Fact-checked by Grok 2 weeks ago

Farmall Cub

The Farmall Cub is a compact row-crop tractor manufactured by International Harvester from 1947 to 1979, designed as the company's smallest model to serve small-scale farmers transitioning from horse-drawn equipment with its affordable price, versatility, and innovative "Cultivision" layout featuring an offset engine and steering wheel for improved visibility during cultivation.^[1]^[2] Introduced in response to post-World War II demand for accessible machinery on limited-acreage operations, the tractor filled a market gap left by larger models and quickly became popular for tasks like plowing, mowing, and light hauling on farms under 50 acres.^[1] Production began at the Louisville, Kentucky plant, with over 245,000 units built across its lifespan, evolving through three main series: the original Farmall Cub (1947–1964), the International Cub (1964–1975), and the updated International Cub (1975–1979, sometimes extending to 1981 in some records).^[1]^[2]^[3] Powered by a 1.0-liter (59.5 cubic inch) International Harvester C-60 inline-four gasoline engine, early models delivered 9.25 belt horsepower and 8 drawbar horsepower, while later variants reached up to 15 horsepower, paired with a 69.25-inch wheelbase and a weight range of 1,477 to 1,877 pounds for maneuverability in tight spaces.^[2]^[3] The tractor featured two-wheel drive, manual steering, an optional IH Fast Hitch system for quick implement attachment, and an independent rear PTO rated at 11 horsepower, supporting a wide array of attachments like cultivators, mowers, and loaders.^[2]^[1] Notable variants included the low-profile Cub Lo-Boy (1955–1975) for orchard and low-clearance work, and color shifts from the iconic Farmall red to International yellow in later models, with serial numbers stamped on the transmission housing to denote production year and model distinctions.^[1]^[3] Its enduring legacy lies in revolutionizing sustainable small farming practices, remaining a favorite among collectors and hobbyists today for restorations and vintage operations due to its reliability and simplicity.^[1]

History and Development

Origins and Design

The Farmall Cub originated as a response to the post-World War II demand for an affordable, compact tractor tailored to small-scale farming operations. International Harvester initiated development to create a machine capable of replacing horses and mules on small farms, typically under 50 acres, enabling efficient tillage, planting, and cultivation tasks previously limited by animal power. This design emphasis on versatility and economy targeted "single mule" farmers, particularly in the southern United States, where larger tractors were impractical for limited acreage.^[4]^[1]^[5] Key engineering decisions focused on compactness and operator efficiency, incorporating the innovative "Culti-Vision" feature, which offset the engine to the left and the operator's seat to the right for unobstructed visibility along row crops and mid-mounted implements like cultivators and mowers. Initially designated the Farmall X in 1943 with a planned two-cylinder engine, the project shifted by 1944 to a four-cylinder C-60 L-head gasoline engine to enhance power delivery and reliability without compromising the tractor's small footprint. Pre-production prototypes underwent field testing in 1945, culminating in a public unveiling that September at a dealer meeting held at the Hinsdale experimental farm, where the tractor was rebranded as the Farmall Cub.^[1]^[6]^[5]^[7] The initial production color scheme adopted the iconic Farmall red body with white accents on wheels and trim for visual distinction and branding consistency. Early demonstrator models, used for promotional displays in 1950, deviated with an all-white finish to draw attention at shows and dealerships. These design choices established the Cub as a practical, user-friendly tool for smallholder farmers, prioritizing visibility and maneuverability over raw power.^[8]^[1]

Production Timeline

Production of the Farmall Cub commenced in 1947 at the Louisville Tractor Plant in Kentucky, marking the introduction of International Harvester's smallest row-crop tractor designed for small farms.^[9] The initial production run saw 10,846 units built that year, with serial numbers starting at 501.^[10] Over the course of its manufacturing history, more than 245,000 Farmall Cubs and their successors were produced until primary assembly ended in 1979, with limited final runs continuing into 1981.^[5] The Farmall Cub phase spanned from 1947 to 1964, culminating at serial number 224,703, during which several mechanical refinements were implemented to enhance reliability and usability.^[2] In 1953, the braking system was updated to a toggle-type design for improved control and durability.^[11] Production transitioned to the International Cub in 1964, continuing until 1975 with serial numbers reaching 248,124; this era introduced the International 82 model from 1975 to 1979 as a refined iteration with minor power and electrical updates.^[2] With the 1964 transition to the International Cub, production adopted Federal Yellow as the primary color, replacing the traditional Farmall Red while offering Red as an optional finish.^[1]^[12] To meet European market demands, export production began in 1955 at the International Harvester plant in Saint-Dizier, France, where the Farmall Cub was assembled until 1957.^[13] This was followed by the Super Cub variant from 1958 to 1964, featuring a Solex carburetor that provided a slight power increase of approximately 1.25 horsepower over the standard model.^[13]

