Fact-checked by Grok 2 weeks ago

Project Lyra

Project Lyra is a feasibility study coordinated by the Initiative for Interstellar Studies (i4is) to design spacecraft missions capable of intercepting interstellar objects transiting the Solar System, such as 1I/ʻOumuamua and 2I/Borisov, by leveraging near-term propulsion technologies including chemical rockets, gravity assists, and advanced concepts like solar sails.^[1] Initiated on 30 October 2017, mere days after the discovery of ʻOumuamua on 19 October 2017, Project Lyra emerged as a response to the unprecedented opportunity to study extrasolar material up close, focusing on missions that could achieve flybys or even rendezvous despite the objects' high hyperbolic excess velocities of approximately 26 km/s relative to the Sun.^[1] The project, led by a team including Andreas M. Hein, Nikolaos Perakis, and T. Marshall Eubanks from i4is and affiliated institutions, evaluates the technical and logistical challenges of such pursuits, emphasizing rapid-response architectures suitable for future detections.^[1] Central to Project Lyra are innovative trajectory designs that combine planetary gravity assists with high-energy Oberth maneuvers to build sufficient velocity. Early concepts targeted launches in 2021–2028 using vehicles like the Falcon Heavy or Space Launch System, incorporating Jupiter flybys and solar Oberth maneuvers to achieve delta-v requirements of 18–52 km/s, with trip times ranging from 8 to 26 years and arrival speeds up to 30 km/s. Later studies proposed alternatives avoiding solar proximity risks, such as a 2026 Venus-Earth-deep space maneuver-Earth-Mars-Jupiter sequence with a Jupiter Oberth maneuver, yielding a 31-year flight duration and 15.8 km/s total delta-v for a 115–241 kg payload.^[2]^[3] Propulsion options span conventional solid rocket motors (specific impulse of 292 s) for impulsive boosts, electric sails for deceleration, and speculative laser-illuminated sails capable of reaching 55 km/s, all while prioritizing technologies like the Parker Solar Probe's heat shield for thermal protection.^[1] The project's contributions include several peer-reviewed publications that have advanced interstellar precursor mission design, such as the foundational 2018 Acta Astronautica paper outlining initial intercepts and the 2020 follow-up identifying post-2024 opportunities with reduced complexity.^[4]^[5] Ongoing work, as of 2025, explores synergies with emerging launchers like SpaceX's Starship to enhance payload capacity and enable more ambitious rendezvous scenarios, underscoring Project Lyra's role in preparing for the next interstellar visitor.^[1]

Background and Motivation

Discovery of Interstellar Objects

Interstellar objects are astronomical bodies that originate outside the Solar System and pass through it on unbound trajectories, typically identified by their hyperbolic orbits with eccentricities greater than 1, indicating they possess sufficient velocity to escape the Sun's gravitational influence without being captured. These objects are distinguished from solar system bodies by their high inbound speeds relative to the Sun, often exceeding 20 km/s, and lack of closed orbital paths, as confirmed by precise astrometric observations.^[6] The first confirmed interstellar object, 1I/'Oumuamua, was discovered on October 19, 2017, by the Pan-STARRS1 telescope at Haleakala Observatory in Hawaii, initially cataloged as a minor planet but soon reclassified due to its trajectory.^[6] Observations revealed an elongated, cigar-shaped form approximately 100–200 meters in length, with a reddish hue suggesting organic-rich surface materials, and it exhibited no detectable cometary activity such as a dust coma or gas emissions.^[6] Notably, 'Oumuamua displayed anomalous non-gravitational acceleration, deviating from a purely gravitational orbit by about 4.92 × 10^{-6} m/s², attributed to outgassing of volatile ices like hydrogen or nitrogen rather than traditional comet jets.^[7] Its inbound speed was around 26 km/s, and post-perihelion, it followed an outbound path toward the constellation Pegasus, rapidly receding from the inner Solar System.^[6] The second interstellar object, 2I/Borisov, was identified on August 29, 2019, by amateur astronomer Gennadiy Borisov using a 0.65-meter telescope at the MARGO Observatory in Crimea.^[8] Unlike 'Oumuamua, Borisov exhibited clear cometary activity, including a prominent coma and tail driven by sublimating ices as it approached perihelion, confirming its comet-like nature.^[8] Spectroscopic analysis showed similarities to solar system comets in overall composition, such as the presence of water ice and common volatiles, but with notable differences including a depletion in C₂ (dicarbon) molecules^[9] and an unusually high abundance of carbon monoxide—up to 26 times richer than typical solar system comets at similar distances.^[10] Its nucleus measured about 0.4–1 km in diameter, with an inbound speed of approximately 32 km/s, and it is outbound toward the constellation Telescopium.^[8] The third known interstellar object, comet 3I/ATLAS (also designated C/2025 N1), was discovered on July 1, 2025, by the NASA-funded Asteroid Terrestrial-impact Last Alert System (ATLAS) survey. It is an active interstellar comet featuring a solid icy nucleus surrounded by a coma of gas and dust. Estimates place the nucleus diameter between 0.4 and 5.6 km. Its hyperbolic excess velocity is approximately 58 km/s, the highest recorded for an interstellar object. The comet reached perihelion on October 30, 2025, at 1.4 AU from the Sun, with its closest approach to Earth at 1.8 AU.^[11] The Vera C. Rubin Observatory's Legacy Survey of Space and Time (LSST), which commenced operations in mid-2025, is expected to detect around one interstellar object per year, or dozens over its 10-year mission, due to its wide-field imaging capabilities, enabling early identification of inbound trajectories for potential study.^[12] These detections will highlight the transient nature of such visitors, whose outbound paths—often at speeds of 20–40 km/s—underscore the urgency for rapid mission planning to enable close encounters before they exit the Solar System.

