Pro Stock
Pro Stock is a professional class of drag racing sanctioned by the National Hot Rod Association (NHRA), featuring highly modified, production-based automobiles known as "factory hot rods" that compete in heads-up quarter-mile races without forced induction, emphasizing precision engineering and all-motor performance.[1] These vehicles must resemble street-legal production cars in appearance but are built on advanced tube chassis with four-link rear suspensions, adhering to strict rules including a minimum weight of 2,350 pounds and precise dimensional measurements to maintain competitive balance.[1] Introduced by the NHRA in 1970 as part of its professional categories to showcase modified factory muscle cars, Pro Stock debuted at the Winternationals in Pomona, California, where Bill "Grumpy" Jenkins defeated Ronnie Sox in the final round with a 9.99-second elapsed time.[2] Over its more than 50-year history, the class has featured vehicles from 10 manufacturers and 84 distinct body styles, evolving from 1970s-era Plymouth Dusters and Chevrolet Camaros to modern Dodge Chargers and Chevrolet Camaros, reflecting ongoing innovation in aerodynamics and power delivery.[3] At the heart of Pro Stock's appeal are its engines: naturally aspirated V8s limited to a maximum displacement of 500 cubic inches, equipped with electronic fuel injection and burning spec gasoline to produce over 1,300 horsepower, all while complying with environmental and safety regulations.[1] This setup enables elite drivers to achieve elapsed times in the low 6-second range and trap speeds exceeding 210 miles per hour, making Pro Stock one of the most technologically demanding categories in drag racing.[1] The class attracts a dedicated field of competitors, including the 2025 world champion Dallas Glenn alongside multi-time champions like Greg Anderson and Erica Enders, who navigate intense rivalries and frequent rule tweaks to push the boundaries of automotive performance.[4][5][6]Overview
Class Definition
Pro Stock is a professional heads-up drag racing class sanctioned by the National Hot Rod Association (NHRA), featuring highly modified production-based automobiles that maintain a factory-appearing aesthetic while competing on a quarter-mile (1,320-foot) drag strip.[1] These vehicles, often referred to as "factory hot rods," are designed to simulate high-performance street-legal muscle cars, with bodies that closely resemble current or recent production models from North American manufacturers, though constructed on purpose-built tube chassis for safety and performance.[1] The class emphasizes precision engineering and driver skill in a format where both competitors receive a simultaneous green light at the start, with the first to cross the finish line declared the winner, without dial-in handicaps.[1] The core objectives of Pro Stock revolve around achieving balanced, high-level competition through stringent technical regulations that limit engine displacement to a maximum of 500 cubic inches for V8 powerplants using electronic fuel injection and spec gasoline.[1] Minimum weight requirements, set at 2,350 pounds including driver, ensure parity among entries by countering potential power advantages, while rules mandate adherence to production-derived body dimensions and aerodynamics to preserve the class's visual appeal to street car heritage.[1] These constraints promote innovation within defined boundaries, resulting in cars capable of generating over 1,300 horsepower while maintaining the illusion of everyday production vehicles.[1] In competition, Pro Stock cars typically achieve elapsed times around 6.5 seconds and terminal speeds exceeding 210 mph, with national records standing at 6.443 seconds for elapsed time and 215.55 mph for speed as of 2025.[5][7] This level of performance underscores the class's focus on equalized racing, where minor differences in reaction time, launch, and 60-foot times can determine outcomes in eliminations. Pro Stock was introduced in 1970 as NHRA's premier factory hot rod category, evolving from modified production classes to provide a professional platform for manufacturer-supported teams.[8]Significance in NHRA Drag Racing
