Fact-checked by Grok 2 weeks ago

STS-83

STS-83 was a mission that launched aboard the orbiter on April 4, 1997, to conduct the first flight of the Microgravity Science Laboratory-1 (MSL-1), a module dedicated to advancing , , combustion science, and fluid physics research in microgravity. The mission, originally planned for 16 days, was abruptly shortened to just under four days due to a malfunction in one of the shuttle's fuel cells, marking only the third time in program history that a mission was cut short for technical reasons. Despite the early termination, the crew successfully activated and operated several key experiments during the brief orbital phase, providing valuable data that informed the subsequent reflight of the MSL-1 payload on STS-94 in July 1997. The seven-member crew, commanded by James D. Halsell Jr., included Pilot Susan L. Still, Payload Commander , Mission Specialists and Michael L. Gernhardt, and Payload Specialists Roger K. Crouch and Gregory J. Linteris, all of whom demonstrated exceptional adaptability in managing the mission's compressed timeline. Columbia lifted off from Kennedy Space Center's Launch Complex 39A at 2:20 p.m. EST, achieving a inclination of 28.45 degrees and activating the MSL-1 module within hours of launch. Among the notable experiments were the Thermophysical Properties of Undercooled Metallic Melts (TEMPUS), which studied molten metal behavior for improved alloy development; Liquid-Phase II, investigating material processing; and combustion studies like Laminar Processes and Structure of Flame Balls at Low Lewis-number, aimed at enhancing and technologies. On April 7, mission control detected excessive voltage degradation in Fuel Cell 2, prompting NASA to prioritize a safe return over continuing operations, with Columbia touching down at Kennedy Space Center on April 8 at 2:33 p.m. EDT after 3 days, 23 hours, 13 minutes, and 38 seconds in space. This incident highlighted the reliability challenges of shuttle fuel cell systems but also underscored the program's robustness, as the same crew and payload were rapidly reflown on STS-94 aboard Columbia launched on July 1, 1997, successfully completing the full 16-day MSL-1 objectives. Overall, STS-83 contributed foundational microgravity research that supported broader NASA goals in materials innovation and space-based manufacturing, despite its curtailed duration.

Mission Background

Objectives

The primary objective of the STS-83 mission was to conduct a comprehensive set of microgravity experiments using the Microgravity Science Laboratory (MSL-1) facility aboard the Space Shuttle Columbia, marking the first dedicated U.S. microgravity laboratory flight in Spacelab. This initiative aimed to leverage the near-weightless environment of low Earth orbit to investigate fundamental physical phenomena that are distorted by gravity on Earth, thereby advancing scientific understanding in key disciplines. The MSL-1 integrated 29 individual experiments contributed by researchers from NASA, international partners including the German Space Agency (DLR), the European Space Agency (ESA), the Japanese National Space Development Agency (NASDA), and various universities across the United States, Germany, Japan, and other nations. These experiments were housed within specialized facilities such as the Combustion Module-1, the Large Isothermal Furnace (LIF), the TEMPUS electromagnetic levitation furnace, and the Protein Crystal Growth (PCG) hardware, enabling precise control and observation under microgravity conditions. The experiments focused on three core scientific areas: , science, and fluid physics. In , investigations targeted solidification processes, including dendrite growth in alloys like nickel-carbon and thermophysical property measurements (e.g., specific , , and ) of multi-component alloys such as Ti-Zr-Cu-Ni and Zr-Ni-Cu-Al-Nb, to improve modeling of material processing for advanced manufacturing. science experiments examined behavior in low , such as the formation and stability of spherical flame balls in lean hydrogen-oxygen mixtures (via the SOFBALL investigation), droplet burning mechanisms (Droplet Combustion Experiment, DCE), and soot production in fiber-supported droplets (Fiber Supported Droplet Combustion-2, FSDC-2), with goals to enhance protocols and efficiency in propulsion systems. Fluid physics studies addressed dynamics without sedimentation, including nonlinear oscillations of bubbles and drops (Bubble and Drop Nonlinear Dynamics, BDND), internal flows within levitated drops (Internal Flows in Free Drops, IFFD), capillary-driven (Capillary-driven Heat Transfer, CHT), and coefficients in liquid metals like tin and lead-tin-tellurium alloys, providing insights into behaviors relevant to engineering applications. The was planned for a 16-day to facilitate extended experiment runs, allowing sufficient time for , real-time monitoring, and to achieve statistically robust results in the microgravity environment. Crew members, including mission specialists with scientific backgrounds, were responsible for operating the MSL-1 facilities, performing hands-on procedures, and troubleshooting to ensure the experiments met their scientific aims.

