Fact-checked by Grok 2 weeks ago

CSS Albemarle

CSS Albemarle was a steam-powered casemate ironclad ram constructed for the Confederate States Navy during the American Civil War.^[1] Built in secrecy on the Roanoke River at Edwards Ferry, North Carolina, between 1863 and 1864 under the direction of Commander James W. Cooke, the vessel measured 158 feet in length, had a beam of 35 feet 3 inches, and drew 9 feet of water when loaded.^[1]^[2] Her casemate was protected by 4-inch iron armor plating sloped at 30 degrees, and she was armed with two 6.4-inch Brooke rifled cannons mounted in a single pivot.^[3] Albemarle achieved her greatest success in the Battle of Plymouth on April 17–19, 1864, when she rammed and sank the USS Southfield, damaged the USS Miami, and drove off the Union flotilla, enabling Confederate forces to recapture the strategic town of Plymouth and secure control of the Roanoke River and Albemarle Sound.^[3]^[2] On May 5, 1864, she engaged and repelled seven Union warships in the Battle of Batchelor's Bay, demonstrating her effectiveness despite her limited armament and shallow-draft design suited to coastal operations.^[4]^[5] Her operational career concluded on the night of October 27–28, 1864, when she was attacked and sunk in the Roanoke River at Plymouth by a steam launch carrying a spar torpedo, commanded by Union Lieutenant William B. Cushing, which exploded beneath her hull and created a fatal breach.^[3]^[6] The destruction of Albemarle removed the primary Confederate obstacle in the sounds, allowing Union forces to retake Plymouth shortly thereafter.^[2]

Design and Construction

Technical Specifications

The CSS Albemarle measured 158 feet (48 m) in length overall, with a beam of 35 feet 3 inches (10.7 m) and a loaded draft of 9 feet (2.7 m), dimensions that facilitated operations in shallow inland waterways such as the Roanoke River while limiting seaworthiness.^[7]^[8] Her hull depth was approximately 8 feet 2 inches (2.5 m), contributing to a low profile suited for riverine defense.^[9] Propulsion was provided by two horizontal, non-condensing steam engines with link motion, each driving a three-bladed screw propeller via geared transmission, yielding a maximum speed of around 6 knots under favorable conditions despite the engines' reputation for unreliability.^[8]^[7] The engines, constructed on-site by the builder Gilbert Elliott, produced approximately 200 horsepower total, enabling sustained but modest maneuverability in confined waters.^[10] The armored casemate, extending 60 feet along the central hull, featured two layers of 2-inch-thick iron plates bolted over 22 to 24 inches of oak and pine wooden backing, with the structure sloped at approximately 30 to 35 degrees to enhance projectile deflection.^[11]^[7] This configuration provided effective protection against contemporary naval gunfire but imposed weight penalties that restricted speed and agility.^[12] The ship's complement typically consisted of 150 officers and enlisted men, adequate for operating the vessel, manning its guns, and conducting extended patrols with onboard provisions for self-sufficiency in remote riverine environments.^[7]^[9]

Category	Details
Displacement	Approximately 376 tons
Hull Material	Yellow pine framing with iron plating
Deck Armor	1-inch iron over timber

Building Process and Innovations

The CSS Albemarle was designed by John L. Porter, the chief constructor of the Confederate States Navy, who drew on prior experience with ironclad conversions such as the CSS Virginia.^[13]^[14] Construction was overseen by Gilbert Elliott, a 19-year-old civilian engineer lacking formal shipbuilding training, who contracted with the Confederate Navy in 1863 to build the vessel on the south bank of the Roanoke River.^[15]^[16] Work began in January 1863 in a makeshift yard on a fallow cornfield at Edwards Ferry in Halifax County, North Carolina, selected for its inland position to evade Union naval blockades that restricted access to coastal shipyards.^[17]^[14]^[18] This land-based approach represented a pragmatic innovation under wartime constraints, allowing decentralized fabrication far from Union-controlled waters and relying on overland transport for components.^[19]^[20] Armor plating utilized scavenged railroad rails from North Carolina lines, melted and rerolled into iron bars due to shortages of purpose-built naval armor.^[21]^[22] The hull employed traditional wooden framing and planking, caulked with available local materials, enabling assembly without specialized maritime infrastructure.^[23] Construction faced significant hurdles, including chronic shortages of skilled labor, timber, and iron, exacerbated by disrupted rail deliveries and the Confederacy's broader industrial limitations.^[24]^[25] An initial incomplete launch in October 1863 damaged the keel, necessitating repairs, while fitting-out with engines and final armor continued amid manual labor dependencies.^[17] The vessel reached operational readiness by April 1864 without access to a drydock, relying instead on riverine flotation for completion.^[17]^[26] These methods underscored adaptive engineering, yielding a functional ironclad in approximately 15 months despite resource scarcity.^[18]

