predominant ungrounded and grounded socket types in , including Types , , , and , facilitating its use for low-power appliances without the need for adapters in most settings. Its symmetrical design with two round pins eliminates concerns, as the pins can be inserted in either orientation. This compatibility stems from the plug's dimensions, which align with the standard 19 mm pin spacing and 4.0–4.8 mm hole diameters found in these sockets. Type C sockets, also known as CEE 7/1, are legacy two-pin ungrounded outlets featuring circular holes spaced 19 mm apart, commonly found in older installations in countries such as and . The Europlug achieves a direct and secure fit into these sockets, with its 4 mm diameter pins inserting fully to ensure stable electrical contact rated up to 2.5 A at 250 V. Types E and F sockets, designated as CEE 7/5 () and CEE 7/3 or 7/4 (/German), incorporate side or central earthing mechanisms alongside two 4.8 mm diameter holes spaced 19 mm apart, prevalent in nations like , , , , and much of . The Europlug provides a reliable fit in both earthed and unearthed variants of these sockets, as its 4 mm pins align with the holes to maintain electrical connectivity, though limited to 2.5 A. Type K sockets, standardized under DS 60884-2-D1 in and also used in and the , feature two round pin holes identical to those in Types E and F, combined with flat earth clips for grounding. The Europlug provides a reliable fit into these sockets without grounding connection, allowing use for its rated 2.5 A capacity. Overall, the Europlug's design ensures compatibility with the vast majority of household sockets in and EEA countries, where Types C, E, F, and K collectively dominate installations outside the British-influenced regions, supporting its role as a universal low-current solution across the continent.

British and Commonwealth Types (D, G, BS 4573)

The Europlug demonstrates partial but unsafe compatibility with Type D sockets, prevalent in , parts of , and some South Asian countries. These sockets feature three round holes in a triangular configuration, with the live and neutral holes spaced 19 mm apart to match the Europlug's pin centers; however, the holes are larger at approximately 5 mm in diameter compared to the Europlug's 4 mm pins, resulting in a loose and insecure fit that compromises . Direct insertion bypasses grounding and exposes users to risks from the uninsulated design of Type D systems, including potential arcing, overheating, and fire, especially if the device draws current beyond the Europlug's 2.5 A . For safe use, a full is required to ensure proper alignment and protection against overload. Compatibility with Type G sockets, the standard in the , , , and various nations, is limited and not recommended without adaptation. Type G outlets have three rectangular slots designed for flat pins, with safety shutters that require insertion of the longer earth pin to access the live and slots; the Europlug's round pins fit loosely into these slots if the shutters are manually bypassed (e.g., by inserting an object into the earth slot), but this practice creates high resistance at the contact points, leading to arcing, overheating, and fire hazards. The design mismatch prevents full insertion and secure connection, restricting safe use to extremely low-power devices under 2.5 A, while adapters with fuses and proper pin conversion are essential for compliance with standards like BS 1363. BS 4573 sockets, dedicated to shaver and low-voltage outlets in bathrooms across the and select regions, offer a more direct but imperfect fit for the Europlug. These outlets are strictly limited to 200 mA to minimize shock risk in wet environments and accept two round pins, but the standard specifies 5.1 mm diameter pins spaced 16.7 mm apart, differing from the Europlug's 4 mm pins at 19 mm spacing. The smaller, thinner pins allow insertion, though the loose contact can result in unreliable performance and intermittent power; this configuration is commonly exploited via adapters for devices like electric toothbrushes, but only for currents well below 0.2 A to avoid tripping the outlet's protective limits. In broader Commonwealth contexts, where British-influenced wiring dominates, adapters bridging Europlugs to Types D and G are readily available and frequently employed for portable electronics. However, in high-humidity settings like bathrooms or tropical areas, ungrounded configurations heighten risks, necessitating adapters with connections or avoidance of such outlets altogether for enhanced safety.