Pro Stock holds a prominent position within the National Hot Rod Association (NHRA) as one of four core professional categories, alongside Top Fuel, Funny Car, and Pro Stock Motorcycle, where it competes in 18 events during the 2025 NHRA Mission Foods Drag Racing Series season.[9] This schedule excludes select races like those in Chicago and Richmond, allowing Pro Stock to focus on high-profile national events while maintaining intense competition among its field of naturally aspirated factory hot rods.[9] The class's enduring fan appeal stems from its use of vehicles that closely resemble popular production muscle cars, such as Chevrolet Camaros, Ford Mustangs, Dodge Chargers, and Darts, effectively bridging everyday street car culture with extreme, high-horsepower performance.[3] These "factory hot rods" deliver razor-thin margins of victory through precision engineering and evolving technology, captivating audiences who appreciate the blend of accessibility and raw speed without the spectacle of nitro-fueled classes.[10] Since the 2010s, Pro Stock has benefited from strong manufacturer involvement, with Chevrolet, Dodge, Ford, and Toyota providing factory-backed teams that drive innovation, performance advancements, and aggressive marketing campaigns within the sport.[3] Toyota, in particular, expanded its NHRA presence into Pro Stock during this period, supporting entries like the Camry to compete alongside established American brands, fostering rivalries and technological cross-pollination.[11] Pro Stock contributes significantly to NHRA's economic vitality through its high visibility on FOX Sports broadcasts, including FS1, which have achieved record viewership—such as the 2.065 million viewers for the 2025 Texas NHRA FallNationals—drawing widespread attention to the series.[12] Lucrative sponsorships from brands like Amalie Motor Oil for events such as the Gatornationals further amplify this impact, where Pro Stock races help attract crowds of approximately 70,000 fans and generate around $9 million in direct local spending at venues like Gainesville Raceway.[13][14]History
Origins in the 1960s and 1970s
The origins of Pro Stock trace back to the mid-1960s, when it evolved from the Super Stock and Factory Experimental (FX) classes within NHRA and rival sanctioning bodies like the American Hot Rod Association (AHRA). These categories featured street-legal production cars modified for competition, with FX cars often employing altered wheelbases and high-performance factory engines to showcase Detroit's muscle car prowess during a period of intense manufacturer rivalry. By the late 1960s, heads-up racing formats in Super Stock—introduced by the United Drag Racers Association (UDRA) in 1967 and AHRA in 1968—highlighted the fastest modified production vehicles, laying the groundwork for a professional class that emphasized close-quarter battles between evenly matched factory hot rods.[15][16] Pro Stock officially launched as a professional eliminator in 1970, debuting at the NHRA Winternationals in Pomona, California, where Bill "Grumpy" Jenkins claimed the inaugural victory in his Chevrolet Camaro with a 9.99-second elapsed time. Initial NHRA rules for the class required 1968 or later North American production cars equipped with gasoline-burning V8 engines of the same make as the body, stock steel bodies (allowing fiberglass hoods and deck lids), full interiors, stock suspensions and transmissions, and a minimum weight of 2,700 pounds with a 7 pounds-per-cubic-inch break for larger displacements. These regulations aimed to preserve the appearance of showroom stock cars while permitting internal engine modifications and subframe connectors, but chassis remained stock until innovations like tube-frame designs emerged shortly after. AHRA's parallel rules in 1970 similarly focused on production-based V8s without a strict cubic-inch cap, fostering a "factory hot rod" aesthetic amid the muscle car boom.[2][8][17] Key early milestones included Ronnie Sox's dominance in the class's formative years, with nine NHRA national event victories across 1970-1972, including a win at the 1972 Supernationals aboard a Hemi-powered Plymouth Duster despite fierce competition. To counter Sox's big-block Hemi advantage and promote parity, NHRA introduced weight breaks in 1972, allowing smaller-displacement engines (such as 350-cubic-inch V8s) lighter minimum weights to compete effectively against larger mills, which spurred the adoption of compact cars like the Chevrolet Vega. This adjustment broadened participation and performance, with Jenkins pioneering the first tube-chassis Pro Stocker that year—a small-block Vega that revolutionized setup and set early elapsed time records.