Payload

The Microgravity Laboratory-1 (MSL-1) was housed within a European-built Long Module, a reusable pressurized laboratory adapted specifically for microgravity research in , fluid physics, , and combustion . This facility provided a shirt-sleeve environment in the Columbia's bay, equipped with experiment racks, thermal control systems, and environmental subsystems to enable safe and efficient operations. Key components included a middeck for secure sample manipulation, multiple furnaces for controlled heating and processing, and advanced optical diagnostics systems for real-time imaging and analysis of experiments. Among the core facilities were the Combustion Module-1 (CM-1), a specialized apparatus from designed to investigate behaviors through contained flame experiments, the Materials Science Laboratory (MSL) for levitation and processing of metallic alloys under reduced gravity, and the Space Acceleration Measurement System (SAMS) for precise measurement of onboard accelerations to characterize the microgravity environment. These elements were integrated into dedicated racks within the module, allowing for modular setup and operation. The payload supported a total of 29 experiments through robust supporting systems, including the Electrical Power Distribution Subsystem (EPDS) for distributing and derived from the Orbiter's fuel cells via the Power Control Box, and the Command and Data Management Subsystem (CDMS) featuring computers, mass memory units, and high-rate recorders for data acquisition, processing, and downlink. International collaboration was evident in contributions such as Japan's Large Isothermal (LIF), a high-precision for materials processing experiments. Integration of the MSL-1 payload into Columbia's payload bay occurred at the Kennedy Space Center's , where the module was mated to the Orbiter via the Spacelab Transfer Tunnel for access, ensuring compatibility with the vehicle's structural, power, and thermal interfaces while occupying the forward section of the 15-foot-diameter bay.

Crew

Manifest

The of STS-83 consisted of seven members: five NASA career astronauts and two payload specialists selected for their expertise in microgravity experiments aboard the Microgravity Science Laboratory-1 (MSL-1). Crew Composition:
RoleNameFlight ExperienceKey Biographical Highlights
CommanderJames D. Halsell Jr.3rd spaceflightU.S. Air Force Colonel selected as an astronaut in 1990; held a Bachelor of Science in Engineering from the U.S. Air Force Academy, a Master of Science in Management from Troy State University, and a Master of Science in Space Operations from the Air Force Institute of Technology; prior flights included STS-65 (pilot) and STS-74 (commander); logged over 549 hours in space prior to STS-83.
PilotSusan L. Still (later Kilrain)1st spaceflightU.S. Navy Lieutenant Commander selected in 1994; held a Bachelor of Science in Aeronautical Engineering from Embry-Riddle Aeronautical University and a Master of Science in Aerospace Engineering from the Georgia Institute of Technology; test pilot with over 3,000 flight hours in more than 30 aircraft types prior to selection.
Payload CommanderJanice E. Voss3rd spaceflightCivilian engineer selected in 1990; held a Bachelor of Science in Engineering Science from Purdue University, a Master of Science in Electrical Engineering from the Massachusetts Institute of Technology, and a Doctorate in Aeronautics and Astronautics from the Massachusetts Institute of Technology; prior flights included STS-57 and STS-63; expertise in payload operations and space science.
Mission Specialist 1Donald A. Thomas3rd spaceflightCivilian materials scientist selected in 1990; held a Bachelor of Science in Physics from Case Western Reserve University, a Master of Science in Materials Science from Cornell University, and a Doctor of Philosophy in Materials Science from Cornell University; prior flights included STS-65 and STS-70; specialized in crystal growth and materials processing in microgravity.
Mission Specialist 2Michael L. Gernhardt1st spaceflightCivilian aquanaut and engineer selected in 1992; held a Bachelor of Science in Physics from Vanderbilt University, a Master of Science in Bioengineering from the University of Pennsylvania, and a Doctor of Philosophy in Bioengineering from the University of Pennsylvania; commercial diver with extensive experience in undersea habitats; focused on human spaceflight physiology and extravehicular activity systems.
Payload Specialist 1Roger K. Crouch1st spaceflightPhysicist from the National Institute of Standards and Technology (NIST); held a Bachelor of Science in Physics from Tennessee Polytechnic Institute, a Master of Science in Physics from Virginia Polytechnic Institute, and a Doctor of Philosophy in Physics from Virginia Polytechnic Institute; expertise in solid-state physics, crystal growth, and low-gravity materials science; served as backup payload specialist for prior missions including STS-42 and STS-64.
Payload Specialist 2Gregory T. Linteris1st spaceflightCombustion scientist from NIST; held a Bachelor of Science in Chemical Engineering from Princeton University, a Master of Science in Mechanical Engineering from Stanford University, and a Doctor of Philosophy in Mechanical and Aerospace Engineering from Princeton University; specialized in microgravity combustion, fire suppressants, and chemical kinetics; principal investigator for NASA-funded experiments on droplet combustion.
The commander, pilot, payload commander, and mission specialists were drawn from NASA's astronaut corps, selected through the agency's competitive process emphasizing military or experience for flight roles and advanced scientific or engineering backgrounds for specialist positions. In contrast, the payload specialists were non-career astronauts chosen specifically for their domain expertise in MSL-1 experiments, with Crouch and Linteris nominated by NIST in with to support fluid physics and combustion research modules. STS-83 marked the first U.S. mission to include two payload specialists dedicated exclusively to civilian-oriented microgravity , highlighting 's emphasis on partnering with national laboratories like NIST for targeted scientific payloads rather than or commercial collaborators.

