Fact-checked by Grok 2 weeks ago

PCM adaptor

A PCM adaptor is a device that converts analog stereo audio into digital (PCM) format and encodes it as a pseudo-video signal—typically a pattern of bars and dots—for recording on consumer video cassette recorders (VCRs) like or formats, enabling high-fidelity storage on readily available video tape. These adaptors, introduced in the late , served as a between analog audio sources and emerging digital technology by leveraging the high (1-1.5 MHz) of video signals to carry PCM , with playback requiring decoding back to analog audio. Development of PCM adaptors began in the mid-1970s with prototypes like 's X-12DTC in 1974, leading to the first commercial consumer model, the PCM-1, released in 1977 for . This was followed by the professional PCM-1600 in 1978 using video tape for studio mastering. Standardization by the Electronic Industries Association of (EIAJ) in 1978 established the format for and compatibility, setting key technical parameters such as a 44.1 kHz sampling rate—derived from video frame rates (e.g., 3 samples per line × 245 lines per field × 60 Hz)—and typically 14-bit or 16-bit quantization with error correction for robust playback. This sampling frequency became the global standard for compact discs (CDs), underscoring the adaptor's role in digital audio's evolution. Consumer PCM adaptors, such as Sony's PCM-F1 (1981) and PCM-100 (1982) or Sansui's PC-X11, allowed hobbyists and audiophiles to record stereo at signal-to-noise ratios around 85-96 and below 0.01% at , often outperforming analog tape in and clarity. They supported only single stereo channels per tape due to bandwidth limits but offered portable, affordable until superseded by dedicated formats like () in 1987. Today, these devices are valued in audio preservation for digitizing early digital masters and quadraphonic experiments, though they require specialized VCRs for playback.

History and Development

Origins in Digital Audio

Pulse Code Modulation (PCM) represents analog audio signals in digital form by periodically sampling the continuous waveform and quantizing each sample's amplitude into a discrete binary code. This process involves measuring the signal's voltage at regular intervals—typically thousands of times per second—and assigning a binary value from a finite set of levels, with 16-bit quantization becoming the standard for achieving high dynamic range and low noise in professional audio applications. The resulting digital data stream preserves the audio's fidelity without the degradation inherent in analog recording methods. In the , the pursuit of high-fidelity recording faced significant challenges, as dedicated digital storage media were not yet available for widespread use. Analog tape and records suffered from , , and generational loss, prompting researchers to explore digital alternatives for broadcast and studio applications. However, PCM-generated required substantial —approximately 1-1.5 MHz for signals—to accommodate the high data rates, far exceeding the 15-20 kHz needed for analog audio. To address this, engineers leveraged the existing infrastructure of video cassette recorders (VCRs), which offered sufficient in their signal channels to store PCM data as an encoded video waveform. Sony's research into PCM for began in the early 1970s, driven by engineer Heitaro Nakajima, who joined the company in 1971 after developing an experimental PCM recorder at using video tape in the late . This work built on Nakajima's prior demonstrations, including 's 1967 mono PCM system with 30 kHz sampling and 12-bit depth recorded on video tape. In 1974, showcased its X-12DTC prototype PCM recorder at the Audio Fair, using 2-inch video tape to capture orchestral performances digitally. By 1976, demonstrated a PCM processor integrated with the VCR, highlighting the feasibility of encoding digital stereo audio onto consumer video formats. PCM adaptors emerged as a practical, cost-effective solution for recording studios seeking two-channel stereo audio without investing in specialized hardware, allowing them to utilize affordable consumer-grade VCRs such as or for storage. This approach enabled precise, noise-free archiving and editing of audio masters, paving the way for the transition to formats like the .