[18][19][20] The class faced significant challenges in balancing factory support as the muscle car era waned in the mid-1970s, influenced by the 1973 oil crisis, rising emissions regulations, and shifting automaker priorities away from high-performance production models. Manufacturers like Chrysler, Ford, and Chevrolet provided engineering and parts assistance initially, but dwindling direct involvement left independent teams to innovate, with pioneers such as Jenkins—known for his analytical approach to aerodynamics and tuning—and Sox driving the class's survival through match racing and rule adaptations. Jenkins' record-setting runs, including multiple low-9-second passes, exemplified the era's technical ingenuity amid these constraints, ensuring Pro Stock's transition from experimental roots to a staple NHRA category.[21][22][23]Evolution Through the 1980s and 1990s
During the 1980s, Pro Stock underwent significant regulatory adjustments to promote parity and performance consistency. In 1982, NHRA eliminated the controversial weight-break system based on engine displacement and standardized the category with a 500-cubic-inch engine limit and a minimum weight of 2,350 pounds, allowing teams to focus on engineering rather than chassis balancing for different powerplants.[8] These changes coincided with key innovations, such as the widespread adoption of Lenco planetary transmissions, which enabled clutchless shifting and improved driver control during high-stakes runs, reducing shift times and enhancing consistency.[23] Aerodynamic refinements also emerged, with teams experimenting with streamlined bodywork and one-piece fiberglass panels to minimize drag, laying the groundwork for more uniform designs in subsequent years.[23] In the 1990s, NHRA continued refining rules for competitive balance, gradually increasing minimum weights for specific body styles while maintaining the 500-cubic-inch engine cap.[24] Trials with electronic fuel injection systems began appearing in limited applications, though full mandatory adoption would come later, as teams sought incremental gains in throttle response over traditional carburetors.[25] A pivotal milestone occurred in 1987 with the formal introduction of Pro Stock Motorcycle as a professional category, separating it from car-based entries and expanding the class's appeal with purpose-built bikes capable of low-7-second elapsed times.[26] Performance benchmarks advanced steadily, with elapsed times dropping from the low 7.0-second range in the early 1980s to the first sub-7.0-second NHRA pass of 6.98 seconds by Kurt Johnson in 1994, and further into the high 6.8s by the late 1990s through optimized tuning and traction enhancements.[27] The era also saw the rise of dominant independent teams, exemplified by KB Racing, which entered Pro Stock in the early 1990s through partnerships and quickly established itself as a powerhouse with innovative engine programs and strategic driver lineups.[28] Culturally, factory involvement waned following the 1970s oil crises, as automakers scaled back racing budgets amid economic pressures and shifting priorities toward fuel efficiency, leading to a proliferation of independent tuners like Warren Johnson and Bob Glidden who relied on private sponsorships and grassroots innovation to sustain the class's vitality.[29]Modern Developments from 2000 to Present
In the early 2000s, Pro Stock teams increasingly integrated advanced data acquisition systems, such as RacePak loggers, to analyze runs in real-time and refine engine tuning, suspension setup, and driver reactions, marking a shift toward more data-driven strategies in the class.[30] These systems, building on late-1990s innovations, became essential for maintaining competitiveness amid tightening performance margins. By 2015, NHRA announced major rule updates effective for the 2016 season, mandating electronic fuel injection (EFI) systems from Holley to replace carburetors, aiming to modernize the category and align it with contemporary automotive technology while capping engine RPM at 10,500 to control costs and parity.[31] The EFI transition, which included redesigned hoods with OEM-style air intakes positioned below the front grille, initially challenged teams but ultimately improved throttle response and consistency.[25] The entry of Toyota into Pro Stock in 2016 with the Camry body style reinvigorated manufacturer rivalries, introducing fresh competition against established Chevrolet, Dodge, and Ford entries and boosting fan interest through diversified factory-backed programs.