Roles

served as commander of STS-83, responsible for overall mission command, including oversight of ascent and descent piloting, crew coordination, and the execution of scientific objectives in the Microgravity Science Laboratory-1 (MSL-1) despite the mission's early termination. Susan L. Still acted as pilot, handling primary piloting duties for launch and landing, as well as supporting spacecraft operations and any potential rendezvous activities, though none were scheduled for this mission. Janice E. Voss functioned as payload commander, leading the coordination of MSL-1 experiments focused on materials and combustion science, serving as the primary interface for science operations between the crew and ground control. Donald A. Thomas, as a , provided support for integration and MSL-1 operations, assisting in the setup and monitoring of microgravity experiments. Michael L. Gernhardt, another and EVA specialist, handled fluid physics experiments within MSL-1, contributing to safety protocols and experiment execution related to microgravity fluid behavior. Roger K. Crouch, serving as a , led experiments in MSL-1, with primary responsibility for operations that facilitated hands-on manipulation of samples under microgravity conditions. Gregory T. Linteris, the other , specialized in the combustion module for MSL-1, implementing protocols and conducting controlled ignition experiments to study fire behavior . Crew seat assignments were configured to optimize : Halsell in the /orbiter seat 1 (left front ), Still in pilot/orbiter seat 2 (right front ), Voss in seat 3 (aft of ), Gernhardt in seat 4 (aft of pilot), Thomas in seat 5 (middeck), Crouch in seat 6 (middeck), and Linteris in seat 7 (middeck); this arrangement positioned the science-oriented crew members closer to the middeck access for the module in the payload bay.

Launch

Preparation

Following the completion of STS-80 on December 2, 1996, (OV-102) underwent refurbishment in the (OPF) at NASA's (KSC), beginning with its tow into the facility on December 7, 1996. During this phase, technicians performed routine maintenance, including tile inspections, systems checkouts, and integration of the primary , the Microgravity Laboratory-1 (MSL-1), into the in December 1996 to prepare for the and experiments. was then rolled over to the (VAB) on March 5, 1997, where it was mated to the external tank and solid rocket boosters. The STS-83 crew, consisting of five astronauts and two payload specialists, completed an approximately 18-month training regimen at 's (JSC) in , , starting in late 1995. This program encompassed simulations of MSL-1 experiment operations and troubleshooting, laboratory sessions to practice procedures, and emergency drills for contingencies such as abort scenarios and payload malfunctions. Training emphasized the pressurized module's 24-hour operations, with crew members divided into red and blue teams for . Ground support activities at KSC ramped up in early 1997, with the external tank (ET-84) mated to the solid rocket boosters in the on January 30, 1997, followed by the full stack assembly upon Columbia's arrival. The integrated launch vehicle was rolled out to Launch Pad 39A on March 11, 1997, where final closeouts, including payload hazard tests and interface verifications, were conducted to ensure compatibility between the orbiter, MSL-1, and . The Flight Readiness Review on March 28, 1997, confirmed overall vehicle readiness, though the launch was postponed 24 hours from April 3 to due to the need for additional on a payload bay water coolant line. On , further delays of 20 minutes and 32 seconds addressed an orbiter access hatch seal replacement, with weather forecasts indicating only a 10 percent chance of violations to launch commit criteria, such as exceeding 5/8 coverage or anvil clouds within 10 nautical miles. These go/no-go polls across centers and cleared the mission for the 2:20 p.m. EDT window on .