Armament and Armor

Guns and Ordnance

The CSS Albemarle mounted two 6.4-inch (160 mm) Brooke rifled muzzle-loading cannons as its primary offensive armament, positioned in a single casemate along the centerline, one forward and one aft.^[27]^[7] These double-banded guns, manufactured at the Tredegar Iron Works in Richmond, Virginia, in 1863, each weighed approximately 9,100 pounds and measured 142 inches in length.^[28]^[29] Designed by Confederate Navy officer John M. Brooke for enhanced accuracy and penetration compared to smoothbore artillery, they fired shells or solid shot weighing up to 100 pounds, enabling the ironclad to inflict severe damage on the wooden hulls of Union vessels at engagements typical of riverine warfare.^[30]^[29] The cannons were installed on pivot mounts that permitted broadside firing as well as end-on ramming support, with each gun offering a 180-degree arc of fire limited by the casemate's armored ports and structure.^[27] This configuration emphasized firepower concentration over broad traverse, relying on the vessel's maneuverability to align targets. While no dedicated auxiliary guns are documented, the Brooke rifles formed the core of Albemarle's offensive capability, with crew small arms serving incidental roles in close-quarters defense rather than structured armament.^[7] High-velocity rifled projectiles contributed to barrel wear over prolonged use, though specific maintenance records for Albemarle's guns highlight the challenges of Confederate ordnance production amid resource shortages.^[28]

Projectiles and Defensive Features

The 6.4-inch Brooke rifles mounted on CSS Albemarle fired solid shot and explosive shells, with projectiles weighing approximately 100 pounds each, designed for both penetration and fragmentation effects against wooden-hulled Union vessels.^[31]^[32] These munitions were supplemented by limited incendiary bolts and canister loads when available, though Confederate ordnance production constraints—stemming from resource shortages and reliance on converted pre-war smoothbores—restricted overall ammunition stockpiles to essentials for short engagements.^[33]^[34] The vessel's primary defensive features included a casemate armored with two layers of 2-inch iron plating over oak timbers, sloped at an angle that causally enhanced resilience by deflecting incoming projectiles rather than absorbing direct impacts, thereby repelling multiple Union broadsides without critical hull breaches.^[26]^[7] This configuration proved effective against standard naval artillery of the era, as the oblique incidence reduced normal force on the plates, minimizing penetration risk per basic ballistic principles. However, vulnerabilities persisted in the exposed pilothouse and smokestack, which lacked equivalent sloping and sustained damage from direct hits, compromising command visibility and exhaust flow.^[35] An integrated ram prow, featuring an 18-foot oak extension sheathed in 2-inch iron plating and tapered to an ax-head edge, served as a close-range offensive-defensive element, enabling structural disruption of enemy hulls while the ironclad's low profile minimized its own exposure.^[36] Key limitations included susceptibility to underwater attack vectors, where the flat-bottomed hull offered no armored protection against spar torpedoes or mines, and inadequate internal ventilation, which trapped heat and smoke to induce crew fatigue during sustained operations absent open-sea airflow.^[37]^[38]

