Ferrari F60
The Ferrari F60 is a Formula One racing car designed and built by Scuderia Ferrari for the 2009 FIA Formula One World Championship, marking the team's 60th anniversary in the series and serving as their fifty-fifth purpose-built single-seater.[1] Powered by a rear-mounted 2.4-litre V8 engine producing approximately 750 horsepower, the car weighed 605 kg including the driver and featured a carbon-fibre and honeycomb composite monocoque chassis, along with a seven-speed semi-automatic gearbox.[1] It was the first Ferrari F1 car to incorporate the Kinetic Energy Recovery System (KERS), a hybrid technology that captured braking energy to provide a temporary power boost, in compliance with the season's revised technical regulations aimed at improving sustainability and overtaking opportunities.[1] Unveiled on 12 January 2009 in Maranello, with its first shakedown at Mugello on 13 January, the F60 was driven primarily by Kimi Räikkönen and Felipe Massa, with the former as the defending Drivers' Champion.[1] Throughout the 17-race season, the F60 showed initial promise but struggled with reliability and aerodynamic inefficiencies compared to rivals like Brawn GP and Red Bull Racing, ultimately helping Ferrari secure fourth place in the Constructors' Championship with 70 points.[2] The car's sole victory came at the Belgian Grand Prix, where Räikkönen triumphed from pole position in wet conditions, marking Ferrari's only win of the year and Räikkönen's 18th career victory. The team secured five podium finishes in total, including the victory, with additional highlights being Räikkönen's third places in Monaco, Germany, and Singapore, plus Massa's second in the season-opening Australian Grand Prix before his form dipped.[3] Massa led early points but suffered a severe skull fracture during qualifying for the Hungarian Grand Prix after being struck by a loose suspension spring from Rubens Barrichello's car, sidelining him for the remainder of the season and prompting Ferrari to attempt a comeback with seven-time champion Michael Schumacher, who withdrew due to a neck injury sustained in a motorbike accident.[4] Luca Badoer and Giancarlo Fisichella subsequently substituted, but neither scored points, contributing to Räikkönen's inconsistent results and the team's mid-pack finish.[2] The F60's development emphasized adaptability to the new 2.4-litre engine rules and KERS integration, overseen by technical director Aldo Costa, though ongoing setup challenges and the global financial crisis limited resources.[1] Despite its shortcomings, the car represented a transitional design for Ferrari, paving the way for improved competitiveness in subsequent seasons under new leadership, and it remains notable for its role in a turbulent year that tested the team's resilience.[1]Background and development
Naming and launch
The Ferrari F60 was developed in response to significant regulatory changes introduced by the FIA for the 2009 Formula One season, which included a ban on ground-effect aerodynamics to reduce dirty air and promote closer racing, as well as the reintroduction of slick tires after a decade of grooved compounds.[5] These alterations aimed to overhaul aerodynamic designs and enhance overtaking opportunities, prompting teams like Ferrari to rethink chassis and airflow management from the ground up.[5] The car was named the F60 to mark Scuderia Ferrari's 60th anniversary in Formula One, commemorating the team's debut in the championship at the 1950 British Grand Prix. This nomenclature departed from the sequential "F2008" pattern used for the prior model, emphasizing the milestone rather than continuity in design evolution.[6] Under the leadership of technical director Aldo Costa, the F60's development involved key contributions from chief designer Nikolas Tombazis and head of chassis design Simone Resta, who focused on adapting to the new rules while building on the previous year's platform. The project integrated these regulatory demands early in the design phase to ensure compliance and competitiveness. Ferrari unveiled the F60 on January 12, 2009, through an online presentation on the team's official website, marking the first digital launch of its kind for the constructor and allowing global fans immediate access to images and details.[7] Later that day, Felipe Massa conducted the initial shakedown run at the Mugello circuit, completing a few laps to check basic systems.[8] This low-key event at Maranello headquarters preceded the broader preseason testing, setting the stage for the season.[6]Testing
The pre-season testing program for the Ferrari F60 commenced with the initial shakedown at the Mugello Circuit on January 12, 2009, where Felipe Massa completed a few laps to verify basic functionality and systems integration.[8] Subsequent full-scale pre-season tests expanded the evaluation across multiple venues. At Mugello on January 19, 2009, Badoer and Kimi Räikkönen shared duties, accumulating 139 laps in variable weather that limited some aerodynamic data collection but allowed for endurance checks on the powertrain. The Jerez test from January 15-18, 2009, emphasized setup optimization, with Felipe Massa and Räikkönen running multiple configurations to assess suspension and tire interactions on the demanding Spanish layout. Later sessions at Barcelona's Circuit de Catalunya, spanning February 9-11 and 19-21, 2009, prioritized endurance runs and aerodynamic validation, including long stints to simulate race conditions and validate updates to the front and rear wings. Early testing revealed key challenges, particularly reliability issues with the Kinetic Energy Recovery System (KERS) and gearbox, which caused interruptions such as hydraulic failures linked to differential problems during extended runs.