Commercial Introduction and Milestones

The commercial introduction of PCM adaptors began in 1977 with Sony's release of the PCM-1, the world's first processor designed for use with VCRs, enabling consumers and early adopters to record two-channel digital audio on standard video cassettes. This was followed shortly by the PCM-1600 in 1978, a professional-grade unit compatible with video recorders, which quickly became a cornerstone for studio applications due to its 16-bit/44.1 kHz capabilities and error correction features. These initial systems marked the transition from experimental to practical commercial tools, allowing high-fidelity recording on affordable and widely available video media, with capacities supporting up to two hours of stereo audio per cassette. By the early 1980s, PCM adaptors saw widespread adoption in professional audio production, particularly for (CD) mastering, where systems like the PCM-1600 and its successors facilitated the creation of masters for the nascent format. In recording studios and broadcast facilities, such as those operated by major labels, these adaptors enabled precise archiving and editing, reducing noise and distortion compared to analog tapes while leveraging existing video infrastructure. The technology's role extended to high-profile productions, underscoring its impact on the shift toward workflows in the music industry. A key milestone came in 1981 with the introduction of the consumer-oriented PCM-F1, which paired with Hi-Fi VCRs like Betamax or VHS models to bring digital recording to home audiophiles and semi-professional users, supporting both 14-bit EIAJ and 16-bit modes at 44.056 kHz sampling. This model aligned with the EIAJ (Electronic Industries Association of Japan) standard, established through collaborations among audio and video manufacturers in the late 1970s and early 1980s, which standardized PCM encoding for consumer VCRs to ensure compatibility and promote broader market penetration. These efforts culminated in the technology's integration into broadcast and studio environments, where it supported digital masters for albums and transmissions, solidifying PCM adaptors as a bridge between analog video hardware and the digital audio revolution of the decade.

Technical Principles

Audio-to-Video Encoding Process

The audio-to-video encoding process in PCM adaptors begins with the of analog audio input through an analog-to-digital (A/D) converter, which samples the signal at rates such as 44.1 kHz and quantizes it to 14 or 16 bits per sample, producing a stream of PCM . This is then formatted into structured packets or blocks, where error correction is applied by adding bits or more advanced Reed-Solomon codes to enable detection and correction of transmission errors during recording and playback. The formatted PCM data is subsequently modulated into a video-compatible waveform, typically using (FSK) or biphase mark code, which encodes binary 1s and 0s by shifting between two frequencies or by transitions that self-clock the signal without . This allows the to be embedded within the structure of a video signal, where binary values are represented as variations in levels—white for one state and black for the other—resulting in a high-frequency pattern visible on a video but carrying no color or subcarrier. The overall rate for stereo PCM in these systems is approximately 1.4 Mbps, accounting for the quantized samples, error correction overhead, and subcode . To ensure compatibility and timing accuracy, the video signal incorporates subcode channels that include track numbering, timecode, and control bits for features like pre-emphasis, allowing users to navigate recordings precisely during playback. Synchronization is achieved by adapting the video's horizontal sync pulses to frame the embedded audio data blocks, aligning the PCM packets with the video field's structure (e.g., 245 active lines per field in NTSC systems) and preventing drift between audio and video timing. On playback, a compatible PCM decoder reverses the process: it demodulates the video signal to extract the PCM data, applies error correction, and passes the digital stream through a digital-to-analog (D/A) converter to reconstruct the original analog audio. This encoding approach, while innovative for its era, relied on the video recorder's bandwidth to handle the serialized data without introducing audible artifacts, provided the tape quality was sufficient.

