Fact-checked by Grok 2 weeks ago

IBM Personal Computer AT

The IBM Personal Computer AT (model 5170) was a 16-bit personal computer developed and released by IBM in 1984 as the successor to the IBM PC XT, featuring the Intel 80286 microprocessor operating at 6 MHz, 256 KB or 512 KB of base RAM expandable to 3 MB or more via add-on cards, a standard 1.2 MB high-density 5.25-inch floppy disk drive, and an optional 20 MB fixed hard disk drive, all housed in a desktop chassis with eight expansion slots supporting the new 16-bit ISA bus architecture. Designed primarily for professional, business, and multitasking applications, it provided approximately twice the processing speed of the 8-bit IBM PC XT while maintaining full backward compatibility with existing IBM PC software, peripherals, and the MS-DOS operating system (version 3.0 and later). Announced on August 14, 1984, with first shipments in September, the initial models included the base Model 68 (256 RAM, no hard drive, priced at $3,995) and the upgraded Model 99 (512 RAM, 20 MB hard drive, priced at $5,795), both utilizing a Type 1 motherboard and supporting an optional Intel 80287 math coprocessor for enhanced numeric processing. Key innovations included a battery-backed for date and time management, an enhanced 84-key with separate cursor and keys, a keylock for system security, and integrated diagnostics via beep codes and error reporting, all integrated on the system board to simplify for programmers through the . The system's power supply delivered 192 watts, supporting up to 450 VA input, and it featured seven channels (four 8-bit, three 16-bit) and 16 interrupt levels via dual 8259A controllers for efficient I/O handling of devices like / ports, fixed disks, and diskettes. Subsequent updates expanded the lineup: in October 1985, Model 239 introduced a Type 2 motherboard with a 30 MB hard drive option; and in April 1986, Models 319 and 339 upgraded to an 8 MHz clock speed, 512 KB base RAM, 30 MB hard drive, and—for the 339—an enhanced 101-key keyboard divided into typing, numeric, cursor, and function sections with status indicators. Memory addressing supported 1 MB in real mode and up to 16 MB physical (1 GB virtual per task) in protected mode, with 640 KB conventional RAM and extended memory beyond 1 MB, enabling advanced features like multitasking and memory protection not feasible on prior 8-bit systems. Storage interfaces allowed concurrent operations on up to two fixed drives (up to 1,024 cylinders, 16 heads) and two diskette drives, with error correction via ECC for reliability in professional environments. The PC AT's , including its 16-bit bus and standardized expansion capabilities, established the "AT" form factor and compatibility standard that influenced personal computing design for years, supporting networking, high-level languages like and , and adapters while operating in environments from 10–43°C with low noise output of 42 dB. Production continued until April 1987, with approximately 900,000 units sold, paving the way for the line while remaining a for expandable, high-performance desktop systems.

Development and Release

Naming and Origins

The designation "AT" for the IBM Personal Computer AT is widely understood to stand for "Advanced Technology," reflecting its advancements over prior models, though IBM did not formally expand the acronym in public documentation. This naming emphasized the system's incorporation of cutting-edge features, positioning it as a significant in IBM's personal computing lineup. Development of the PC AT originated in 1982–1983 within IBM's Boca Raton facility, initially as a led by Don Estridge, building on the commercial success of the IBM PC (1981) and its XT extension (1983). The initiative responded to the rapid growth in software demands, exemplified by applications like , which strained the capabilities of earlier 8088-based systems and necessitated higher performance for business users. Key efforts focused on integrating Intel's 80286 processor to enable expanded memory addressing and faster processing, marking a shift toward 16-bit architecture. The project fell under IBM's Entry Systems Division (ESD), formalized on August 1, 1983, which absorbed the PC development team and scaled operations amid increasing competition from clones. At launch in September 1984, IBM priced the base model between US$4,000 and $6,000, equivalent to approximately $12,000–$18,000 in dollars, targeting and markets while balancing affordability with premium positioning.

Announcement and Market Entry

IBM announced the Personal Computer AT on August 14, 1984, via official Announcement Letter 184-097, marking its entry into the high-performance personal computing market. The system, referred to as "Advanced Technology," was unveiled as a significant upgrade for professional and corporate environments, with first customer shipments scheduled for September 14, 1984. emphasized its enhanced processing power—more than twice that of the PC XT—through the microprocessor, which supported multitasking for improved productivity in office applications. At launch, the PC AT was offered in two primary configurations to suit varying needs: Model 68 with 256 base and a 1.2 5.25-inch floppy drive, expandable to 512 , and Model 99 with 512 , the floppy drive, and an optional 20 for faster data access. Systems were bundled with PC DOS 3.00, along with the "Exploring the IBM Personal Computer AT" software to aid users in leveraging its capabilities. This setup targeted corporate users seeking reliability and expandability, including eight expansion slots for peripherals and an integrated battery-backed clock/calendar. The market entry strategy focused on positioning the PC AT as the premier choice for business multitasking and data-intensive tasks, differentiating it from consumer-oriented systems like the PCjr.