[3] This period also saw performance gains, with elapsed times dipping below 6.5 seconds by the late 2010s—exemplified by Erica Enders' national record of 6.450 seconds in 2022—and terminal speeds surpassing 215 mph, as in Enders' 215.55 mph mark from 2014, reflecting ongoing optimizations in aerodynamics and power delivery.[32] In 2025, VP Racing Fuels became the official spec fuel supplier for Pro Stock, mandating C-25 unleaded racing gasoline to ensure uniformity and safety across teams.[33] Recent rule tweaks from 2023 to 2025 focused on air induction systems to promote parity, with NHRA specifying accepted products and configurations via updates to the Pro Stock Air Induction Requirements, including restrictions on pressure manipulation devices to prevent advantages. The 2025 schedule expanded to 18 national events for Pro Stock, excluding Chicago and Richmond to manage logistics, while safety measures were enhanced following tire-related scrutiny, including prohibitions on non-standard beadlock liner wheels that could offer unauthorized performance edges under the guise of safety.[34][35] Ongoing challenges include high operational costs—estimated at over $400,000 per season for a competitive team—posing barriers to new entrants and prompting NHRA efforts to balance escalating speeds (now routinely over 215 mph, with Greg Anderson's 2025 ET record of 6.443 seconds at 212.06 mph) against affordability and class viability, especially amid Toyota's announced departure from NHRA after 2025. In 2025, Dallas Glenn clinched his first NHRA Pro Stock World Championship.[36][5][6]Technical Regulations
Engine Specifications
Pro Stock engines are limited to a maximum displacement of 500 cubic inches (8.2 L) and must be naturally aspirated V8 configurations with a single in-block camshaft and pushrod-operated overhead valves arranged in a 90-degree bank angle. These powerplants are based on production-oriented original equipment manufacturer (OEM) blocks, such as Chevrolet's small-block derivatives featuring 4.40-inch bore spacing, to maintain parity among competitors while allowing modifications for high-performance applications. Internal components include high-strength forged steel connecting rods and lightweight forged pistons, with each piston required to weigh at least 460 grams and piston pins at 135 grams to ensure durability under extreme loads. Compression ratios typically range from 15:1 to 16:1, enabling efficient combustion on racing gasoline without forced induction. The fuel system employs electronic fuel injection (EFI) with one injector per cylinder, mandated since 2016, and utilizes only NHRA-approved VP Racing Fuels gasoline without any additives or oxygenates. A maximum auxiliary fuel cell capacity of 1.5 gallons is permitted, certified to SFI Spec 28.1 and positioned ahead of the radiator for safety, with total capacity limited to support quarter-mile runs (approximately 1-2 gallons based on ~1 gallon consumption per pass). Air induction is restricted to naturally aspirated setups without superchargers, turbochargers, or nitrous oxide, promoting equal airflow through standardized throttle body or port injection systems; in 2025, NHRA mandated the removal of all hood scoops, standardizing air intake to snorkel systems. Cooling systems rely on conventional water-based setups, though exact mixtures are team-specific and not regulated beyond general safety requirements. These engines produce approximately 1,400 horsepower and over 800 lb-ft of torque, peaking at the NHRA-imposed redline of 10,500 rpm, which underscores their emphasis on high-revving efficiency rather than displacement alone. Valve trains feature aggressive profiles with lifts exceeding 1.2 inches and rocker-arm ratios between 1.75:1 and 2.00:1, supported by coil springs exerting over 1,500 pounds of open pressure to handle the rapid cycling. Maintenance protocols ensure fairness and safety, with engines serialized or identified by NHRA officials at each event to prevent swaps during competition. An oil-retention device is mandatory to contain lubricants in case of failure, and all components must comply with blueprinting tolerances outlined in the rulebook. Parity is further enforced through the strict cubic-inch limit and prohibition of non-automotive or exotic enhancements, allowing teams to focus on tuning and reliability within these constraints.Chassis and Body Requirements