Liftoff

The for STS-83 proceeded from Launch Complex 39A at NASA's , culminating in liftoff on April 4, 1997, at 2:20:32 p.m. . A planned 24-hour delay from April 3 had been implemented earlier due to payload bay coolant line insulation issues, but the final on launch day included a hold at T-9 minutes for hatch seal replacement and leak checks, which was resolved without further issues. Key pre-ignition steps, such as arming the sound suppression water system at T-1 minute, occurred nominally, leading to (SRB) ignition at T-0. During ascent, the three space shuttle main engines (SSMEs) ignited 6.6 seconds prior to SRB liftoff thrust, propelling upward from Pad 39A. SRB separation occurred at approximately T+2:07, about 43 miles east of the , after which the SSMEs continued to burn. The ascent profile followed a standard 28.45° inclination trajectory, with external tank separation and main engine cutoff () at approximately T+8 minutes 30 seconds, at a of about 17,300 mph and an altitude of approximately 78 statute miles. Subsequent (OMS) burns circularized the orbit at 184 miles altitude and full orbital of 17,500 mph, with the first orbit confirmed around T+45 minutes. Post-insertion initial systems checks verified nominal performance of the orbiter's subsystems, including the payload bay environment, with the Microgravity Science Laboratory (MSL-1) Spacelab module confirmed ready for deployment following transatlantic payload staging. Commander Jr. and Pilot Susan L. Still monitored the ascent closely from the flight deck.

Mission Operations

In-Flight Activities

The Microgravity Science Laboratory-1 (MSL-1) was activated shortly after orbit insertion on Flight Day 1, with the crew configuring the module and setting up the Middeck facility to isolate experiments from the cabin environment. This setup enabled initial runs of and investigations, including ignition of droplet tests using hot-wire igniters within the and electromagnetic processing in the TEMPUS facility for undercooling studies. Crew members operated in 12-hour alternating shifts as red and blue teams to provide 24/7 monitoring of the MSL-1 payload inside the pressurized module, ensuring continuous oversight of experiment parameters such as , , and ignition sequences. Real-time video, , and environmental data were downlinked to the Payload Operations Control Center (POCC) at NASA's (MSFC) for immediate analysis by ground teams, facilitating adjustments like fuel flow rates in tests. Due to the mission's unexpected abbreviation to four days, the crew prioritized high-value experiments, such as the Combustion Module-1 (CM-1) burns for the Structure of Flame Balls at Low Lewis-number (SOFBALL) investigation, which completed two successful runs to study flame stability in lean mixtures using electric spark ignition up to 700 mJ. Overall, several of the 29 planned MSL-1 experiments received partial execution, yielding initial data on phenomena like formation in laminar flames and protein crystal growth, though many required the subsequent STS-94 reflight for full completion. Spacecraft maintenance tasks focused on maintaining orbital through periodic firings to align with experiment requirements, minimizing g-jitter disturbances measured by onboard accelerometers like SAMS and OARE. Thermal management in the microgravity environment involved monitoring the Environmental Control Subsystem to regulate cabin temperatures and humidity, ensuring stable conditions for sensitive facilities such as the Large Isothermal Furnace used in liquid-phase tests.

Timeline

The STS-83 mission began with the launch of from Kennedy Space Center's Launch Pad 39A on April 4, 1997, at 2:20:32 p.m. EDT, marking the start of Flight Day 1, which spanned April 4-5. Following orbital insertion, the crew activated the Microgravity Science Laboratory-1 (MSL-1) module in the payload bay and initiated the first runs of several experiments focused on microgravity research, including initial and fluid physics investigations. These early activations allowed for the setup and commencement of automated and crew-tended operations within the laboratory environment. On Flight Day 2, covering 5-6, the crew conducted combustion tests using the MSL-1 Combustion Module, examining flame behavior and soot production in microgravity, alongside materials processing experiments involving and alloy solidification. To support continuous 24-hour operations for the time-sensitive experiments, the crew adjusted their sleep shifts, dividing into two teams for overlapping monitoring and maintenance activities. Flight Day 3, from -7, saw the continuation of MSL-1 experiments, with additional runs in the areas of and research, while ground controllers continued to monitor the No. 2 anomaly—initially detected shortly after launch—with rising differential voltage trends. On , around 10 a.m., the Mission Management Team decided to terminate the early due to the persistent issue after failed purge attempts, and the was shut down later that afternoon. The crew proceeded with nominal science operations amid the assessments. During Flight Day 4, spanning April 7-8, following the termination decision, the crew prepared for deorbit while completing limited additional experiment data collection. landed successfully at Kennedy Space Center's Runway 33 on April 8, 1997, at 2:33:11 p.m. EDT, after completing 63 orbits and traveling approximately 1.5 million statute miles.