[9][10] Overall, the program covered approximately 3,500 km, providing valuable data on mechanical durability ahead of the Australian Grand Prix, though KERS integration remained a focal point for refinement.[11] Driver feedback highlighted progressive improvements. Räikkönen noted enhanced balance in the F60 compared to the F2008, describing a "better feeling" overall that aided adaptability to the reduced aerodynamic loads.[12] Massa echoed this positivity regarding tire performance, observing that the new slick tires functioned effectively despite suboptimal temperatures, contributing to consistent lap times during setup work.[10] Testing also included verification of compliance with the 2009 aerodynamic regulations, particularly the interpretation of the double diffuser rules. Ferrari's initial conservative approach without a double-decker design prompted ongoing assessments to ensure alignment with FIA guidelines, influencing mid-season redesign efforts after the Court of Appeal upheld the legality of rival implementations.[13]Design and technology
Chassis and aerodynamics
The Ferrari F60 utilized a carbon-fibre and honeycomb composite monocoque chassis, constructed to meet the FIA's 2009 technical regulations while prioritizing structural integrity and lightweight design. This monocoque served as the primary survival cell, with a minimum weight of 605 kg including the driver, ensuring compliance with safety and performance standards.[1][14][15] The suspension system featured independent setups at both ends, with push-rod actuation for improved aerodynamic efficiency and weight distribution. The front suspension employed push-rod activated torsion springs, while the rear used push-rod activated horizontal springs and wishbones, allowing for precise handling adjustments under the narrower car width mandated by the regulations. This configuration facilitated better packaging of components, including a brief integration point for the engine at the rear of the monocoque.[1][16] Aerodynamic developments on the F60 were shaped by the 2009 rule changes, which aimed to enhance overtaking through reduced downforce and drag. The front wing was relocated farther forward from the wheels, featuring a single-element main plane with an adjustable flap mechanism operable by the driver during motion to fine-tune airflow over the car. Rear wing endplates were optimized with curved profiles to minimize turbulence and direct cleaner air toward the diffuser, while the overall wing was positioned higher and narrower to comply with dimensional limits. Initially equipped with a single diffuser, the F60 adopted a high-line double diffuser mid-season following FIA clarification on its legality, which helped standardize the feature across teams and boosted rear downforce generation.[1][17][18][19] The chassis accommodated the reintroduction of slick tires, supplied by Bridgestone, which replaced grooved compounds from prior years to increase grip levels. With a wheelbase of 3,050 mm as per FIA specifications, the design ensured stable tire integration and aerodynamic balance. Safety enhancements included impact-absorbing structures in the frontal, side, and rear impact zones, along with compatibility for the mandatory Head and Neck Support (HANS) device to mitigate whiplash injuries.[20][15][21]Engine and powertrain
The Ferrari F60 utilized the Ferrari Tipo 056 V8 engine, a 2.4-liter naturally aspirated unit with a 90-degree V configuration, 32 valves, and a bore of 98 mm, compliant with the FIA's engine development freeze rules established in 2007 and carried over to 2009, which restricted modifications to the 2006-spec design and capped revs at 18,000 rpm.[1][15] This powerplant delivered approximately 750 horsepower at the engine's redline without additional boost systems, emphasizing reliability over raw power gains under the frozen regulations.[22] A key innovation for the F60 was its integration of the Kinetic Energy Recovery System (KERS), marking Ferrari's debut of this technology in collaboration with Magneti Marelli, where braking energy was harvested and stored—up to 400 kJ per lap—either in a battery or flywheel mechanism before being deployed as a 60 kW (approximately 80 horsepower) electric boost for up to 6.67 seconds per lap via an electric motor.[1][23] The system was centrally mounted on the engine under the rear chassis to optimize weight distribution, though early development encountered frequent failures, including deployment malfunctions during pre-season testing that halted sessions and required debugging.[24][25] The powertrain featured a 7-speed semi-automatic sequential gearbox with electronic controls, paddle shifters for quick shifts, and a longitudinal layout, paired with a limited-slip differential to manage torque distribution to the rear wheels.[1] This setup adhered to FIA standards for seamless gear changes without a clutch pedal, enhancing driver control during high-speed maneuvers. The fuel system followed standard FIA specifications for 2009, incorporating a single rubber bladder tank, typically around 130 liters in capacity to allow for refueling.[15] Overall, while the powertrain prioritized endurance under the engine freeze, early reliability challenges—such as intermittent KERS unreliability and engine-related failures linked to prior seasons' issues—demanded ongoing refinements during development to meet the season's demands.[9][23]2009 Formula One season
