Fact-checked by Grok 2 weeks ago

OpenTherm

OpenTherm is a manufacturer-independent communication protocol and interface specification designed for modulating heating, ventilation, and air conditioning (HVAC) systems, enabling seamless data exchange between room thermostats (masters) and heating appliances such as boilers (slaves).^[1] Developed to promote interoperability across devices from different manufacturers, it uses a simple two-wire, low-voltage, polarity-insensitive connection that supports both wired and wireless implementations, allowing for precise control of heating output based on real-time room temperature demands.^[1] The protocol was established in 1996 by the OpenTherm Association, a non-profit organization comprising heating industry manufacturers, to address compatibility challenges in residential heating controls and standardize communication for modulating appliances.^[2] Unlike on/off systems that operate at full capacity until a setpoint is reached, OpenTherm facilitates modulating control, where the appliance adjusts its output proportionally to the heating need, improving energy efficiency and comfort by reducing cycling and maintaining steady temperatures.^[1] Key technical features include a multi-point-to-point architecture suitable for home heating networks, support for standardized messages such as temperature setpoints, fault diagnostics, and tap water control, with provisions for manufacturer-specific extensions monitored by the Association.^[1] The protocol operates at a low baud rate over unshielded wiring, ensuring reliability in typical installations, and is scalable for integration with smart home systems or building automation.^[3] Membership in the OpenTherm Association grants access to the full specification (version 4.0, released in 2011), which defines data packets, error handling, and compliance testing to ensure broad adoption across Europe and beyond.^[2]

Overview

Definition and Purpose

OpenTherm (OT) is a manufacturer-independent, open-standard digital communication protocol designed for residential central heating and heating, ventilation, and air conditioning (HVAC) systems. It enables bi-directional control and data exchange between thermostats, controllers, and modulating appliances such as boilers, allowing these devices to communicate seamlessly regardless of the manufacturer. Developed starting in 1996 under the auspices of the OpenTherm Association, the protocol establishes a standardized interface that promotes compatibility and ease of integration in heating setups.^[1]^[4] The primary purpose of OpenTherm is to facilitate precise modulation of heating output, adjusting the appliance's performance in response to real-time room temperature demands rather than relying on traditional on/off cycling. This modulation optimizes energy efficiency by matching heat delivery to actual needs, reducing fuel consumption and improving overall system performance compared to non-communicative controls. Additionally, the protocol supports advanced functions such as fault detection for diagnostics, outdoor temperature compensation for weather-adaptive operation, and hot water control for domestic supply management.^[1]^[5] At its core, OpenTherm operates as a multi-point-to-point system, enabling the connection of multiple devices in a heating network without requiring a central bus architecture. This design ensures robust interoperability across brands, allowing installers to pair components from different producers while maintaining reliable communication and avoiding proprietary lock-in. By prioritizing simplicity and expandability, the protocol supports future enhancements in HVAC technology without necessitating widespread rewiring or replacements.^[1]^[4]

Key Features and Benefits

OpenTherm utilizes a polarity-insensitive two-wire connection that supports cable lengths of up to 50 meters without requiring twisted-pair wiring.^[6] This setup eliminates the need for a separate power supply for controllers, as they draw power directly from the bus, with a minimum delivery of 35 mW sufficient for basic operation without batteries.^[7] The protocol further incorporates Manchester encoding for robust data transmission and handles 32-bit messages transmitted every second, complete with start, parity, and stop bits, ensuring reliable communication over the connection.^[6] A primary benefit of OpenTherm is its support for load compensation, which modulates boiler output to precisely match heating demand, improving energy efficiency compared to on/off systems, particularly in condensing boilers.^[7] The simplicity of installation—requiring no additional configuration or specialized tools—significantly reduces setup costs and time for installers.^[8] Additionally, its standardized design makes it future-proof for integration with home automation systems, allowing seamless connectivity across compatible devices from different manufacturers.^[1] OpenTherm's bi-directional communication enables advanced fault diagnostics and remote monitoring, providing real-time status updates and error codes directly to thermostats for quicker troubleshooting.^[7] These capabilities not only improve system reliability but also support proactive maintenance, extending equipment lifespan by minimizing unnecessary cycling.^[8]