Anomalies

Fuel Cell Failure

The Space Shuttle Orbiter's electrical power subsystem for STS-83 relied on three , each utilizing and to electrochemically generate electricity and potable water as a byproduct for the crew and systems. These units, rated at 12 kilowatts continuous output each with a peak of 16 kilowatts, were essential for all operations, with requiring all three to remain operational for extended flights per protocols. Although 2 had shown elevated performance readings pre-launch exceeding limits, a was granted to proceed with the . On Flight Day 3, approximately 48 hours into the mission, No. 2 began exhibiting intermittent performance degradation, specifically a steady in substack 3 (corresponding to cell performance monitoring channel 3), trending toward the critical limit that would compromise safe power generation. The symptoms included erratic voltage differentials between the substack's banks, reducing overall output below acceptable thresholds despite initial stability post-activation. The anomaly was first detected by ground controllers at through real-time telemetry monitoring of parameters, prompting immediate notification to the crew. The flight crew then performed , including manual verification of voltage readings and execution of procedures to expel potential contaminants or excess from the reactant streams. 1 and 3 continued to operate nominally throughout, providing sufficient backup power but insufficient for the planned 16-day mission duration under flight rules. Post-flight analysis determined no actual degradation or crossover occurred; the anomaly was due to a misreading in the Cell Performance Monitor (). This fuel cell malfunction represented the third instance of early mission termination in the Space Shuttle program, following STS-2 in 1981 (due to thermal tile concerns) and STS-44 in 1991 (due to a payload gyroscope failure), but marked the first such event directly attributable to the power subsystem.

Termination Decision

The Mission Management Team (MMT) initiated a real-time assessment of the fuel cell anomaly using telemetry data from Columbia, focusing on the increasing differential voltage in substack 3 of Fuel Cell 2, trending upward toward a critical differential of up to 300 millivolts and approaching 250 millivolts by April 5. This review, convened around 2:00 GMT on April 6, 1997, involved consultations with engineering experts to evaluate recovery options, such as reactant purges, against escalating safety risks. Although one remaining fuel cell could support basic operations, the team determined that the degradation posed unacceptable hazards, including potential hydrogen-oxygen crossover, localized heating, or fire, outweighing any prospects for on-orbit recovery. Key considerations in the evaluation included the risk of total power loss during critical phases and the direct impact on re-entry systems, as flight rules mandated all three fuel cells operational to ensure sufficient redundancy for safe return. The MMT weighed inputs from ground engineers and the , prioritizing conservative contingency planning that avoided the need for an (EVA) to address the issue. Pre-defined abort criteria in the flight rules guided , emphasizing crew safety over extended mission objectives while allowing preservation of partial Microgravity Laboratory-1 (MSL-1) experiment data, such as results from the TEMPUS furnace and Liquid-Phase Sintering II investigations. On April 6, 1997, at approximately 10:00 a.m. EDT (14:00 GMT), the MMT formally declared a minimum duration flight (MDF) abort, curtailing the planned 16-day mission to roughly 4 days and directing an early landing on April 8. This decision shifted operations to a contingency profile, shutting down the affected later that afternoon and reallocating resources for a full reflight as STS-94, ensuring no loss of core scientific objectives.