Technical Specifications

Engine and Powertrain

The Farmall Cub was powered by the International Harvester C-60 engine, a 4-cylinder L-head (side-valve) gasoline unit with liquid cooling and an oil-bath air cleaner. This engine featured a displacement of 59.5 cubic inches (0.981 L), achieved through a bore of 2.625 inches and a stroke of 2.75 inches, with a compression ratio of 6.5:1.^[14] It operated on a thermosyphon cooling system and used a manual starter as standard, with electric starting optional (initially 6V, switching to 12V after serial number 224401 in 1964).^[14] Early models produced 8 horsepower at the drawbar and 9.25 horsepower on the belt at 1600 rpm, with Nebraska tractor test results confirming 9.87 drawbar horsepower and 10.39 belt horsepower under load.^[2] Starting in the 1960s, engine modifications including higher rated RPMs (up to 1800) increased output, reaching 15 horsepower in variants like the International Cub and 154 Lo-Boy.^[15] These power levels supported light tillage and belt-driven tasks, with the C-60's design emphasizing reliability over high output for small-acreage operations.^[2] The transmission was a 3-speed sliding gear manual unit with one reverse gear, providing forward speeds of approximately 2.1 mph in first, 3.1 mph in second, and 6.5 mph in third when equipped with standard 8-24 pneumatic tires.^[16] In 1955, an optional 4-speed creeper gear was introduced, adding a low-speed first gear for precise work like cultivation, reducing top speed in that range to under 1 mph while maintaining the original higher gears.^[17] The transmission required 1.75 quarts (1.7 L) of oil and integrated directly with the rear axle for two-wheel drive.^[17] Drivetrain features included a rear power take-off (PTO) system that evolved over production. A transmission-driven PTO was optional from 1949, but a live PTO—allowing operation independent of clutch engagement—was introduced in 1953, operating at engine speed (1600-1800 rpm counterclockwise) with a 15/16-inch, 10-spline shaft rather than the standard 540 rpm, rated at 11 horsepower claimed.^[2]^[15] The system used differential contracting band brakes for stopping, with manual steering throughout production.^[15]

Dimensions and Capacities

The Farmall Cub tractor features a compact chassis designed for maneuverability on small farms, with a standard wheelbase measuring 69.25 inches (176 cm).^[18] Overall length reaches 99.325 inches (252 cm), while width is 48.25 inches (122 cm) at the minimum tread setting.^[18] Height to the steering wheel stands at 62.75 inches (159 cm), increasing to 76.25 inches (194 cm) including the exhaust stack.^[18] Shipping weight for early standard models is approximately 1,477 pounds (670 kg), rising to 1,877 pounds (851 kg) for later versions equipped with additional components like weights.^[18] Ballasted configurations can exceed 2,891 pounds (1,311 kg) for enhanced traction in demanding conditions.^[18] Ground clearance under the front axle measures 20.375 inches (52 cm), providing ample space for row-crop operations, with rear axle clearance at 20.75 inches (53 cm).^[16] The Cub's fuel tank holds 7.5 U.S. gallons (28.4 L), supporting extended fieldwork without frequent refills.^[19] The thermosyphon cooling system accommodates 9.75 quarts (9.2 L), while the crankcase requires 3 quarts (2.8 L) of oil, typically SAE 30 above 80°F (27°C).^[14] Transmission and rear axle capacity is 3.5 pints (1.75 quarts or 1.7 L) of SAE 90 gear oil.^[16] Standard tire options include 4.00-12 fronts for agricultural use and 8-24 or 9.5-24 rears, balancing traction and soil preservation.^[18] Industrial variants offer 8.3-24 or 9.5-24 rears for varied terrain.^[18] The electrical system employs a 6-volt positive-ground setup with a generator for starting and charging, though conversions to 12-volt systems became common in later years and restorations.^[19] For the Lo-Boy variant, the wheelbase shortens to 62 inches (157 cm) to lower the center of gravity, with overall length at 92 inches (234 cm) and width remaining 48.25 inches (122 cm).^[20] Height reduces to 56.25 inches (143 cm) at the steering wheel, and bare weight is 1,620 pounds (735 kg).^[20] Ground clearance drops to 14 inches (36 cm) under both axles, optimizing it for low-profile tasks like mowing.^[20] Tire configurations mirror the standard model, with 4.00-12 fronts and 8.3-24 rears.^[20] Capacities remain consistent across variants.^[16]