Operational History

Commissioning and Battle of Plymouth

The CSS Albemarle was commissioned on 17 April 1864, with Commander James W. Cooke assuming command, and promptly departed its construction site at Edwards Mills to steam down the Roanoke River in support of Confederate land operations against Plymouth, North Carolina.^[1]^[18] Confederate forces under Major General Robert F. Hoke had initiated the land assault on Plymouth on 17 April, but Union naval forces, including the wooden gunboats USS Miami and USS Southfield, maintained control of the Roanoke River, preventing full encirclement of the Federal garrison.^[1] On 19 April, the Albemarle engaged the Union squadron; it rammed the USS Southfield—lashed to the Miami for mutual support—breaching the gunboat's hull and causing it to sink rapidly, while 100-pound rifled projectiles from the ironclad's broadside damaged the Miami and compelled the remaining Union vessels to retreat downstream.^[11]^[3] Subjected to over 500 shells from Union gunfire during the engagement, the Albemarle incurred negligible structural damage due to its sloped iron-armored casemate, which proved impervious to the wooden ships' armament and highlighted the tactical advantages of Confederate ironclad construction against conventional naval forces.^[11] The ironclad's intervention neutralized the Union blockade, allowing Hoke's troops to overrun the defenses and capture Plymouth on 20 April, thereby restoring Confederate dominance over the Roanoke River and facilitating supply lines into the eastern North Carolina sounds.^[1] This victory temporarily bolstered Southern control in the region amid broader Union advances.^[39]

Roanoke River Operations

Following the Battle of Plymouth in April 1864, CSS Albemarle patrolled the Roanoke River, defending Confederate positions at Plymouth and upstream at Hamilton against Union attempts to regain control of the waterway.^[26] Its operations focused on escorting Confederate vessels and repelling blockading Union gunboats seeking to advance upriver or interdict supply lines.^[3] These patrols maintained Southern dominance in the region through the summer, despite the ironclad's limited mobility owing to a top speed of about 4 to 6 knots under power from its twin 200-horsepower steam engines.^[7]^[14] A significant engagement occurred on May 5, 1864, when Albemarle, accompanied by the captured steamer CSS Bombshell, sortied down the Roanoke to challenge a Union squadron of seven warships blockading the river mouth in Albemarle Sound.^[40] The Union force included USS Sassacus, USS Wyalusing, and others; Sassacus attempted to ram Albemarle at speed, but the Confederate ironclad's sloped armor plating deflected the blow, inflicting only superficial damage.^[39] In response, Albemarle's 8-inch Brooke rifle fired a shot that penetrated Sassacus's boiler, scalding crew members, disabling the engine, and forcing the Union ship to withdraw under tow.^[41] The battle ended indecisively, with Albemarle and Bombshell (the latter recaptured by Union forces) returning upriver, but it demonstrated the ironclad's resilience against superior numbers.^[40] Albemarle's persistent presence on the Roanoke constrained Union naval operations, preventing effective resupply or reinforcement of Federal positions and contributing to sustained Confederate resistance around Plymouth into late 1864.^[42] Coordination with shore-based Confederate artillery and army units further protected riverine supply routes, though the ironclad's low speed hampered pursuits of retreating Union vessels.^[39] This defensive posture held despite broader Union advantages in the theater, delaying Federal recapture of the area until after Albemarle's removal from service.^[11]

