Fact-checked by Grok 2 weeks ago

400-series highways

The 400-series highways are a network of controlled-access highways in the Canadian province of , numbered from 400 to 451 and including the Queen Elizabeth Way (QEW), designed as high-speed thoroughfares with no at-grade intersections and stricter access and land-use controls to connect major urban centres efficiently. Maintained by the (MTO), this subset of the provincial highway system spans over 1,500 kilometres primarily in , serving as vital corridors for personal travel, freight transport, and economic activity, with typical speed limits of 100 km/h and sections up to 110 km/h. Key routes include Highway 400 (linking northward), Highway 401 (the province's longest at over 800 km, running east-west from to the border), Highway 403 (connecting to ), Highway 404 (extending from to ), Highway 407 (a tolled route across the ), Highway 410 (serving ), (Ottawa's primary east-west artery), and Highway 427 (a north-south connector in ), among others undergoing expansion and rehabilitation. The designation originated in 1952 with the opening of Highway 400 as the – Freeway, marking the start of a deliberate effort to build modern freeways distinct from the earlier numbered King's Highways (2 to 148), which often featured at-grade intersections. This initiative accelerated post-World War II to accommodate booming suburban growth, automotive adoption, and industrial expansion in the region, with additional routes like Highway 401 (initially the Trans-Provincial Highway) completed in phases through the 1950s and 1960s. Today, the network supports over 416,000 vehicles daily on busy segments like Highway 401, handling critical trade valued at hundreds of millions of dollars in goods, while ongoing projects such as the Highway 413 extension and aim to alleviate congestion amid projected to 15 million by 2051. Features like high-occupancy vehicle (HOV) lanes on routes including Highways 400, 403, 404, 410, and 427 promote efficient multi-occupant travel and reduce emissions.

History

Origins and initial construction

The origins of the 400-series highways trace back to the 1930s, when the Ontario Department of Highways began conceptualizing controlled-access divided highways to address growing traffic congestion on existing routes like Highways 11 and 27 north of Toronto. Influenced by early American models such as the Pennsylvania Turnpike and German autobahns, planners envisioned four-lane freeways with grade-separated interchanges and limited access to improve safety and efficiency amid rising automobile use. The numbering system for the 400-series was formally introduced in 1952 to differentiate these new freeways from the traditional King's Highways, which used numbers from 2 to 199; this classification highlighted their higher design standards and restricted access. In the 1940s, post-World War II reconstruction priorities accelerated planning under the Department of Highways, driven by economic recovery and rapid in the , where population growth strained local roads. The Toronto-Barrie route, later designated Highway 400, emerged as a priority to connect the city to northern recreational areas and alleviate summer traffic bottlenecks. Construction contracts for grading along a 74-kilometer alignment from to south of were awarded in 1946, marking the practical start of the 400-series builds despite wartime material shortages delaying earlier proposals. By 1948, this route was officially classified as Ontario's first extensive , emphasizing no private driveways and full interchanges. Initial construction focused on a four-lane divided highway, with northbound lanes opening on September 6, 1951, and southbound lanes completing the initial segment by December 1 of that year. The full four lanes from to opened to traffic on June 30, 1952, coinciding with the Dominion Day weekend rush and earning designation as Highway 400—the inaugural route in the series. Parallel developments included precursors to Highway 401, with the first section from West Hill to opening in 1947 as Highway 2A, and the Bypass completed in 1956; these were reclassified into the 400-series in 1952 to unify the freeway network. These early projects were funded primarily through provincial budgets, supported by the postwar economic boom that boosted vehicle ownership and urban expansion, though federal-provincial discussions under the 1949 Trans-Canada Highway Act laid groundwork for broader infrastructure coordination.