Model Variants

Standard Models

The standard models of the Farmall Cub lineup represent the core, high-clearance tractors designed primarily for row-crop farming and general small-acreage tasks, featuring a raised chassis to allow passage between crop rows without damage. These models evolved through three primary phases, each marked by branding changes, minor mechanical refinements, and serial number progressions that reflect production continuity at International Harvester's Louisville, Kentucky facility.^[2] The original Farmall Cub, produced from 1947 to 1964, was characterized by its distinctive red paint and a fundamental 3-speed sliding gear transmission, with serial numbers progressing from 501 to 224703.^[2] A key update arrived in 1948 with the introduction of the Touch-Control hydraulic system, which provided a single-circuit lift capacity of approximately 500 pounds for implement control, enhancing usability for plowing and mowing operations.^[21] Optional electric starting became available starting in 1950, coinciding with a shift to a 12-volt electrical system for more reliable ignition in varied conditions.^[2] In 1964, the model transitioned to the International Cub through a rebranding to yellow and white coloring, continuing production until 1975 with serial numbers reaching 248124.^[2] This phase introduced the optional IH Fast Hitch system, a quick-attach mechanism compatible with Category 0 implements, simplifying connections for rear-mounted tools like cultivators and disks.^[22] Improvements to steering, including refined gear geometry in the Ross-type box, reduced effort and enhanced maneuverability during tight turns in row crops.^[23] The final standard iteration, the new International Cub from 1975 to 1979, incorporated engine updates to the C-60 gasoline powerplant increasing output to approximately 15 horsepower.^[2] Serial numbers for this series extended beyond 250,000, culminating around 253,479, marking the end of the line before licensing to other manufacturers.^[24] Across all standard models, the high-crop configuration—with approximately 16 inches of ground clearance—facilitated navigation through row crops like corn or soybeans, distinguishing these tractors from low-profile variants such as the Lo-Boy adapted for orchards.^[2]

Lo-Boy and Specialty Models

The Farmall Cub Lo-Boy was introduced in 1955 as a low-center-of-gravity variant designed specifically for orchard and vineyard applications, featuring a shortened wheelbase of 62.5 inches compared to the standard model's 69.25 inches to enhance maneuverability under low-hanging crops. This model lowered the seat height and overall profile by approximately 7.5 inches to improve stability on slopes and reduce clearance issues in specialized farming environments. Produced at International Harvester's Louisville, Kentucky facility, the original Cub Lo-Boy utilized the same 9.25-horsepower C-60 gasoline engine as the standard Cub but incorporated a dropped front axle assembly for better traction and balance in uneven terrain. Subsequent iterations of the Lo-Boy series included the model 154, built from 1968 to 1974 with a claimed 14-horsepower PTO output from an updated version of the C-60 engine featuring domed pistons for improved performance. In the 1970s, the lineup expanded with the 185 Lo-Boy (1974–1976), a gasoline-powered model offering 18 engine horsepower, followed by the gas-powered 184 Lo-Boy (1977–1980) which maintained the 18-horsepower rating with modernized styling and controls. Key specialty features of the Lo-Boy variants included a narrow front axle with a minimum tread width of 48.25 inches for navigating tight row spacings in orchards, along with an optional mid-mount power take-off (PTO) for powering belly mowers or other under-tractor implements. These adaptations emphasized the model's role in niche agriculture, providing enhanced rollover resistance and operational versatility until production of the primary Lo-Boy lines concluded in the late 1970s. For export markets, International Harvester produced the French Super Cub from 1958 to 1962 at its Saint-Dizier facility, featuring a more powerful 1.0-liter four-cylinder gasoline engine rated around 12 horsepower and optional enclosed cab configurations for operator protection in variable European climates.^[25] Overall, approximately 69,500 Lo-Boy units were manufactured across all variants from 1955 to 1980, with the design prioritizing stability for sloped terrains and low-clearance crop areas that challenged standard tractors.