Sinking by Union Torpedo Raid

On the night of October 27, 1864, Union Navy Lieutenant William B. Cushing commanded a small steam launch armed with a spar torpedo to attack the CSS Albemarle while it was moored at the docks in Plymouth, North Carolina.^[43] Approaching under darkness, Cushing's boat navigated past Confederate pickets and a log boom intended to protect the ironclad, positioning the 14-foot spar to detonate approximately 200 pounds of powder directly against the hull just below the waterline.^[43] The explosion created a large hole—described by Cushing as sufficient to "drive a wagon through"—causing the Albemarle to flood rapidly in the shallow six-foot depth alongside the dock.^[43]^[44] Confederate Lieutenant Alexander F. Warley, commanding the Albemarle, reported that the assailant's boat struck obliquely under the port bow, overriding the protective boom before the torpedo detonated, smashing the hull and allowing water to ingress faster than pumps could manage.^[44] The crew fired small arms at the retreating launch and attempted to counter the flooding, but efforts proved futile, forcing abandonment with only the casemate shield and smokestack remaining above water; no fatalities occurred among the Albemarle's personnel.^[44] The ironclad's mooring near shore stemmed from ongoing repairs following prior battle damage, exposing it to such close-range vulnerabilities despite sentries and booms.^[45] Cushing's launch was disabled by return fire and the explosion's concussion, prompting him and survivors to swim downstream roughly three miles to Union lines, evading capture through swamplands and highlighting the raid's high personal risks.^[43] The Albemarle's destruction neutralized a key Confederate asset blockading the Roanoke River, facilitating Union ground forces' recapture of Plymouth on October 31, 1864.^[43] Warley's account emphasized the suddenness of the attack amid routine night watches, underscoring tactical surprise over any lapses in honorable defense.^[44]

Post-War Fate

Recovery Efforts

Following the torpedo strike on October 27, 1864, which tore a six-foot hole in the hull just below the waterline, the CSS Albemarle filled rapidly and settled stern-first into the shallow mud of the Roanoke River near Plymouth, North Carolina, with only her smokestacks and upper casemate protruding above the surface.^[44] Confederate personnel made initial attempts to pump out the ingress but failed, as the breach overwhelmed dewatering efforts amid the ship's low freeboard and the river's limited depth of about nine feet at the site.^[6] These operations reflected wartime logistical constraints, prioritizing evacuation over extended salvage as Union forces advanced. With Plymouth's Confederate garrison surrendering on October 31, 1864—just four days after the sinking—the wreck fell under Union control intact, though partially submerged and guarded against further sabotage.^[45] Union naval engineers assessed the vessel's potential recovery, leveraging the Roanoke's shallow bed and muddy bottom, which had cushioned the descent and prevented total breakup but allowed sediment infiltration that corroded machinery and weakened iron plating during months of immersion.^[17] Salvage commenced in early 1865, involving divers to clear debris from the torpedo breach and secure the hull, alongside pumping and buoyancy aids to achieve partial refloatation by February.^[6] These efforts, resource-heavy amid ongoing hostilities, exploited the ship's robust construction but highlighted challenges from compromised boilers, engines fouled by river silt, and armor seams strained by uneven settling. The hulk was then towed northward by USS Ceres, arriving at Norfolk Navy Yard on April 27, 1865—days after the war's Confederate surrender.^[46]^[47] Inspection there deemed full restoration impractical, citing irreparable torpedo-induced structural failure, waterlogged internals, and the tactical obsolescence of riveted casemate designs relative to emerging monitors and faster steamers.^[48]

Scrapping and Material Reuse

Following its salvage in early 1865 after the Union capture of Plymouth, North Carolina, the CSS Albemarle was towed northward by the USS Ceres, arriving at the Norfolk Navy Yard on April 27, 1865.^[1] At the yard, the vessel was condemned as a prize of war and formally purchased by the U.S. Navy, with initial plans to patch its torpedo-damaged hull for potential future use.^[3] By the time it reached drydock, however, the American Civil War had concluded, rendering restoration uneconomical due to extensive wear from combat, the torpedo breach, and the absence of ongoing naval needs against Confederate forces.^[3] The Albemarle was thus placed in ordinary without entering active service under the U.S. flag and remained laid up at Norfolk.^[1] In October 1867, the Navy sold the ironclad at public auction for scrap, prioritizing material recovery over symbolic retention amid postwar demobilization and fiscal constraints.^[24] The buyer, J. N. Leonard and Company, likely dismantled the hull, casemate armor, and other components, though no records detail specific repurposing of elements like engines or boilers in other vessels.^[1] This disposal underscored the Union's utilitarian approach to captured Confederate assets, converting the Albemarle's iron and machinery into recoverable value rather than investing in repairs for a vessel deemed obsolete by war's end.^[3]