Other International Types (H, J, L, N, O)

The Europlug demonstrates limited compatibility with Type H sockets, which are unique to and territories. Modern Type H outlets, updated since 1989 to feature round pin holes, accept the Europlug's two 4 mm diameter round pins spaced 19 mm apart, enabling direct insertion for ungrounded devices rated up to 2.5 A. However, older ungrounded Type H sockets with flat blade slots provide only a partial fit, as the Europlug's thinner round pins fail to engage securely, potentially leading to loose connections or accidental disconnection. Voltage alignment poses no challenge, with 's 230 V, 50 Hz supply matching European norms. In , the Europlug integrates well with both legacy two-pin Type C sockets and contemporary Type J (T13) sockets, the latter serving as a hybrid design that accommodates ungrounded two-pin plugs alongside three-pin grounded variants. This compatibility stems from the 19 mm pin spacing shared with the Europlug, allowing it to occupy the live and positions in Type J outlets without issue. Nonetheless, the absence of an earth pin in the Europlug means it cannot leverage the grounding capability of modern T13 sockets, which is a consideration for safety in applications where earthing is recommended, though the plug remains suitable for its intended low-power, II device use. For Italy's Type L sockets, the Europlug aligns directly with the older 10 A ungrounded versions, which feature 4 mm diameter pin holes spaced 19 mm apart, matching the Europlug's dimensions for a stable connection at up to 10 A. In contrast, the 16 A Type L variants employ larger 5 mm pins with 26 mm spacing, rendering the Europlug incompatible without an , thus favoring dedicated Type L plugs for higher-current demands to ensure secure engagement and prevent overload risks. Type N sockets, governed by Brazil's NBR 14136 standard and implemented in as part of electrical updates, provide growing compatibility for the Europlug in 10 A ungrounded setups, where the 19 mm pin spacing and 4 mm hole diameter permit straightforward insertion for low-amperage appliances. This design facilitates transitional use in regions adopting Type N since around 2010, though variations in the 20 A configuration or manufacturing tolerances may necessitate adapters to bridge minor pin spacing discrepancies and maintain reliable contact. Thailand's Type O sockets offer physical accommodation for the Europlug via their round pin receptacles, but compatibility is often loose in older installations due to broader tolerances in socket dimensions, which can result in wobbly fits prone to vibration-induced disconnection. These limitations heighten concerns in Thailand's humid , where moisture may promote or arcing at imperfect connections, underscoring the need for adapters to enhance stability in such environments.

References

  1. [1]
    Power plug & outlet Type C - WorldStandards
    May 1, 2025 · This two-wire plug is ungrounded, unpolarised and has two round prongs. It is popularly known as the Europlug which is described in CEE 7/16.
  2. [2]
    Europlug - Interpower Cord Sets & Power Cords for the Global Market
    The standard 2-wire plug used in Class II, ungrounded, applications is popularly known as the Europlug, which is described in CEE 7/16.
  3. [3]
    World plugs - IEC
    The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm ...
  4. [4]
    CEE 7 standard/title - Museum of Plugs and Sockets
    CEE 7, dating back to the early 1950s, unifies standards utilized in several continental European countries.Missing: history | Show results with:history
  5. [5]
    Plug & socket types - WorldStandards
    May 15, 2025 · primarily used in France, Belgium, Poland, Slovakia & Czechia · 2 pins · grounded · 16 A · 220 – 240 V · socket compatible with plug types C, E & F.Power plug & outlet Types A & B · Power plug & outlet Type G
  6. [6]
    Europlugs and similar 2-pin plugs - Museum of Plugs and Sockets
    It is the de facto standard European non-earthed plug for low power (up to 2.5A) double insulated (Class II) devices, which do no require a protective earth.
  7. [7]
    [PDF] BS EN 50075: 1991
    This European Standard was approved by CENELEC on 11 September 1989. ... of pins. Dimensions in millimetres. A = insulating collar. B = metal pin. 1 ...
  8. [8]
    https://webstore.iec.ch/en/publication/8869
  9. [9]
    IECEE CEE-7:1963 - IEC Webstore
    Specification for plugs and socket-outlets for domestic and similar purpose. This CEE 7 publication originally published as the 2nd edition on 1963-05.Missing: Europlug | Show results with:Europlug
  10. [10]
    IEC TR 60083:1975
    IEC Technical Report 60083 Revised. IEC TR 60083:1975. Plugs and socket-outlets for domestic and similar general use. Standards. Contains specification sheets ...
  11. [11]
    IEC TR 60083:2009
    Feb 23, 2009 · Category. Safety. Publication type, Technical Report. Publication date, 2009-02-23. Edition, 6.0. ICS. 29.120.30. Withdrawal date, 2015-10-29.