Sampling Frequency and Video Format Compatibility

The standard sampling frequency for PCM adaptors was 44.1 kHz, selected to ensure compatibility with both PAL (50 Hz field rate, 625 lines) and (60 Hz field rate, ) video standards while minimizing from video signals. This rate allows the to be encoded as a pseudo-video signal that fits within the active lines of each format without requiring excessive samples per line, which could introduce patterned artifacts. The mathematical basis for 44.1 kHz derives from the video field's structure, aiming for approximately three audio samples per active video line to balance data density and avoid . For systems, with 245 active lines per field and 60 fields per second, the calculation is: $44{,}100 = 60 \times 245 \times 3 For PAL systems, with 294 active lines per field and 50 fields per second, it is: $44{,}100 = 50 \times 294 \times 3 This common rate emerges from the lowest common multiple principles tied to field rates and line counts, ensuring integer sample alignment across formats; alternatively, 44.056 kHz was used for color systems to adjust for the precise horizontal scan frequency of approximately 15,734.264 Hz, yielding about 2.8 samples per line (44{,}056 / 15{,}734.264 ≈ 2.8). In PAL/, the horizontal scan of 15,625 Hz supports 44.1 kHz with roughly 2.8224 samples per line (44{,}100 / 15{,}625 = 2.8224), distributing samples evenly to prevent interference. PCM adaptors integrated with consumer video formats like and by mapping the audio data onto the video track at standard tape speeds. Early professional PCM units, such as those based on , supported 48 kHz sampling for broader bandwidth needs, but 44.1 kHz became the for consumer applications and was adopted for compact discs due to its origins in VCR-compatible recording.

Models and Manufacturers

Sony's PCM Adaptors

pioneered the development of PCM adaptors, introducing the PCM-1 in September 1977 as the world's first commercialized product for digital audio recording and playback, designed primarily for home use and compatible with VCRs. This 2-channel processor incorporated analog-to-digital (A/D) and digital-to-analog (D/A) converters, enabling users to record audio signals onto video tape with improved clarity over analog methods, though it was priced at 480,000 yen and faced limitations such as electronic humming noise and a below professional standards. For professional applications, released the PCM-1600 in March 1978, a master recording system compatible with VCRs that brought to recording studios and played a key role in software production. Operating at 16-bit resolution and a sampling frequency of 44.056 kHz, it set new benchmarks for audio fidelity and was praised for its sound quality in professional environments, such as by conductor . The PCM-F1, launched in , marked Sony's innovation in portable consumer , weighing approximately 1.5 kg and battery-powered for location recording when paired with compact VCRs like the SL-2000 or SL-F1. This model supported switchable 14-bit or 16-bit modes at 44.056 kHz sampling, allowing compatibility with both consumer Hi-Fi VCRs and professional setups, and it popularized for home users by enabling direct digitization of sources like LPs or broadcasts. In the consumer segment, models like the PCM-501ES, introduced around 1986, offered affordable 14- or 16-bit processing at 44.1 kHz sampling for home and semi-professional use with domestic VCRs, featuring built-in error correction and a compact hi-fi design measuring 430 x 80 x 350 mm. For high-end applications, the PCM-701, released in 1983, provided advanced 14- or 16-bit linear quantization with digital input/output via video jacks and a dedicated copy-out terminal for digital-to-digital transfers, achieving a of up to 90 dB and harmonic distortion as low as 0.005%. Sony's adaptors emphasized seamless integration with their ecosystem, with later models like the PCM-F1 and PCM-501ES supporting 14-bit modes for broader VCR compatibility and cost-effective entry into . These innovations, from the PCM-1's pioneering consumer accessibility to the PCM-F1's portability, established as a dominant force in early recording.