Legacy and Assessment

Military Achievements and Criticisms

The CSS Albemarle exemplified the tactical superiority of ironclad rams over wooden-hulled gunboats in confined waterways, as demonstrated by its ramming and sinking of the USS Southfield on April 17, 1864, which facilitated Confederate recapture of Plymouth and dispersal of a Union flotilla despite numerical disadvantage.^[37]^[7] In subsequent engagements, such as the May 1864 clash in Albemarle Sound, it repelled attacks from vessels including the USS Sassacus and USS Miami, inflicting damage while sustaining minimal structural harm, thereby underscoring the protective efficacy of its 7-inch sloped iron casemate armor against conventional naval gunfire.^[37]^[7] These successes stemmed from causal advantages in armor penetration resistance and ramming capability, allowing a single vessel to neutralize multiple opponents and support ground operations under Brig. Gen. Robert F. Hoke.^[7] Confederate engineering ingenuity in constructing the Albemarle—initiated in a cornfield amid industrial shortages—enabled localized dominance in North Carolina's sounds and rivers, where it defended Confederate positions through summer 1864 and delayed Union advances by denying free navigation of the Roanoke River.^[18] Strategically, it temporarily offset Union numerical superiority in the theater, functioning as a "fleet in being" that tied down enemy resources without requiring broader fleet integration.^[49] Confederate naval records praise its resilience in sustaining operations despite supply constraints, positioning it as one of the South's most effective armored warships.^[37] Notwithstanding these accomplishments, the Albemarle's design prioritized shallow-draft riverine utility over versatility, capping its speed at roughly 5 knots and hindering evasion or pursuit in less restricted waters.^[7] This immobility, combined with reliance on a prominent smokestack vulnerable to shellfire, necessitated frequent repairs for engine malfunctions, steering gear damage, and plating breaches post-engagement.^[7] Its low freeboard and fixed casemate further exposed it to unconventional threats like spar torpedoes, culminating in sabotage by Union Lt. William B. Cushing on October 27, 1864, which exploited these fixed defensive features.^[37] Union assessments critiqued Confederate overdependence on such isolated assets, arguing that while armor innovations justified localized costs, the Albemarle could not project power beyond its operational radius or counter overarching Union blockades and amphibious campaigns.^[37] Ultimately, its theater-specific successes failed to alter the war's trajectory, revealing inherent limitations in scalability and adaptability for a resource-starved navy.^[37]

Replica and Historical Commemoration

A 3/8-scale replica of the CSS Albemarle, approximately 63 feet long, was constructed and placed at anchor adjacent to the Port O' Plymouth Museum in Plymouth, North Carolina, in April 2002.^[50] This functional model replicates key structural elements of the original ironclad, including its casemate design and propulsion features, utilizing materials and techniques informed by historical records to facilitate public education on Confederate naval engineering during the Civil War.^[50] The exhibit remains a central attraction, allowing visitors to board and examine the vessel's layout, which underscores the innovative yet resource-constrained shipbuilding efforts in the Confederacy.^[51] Historical commemoration of the Albemarle extends through museum programming at the Port O' Plymouth facility, which integrates the replica into broader exhibits on the Battle of Plymouth and Roanoke River campaigns, emphasizing verifiable operational details over interpretive narratives.^[50] Artifacts associated with the ironclad, such as recovered armaments and fittings documented in period reports, contribute to preservation efforts, though primary physical relics are limited due to post-sinking salvage and reuse by Union forces.^[18] Ongoing interest in the vessel's legacy includes scholarly examinations of its tactical impact, with no significant archaeological work at a dedicated wreck site following its 19th-century recovery and repurposing.^[43] These efforts prioritize empirical reconstruction to illuminate 1860s maritime warfare mechanics, supporting accurate historical understanding without unsubstantiated embellishments.