Technical Specifications

Processor and Memory

The IBM Personal Computer AT utilized the as its , a 16-bit capable of operating in both and . In , it maintained compatibility with the 8086/8088 , supporting up to 1 MB of contiguous addressing through 20-bit addresses organized in 64 KB segments. introduced advanced features such as with four privilege levels, addressing up to 1 GB, and physical addressing limited to 16 MB via 24-bit addresses, enabling more robust multitasking and larger application support. The processor interfaced with a 16-bit data bus, facilitating faster and I/O operations compared to the 8-bit bus of prior models. The base clock speed of the 80286 was 6 MHz, corresponding to a 167 ns clock cycle, with bus cycles timed at 500 ns for 16-bit accesses. In 1986, IBM offered an optional upgrade to an 8 MHz 80286 variant, which increased processing throughput while maintaining compatibility with the system's architecture. This configuration delivered approximately 1.2 MIPS of performance at 6 MHz, roughly doubling the computational capability of the IBM PC XT's 8088 processor, which operated at around 0.6 MIPS under similar workloads. The enhanced efficiency stemmed from the 80286's improved instruction execution, including pipelined operations and reduced wait states for internal processing. Memory in the AT consisted of 256 KB or 512 KB of standard onboard dynamic RAM (DRAM), utilizing parity checking for single-bit error detection—employing an additional parity bit per byte (or two for 16-bit words)—to enhance reliability in business environments. This base memory formed the lower 640 KB conventional address space, with expansion possible up to 16 MB total through add-on cards in the system's slots, where extended memory began at 1 MB. Access times were optimized at one wait state for a three-clock-cycle read or write, and memory size was dynamically reported via BIOS interrupt 12h in 1 KB increments. Parity errors triggered interrupt 2, halting operations to prevent data corruption. A key innovation was the inclusion of a battery-backed () implemented with the MC146818 chip, marking the first such feature in an PC model and replacing manual date/time setup from boot. This provided timekeeping at whole-second resolution using a 32.768 kHz , along with alarm functions, periodic interrupts at rates up to 1.024 kHz, and 64 bytes of RAM for non-volatile storage of , such as size, disk types, and flags. The RAM was accessed via I/O ports 70h (address) and 71h (), with a for integrity verification; low battery or errors prompted diagnostic messages like "Time & Date Not Set." The operated independently of the main clock, using interrupt vector 8 (IRQ8) for updates, ensuring persistent setup across power cycles.

Expansion Bus and Peripherals

The IBM Personal Computer AT introduced the (ISA) bus, a 16-bit expansion bus designed to match the capabilities of the processor and enable greater system expandability compared to the 8-bit bus in prior models. This architecture featured 98-pin edge connectors on the motherboard's expansion slots, which integrated the original 62-pin 8-bit design with an additional 36 pins to support 16-bit data transfers, allowing for faster I/O operations and compatibility with a broader range of devices. The bus operated at the system's clock speed, typically 6 MHz in early AT models and 8 MHz in later configurations, providing a theoretical maximum throughput of around 8 MB/s for 16-bit operations, though real-world performance was often lower due to overhead. It supported 24-bit addressing, enabling to up to 16 MB of total memory space, including the conventional 640 KB base memory limit for applications and beyond that threshold for protected-mode operations. To maintain , the bus incorporated signals like IOCHRDY (I/O Channel Ready), which allowed 8-bit peripherals to insert wait states during 16-bit cycles, preventing timing mismatches and ensuring reliable operation with XT-era cards in the extended slots. Peripheral support was enhanced through the bus's expanded signaling, accommodating advanced graphics adapters such as the and for high-resolution monochrome text, alongside the for basic color graphics, and the new , which utilized the 16-bit pathway for up to 640x350 resolution with 16 simultaneous colors from a palette of 64. The motherboard included two serial ports () and one parallel port () directly connected to the bus, with expansion cards providing additional ports or specialized interfaces; the serial port also served as the primary connection for early devices, foreshadowing dedicated mouse ports in subsequent IBM systems. Power for these peripherals was distributed via dedicated pins on the 98-pin connectors, supplying +5 V (multiple pins for high current), +12 V, -5 V, and -12 V rails—offering more robust delivery than the XT's 62-pin slots, which had fewer power pins and lower capacity. Despite its innovations, the bus exhibited limitations inherent to its design, including a maximum effective speed of 8 MHz in standard AT implementations, which introduced bottlenecks when paired with faster processors and required additional wait states for 8-bit devices that could halve transfer rates during mixed operations. These constraints highlighted the need for future bus evolutions, but the remained a foundational standard for PC expandability into the .

Storage and Input/Output

The IBM Personal Computer AT incorporated advanced storage options designed to enhance data handling capabilities over its predecessor, the XT model. Standard configurations included a 1.2 MB high-density 5.25-inch floppy disk drive, capable of supporting up to 1.2 MB of formatted capacity using high-density media at 96 tracks per inch (TPI). This drive was incompatible with the XT's 360 KB double-density disks for high-capacity operations without adapters or media changes, as the high-density mechanism required specific signaling and diskette types to prevent data errors or drive damage. An optional hard disk drive provided 20 MB of storage using run-length limited (RLL) encoding on the ST-506 interface, allowing for denser data packing with 26 sectors per track compared to the modified frequency modulation (MFM) standard's 17 sectors, thereby increasing capacity while maintaining compatibility with existing controllers. The hard disk controller, implemented via the integrated Fixed Disk and Diskette Adapter, supported up to two ST-506/412 drives and a total storage capacity of 40 MB, facilitating reliable fixed-disk operations through 16-bit data transfers aligned with the AT's bus architecture. Input/output interfaces on the AT emphasized expandability and integration for peripheral connectivity. The system featured an integrated controller using the 8042 microcontroller, which managed bidirectional with the 84-key via a 5-pin and handled scan code processing through interrupt 9. Standard I/O provisions included two RS-232C for asynchronous communication (base addresses at hex 3F8-3FF and 2F8-2FF) and one for printer attachments (base address at hex 378-37F), enabling connections to modems, terminals, and printers without additional expansion cards in base models. A built-in , driven by the channel 2 output at hex 61, provided basic for system events and diagnostics via simple tone generation, though no dedicated was included, limiting capabilities to beep-based alerts. The AT's power supply unit was a 192 W switched-mode design with fan cooling to mitigate the overheating problems observed in the original PC's linear supply, ensuring stable operation under load from the 80286 processor and peripherals. It delivered +5 V at 28 A for logic circuits, +12 V at 7 A for motors and drives, -5 V at 0.3 A for analog support, and -12 V at 0.8 A for serial port needs, with a "power good" signal to sequence startup and protect against voltage fluctuations. However, the supply required a minimum load (e.g., 7 A on +5 V and 2.5 A on +12 V) for regulation, which could lead to instability in lightly configured systems without additional resistors or drives, contributing to long-term reliability concerns in aging units.