Rationale for a Dedicated Mission

Interstellar objects like 1I/'Oumuamua represent pristine samples from other star systems, offering unprecedented opportunities to study exoplanet formation processes, organic chemistry, and the diversity of extrasolar environments without requiring humanity to undertake interstellar travel ourselves.^[13] As the nearest macroscopic sample of such material, 'Oumuamua's hyperbolic trajectory and anomalous properties—such as its elongated shape and non-gravitational acceleration—suggest it could reveal isotopic signatures distinct from solar system bodies, potentially shedding light on the ejection mechanisms from distant planetary systems or even speculative possibilities like artificial origins.^[13] These objects provide a window into the galactic thin disk or nearby stellar associations, enabling comparisons with known exoplanetary architectures detected via remote methods.^[14] Remote observations by ground- and space-based telescopes, including Hubble and Spitzer, have been severely limited by 'Oumuamua's rapid motion and faintness post-discovery, yielding only broad constraints on its size (less than 200 meters in its longest dimension) and reddish surface coloration without resolving detailed composition or internal structure. Even advanced instruments like the James Webb Space Telescope (JWST), operational since 2022, lack the angular resolution needed for in-situ analysis of such fast-moving, distant targets, as 'Oumuamua's outbound velocity precluded high-fidelity spectroscopic data on volatiles or surface features. These limitations underscore the necessity of a dedicated spacecraft for close-range instrumentation to achieve the precision required for transformative insights. A mission to an interstellar object holds potential for paradigm-shifting discoveries, such as detecting water ice, complex organics, or outgassing mechanisms that explain 'Oumuamua's acceleration without visible coma, with implications for panspermia—the hypothesis that life-bearing materials could travel between stars via such wanderers. The urgency is acute, as 'Oumuamua is now approximately 45 AU from the Sun in November 2025, receding at a relative velocity of about 26 km/s, making future intercepts increasingly challenging and emphasizing the narrow window for accessing extrasolar material directly. Project Lyra, initiated in 2017 in response to 'Oumuamua's discovery, addresses this imperative by exploring feasible mission concepts to maximize scientific return from these rare visitors.^[13]

Project History

Initiation and Organization

Project Lyra was initiated on 30 October 2017 by the Initiative for Interstellar Studies (i4is), a UK-based nonprofit organization dedicated to advancing research in interstellar exploration.^[1] The project emerged shortly after the discovery of the interstellar object 1I/'Oumuamua, aiming to explore the feasibility of spacecraft missions to such objects using existing technologies.^[15] Key leadership came from researchers Adam Hibberd and Andreas M. Hein, both affiliated with i4is, along with collaborators from international partners.^[16]^[17] Early contributions included references to studies from institutions like NASA's Jet Propulsion Laboratory (JPL), which informed the project's foundational mission architectures for interstellar precursor missions.^[18] The initial scope focused on assessing mission feasibility to 'Oumuamua through near-term chemical propulsion systems combined with gravity assists, emphasizing practical launch windows and trajectory options within the subsequent decade. The organizational framework adopted a collaborative model, incorporating open-source dissemination of findings via arXiv preprints to encourage global input from the scientific community. i4is workshops and technical discussions further supported this structure, fostering interdisciplinary exchanges among astronomers, engineers, and propulsion experts.^[1]

Key Milestones and Publications

Project Lyra's foundational study was outlined in the initial paper "Project Lyra: Sending a Spacecraft to 1I/'Oumuamua (former A/2017 U1), the Interstellar Asteroid," published in Acta Astronautica in 2019, which proposed a baseline Solar Oberth mission architecture with a potential 2021 launch window and an 8-10 year transit time to the target.^[4] Following the discovery of the second interstellar object, 2I/Borisov, in 2019, the project expanded its scope to include missions to cometary interstellar visitors; this was detailed in the 2021 Acta Astronautica paper "Sending a Spacecraft to Interstellar Comet 2I/Borisov," which analyzed feasible trajectories leveraging near-term propulsion for rendezvous opportunities. Subsequent research addressed extended timelines for reaching 1I/'Oumuamua, as presented in the 2020 Acta Astronautica publication "Project Lyra: Catching 1I/'Oumuamua – Mission Opportunities After 2024," an arXiv preprint from 2019 that identified post-2024 launch windows, including a 2028 departure yielding a 26-year transit via gravitational assists.^[5] In 2022, the project advanced alternative pathways without relying on a high-risk Solar Oberth maneuver, as explored in the Acta Astronautica paper "Project Lyra: A Mission to 1I/'Oumuamua without Solar Oberth Manoeuvre," which utilized a Jupiter Oberth maneuver for a 2028 launch, reducing thermal challenges while maintaining viable encounter speeds.^[19] By 2023, focus shifted to launch vehicle feasibility in the arXiv preprint "Project Lyra: The Way to Go and the Launcher to Get There," which evaluated heavy-lift options including SpaceX's Falcon Heavy and Starship, determining that Starship's payload capacity could enable missions with C3 values up to 100 km²/s², sufficient for aggressive Oberth transfers.^[20] In 2024 and 2025, i4is publications further integrated Starship into mission designs, with a November 2025 blog post assessing its potential for Project Lyra by simulating refueling-enabled departures that achieve the required hyperbolic excess velocities for interstellar pursuits.^[21] Media coverage, including YouTube animations depicting the Solar Oberth maneuver's dynamics, raised public awareness of these concepts, though as of late 2025, no formal endorsements from agencies like NASA or ESA have been announced.^[22]