Adaptors from Other Brands

Technics introduced a range of PCM adaptors in the early , emphasizing compatibility with video formats and high-fidelity audio processing. The SV-100, launched in 1981, employed 14-bit linear quantization in line with the EIAJ standard, enabling stereo onto standard cassettes for up to three hours of playback time. Its design prioritized straightforward integration with consumer VCRs, supporting a of 2 Hz to 20 kHz and low harmonic distortion below 0.01%. Building on this, the SV-110, released around and priced at approximately ¥138,000, incorporated enhanced error correction via dedicated large-scale integration (LSI) chips—MN6601 for recording and MN6602 for playback—along with a 14-bit compound A/D and D/A converter. This model achieved a of at least 86 dB and included features like digital copying between VCRs, a rec/copy muting switch, and a fluorescent level indicator with peak hold functionality, making it suitable for both home and semi-professional use. For more affordable entry into digital recording, Technics offered the SV-P100 in 1981 as an integrated unit with a built-in VHS transport mechanism. Featuring 14-bit A/D and D/A converters, it delivered a dynamic range of 86 dB, total harmonic distortion of 0.01%, and compatibility with standard VHS cassettes for 180 minutes of stereo recording. This budget-oriented design, weighing 21 kg and consuming 80 W, simplified setup for audiophiles by combining processor and deck in one chassis while maintaining EIAJ-compliant sampling at 44.056 kHz. Other manufacturers developed PCM adaptors to compete in the , often tailoring features to specific video ecosystems. Nakamichi's DMP-100, positioned as a premium option, allowed switchable 14/16-bit resolution and focused on minimizing noise through superior analog input stages, providing a refined alternative for enthusiasts. JVC's VP-100, produced from 1984 to 1987 as part of the Crossmedia 90 system, adhered to the 14-bit EIAJ standard and facilitated seamless integration with Hi-Fi recorders, enabling alongside analog video tracks for versatile home recording. Additional models included Sharp's RX-3, a 1983 digital mastering processor using 14-bit linear quantization at a 44.056 kHz sampling rate, designed for precise audio-to-video encoding with low distortion for professional applications. Sansui's PC-X1, introduced in 1984, followed the EIAJ STC-007 format with two-channel stereo support, achieving a dynamic range exceeding 86 dB and total harmonic distortion below 0.007%, while offering NTSC-compliant video output for broad VCR compatibility. Hitachi's PCM-V300, released in 1982, provided a dynamic range over 85 dB and supported 120 minutes of recording on T-120 VHS cassettes, with line-level inputs and outputs optimized for consumer setups. A notable departure from conventional PCM encoding came from dbx with the Model 700 digital audio processor in the mid-1980s, which employed companded predictive —a variant of —to shape and reduce quantization noise. Operating at a high 644 kHz sample rate without traditional filters, it delivered approximately 14 dB more than standard 16-bit/44.1 kHz PCM systems, encoding the as an analog signal for VCR storage on formats like or . These non-Sony adaptors often emphasized brand-specific optimizations, such as Technics' integration of advanced control logic for reliable playback. However, was constrained, as many units performed best with matching VCR brands or formats—VHS models like the Technics and required compatible decks, while others aligned with —potentially causing signal degradation or tracking issues across mismatched systems.

Decline and Legacy

Factors Leading to Obsolescence

The introduction of (DAT) in 1987 marked a pivotal shift in recording technology, rendering PCM adaptors largely obsolete by providing a dedicated, portable format that eliminated the need for video cassette recorders (VCRs). DAT utilized compact 4mm cassettes measuring 73mm × 54mm × 10.5mm, enabling easier handling and random access to recordings without the dependency on bulky video equipment. In contrast, PCM adaptors required pairing with a VCR, resulting in setups that were cumbersome and less practical for professional and consumer use. Technical limitations further accelerated the decline of PCM adaptors. These devices were restricted to recording a single signal at sampling rates of 44.1 kHz or 44.056 kHz with typically 14-bit quantization (or 16-bit in advanced models with correction), lacking multi-track capabilities that emerging formats like ProDigi and began to offer for professional applications. Additionally, the reliance on VHS tapes introduced vulnerabilities such as gradual magnetic degradation over time, which compromised long-term audio fidelity due to binder hydrolysis and oxide shedding common in video cassettes. The high demands (1-1.5 MHz for signals versus 15-20 kHz for analog) confined PCM encoding to video systems, exacerbating setup complexity and limiting portability compared to DAT's integrated design. Market dynamics underscored the rapid transition. , a leading PCM adaptor manufacturer, pivoted toward with models like the PCM-7030 introduced in 1992, reflecting broader industry adoption of dedicated solutions amid declining VCR prices but rising availability of alternatives like decks. Early PCM systems, such as the 1977 PCM-1, faced high costs (480,000 yen) and usability issues like electronic noise in non-ideal environments, deterring widespread uptake even as VCRs became more affordable. By the late , 's superior (96 dB) and convenience had supplanted PCM adaptors in professional studios, with sales of professional units exceeding 5,000 globally by 1990 through distributors like HHB Communications. Full obsolescence occurred by the early 1990s, as production increasingly relied on direct digital mastering from or hard disk sources, bypassing video-based intermediates.