Models and Configurations

Base Models

The IBM Personal Computer AT, designated model 5170, was announced on August 14, 1984, with first shipments in September. It utilized an microprocessor operating at 6 MHz. Base configurations were offered as Model 68 (256 KB RAM, no hard drive, priced at $3,995) or Model 99 (512 KB RAM, 20 MB , priced at $5,795), both using a Type 1 and including a 1.2 MB 5.25-inch high-capacity floppy drive alongside PC DOS 3.0 as the operating system. The design emphasized expandability through eight 16-bit slots, supporting peripherals like serial/parallel adapters for connectivity. Graphics adapters such as or CGA were optional via expansion cards. Later base variants included 8 MHz processor options before the model's phase-out. In October 1985, Model 239 was introduced with a Type 2 and a 30 MB hard drive option. Production of the model 5170 ran from 1984 until its discontinuation on April 2, 1987, with over 100,000 units manufactured. The system featured a full-size form factor measuring 21.3 x 17.3 x 6.4 inches (width x depth x height) and a characteristic metal casing weighing approximately 37–43 pounds depending on drive configuration.

Optional Upgrades and Variants

In 1986, IBM introduced an 8 MHz upgrade for the AT, which boosted the clock speed of the processor from the original 6 MHz through a new Type 3 . This upgrade was released in April 1986 as part of the enhanced Models 319 and 339 configurations and maintained compatibility with existing AT chassis, allowing users to swap the without replacing the full system enclosure. Model 319 featured 512 base and a 30 MB hard drive, while Model 339 added an enhanced 101-key . The higher clock speed improved overall performance for demanding applications, supported by updated dated November 15, 1985. These configurations offered 512 of base on the , upgradable to 640 onboard, to better support multitasking and larger software loads under or PC DOS. They could be further expanded using IBM's official options. Regional variants included localized keyboards and power supplies adapted for standards like 220-240V AC, while retaining the core 80286 architecture and capabilities. Accessory options expanded the AT's utility in enterprise environments, notably the AT/GX emulator card, which provided hardware-based compatibility for connecting to systems via the 3270 protocol. This card, compatible with the AT's bus, enabled seamless integration as a for and terminal emulation without sacrificing general-purpose computing functions. The maximum factory configuration without third-party boards reached 3 MB of , achieved by combining onboard with up to two IBM 512 modules installed in dedicated slots. Production of the Personal Computer AT began to phase out in 1987 with the introduction of the IBM Personal System/2 (PS/2) line, which aimed to succeed the AT through advanced features like Micro Channel Architecture. Remaining inventory and upgrade kits were sold through authorized channels until 1988, marking the end of official support for the 5170 model as IBM shifted focus to the PS/2 ecosystem.

Software Ecosystem

Operating Systems

The IBM Personal Computer AT (Model 5170) shipped with 3.00 as its bundled operating system, released in August 1984 specifically to support the AT's hardware advancements, including compatibility with the 1.2 MB high-density 5.25-inch floppy drives and hard disk partitioning using the FAT16 file system, allowing partitions up to 32 MB in size. This version of built on prior releases by incorporating support for the AT's 80286 processor in , enabling efficient handling of larger storage media without requiring third-party drivers for basic operations. Beyond the standard DOS installation, the AT supported more advanced operating systems that leveraged its protected mode capabilities. IBM OS/2 1.0, jointly developed with Microsoft and announced in April 1987, was previewed and designed for 80286-based systems like the AT, providing a 16-bit multitasking environment with a command-line interface and support for up to 16 MB of memory in protected mode. Additionally, Microsoft's Xenix, a Unix-like operating system variant licensed from AT&T, was certified for the AT and utilized the 80286's protected mode to enable multi-user and multitasking features, making it one of the earliest Unix implementations on PC hardware. The AT's software bundle included as the primary BASIC interpreter, distributed on the DOS installation floppies rather than embedded in ROM, reflecting the removal of the cassette-based BASIC variant from earlier models due to the absence of a cassette port on the AT. For early multitasking on DOS, users could employ third-party solutions like Quarterdeck's DESQview, released in 1985, which provided text-mode windowing and task switching for DOS applications, or Microsoft's , also launched in 1985, offering with tiled windows atop DOS. Installation of PC DOS 3.00 on the AT typically began by booting from a set of 5.25-inch floppy disks, with the process involving formatting the hard drive (if present) and copying system files, after which the OS could access the AT's (RTC) chip via new DOS commands like DATE and TIME for automatic system date and time setting upon boot. This RTC support eliminated the need for manual date entry required on prior IBM PCs without battery-backed clocks. The AT maintained backward compatibility with software designed for the original PC and XT models running under 2.x, allowing most existing applications to execute in without modification.