History

Founding and Early Development

OpenTherm was established in 1996 in Naarden, Netherlands, by Honeywell and other European manufacturers seeking to create a standardized communication protocol for heating controls in residential and commercial systems.^[9] The initiative addressed the need for interoperability among diverse heating appliances and thermostats, moving away from fragmented proprietary systems prevalent in the European market at the time.^[10] In November 1996, Honeywell released the first OpenTherm specification, which outlined a simple, manufacturer-independent communication framework. Shortly thereafter, Honeywell transferred ownership of the specification to the newly formed OpenTherm Association for a nominal fee of one British pound, ensuring the protocol's open development. The early focus centered on enabling modulating control to replace traditional on/off relay mechanisms, allowing boilers to adjust output dynamically based on thermostat signals for improved efficiency.^[10]^[11] The OpenTherm Association was founded as a non-profit entity under Dutch law to oversee the protocol's management, licensing, and evolution, with initial membership drawn from leading boiler and thermostat producers including Honeywell, Viessmann, and Siemens. This structure promoted collaborative input from industry stakeholders to refine the standard based on practical applications and market feedback. By 2008, membership had expanded to 42 companies, reflecting growing adoption across the heating sector.^[10]

Specification Evolution

The OpenTherm protocol specification began with version 1.0 in November 1996, establishing the foundational bi-directional communication for controlling modulating heating appliances between thermostats (masters) and boilers (slaves).^[12] This initial release focused on basic control signals, data exchange for temperature setpoints and modulation levels, and a simple two-wire interface without polarity, enabling continuous dialogue to optimize boiler output based on real-time demand.^[13] Subsequent early updates refined these basics for reliability and compatibility. Version 1.1, released on February 1, 1998, expanded configurations for OpenTherm/Plus (OT/+) and OpenTherm/Light (OT/-) variants, specified bit-ordering in frame formats, and clarified data types to ensure consistent implementation across devices.^[13] By version 2.2, approved on February 7, 2003, enhancements included definitions for power-feeding mechanisms from the slave to the master, detailed interface specifications for voltage levels and signal dynamics, and the addition of diagnostic flags (e.g., ID 115 for fault status) to support basic troubleshooting. The mid-period evolution addressed growing demands for advanced functionality and energy efficiency. Version 3.0, approved on June 16, 2008, introduced Smart Power mode, allowing the master to request low, medium, or high power states from the slave to minimize energy use during idle periods, and added support for multi-point to point configurations, enabling gateways for multiple masters on a single bus while maintaining point-to-point reliability.^[14] New data IDs, such as ID 36 for flame current and ID 98 for RF sensor status, expanded monitoring capabilities.^[13] Version 4.0, released on May 12, 2011, further broadened message types with additional IDs (e.g., 38 for water pressure and 109-112 for remote parameters), facilitating advanced diagnostics like fault history and remote setpoint overrides to improve system maintenance and performance.^[13]^[15] Recent updates have emphasized integration with modern standards and regulations. Version 4.1, officially released on October 8, 2018, enhanced certification compatibility by mandating support for new IDs like 39 (remote override for room setpoint 2) and 93 (brand index), while refining low-energy modes within Smart Power to align with efficiency requirements; the certification tool now requires v4.1+ compliance for new devices, effective within six months of release.^[16] Version 4.2, approved on November 10, 2020 and remaining the latest as of 2025, built on this by adding support for IoT-friendly extensions, such as improved remote diagnostics and integration hooks for smart home ecosystems, further enabling low-energy optimizations.^[13] Throughout its evolution since 1996, the specification has been driven by OpenTherm Association members' needs to meet energy regulations, including EU Ecodesign Directive requirements for seasonal efficiency in space heaters and combination boilers.^[11]^[17]