Impact on Audio Recording and Archiving

The introduction of PCM adaptors in the late 1970s played a pivotal role in establishing key digital audio standards that persist today. By encoding audio as video signals compatible with consumer VCRs, these devices popularized a 44.1 kHz sampling rate derived from the line frequencies of NTSC and PAL video systems—specifically, 15.75 kHz × (490/525) × 3 for NTSC and 15.625 kHz × (588/625) × 3 for PAL—allowing for efficient digital storage on readily available media. This rate, recommended in early AES discussions for professional PCM systems using video tape recorders, was adopted for the compact disc (CD) format in 1980, setting the 44.1 kHz/16-bit norm that influenced subsequent digital formats like MP3 and streaming audio. The technology also enabled the creation of the first fully digital masters for commercial albums in the early 1980s, such as those processed through professional units like the Sony PCM-1630, which converted analog mixes to digital for CD production and preserved high-fidelity stereo recordings without generational loss. In the broader audio industry, PCM adaptors democratized access to by leveraging affordable VCRs, allowing home enthusiasts and semi-professionals to capture uncompressed 16-bit audio for the first time without expensive dedicated hardware. The PCM-F1, introduced in 1981, exemplified this shift, enabling portable backups of LPs, analog tapes, and live performances on Betamax cassettes, which served as a precursor to later formats like (DAT) introduced in 1987. These adaptors were instrumental in archiving analog media, converting and reel-to-reel tapes to stable forms that resisted degradation, and thus preserving cultural artifacts from the pre-digital era in broadcast and music production. In contemporary contexts, PCM adaptors maintain relevance through restoration projects that transfer 1980s-era recordings from deteriorating video tapes to modern digital storage, as seen in professional services handling PCM-F1 masters for high-resolution reissues. Units like the PCM-F1 have garnered a collector market, with functional examples valued for their and unique sonic character, often sought by audiophiles recreating early digital workflows. Software emulations, such as plugins modeling the PCM 3348's converters, allow producers to replicate the vintage digital aesthetic in current productions, while legacy media from PCM systems continues to inform film , where BT.470 video specifications—rooted in the analog TV standards that underpinned PCM encoding—guide transfers of archival soundtracks.