Postwar expansion and renumbering

Following the initial postwar developments, the construction of Ontario's 400-series highways accelerated significantly during the to address booming population growth and economic expansion in . The centrepiece of this effort was Highway 401, which served as the province's primary east-west artery; its full completion across occurred on October 11, 1968, spanning from to the border at a length of 817.9 km. Complementing this, Highway 403 between Oakville and opened on December 4, 1963, providing a crucial link for industrial traffic in the region. In the 1970s, the province undertook renumbering initiatives to standardize the growing freeway network, shifting select King's Highways to the 400-series designation to reflect their controlled-access status. For instance, Highway 402, originally a short approach route near designated in 1952, was extended eastward toward starting in the early 1970s, achieving full 400-series freeway configuration by the early 1980s. Key projects during this era further expanded the system, influenced by ambitious urban plans such as Toronto's Metro Expressway network proposed in the , which envisioned interconnected freeways to alleviate downtown congestion but faced partial cancellation due to public opposition. Highway 410 in opened its initial section in 1978 along Heart Lake Road, serving as an interim north-south connector from Highway 401 to Highway 7. Similarly, Highway 404 from to Newmarket had its first segment, from Highway 401 to , open in the fall of 1977, facilitating suburban growth northward. In the 1990s, the Queen Elizabeth Way was formally included in the 400-series network, reflecting its controlled-access standards. Funding for these initiatives drew from provincial revenue sources, including gas tax adjustments in the that supported amid rising vehicle ownership, while Highway 401's designation as part of the system in the late 1960s integrated it into national connectivity goals. By the , environmental considerations began shaping policy, with the introduction of the Environmental Assessment Act in 1975 requiring reviews for major highway projects to evaluate ecological impacts. These expansions propelled the total 400-series network to approximately 1,000 km by 1990, solidifying its role in provincial mobility.

Recent developments and modernizations

In 1999, the Ontario government privatized Highway 407 through a 99-year lease to a private consortium for $3.1 billion, marking a significant shift toward public-private partnerships in highway management and introducing the world's first fully electronic tolling system without booths, which relied on transponders and license plate recognition for automated billing. This privatization facilitated ongoing operations and expansions, including the Highway 407 East Phase 2 project, which extended the route approximately 22 kilometers from Harmony Road in Oshawa to Highway 35/115 in Clarington; while initial planning dates back to the early 2000s, construction advanced through the 2010s following environmental assessments, which opened on December 9, 2019, with the provincially owned eastern segment becoming toll-free as of June 1, 2025. Major widening initiatives addressed growing congestion in the during the 2010s and 2020s. The Highway 401 expansion in the western GTA, spanning about 18 kilometers from Highway 410 to Highway 403, increased capacity through additional lanes and interchanges, with key segments reaching up to 12 lanes in high-traffic areas like , completed in 2023 to improve goods movement and commuter flow. In northern directions, Highway 400 was widened from Major Mackenzie Drive to King Road, a project completed on January 28, 2025, to enhance safety and reliability for long-haul traffic. Similarly, Highway 404 was widened 11 km from Highway 407 to Stouffville Road, adding a in each direction, completing on January 28, 2025, as part of broader efforts to support economic growth in York Region. Policy advancements included the integration of intelligent transportation systems, with the Ontario-Québec Smart Corridor initiative launching its concept of operations in 2015 to deploy technologies like real-time traffic monitoring, variable message signs, and connected vehicle systems across key 400-series routes for better incident management and efficiency. Legal and environmental hurdles shaped extensions, such as the 2011 federal comprehensive study under the Canadian Environmental Assessment Act for the 407 East corridor, which addressed ecological impacts like wetland preservation and species protection amid public consultations in the 2010s. During the COVID-19 pandemic, Highway 401 experienced reduced volumes but no widespread temporary lane reversals; instead, authorities focused on maintenance and rapid response to fluctuating demand. Provincial infrastructure commitments, outlined in multi-year programs like the 2025-2028 Southern Highways Program, emphasized ongoing expansions and rehabilitations across thousands of kilometers of 400-series routes to combat gridlock and bolster trade corridors.