References

[1]
Albemarle - Naval History and Heritage Command
Apr 1, 2014 · CSS Albemarle was built in the Roanoke River at Edwards Ferry, N.C., in 1863-64 under supervision of Comdr. J. W. Cooke, CSN, who became her ...
[2]
The Ironclad Albemarle and the Battle of Plymouth - NC DNCR
Oct 27, 2016 · On October 27, 1864, the Confederate ram CSS Albemarle was sunk. The Albemarle was commissioned and launched in April 1864, departing directly for Union- ...
[3]
[PDF] CSS Albemarle - Navy.mil
CSS Albemarle was a steam-powered ironclad of the Confederate Navy. With her two 6.4-inch Brooke rifled cannons and thick iron armor, she became the biggest ...
[4]
The CSS Albemarle and the Battle of Batchelor's Bay - NC DNCR
May 5, 2016 · On May 5, 1864, the CSS Albemarle crossed Batchelor's Bay and fought seven Union warships. Upon entering the Albemarle Sound the Confederate ram, under command ...
[5]
Naval Battle, 1864 (A-57) - NC DNCR
Dec 4, 2023 · The Confederate ironclad ram Albemarle, led by Capt. JW Cooke, crossed Batchelor's Bay, May 5, 1864, and fought seven Union warships.
[6]
Sinking of the "C.S.S. Albemarle" - October 27-28, 1864 - Carolana
It was sunk by a Union torpedo boat and thirteen (13) volunteers led by Lt. William Barker Cushing on the night of October 27-28, 1864 above the town of ...
[7]
CSS Albemarle Ironclad Ram Warship - Military Factory
The Albemarle was completed in approximately 12 months. Her length was 158 feet from bow to stern with a beam measuring 35 feet, 3 inches and a draught of 9 ...
[8]
CSS Albemarle - Confederate Navy ironclad ram 1864
Jan 2, 2022 · --Screw steamer; ironclad; oak and yellow pine, fastened with iron and treenails. Dimensions.--Length, 158'; beam, 35' 3"; draft - loaded, 9'.Missing: construction | Show results with:construction
[9]
Battle of Albemarle Sound - War History
Dec 13, 2024 · It was some 376 tons, 139 feet between perpendiculars (158 feet overall length), with a beam of 35 feet, 3 inches, and hull depth of 8 feet, 2 ...<|separator|>
[10]
CSS Albemarle: Photos, History, Specification
Rated at 200 hp (150 kW). These engines are built by Elliott himself and can reach a top speed of 5 knots under ideal conditions. The new ships are also ...
[11]
Thunder on the Roanoke | Naval History Magazine
Mounting only two guns, the ironclad CSS Albemarle proved at the Battle of Plymouth, North Carolina, that she nevertheless had plenty of fight.
[12]
CSS Albemarle and CSS Neuse differences? | Naval War
Jul 6, 2025 · CSS Albemarle had deck protection, one layer of 2" plates over 12" timber, her knuckle and casemate had 2 x 2" plate over 22" timber. She had 6 ...Sloped Armour | Monitor, Virginia, & Battle at Hampton RoadsAnother Iron clad armor question - At Sea & Along Inland WaterwaysMore results from civilwartalk.com
[13]
Elliott, Gilbert - NCpedia
Plans and specifications had been prepared by John L. Porter, chief constructor of the Confederate Navy, using experience gained in converting the frigate ...
[14]
Confederate Ironclad Albemarle's Designer Was a Teenager
Nov 26, 2019 · John L. Porter, the man responsible for converting USS Merrimac into CSS Virginia in 1861, prepared the vessel's plans and specifications and ...
[15]
The Confederate Ironclad Ram Albemarle - Green-Wood
Oct 8, 2009 · Following the designs of Chief Engineer John L. Porter, Elliott completed his work within a year and his ship was named the C.S.S. Albemarle. In ...
[16]
CSS Albemarle - Next Exit History
In 1863, 19-year-old engineer Gilbert Elliott contracted with the Confederate Navy Department to construct an ironclad gunboat designed by John L. Porter ...Missing: construction | Show results with:construction<|separator|>
[17]
Albemarle, CSS | NCpedia
The Albemarle was a twin propeller ship mounting two 6.4-inch Brooke rifles in an armored casemate. Construction of the new ironclad began in a cornfield at ...Missing: propulsion speed<|separator|>
