Ammonium nitrite
Ammonium nitrite is an inorganic compound with the chemical formula NH₄NO₂, composed of ammonium cations (NH₄⁺) and nitrite anions (NO₂⁻), appearing as colorless to pale yellow crystals that are odorless and have a density of 1.69 g/cm³.[1][2] It is highly unstable and decomposes exothermically into nitrogen gas and water according to the reaction NH₄NO₂ → N₂ + 2H₂O, even at room temperature, with decomposition accelerating above 60°C and potentially becoming explosive.[2][3] Due to its instability, ammonium nitrite is rarely isolated in pure form and is typically prepared in situ for specific applications, such as by absorbing a mixture of nitric oxide (NO) and nitrogen dioxide (NO₂) in aqueous ammonia or by reacting ammonium chloride with sodium nitrite.[2][4] Its primary laboratory use is as a source of pure nitrogen gas through controlled thermal decomposition, while industrial applications include its role as a microbiocide, rodenticide, and agricultural pesticide, though handling requires caution owing to its reactivity.[1][5] Ammonium nitrite is acutely toxic to humans and aquatic life, primarily due to the nitrite ion's ability to induce methemoglobinemia by oxidizing hemoglobin, and it can release toxic fumes of ammonia and nitrogen oxides upon heating.[1][5] Soluble in water but insoluble in ethanol and ether, it finds limited additional uses in chemical synthesis, such as blowing agents for plastics and rubber, but its hazards generally restrict widespread adoption.[6][7]Synthesis
Laboratory preparation
Ammonium nitrite can be prepared in the laboratory through a double displacement reaction between silver nitrite and ammonium chloride, which precipitates silver chloride as a byproduct. The reaction proceeds as follows: \mathrm{AgNO_2 + NH_4Cl \rightarrow NH_4NO_2 + AgCl} This method, historically developed by Prafulla Chandra Ray, involves dissolving the reactants in aqueous solution at room temperature, followed by filtration to remove the insoluble silver chloride precipitate; the filtrate is then concentrated under reduced pressure below 30°C to isolate the product.[8] A common in situ preparation involves the reaction of sodium nitrite with ammonium chloride in aqueous solution: \mathrm{NaNO_2 + NH_4Cl \rightarrow NH_4NO_2 + NaCl} The mixture is often slightly acidified to promote formation, and the ammonium nitrite is used directly without isolation due to its instability.[4] Another approach involves the reaction of nitrous acid with ammonium hydroxide. Nitrous acid is first generated in situ by adding hydrochloric acid to sodium nitrite: \mathrm{NaNO_2} + \mathrm{HCl} \rightarrow \mathrm{HNO_2} + \mathrm{NaCl} The resulting nitrous acid then reacts with ammonium hydroxide: \mathrm{HNO_2} + \mathrm{NH_4OH} \rightarrow \mathrm{NH_4NO_2} + \mathrm{H_2O} The mixture is maintained at low temperature (around 0–5°C) to prevent decomposition, and the ammonium nitrite solution is used directly or evaporated carefully.[5] Ammonium nitrite can also be synthesized by absorbing a gas mixture of equal parts nitric oxide (NO) and nitrogen dioxide (NO₂) into an aqueous ammonia solution, with the pH controlled above 7 to favor formation of the nitrite salt. The gases are bubbled through the ammoniacal solution at ambient temperature, leading to the overall reaction: \mathrm{NO} + \mathrm{NO_2} + 2 \mathrm{NH_3} + \mathrm{H_2O} \rightarrow 2 \mathrm{NH_4NO_2} This method requires careful preparation of the NO/NO₂ mixture, often from controlled oxidation of nitric oxide, and the product is obtained as a solution after absorption.[9] Oxidation of ammonia using hydrogen peroxide provides an alternative route to form ammonium nitrite. Hydrogen peroxide can oxidize ammonia solutions under controlled conditions, often with catalysts such as sodium hydroxide or metals, to produce the nitrite; yields depend on the oxidant concentration, typically achieving moderate efficiency in small-scale setups.[10] Precipitation via metathesis reactions, such as between barium nitrite and ammonium sulfate, is another effective laboratory technique. The reaction is: \mathrm{Ba(NO_2)_2} + (\mathrm{NH_4)_2\mathrm{SO_4} \rightarrow 2 \mathrm{NH_4NO_2} + \mathrm{BaSO_4} Aqueous solutions of the reactants are mixed at room temperature, resulting in the immediate precipitation of insoluble barium sulfate, which is removed by filtration; the filtrate is then evaporated below 30°C to obtain ammonium nitrite. A similar process uses lead nitrite instead of barium nitrite, with lead sulfate as the byproduct, followed by the same separation steps.[2] Due to its instability, laboratory-prepared ammonium nitrite is typically used immediately or stabilized with excess ammonia to prevent spontaneous decomposition.Natural occurrence