Design features

Geometric and structural standards

The 400-series highways adhere to stringent geometric standards established by the Ministry of Transportation (MTO) to support high-speed, controlled-access travel. These freeways feature a minimum standard cross-section of four divided lanes, with each travel lane measuring 3.75 meters in width to accommodate both passenger vehicles and commercial traffic, though median lanes may be 3.5 meters. Paved right shoulders are standardized at 3.0 meters, with left (median) shoulders at 2.5 meters when barriers are present, providing space for emergency stops and maintenance without encroaching on the traveled way. Interchange designs prioritize to eliminate at-grade intersections entirely, ensuring uninterrupted flow on the mainline. Major rural junctions commonly employ full cloverleaf interchanges for their efficient handling of high-volume turns, while interchanges are used where space is limited or for connections to arterial roads. In urban settings, partial cloverleaf (parclo) interchanges predominate, as developed by the MTO to replace traditional cloverleaves and reduce conflicts in denser environments. Bridge and structural elements are engineered for durability and clearance, with a minimum vertical clearance of 4.8 meters over the roadway for new bridges to allow passage of oversized vehicles. barriers are standard along medians and shoulders to prevent cross-median crashes, particularly in divided sections, while noise walls are incorporated in populated areas to mitigate acoustic impacts from . Horizontal side clearances of at least 2.5 meters are required for freeways with speeds of 100–130 km/h. Design standards have evolved since the postwar era, with 1950s-era routes like early sections of Highway 401 featuring narrower medians around 6 meters, whereas post-1980s constructions expanded medians to 10–12 meters or more to improve safety by increasing separation between opposing traffic lanes. Alignment criteria emphasize smooth, safe traversal, with maximum grades limited to 3–5% to minimize vehicle strain and braking distances, particularly on upgrades. curves are governed by speeds, typically 100 km/h for most 400-series segments, requiring minimum radii calculated to maintain lateral coefficients below 0.12 for superelevated sections.

Safety, signage, and operational rules

The posted speed limits on 400-series highways are generally 100 km/h, with 110 km/h on expanded sections as of 2024 (e.g., parts of Highways 400, 401, 403, 410, 416, 417) where geometric and environmental conditions permit safe operation. Urban portions generally feature limits between 90 and 110 km/h to accommodate higher traffic volumes and interchanges. On Highway 401 through the , variable speed limits ranging from 80 to 100 km/h are enforced via dynamic message signs, adjusting in based on , weather, and incidents to mitigate and enhance . As of 2024, the province has upgraded lighting to LEDs at over 50 locations on provincial highways, including 400-series routes, to enhance visibility and reduce energy use. Signage on the 400-series follows standards outlined in the Traffic Manual, employing green rectangular shields with white route numbers for primary identification, a consistent with controlled-access highways since Canada's in the . All measurements and limits are in units, reflecting the national shift completed by 1977. Advance condition provide warnings for high-occupancy vehicle lanes and zones, ensuring drivers are informed of eligibility and payment requirements well in advance of entry points. Key safety features include continuous rumble strips along shoulders and centerlines, which vibrate to alert drivers drifting from lanes and have contributed to reduced run-off-road incidents. is installed in urban corridors and high-volume interchanges to improve visibility during low-light conditions. Highways undergo a structured regime under the Public Transportation and Highway Improvement Act, with bridges receiving detailed assessments every two years and general maintenance checks at least biannually to uphold structural standards. Operational rules emphasize uninterrupted flow, prohibiting stopping or parking on shoulders except during emergencies or as directed by authorities, per the , to prevent secondary collisions. Commercial vehicles are subject to route-specific restrictions, such as on where loads exceeding 5,000 kg require transponders for tolling and must comply with weight limits to protect the pavement. Enforcement relies on a combination of patrols and automated systems, with photo radar piloted on 400-series routes in the mid-1990s and reintroduced in targeted areas during the to address speeding. Widening initiatives have yielded measurable safety gains on upgraded segments like portions of .