Scientific Objectives

Primary Research Goals

Project Lyra's primary research goals center on unlocking the secrets of interstellar objects by conducting in-situ observations to characterize their fundamental nature, origins, and implications for extrasolar planetary systems. A core objective is to perform detailed composition analysis to determine whether these objects harbor pre-solar organics, water ice, or exotic materials from other stellar systems, providing direct samples of material untainted by Solar System processes. Spectroscopic measurements would reveal elemental abundances, isotopic ratios, and potential organic compounds, contrasting with known solar system bodies like trans-Neptunian objects (TNOs). This analysis aims to clarify if interstellar objects like 1I/'Oumuamua exhibit chemical signatures akin to those in the Local Interstellar Medium or unique extrasolar chemistries.^[13]^[23] Another key goal involves measuring physical properties to infer formation environments, including shape, density, tumbling rates, and surface features such as regolith texture or icy mantles. High-resolution imaging would quantify dimensions—potentially confirming 'Oumuamua's elongated form with an aspect ratio exceeding 6:1—and assess rotational dynamics, which could indicate tidal disruptions or collisions in the object's natal system. These observations would test hypotheses about interstellar object evolution, distinguishing between asteroidal, cometary, or hybrid origins.^[13]^[17] Dynamical studies form a critical pillar, particularly investigating non-gravitational accelerations, such as the ~5 × 10^{-6} m/s² anomaly observed in 'Oumuamua's trajectory, to discern mechanisms like outgassing or radiation pressure. By monitoring trajectory perturbations during close approach, the mission would quantify these effects and search for associated phenomena like gas emissions. This would resolve debates on natural origins and refine models of interstellar travel.^[13]^[7] In comparative astrobiology, Project Lyra seeks to assess habitability clues by detecting amino acids, complex organics, or prebiotic materials absent in solar system analogs, evaluating if interstellar objects could seed life across systems. Broader impacts include calibrating exoplanet formation models with real extrasolar data and advancing interstellar exploration paradigms. These goals collectively position the mission as a bridge to understanding galactic material exchange and planetary diversity, applying to future interstellar objects including recent detections like 3I/ATLAS as of 2025.^[17]^[23]^[24]

Targeted Observations and Instrumentation

Project Lyra proposes a suite of instrumentation optimized for high-speed flyby encounters with interstellar objects, enabling detailed in-situ analysis despite relative velocities exceeding 20 km/s. The baseline payload emphasizes compact, low-mass instruments capable of remote sensing during the brief observation window, typically lasting hours, to characterize the object's composition, structure, and physical properties.^[25] For imaging, the mission envisions high-resolution visible and infrared cameras analogous to the Long Range Reconnaissance Imager (LORRI) on New Horizons, which would provide panchromatic imaging at resolutions of approximately 10 m/pixel from distances of tens to hundreds of kilometers. These cameras would facilitate 3D surface mapping and shape reconstruction, capturing the irregular morphology observed in 'Oumuamua, such as its elongated form estimated at 100-1000 m in length. Infrared capabilities would extend to thermal mapping, revealing surface temperature variations and potential outgassing sites.^[23]^[25] Spectroscopic instruments form the core of the payload for compositional analysis, including ultraviolet-visible-near-infrared (UV-Vis-NIR) spectrometers to detect minerals, organics, and volatiles. Drawing from heritage designs like the Ovenized Visible-IR Spectrograph (OVIRS) and Thermal Emission Spectrometer (OTES) on OSIRIS-REx, these would operate across 0.2-4 μm to identify signatures such as silicates, carbon-bearing compounds, and water ice, building on ground-based detections of CN and H₂O in 2I/Borisov. Mid-infrared extensions (5-15 μm) would probe thermal emissions for dust and ice diagnostics, prioritizing point spectroscopy to maximize signal during the fast encounter.^[23] In-situ sensors complement remote observations with a mass spectrometer, inspired by hypervelocity impactor concepts, would analyze ejected material from a potential subsurface probe or natural outgassing, measuring isotopic ratios to distinguish extrasolar origins. These instruments enable contextual data on the object's interaction with solar wind, absent in ground-based studies.^[25]^[23] The proposed payload mass ranges from 10-50 kg for minimal configurations using near-term launchers like Falcon Heavy, accommodating 2-3 core instruments plus navigation cameras, though advanced architectures could support up to 100 kg with impactors. Power requirements, estimated at 20-50 W, would rely on radioisotope thermoelectric generators (RTGs) for reliability in the outer solar system, as solar panels face challenges from proximity in solar Oberth trajectories reducing efficiency at <0.1 AU.^[25]^[26] Data collection strategies prioritize real-time transmission via high-gain antennas during the encounter phase, supplemented by onboard storage for post-encounter relay. If deceleration technologies like electric sails prove feasible, enhancements could include extended observation times or sample capture mechanisms, allowing multi-day studies beyond the baseline flyby. However, these remain non-baseline due to propulsion constraints.^[25]