Landing

Re-entry

The deorbit preparation for STS-83 commenced on Flight Day 4, approximately four hours prior to the burn, with the crew configuring the Orbiter for descent and verifying systems including the (OMS) engines and (RCS) jets. On April 8, 1997, the OMS engines fired retrogradely for about three minutes, imparting a delta-V of approximately 298 feet per second to lower the perigee from the nominal 184-mile (296 km) circular orbit and initiate atmospheric interface. This maneuver targeted a crossrange of 21 nautical miles and an entry range of 4,349 nautical miles, aligning the trajectory for a (KSC) landing. Atmospheric entry began at the interface altitude of 400,000 feet (122 km), with Columbia traveling at approximately 25,700 feet per second ( 25), generating intense as the vehicle compressed and ionized the air. Peak heating occurred roughly 10-15 minutes after interface, with external temperatures reaching up to 1,477°C (2,691°F) managed through the vehicle's 40-degree angle-of-attack orientation and the Protection System () tiles and reinforced carbon-carbon panels, which were designed to withstand surface temperatures below 1,650°C. G-forces peaked at around 1.5-2 g's during the hypersonic phase, gradually decreasing as speed dropped below , while onboard Primary Avionics Software System (PASS) computers provided autonomous guidance through roll reversals and bank angle adjustments to control heating rates and trajectory. The plasma sheath formed around the Orbiter further contributed to the thermal environment but dissipated as altitude increased during the subsonic transition. Weather conditions at KSC were favorable during the re-entry window, with clear skies and winds within acceptable limits for the planned landing on Runway 33, enabling a direct approach without alternate site considerations. The Terminal Area Energy Management (TAEM) phase commenced at approximately 2.5 and 50,000 feet altitude, about 40 nautical miles from the runway threshold, where the crew transitioned to manual piloting for energy dissipation through S-turns and speedbrake deployment, ensuring precise alignment with the glide slope. Communications experienced a standard S-band blackout period of about 12-16 minutes due to the ionized plasma sheath enveloping the vehicle during peak heating, beginning shortly after entry interface and lasting until the plasma density decreased sufficiently. Signal re-acquisition occurred over the as emerged from the blackout on its toward the eastern U.S. coast, restoring voice and links with Mission Control for the final approach guidance.

Post-Landing

Columbia touched down on Runway 33 at on April 8, 1997, at 2:33:11 p.m. EDT, marking the end of the abbreviated STS-83 mission after a rollout distance of 8,602 feet in 59 seconds. The total mission duration was 3 days, 23 hours, 13 minutes, and 38 seconds, significantly shorter than the planned 16 days due to the fuel cell anomaly. Following wheels stop, ground crews initiated safing procedures to secure the orbiter, including powerdown of the s to prevent overheating and securement of payloads within the Microgravity Science Laboratory-1 (MSL-1). The crew then egressed the vehicle via the crew transport vehicle, assisted by recovery teams positioned along the runway. Initial post-landing activities included a medical evaluation of the crew, which confirmed all members were in nominal condition despite the mission's brevity and the stresses of early termination. The crew also conducted an onboard recordings review as part of the preliminary debrief, documenting key events such as the fuel cell failure and in-flight operations for later analysis. MSL-1 experiment samples were carefully preserved during vehicle safing and transferred to ground facilities for detailed , enabling recovery of from the partial mission operations. Although the shortened flight limited overall science return, the returned materials supported initial findings in microgravity combustion, fluid physics, and .

Reflight

STS-94 Overview

STS-94, the reflight of the Microgravity Science Laboratory-1 (MSL-1) mission, launched aboard from 39A at NASA's on July 1, 1997, at 2:02 p.m. EDT. The mission lasted 15 days, 16 hours, 44 minutes, and 34 seconds, concluding with a landing at on July 17, 1997, at 6:46 a.m. EDT during the 251st orbit. This reflight marked the first time in Space Shuttle program history that the same orbiter, crew, and primary payload were reused to complete unfinished objectives from the prior mission. The crew consisted of the same seven members from STS-83: Commander Jr., Pilot Susan L. Still, Payload Commander , Mission Specialists and Michael L. Gernhardt, and Payload Specialists Roger K. Crouch and Gregory J. Linteris. This full crew overlap marked the first time in Space Shuttle history that the entire crew repeated a mission, enabling the team to focus on scientific operations without retraining. The seven-member crew operated in two shifts to maximize efficiency during the extended flight. STS-94 successfully executed the full MSL-1 , completing all 25 primary experiments, four investigations, and four studies dedicated to microgravity research in fluid physics, , , and . These investigations, contributed by scientists from , the , and other international partners, benefited from extended data collection periods not possible in the abbreviated STS-83 flight, yielding comprehensive results that validated microgravity processing techniques for future missions. Over the course of 251 orbits, the mission covered more than 6 million miles, demonstrating the reliability of the refurbished and advancing understanding of material behavior in low-gravity environments.

