Unified Soil Classification System
The Unified Soil Classification System (USCS) is a standardized engineering classification method that categorizes soils into 15 groups based on their particle-size distribution, gradation, Atterberg limits (liquid limit and plasticity index), and organic content to assess their suitability for construction and predict engineering behavior such as strength, permeability, and compressibility.[1][2] Developed in 1952 by the U.S. Army Corps of Engineers and the Bureau of Reclamation, building upon the Airfield Classification System created by Arthur Casagrande in the early 1940s for military construction, particularly airfields, it was later expanded for broader civil engineering applications, including foundations, embankments, and pavements.[1][3] The system divides soils into three primary categories: coarse-grained soils (more than 50% of particles larger than the No. 200 sieve, 0.075 mm, including gravels [G] and sands [S], further subdivided by gradation as well-graded [W] or poorly graded [P], and presence of fines); fine-grained soils (50% or more passing the No. 200 sieve, including silts [M] and clays [C], classified using a plasticity chart with the A-line to distinguish low-plasticity [L, liquid limit ≤50] from high-plasticity [H, liquid limit >50] types); and highly organic soils (such as peat [PT], organic silts [OL], and organic clays [OH], identified by dark color, organic odor, and high moisture content).[2][3] Classification typically involves laboratory tests like sieve analysis (ASTM D6913) and hydrometer analysis for particle sizes, combined with Atterberg limits (ASTM D4318), though field identification relies on visual and manual procedures for preliminary assessments.[3][4] Standardized as ASTM D2487 since 1958 (with revisions, latest reapproved in 2025), the USCS promotes uniformity across agencies like the U.S. Army Corps of Engineers, USDA Natural Resources Conservation Service, and state departments of transportation for geotechnical design, site characterization, and material selection in projects such as dams, roads, and retaining structures.[3][5] Unlike texture-based systems like USDA soil taxonomy, which focus on agricultural properties, or the AASHTO system for highway subgrades, the USCS emphasizes engineering performance and requires quantitative data for precise grouping, making it more comprehensive for non-cohesive and cohesive soil evaluation.[2][4]History and Development
Origins
The Unified Soil Classification System (USCS) originated during World War II as a response to the urgent needs of military engineering projects, particularly the construction of airfields and related infrastructure. In 1942, Arthur Casagrande, a pioneering soil mechanics expert at Harvard University, developed the initial "Airfield Classification System" for the U.S. Army Corps of Engineers to enable rapid and reliable assessment of soil suitability under wartime constraints. This effort addressed the limitations of existing classification methods, which varied widely across agencies and were often inadequate for diverse soil types encountered in global military operations. Casagrande's work built on his earlier training of over 400 Army officers in soil mechanics between 1940 and 1942, emphasizing practical evaluation techniques for airfield stability.[6][7] The primary purpose of the system was to unify inconsistent soil classification approaches used in military engineering, providing a standardized framework that considered both particle size distribution and plasticity to predict engineering behavior. Casagrande's 1948 publication, "Classification and Identification of Soils," formalized this unified approach, extending its applicability to both coarse-grained and fine-grained soils in varied environmental conditions. Foundational tests such as the Atterberg limits were incorporated early to quantify plasticity, reflecting Casagrande's broader contributions to soil mechanics research. This development was driven by the need for a versatile system that could handle the rapid infrastructure demands of the war, where soils had to support heavy loads with minimal preparation.[8][1] Following the war, the system's emphasis on standardized soil assessment gained further traction amid the post-WWII boom in civilian infrastructure, such as highways and dams, where consistent classification was essential for efficient design and construction. The USCS thus transitioned from a military tool to a foundational method in geotechnical engineering, highlighting the shift toward unified standards in an era of expansive building projects.[6]Standardization and Evolution