Mission Architectures

Solar Oberth Trajectory

The Solar Oberth Trajectory represents the baseline high-energy mission architecture for Project Lyra, designed to intercept interstellar objects such as 1I/'Oumuamua by leveraging gravitational assists and a powered maneuver near the Sun. The sequence begins with an Earth launch, followed by a Jupiter flyby for a gravity assist to redirect the spacecraft toward a close solar approach, reaching perihelion at 3-6 solar radii (approximately 5 solar radii in optimized designs). At this point, the spacecraft performs a powered burn using chemical propulsion, exploiting the Oberth effect to maximize velocity gain before departing outbound to the target. This path enables the spacecraft to achieve the hyperbolic excess velocities required to catch up with fast-moving interstellar visitors, with the Jupiter assist providing an initial boost of several kilometers per second while minimizing launch energy demands.^[13]^[27] The Oberth effect is applied during the solar perihelion burn, where the high orbital speed—reaching tens of kilometers per second—amplifies the efficiency of the propulsion Δv, yielding an effective velocity gain of approximately 10-15 km/s from the maneuver itself, as part of the total mission Δv budget of 15-18 km/s. This burn, typically using solid rocket motors, converts the spacecraft's kinetic energy optimally, far exceeding what could be achieved at greater solar distances. Early studies identified a 2021 launch window for an 8-year transit to 'Oumuamua, but this has been superseded by later analyses favoring 2030 or 2033 opportunities due to improved trajectory modeling and launcher availability; the 2030 window involves a 22-year flight to arrival in 2052, while 2033 enables a shorter 15-year transit arriving in 2048. These timelines account for a deep space maneuver option in the 2030 case to refine the trajectory post-launch.^[13]^[27]^[28] Performance metrics for this trajectory include a characteristic energy (C3) of approximately 100 km²/s² at Earth escape, enabling spacecraft heliocentric speeds that culminate in a relative velocity of 50-60 km/s upon target encounter, such as 55.7 km/s for 'Oumuamua in baseline designs. This high relative speed necessitates flyby-only observations without deceleration, prioritizing rapid instrumentation deployment during the brief encounter window. Heat management poses a significant challenge at perihelion, where solar flux can reach levels comparable to or exceeding the Parker Solar Probe's, with peak temperatures approaching 2000 K; the design incorporates a carbon-composite heat shield inspired by Parker's, massing 12-39 kg depending on launcher class, to protect the propulsion and payload during the ~10.5-month inbound leg from Jupiter.^[13]^[28]^[4]

Jupiter Oberth Trajectory

The Jupiter Oberth trajectory represents an alternative mission architecture within Project Lyra, designed to intercept interstellar objects by leveraging a powered gravitational assist at Jupiter rather than a close solar passage. This approach begins with an Earth launch, potentially incorporating preliminary gravity assists from Venus and Earth to reach Jupiter efficiently, followed by a direct transfer to the gas giant for the key maneuver. Upon arrival at Jupiter, the spacecraft executes a powered Oberth burn at periapsis, typically at a distance of 10-20 Jupiter radii from the planet's center, where the high orbital velocity amplifies the propulsive efficiency through the Oberth effect. This burn propels the spacecraft outbound toward the target interstellar object at hyperbolic excess velocities of approximately 40-50 km/s relative to the Sun, enabling pursuit without the thermal challenges of a solar flyby.^[3] The maneuver requires a significant delta-V budget at Jupiter, estimated at 8-12 km/s, delivered primarily through solid rocket stages to achieve the necessary acceleration during the brief high-speed window at periapsis. Earlier trajectory adjustments, such as a deep-space maneuver and additional Earth gravity assist, contribute smaller delta-V increments of around 4-5 km/s using bipropellant chemical propulsion systems like monomethylhydrazine and nitrogen tetroxide (MMH/N₂O₄), which offer specific impulses of about 341 seconds. Overall mission delta-V totals approximately 15-16 km/s, distributed across launch, interplanetary corrections, and the Jupiter burn, allowing the spacecraft to attain the required outbound hyperbolic trajectory. This configuration results in relative encounter speeds with the target object of 17-18 km/s, lower than solar Oberth options, which facilitates more stable observations.^[3] For the original target 1I/'Oumuamua, the optimal launch window opens in 2028, leading to a Jupiter encounter around 2044 and arrival at the object after a 26-year transit in 2054. This timeline aligns with the object's outbound path, providing sufficient lead time for mission preparation using current launch vehicles like the Space Launch System (SLS). For objects resembling 2I/Borisov or the recently discovered 3I/ATLAS (C/2025 N1, detected July 2025), with hyperbolic orbits inclined relative to the ecliptic, viable launch opportunities span 2026 to 2033, enabling transits of 20-30 years depending on the specific ephemeris and geometry; these windows recur approximately every 12 years due to orbital resonances. Such flexibility supports rapid-response missions to future discoveries within this velocity regime.^[3]^[29] Key advantages of the Jupiter Oberth trajectory include simplified spacecraft design, as it eliminates the need for advanced thermal protection systems to withstand solar proximity temperatures exceeding 1,500 K. This reduction in complexity translates to a higher payload fraction, with estimates of 115-240 kg of scientific instruments and subsystems deliverable via SLS Block 1B or 2, compared to more constrained masses in solar-focused designs. Additionally, the approach mitigates risks associated with precise thrust vectoring near the Sun, relying instead on Jupiter's robust gravitational well for velocity amplification. A 2022 study in Acta Astronautica demonstrated the feasibility of this trajectory using existing bipropellant engines for pre-Jupiter maneuvers and off-the-shelf solid motors (e.g., STAR 48 series) for the Oberth burn, confirming compatibility with near-term chemical propulsion technologies without exotic enhancements.^[3]