Pro Stock cars utilize a custom tubular steel chassis constructed from minimum 1.00-inch by 0.058-inch 4130 chromoly or equivalent tubing, designed to meet SFI Specification 25.1 for certification, which requires annual recertification by an SFI-approved inspector and the attachment of a serialized sticker to the roll cage.[37] The chassis incorporates a mandatory roll cage compliant with SFI Specs 25.1 through 25.5, depending on the configuration, along with padding per SFI Spec 45.1 in areas where the driver's helmet may contact the structure.[37] A minimum wheelbase of 104 inches (maximum 105 inches, with no more than 1-inch variation front to rear) is enforced to maintain stability and consistency, with stock framerails required to retain original equipment manufacturer (OEM) dimensions for authenticity; for 2025, wheelie bar lengths were shortened to NHRA-specified dimensions to enhance stability.[37] The body must closely resemble production vehicles, featuring OEM-appearing sheet metal for key components such as the hood, doors, and fenders, which must use unaltered factory stampings to preserve stock contours and appearance.[37] Approved body styles are limited to specific recent models, including the 2019 and later Chevrolet Camaro and Dodge Challenger, among other NHRA-approved 2009+ two-door or four-door coupes and sedans, with full-bodied designs that include two functional doors extending to the firewall.[37] Composites are prohibited except for roofs, ensuring the overall structure remains metal or fiberglass to mimic factory aesthetics, while magnesium components are banned throughout.[37] Safety features include mandatory SFI-rated fire suits (Spec 3.2A/5) for drivers and parachutes required for vehicles capable of speeds over 150 mph, with dual parachutes positioned such that the rear of the pack is not forward of the spoiler tip.[37] Weight distribution rules mandate a 45-55% front-to-rear bias to promote balanced handling, enforced through a minimum rear axle weight of 1,100 pounds at the conclusion of a run and overall minimum vehicle weight of 2,350 pounds including the driver for gasoline-powered cars in 2025.[37] Ballast is permitted but limited to a maximum of 30 pounds in the front compartment, secured with specific bracket specifications to prevent shifting during competition.[37] These requirements ensure the cars remain close to production norms while allowing for racing optimization. Aerodynamic elements are strictly regulated to maintain a stock-like profile, with functional stock grilles and headlights required, and no aerodynamic aids beyond OEM specifications such as spoilers.[37] Rear spoilers, if present, must conform to factory designs without adjustable features during a run, and wind tunnel testing is prohibited to preserve the class's emphasis on production-derived performance.[37]Drivetrain and Suspension
Pro Stock vehicles are configured exclusively as rear-wheel-drive cars, utilizing a manual transmission to transfer power from the engine to the rear axle. The approved transmissions are limited to Liberty or Brinn five-speed manual units, which operate without a clutch pedal during shifts for rapid gear changes under high-rpm conditions; automatic transmissions are explicitly prohibited under NHRA rules.[37][38] These transmissions pair with carbon-fiber driveshafts that meet SFI Specification 43.1 for durability and weight reduction, ensuring efficient power delivery while complying with safety standards for vehicles capable of extreme acceleration.[37] The rear differential is typically locked or limited-slip, with aftermarket axles featuring at least 40 splines to handle torque loads without failure during launches.[37] The suspension system emphasizes stability and traction for quarter-mile runs, featuring a four-link rear setup mounted to a solid axle, which allows precise control over wheel movement and weight transfer. Adjustable coilover shocks are standard at all four corners, providing tunable damping and ride height to optimize launch performance; the front suspension uses a non-independent design, such as control arms, to maintain chassis rigidity without the complexity of independent components.[39] Anti-squat geometry in the four-link configuration is calibrated to minimize rear-end lift, targeting consistent 60-foot times in the 1.0- to 1.1-second range typical for the class.