Special lane systems

High-occupancy vehicle lanes

High-occupancy vehicle (HOV) lanes on Ontario's 400-series highways are designated leftmost lanes reserved for vehicles carrying at least two occupants, including the driver, to promote carpooling and reduce overall . Eligible vehicles include passenger cars, vans, and light trucks under 6.5 metres in length and weighing no more than 4,500 kg, as well as licensed and motorcycles; commercial motor vehicles must meet the same occupancy and size criteria to access these lanes. HOV lanes exist on Highways 400, 403, 404, , 417, 427, and the Queen Elizabeth Way (QEW). On select segments of Highways 403, , and the QEW, solo drivers may use the lanes with a High-Occupancy (HOT) permit , allowing payment for access during peak periods, though multi-occupant vehicles enter for free. HOV lanes operate 24 hours a day, seven days a week, unless otherwise posted, with entry and exit permitted only at designated points spaced every two to four kilometres, marked by signage and diamond symbols on the . The implementation of HOV lanes on 400-series highways began with enabling legislation through Bill 169 in December 2003, which authorized their designation on provincial highways. The first lanes opened in December 2005 on portions of Highways 403 and 404, marking the initial rollout to encourage higher vehicle occupancy during peak travel. Expansion followed, with additional HOV lanes added to the QEW in 2010 and to Highway 410 in 2018, and further segments on Highway 400 between Major Mackenzie Drive and King Road completed around 2011, including dedicated transfer lanes for safer merging. As of 2016, these lanes spanned approximately 48.5 kilometres across Highways 403, 404, and the QEW, with ongoing widenings adding more, such as an 11-kilometre extension on Highway 404 from Highway 407 to Stouffville Road completed in January 2025. Enforcement of HOV lane rules is handled by the , utilizing overhead cameras and on-site patrols to monitor compliance; violations, such as single-occupant use, result in a fine of $110 plus three demerit points. Specific configurations vary by route: on Highway 403 between Highways 407 and 401, HOV lanes utilize the left shoulder space for multi-occupant access, while Highway 404 features a continuous northbound HOV lane adjacent to the median starting north of Sheppard Avenue, facilitating steady flow for eligible traffic. These lanes integrate with regional transit systems, allowing buses unrestricted access to expedite commuter services and support broader mobility options. HOV lanes provide key benefits by optimizing existing without requiring new , encouraging carpooling to increase average vehicle occupancy and thereby easing on general-purpose lanes. They also lower emissions through reduced idling and fuel consumption, while offering time savings for users—studies indicate well-utilized HOV facilities can enhance overall highway productivity by prioritizing high-occupancy modes. On routes like Highways 403 and 404, early evaluations post-2005 implementation showed strong peak-period usage, validating their role in managing urban freeway demand.

Toll and managed lanes

The 400-series highways feature limited tolling and managed lane systems, primarily concentrated on Highway 407, which operates as a fully tolled express route, while other routes incorporate high-occupancy toll (HOT) configurations to optimize . These systems aim to reduce through electronic tolling and variable access, distinguishing them from standard free-flow lanes by requiring payment for single-occupancy vehicles during peak periods. Highway 407 ETR spans 108 km from to Pickering and functions as a barrier-free highway relying on transponders for automatic billing, with license plate recognition for non-transponder users. Toll rates for light vehicles vary by time of day, zone, and vehicle class, ranging from approximately $0.32 to $0.85 per km in 2025 following recent adjustments that added 3 to 14 cents per km depending on conditions. The eastern extension of Highway 407, adding 43 km from Pickering to (near ), became fully operational and toll-free on June 1, 2025, integrating with the existing network but excluding it from the ETR's private regime. On Highway 401 through the section, managed lanes designated as have operated since a 2017 pilot expansion, permitting single-occupancy vehicles to access HOV lanes via variable tolls, such as around $0.30 per km during peak hours, to prioritize flow for paying users alongside carpools. Short connector routes like Highways 412 and 418, linking Highways 401 and 407 in Durham Region, were tolled from 2017 until April 2022, after which fees were eliminated, rendering them toll-free; no other 400-series highways impose general tolls. Operationally, Highway 407 ETR generates approximately $1.7 billion in annual as of , supporting and through zone- and time-based designed to sustain average speeds around 80-100 km/h, roughly double those on freeways. These dynamic elements adjust tolls to discourage overuse during peaks, ensuring reliable travel times. HOV integration allows multi-occupant vehicles discounted or free access on tolled segments during specified periods. Criticisms of these systems center on implications from continuous vehicle tracking via cameras and transponders, which has prompted investigations by Ontario's and Commissioner into data handling practices. Equity concerns also arise, as high toll rates disproportionately burden low-income drivers, limiting access to faster routes and exacerbating socioeconomic divides in the , according to analyses of the highway's privatization impacts.