[18]
Cornfield Ironclad: CSS Albemarle Emerges - The Mariners' Museum
May 28, 2020 · Albemarle had a beam of 35.4 feet and a length of 158 feet. Its shorter length allowed the vessel to work down the Roanoke River to the ...Missing: specifications | Show results with:specifications
[19]
Ironclad of the Roanoke - Texas Christian University
The chapter on the Edwards Ferry Shipyard where the Albemarle was built actually details the building of the ship more than the situation of the shipyard itself ...
[20]
Confederate Shipyards - Civil War Navy
CSS Albemarle, a casemate ironclad ram 'Beast,” was constructed by Gilbert Elliott in a sloping cornfield owned by William Ruffin Smith, Jr. on the south bank ...
[21]
The Invincible Ironclad - Our State Magazine
Dec 4, 2013 · By May 1864, Cushing has set his sights on the ironclad ram C.S.S. Albemarle. He intends to strike far up the Roanoke River and destroy it. ...Missing: specifications | Show results with:specifications<|separator|>
[22]
This day in Halifax History—The Confederate Ram “Albemarle” is ...
Oct 6, 2025 · Abandoned railroad rails were scavenged from all over the state to provide enough iron for the ship's plating. There was difficulty attaching ...Missing: tar caulking
[23]
The CSS Albemarle - Plymouth - Washington County Historical Society
The Albemarle was constructed in a cornfield, far from the industrial facilities of a shipyard. Led by a 19 year chief contractor with no formal education in ...
[24]
CSS Albemarle - Under Both Flags
Despite the difficulties, by early 1864 the ironclad, commissioned as the Albemarle , was ready to be launched.Missing: history | Show results with:history
[25]
css albemarle - The Inglorius Padre Steve's World
Jan 20, 2015 · The first of which are the major technical advances in naval warship design, particularly in the matter of armor protection and steam propulsion ...
[26]
CSS Albemarle | Fort Branch Civil War Site
She was 122 feet long, 45 feet beam and her draft 8 feet. Her planking was 4 inches thick over 8x10 inch frames. The central shield was 60 feet long and ...Missing: dimensions length
[27]
The 6.4-Inch Brooke of CSS Albemarle at Norfolk
Aug 16, 2025 · Albemarle was armed with two 6.4-Inch Brooke Rifles - each on a pivot mounting allowing it to fire on either broadside or ahead (for the forward ...
[28]
WS_FTP\csn\weapons\cannons - Confederate States Navy
Brooke Rifled Cannon Number S-89. This 7 inch piece was originally located ... 6.4 Inch - Double Banded Brooke Rifle - from the CSS Albemarle. Tredegar ...
[29]
Replica 6.4 inch Brooke Rifled Canon - Next Exit History
It was a breech loading gun that fired shells and solid shot that weighed close to 100 lbs. The CSS Albemarle's original gun was produced in 1863 at Richmond's ...
[30]
Replica 6.4 inch Brooke Rifled Cannon Historical Marker
It was a breech loading gun that fired shells and solid shot that weighed close to 100 lbs. The CSS Albemarle's original gun was produced in 1863 at Richmond's ...Missing: armament specifications
[31]
Replica 6.4 inch Brooke Rifled Canon - Next Exit History
It was a breech loading gun that fired shells and solid shot that weighed close to 100 lbs. The CSS Albemarle's original gun was produced in 1863 at Richmond's ...
[32]
Rifled artillery projectile, Brooke design - Relicman
Rifled 32 pounder gun, 6.4in. Caliber of the gun is 6.4in., 7 grooves, projectile diameter should measure 6.3in. approximately, variations will be found.
[33]
7-Inch Triple Banded Brooke Rifle — Santee1821
May 11, 2024 · 7-Inch Triple Banded Brooke Rifle · 8 to 10 pounds with Shell, Shrapnel, grape, or canister · 10 to 12 pounds with wrought iron bolts · 13 to 14 ...
[34]
Weapons
The naval Brookes were available in 6.4" and 7" calibers. They were considered to be among the most accurate of all Civil War era naval artillery. Nearly all ...