Key Differences

STS-94 successfully completed the full 16-day mission profile originally planned for STS-83, which was truncated to approximately four days due to the anomaly, allowing the reflight to achieve 100% of its scientific objectives compared to approximately 35% on the abbreviated STS-83 mission. This extended duration enabled comprehensive execution of the Microgravity Science Laboratory-1 (MSL-1) , including 33 investigations across , , and materials processing, whereas STS-83 only partially activated facilities like the and Advanced Automated Directional Solidification Furnace before early termination. The for STS-94 consisted of the identical seven members from STS-83—Commander Jr., Pilot Susan L. Still, Payload Commander , and Mission Specialists , Michael L. Gernhardt, along with Payload Specialists Roger K. Crouch and Gregory J. Linteris—ensuring seamless continuity and leveraging prior mission experience without any adjustments to the core team. This full overlap marked the first instance in history where more than two crew members repeated an entire mission, facilitating direct knowledge transfer for operational efficiency. Prior to STS-94 launch, conducted extensive inspections and maintenance on Columbia's systems, including disassembly and testing of the problematic No. 2 from STS-83 to identify and mitigate voltage drop issues, while implementing enhanced real-time monitoring protocols derived from data captured during the original flight. These modifications prevented recurrence of the anomaly, enabling uninterrupted power supply throughout the extended mission duration. The prolonged microgravity exposure on STS-94 yielded deeper scientific insights than the limited runs on STS-83, such as extended experiments that revealed a novel flame extinction mechanism and allowed burns of the weakest flames ever observed at 1 watt, alongside achieving the highest in-space temperatures of 2,000°C and undercooling of 340°C for materials studies. Combined datasets from both missions supported influential publications, including analyses of stable flame balls in microgravity that advanced theory and applications for future like the .