Alternative Propulsion Concepts

Project Lyra has explored several alternative propulsion concepts to overcome the limitations of chemical propulsion, which typically achieves specific impulses (Isp) around 450 seconds and requires high-energy maneuvers like solar or Jupiter Oberth transfers for interstellar object intercepts. These alternatives aim to enable faster transits, higher payloads, or rendezvous capabilities for objects like 1I/'Oumuamua, often drawing from technologies with technology readiness levels (TRL) of 3-6.^[25] Solar sails represent a propellantless option leveraging photon pressure for continuous thrust, particularly through the statite configuration where the sail hovers stationary against solar gravity at a fixed heliocentric distance. For rendezvous with interstellar objects, a statite requires a sail with a high area-to-mass ratio, achievable using lightweight materials like Kapton or advanced polymers, enabling significant velocity changes by converting gravitational potential energy into kinetic energy upon activation. Transit times could range from months for inner solar system intercepts to several years for outer system objects, enabling rapid response if statites are pre-deployed in a constellation for global coverage. This approach is feasible for future detections with early warning, as statites can loiter indefinitely without fuel.^[30]^[30]^[30] Laser sails, inspired by the Breakthrough Starshot initiative, use ground- or space-based high-power lasers to beam energy onto reflective sails for accelerated departure. In Project Lyra analyses, a 3 GW laser could propel a 1 kg sailcraft to 300 km/s (0.001c), while 30 GW supports 100 kg probes, achieving intercepts with 'Oumuamua in approximately 1.2 years from a 2030 launch. These systems enable swarm missions with multiple small spacecraft, reducing risk and cost compared to single large probes, though they require massive laser infrastructure and precise beam control to avoid thermal damage. Feasibility hinges on scaling down Starshot's gram-scale designs to kilogram-class vehicles for viable instrumentation.^[31]^[31]^[31]^[25] Nuclear propulsion options, such as nuclear thermal propulsion (NTP), heat hydrogen propellant via a nuclear reactor for higher efficiency, with Isp values of 900-970 seconds—more than double that of chemical systems—allowing delta-V up to 40 km/s and payloads in the thousands of kilograms. For 'Oumuamua, NTP trajectories yield transit times of 10-15 years from Jupiter assists, compared to over 20 years for chemical baselines, using engines like the Small Nuclear Rocket Engine (SNRE) or historical NERVA derivatives at TRL 5-6. This enables true rendezvous rather than flybys, with feasibility supported by ongoing NASA demonstrations in the 2020s, though challenges include cryogenic propellant storage and regulatory hurdles for nuclear launches.^[32]^[32]^[32]^[32] Hybrid approaches incorporate the V-Infinity Leveraging Maneuver (VILM), which uses resonant Earth or Jupiter orbits to amplify departure hypervelocity before applying primary propulsion, effectively boosting injection speeds for sails or nuclear stages. In Lyra studies, VILM with chemical upper stages enables less powerful launchers like Ariane 6 to achieve 'Oumuamua trajectories in 26-28 years, and it pairs with advanced propulsion for reduced transit times. Overall feasibility for these concepts favors sails for early-detected future objects and nuclear for dedicated rendezvous, as noted in 2023 analyses emphasizing near-term scalability.^[33]^[33]^[33]

Technical Challenges

Propulsion and Delta-V Requirements

Project Lyra's propulsion strategy relies on high-thrust chemical systems to meet the demanding delta-v requirements for intercepting interstellar objects like 1I/'Oumuamua, which enters the Solar System with a hyperbolic excess velocity of 26 km/s. The Oberth effect is central to efficient energy management, enabling greater specific energy gain from propellant expenditure when burns occur at high velocities in deep gravitational potentials, such as near the Sun. The kinetic energy increase from a delta-v burn is given by

\Delta E = \frac{1}{2} m (v + \Delta v)^2 - \frac{1}{2} m v^2 \approx m v \Delta v

for v \gg \Delta v, where m is the spacecraft mass, v the velocity at burn, and \Delta v the imparted change in velocity. This approximation highlights how the effect amplifies the burn's impact, as the added energy scales linearly with the ambient speed.^[34] The overall delta-v budget for baseline Project Lyra trajectories, incorporating gravity assists and Oberth maneuvers, totals approximately 13-18 km/s, far below the 33-76 km/s needed for direct hyperbolic transfers without planetary leverage. For instance, a 2021 launch using a Jupiter flyby followed by a solar Oberth maneuver requires about 18.3 km/s total delta-v, broken down as 10 km/s for Earth escape, 4.2 km/s at Jupiter, and 4.2 km/s at perihelion. The solar Oberth adds effective leverage equivalent to roughly 15 km/s in hyperbolic excess velocity gain, transforming an incoming velocity of around 20 km/s to over 55 km/s post-burn through the gravitational well's amplification. An alternative 2020 trajectory with Jupiter, Oberth, and Saturn flybys reduces this to 13.6 km/s total.^[34]^[35] High-thrust burns are executed using chemical propulsion, primarily solid rocket boosters with a specific impulse of 292 s, suitable for the impulsive delta-v needs at key maneuvers. For spacecraft masses of 100-500 kg, such systems achieve propellant mass fractions of 0.7-0.8, enabling the required performance while maintaining structural integrity; bipropellant options like N2O4/MMH could supplement for finer attitude control or mid-course corrections, though studies emphasize solids for the primary Oberth boost. Electric propulsion, such as ion engines using xenon, is considered for lower-thrust phases but not the core high-energy maneuvers.^[34]^[35] Gravity assists from planets like Jupiter provide propellantless delta-v by altering the spacecraft's heliocentric trajectory. In Project Lyra, a Jupiter encounter can yield 1-4 km/s effective delta-v, depending on geometry, significantly offsetting propulsion demands.^[34] Launch challenges center on achieving the necessary hyperbolic excess velocity, quantified by the characteristic energy C_3 = v_\infty^2, which measures escape performance from Earth's sphere of influence. Project Lyra requires C_3 values up to 1400 km²/s² (37 km/s v_\infty) for unassisted paths, but optimized trajectories with assists reduce this to around 100 km²/s², compatible with heavy-lift vehicles like Falcon Heavy delivering 400-750 kg payloads. Precise C_3 optimization ensures feasible injection while minimizing initial delta-v.^[34] Recent studies as of 2025 explore the use of emerging heavy-lift vehicles like SpaceX's Starship, which could deliver payloads of several tons to C3 values exceeding 100 km²/s², significantly alleviating mass and performance constraints for Project Lyra trajectories.^[21]