[39] Launch procedures rely on mechanical aids rather than electronic intervention, with two-step rev limiters integrated into the ignition system to hold engine speed at a preset rpm (often around 7,000-8,000) during staging until the driver releases the throttle. Line locks engage the front brakes for burnouts, heating the rear tires while preventing forward creep, and are activated via a driver-controlled switch.[40] For 2024-2025, clutch packs must be multi-disc assemblies certified to SFI Specifications 1.1, 1.2, 1.3, or 1.4, with a maximum of three discs and a minimum 6-inch diameter, ensuring progressive engagement to protect the drivetrain from shock loads at launch.[37] Teams perform track-specific adjustments to suspension and drivetrain components, such as altering four-link bar angles for traction modulation or recalibrating clutch slip rates based on track conditions, to achieve optimal hookup without exceeding NHRA limits. Active electronics are banned beyond data logging systems like Racepak units, which record parameters such as rpm and suspension travel solely for post-run analysis, maintaining the class's emphasis on driver skill over automated aids.[37]Brakes, Fuel, and Tires
In Pro Stock drag racing, braking systems are designed for high-performance stopping under NHRA regulations, emphasizing reliability and driver control without electronic aids. Four-wheel hydraulic disc brakes are mandatory, utilizing carbon-fiber rotors paired exclusively with carbon-fiber-specific brake pads on both front and rear axles to reduce weight and manage heat during repeated runs. A dual master cylinder system is required for redundancy, with steel brake lines protected in critical areas, but anti-lock braking systems (ABS) and automated braking functions are prohibited to ensure direct mechanical operation by the driver. Additionally, parachutes serve as a supplementary deceleration device, with dual units mandatory for vehicles exceeding 150 mph; these must be deployed manually or via an assisted launcher system, spaced no more than 24 inches apart, and packed in bright-colored pilot chutes since 2022.[37] Fuel systems in Pro Stock adhere to strict safety and performance standards, focusing on gasoline-based power delivery without alcohol since the class's transition in the mid-2000s. NHRA-accepted racing gasoline is required, with VP Racing Fuels' C-25 designated as the official spec fuel starting in 2025 for all Pro Stock events, offering consistent octane and oxygenation for naturally aspirated engines. The auxiliary fuel cell is limited to a maximum of 1.5 gallons (e.g., Jaz models 220-015-0, 220-115-01, or 220-315-01) mounted forward of the radiator between the frame rails for ballast and safety, with total capacity supporting quarter-mile runs. Cells must feature SFI Spec 28.1-compliant foam bladders, rollover valves, pressure caps, and venting, enclosed in a minimum 1.25-inch OD x 0.065-inch chromoly tube frame if outside the body; mechanical fuel pumps and steel or steel-braided lines are standard, with no extra tanks or cooling/heating allowed. Fire suppression systems are obligatory, consisting of a minimum 5-pound SFI Spec 17.1 unit with nozzles directed at the driver and engine compartments, activated manually to also trigger a master cutoff switch.[37][33] Tire specifications prioritize traction and safety on the drag strip, with Goodyear as the exclusive NHRA-approved manufacturer for Pro Stock. Rear tires are restricted to 9-inch-wide slicks, typically sized around 33.0 x 9.0-15 or equivalent, mounted on 15-inch beadlock wheels to handle the class's sub-7-second quarter-mile passes. Front tires are limited to a maximum 25-inch height and 7-inch width (e.g., 18 x 7 configuration) for aerodynamic clearance, with overall tire fender gaps not exceeding 4 inches front and 5.5 inches rear. To mitigate high-speed failures, tire growth is regulated to no more than 1.5% of the original diameter under load, and all tires must meet NHRA-accepted standards without defects, including a minimum 1/16-inch tread depth; inner liners are prohibited in Pro Stock to avoid performance advantages, as evidenced by disqualifications for non-compliance. These components integrate with suspension for optimal traction but remain distinct as consumable safety elements.[37]Competition and Achievements
NHRA World Championships