The Unified Soil Classification System (USCS) was formally adopted in January 1952 by the U.S. Army Corps of Engineers and the U.S. Bureau of Reclamation as a standardized method for classifying soils in engineering projects, building on earlier work by Arthur Casagrande during World War II for airfield construction.[6][3] This joint adoption, documented in the Bureau of Reclamation's Report No. EM-307 dated July 25, 1952, established the USCS as the official system for evaluating soil behavior in applications such as dams, embankments, and foundations, ensuring consistency across federal agencies.[6] In 1966, the American Society for Testing and Materials (ASTM) incorporated the USCS into its standard D2487, "Standard Practice for Classification of Soils for Engineering Purposes," which provided a formalized framework based on laboratory tests including particle-size distribution, liquid limit, and plasticity index.[3] Subsequent revisions to ASTM D2487 have refined these criteria; for instance, the 2017 edition (D2487-17, reapproved 2025) updated specifications for particle-size characteristics and Atterberg limits to better align with modern testing practices and engineering needs.[3][9] Criteria for organic soils, including the PT group for peat, were included in the original system to address their distinct compressibility and drainage properties, with further refinements in later editions such as the 1983 revision for organic silts and clays.[6] The system evolved further to incorporate visual-manual field classification methods, outlined in ASTM D2488, enabling preliminary soil identification without full laboratory analysis through simple observations of texture, color, and manual tests like the thread-rolling procedure. These field procedures, introduced in the 1960s and refined in later editions, support rapid on-site evaluations during construction and exploration. Additionally, refinements to plasticity boundaries, such as adjustments to the A-line on the plasticity chart, were made based on engineering feedback from practical applications, improving the distinction between silt and clay behaviors in response to observed performance issues in projects.[10]Fundamental Principles
Soil Components and Grain Sizes
The Unified Soil Classification System (USCS) categorizes soils based on their physical components, primarily defined by particle size distributions determined through mechanical sieving and sedimentation analysis. These components include gravel, sand, silt, and clay, each delineated by specific grain size boundaries established in ASTM standards. Gravel consists of particles larger than 4.75 mm, sand ranges from 0.075 mm to 4.75 mm, silt from 0.002 mm to 0.075 mm, and clay smaller than 0.002 mm.[11][12] Grain size boundaries in USCS align with ASTM sieve specifications, facilitating standardized laboratory testing. Key sieves include the No. 4 sieve at 4.75 mm (separating gravel from sand), No. 10 at 2.00 mm (distinguishing coarse sand), No. 40 at 0.425 mm (marking medium to fine sand transitions), and No. 200 at 0.075 mm (demarcating coarse from fine particles). These sieves enable precise quantification of particle fractions during sieve analysis, as outlined in ASTM D6913 for sieve analysis and ASTM D7928 for hydrometer analysis of fines.[12][3] A fundamental distinction in USCS preliminary classification hinges on the percentage of coarse versus fine particles. Soils are deemed coarse-grained if more than 50% of the material is retained on the No. 200 sieve (i.e., particles larger than 0.075 mm), indicating dominance by gravel and sand; conversely, fine-grained soils have 50% or more passing the No. 200 sieve, dominated by silt and clay. This threshold, derived from engineering behavior correlations, guides initial grouping before finer assessments like Atterberg limits for the fine fraction.[11][12] Within coarse-grained soils, gradation—referring to the distribution of particle sizes—plays a key role in preliminary sorting by assessing uniformity and range. Well-graded soils exhibit a broad, continuous spectrum of sizes with substantial intermediate particles, promoting interlocking and stability; poorly graded soils, by contrast, feature narrow size ranges or gaps, leading to lower density potential. This qualitative evaluation, often quantified via sieve analysis results, influences sub-classifications such as clean versus fines-contaminated gravels and sands.[11][12]Atterberg Limits and Plasticity