Current routes

Greater Toronto Area highways

The 400-series highways form a vital network within the (GTA), facilitating high-volume commuter, commercial, and recreational traffic across , , Halton, Peel, and regions. These routes, characterized by their controlled-access design, handle millions of daily trips, with key alignments connecting urban centers, international gateways like Toronto Pearson Airport, and radial spokes to surrounding suburbs. Among them, Highway 401 stands out as the backbone east-west corridor, while north-south arterials like Highways 400, 403, , , and 427 provide essential links to northern and western suburbs. Highway 407 offers a parallel tolled alternative to alleviate congestion on the primary routes. Highway 400 serves as the principal north-south gateway from the to central Ontario's recreational regions, including destinations around and Muskoka. Spanning approximately 46 km within the from its southern terminus at the Maple Leaf Drive overpass in northward through and in York Region to Highway 88 near the border, it features key interchanges with Highway 401 at Exit 21 and Highway 407 at Exit 27. The route supports substantial seasonal traffic surges to northern resorts, with ongoing widenings to six lanes enhancing capacity in urban sections. Its full provincial length extends 226 km to near , but the segment primarily manages suburban outflows and airport access. Highway 401, the Macdonald–Cartier Freeway, traverses the as its dominant east-west artery, covering roughly 120 km from the western edge in Halton Region near to the eastern boundary in Region at Pickering. This segment includes the pioneering collector-express lane system in (Peel Region), where parallel roadways for local and through traffic span up to lanes wide, optimizing flow through densely populated areas. It intersects major radials like Highways 403, , 427, and , forming complex multi-level interchanges that handle inter-regional commerce and commuting. As of 2016, average daily traffic volumes in the portion exceeded 416,000 vehicles, including over 41,000 trucks, marking it as North America's busiest highway section and underscoring its role in valued at hundreds of millions daily. The full route measures 828 km across from to the Quebec border. Highway 403 provides a crucial southwest connection within the , linking in Peel Region to and in Halton Region over about 30 km of its total 125 km length. Beginning at the Highway 410 interchange in , it proceeds southeast through urban-industrial zones to merge with the Queen Elizabeth Way (QEW) at the Interchange near , incorporating high-occupancy vehicle (HOV) lanes from Highway 407 to Highway 401. This alignment supports commuter flows from and areas into the core , with four-to-ten-lane configurations accommodating heavy truck traffic to distribution hubs. Beyond the , it continues 82 km southwest to Highway 401 near . Highway 404, known as the Brian Highway in its northern reaches, extends 49 km entirely within the from Highway 401 in (Toronto) northward through Markham and in York Region to Woodbine Avenue in . As a radial route parallel to Highway 400 about 15 km east, it features six-to-eight lanes with HOV facilities and connects to Highway 407 in Markham, serving suburban growth and access to the . An extension northward to Mount Albert Road remains in planning stages, with intelligent transportation systems slated for implementation by 2026. Highway 407 ETR operates as a 108 km tolled east-west bypass across the , from in Halton Region to Pickering in Region, alleviating pressure on Highway 401 through parallel alignment north of the urban core. It interchanges with all major GTA radials, including Highways 400, 403, 404, 410, and 427, and includes variable tolling to manage peak-hour demand. A 40 km provincially owned extension eastward from Brock Road to Highway 35/115 in opened in phases and became toll-free as of June 1, 2025, enhancing regional connectivity without user fees. Highway 410 functions as a 22 km spur in Peel Region, branching northwest from the Highways 401/403/410 interchange in through to Highway 10 in Caledon. This four-to-six-lane route primarily serves industrial and residential traffic in Brampton's growing suburbs, featuring HOV lanes and direct access to major employment corridors like . It connects seamlessly to the broader network via its southern terminus. Highway 427, a 26 km north-south corridor, links the QEW and in () northward through to Major Mackenzie Drive in (York Region), passing directly by . Widened to six lanes with HOV facilities, it handles over 300,000 vehicles daily, providing critical access to the airport's cargo and passenger operations as well as connections to Highways 401, 407, and 409. Recent expansions, including a new northbound lane from Woodbine Avenue to Finch Avenue, have improved reliability for airport-bound traffic.