Technical Design

Communication Protocol

The OpenTherm communication protocol operates primarily at the application layer, defining a set of messages exchanged between a master device, such as a thermostat, and a slave device, like a boiler, to enable control and monitoring of heating systems. This layer includes over 90 defined message types, categorized into classes such as status information, configuration settings, remote commands, and read/write data points; examples include setpoint temperature requests for central heating or domestic hot water, and status reads for fault detection or operational modes. Each message utilizes 32-bit data frames structured with an 8-bit data identifier (Data ID) specifying the parameter, a 16-bit value field for the actual data (often representing floating-point temperatures in 0.1°C increments or status flags), and type bits indicating read or write operations as well as data validity.^[3]^[18] The message format consists of a start bit followed by 32 data bits—including a 3-bit message type field (indicating master-to-slave or slave-to-master direction and read/write/invalid frame types), a 4-bit spare field, an 8-bit Data ID, a 16-bit data value, and a parity bit for error detection—and a stop bit, forming a total transmission unit of 35 bits including framing. These messages are transmitted serially at a nominal bit rate of 1000 bits per second using Manchester encoding, which ensures self-clocking and noise immunity over the digital signal path. The protocol employs even parity for the data bits to verify integrity, with invalid messages discarded by the receiver. (version 4.2 as of 2024)^[3]^[18] Bi-directional communication is managed through a polling mechanism where the master initiates requests to the slave at intervals of approximately one second, allowing the slave to respond with corresponding data or status updates in the reverse direction during the same frame exchange. This synchronous polling supports continuous monitoring and control adjustments. The overall design promotes minimum interoperability by mandating compliance with core message types and data interpretations, while permitting optional manufacturer-specific extensions in reserved Data ID ranges (e.g., 128–255 for diagnostics) to add proprietary features without compromising basic functionality.^[3]^[18]

Physical Interface and Wiring

The OpenTherm physical interface utilizes a simple two-wire connection consisting of an untwisted pair, with no shielding required under normal conditions, though twisted or screened cables may be used in electrically noisy environments.^[18] This design ensures polarity insensitivity, allowing the wires to be connected in either orientation without affecting operation.^[18] The interface operates on low-voltage DC signaling, typically ranging from 15 to 24 V, enabling safe and efficient communication between the master device (such as a room thermostat) and the slave device (such as a boiler).^[3] Wiring specifications emphasize reliability over distance, with a maximum cable length of 50 meters and a total loop resistance not exceeding 2 × 5 ohms to maintain signal integrity.^[18] Data transmission occurs via modulation of voltage levels from the master to the slave (high state: 15–18 V; low state: ≤7 V) and current levels from the slave to the master (high state: 17–23 mA; low state: 5–9 mA), supporting concurrent power delivery and communication on the same pair.^[18] Receiver thresholds are defined as 9.5–12.5 V (nominal 11 V) for voltage signals and 11.5–14.5 mA (nominal 13 mA) for current signals, with rise and fall times limited to ≤50 μs to ensure precise bit encoding.^[18] The bus-powered design supplies the master device through the interface, with the slave providing a minimum current of 5 mA in low states and the master's consumption limited to ≤5 mA, enabling battery-free room units in basic operations; internal regulation typically derives 3.3–5 V from the bus voltage, with galvanic isolation required per EN60730-1 standards for safety.^[3]^[18] This power arrangement supports line-powered configurations without local mains or battery supplies for the master.^[18] Additionally, the interface is compatible with relay-based fallbacks, allowing seamless transition to legacy on/off control if OpenTherm communication fails, by integrating standard relay outputs for basic thermostat functionality.^[3] Message transmission over these wires employs Manchester encoding at a nominal 1000 bits per second, as detailed in the communication protocol specifications.^[18]

Multi-Point to Point Configuration

The multi-point to point configuration in OpenTherm was introduced in version 3.0 of the protocol specification, released in June 2008, to enable communication among multiple devices beyond the traditional single master-slave setup.^[10] This extension allows a single master device, such as a room thermostat, to connect and control several slave devices in a daisy-chain topology using the standard 2-wire, non-polarity-sensitive physical interface.^[1] Typically supporting up to 3-5 devices— for example, a thermostat linked to a zone valve and then to a boiler—the configuration facilitates straightforward integration without requiring a more complex bus system like Modbus.^[10] Addressing in this configuration relies on 256 unique OpenTherm IDs (OT-IDs), with 128 reserved for original equipment manufacturer (OEM) use and the remaining 90 functionally specified for standard operations.^[10] The master device polls the network sequentially, and slave devices respond only when their assigned OT-ID matches the poll, enabling individual, group, or broadcast addressing as needed.^[10] This mechanism ensures orderly communication in shared networks, where each slave is allocated a unique address during setup.^[10] In practical applications, the multi-point setup supports the integration of diverse HVAC components, such as heat pumps, ventilation units, and solar thermal systems, all controlled from a central master without proprietary gateways in most residential scenarios.^[10] For instance, a thermostat can modulate a boiler while simultaneously adjusting a zone valve for zoned heating or interfacing with a ventilation slave for coordinated air handling.^[10] This approach enhances system modularity and energy management in modern homes by allowing incremental additions of compatible devices.^[1] Signal integrity is maintained over the 2-wire bus for chains up to 50 meters, leveraging the protocol's low-voltage design to minimize noise and attenuation.^[10] Beyond this distance, repeaters or signal boosters are recommended to prevent communication errors in extended installations, ensuring reliable operation across the supported device count.^[10]