  12. [12]
    [PDF] Guide to Worldwide Plug/Socket Patterns & Power Mains (Single ...
    plug type: NEMA L21-30 plug: 88030680 socket: 88031250 cord set: not available. C1. 2.5A. Europlug standard: IEC 60083 plug type: CEE 7/16 plug: 88040030 ...
  13. [13]
    https://www.iqsdirectory.com/articles/power-cord/electrical-plugs.html
  14. [14]
    Types of Electrical Plugs - IQS Directory
    Type C is the most widely used electrical plug globally, often called the "Europlug." It is an ungrounded and unpolarized plug featuring two round pins. The ...Missing: rewirable | Show results with:rewirable
  15. [15]
    https://www.internationalconfig.com/icc6.asp?item=70139-NW
  16. [16]
    EUROPLUG TYPE C - International Configurations
    The EUROPLUG TYPE C is a 2.5A-250V, 4.0 mm pin, 2-pole rewireable plug for Europe, South Africa, Thailand, Asia, and South America. It accepts round & flat ...Missing: spacing | Show results with:spacing
  17. [17]
    Type C Europlug Power Cords - Frigate Manufacturing
    Type C Europlug Power Cords are designed specifically for Class II double-insulated devices, where no earth conductor is required. The ungrounded 2-pin ...
  18. [18]
    CEE 7 standard AC plugs and sockets - Wikipedia
    CEE 7 is a standard for alternating-current plugs and sockets. First published in 1951 by the former International Commission on the Rules for the Approval ...
  19. [19]
    EU Plug EN 50075 Test Report | JJR Compliance Lab
    Oct 13, 2025 · The C-type plug is designed without grounding, featuring two cylindrical pins with a typical spacing of 19mm, and is widely used in most EU ...
  20. [20]
    [PDF] The technical feasibility of a harmonized plug and socket standard ...
    In standard atmospheric conditions, connection points of mated connectors shall show an initial contact resistance of 10 mΩ in direct current and 20 mΩ in ...
  21. [21]
    [PDF] Page 1 of 10 TRF No.: EN50075B - TEST REPORT EN 50075 Flat ...
    INSULATION RESISTANCE AND ELECTRIC STRENGTH. P. 11.1. Resistance ≥ 5 MΩ (500 V, 1 min). 1000MΩ. P. 11.2. Electric strength test (2000 V, 1 min): no flashover.
  22. [22]
    [PDF] TEST REPORT EN 50075 - GlobTek
    Jul 14, 2011 · Not possible to make connection between a pin of plug and a live socket contact of a socket-outlet while the other pin shall be accessible. P.
  23. [23]
    Summary of Standard BS/EN50075: Europlug Specifications and ...
    Summary of Standard BS/EN50075: Europlug Specifications and Testing Requirements ; Clause 7 dimensions, Gauge for pin diameter (Go and Not Go gauges) (Figure 1)
  24. [24]
    Martin Kaiser Black Euro Plug 2.5 Amp Unearthed EN 50075 IP20
    In stockIt is designed to handle a nominal current of 2.5A and a nominal voltage of 250V. This sturdy, impact-resistant plug comes with a cable gland and strain relief.
  25. [25]
    CEE Power Plugs | GlobalSpec
    Europlug Non-Rewireable Plug -- 88040030 from Interpower. Current Rating: 2.5 ... Configuration: CEE; Other; CEE 7/16; Current Rating: 2.5. Voltage Rating ...<|control11|><|separator|>
  26. [26]
    B-I-A Catalog, Part No: 121290 (www.biaonline.com)
    Standard, For use with Cable Type(s)*, Conductors, Pack Qty. 852BK01. Europlug, Black, 2.5A/250V, EN 50075, H03VV-F (round), 2x 0.75 mm², Bulk. 852BK. Europlug ...
  27. [27]
    [PDF] Strain Reliefs - Interpower
    We offer a variety of styles including nylon or nickel-plated brass dome-nut, nylon flex-style, and 90 degree angled strain reliefs. RoHs strain reliefs are ...<|control11|><|separator|>
  28. [28]
    plugs sockets in Europe
    Non-earthed Europlugs can be used in any continental European country. The British BS 1363 standard is fully different from any other type. A table gives ...Missing: harmonized flat profile
  29. [29]
    Power plug & outlet Type E - WorldStandards
    Jan 12, 2025 · Type E is primarily used in France, Belgium, Poland, Slovakia, the Czech Republic, Tunisia and Morocco.