The Atterberg limits are a set of empirical measures that define the boundaries of different states of consistency for fine-grained soils based on their water content, playing a central role in the Unified Soil Classification System (USCS) for engineering purposes. The liquid limit (LL) is the water content, expressed as a percentage of the soil's dry mass, at which the soil transitions from a plastic state to a viscous liquid state, behaving as a fluid and flowing to close a standard groove under the impact of a cup. The plastic limit (PL) represents the minimum water content at which the soil remains plastic, meaning it can be molded or rolled without cracking or crumbling. The plasticity index (PI) is calculated as the difference between the liquid limit and the plastic limit, PI = LL - PL, providing a quantitative measure of the range of water contents over which the soil exhibits plastic behavior. These limits are determined through standardized laboratory tests outlined in ASTM D4318. The liquid limit is most commonly measured using the Casagrande cup method, where a soil pat is placed in a brass cup, a groove is formed with a standard tool, and the cup is dropped from a height of 10 mm until the groove closes over a 13 mm distance; the water content corresponding to 25 blows is taken as the LL. The plastic limit is assessed by repeatedly rolling a soil thread approximately 3 mm in diameter until it crumbles, with the water content at that point defined as the PL. These methods, adapted from earlier work by Albert Atterberg and refined by Arthur Casagrande, ensure reproducible results for classifying soil behavior under varying moisture conditions.[8] In the USCS, as defined in ASTM D2487, Atterberg limits are essential for characterizing the fine-grained soil fraction—particles passing the No. 200 sieve (0.075 mm)—and distinguishing between silty and clayey behaviors using the plasticity chart, where the A-line (PI = 0.73(LL - 20)) separates clays (above the line) from silts (below the line). For soils with liquid limit less than 50, those plotting below the A-line or with PI < 4 are classified as inorganic silts (ML), while those plotting above the A-line are inorganic clays of low plasticity (CL); soils with 4 ≤ PI ≤ 7 plotting above the A-line may be designated as silty clays (CL-ML). For example, inorganic fine-grained soils with LL ≥ 50 that plot on or above the A-line are designated as high-plasticity clays (CH group), reflecting their expansive and compressible nature in engineering applications. Additionally, Atterberg limits help differentiate inorganic from organic soils; a soil is considered organic if the liquid limit after oven-drying at 110°C is less than 75% of the liquid limit of the natural (undried) soil, due to the decomposition of organic matter affecting water retention.[3]Classification Procedure
Sample Preparation and Testing
Sample preparation for the Unified Soil Classification System (USCS) begins with selecting appropriate sample types, either disturbed or undisturbed, depending on the soil's cohesion and the need to preserve natural structure. Disturbed samples are suitable for most classification purposes as they allow for easier processing, while undisturbed samples are preferred for cohesive or organic soils to maintain natural moisture content and minimize alterations to particle aggregation. According to ASTM D2487, samples should be prepared using the wet method for cohesive and organic soils to retain as much natural water content as possible, or the air-dry method for non-organic soils when drying does not significantly affect results. Minimum sample sizes are specified to ensure representative testing; for example, field samples should be 2 to 4 times larger than the minimum required by ASTM D6913 for sieve analysis, with reporting required if smaller sizes are used.[13] Typical minimum dry masses include 100 g for material where 99% or more passes the No. 4 (4.75-mm) sieve (predominantly fines), and 500 g for material up to 9.5 mm (3/8 in.) maximum size (common for coarse-grained soils).[13]| Maximum Particle Size | Minimum Dry Mass of Specimen (g) |
|---|---|
| 4.75 mm (No. 4) | 100 |
| 9.5 mm (3/8 in.) | 500 |
| 19.0 mm (3/4 in.) | 2,500 |
| 37.5 mm (1 1/2 in.) | 5,000 |
| 75 mm (3 in.) | 10,000 |
Identification and Group Assignment
The identification and group assignment in the Unified Soil Classification System (USCS) follows a systematic, step-by-step procedure that utilizes laboratory test results on particle size distribution and plasticity characteristics to categorize soils into appropriate groups. This process begins with determining the percentage of fines in the soil sample, which serves as the primary decision point for distinguishing between coarse-grained and fine-grained soils. Atterberg limits, including liquid limit (LL) and plasticity index (PI), provide essential input data for further refinement in fine-grained classifications. The first step involves calculating the percent fines, defined as the percentage by dry weight of the soil passing the No. 200 sieve (75 μm). If 50% or more of the sample passes this sieve, the soil is classified as fine-grained; conversely, if more than 50% is retained on the sieve, it is classified as coarse-grained.