Encounter Dynamics and Deceleration

During encounters with interstellar objects in Project Lyra mission concepts, spacecraft experience hyper-velocity relative speeds typically ranging from 30 to 60 km/s, depending on launch timing and trajectory design. These speeds, derived from the object's hyperbolic excess velocity and the spacecraft's outbound path, constrain the viable observation window to minutes or hours, as the brief close approach—ideally under 10 km for high-resolution imaging—passes rapidly. For instance, early trajectory analyses for 'Oumuamua show flyby velocities of 33–76 km/s for launches in 2023–2027, emphasizing the challenge of capturing detailed spectral or imaging data before the object recedes.^[34] Deceleration strategies are essential to enhance science return but face significant hurdles. Retro-propulsion via chemical rockets is impractical, requiring roughly 50% of the spacecraft mass as propellant to achieve meaningful velocity reduction at these scales, which compromises payload and feasibility for flyby architectures. Alternative approaches include low-thrust electric propulsion or sail-based systems (e.g., magnetic or electric sails) to gradually slow the spacecraft, though power limitations from radioisotope thermoelectric generators at distances beyond 100 AU render them marginal for timely deceleration. Aerobraking in the target's tenuous atmosphere offers another option for comet-like objects, potentially dissipating kinetic energy without expending propellant, but this is unsuitable for dry, asteroid-like bodies such as 'Oumuamua.^[34] Close-approach dynamics introduce operational risks, including high-impact threats from ambient dust particles, which at 30–60 km/s could cause catastrophic structural damage during periapsis passes below 10 km. Thermal management is also critical, as frictional heating from potential aerobraking or dust interactions could exceed component tolerances, while cosmic radiation exposure accumulates over the long outbound leg. Rendezvous maneuvers, aiming to match the object's velocity for extended study spanning days to weeks, demand an additional 10–20 km/s Δv beyond flyby requirements—feasible in optimized cases with relative speeds as low as 600 m/s but deemed marginal due to propulsion constraints and extended mission timelines exceeding 25 years. The baseline thus remains a high-speed flyby, precluding sample return without advanced nuclear propulsion.^[34]

Launch Opportunities

Required Performance Metrics

Project Lyra missions require characteristic energies (C3) ranging from approximately 100 to 150 km²/s² to enable heliocentric hyperbolic trajectories toward interstellar objects like 1I/'Oumuamua, primarily using Jupiter-assisted paths. For Jupiter Oberth maneuvers (JOM), a C3 of around 100 km²/s² suffices for flyby missions, while values up to 150 km²/s² support faster trajectories or additional gravity assists to reduce flight times. These energy levels ensure the spacecraft achieves sufficient hyperbolic excess velocity post-launch to escape Earth's gravity and align with the target's outbound trajectory.^[33] The injection orbit for Project Lyra is a heliocentric hyperbolic trajectory with a post-launch v_∞ of roughly 10-12 km/s, corresponding directly to the C3 via the relation C3 = v_∞². This places the spacecraft on an initial path that can be refined through planetary encounters, such as a Jupiter flyby, to boost speed toward the ~26 km/s relative velocity required for intercepting 'Oumuamua. Payload requirements to Earth escape typically range from 100 to 860 kg, encompassing the probe, scientific instruments, and any propulsion stages for mid-course corrections or deceleration, with lower masses suiting minimalist flyby designs and higher ones enabling more capable rendezvous or swarm missions.^[33]^[36] Mission scalability ties payload capacity to launch windows, with payloads around 100-750 kg feasible for opportunities in the late 2020s to 2030s, such as 2029 or 2031 alignments, where C3 demands of 100-150 km²/s² support masses up to 860 kg but yield durations of 20-28 years. Larger payloads become viable for optimized trajectories allowing rendezvous, providing enhanced observational capabilities like imaging or sample collection precursors. Launch opportunities recur every 2-5 years, influenced by the relative positions of Earth, Jupiter, and the target object; for instance, a 2028 window offers an optimal geometry for 'Oumuamua pursuit using a Jupiter Oberth maneuver, with a 26-year flight duration. According to a 2023 analysis, achieving C3=150 km²/s² with over 100 kg payload is possible with advanced heavy-lift systems, while C3=100 km²/s² supports 100-750 kg depending on configuration, underscoring the need for robust escape performance. A 2024 update identifies 2032 as an optimal launch year using Starship for a passive Jupiter gravity assist, enabling up to 860 kg payloads.^[33]^[37]^[36]