Features and Accessories

Implements and Attachments

The Farmall Cub was designed with a hydraulic system known as Touch-Control, introduced as an option in 1948 and standard on subsequent models, enabling easy raising and lowering of mounted implements via a single lever. This two-way hydraulic power lift supported attachments such as 1-bottom plows, cultivators, and mowers, with a lift capacity of approximately 300 pounds at the rockshaft. The system consisted of a gear-type pump driven from the engine's timing gear train, a control valve, rockshaft, oil strainer, safety valve, and pressure regulator, filled with SAE 10W oil at the factory.^[26]^[27]^[28] PTO-driven implements were powered by an optional rear power take-off operating at engine speed (up to 1800 rpm counterclockwise), with gear reduction available for 540 rpm operation on standard implements, suitable for equipment like rotary tillers, balers, and corn pickers, while a mid-PTO option facilitated front-mounted tools such as snow plows. The rear PTO used a 15/16-inch 10-spline shaft rotating counterclockwise, often requiring adapters for standard implements due to its engine-speed base configuration with gear reduction for the 540 rpm mode. This setup integrated with the tractor's powertrain to deliver reliable power for small-scale farming tasks.^[2]^[26] Common attachments included 2-row cultivators like the Cub-447 model with disk weeders, hay rakes, belly mowers, and front-end loaders introduced in the post-1950s era, such as the International 1000 or Wagner 45 models. Weight brackets allowed for ballast addition up to 400 pounds to improve traction and stability during operation. These attachments mounted via the Universal Mounting Frame, which permitted quick changes in about 6.5 minutes for front-end tools.^[26]^[29] By 1960, International Harvester had developed and approved over 50 implements for the Farmall Cub, forming a comprehensive accessory ecosystem tailored to small farms and gardens. This included planters like the Cub-474 4-row forward model and the Cub-435 4-row rear unit, as well as rare PTO-driven accessories such as gasoline-powered generators under the Ready Power line for off-grid electrical needs. The ecosystem emphasized matched quick-change units for versatility in tillage, planting, and mowing operations.^[30]^[31]

Operational Characteristics

The Farmall Cub's maneuverability made it particularly well-suited for small-scale farming and tight spaces, featuring a minimum turning radius of 9.25 feet without brakes applied and 8.25 feet with brakes, allowing efficient navigation in confined plots such as gardens or orchards.^[16] This design emphasized quick turns for tasks like row cropping or mowing, with the tractor's narrow front wheelbase and adjustable tread widths enhancing its agility on uneven terrain. On roads, the standard three-speed transmission provided a top speed of approximately 7.3 miles per hour in third gear under advertised conditions, though actual performance varied slightly with tire size and load.^[32] Fuel efficiency was a key operational advantage for the Cub, with consumption rates around 0.92 gallons per hour at rated drawbar load during standardized testing, enabling extended use on small fuel tanks without frequent refills.^[32] Starting methods evolved over production; early models from 1947 to 1949 relied on hand cranking, requiring operators to engage the crank after setting the choke and ignition, while from 1950 onward, electric starters became standard, simplifying cold starts via a pull-out starter rod.^[33] Maintenance was straightforward due to the tractor's simple belt-driven systems for accessories like the PTO and hydraulics, with annual oil changes recommended using SAE 30 engine oil to maintain lubrication in the four-cylinder engine.^[34] However, operators often encountered carburetor icing in cold, humid weather, where frost buildup on the throttle plate reduced airflow and power, necessitating techniques like warming the intake or using heated air sources to mitigate.^[35] In field performance, the Farmall Cub excelled at light-duty tasks such as tillage, haying, and gardening, delivering effective power for small implements on plots under 10 acres.^[36] Its drawbar pull reached up to 1,605 pounds in first gear during maximum load tests, providing sufficient traction for pulling plows or mowers on level ground without excessive slippage.^[32] This capability, combined with a rated drawbar horsepower of about 9.87 under load, ensured reliable operation for hobby farms and market gardens, though it was less suited for heavy draft work.^[37]