[15] For coarse-grained soils, the next step evaluates gradation using coefficients of uniformity (Cu) and curvature (Cc), derived from the particle-size distribution curve. Cu is computed as Cu = \frac{D_{60}}{D_{10}}, where D_{60} and D_{10} are the effective sizes corresponding to 60% and 10% finer, respectively; Cc is calculated as Cc = \frac{(D_{30})^2}{D_{10} \times D_{60}}, with D_{30} at 30% finer. The soil is considered well-graded if Cu ≥ 4 for gravels or ≥ 6 for sands, and 1 ≤ Cc ≤ 3; otherwise, it is poorly graded.[15] For fine-grained soils, classification proceeds by plotting the LL and PI on the plasticity chart. Soils plotting above the A-line, defined by the equation PI = 0.73(LL - 20), are assigned to high-plasticity groups, while those below or to the left are low-plasticity; the A-line separates clayey (CL/CH) from silty (ML/MH) behaviors.[15] Borderline cases, such as soils with 5-12% fines in coarse-grained categories or points in the crosshatched region of the plasticity chart for fines, require dual symbols to reflect mixed characteristics, for example, GM-GC for gravels with both silty and clayey fines.[15]Soil Groups and Criteria
Coarse-Grained Soils
Coarse-grained soils in the Unified Soil Classification System (USCS) are defined as those containing more than 50% of particles retained on the No. 200 sieve (75 μm), indicating a predominance of gravel, sand, or their mixtures with limited fines. These soils are further subdivided based on the distribution within the coarse fraction: gravels (G) when more than 50% of the coarse material is retained on the No. 4 sieve (4.75 mm), and sands (S) when 50% or more of the coarse fraction passes the No. 4 sieve. Classification emphasizes gradation and the amount and nature of fines (particles passing the No. 200 sieve), with engineering behavior largely influenced by particle size distribution and drainage potential.[1] The primary groups for clean coarse-grained soils—those with less than 5% fines—include well-graded and poorly graded variants. Well-graded gravels (GW) exhibit a uniform particle size distribution, quantified by a coefficient of uniformity (Cu) ≥ 4 and coefficient of curvature (Cc) between 1 and 3, providing excellent structural stability due to interlocking particles. Poorly graded gravels (GP) fail these gradation criteria (Cu < 4 and/or Cc outside 1–3), resulting in more uniform particle sizes that may lead to lower density under compaction but still offer high permeability. Similarly, well-graded sands (SW) require Cu ≥ 6 and 1 ≤ Cc ≤ 3 for classification, while poorly graded sands (SP) do not meet these thresholds, often behaving as loose fills unless densely compacted. Gradation is calculated from sieve analysis as Cu = D60/D10 and Cc = (D30)^2 / (D10 × D60), where D represents the particle diameter at the specified cumulative percentage passing. Coarse-grained soils with fines (5–12% or more) are classified as "dirty" groups based on the plasticity of the fines fraction. Silty gravels (GM) and silty sands (SM) contain 12% or more fines that exhibit low plasticity (plasticity index, PI < 4 or below the A-line on the plasticity chart), leading to reduced drainage compared to clean soils. Clayey gravels (GC) and clayey sands (SC) have fines that plot on or above the A-line (classified as CL or CH), imparting cohesive properties that increase shear strength but lower permeability. For soils with 5–12% fines, dual symbols (e.g., GW-GM) are assigned if the material borders clean and dirty classifications.| Group | Description | Key Criteria | Typical Engineering Properties |
|---|---|---|---|
| GW | Well-graded gravel | >50% gravel-sized, <5% fines, Cu ≥ 4, 1 ≤ Cc ≤ 3 | High permeability (>10^{-2} cm/s), excellent drainage, very high shear strength, low compressibility; suitable for base courses and embankments.[1] |
| GP | Poorly graded gravel | >50% gravel-sized, <5% fines, not well-graded | High permeability (>10^{-2} cm/s), excellent drainage, high shear strength, low compressibility; used in drainage layers and pervious shells.[1] |
| GM | Silty gravel | >50% gravel-sized, ≥12% fines, low PI (<4 or below A-line) | Moderate permeability (10^{-3} to 10^{-6} cm/s), fair to poor drainage, moderate shear strength, low to moderate compressibility; applied in subbases and impervious cores.[1] |
| GC | Clayey gravel | >50% gravel-sized, ≥12% fines, fines plot on or above A-line | Low permeability (10^{-6} to 10^{-8} cm/s), poor drainage, moderate shear strength, moderate compressibility; suitable for embankments and impervious fills.[1] |
| SW | Well-graded sand | >50% sand-sized, <5% fines, Cu ≥ 6, 1 ≤ Cc ≤ 3 | High permeability (>10^{-3} cm/s), good drainage, very high shear strength, low compressibility; ideal for base courses and slope protection.[1] |
| SP | Poorly graded sand | >50% sand-sized, <5% fines, not well-graded | High permeability (>10^{-3} cm/s), good drainage, moderate to high shear strength, low compressibility; used in drainage and flat-slope dikes.[1] |