Viable Launch Vehicles

The SpaceX Falcon Heavy, in expendable mode, serves as a baseline launch option for Project Lyra missions requiring a characteristic energy (C3) of approximately 100 km²/s², delivering payloads up to 750 kg to enable flyby trajectories toward interstellar objects like 1I/'Oumuamua using Jupiter assists. This capability underpins mission concepts with compact probes and solid rocket stages for Oberth maneuvers, though it limits advanced deceleration without additional propulsion.^[37] The Ariane 6 is considered insufficient for high-C3 escapes to Jupiter (C3 ≈ 84 km²/s²) without advanced propulsion, as it delivers no useful payload in such configurations; alternatives like United Launch Alliance's Vulcan Centaur may offer comparable performance but require further analysis for Project Lyra suitability. These vehicles could facilitate international collaborations, but their upper stages constrain trajectory flexibility.^[38] SpaceX's Starship represents a transformative advancement, analyzed in 2023 and 2024 studies as capable of delivering 860 kg to C3 values exceeding 100 km²/s² through low Earth orbit (LEO) refueling with 8-10 tanker flights, enabling larger probes or additional fuel for deceleration maneuvers. A November 2025 assessment by the Initiative for Interstellar Studies reaffirms Starship's potential, noting the need for LEO refueling and 2-3 additional rocket stages due to methalox propellant inefficiencies for deep-space, with hybrid upper stages like CASTOR or STAR motors at Jupiter perijove; optimal launches target 2032 for passive Jupiter assists.^[39]^[36]^[21] NASA's SLS Block 1B can achieve approximately 115 kg to relevant C3 profiles for JOM trajectories, supporting New Horizons-class probes, as analyzed in 2022. China's Long March 9, in development with first launches expected in the 2030s, promises similar heavy-lift potential (estimated 100 kg payloads) but lacks firm commitments as of November 2025. Overall, Starship emerges as a game-changer, substantially increasing mission feasibility by accommodating deceleration fuel or expanded scientific instruments that smaller launchers cannot support. Recent developments as of 2024 include nuclear thermal propulsion (NTP) options for direct flights, launching 2031-2040 with 100 kg payloads, and probe swarms (e.g., 200 x 0.5 kg units) for covering positional uncertainties.^[19]^[36]