Variants

OpenTherm/Plus (OT/+)

OpenTherm/Plus (OT/+) represents the full-featured wired variant of the OpenTherm protocol, designed for robust communication in residential heating systems. It operates over a simple two-wire connection that simultaneously delivers low-voltage power to the controller—typically a room thermostat—and supports bidirectional digital data exchange with heating appliances such as boilers. The protocol employs Manchester encoding to ensure reliable, self-clocking transmission of frames, minimizing errors in noisy environments without requiring additional synchronization signals. This implementation fully utilizes the OpenTherm application layer, accommodating over 90 defined message types for diverse control and monitoring functions.^[19] Key specifications of OT/+ include support for 256 unique OpenTherm IDs (OT-IDs), with 128 allocated for standardized functions by the OpenTherm Association and the remainder available for manufacturer-specific extensions. This enables full bi-directional control, allowing the master device (e.g., thermostat) to modulate boiler output based on real-time demand, retrieve diagnostic data like fault codes or water pressure, and adjust remote parameters such as setpoint temperatures or fault histories. The protocol's structure, as detailed in the communication layer, facilitates these interactions through request-response conversations, ensuring precise and efficient system operation.^[3] In practice, OT/+ dominates applications in Europe, where it is widely integrated into modulating boilers and smart thermostats from multiple manufacturers, promoting high interoperability across brands without proprietary lock-in. Membership in the OpenTherm Association is required for licensing and certification, guaranteeing compliance and seamless device pairing in installations ranging from single-family homes to multi-zone systems. Its adoption enhances energy efficiency by enabling continuous modulation rather than on/off cycling, reducing wear and fuel consumption.^[19]^[2] A notable aspect of OT/+ is its backward compatibility with legacy OpenTherm implementations, allowing basic on/off signaling as a fallback while unlocking extended capabilities in compatible devices. For instance, it supports advanced features like pump speed control, where the thermostat can dynamically adjust circulation rates to optimize heat distribution and minimize energy use during low-demand periods. This extensibility, built on the core protocol's foundation, positions OT/+ as the preferred choice for modern, intelligent heating controls.^[3]

OpenTherm/Light (OT/-)

OpenTherm/Light (OT/-) is a simplified variant of the OpenTherm protocol, intended for easier implementation on products limited to analogue signaling. It employs a basic pulse-width modulation (PWM) voltage signal transmitted over two wires to convey only the control setpoint—representing the desired heating modulation level—from the room unit to the boiler. Unlike the full protocol, OT/- lacks bi-directional digital communication, restricting interactions to unidirectional setpoint transmission and minimal status feedback from the boiler.^[18]^[19] The protocol's key specifications focus on PWM signaling with a frequency range of 100 Hz to 500 Hz (period between 2 ms and 10 ms) and duty cycles from 0% to 100%, where the duty cycle directly corresponds to the setpoint modulation (0-100%). Boiler feedback is provided via current switching: a low current (5-9 mA) indicates normal operation, while a high current (17-23 mA) signals a lock-out fault. Central heating enable/disable is handled through duty cycle thresholds (<5% for disabled), but no advanced data exchange, such as temperature readings or diagnostics, is supported. This narrow scope limits OT/- to basic setpoint control, providing little advantage over conventional on/off thermostats in terms of efficiency or functionality.^[18] OT/- was designed for legacy systems or cost-sensitive appliances where full digital capabilities are unnecessary, utilizing the same two-wire physical interface as other OpenTherm variants for compatibility. Defined in early protocol specifications, it has seen limited adoption due to its reduced feature set, with manufacturers favoring the more versatile OpenTherm/Plus (OT/+) for comprehensive control. Few certified OT/- implementations exist, as the protocol's simplicity does not justify widespread use in modern heating systems.^[19]^[18]