Compatibility and Backward Support

The IBM Personal Computer AT was engineered to ensure with the software ecosystem of the earlier IBM PC and PC XT models. The 80286 processor supported operation, which emulated the addressing and instruction set of the 8086/8088 processors, allowing all existing IBM PC and XT software to run without modification. This compatibility was essential for maintaining the large library of applications developed for the 8088-based systems, including and games. However, to leverage the 80286's capabilities—such as expanded memory addressing up to 16 MB and enhanced multitasking—software developers needed to recompile or rewrite programs specifically for the new architecture. On the hardware side, the AT's 16-bit expansion bus provided bridging for peripherals from the 8-bit bus of the PC XT. The bus design allowed 8-bit cards to function in the AT's slots through signaling, where the extra address and data lines were ignored, enabling users to reuse expansion cards like graphics adapters and network interfaces without replacement. For storage , the AT's controller supported the 360 double-density format used in XT systems, allowing direct integration of such drives with appropriate density settings. The AT's initial BIOS, stored in ROM and dated January 10, 1984, prioritized compatibility but had limitations, including the absence of functionality, which necessitated manual configuration of peripherals via jumpers and setup utilities. This BIOS structure supported real-mode operations for legacy hardware while introducing protected-mode routines for new features, though it required users to handle manually. Software such as Windows 1.0, released in 1985, took advantage of the AT's increased memory capacity—up to 3 MB via expansion—to deliver smoother multitasking and graphical interfaces compared to XT performance. To facilitate transitions from XT systems, IBM supplied an advanced diagnostic diskette with the AT, which included tests for verifying the functionality of XT peripherals when installed in the AT bus, such as serial ports, parallel adapters, and fixed-disk controllers. These diagnostics helped identify compatibility issues early, ensuring reliable integration of mixed-generation hardware. 3.00, bundled with the AT, included enhancements like support for 1.2 MB floppy drives and larger hard disks to bridge the gap between XT and AT environments.

Operational Challenges

Hardware Reliability Issues

The IBM Personal Computer AT (model 5170) experienced several notable hardware reliability issues, particularly with its storage subsystems, which contributed to user frustration in the mid-1980s. The original 20 MB hard disk drive, manufactured by Computer Memories, Inc. (model 6426-S), suffered from exceptionally high failure rates, often necessitating multiple replacements per system due to mechanical instability and data integrity problems that led to frequent data loss. These drives failed to meet the AT's performance specifications for track-to-track and average seek times, exacerbating reliability concerns in production environments. In response, IBM conducted a supplier switch to Seagate's ST-4026 model and released firmware updates along with enhanced diagnostic tools in May 1985 to bolster error detection and correction mechanisms, aiming to mitigate data corruption risks. Upgrades involving Run Length Limited (RLL) controllers on 20 MB Seagate ST-225 drives, intended to expand capacity to approximately 30 MB, introduced additional vulnerabilities; early implementations often resulted in owing to inadequate error correction tailored for the higher encoding density on legacy (MFM) hardware. This compatibility-related drive issue compounded the AT's storage challenges, though it was less prevalent in stock configurations. For the floppy drive, the standard 1.2 MB high-density 5.25-inch mechanism encountered mechanical issues when handling unformatted double-density disks, occasionally causing the head carriage to jam due to mismatched rotational speeds (300 rpm for double-density vs. 360 rpm for high-density), which could require manual intervention or an external density selection switch on controllers to resolve. Deteriorated lubrication in these drives over time also led to head carriage failures, necessitating cleaning and relubrication with silicone-based compounds for restoration.

Compatibility and Performance Limitations

The processor in the IBM Personal Computer AT supported , which enabled access to up to 16 MB of physical and provided features like and virtual addressing through segmentation and descriptor tables. However, most contemporary software, including applications, operated exclusively in to maintain compatibility with earlier 8086/8088-based systems, restricting effective memory access to 1 MB total, with only 640 KB available as for programs. To utilize memory beyond 1 MB, users relied on specialized drivers such as the Expanded Memory Specification (EMS) for page-swapped access or the later Extended Memory Specification (XMS), which required switching to via software like , but these solutions introduced complexity and were not natively supported by . The AT's expansion bus, while upgraded to a 16-bit design operating at 8 MHz, suffered from bottlenecks when mixing legacy 8-bit cards with 16-bit peripherals, as the system inserted additional wait states to synchronize access. Specifically, 8-bit card operations incurred 2 to 4 wait states per cycle, extending bus cycle times to 750–1000 ns, compared to 0–2 wait states and 250–500 ns for 16-bit cards, effectively reducing throughput for mixed configurations to the equivalent of 4–5 MHz for legacy peripherals. This latency arose from the bus's , where the 80286 paused during transfers to accommodate slower 8-bit devices, limiting overall I/O efficiency in systems retaining older expansion cards. Although the 80286's facilitated basic multitasking capabilities, early implementations like (1985) and Windows/286 primarily relied on in , with limited use of for , leading to high CPU utilization due to inefficient context switching and the absence of optimized drivers. Without preemptive scheduling or dedicated kernel support—features more fully realized in later systems like 1.0 (1987)—task switching imposed significant overhead, often consuming substantial processor cycles and reducing responsiveness in multi-application scenarios. In benchmark comparisons, the PC AT demonstrated 50–100% better than the PC XT in tasks, such as arithmetic and string operations, owing to the 80286's improved instruction execution at 6 MHz compared to the XT's 4.77 MHz 8088. For instance, relative measurements showed the AT achieving roughly 1.5–2 times the speed of the XT in standard computing workloads. However, by 1986, with the introduction of 80386-based systems like the at 16 MHz, the AT lagged significantly, offering only about 25–50% of the 386's performance due to the latter's 32-bit and higher clock speeds.

Market Reception and Competition

Initial Sales and Reviews

The IBM Personal Computer AT achieved strong initial sales following its September 1984 launch. An estimated 350,000 units were sold by the end of 1985, contributing to 's personal computer division revenue exceeding $4 billion in 1984. The system's appeal stemmed from its advanced 80286 processor and enhanced capabilities, positioning it as a high-end upgrade for professional users transitioning from earlier IBM PC models. Priced at a base of $3,995 for the model 68 (256 RAM, no hard drive, system unit only), with configurations including 256 RAM, a monochrome display adapter, keyboard, and 1.2 floppy drive reaching around $4,000–$5,000, the AT was seen as expensive and targeted primarily at businesses. By 1986, IBM had reduced prices on AT models to improve competitiveness amid the growing clone market. Reviews from leading publications underscored the AT's strengths in performance and versatility while acknowledging its cost barriers. In 1984 coverage, praised the 80286's improved performance over the 8088 and expandability via 16-bit slots, positioning it as a benchmark for professional computing. Similarly, InfoWorld's 1984-1985 coverage highlighted the high price tag but praised its architecture, including capabilities and multitasking potential, which promised longevity for business applications. These assessments reflected the AT's role in elevating expectations for PC capabilities. Adoption was strong in corporate environments, accelerating the proliferation of productivity software like spreadsheets (e.g., ) and databases (e.g., dBASE III). This segment-driven success, amplified by hype from the prior year's announcement, solidified IBM's early dominance in enterprise computing before clone proliferation intensified.