References

[1]
Project Lyra – Exploring Interstellar Objects
Project Lyra develops concepts for reaching interstellar objects such as 1I / 'Oumuamua and 2I / Borisov with a spacecraft, based on near-term technologies.
[2]
Project Lyra: There is Another Way - Initiative for Interstellar Studies
Adam Hibberd 2025 PN7, the widely touted newly discovered quasi-satellite of the Earth, has stirred-up in me a renewed fascination for identifying apparently ...
[3]
Project Lyra: A Mission to 1I/'Oumuamua without Solar Oberth Manoeuvre
### Summary of https://arxiv.org/abs/2201.04240
[4]
Project Lyra: Sending a spacecraft to 1I/'Oumuamua (former A/2017 ...
Aug 30, 2019 · Hein et al. (2019) and Hibberd et al. (2019) have proposed a multi-year chase to flyby the ISO 1I/'Oumuamua, provided that the ...
[5]
Catching 1I/'Oumuamua – Mission opportunities after 2024
In this paper we demonstrate that a mission to 1I/'Oumuamua is feasible at later points in time, providing sufficient time for developing a spacecraft.
[6]
'Oumuamua - NASA Science
Dec 5, 2024 · The first known interstellar object to visit our solar system, 1I/2017 U1 'Oumuamua, was discovered Oct. 19, 2017 by the University of Hawaii's Pan-STARRS1 ...Missing: anomalous acceleration gravitational
[7]
[PDF] Non-Gravitational Acceleration in the Trajectory of 1I/2017 U1 ... - ESO
Non-gravitational acceleration, weaker than gravity, was detected in ʻOumuamua's motion. Its trajectory cannot be explained by gravity alone.<|separator|>
[8]
Comet 2I/Borisov - NASA Science
or about the length of nine football fields. It's rapidly moving ...
[9]
2I/Borisov: A C 2 -depleted interstellar comet
We conclude that 2I is highly depleted in C 2 , and may have a composition similar to Solar System carbon-chain depleted comets.
[10]
Project Lyra: Sending a Spacecraft to 1I/'Oumuamua (former ... - arXiv
Nov 8, 2017 · This paper presents a high-level analysis of potential near-term options for a mission to 1I/'Oumuamua and potential similar objects.
[11]
Catching 1I/'Oumuamua - Mission Opportunities After 2024 - arXiv
Feb 13, 2019 · Project Lyra: Catching 1I/'Oumuamua - Mission Opportunities After 2024. Authors:Adam Hibberd, Andreas M. Hein, T. Marshall Eubanks.Missing: post- | Show results with:post-
[12]
A Spacecraft Could Catch Up With Interstellar Object 'Oumuamua in ...
Jan 30, 2022 · On October 30th, 2017, less than two weeks after 'Oumuamua was detected, the Initiative for Interstellar Studies (i4is) inaugurated Project Lyra ...
[13]
Project Lyra: Catching 1I/'Oumuamua Using Nuclear Thermal Rockets
Aug 12, 2020 · Title:Project Lyra: Catching 1I/'Oumuamua Using Nuclear Thermal Rockets. Authors:Adam Hibberd, Andreas M. Hein · Download PDF. Abstract: The ...Missing: lead | Show results with:lead
[14]
Project Lyra: The Mission to Resolve a Mystery
Jul 4, 2023 · Project Lyra is the study of the feasibility of a spacecraft mission to the first interstellar object to be discovered passing through our Solar System.
[15]
Project Lyra: Sending a Spacecraft to 1I/'Oumuamua (formerly A ...
Nov 10, 2017 · The discovery of the first interstellar object entering our solar system is an exciting event and could be the chance of a lifetime or several ...
[16]
Initiative for Interstellar Studies - Wikipedia
Project Lyra: In November 2017, i4is launched Project Lyra and proposed a set of mission concepts for reaching the interstellar objects 1I/ʻOumuamua, 2I/ ...
[17]
A mission to 1I/'Oumuamua without Solar Oberth Manoeuvre
In this paper, we identify an alternative route to the interstellar object 1I/'Oumuamua, based on a launch in 2028, which does not require a SOM but has a ...
[18]
Project Lyra: The Way to Go and the Launcher to Get There - arXiv
May 4, 2023 · In this paper the various launch options available to Project Lyra are addressed to allow a general overview of their capabilities.Missing: i4is workshops
[19]
None
Nothing is retrieved...<|control11|><|separator|>
[20]
On a Second Moon and the Zond 1 Probe.
Oct 28, 2025 · Furthermore there is evidence that over the course of Zond 1's trajectory, it's distance w.r.t. 2025 PN7 was noticeably small compared to other ...
[21]
https://i4is.org/elons-starship-to-launch-project-lyra/
[22]
[PDF] BRIDGE TO THE STARS - Universities Space Research Association
BRIDGE TO THE STARS: A MISSION CONCEPT TO AN INTERSTELLAR OBJECT S. W. Courville1, ... Science goals & objectives: Bridge has two sci- ence goals: (1) ...
[23]
None
### Project Lyra Summary
[24]
[PDF] arXiv:2201.04240v1 [astro-ph.EP] 11 Jan 2022
Jan 11, 2022 · Project Lyra: A Mission to 1I/'Oumuamua without Solar Oberth Manoeuvre ... ject 2I/Borisov in 2019 (Jewitt & Luu 2019) confirmed that there is ...
[25]
Catching 1I/'Oumuamua – Mission Opportunities After 2024
Sep 26, 2019 · Project Lyra: Catching 1I/'Oumuamua – Mission Opportunities After 2024 ... Solar Oberth. The results show that a Solar Oberth at 6 Solar ...Missing: timeline | Show results with:timeline
[26]
(PDF) Project Lyra: Sending a spacecraft to 1I/'Oumuamua (former A ...
Project Lyra: Catching 1I/'Oumuamua - Mission Opportunities After 2024. February 2019. Adam Hibberd · Andreas M. Hein · Marshall Eubanks.
[27]
Project Lyra: Another Possible Trajectory to 1I/'Oumuamua - arXiv
May 10, 2022 · This paper elaborates an alternative mission to 1I/'Oumuamua, this time also requiring a Jupiter Oberth Manoeuvre (JOM) to accelerate the spacecraft towards ...Missing: post- 2024<|control11|><|separator|>
[28]
[PDF] arXiv:2012.12935v1 [astro-ph.IM] 23 Dec 2020
Dec 23, 2020 · This work proposes the use of a statite,3 an artificial satellite that employs a solar sail to continuously hover in place without entering into ...
[29]
[PDF] Catching 1I/'Oumuamua – Using Laser Sailcraft in 2030 - arXiv
In 2018, a second interstellar object,. 2I/Borisov was discovered [11,31,32]. ... Osborne, Project Lyra: Sending a spacecraft to 1I/'Oumuamua (former A/2017 ...
[30]
None
### Summary of Nuclear Thermal Propulsion for Project Lyra (1I/’Oumuamua)
[31]
[PDF] Project Lyra: The Way to Go and the Launcher to Get There - arXiv
May 4, 2023 · Project Lyra is the feasibility study of missions to the first interstellar object to be discovered, 1I/'Oumuamua (Flekkøy et al.,. 2019). The ...Missing: workshops preprints
[32]
https://arxiv.org/pdf/2008.05435
[33]
Project Lyra: Sending a Spacecraft to 1I/'Oumuamua (former A/2017 ...
Oct 17, 2018 · Further technology options are outlined, ranging from electric propulsion, and more advanced options such as laser electric propulsion, and ...
[34]
[PDF] Project Lyra: What SpaceX could do - Initiative for Interstellar Studies
[2] Project Lyra: The Way to Go and the Launcher to Get There, Hibberd, 4 May 2023 arxiv.org/abs/2305.03065. Adam Hibberd. Page 2. Principium | Issue 41 | ...
[35]
Project Lyra: Falcon Heavy Expendable
Mar 27, 2023 · Let us instead settle on a V-infinity Leveraging Manoeuvre, VILM, as we did with Ariane 6 4 (refer my previous blog) but, with a far more ...Missing: Maneuver | Show results with:Maneuver
[36]
Project Lyra: Using an Ariane 6 - Initiative for Interstellar Studies
Mar 16, 2023 · The answer is no for one very clear reason: the V-infinity Leveraging Manoeuvre (VILM). A VILM is a useful mechanism by which the speed of ...Missing: Maneuver | Show results with:Maneuver