The NHRA Pro Stock World Championships are awarded annually to the driver accumulating the most points across the regular season and playoffs in the NHRA Mission Foods Drag Racing Series, with the champion determined at the season-ending event in Pomona, California.[41] The class has crowned a world champion every year since its inception in 1970, showcasing intense manufacturer rivalries and driver skill in heads-up elimination racing.[42] Prior to 2007, the championship was decided by full-season points accumulated over all national events, emphasizing consistency throughout the year. In 2007, the NHRA introduced the Countdown to the Championship playoffs to heighten late-season drama, qualifying the top 10 drivers after the regular season (post-U.S. Nationals) and resetting their points with a substantial lead for higher seeds—originally over six playoff races, reduced to four starting in 2017. This format awards bonus points to seeds (e.g., 576 for No. 1 in recent years, decreasing by 48 per position) before the playoffs begin, where event points mirror the regular season but culminate in a high-stakes finale.[43][44] In the 2025 season, Pro Stock featured an 18-race schedule, skipping two national tour events (Chicago and Richmond) while participating in all others. Points are awarded per elimination round: 100 for a win, 80 for runner-up, 60 for semifinal loss, 40 for quarterfinal loss, and 20 for first-round loss (doubled at select events like Indianapolis and the Pomona finale, e.g., 150 for a win). Additional points come from qualifying position (8 for No. 1, decreasing to 1 for No. 16) and performance bonuses for low elapsed times. During the Countdown, the top 10 receive the points reset, and the four playoff races use the same structure, with the Pomona finale deciding the title among the remaining contenders. The 2025 In-N-Out Burger NHRA Finals were canceled due to rain on November 16, 2025, and Dallas Glenn was declared the champion.[9][41][45] In case of ties, tiebreakers prioritize head-to-head wins across the season, followed by most rounds advanced, lowest average qualifying position, and quickest average qualifying elapsed time.[46] The following table lists all NHRA Pro Stock world champions from 1970 to 2025, highlighting eras of dominance by legends like Bob Glidden (10 titles, a record) and modern stars like Erica Enders (six titles).[42][6]| Year | Champion |
|---|---|
| 1970 | Ronnie Sox |
| 1971 | Mike Fons |
| 1972 | Bill Jenkins |
| 1973 | Wayne Gapp |
| 1974 | Bob Glidden |
| 1975 | Bob Glidden |
| 1976 | Larry Lombardo |
| 1977 | Don Nicholson |
| 1978 | Bob Glidden |
| 1979 | Bob Glidden |
| 1980 | Bob Glidden |
| 1981 | Lee Shepherd |
| 1982 | Lee Shepherd |
| 1983 | Lee Shepherd |
| 1984 | Lee Shepherd |
| 1985 | Bob Glidden |
| 1986 | Bob Glidden |
| 1987 | Bob Glidden |
| 1988 | Bob Glidden |
| 1989 | Bob Glidden |
| 1990 | Darrell Alderman |
| 1991 | Darrell Alderman |
| 1992 | Warren Johnson |
| 1993 | Warren Johnson |
| 1994 | Darrell Alderman |
| 1995 | Warren Johnson |
| 1996 | Jim Yates |
| 1997 | Jim Yates |
| 1998 | Warren Johnson |
| 1999 | Warren Johnson |
| 2000 | Jeg Coughlin Jr. |
| 2001 | Warren Johnson |
| 2002 | Jeg Coughlin Jr. |
| 2003 | Greg Anderson |
| 2004 | Greg Anderson |
| 2005 | Greg Anderson |
| 2006 | Jason Line |
| 2007 | Jeg Coughlin |
| 2008 | Jeg Coughlin |
| 2009 | Mike Edwards |
| 2010 | Greg Anderson |
| 2011 | Jason Line |
| 2012 | Allen Johnson |
| 2013 | Jeg Coughlin Jr. |
| 2014 | Erica Enders-Stevens |
| 2015 | Erica Enders-Stevens |
| 2016 | Jason Line |
| 2017 | Bo Butner |
| 2018 | Tanner Gray |
| 2019 | Erica Enders |
| 2020 | Erica Enders |
| 2021 | Greg Anderson |
| 2022 | Erica Enders |
| 2023 | Erica Enders |
| 2024 | Greg Anderson |
| 2025 | Dallas Glenn |
All-Time Wins Leaders
Greg Anderson holds the record for the most NHRA Pro Stock national event wins with 112 as of November 2025, a testament to his sustained dominance since joining the class full-time in 2001.[47] His career spans multiple eras of technical evolution, including the shift to smaller-displacement engines in the 2000s and the rise of team-based operations, where he has piloted cars for KB Racing, securing five world championships (2003, 2004, 2010, 2021, 2024).[47] Anderson's win rate hovers around 22% across his starts, reflecting elite consistency in a field where top performers typically claim 20–25% of events.[47]| Rank | Driver | Career Wins | Active |
|---|---|---|---|
| 1 | Greg Anderson | 112 | Yes |
| 2 | Warren Johnson | 97 | No |
| 3 | Bob Glidden | 85 | No |
| 4 | Jeg Coughlin Jr. | 65 | Yes |