Legacy

Comparable Tractors

The Allis-Chalmers Model G, produced from 1948 to 1955, offered comparable power to the Farmall Cub with approximately 10 horsepower at the PTO, but its rear-engine design emphasized versatility as a hybrid walking tractor or sulky-mounted unit for light cultivation tasks.^[38]^[39] With only about 30,000 units manufactured, it was less common and typically more expensive than the Cub due to its specialized configuration and lower production scale.^[40]^[41] The Massey-Harris Pony 11, built from 1947 to 1957, delivered around 12.9 horsepower and featured a narrower wheelbase of 66 inches, making it suitable for tighter spaces in European-style farming but less stable on uneven terrain compared to the Cub.^[42]^[43] Priced lower at introduction, its hydraulic system was often criticized for limited lifting capacity and durability, particularly under heavy implement loads, restricting its appeal for demanding small-farm operations.^[44] Approximately 29,000 units were produced in Canada, with nearly 90,000 units built in France contributing to a worldwide total of about 119,000.^[43]^[45] In contrast, the Ford 8N from 1947 to 1952 provided significantly more power at 23 horsepower, positioning it as a larger-scale option for general small-farm duties, though it shared market overlap with the Cub in post-war rural economies.^[46] The Cub's offset "Cultivision" seat design offered superior visibility for row-crop work, allowing operators to align directly over plants without obstruction, an advantage the more centered 8N layout lacked.^[1]^[5] The Farmall Cub distinguished itself through its offset seating for enhanced row-crop visibility and long-term parts availability, supported by over 245,000 units produced, far exceeding the volumes of contemporaries like the Model G but comparable to the Pony 11 on a global scale.^[47]^[48] This production longevity and design focus on small-acreage precision helped the Cub maintain a stronger market presence among rivals.^[1]

Collectibility and Modern Use

The Farmall Cub remains highly sought after among collectors due to its compact size, historical significance as International Harvester's smallest production tractor, and versatility for hobby farming. Early models from 1947 to 1950, particularly unrestored examples in the original red paint, command premium prices at auctions and sales, often ranging from $1,500 for project units to $5,700 or more for well-preserved specimens, reflecting steady appreciation in value over time.^[49]^[50] Enthusiast organizations, such as the International Harvester Collectors Club, which publishes Red Power Magazine and was founded in 1990, actively promote the Cub through national conventions, shows, and regional events where owners display and discuss restorations. Enthusiast events like the annual CubFests continue in 2025, including the Rocky Mountain Cubfest, where owners gather for shows and discussions.^[51] Restoration efforts among owners frequently involve modernizing electrical systems with 12-volt conversion kits to improve reliability for intermittent use, alongside rebuilding or upgrading the hydraulic touch-control system for better implement handling. Parts for these modifications, including alternators, wiring harnesses, hydraulic pumps, valves, and seal kits, are widely available from specialized aftermarket suppliers, enabling cost-effective revivals even for tractors stored for decades.^[52]^[53] In contemporary settings, the Farmall Cub finds renewed purpose on small homesteads for tasks like plowing, cultivating, and mowing up to 3 acres, as well as light landscaping and terracing with attachments such as disc harrows, sickle-bar mowers, and planters. Its narrow profile and adaptability to horse-drawn implements make it ideal for organic gardening and crop rotation systems, often outperforming modern sub-compact tractors in maneuverability while costing far less—typically $1,500 to $5,000 for a functional used example versus over $10,000 for new equivalents.^[5] Owners also showcase restored Cubs in local parades and community events, highlighting their enduring appeal as cultural icons of mid-20th-century agriculture. As of 2025, online tutorials and revival projects continue to inspire fixes for common issues like seized engines, sustaining interest among hobbyists. Following the end of production in 1979, International Harvester offered no direct successors to the Cub, leaving a gap in small-scale tractor options that has been partially filled by affordable Chinese-manufactured mini tractors, such as 25- to 50-horsepower models designed for similar garden and light-duty farm applications. While exact figures are elusive, enthusiast communities report hundreds of Cubs undergoing restoration annually, supported by abundant parts availability and a dedicated following that keeps the model viable decades after discontinuation.^[1]^[54]