| SM | Silty sand | >50% sand-sized, ≥12% fines, low PI (<4 or below A-line) | Moderate permeability (10^{-3} to 10^{-6} cm/s), fair to poor drainage, moderate shear strength, low to moderate compressibility; for subbases and fills.[1] |
| SC | Clayey sand | >50% sand-sized, ≥12% fines, fines plot on or above A-line | Low permeability (10^{-6} to 10^{-8} cm/s), poor drainage, moderate shear strength, moderate compressibility; employed in embankments and subgrades.[1] |
Fine-Grained Soils
Fine-grained soils in the Unified Soil Classification System (USCS) are defined as those containing 50% or more material passing the No. 200 sieve (75 μm opening), distinguishing them from coarse-grained soils by their dominant fine particle fraction that imparts plasticity and cohesion. Classification of these soils relies on Atterberg limits—specifically the liquid limit (LL) and plasticity index (PI)—plotted on the plasticity chart, where the A-line serves as the boundary separating silty from clayey behavior. Inorganic fine-grained soils are subdivided into four primary groups: ML (inorganic silts, including rock flour, silty or clayey fine sands, or a mixture of fine-grained soil with nonplastic silt), CL (inorganic clays of low to medium plasticity, gravelly clays, sandy clays, silty clays, or lean clays), MH (inorganic silts of high plasticity, elastic silts), and CH (inorganic clays of high plasticity, fat clays). To distinguish inorganic from organic fine-grained soils, a sample is oven-dried at 110°C; if the LL after drying is less than 75% of the original LL, the soil is classified as organic (OL for low LL <50 or OH for high LL ≥50), but this section focuses on inorganic types.[12] The specific criteria for each group are as follows:| Group | Description | Liquid Limit (LL) | Plasticity Index (PI) and Chart Position |
|---|---|---|---|
| ML | Inorganic silts, very fine sands, rock flour, or silty/clayey fine sands | < 50 | < 4 or plots below the A-line |
| CL | Inorganic clays of low to medium plasticity, lean clays, or silty clays | < 50 | Plots on or above the A-line (typically PI > 4 and ≤ 7 for borderline CL-ML) |
| MH | Inorganic silts of high plasticity or elastic silts | ≥ 50 | < 4 or plots below the A-line |
| CH | Inorganic clays of high plasticity or fat clays | ≥ 50 | Plots on or above the A-line |
Organic Soils
Organic soils in the Unified Soil Classification System (USCS) are distinguished from inorganic soils by their significant organic matter content, which alters their engineering properties and requires specific identification tests. These soils are classified into three main groups: OL for low-plasticity organic silts and clays (liquid limit less than 50), OH for high-plasticity organic silts and clays (liquid limit 50 or greater), and PT for peat and other highly organic soils. The distinction from inorganic fine-grained soils relies on organic content exceeding 30% by dry weight, often detected through preliminary Atterberg limit tests showing a substantial reduction in plasticity upon drying.[17] Identification criteria for OL and OH groups include a dark brown to black color, an organic odor, and a key laboratory test where the liquid limit after oven drying at 105–110°C is less than 75% of the liquid limit before drying (i.e., a decrease greater than 25%). This ratio test, per ASTM D2487, indicates organic influence starting at approximately 15–30% organic content by dry weight. For the PT group, classification emphasizes visual and manual characteristics such as a dark brown to black color, organic odor, and a fibrous, spongy, or amorphous texture with recognizable plant remains; these soils have high organic content (typically >30–50% by dry weight, which can be quantified by loss on ignition test showing low ash content).[2][18][17] Engineering behavior of organic soils is dominated by their high organic content, leading to exceptional compressibility, low shear strength, and poor load-bearing capacity, making them generally unsuitable for foundation support without stabilization treatments like preloading or chemical admixture. PT soils, in particular, display high void ratios and secondary compression rates up to 0.06 times the compression index, far exceeding those of inorganic clays, while also exhibiting elevated permeability (100–1,000 times higher than clays). These properties stem from the decomposition-resistant organic fibers that create a spongy structure, resulting in excessive settlement under load and potential long-term creep.[17][12]Symbol Chart
Major Divisions and Symbols