Southwestern and northern Ontario highways

The southwestern and northern Ontario segments of the 400-series highway network connect the province's border regions to major trade routes and remote northern communities, emphasizing efficient freight movement to the and access to rural areas. These routes extend west from the (GTA) through agricultural and industrial zones, while northern extensions support tourism, resource extraction, and economic development in less densely populated regions. Highway 402 provides the main controlled-access link between and , extending 102.5 km from the at the Canada–U.S. border in eastward to an interchange with Highway 401 south of . The four-lane freeway traverses Lambton and counties, passing through oil refineries, chemical plants, and farmland, with a posted of 100 km/h for most of its length. It handles substantial commercial traffic, as the is one of 's busiest border crossings for trucks, facilitating about 18% of total Canada–U.S. transborder freight value as of 2020. Adjacent to Highway 402, Highway 405 serves as a brief 8.7 km spur from the Queen Elizabeth Way (QEW) in northwest to the crossing into , surrounded largely by forested areas and minimal development. This route supports tourism and trade in the Niagara region, with the contributing to the combined border freight volume through southwestern Ontario gateways, which accounts for roughly 20% of the province's U.S.-bound truck shipments when paired with . In the Niagara Peninsula, Highway 406 functions as a 26 km urban arterial freeway connecting the QEW in northward through to East Main Street in , serving local commuters and providing access to the and industrial sites. The route features interchanges with Highway 58 and local roads, accommodating six lanes in denser sections to manage regional traffic flow. Further west near the , Highway 409 acts as a compact 5.6 km spur from Highway 427 to , linking directly to Highway 401 and easing airport access for air cargo and passengers amid Etobicoke's industrial landscape. To the north of the in Durham Region, Highways 412 and 418 form short connectors totaling about 20 km, with Highway 412 (10.2 km) linking Highways 401 and 407 in and Highway 418 (9.2 km) extending eastward in ; these four-lane routes, originally tolled but made toll-free in 2022, alleviate congestion on Highway 401 by providing direct ties to the tolled Highway 407 network. Northern extensions of the 400-series focus on upgrading rural corridors to freeway standards, particularly Highway 400's continuation toward via the twinning of Highway 69. Highway 400 currently terminates north of Parry Sound at the Highway 559 interchange, following the completion of a 26.5 km bypass around the town in 2012 to improve safety and capacity along . The ongoing four-laning of the 152 km Highway 69 from Parry Sound to —initiated under the Highway 69 Action Plan—aims to integrate it fully into the 400-series as an extension of Highway 400, with 84 km already widened as of 2025 and the final 68 km segment advancing through design and construction phases to enhance reliability for freight, emergency services, and in . These developments underscore the network's role in bridging urban centers with northern resource economies.

Eastern Ontario highways

The eastern segment of Highway 401 extends approximately 169 km from Kingston eastward to the Ontario–Quebec border near Ingleside, serving as a critical link in the province's east-west transportation network. This portion of the highway facilitates heavy freight and commuter , transitioning seamlessly into Quebec's Autoroute 20 west of . A notable feature is the system at Ivy Lea, which connects Highway 401 to U.S. across the , spanning 13.7 km and handling significant international trade volumes. The corridor plays a pivotal role in the – economic axis, supporting over $600 million in daily goods movement as of 2024 and underscoring its status as North America's busiest highway stretch. Highway 416, designated as the Veterans Memorial Highway, spans 76.4 km from its southern terminus at Highway 401 near Prescott northward to in . Constructed primarily between 1990 and 1999, it provides a direct controlled-access route through rural and Grenville County, bypassing older two-lane alignments and enhancing connectivity for communities. The highway features a consistent four-lane divided design with interchanges at key points like and North Gower, accommodating speeds up to 100 km/h. Highway 417 stretches 186 km from westward through to the Quebec border at Pointe-Fortune, forming part of the system and serving as Ottawa's primary east-west artery, known locally as the Queensway. In urban Ottawa, it includes complex distributor sections with ramps and overpasses integrating with city streets, while rural segments east of the city maintain a four- to six-lane freeway profile. Ongoing expansions, such as bridge replacements between Carling and Parkdale Avenues, address growing demand in the capital region. As of 2017, traffic volumes in Ottawa averaged around 169,000 vehicles per day near Carling Avenue, reflecting its role in regional and . Highway 420, a short 3.3 km spur in , connects the Queen Elizabeth Way to the Rainbow Bridge at the U.S. border, primarily serving tourist traffic to . Originally part of the 400-series network since 1972, its eastern extension beyond Stanley Avenue was downloaded to municipal control in 1998 and redesignated as Regional Road 102, leaving the remaining segment as a retained provincial with a reduced 80 km/h speed limit. Key features of these highways include the of urban infrastructure on , such as coordinated signal systems and proximity to the tunnel under the Queensway, which enhances multimodal access in the capital. 's eastern role bolsters the broader – corridor by enabling efficient cross-border flows via the crossing.