Cloning and Industry Influence

The rapid success of the IBM Personal Computer AT spurred the development of compatible s, beginning with systems like the AT&T PC 6300 in late 1984, followed by the 286 in 1985, which reverse-engineered the AT in under a year. This was followed by the Tandy 3000 in 1985, the first PC AT from a major manufacturer, featuring the fully 16-bit processor and designed for broad compatibility with AT software and peripherals. The AT's (ISA) bus, reverse-engineered by these early cloners, quickly emerged as a industry for expansion slots, enabling modular hardware additions without proprietary restrictions. The clone expanded dramatically in the mid-1980s, capturing a substantial portion of through lower and equivalent ; by , non-IBM systems (including compatibles) accounted for over 60% of the PC , up significantly from prior years. For instance, AT&T's PC 6300, an XT-compatible based on the , launched in October at $2,495 for a configuration with 128K and dual floppy drives, significantly undercutting the IBM AT's base price of $3,995 (system unit only). This price advantage, combined with reliable compatibility via clean-room engineered from firms like —whose AT debuted in —drove , as clones used off-the-shelf components to match or exceed AT capabilities at reduced costs. IBM responded aggressively to the cloning threat, filing lawsuits in 1985 against several manufacturers for alleged of its , but these actions largely failed as courts upheld the legality of reverse-engineered, non-infringing alternatives that preserved functionality without copying code directly. This prompted IBM to attempt modifications in later models like the PS/2 to reduce clone compatibility, but third-party developers quickly adapted their ROMs to maintain seamless interoperability. The AT's profoundly shaped the industry, with compatible systems—built around the 80286 processor, bus, and —influencing the majority of personal computers sold by the late 1980s, shifting the market toward open standards and away from proprietary favored by competitors like Apple. This commoditization accelerated innovation in peripherals and software, as the bus's standardization fostered a vibrant of add-ons, ultimately eroding IBM's control while democratizing access to advanced computing.

Legacy and Evolution

Long-Term Impact

The IBM Personal Computer AT's introduction of the (ISA) bus in 1984 established a foundational expansion standard for personal computers, which influenced subsequent bus designs by enabling modular hardware additions and fostering compatibility across systems. This 16-bit bus architecture evolved into more advanced interfaces, with emerging in the early as a higher-performance replacement and (PCIe) further advancing serial connectivity for modern peripherals by the mid-2000s. Meanwhile, the AT's use of the processor introduced key concepts like operation and hardware, which became integral to the x86 family. These innovations laid the groundwork for the x86 lineage, with billions of processors shipped worldwide powering desktops, laptops, servers, and embedded devices as of 2024. The AT symbolized a pivotal shift toward open markets in personal computing, as IBM's decision to use off-the-shelf components and publish technical specifications encouraged third-party and , democratizing access to PC technology beyond proprietary systems. This openness accelerated industry standardization and competition, transforming the PC from a niche product into a mass-market . In contemporary culture, the AT has inspired retro emulation projects, such as and for cycle-accurate hardware simulation, and DOSBox-X for running DOS-era applications and games, preserving its software legacy for enthusiasts and historians. As of 2025, working IBM PC AT units hold collector value on platforms like , typically ranging from $200 to $500 depending on condition and completeness, reflecting interest among vintage hardware enthusiasts. These systems also serve educational purposes, illustrating computing history in museums, universities, and online courses focused on the evolution of personal technology. Economically, the AT contributed to the peak performance of IBM's Division, which generated approximately $4 billion in revenue by amid rapid market growth, before the division's challenges led to its sale to in 2005 for $1.75 billion.

Successors and Timeline

The (PS/2) line, launched in April , directly succeeded the PC AT by introducing enhanced architecture aimed at regaining market control through integrated features like VGA graphics, 3.5-inch floppy drives, and 72-pin memory modules. Prominent early models included the PS/2 Model 50 and Model 60, both utilizing 10 MHz processors and the proprietary 16-bit () bus, which supported faster 32-bit data transfer and basic plug-and-play capabilities but required new adapters incompatible with prior slots. In September 1988, IBM introduced the PS/2 Model 30 286 as a budget-oriented AT replacement, featuring a 10 MHz 80286 processor, 2 MB of RAM, and a hybrid design retaining 16-bit expansion slots for broader peripheral compatibility while incorporating PS/2 standards like for select components. Production of the PC AT ceased in mid-1987. The shift to PS/2 encountered significant hurdles due to the bus's proprietary nature and licensing fees, which hindered compatibility with the vast ecosystem of AT peripherals and third-party add-ons, thereby delaying PS/2 uptake and enabling ISA-based clone producers to capture greater market share. Official hardware support for the PC AT concluded around 1990. Throughout the , AT-compatible clones proliferated and dominated personal computing until the era began in 1993, extending the platform's influence beyond IBM's proprietary efforts.