References

[1]
How The Farmall Cub Charged Tractor History
### Summary of Farmall Cub Tractor History
[2]
TractorData.com Farmall Cub tractor information
Apr 28, 2024 · Manufacturer, Farmall (a part of International Harvester) ; Drawbar (claimed), 10 hp 7.5 kW ; PTO (claimed), 11 hp 8.2 kW ; Belt (claimed), 9.76 hpInternational Harvester Cub · Full dimensions and tires... · Engine details... · Photos
[3]
Farmall Cub Yellow Tractor Specs, Parts, and Serial Numbers (1947-1979)
### Farmall Cub Yellow Tractor Summary
[4]
The One For All Since 1923 Find Your Farmall - CaseIH
1945: CUB: THE SMALLEST FARMALL YET. The smallest of the Farmall tractors, the Cub was designed specifically for small-acreage farming in the years following ...
[5]
Farmall Cub - Maine Organic Farmers and Gardeners Association
The Farmall Cub, introduced in 1947, was a versatile tractor with a 4-cylinder engine, "cultivision", and many implements. It's a great tool for small-acreage ...
[6]
Endearing engines: the Farmall Cub tractor - Irish Farmers Journal
May 5, 2021 · The tractor was offset to the left, while the driver's seat and steering wheel were to the right. This concept was called “CultiVision” and ...
[7]
Cub at Hinsdale in 45 ? - Technical IH Talk - Red Power Magazine
Feb 3, 2014 · In Guy Fay's book on the prototypes it states that a big dealer get together was held in the fall of 1945 at Hinsdale and the Cub along with an ...Missing: Progress Show
[8]
https://www.brokentractor.com/p/farmall-cub-red-demonstrator-tractor-specs-parts-serial-number-guide-farmall-cub-reddemonstrator-tractor-specs/
[9]
Seeking Farmall Information - Yesterday's Tractors
Jan 31, 2008 · 1947 Called 'The largest tractor plant in the world" Louisville Works begins production of the small Farmall A & B's and the new Farmall Cubs.
[10]
[PDF] Farmall / International Cub and Lo-Boy Tractor Production Information
In 1947, 10,846 Cub tractors were produced. In 1948, 46,482 were produced. In 1950, 21,917 were produced. In 1951, 23,000 were produced. In 1952, 17,828 were ...Missing: timeline units
[11]
Cub Timeline
Throughout the thirty three years of Cub production many changes were made to the tractors appearance as well as its performance. Here are the known changes.Missing: hydraulics | Show results with:hydraulics
[12]
IHC and McCormick-Deering: The Red Tractors of France
Feb 27, 2014 · The French Cub was built from 1955 to 1957, when it was replaced with the French Farmall Super Cub produced until 1964. Photo by Lee ...
[13]
TractorData.com Farmall Cub tractor engine information
### Farmall Cub Engine Specifications
[14]
Farmall Cub Full Specifications - Tractors - MachineryLink
FARMALL CUB ENGINE. Description: International Harvester 1.0L 4-cyl gasoline ... POWER TAKE-OFF (PTO). Rear PT: independent. Rear RP: 1600, 1800 (counter ...
[15]
Capacities & Specifications - FarmallCub.Com
Belt & PTO ; Pulley Face, 4 ½ in. ; Power Take-Off Shaft Speed(counterclockwise rotation) ; Low Idle (no load), 475 rpm ; Fast Idle (no load), 1800 rpm.Missing: details | Show results with:details
[16]
TractorData.com Farmall Cub tractor transmission information
### Farmall Cub Transmission Summary
[17]
IHC Farmall Cub - Featured Tractor
The Farmall Cub was produced from 1947-1964 by International Harvester in Louisville, KY, with a 59.5ci engine rated at 12 horsepower.<|control11|><|separator|>
[18]
TractorData.com Farmall Cub tractor dimensions information
Apr 28, 2024 · Farmall Cub Dimensions ; Wheelbase, 69.25 inches 175 cm ; Length, 99.325 inches 252 cm ; Width, 48.25 inches 122 cm ; Height, 62.75 inches 159 cm.Missing: ground clearance fuel tank cooling electrical