Ammonium nitrite occurs naturally in trace amounts through environmental processes involving the oxidation of ammonia to nitrite, followed by association with ammonium ions in aqueous media. In the atmosphere, ammonia emitted from natural sources such as soil and vegetation can undergo oxidation by atmospheric oxidants like ozone, forming nitrite intermediates that may combine with ammonium to yield ammonium nitrite, particularly within cloud droplets or aerosol particles. In rainwater, nitrite is present at concentrations ranging from 0.012 to 0.181 μg/mL, typically comprising about 1% of total nitrate levels, while ammonium ions are also detected, enabling the formation of ammonium nitrite in solution.[11] Similarly, in soils, nitrification bacteria such as Nitrosomonas oxidize ammonia to nitrite as part of the nitrogen cycle, resulting in transient coexistence of ammonium and nitrite ions that form ammonium nitrite under suitable conditions.[12] Ammonium nitrite exists in equilibrium with its dissociated ions—ammonium (NH₄⁺) and nitrite (NO₂⁻)—in aqueous solutions, particularly stable at pH values greater than 7, which aligns with alkaline natural waters such as certain lakes or coastal environments. This equilibrium underscores its role as an intermediate in the broader nitrogen cycle, though it rarely accumulates due to further oxidation to nitrate.[13]Properties
Physical properties
Ammonium nitrite is typically observed as colorless or pale yellow orthorhombic crystals at room temperature. It is odorless and possesses a density of 1.69 g/cm³.[5] The compound has a molar mass of 64.04 g/mol.[5] Ammonium nitrite exhibits high solubility in water, with 64.3 g dissolving in 100 g of water at 19.15 °C. Aqueous solutions of the compound are basic, maintaining a pH greater than 7.[4] Due to its thermal instability, ammonium nitrite decomposes between 60–70 °C without undergoing a distinct melting phase.[5] This instability necessitates careful handling, particularly in solution form where temperature and pH control are essential to prevent unintended decomposition.[2]Chemical properties
Ammonium nitrite is an ionic compound composed of the ammonium cation, [ \ce{NH4+} ], and the nitrite anion, [ \ce{NO2-} ].[1] Under gentle heating, typically around 60–70 °C, ammonium nitrite undergoes thermal decomposition to yield nitrogen gas and water vapor according to the following exothermic reaction: \ce{NH4NO2 -> N2 + 2H2O} This process occurs without residue and is often utilized for the controlled generation of pure nitrogen gas in laboratory settings.[14] Ammonium nitrite exhibits stability in alkaline media, particularly when excess ammonia is present to maintain a pH above 7; a mole ratio of NH₄NO₂ to NH₃ greater than 10% helps prevent spontaneous decomposition. In contrast, it readily decomposes in acidic conditions due to the instability of the nitrite ion in low pH environments.[15][16] Under standard conditions, ammonium nitrite is non-flammable, though it can act as an oxidizer and support combustion of other materials if contaminated.[17]Applications
Laboratory uses
Ammonium nitrite is commonly employed in laboratory settings to generate pure dinitrogen (N₂) gas through its thermal decomposition, which proceeds cleanly to N₂ and water vapor without leaving solid residues. Due to the compound's instability, it is typically prepared in situ by mixing aqueous solutions of ammonium chloride (NH₄Cl) and sodium nitrite (NaNO₂) in a 1:1 molar ratio, followed by gentle heating of the resulting solution in a round-bottom flask fitted with a delivery tube to collect the gas over water or in a gas syringe for volume measurements. This method is particularly useful for creating inert atmospheres in reactions sensitive to oxygen or for calibrating gas volumes in experimental setups, as the decomposition yields high-purity N₂ suitable for precise volumetric analysis.[18][19] The decomposition reaction of ammonium nitrite, NH₄NO₂ → N₂ + 2H₂O, serves as a model system for kinetics studies of nitrogen-containing compound reactions owing to its first-order kinetics and well-defined products. Researchers investigate factors such as pH, temperature, and ionic strength to elucidate the mechanism, which involves the interaction of ammonium (NH₄⁺) and nitrite (NO₂⁻) ions forming an intermediate nitrosamine that rapidly dissociates. These studies provide insights into reaction rates in aqueous media, with activation energies typically around 100-110 kJ/mol, aiding in understanding similar processes in environmental and biochemical contexts.[20] Historically, ammonium nitrite played a key role in Lord Rayleigh's late 19th-century experiments on gas densities, where its decomposition provided a source of "chemical nitrogen" for comparison against atmospheric nitrogen. Rayleigh measured the density of N₂ from ammonium nitrite purified by red heat as 2.2987 g/L at standard conditions, contrasting it with the higher density of 2.3001 g/L for atmospheric samples, which ultimately led to the discovery of argon as an impurity in air. This application underscored the compound's utility in high-precision gas analysis for determining atomic weights and isotopic compositions.[21] In analytical chemistry, ammonium nitrite is used in the preparation of ammonium cobaltinitrite, [(NH₄)₃[Co(NO₂)₆]], a reagent for the qualitative detection of potassium ions through precipitation. The nitrite ions from ammonium nitrite facilitate the coordination in synthesizing the complex, which then reacts with K⁺ as follows:$3\mathrm{K}^{+} + [\mathrm{Co(NO_2)_6}]^{3-} \rightarrow \mathrm{K_3[Co(NO_2)_6]}
This yellow precipitate forms rapidly in acidic media, enabling sensitive spot tests or gravimetric assays for potassium in samples like soils or biological fluids.[22]