OpenTherm Smart Power

OpenTherm Smart Power is a power management extension to the OpenTherm protocol, introduced in version 3.0 in June 2008.^[10] This feature enables the master device, such as a room thermostat, to dynamically request adjusted power levels from the slave device, like a boiler, to optimize energy efficiency over the shared two-wire bus.^[10] The available power levels are low at 35 mW, medium at 136 mW, and high at 255 mW, allowing the system to scale based on operational demands without exceeding the bus's capabilities.^[10] The primary functionality of OpenTherm Smart Power is to support enhanced device capabilities in slave units by providing sufficient bus power for additional components, eliminating the need for separate external power supplies or batteries.^[10] For instance, it powers features such as LCD backlights for displaying boiler status, wireless communication modules, or integrated sensors, which would otherwise require higher energy draw.^[10] Power negotiation occurs through dedicated protocol messages exchanged during the initial master-slave handshake, where the master signals its requirements and the slave confirms the supported mode.^[10] This mechanism ensures backward compatibility with low-power devices by defaulting to the 35 mW low mode, while allowing upgrades for more demanding applications.^[14] Support for Smart Power modes has been mandatory for slave devices since protocol version 3.0, promoting widespread adoption in energy-conscious HVAC systems.^[14] European Union standby power regulations, under Regulation (EU) 2023/826 effective from May 2025, mandate consumption below 0.5 W in off or standby modes for applicable electronic devices.^[20]

Certification and Standards

Certification Process

To obtain OpenTherm certification, manufacturers must first become members of the OpenTherm Association, as access to the official test tools and licensing procedures is restricted to members.^[21] The certification process emphasizes compliance with the latest protocol specification, which requires support for version 4.1 or higher for all new devices (released October 8, 2018), with certification tool support implemented since 2020.^[16] The core of the certification involves rigorous testing to verify product adherence to the OpenTherm protocol. This includes independent laboratory evaluation conducted by accredited bodies such as Kiwa Nederland B.V./Gastec, focusing on key aspects like interoperability between devices, message compliance for accurate communication, power delivery over the two-wire interface, and fault handling mechanisms to ensure system reliability.^[22] Testing utilizes the Association's official certification tool, a specialized software and hardware setup available exclusively to members for €3,500 (excluding VAT), which enables both self-testing during development and formal validation.^[21] Manufacturers may opt for self-certification as the primary method but must submit detailed test reports from either self or independent testing to the OpenTherm Association Secretariat.^[22] Upon successful verification of the test reports by the OpenTherm Association Secretariat, the Association issues a product licence, allowing certified products to use the OpenTherm name and logo, while manufacturers must ensure that production units conform to the tested prototype in functionality.^[22] This process ensures minimum functionality across the ecosystem, with membership fees of €2,750 (excluding VAT) per year covering license administration.^[21]

Membership and Compliance

The OpenTherm Association is a non-profit organization established in 1996 to promote the adoption and ongoing development of the OpenTherm communication protocol for HVAC systems.^[23] Its primary objectives include providing protocol specifications, facilitating technical training, and organizing member events to foster collaboration among stakeholders in the heating industry.^[9] As of 2025, the association counts approximately 75 members, mainly manufacturers of control devices and heating appliances, with key participants including Honeywell (via Resideo), Bosch Thermotechniek BV, and Danfoss.^[24] ^[25] In February 2025, the Association engaged with industry leaders at ISH China & CIHE, promoting the protocol's adoption in the Asian market.^[26] Notable activities include the Annual Members Event held on May 13-14, 2025, in Billy-Berclau, France, which focuses on innovation and technical exchange.^[27] Membership is open to any company or organization engaged in the manufacture, distribution, installation, or related activities involving heating systems and components, including original equipment manufacturers (OEMs) not directly implementing the protocol.^[21] Members gain exclusive access to comprehensive protocol documentation, an automated testing tool for compliance verification (available for €3,500 ex. VAT), and support throughout the certification process.^[21] Annual membership fees are set at €2,750 ex. VAT, which covers licensing and contributes to protocol maintenance and enhancements, such as potential integrations with emerging technologies like IoT for smarter HVAC controls.^[21] These benefits enable members to collaborate on protocol extensions through the association's Technical and Marketing Committees, ensuring the standard evolves with market needs.^[24] Compliance with OpenTherm standards is enforced primarily through branding restrictions: only members whose products pass required testing—via self-certification or third-party validation by accredited bodies like Kiwa Nederland B.V. or Gastec—may use the official OpenTherm name and logo.^[21] Non-members are permitted to implement the protocol in their devices without association licensing, provided they avoid any official branding, which helps maintain the integrity of the standard while encouraging broad adoption.^[28] The association promotes adherence by issuing detailed guidelines, conducting conformity appraisals, and releasing periodic updates to the protocol specifications, all managed under Dutch law to support reliable interoperability.^[9] Although rooted in European heating standards, the association's framework is designed for global use, with members and licensees operating internationally.^[24]