The Unified Soil Classification System (USCS) organizes soils into major divisions based on particle size distribution and plasticity characteristics, using a hierarchical nomenclature of two-letter symbols to denote soil types. The primary divisions are coarse-grained soils (prefixed with G for gravel or S for sand), fine-grained soils (prefixed with M for silt or C for clay), and highly organic soils (prefixed with O or Pt for peat). Coarse-grained soils are defined as those retaining more than 50% of material on the No. 200 sieve (0.075 mm), while fine-grained soils pass more than 50% through this sieve; organic soils are identified by their high organic content, dark color, and characteristic odor or texture.[19][19] The symbol structure begins with the first letter indicating the dominant soil component: G for gravel (more than 50% of the coarse fraction retained on the No. 4 sieve, 4.75 mm), S for sand (more than 50% of the coarse fraction passing the No. 4 sieve), M for silt (fine-grained with low plasticity), C for clay (fine-grained with plastic behavior), O for organic silt or clay, and Pt for peat (highly fibrous organic matter). The second letter specifies gradation or plasticity: W for well-graded (coefficient of uniformity Cu ≥ 4 for gravels or ≥ 6 for sands, with coefficient of curvature Cc between 1 and 3), P for poorly graded (lacking the well-graded criteria, often uniform or gap-graded), L for low liquid limit (≤50), and H for high liquid limit (>50). Suffixes may be added for further description, such as -d for desirable (liquid limit LL ≤ 25 and PI ≤ 5, suitable for bases) or -u for undesirable (LL > 25 or PI > 5).[19][19][19][3] For soils near classification boundaries, dual symbols are used to indicate transitional properties, such as GW-GM for well-graded gravel with 5-12% silt fines or SW-SC for well-graded sand with 5-12% clay fines; these apply when fines content (passing No. 200 sieve) is between 5% and 12%, or when plasticity plots near the A-line boundary.[19][19] The following table summarizes key USCS group symbols, their meanings, and brief criteria recaps:| Symbol | Meaning | Brief Criteria Recap |
|---|---|---|
| GW | Well-graded gravel | <5% fines; Cu ≥ 4, 1 ≤ Cc ≤ 3 |
| GP | Poorly graded gravel | <5% fines; does not meet GW criteria |
| GM | Silty gravel | ≥12% fines; low plasticity (below A-line) |
| GC | Clayey gravel | ≥12% fines; plastic (above A-line) |
| SW | Well-graded sand | <5% fines; Cu ≥ 6, 1 ≤ Cc ≤ 3 |
| SP | Poorly graded sand | <5% fines; does not meet SW criteria |
| SM | Silty sand | ≥12% fines; low plasticity (below A-line) |
| SC | Clayey sand | ≥12% fines; plastic (above A-line) |
| ML | Silt, low plasticity | Fine-grained; PI ≤ 4 and LL ≤ 50 or plots below A-line (PI < 0.73(LL-20)) |
| CL | Clay, low plasticity | Fine-grained; plots above A-line (PI > 0.73(LL-20)), LL ≤ 50 |
| MH | Silt, high plasticity | Fine-grained; plots below A-line (PI < 0.73(LL-20)), LL > 50 |
| CH | Clay, high plasticity | Fine-grained; plots above A-line (PI > 0.73(LL-20)), LL > 50 |
| OL | Organic silt/clay, low | Organic (LL_dried < 0.75 LL_undried); LL_undried ≤ 50, organic odor/texture |
| OH | Organic silt/clay, high | Organic (LL_dried < 0.75 LL_undried); LL_undried > 50, organic odor/texture |
| Pt | Peat | Primarily organic matter; fibrous, dark in color, organic odor, low density |
Plasticity Chart and Boundaries
The plasticity chart serves as a fundamental graphical tool in the Unified Soil Classification System (USCS) for classifying fine-grained soils based on their liquid limit (LL) and plasticity index (PI), which are Atterberg limits representing the moisture contents at which soil transitions between solid, plastic, and liquid states. Developed by Arthur Casagrande, this chart enables engineers to distinguish between clays and silts by plotting these limits and evaluating their position relative to empirically derived boundaries.[20] The chart features the liquid limit (LL) along the horizontal x-axis, scaled from 0 to over 100 percent, and the plasticity index (PI) along the vertical y-axis, similarly scaled from 0 to over 100 percent. The primary boundary is the A-line, an empirically derived separation between clayey and silty materials, defined by the equation: \text{PI} = 0.73(\text{LL} - 20) Soils plotting above this line exhibit clay-like behavior, while those below indicate silt-like characteristics.[20] The U-line marks the approximate upper boundary of natural soil plasticity, given by: \text{PI} = 0.9(\text{LL} - 8) with points above it considered non-standard or erroneous. Additionally, a horizontal line at LL = 50 divides soils into low-plasticity (LL < 50) and high-plasticity (LL ≥ 50) categories, influencing the final group symbol. Classification regions on the chart are delineated as follows:- Inorganic clays of low plasticity (CL) occupy the area above the A-line and below the LL = 50 line.
- Inorganic silts of low plasticity (ML) lie below the A-line with LL ≤ 50 (or PI ≤ 4).
- Inorganic clays of high plasticity (CH) are above the A-line and above the LL = 50 line.
- Inorganic silts of high plasticity (MH) fall below the A-line and above the LL = 50 line.