References

  1. [1]
    [PDF] 1502494_PC_AT_Technical_Ref...
    This manual consists of nine sections, four of which describe the hardware aspects of the IBM Personal Computer AT including signal charts and register ...
  2. [2]
    http://www.minuszerodegrees.net/misc/IBM%20PC%20AT%205170%20announcement%20letter.txt
  3. [3]
    IBM PC AT (Model 5170) - PCjs Machines
    IBM PC AT (Model 5170) ; 5170 Models 68 and 99. Models 68 and 99 were introduced in August 1984: Model 68. Type 1 motherboard; 6 MHz CPU ; 5170 Model 239. Model ...
  4. [4]
    [PDF] IBM PERSONAL COMPUTER AT (R) 5170 MODELS 319 AND 339
    Jan 22, 2022 · The Enhanced Personal Computer Keyboard can be divided into five sections: o Typing section o Numeric pad o Cursor/screen controls o Function ...
  5. [5]
    How the IBM PC Won, Then Lost, the Personal Computer Market
    Jul 21, 2021 · On 1 August 1983, Estridge's skunkworks was redesignated the Entry Systems Division (ESD), which meant that the PC business was now ensnared in ...
  6. [6]
    AT can refer to any of the following - Computer Hope
    Jul 9, 2025 · Short for Advanced Technology, AT is an IBM computer introduced in 1984. The base model AT computer contained an 80286 processor, 256 k of RAM ( ...
  7. [7]
    The Dilemma of Lotus 1-2-3 - Korn Ferry
    Jan 10, 2024 · Designed to run on the recently introduced IBM PC, Lotus 1-2-3 helped birth the personal-computer revolution of the early 1980s by giving users ...Missing: motivation | Show results with:motivation
  8. [8]
    https://au.pcmag.com/old-desktop-pcs/42504/the-golden-age-of-ibm-pcs
  9. [9]
    Calculate the Value of $4000 in 1984 - DollarTimes
    2024, 2025. Calculate. $12,462. Adjusted for inflation, $4,000 in 1984 is equal to $12,462 in 2025. Annual inflation over this period was 2.81%. Value of a ...
  10. [10]
    Announcement Letter 184-097, August 1984
    Aug 14, 1984 · Announcement Letter Number 184-097 dated August 14, 1984 US - Last ... IBM 5178 PC Network Translator Unit DESCRIPTION Based on a high ...
  11. [11]
    IBM introduces the IBM 5170 PC/AT - Event - Computing History
    Aug 14, 1984 · Introduced in IBM Announcement Letter Number 184-097 dated 14th August 1984, the IBM PC/AT was basd on a 6 MHz Intel 80286 processor and included a 1.2MB 5.25" ...
  12. [12]
    A 286 Running Like a 386? - DOS Days
    Introduced with a 6 MHz clock speed in the IBM 5170, it scored a MIPS rating of 1.2. 8 and 10 MHz versions were also available, but the fastest version at ...
  13. [13]
    IBM Compatible Computers
    They used either 8088 or 8086 CPUs, both of which are 8-bit chips running at 5 MHz (0.33 MIPS). They came with monochrome monitors and dual 5.25" floppy drives, ...
  14. [14]
    [PDF] A Real Time Clock Correcting Program for MS-DOS-Based ... - DTIC
    Jan 19, 2024 · With the introduction of the PC/AT in August, 1984, a hardware clock system - a Motorola. MC146818 CMOS RTC and some associated circuitry - was ...
  15. [15]
    PC Buses - DOS Days
    The ISA bus is an 8-bit or 16-bit communication highway that originally ran at the same clock speed as the CPU. In the original IBM PC and XT, they used the ...
  16. [16]
    ISA bus pinout and wiring @ old.pinouts.ru
    Aug 19, 2018 · 98 pin (62+36)ISA EDGE female connector layout 98 pin (62+36)ISA ... Source(s) of this and additional information: IBM PC/AT Technical ...
  17. [17]
    [PDF] IBM Personal Computer AT - Technical Reference
    This manual describes the various units of the IBM Personal. Computer AT and how they interact. It also has information about the basic input/output system ( ...
  18. [18]
    ST506 disk interface - Computer History Wiki
    Dec 2, 2023 · The use of RLL increased storage capacity by 50%, by squeezing 26 sectors into a track instead of 17. Because of the identical hardware ...
  19. [19]
    The power supply's Original IBM PC, XT and AT standards - Motocraft
    May 24, 2023 · The power supply provided +5 volts (V) and -5 V DC voltages. · Current: The +5 V line could provide up to 2.5 amperes (A) of current, while the - ...
  20. [20]
    https://www.motocraft.com/en/Article_detail/175/The-power-supply%27s-Original-IBM-PC%252C-XT-and-AT-standards
  21. [21]
    Should an old IBM PC AT power supply only function while loaded?
    Jul 26, 2019 · The AT power supply had a minimum load of 7A @ 5V and 2.5A @ 12V; some configurations of the IBM AT actually shipped with an internal 5Ω ...Missing: 28A | Show results with:28A
  22. [22]
    IBM 5170 / PC AT - The Centre for Computing History
    It was introduced in 1984 and included several "new" features such as a 6 MHz Intel 80286 processor, a 1.2MB 5.25" floppy drive and an improved keyboard.
  23. [23]
    IBM AT 5170 - BinaryValue.com
    Powered by the 16-bit Intel 80286 processor, the IBM AT introduced significant innovations, including EGA graphics, 16-bit expansion slots, and a 1.2MB 5.25" ...
  24. [24]
    IBM AT / 5170 / Type 3 // retrocmp / retro computing
    Sep 19, 2021 · Type 1, Model 68, 99: Announcement Letter 184-097, August 1984; Type 2, Model 239: Announcement Letter 185-116, October 1985; Type 3, Modell ...
  25. [25]
    IBM 5170 - Motherboard Versions - minuszerodegrees.net
    8 MHz, 13.8" x 9.4", Photo · 11/15/85, 1 bank of 512 KB, • The main crystal is 16 MHz (photo) • RAM: Same RAM bank and chips as the type 2 motherboard • ROM: ...
  26. [26]
    PS/2: the beginning of the end of the IBM PC - Pingdom