[35]
Museum Monday: Smokestack from CSS Albemarle, shot through ...
May 12, 2014 · The Albemarle suffered heavy damage to her smokestack, as described by Catherine Edmondston in a recent blog post.Missing: vulnerabilities pilothouse ventilation<|control11|><|separator|>
[36]
Lt. William B. Cushing, USN, vs. CSS Albemarle
Oct 3, 2016 · The Albemarle was 152 feet long, with a beam of 45 feet and a draft of 8 feet. A sturdy 8-foot-by-10-foot yellow pine dovetailed frame was ...Missing: complement | Show results with:complement
[37]
The Confederate Ironclad Navy | Naval History Magazine
Everyone remembers the CSS Virginia, but she was just one of more than 20 ironclad warships that steamed forth to fight for the Rebel cause.
[38]
[PDF] Modeling Civil War Ironclad Ships - Walter Nelson
After the battle, the damaged pilot house was repaired, a sloping glacis was added to it, and the removable vent and smokestacks were reinstalled. She retained ...
[39]
Battle of Albemarle Sound: CSS Albemarle Remains Defiant
Jun 3, 2020 · The bow Brooke rifle was pivoted to the starboard forward port and fired at Sassacus at point blank range. The muzzle blast scorched the Union ...
[40]
Battle Detail - The Civil War (U.S. National Park Service)
On May 5, CSS Albemarle fought seven blockading Union ships to a draw at the mouth of the Roanoke River. Federals recaptured the converted steamer Bombshell ...
[41]
NH 1500 "U.S.S. Sassacus and C.S.S. Albemarle"
... Albemarle's engagement with Federal gunboats on Albemarle Sound, North Carolina, 5 May 1864. Sassacus was hit in a boiler and disabled during this action.
[42]
The Sinking of the C.S.S. Albemarle - The Civil War Months
Oct 28, 2024 · Lieutenant Cushing used a launch with a torpedo to sink the C.S.S. Albemarle, which was detonated by a spar thrust under the ship. The blast ...
[43]
Destruction of CSS Albemarle - Report of Lieutenant William Barker ...
The rebel ironclad Albemarle is at the bottom of the Roanoke River. On the night of the 27th, having prepared my steam launch, I proceeded up toward Plymouth.Missing: drydock | Show results with:drydock
[44]
Destruction of CSS Albemarle - Report of A. F. WARLEY
The boat running obliquely, struck us under the port bow, running over the boom, exploded a torpedo, and smashed a large hole in us just under the water line.Missing: drydock | Show results with:drydock
[45]
Without Fear: The Loss of CSS Albemarle - The Mariners' Museum
Jun 4, 2020 · USS Southfield wrecked. Courtesy Naval History and Heritage Command. At 10:30 PM, Cushing's launch ran aground on a sandbar. The next day at ...
[46]
CSS Albemarle - CoastalGuide.com
On May 5th, 1864, the Albemarle, accompanied by CSS Bombshell, former United States Army transport, attacked a Union squadron below Plymouth during which ...Missing: patrols summer
[47]
https://www.americancivilwar.com/tcwn/civil_war/Navy_Ships/CSS_Albemarle.html
[48]
CSS Albemarle: Confederate Ironclad in the American Civil War
Aug 25, 2016 · Their solution came in the form of a mammoth ironclad ram named after the Albemarle Sound, where she had been built and where she would ...
[49]
Strategy Afloat: Fleets in Being - Emerging Civil War
Sep 22, 2014 · In the case of Albemarle, the “fleet in being” strategy worked for a time, but ultimately failed. Her sinking removed the major prop of ...Missing: impact | Show results with:impact
[50]
The Port o' Plymouth Museum - Washington County Historical Society
Come learn about this 17,000 troop battle and see our fully operable, 3/8″ scale replica of the CSS Albemarle. Rated by the Charlotte-Observer as one of ...
[51]
Plymouth | Roanoke River Partners
A good landmark to look for is the 62′ Civil War ironclad replica floating near the shore! This is a 3/8 scale working replica of the CSS Albemarle, which ...