References

  1. [1]
    STS-83 - NASA
    STS-83 launched aboard the Space Shuttle Columbia on April 4, 1997. The five launched again in July 1997 for the STS-94 mission.
  2. [2]
    STS-94 - NASA
    The 25 primary experiments, four glovebox investigations and four accelerometer studies on MSL-1 were contributed by scientists from NASA, the European Space ...<|control11|><|separator|>
  3. [3]
    None
    Below is a merged summary of the MSL-1 Mission on STS-83 and STS-94, consolidating all information from the provided segments into a comprehensive response. To retain maximum detail, I will use a combination of narrative text and tables in CSV format where appropriate (e.g., for experiments, objectives, and partners). The response is organized by key sections: Abstract, Introduction, Objectives, Experiments, International Partners, Planned Duration, and Useful URLs.
  4. [4]
    [PDF] ' '<_:""<_ REFLIGHT OF THE FIRST MICROGRAVITY SCIENCE ...
    Experiments focused primarily in the areas of protein crystal growth, metals and alloys, combustion physics, and microgravity measurements.Missing: objectives | Show results with:objectives
  5. [5]
    [PDF] James Halsell - Biographical Data
    NASA EXPERIENCE: Selected by NASA in January 1990, Halsell became an astronaut in July 1991. A five flight veteran,. Halsell has logged over 1,250 hours in ...
  6. [6]
    [PDF] Susan Kilrain - Biographical Data
    Married to Colin. James Kilrain of Braintree, Massachusetts. She enjoys triathlons, martial arts, and playing the piano. Her parents, Joe and Sue Still, reside ...
  7. [7]
    [PDF] Janice Voss - NASA
    PERSONAL DATA: Born October 8, 1956, in South Bend, Indiana, but considered. Rockford, Illinois, to be her hometown. Died on February 6, 2012, after battling ...
  8. [8]
    [PDF] Biographical Data - NASA
    DONALD A. THOMAS (PH.D.) NASA ASTRONAUT (FORMER). PERSONAL DATA: Born May 6, 1955, in Cleveland, Ohio. Married to the former. Simone Lehmann of Göppingen ...
  9. [9]
    [PDF] Michael Gernhardt - Biographical Data
    Gernhardt was selected by NASA in March 1992, and reported to the Johnson Space Center in. August 1992. Technical assignments to date include: flight software ...
  10. [10]
    [PDF] Payload Specialist Bio: Roger Crouch (11/2005) - NASA
    May 3, 2017 · PERSONAL DATA: Born September 12, 1940, in Jamestown, Tennessee. Currently resides in Washington, DC with his wife the former Anne Novotny. He ...
  11. [11]
    [PDF] Payload Specialist Bio: Gregory T. Linteris 7/97 - NASA
    May 3, 2017 · PERSONAL DATA: Born October 4, 1957, in Demarest, New Jersey, where his parents, Lino Luigi Linteris and. Helen Mary Linteris reside. Single.
  12. [12]
    STS-83 Fact Sheet | Spaceline
    Mission Summary: The primary payload, the pressurized Microgravity Science Laboratory-1 (MSL-1) housed in Columbia's cargo bay, was being flown for the first ...Missing: details PDF
  13. [13]
    Paul Ronney's Perspective on Space Flight Training - USC
    Of course all such selections have to be approved by NASA. Payload specialists are not present on most missions and it's not clear if any will be chosen in the ...<|control11|><|separator|>
  14. [14]
    STS-83 Day 02 - NASA Technical Reports Server (NTRS)
    Jul 2, 1997 · The astronauts are split into red and blue teams, each working a 12-hour shift, to allow around-the-clock operations in the pressurized Spacelab ...Missing: preparation | Show results with:preparation<|control11|><|separator|>
  15. [15]
    STS-83
    Jun 29, 2001 · On Thursday, 3/20/97, following completion of the Flight Readiness Review, NASA managers set April 3, 1997, as the official launch date for ...
  16. [16]
    STS-83
    NASA Official Mission Summary: STS-83 (MSL-1) Columbia Pad A 83rd Shuttle mission 22nd flight OV-102. Shortened mission (3rd due to technical problem) 36th ...
  17. [17]
    STS-83 Day 04 - NASA Technical Reports Server (NTRS)
    STS-83 Day 04 On this fourth day of the STS-83 mission, the flight crew, Cmdr. James D. Halsell, Jr. Pilot Susan L. Still, Payload Cmdr, Janice E. Voss ...
  18. [18]
    Llis - NASA Lessons Learned
    During the STS-83 mission, one of the fuel cells exhibited a degraded substack 3 (CPM channel 3) voltage measurement, having a steady slope toward the CPM ...
  19. [19]
    Episode 165: STS-83 - Substack Attack (MSL-1) · The Space Above Us
    Sep 10, 2022 · The crew of STS-83 is ready for a 16 day flight aboard Space Shuttle Columbia, with Spacelab packed full of materials science experiments.<|control11|><|separator|>
  20. [20]
    “The Sting of Coming Home Early”: The Premature Return of STS-83 ...
    Apr 8, 2022 · Launched on 4 April 1997, STS-83 was the Microgravity Science Laboratory (MSL-1) mission, devoted to materials research, combustion science and ...
  21. [21]
    [PDF] SPACE SHUTTLE MISSIONS SUMMARY
    The NASA STI. Program Office provides access to the NASA STI. Database, the largest collection of aeronautical and space science STI in the world. The Program ...
  22. [22]
    [PDF] Returning from Space: Re-entry
    necessary information to do a deorbit burn. This burn changes the. Shuttle's trajectory to re-enter the atmosphere by establishing a –1° to – 2° re-entry ...Missing: 83 | Show results with:83
  23. [23]
    [PDF] SPACE SHUTTLE ORBITER ENTRY HEATING AND TPS RESPONSE
    The only exception is that internal free convection was found to be significant in limiting the peak temperature of the structure in areas which do not have ...
  24. [24]
    [PDF] Causes and Mitigation of Radio Frequency (RF) Blackout During ...
    Jan 26, 2007 · RF blackout is caused by plasma generation around vehicles during reentry. Mitigation methods and frequency band selection were assessed.
  25. [25]
    [PDF] Space Shuttle: Orbiter Processing - NASA facts
    The process actually begins at the end of each flight, with a landing at the center or, after landing at an alternate site, the return of the orbiter atop a.
  26. [26]
    STS-83 Postflight Presentation - NASA Technical Reports Server
    Included in the presentation are an introduction of the crew and a short briefing by Cmdr. Halsell, the launch and ascent narrated by Still, Spacelab Module ...<|control11|><|separator|>
  27. [27]
    Microgravity Science Laboratory (MSL-1) - NASA Technical Reports ...
    Nov 1, 1998 · The MSL-1 payload first flew on the Space Shuttle Columbia (STS-83) April 4-8, 1997. Due to a fuel cell problem, the mission was cut short, ...Missing: objectives | Show results with:objectives
  28. [28]
    STS-94 Fact Sheet | Spaceline
    STS-94 marked the first re-flight of the same vehicle, crew and payload in the history of the Space Shuttle program.Missing: mass volume
  29. [29]
    [PDF] Experimental Study of Flame Balls in Space: Preliminary Results ...
    Two space-based experiments on STS-83 have shown that ame balls are in fact stable for very long periods of time in a microgravity environment.This was the ...