    Apr 2, 2012 · The PS/2 lineup of computers, introduced in 1987, was an effort by IBM to take back the initiative in the PC market.
  27. [27]
    IBM PS/2 Model 30 - Wikipedia
    On September 13, 1988, IBM launched the PS/2 Model 30 286, which features the ... For seventeen months between the discontinuation of the PC/AT and the ...
  28. [28]
    PC-DOS 3.x - WinWorld
    PC-DOS 3.x was introduced for IBM's 286 based AT computer. It adds support for IBM's 1.2mb floppy drive, hard disk partitions up to 32mb, and adds features ...
  29. [29]
    IBM PC DOS 3.00 - PCjs Machines
    Aug 14, 1984 · New features: 1.2MB floppy disk support; Hard disk support up to 32MB (original FAT16: partition type 04h); Redirector support; File sharing and ...
  30. [30]
    DOS 3.0, 3.1, and 3.2 - The OS/2 Museum
    IBM recommended at least 128KB of RAM for DOS 3.0. In version 3.0, DOS supported the high-density 1.2MB floppy media and introduced the previously mentioned ...
  31. [31]
    OS/2 1.0
    IBM and Microsoft announced OS/2 1.0 on April 2nd, 1987, with a projected shipping date in the first quarter of 1988.
  32. [32]
    IBM PC XENIX | OS/2 Museum
    Oct 26, 2012 · XENIX may have been the first multi-tasking, multi-user, protected-mode operating system available for the IBM PC/AT, and for the PC family in general.
  33. [33]
    https://retrocomputing.stackexchange.com/questions/219/80286-can-switch-from-real-mode-to-protected-mode-but-why-not-back
  34. [34]
    https://retrocomputing.stackexchange.com/questions/5165/choosing-a-vga-card-for-the-ibm-5162
  35. [35]
    The IBM PC - Cosmodoc
    Mar 19, 2024 · When the 80286 came around and increased the number of address lines from 20 to 24, it granted the system the ability to address 16 MiB (224) of ...
  36. [36]
    80286 can switch from real mode to protected mode - but why not ...
    Apr 22, 2016 · The 80286 couldn't switch back to real mode to support secure OS, due to slow BIOS access and the assumption that once protected mode was ...The move to protected mode on x86 - Retrocomputing Stack ExchangeFirst 80286 Based Computer - Retrocomputing Stack ExchangeMore results from retrocomputing.stackexchange.com
  37. [37]
    Choosing a VGA card for the IBM 5162?
    Dec 11, 2017 · The 5162, more commonly known as the IBM PC XT/286, uses a 16-bit expansion bus. Any 8-bit “ISA” VGA card should work fine (but they are rare), and most 16-bit ...<|separator|>
  38. [38]
    IBM 5150 - Floppy Drive Support - minuszerodegrees.net
    DOS 2.0 introduced support for 9 sectors per track, which increased the floppy capacity to 360 KB. ... IBM supplied in the IBM 5150 supports 360K drives.Missing: adapter | Show results with:adapter
  39. [39]
    IBM PC AT (Model 5170) ROMs - PCjs Machines
    This is the third BIOS for the IBM 5170. It is dated 15NOV85. It is found in type 2 motherboards running at 8 Mhz. U27 has the IBM part number of 61X9266 ...
  40. [40]
    IBM PC AT Advanced Diagnostics 2.07 - PCjs Machines
    IBM PC AT Advanced Diagnostics 2.07 offers options for system checkout, diskette formatting, copying, preparing for moving, and setup.
  41. [41]
    IBM PC-DOS v4.01 [5.25" 360K Floppy Disks] - Internet Archive
    May 18, 2021 · The ZIP file includes five 5.25" 360K floppy disk images created with a raw read utility in an MS-DOS computer with a standard 5.25" floppy disk ...
  42. [42]
    IBM 5170 PC/AT - The Silicon Underground
    Aug 14, 2024 · The 5170 came with 256K or 512K of RAM standard and a 1.2 MB high density 5.25″ floppy drive for storage. The 512KB model included a 20 megabyte ...
  43. [43]
    Full text of "PC Mag 1985-05-14" - Internet Archive
    By Charles Bermant IBM Fixes Disk Problems 38 PC MAGAZINE* MAY 28 ... HARD DISK SUPPORT FOR “OLD” PCS Integrating a hard disk system into a PC ...<|control11|><|separator|>
  44. [44]
    Hard Disks - DOS Days
    whilst the early pre-IDE (MFM and RLL) hard disk controller cards (ST-506, aka Winchester cards) started off as almost full-length cards, as technology ...
  45. [45]
    RLL controllers with MFM drives - Google Groups
    Seagate tests all of their ST225 and ST238 drives at RLL first. If they pass RLL, they're ST238s, if they fail, they test tham at MFM and ship them as ...Rll Controllers With Mfm... · Brynn Rogers · Dwight Gordon
  46. [46]
    IBM 5170 - Known Problems/Issues - minuszerodegrees.net
    Powering a 5170 motherboard using an XT-class power supply can sometimes cause problems. ... 5170 motherboard to get quite hot, beyond what you may think is ...
  47. [47]
    https://www.latimes.com/archives/la-xpm-1986-11-10-fi-28852-story.html
  48. [48]
    minuszerodegrees.net
    Faulty tantalum capacitors is a very common problem with the 5150 and 5160 motherboards. Visually inspecting the tantalum capacitors may (repeat: may) reveal ...
  49. [49]
    Memory in the MS-DOS era - Richard Downer
    Jul 10, 2020 · The PC AT, the Intel 80286, and XMS. IBM's PC AT, or model 5170, brought in the Intel 80286 CPU. This was a true 16-bit CPU and had a 24-bit ...
  50. [50]
    IBM PC expansion card latency - Retrocomputing Stack Exchange
    Jan 15, 2019 · The PC-AT did run 1 wait state on each 16 bit access, IO or memory, internal or card. Thus allowing 'full speed'. But it inserted 4 wait states ...Did mixing an 8 bit ISA card in a 16 bit ISA environment slow down ...ibm pc - What were wait-states, and why was it only an issue for PCs?More results from retrocomputing.stackexchange.comMissing: bottlenecks | Show results with:bottlenecks
  51. [51]