Driver lineup
The Ferrari F60 was driven primarily by the 2007 World Drivers' Champion Kimi Räikkönen, who competed in all 17 races of the 2009 season, and Felipe Massa, whose contract with the team had been extended following the 2008 campaign to secure his seat alongside Räikkönen.[26][27] Massa's participation was cut short by a severe injury sustained during qualifying for the Hungarian Grand Prix at the Hungaroring on July 25, 2009, when a suspension spring detached from Rubens Barrichello's Brawn GP car struck him in the helmet, causing a fractured skull and concussion that sidelined him for the remainder of the season.[28][29] Ferrari initially announced that seven-time world champion Michael Schumacher would replace Massa starting from the European Grand Prix, but Schumacher withdrew on 3 August 2009 due to a neck injury sustained in a motorbike accident.[30] To replace him, Ferrari promoted long-time test driver Luca Badoer for the European Grand Prix at Valencia and the Belgian Grand Prix at Spa-Francorchamps, marking Badoer's return to a Grand Prix starting grid after a decade away.[31] Badoer, who had served as Ferrari's chief test driver since 2001, struggled to adapt to the F60's characteristics in race conditions, prompting the team to replace him with Giancarlo Fisichella starting from the Italian Grand Prix at Monza through the season finale at Abu Dhabi.[32][33] Fisichella, released from his contract with Force India, brought recent competitive experience but also faced challenges extracting the F60's potential during his four outings.[34] The team's leadership was headed by Stefano Domenicali as team principal, a role he assumed in early 2008 and held through the F60's campaign, overseeing operations amid a difficult season.[35] Supporting him was Chris Dyer as chief race engineer and head of track engineering, responsible for on-track performance coordination and setup decisions.[36][37] Behind the scenes, support staff including test drivers like Badoer emphasized extensive simulator work at Ferrari's Maranello facility to optimize car setups, correlating virtual data with limited on-track testing under the era's testing restrictions to refine the F60's handling for varying circuits.[38][39]Season performance
The Ferrari F60 contested all 17 rounds of the 2009 Formula One World Championship, accumulating 70 points to finish fourth in the Constructors' Championship standings behind Brawn GP (172 points), Red Bull Racing (153.5 points), and McLaren-Mercedes (71 points).[2] This marked Ferrari's worst constructors' finish since 1993 and highlighted the team's struggles to adapt to the season's radical aerodynamic regulation changes, including simplified front wings, lower rear wings, and the controversial double diffuser that rivals like Brawn exploited more effectively. Additionally, the F60's Kinetic Energy Recovery System (KERS) proved unreliable and added excess weight, compromising handling and straight-line speed against Mercedes-powered competitors.[40] Ferrari endured a winless start to the season, scoring no points in Australia and Malaysia, but Räikkönen scored 1 point with 10th place in China due to the car's lack of pace and reliability issues. The team's breakthrough came at the Bahrain Grand Prix, where Felipe Massa finished fifth for six points, followed by further scoring in Spain and a podium at Monaco, where Kimi Räikkönen took third place. The sole victory arrived at the Belgian Grand Prix, with Räikkönen winning from sixth on the grid amid changing weather conditions, marking the F60's highlight. Other notable results included Räikkönen's second place at the Hungarian Grand Prix—where Massa had claimed pole position before suffering a severe injury from debris during qualifying, sidelining him for the remainder of the season—and a third-place finish for Massa at the German Grand Prix.[3] Driver changes exacerbated the challenges, with test driver Luca Badoer substituting for Massa in the European and Belgian Grands Prix but failing to score, finishing 17th and 14th respectively. Giancarlo Fisichella replaced Badoer for the final five races starting at the Italian Grand Prix, where he achieved his best result of ninth place, though he too scored no points overall. Ferrari's six podiums were predominantly Räikkönen's (five: 3rd in Monaco, 3rd in Europe, 2nd in Hungary, 1st in Belgium, 3rd in Italy), with Massa's single podium (3rd in Germany) pre-injury. The following table summarizes the F60's podium finishes:| Race | Date | Driver | Position |
|---|---|---|---|
| Monaco Grand Prix | 24 May | Kimi Räikkönen | 3rd |
| German Grand Prix | 12 July | Felipe Massa | 3rd |
| European Grand Prix | 23 Aug | Kimi Räikkönen | 3rd |
| Hungarian Grand Prix | 26 Jul | Kimi Räikkönen | 2nd |
| Belgian Grand Prix | 30 Aug | Kimi Räikkönen | 1st |
| Italian Grand Prix | 13 Sep | Kimi Räikkönen | 3rd |