[19]
TractorData.com Farmall Cub tractor information
Jul 14, 2023 · Farmall Cub Power ; Drawbar (claimed), 8.9 hp 6.6 kW ; Belt (claimed), 9.75 hp 7.3 kW ...
[20]
International Harvester Cub Lo-Boy Dimensions - Tractor Data
Apr 28, 2024 · Wheelbase, 62 inches 157 cm. Length, 92 inches 233 cm. Width, 48.25 ... Clearance (front axle), 14 inches 35 cm. Clearance (rear axle), 14 ...Missing: ground | Show results with:ground
[21]
Cub Hydraulic Lift - Yesterday's Tractors
Jul 4, 1999 · I have come across a IHC anouncement dated October, 1948 that states "The Touch-Control hydraulic system is now available for Farmall Cub ...
[22]
1975 IH Cub (red) - Yesterday's Tractors
Sep 8, 2005 · The 1975 IH Cub has more power than most Cubs, can handle a 59" mower, but has limits. Fast Hitch has a socket between rear wheels. Belly ...Missing: 1964-1975 steering
[23]
https://www.steinertractor.com/tractor/Farmall-Cub-Steering-Parts
[24]
Red 1979 International Cub . - General Chat - Red Power Magazine
Jul 6, 2015 · The Farmall Cub started at #501. Then in 1964 Harvester re-named the tractor the International Cub and started with serial number 224704.1979 Farmall Cub (Red #253479) - Red Power MagazineTractor of the Week #4 ( The Farmall Cub ) 1947 to 1979. Post your ...More results from www.redpowermagazine.comMissing: 82 1975-1979<|control11|><|separator|>
[25]
[PDF] Advertising Brochure: Farmall A, B & C - UNL Digital Commons
Farmall Cub has adjustable tread (40-56"), 20" crop clearance. Super-A has adjustable front axle (40-68"), 21" crop clearance. Farmall C has adjustable front ...
[26]
None
### Summary of Farmall Cub Touch-Control Hydraulic System
[27]
https://www.jensales.com/content/ppp/international-harvester-touch-control-service-manual.pdf
[28]
Tractor PTO Shafts
The Farmall Cub uses a 15/16th inch 10-spline PTO that rotates counter-clockwise at 1800 RPMs. The Cub can only use powered implements specifically designed for ...
[29]
TractorData.com Farmall Cub tractor attachments information
Apr 28, 2024 · Attachment overview. 42" mower deck. 60" mid-mount mower deck. Blade. Wagner 45 loader. International 1000 loader ...Missing: Harvester | Show results with:Harvester
[30]
Cub Implement Manuals
Cub Implement Manuals: Belt Pulley and Power Take-Off Attachments, Cub-3 Spring Tooth Field Cultivator Manual, Cub-6 Tool Bar - Rear Manual, Cub-144 Cultivator ...
[31]
Ready Power Cub engine Generator - FarmallCub.Com
Jul 24, 2022 · This model is shown in a catalog from 1951. The model designation breaks down as: R - IH gasoline engineGenerating Power With a Cub - FarmallCub.ComCould a Cub run this? - FarmallCub.ComMore results from farmallcub.comMissing: attachment | Show results with:attachment
[32]
None
### Summary of Nebraska Test 575: McCormick Farmall Cub
[33]
None
Error: Could not load webpage.<|control11|><|separator|>
[34]
Engine oil | Farmall Cub Forum
Oct 5, 2017 · The Cub engine oil calls for SAE-30 thru SAE-10 depending on the outside Temperature. When I look up these oil weights on Quaker States website they say not ...engine oilCant seem to find ND30 OilMore results from farmallcub.comMissing: specification | Show results with:specification
[35]
CARB FROSTING UP | Farmall Cub Forum
Dec 14, 2009 · The frosting of carburetors is a common occurance during cool/cold weather with high humidity. The frosting is caused by "Latent Heat of ...New to me Farmall Cub - First oil changeengine oil | Farmall Cub ForumMore results from farmallcub.comMissing: SAE | Show results with:SAE
[36]
[PDF] FARMALL CUB - OTMV.nl
The cushioned coil spring smooths our the bumps. transmission . provides a speeds forward (2, 3. and 61% m.p.h.) and 24 m.p.h. in reverse. Shafts.