Applications and Adoption

Energy Efficiency and Integration

OpenTherm enhances energy efficiency in heating systems primarily through its support for boiler modulation, which allows the boiler to adjust its output precisely to match the heating demand rather than cycling on and off frequently. This modulation reduces energy waste associated with frequent starts and stops, leading to gas savings of 10-20% compared to traditional on/off controls.^[29]^[30] Additionally, the protocol facilitates weather compensation, where the system adjusts boiler output based on outdoor temperatures, and zoning capabilities that enable independent control of different areas in a building, further optimizing heating distribution and minimizing unnecessary energy use.^[31]^[32] Integration with modern smart home ecosystems is a key strength of OpenTherm, enabling seamless connectivity with devices like Google Nest and Tado smart thermostats for remote monitoring and control.^[33] It also supports home automation protocols such as Zigbee, as seen in products like the Siemens Zigbee Room Thermostat, and aligns with the Matter standard (launched in 2022, with updates in 2024) for broader interoperability across platforms.^[34]^[33] This compatibility allows for app-based adjustments and integration with predictive algorithms that learn user patterns to preemptively optimize heating schedules, enhancing overall system responsiveness without relying on the detailed modulation mechanics of the protocol itself. In practical applications, OpenTherm is widely used in residential boilers, heat pumps, and underfloor heating systems, where its load compensation features ensure efficient operation by dynamically adjusting flow temperatures to actual needs. These capabilities help systems comply with regulatory requirements, such as the UK's Part L Building Regulations, which mandate load or weather compensation for improved energy performance in new installations.^[35] Furthermore, the OpenTherm Smart Power variant reduces standby losses by powering thermostats directly from the boiler, eliminating battery dependency and achieving power consumption below 0.5 W in off mode, in line with the 2025 EU ecodesign updates for low-energy heating controls.^[36]^[37]

Global Usage and Recent Developments

OpenTherm has seen primary adoption in Europe, where the continent accounts for over 45% of the global revenue in the smart boiler controller market as of 2024.^[38] The protocol is particularly prevalent in countries like the Netherlands and the United Kingdom, driven by its integration into modulating HVAC systems for residential and commercial heating. Globally, the market for OpenTherm-enabled smart thermostats was valued at $2.8 billion in 2024, reflecting steady uptake in energy-efficient heating solutions.^[39] Adoption is expanding beyond Europe, with the Asia-Pacific region emerging as the fastest-growing area at a projected CAGR of 16.8% from 2025 to 2033, fueled by exports of compatible devices and rising demand for smart HVAC technologies.^[38] In Australia, while specific penetration data is limited, the protocol benefits from broader trends in smart home integration amid increasing focus on energy management. As of 2025, over 80 products have been certified under the OpenTherm standard, spanning thermostats, boiler controllers, and interfaces from manufacturers like Tado, Resideo, and KD Navien.^[40] Recent developments include the OpenTherm Association's launch of a UK awareness campaign in 2019 to promote the protocol's benefits for heating efficiency and compatibility among installers and consumers.^[41] The campaign has continued to support regulatory pushes toward low-carbon heating. The global smart boiler controller OpenTherm market reached $1.12 billion in 2024 and is expected to grow to $3.36 billion by 2033 at a CAGR of 12.8%, underscoring ongoing innovation in IoT-enabled heating controls.^[42] The 2025 Annual Members Event, held on May 13-14 in Billy-Berclau, France, facilitated discussions on protocol advancements and industry collaboration.^[27] In January 2025, Hive upgraded its smart thermostat to support OpenTherm for compatible combi boilers. Additionally, in May 2025, the OpenTherm Association assessed the impacts of the EU Cyber Resilience Act and UK PSTI Act on the protocol, addressing cybersecurity requirements for connected heating devices.^[43]^[44] Challenges persist in compatibility, as OpenTherm requires specific boiler and thermostat support; not all devices are fully interoperable, and non-certified equipment can lead to suboptimal performance.^[45] Additionally, the shift toward wireless hybrids introduces hurdles, such as the UK-specific OpenTherm V3+ wireless kit lacking full protocol support in some configurations.^[23]