  30. [30]
    Power plug & outlet Type F (Schuko) - World Standards
    Jan 13, 2025 · Plug F is commonly called “Schuko plug”, which is the acronym of “Schutzkontakt”, a German word meaning “protection contact” or “safety contact”.
  31. [31]
    Power plug & outlet Type K - WorldStandards
    Jan 4, 2025 · A type C plug fits perfectly into a type K socket. The Danish socket will also accept plug types E and F: however, there is no grounding ...
  32. [32]
    Power plug & outlet Type D - WorldStandards
    Dec 27, 2024 · This 6 amp plug has three round prongs that form a triangle. The central earth pin is 20.6 mm long and has a diameter of 7.1 mm.
  33. [33]
    Travel Adaptor for the United Kingdom | Electrical Safety First
    For United Kingdom the associated plug type is G, which is the plug that three rectangular pins in a triangular pattern. United Kingdom operates on a 230V ...
  34. [34]
    Power plug & outlet Type G - WorldStandards
    Dec 27, 2024 · TYPE G. Type G is mainly used in the United Kingdom, Ireland, Cyprus, Malta, Malaysia, Singapore, Hong Kong and the Arabian Peninsula.
  35. [35]
    2 pin plugs & adapters for toothbrushes explained - Electric Teeth
    Jan 20, 2025 · 2-pin plugs on toothbrushes are for safety in UK shaver sockets, which are less powerful. Adapters allow use with normal 3-pin sockets.
  36. [36]
    Adapt appliances for UK use | Electrical Safety First
    Using foreign appliances in UK sockets is dangerous so Electrical safety First have put together this guide packed with tips and advice.
  37. [37]
    Power plug & outlet Type H - WorldStandards
    Dec 27, 2024 · Strictly speaking, type H sockets are incompatible with type E or type F plugs, because the diameter of the Israeli socket contacts is 0.3 mm ...Missing: Europlug | Show results with:Europlug
  38. [38]
    Electricity | Switzerland Tourism
    Switzerland uses type C (2-pin) and Type J (3-pin) plugs. (Type C 2-pin plugs also fit J sockets.) Most power sockets are designed for three pin round plugs.
  39. [39]
    Travel Adaptor for Switzerland | Electrical Safety First
    Plug type C is the plug which has two round pins and plug type J is the plug which has three round pins. Switzerland operates on a 230V supply voltage and 50Hz.
  40. [40]
    Italian plugs and sockets - The Electrics Archive
    These are some example of type L plugs, commonly used in Italy. There are two types, one is rated at 10A and has pins with a diameter of 4.0mm spaced 19mm apart ...
  41. [41]
    Power plug & outlet Type L - WorldStandards
    Jul 31, 2024 · They differ in terms of contact diameter and spacing, and are therefore incompatible with each other. The 10 amp version has three 4 mm round ...Missing: Europlug | Show results with:Europlug<|control11|><|separator|>
  42. [42]
    Primary Country known for using TYPE N plugs is Brazil.
    Sockets / outlets accept South Africa SANS 164-2 type N (2P+E) 3 pin plugs and European CEE 7/16 "Europlug" (2 pin) plugs. *South Africa 16A-250V Type N plugs & ...
  43. [43]
    International Guide To Travel Adapters & Plugs
    Well, that's easy, because plug socket type H is used exclusively in Israel. However, this socket is compatible with plug type C because the 2 prongs are in the ...<|control11|><|separator|>
  44. [44]
    Power plug & outlet Type O - WorldStandards
    Dec 27, 2024 · Although they look similar, type O plugs are not interchangeable with the Israeli type H or the Danish type K power plugs. However, there is a ...Missing: Europlug | Show results with:Europlug
  45. [45]
    TYPE O Socket (Thai Socket) - leci electronics co., ltd.
    Compatible Plugs: TYPE O plug; Type C (Europlug) is physically compatible; Type E/F plugs have similar pin diameters but different grounding structures and ...<|control11|><|separator|>