Future developments

Planned extensions to existing routes

Several planned extensions and upgrades to existing 400-series highways in are underway or scheduled through the late , focusing on enhancements, replacements, and of advanced technologies to address growing demands. These initiatives build on recent widenings, such as those completed on Highways 400 and 404 in early 2025, to improve connectivity in high-growth areas. For Highway 400, the Dunlop Street bridge replacement in Barrie began in July 2025 as a key step toward future expansion to 10 lanes, with the four-year, $120 million project including a new taller concrete barrier and northbound on-ramp modifications to support increased capacity north of the Greater Toronto Area. While widening to six lanes from Barrie toward Sudbury was targeted for completion by 2025, ongoing work under the 2025-2028 Southern Highways Program continues to address northern segments for safer, multi-lane travel. Highway 401 has no major route extensions planned, but smart corridor upgrades incorporating sensors and autonomous vehicle technologies are progressing through 2030, alongside maintenance on eastern segments such as the replacement of the Choate Road overpass near Port Hope to accommodate future widening. These enhancements aim to optimize and without altering the highway's overall footprint. The northward extension of Highway 404 to Mount Albert remains deferred, with no construction timeline confirmed as of 2025, though recent widening to add high-occupancy vehicle lanes—completed in January 2025 over 11 kilometers from Highway 407 to Stouffville Road—has improved capacity in the interim. Highway 407's eastern extension to became fully operational and toll-free on June 1, 2025, spanning approximately 40 kilometers from Brock Road in Pickering to Highway 35/115 and integrating seamlessly with the existing tolled ETR section to the west. Highway 69 is targeted for twinning to four lanes from to the French River by 2027 under the 2024-2027 Northern Highways Program, including bridge rehabilitations and minor encroachments into provincial parks to meet 400-series standards for safer north-south travel. These projects are supported by a provincial allocation of approximately $10 billion for 400-series highway expansions and rehabilitations from 2021 to 2025, part of a broader $30 billion commitment over 10 years announced in the 2025 Budget.

New highway projects

represents the most significant new 400-series highway initiative in , comprising a 52-kilometre controlled-access corridor designed to alleviate congestion in the by linking the northern and western suburbs. The route will extend from Highway 400 between King Road and Kirby Road in , through , , and Regions, to the Highway 401/407 ETR interchange near , , and . This includes provisions for a parallel transitway to support public transportation alongside vehicular traffic. In August 2025, the government awarded the initial two contracts to advance site preparation and preliminary works in Halton and Peel Regions. The highway is anticipated to feature four to six lanes, service centres, carpool lots, truck inspection stations, and electric vehicle charging facilities to enhance and efficiency. Projections indicate that, upon opening, the corridor could accommodate over 300,000 vehicle trips daily by 2031, providing a vital alternative to the overburdened Highway 401. The development is expected to deliver substantial time savings, reducing travel times by up to 30 minutes per trip for full-length users compared to current routes via Highways 401 and 400, particularly during peak hours. Economically, the construction phase alone is forecasted to sustain more than 6,000 jobs annually and inject over $1 billion into Ontario's each year. These benefits align with the province's broader strategy to combat amid rapid in the region. Environmental concerns, including impacts on farmland, waterways, and Greenbelt lands, prompted significant opposition and involvement in assessments. However, progress accelerated following a March 2024 agreement between the and governments, which substituted a full with enhanced provincial environmental protections and monitoring commitments. This resolution enabled the project's advancement under the Highway 413 Act, incorporating ongoing consultations and refinements to mitigate ecological effects. The is another key new 400-series project, consisting of a 16.2-kilometre four-lane connecting Highway 400 near to Highway 404 near Mount Albert, aimed at reducing congestion and improving east-west connectivity in . As of November 2025, the project is under construction, with detail design studies underway, requests for proposals issued for central and eastern sections, tree clearing completed, and a 30-day public review of the Environmental Study Report commencing November 18, 2025. Upon completion, it is expected to save drivers up to 35 minutes in travel time and support economic growth in the region, following federal environmental assessments and provincial commitments to mitigate impacts on local ecosystems. As of late 2025, Highways 413 and the remain the only confirmed new 400-series routes under active , forming a cornerstone of Ontario's $28 billion highways program aimed at expanding capacity across the province. While preliminary studies for additional corridors, such as potential links beyond existing networks, continue, no other 400-series projects have secured or broken ground.