References

[1]
What is OpenTherm?
Jun 3, 2019 · OpenTherm is a non-manufacturer-dependent system of communication between modulating HVAC heating appliances and room thermostats.
[2]
Opentherm Association: Home
May 1, 2024 · The OpenTherm communication protocol is primarily designed to control modulating heating appliances. The protocol is available to members of the ...<|control11|><|separator|>
[3]
OpenTherm Protocol Specifications v4-0
May 12, 2011 · The OpenTherm communication protocol is primarily designed to control modulating heating appliances. The protocol is available to members of the ...
[4]
https://ihormelnyk.com/Content/Pages/opentherm_library/Opentherm%2520Protocol%2520v2-2.pdf
[5]
[PDF] What is OpenTherm? - Resideo
OpenTherm is a communication protocol between heating appliances and thermostats, setting rules for communication and using a multi-point to point protocol.
[6]
OpenTherm Protocol Specifications v2-2
Feb 7, 2003 · The OpenTherm communication protocol is primarily designed to control modulating heating appliances. The protocol is available to members of the ...Missing: PDF | Show results with:PDF
[7]
None
### Summary of OpenTherm from the Document
[8]
Benefits of OpenTherm Connectivity | Blog - Ideal Heating
Oct 30, 2019 · OpenTherm is a system of communication between modulating heating appliances and room thermostats which is not manufacturer dependent.Missing: definition | Show results with:definition
[9]
About the Association - Opentherm Association
Jun 3, 2019 · The OpenTherm Association is a non-profit organisation, and its only objectives are to promote the use of the OpenTherm protocol and develop it further.
[10]
None
### Summary of OpenTherm Protocol and Association History
[11]
Why a communication protocol? - Opentherm Association
Jun 3, 2019 · The OpenTherm communication protocol is primarily designed to control modulating heating appliances. The protocol is available to members of the ...Missing: initial focus relay
[12]
[PDF] Functional-specification-testtool.pdf - Opentherm Association
OTM-files of previous versions of the OpenTherm windows GUI can be used for this version. When these files are saved, they are converted to the new format ...
[13]
OT Protocol Specification v4 2 | PDF | Osi Model - Scribd
The OpenTherm Protocol Specification v4.2 outlines the communication standards for HVAC system controls, established by the OpenTherm Association.
[14]
Is Smart Power support mandatory - Opentherm Association
Sep 1, 2020 · Yes, since OpenTherm Protocol Specification 3.0 it is mandatory to support all smart power modes for a slave device.
[15]
Latest released versions Archives - Opentherm Association
OpenTherm Protocol Specifications v4-0 · Secretariat OpenTherm2011-05-12T10:31 ... It consists of a communication protocol and an interface specification.Missing: history | Show results with:history
[16]
Which protocol version is supported by the Certification Tool
Sep 1, 2020 · ... OpenTherm version 4.1 within 6 months after the release official date of version protocol specification 4.1 on the October 8th 2018.Missing: 1 | Show results with:1
[17]
Ecodesign and energy labelling - Space heaters
Ecodesign and energy labelling - Space heaters. Regulation (EU) No 813/2013, Regulation (EU) No 811/2013. Short name. Ecodesign and energy labelling - Space ...
[18]
None
**OpenTherm Protocol Specification v2.2 Summary (7 February 2003)**
[19]
How to use the Protocol? - Opentherm Association
May 6, 2020 · The OpenTherm communication protocol is primarily designed to control modulating heating appliances. The protocol is available to members of the ...
[20]
7 EU Standby Power Rule Changes You Need to Know - ByteSnap
Aug 5, 2024 · Who is Affected by the EU Standby Power Regulations 2025? The ... OpenTherm Development Services | Smart Heating · Automated Electronic ...
[21]
Membership - Opentherm Association
Feb 24, 2023 · The cost for this tool is € 3.500,- (ex. VAT). With this tool self certification has become the main method for obtaining a license. And thereby ...
[22]
How to test and certify - Opentherm Association
May 1, 2024 · The complete test and certification procedure can be found in the members part of the website. Testing by an independent testing body.Missing: process | Show results with:process
[23]
OpenTherm Boilers and Controls – Hub.ARated.com