[37]
TractorData.com Farmall Cub tractor tests information
Apr 28, 2024 · Farmall Cub Tests ; Belt fuel use (max), 1.1 gal/hour 4.2 l/hour ; Drawbar performance ; Max power, 9.87 hp 7.4 kW ; Gear 2 used for power test.Missing: per | Show results with:per
[38]
TractorData.com Allis Chalmers G tractor information
Dec 28, 2022 · Allis Chalmers G ; Total built, 29,976 ; Wheelbase, 68.5 inches 173 cm ; Weight, 1285 to 1400 pounds ; Front tire, 4.00-12 ; Rear tire, 6-30.
[39]
The Allis-Chalmers Model G Rear-Engine Tractor - Farm Collector
Sep 4, 2018 · The maximum drawbar pull for the Model G was 1,167 pounds with a 100-pound wheel weight added to each front wheel, giving a total weight of ...
[40]
Allis-Chalmers - Model G - Old Iron Garage
The Allis-Chalmers Model G tractor announced in 1948 heralded a new era in farm power ... Production & Serial Numbers. Total Produced: 29976. 1948: 6. 1949: 10961.
[41]
Allis Chalmers G | Yesterday's Tractors Forums
However, production fell far short of their expectations and less than 30,000 ended up being built.
[42]
TractorData.com Massey-Harris Pony 11 tractor information
Massey-Harris Pony 11 ; Diameter, 6 inches 15 cm ; Width, 5.5 inches 13 cm ; RPM, 1990 ; Speed, 3300 ft/min 1005.84 meters/min ; Charging system, generator ...
[43]
Pony 11 - Massey-Harris - Old Iron Garage
Total Produced: 21,669. 1947: 1001 Adjustable Front Axle, 1001 Standard Front Axle. 1948: 1001A Adjustable Front Axle, 1003 Adjustable Front Axle, ...
[44]
pony hydaulic strength - Yesterday's Tractors
Jan 19, 2007 · The stock Pony hydraulic system is insufficient for a loader. A separate, stronger system is needed, though a Pony sales brochure shows a Pony ...Pony hydraulics? - Yesterday's Tractors1951 Massey Harris Pony , Max.. Hydarulic lifting capacity.More results from www.yesterdaystractors.comMissing: durability | Show results with:durability
[45]
Massey-Harris Pony - Tractors - Konedata - Koneviesti
In total, about 29,000 Ponies were produced in Canada, and nearly 90,000 in France. This is an automated translation. Please report any issues in the ...<|separator|>
[46]
TractorData.com Ford 8N tractor information
May 18, 2021 · Ford 8N Power ; Drawbar (claimed), 23.16 hp 17.3 kW ; PTO (claimed), 27.32 hp 20.4 kW ; Drawbar (tested), 21.95 hp 16.4 kW ; PTO (tested), 23.24 hp
[47]
Farmall Cub
The Farmall Cub was the smallest tractor manufactured by International Harvester (IH) under the Farmall, International, and McCormick-Deering names. Built 1947 ...Missing: manufacturer | Show results with:manufacturer
[48]
https://www.savethecub.com/cub-production.pdf
[49]
1947-'64 Farmall Cub | The Online Automotive Marketplace
Mar 25, 2024 · The Cub rolled out with a 10hp, 59.5-cu.in. L-head or side-valve engine, with 6.5:1 compression, coupled to a three-speed transmission.
[50]
No Reserve: 1948 McCormick Farmall Cub Tractor - Bring a Trailer
Jun 23, 2025 · Auction Result. Winning Bid, USD $5,700 by slash407. Auction Ended, Monday, June 23 at 11:19am.
[51]
https://farmallcub.com/community/forums/cubfest-and-tractor-show-announcements-discussio.8/
[52]
International Harvester / Farmall Cub Parts - Yesterday's Tractors
◊ Farmall Cub - Hydraulic System (5). Hydraulic cylinders, Spool valve kits, bushings, control valves, hydraulic pumps, cylinder seal kits, covers, bushings ...Missing: trends upgrades
[53]
Mini Tractors China - 4WD High Productivity Farm Use - Alibaba.com
4.3 332 Discover our range of mini tractors china, perfect for small farms and agricultural tasks. Durable, efficient, and easy to use. Buy now for top quality!