References

  1. [1]
    PCM Digital Audio - Media Preserve
    A PCM adaptor has the analogue audio (stereo) signal as its input, and translates it into a series of binary digits, which, in turn, is coded and modulated into ...
  2. [2]
    Early digital tape recordings on PCM/ U-matic and Betamax video tape
    The first professional-use digital processing machine, made by SONY, was the PCM 1600. It was introduced in 1978 and used a U-matic tape machine. Later models, ...
  3. [3]
    Part 2 - The Historical Evolution Of Digital Audio Systems
    Aug 13, 2020 · The format of a PCM adaptors intended for use with Betamax and VHS cassettes was standardized by EIAJ in 1978 and probably the most well-known ...
  4. [4]
    Sony PCM F1 Digital Audio Converter | Stereophile.com
    Jun 9, 2021 · The quick and flippant answer to that is: Unbelievably Well (see Sidebar 1). Better than any analog recording including direct-to disc.
  5. [5]
    Sony's Professional Audio | Story | chapter 2
    PCM processors were interfaces that allowed recording and playing back of digital ... a Betamax video tape recorder, was able to record and play in digital.
  6. [6]
    Sony History Chapter7 Making Digital Audio a Reality
    From the early stages of the PCM-1 development, Sony had been looking for a way to record and play back sound using a digital audio disc. In 1975, Sony put the ...
  7. [7]
    Development of Digital Audio Technology
    In 1972, the BBC had developed a 13-channel PCM system to improve the sound of its TV broadcasts. The system converted the sound to PCM format at the TV ...Missing: adaptor | Show results with:adaptor
  8. [8]
    [PDF] The Dawn of Commercial Digital Recording
    Sony's. PCM systems were used commercial video-cassette systems as their storage media (the industry quickly standardized on a system of PCM-1600 digital.
  9. [9]
    The Excellent Sony PCM-1600 Digital Audio Processor
    The PCM-1 was launched in September 1977, and the Sony PCM-1600 first became available in April 1978. Both systems support two audio channels. Dropouts on ...
  10. [10]
    [PDF] The History of the Compact Disc
    The industry standard hardware to do this was the Sony PCM-1600, the first commercial video-based. 16-bit recorder, followed by the PCM-1610 and PCM-1630.
  11. [11]
    Sony PCM-F1 Review - Ken Rockwell
    The Sony PCM-F1 is a portable digital audio recorder (1981-) with 16 or 14-bit EIAJ at 44.056 ksps, NTSC or PAL output, and 2-channel simultaneous encode/ ...
  12. [12]
    PCM-F1 : Specifications - Betamax PALsite
    EIAJ standard (14-bit) and 16-bit format; Sampling frequency: 44.056kHz (NTSC), 44.1kHz (PAL/SECAM); Quantization: 14-bit linear quantization or 16-bit ...
  13. [13]
    Sony's Professional Audio | Story | chapter 3
    After the mid-1980s, CDs had become the dominant music format and Sony products such as the PCM-3348 for recording, and the PCM-1630 processor or PCM-9000 disc ...Missing: adaptor | Show results with:adaptor
  14. [14]
    None
    Summary of each segment:
  15. [15]
    [PDF] John Watkinson – The Art of Digital Audio - PCM Coder
    ... PCM adaptor. The PCM adaptor was an early solution to recording the wide ... frequency shift keying (FSK). This takes the place of the channel coder in ...
  16. [16]
    None
    ### Summary of Sony PCM-1630 Audio-to-Video Encoding Process
  17. [17]
    Explanation of 44.1 kHz CD sampling rate - Columbia CS
    Jan 9, 2008 · The allowable sampling rates in a pseudo-video system can be deduced by multiplying the field rate by the number of active lines in a field ( ...Missing: calculation PAL 25 fps
  18. [18]
    [PDF] Digital Audio Technical Committee Report
    The sampling rate for disk systems might be chosen to be either 44.1 kHz or 50.4 kHz. It is easier to design a sampling rate converter be- tween 32 kHz ( ...Missing: adaptor | Show results with:adaptor
  19. [19]
    [PDF] Compression principles and applications to Digital Speech, Audio ...
    Oct 1, 2024 · Thus we get: 6x98x75=44100. In fact, 44.1 kHz rate originated from the PCM adaptor [4]. High-quality PCM audio requires a significantly larger ...
  20. [20]
    Sample Rates and Bit Depth - AV-INFO.EU
    In 625 line / 25 Hz systems (PAL) the line frequency is ... If three samples are recorded per line the sample rate is 15.625 x 588/625 x 3 = 44.1 kHz.Missing: fps | Show results with:fps
  21. [21]
    The Extraordinary Evolution of Sony Digital Audio Processors