OpenTherm History? OpenTherm was originally created by Honeywell and was sold to the OpenTherm Association on November 1996 for one British Pound. This was no ...
[24]
The organization - Opentherm Association
Mar 13, 2025 · The association currently comprises about 75 members, mainly manufacturers of controls devices or heating devices.<|control11|><|separator|>
[25]
Opening up opportunities for OpenTherm - PHAM News
May 11, 2020 · The OpenTherm Association is working on the introduction of an automated test tool that should be available for all member companies within the ...
[26]
Register Now! - Opentherm Association
Apr 28, 2025 · We are excited to announce that our Annual Members Event 2025 will be held on May 13-14, in the beautiful setting of Groupe Atlantique, at Billy-Berclau, ...
[27]
Members - Opentherm Association
Jul 29, 2024 · The majority of current members are directly responsible for implementing the OpenTherm protocol; i.e. the manufacturers of controlling devices ...
[28]
We need controls that speak the same language as the boiler
Jan 11, 2020 · OpenTherm is a communications protocol or, put simply, a language operating between the boiler and heating control to increase and decrease the ...Missing: founded 1996
[29]
OpenTherm - How This Smart Heating Technology Saves Energy
OpenTherm serves as a modern communication protocol, bridging the gap between boilers and room thermostats. It is a technology standard designed to enhance the ...
[30]
[PDF] ASSESSING THE ENERGY SAVINGS FROM ADVANCED ROOM ...
Oct 1, 2021 · Directly modulating thermostats can reduce gas use by 12%, while proportional on/off load compensation can reduce it by 10% over the heating ...
[31]
The rising importance of OpenTherm for heat pump manufacturers
Jul 30, 2024 · At the heart of OpenTherm's appeal is its ability to enhance efficiency. By allowing for more precise control of heat pump output, OpenTherm ...
[32]
What is OpenTherm and How is it Important for Managing Heating in ...
Sep 17, 2024 · OpenTherm (also known as OT) is an open-standard protocol designed for heating systems that enables communication between appliances and thermostats.Missing: definition | Show results with:definition
[33]
https://www.matteralpha.com/explainer/opentherm-managing-heating-smart-homes
[34]
Opentherm Boilers & Controls | Compatibility Guide - The Heating Hub
Apr 18, 2020 · Baxi, Ideal, Viessmann, Ferroli and Main all manufacture combi boilers using the Opentherm technology. These boilers are compatible with many ...
[35]
[PDF] OpenTherm, Modulating Control Accurate control and cost reduction
An OpenTherm system however allows a thermostat to control the room temperature by telling the boiler to modulate the boiler flame, a modulating control.Missing: initial focus
[36]
New EU 2025 Standby Power Consumption Standards - Octopart
Jul 26, 2024 · The new EU 2025 standards limit standby power to 0.5W (0.8W with display), 2-8W for networked standby, and apply to more product categories.Missing: heating controls
[37]
Smart Boiler Controller OpenTherm Market Research Report 2033
Europe currently holds the largest share of the Smart Boiler Controller OpenTherm market, accounting for over 45% of global revenue in 2024. This dominance is ...
[38]
OpenTherm Smart Thermostat Market Research Report 2033
According to our latest research, the Global OpenTherm Smart Thermostat market size was valued at $2.8 billion in 2024 and is projected to reach $8.1 billion by ...
[39]
Products - Opentherm Association
May 28, 2019 · OpenTherm is a non-manufacturer-dependent system of communication between modulating HVAC appliances and room thermostats.
[40]
OpenTherm launches awareness campaign in UK
Jul 25, 2019 · The OpenTherm Association is intending to introduce the OpenTherm protocol more widely in the UK and has launched an initial three-year communication process.Missing: regulations | Show results with:regulations
[41]
Smart Boiler Controller OpenTherm Market Research Report 2033
The market is projected to expand at a CAGR of 12.8% from 2025 to 2033, reaching an estimated USD 3.36 billion by 2033. This growth is underpinned by the ...
[42]
What is OpenTherm Technology and why use it?
Dec 18, 2014 · OpenTherm is a point-to-point communication system and connects gas central heating (condensing) boilers with room thermostats.