    Aug 18, 2024 · In 1977, Sony released the Sony PCM-1, the first commercially available Sony digital audio processor. This 2-channel processor was equipped with ...Missing: adaptor | Show results with:adaptor
  22. [22]
    Chapter10 Studio Recorders Go Digital - Sony History
    Following the development of the home-use PCM-1 digital audio processor in 1977, the professional-use PCM-1600, which used the U-Matic machine, was launched in ...
  23. [23]
    1981 Sony PCM-F1 Digital Recording Processor - Mixonline
    Sep 1, 2007 · Originally designed as a means for consumers to make digital recordings of CDs, FM broadcasts or home performances, the PCM-F1 debuted in 1981.
  24. [24]
    Sony PCM-501 ES (HSR Feb 86) - mu:zines
    a truly affordable way of digitally ...Errors · The Unit · In Use
  25. [25]
    Sony PCM-701 Digital Audio Processor (Apr. 1983)
    Sep 18, 2018 · Wow and Flutter: Below measurable limits. Input Sensitivity: 77.5 mV for 0 dB record level. Video Input and Output Levels: 1V peak-to-peak.Missing: 601 | Show results with:601<|separator|>
  26. [26]
    Technics SV-100 - stereonomono
    Specifications. Type: Digital audio processor. PCM Standard: FILE -- STC-008. Quantization: Linear 14-bit. Decoding: Linear 14-bit. Recording Time: Max. 3 hours ...<|separator|>
  27. [27]
    Technics SV-110 - Audio Database
    The SV 110 is equipped with a composite A/D and D/A converter and an LSI for recording / playback control. The A/D / D/A converter is equipped with a 14-bit ...
  28. [28]
    Technics SV-P100 Digital Audio Cassette Recorder Manual
    The Technics SV-P100 Digital Audio Cassette Recorder contains all electronic and mechanical systems for digital master recording and playback by the PCM process ...
  29. [29]
    Behind the Scenes (Apr. 1983)
    Sharp also introduced the RX-3 PCM digital mastering processor, an EIAJ 14-bit linear quantization unit with a sampling rate of 44.056 kHz and the by-now- ...
  30. [30]
    Sansui PC-X1 Tricode PCM Audio Processor Manual | HiFi Engine
    Specifications ; Sampling frequency · 44.056 kHz ; Output voltage · 250mV (line) ; Total harmonic distortion · less than 0.007% ; Dynamic range · more than 86dB.
  31. [31]
    Hitachi PCM-V300 Digital Audio Recorder (Equip. Profile, Jun. 1982)
    Apr 4, 2019 · Dynamic Range · More than 85 dB. ; Record/Playback Time · 120 minutes with T-120 (VHS) tape cassette. ; Line Input Level · 300 mV rms. ; Line Output ...
  32. [32]
    dbx 700 digital audio processor | Stereophile.com
    Jun 10, 2021 · The triangle represents a high-gain amplifier. A capacitor is connected from the output to the input. This configuration is called an integrator.Missing: sigma | Show results with:sigma
  33. [33]
    PCM Adapter for VCR - Tapeheads.net
    Jul 27, 2016 · PCM adapters were made for Beta VCR but they quickly became available for all VCR types. One example is the Sansui PC-X11.
  34. [34]
    [PDF] Tape Degradation Factors and Challenges in Predicting Tape Life
    These tapes have been very successful, but some have shown alarming degradation characterized by large quantities of a gooey residue of binder and back coating ...
  35. [35]
    Sony PCM-7030 Digital Audio Tape Recorder - Vintage Digital
    The Sony PCM-7030 conforms to the standard DAT format, providing compatibility regardless of manufacturer – including consumer models.
  36. [36]
    From Studio To Street - The Story Of DAT (SOS Nov 90)
    With DAT poised to make the leap from the professional recording studio to the high street, David Mellor looks at the benefits of the format to home recording.
  37. [37]
    The Sony PCM-1630 For Master Recordings - Vintage Digital
    The Sony PCM-1630 audio processors were widely used for the production and mastering of many of the first CDs in the early 1980s.
  38. [38]
    Digital Audio Tape Transfer - Creative Audio Works
    This recording was made in the 1980s on a Sony F1 PCM type recorder. Transferred by Creative Audio Works from the original BetaMax tape, there were multiple ...Missing: 2020s | Show results with:2020s
  39. [39]
    Mixland Debuts New 3348 TAPE Plugin - ProSoundWeb
    Nov 6, 2024 · Mixland has announced the release of 3348 TAPE, a new plugin emulation that brings the sound of the Sony PCM 3348 digital tape machine into digital audio ...Missing: adaptor | Show results with:adaptor
  40. [40]
    https://www.itu.int/rec/R-REC-BT.470/en