    Doing Windows, Part 3: A Pair of Strike-Outs | The Digital Antiquarian
    Jul 6, 2018 · That month, IBM released the PC/AT, a new model of their personal computer based around the more powerful Intel 80286 processor. Amidst the ...Missing: utilization | Show results with:utilization
  52. [52]
    386 Series--Compaq Bets Its Future on Fast PC - Los Angeles Times
    Nov 10, 1986 · The Deskpro 386 running at up to 16 megahertz (a measure of processing speed) is more than four times faster than a PC XT running at 4.77 megahertz.
  53. [53]
    IBM Profit Highest for Any Firm in Quarter - Los Angeles Times
    Jan 18, 1985 · International Business Machines Inc. reported Thursday that it earned a record $2.17 billion in the final quarter of 1984, ...
  54. [54]
    IBM Model AT personal computer, c. 1984.
    The AT was also introduced at a lower price than many experts anticipated, starting at $3995. Details. Category: Computing & Data Processing. Object Number ...
  55. [55]
    The Golden Age of IBM PCs | PCMag
    Mar 3, 2016 · IBM Personal Computer AT (1984)​​ Like the PC and XT before it, it inspired a large industry of copycats that kept much less expensive AT ...
  56. [56]
    Accidental Empires, Chapter 9 — Clones | I, Cringely
    Mar 7, 2013 · Compaq, in a major effort, cloned the AT in only six months and shipped 10,000 of its Deskpro 286 models before IBM had solved the CMI drive ...
  57. [57]
    The Compaq Deskpro 286 - YouTube
    Sep 19, 2025 · Let's dive into this classic 286 era computer system, The Compaq Deskpro 286! This machine was a lot of fun to get working and play around ...
  58. [58]
    Cut-Rate Computers, Get 'Em Here - Time Magazine
    Jul 21, 1986 · ... computer market, while IBM's share has fallen to 33%. Says John Roach, chairman of Tandy, which manufactures a $999 model: “1986 will be the ...
  59. [59]
    AT&T 6300; clash of the titans: round one.
    The base model AT&T 6300, with 128K RAM, two 360K floppy drives, one serial port, one parallel port, and monochrome monitor costs $2495.
  60. [60]
    Tales from 80s Tech: How Compaq's Clone Computers Skirted IBM's ...
    Aug 14, 2017 · In the 1980s, Compaq was the first company to produce a portable IBM-compatible machine legally, but they flirted with breaking copyright law in the process.
  61. [61]
    Why did IBM not law file suit or stop other companies cloning its PC?
    Jan 19, 2019 · When released in Fall 1984, it devastated IBM's share of the small computer market, allowing any manufacturer to legally clone the IBM PC. The ...Why couldn't IBM shut down the PC clones? - QuoraWhy did IBM fail to license CP/M-86, and how did that lead to their ...More results from www.quora.com
  62. [62]
    The Rise and Fall of the IBM PC - Retro Tech Reads
    Nov 9, 2021 · By the mid-1980s IBM had realized that they were rapidly losing control of the PC market, a market that they themselves had created, ...
  63. [63]
    Attack Of The Clones: How IBM Lost Control Of The PC Market
    Aug 25, 2021 · The clones, which were cheaper in most cases, took off and by 1985 dominated the overall sales of IBM PCs that ran Microsoft's DOS and used the ...
  64. [64]
    From ISA to PCIe: The Evolution of Computer Expansion Buses
    Jul 4, 2025 · Introduced by IBM in the early 1980s, ISA was a 16-bit bus designed to connect components like sound cards, modem cards, and graphics cards to ...
  65. [65]
    Chapter 39. From ISA to PCI Express
    The PCI Express is the successor to the PCI bus. This is a completely new type of I/O bus using a serial connection (like the buses USB, Firewire and SATA).
  66. [66]
    Intel 80286 microprocessor family - CPU-World
    The second generation of x86 16-bit processors, Intel 80286, was released in 1982. The major new feature of the 80286 microprocessor was protected mode.Missing: foundational concepts billions devices
  67. [67]
    The Paradox of x86 - by Babbage - The Chip Letter
    Apr 13, 2024 · Billions of processors have been shipped using the x86 ISA, generating over a trillion dollars in revenue for Intel. In part that's because ...
  68. [68]
    DOSBox-X - Accurate DOS emulation for Windows, Linux, macOS ...
    DOSBox-X is an open-source DOS emulator for running DOS applications and games. DOS-based Windows such as Windows 3.x and Windows 9x are officially supported.About the DOSBox-X project · DOSBox-X’s Feature Highlights · Release Notes · Wiki
  69. [69]
    https://www.userlandia.com/home/ibm-ps2-model-30-286
  70. [70]
    IBM Vintage Computers and Mainframes for sale - eBay
    4.6 3K · Free deliveryGet the best deals on IBM Vintage Computers and Mainframes and find everything you'll need to improve your home office setup at eBay.com.
  71. [71]
    The IBM 5150 Began the Classroom Technology Revolution
    Dec 7, 2016 · A 1983 brochure touted IBM Personal Computer as a solution “for the office, home, classroom.”
  72. [72]
    Lenovo Completes Acquisition of IBM's Personal Computing Division
    May 1, 2005 · Lenovo has paid IBM US$1.25 billion, comprised of approximately US$650 million in cash and US$600 million in Lenovo Group shares.
  73. [73]
    The PS/2 - IBM
    IBM's Personal System/2 established a new standard for how PCs got made and reset expectations around what they could accomplish.
  74. [74]
    1987 | Timeline of Computer History | Computer History Museum
    ### Summary of IBM PS/2 Release and Features
  75. [75]
    IBM PS/2 (Model 50) - Technical specifications - Kev009
    ... Intel 80286 (16 bit) Clock speed: 10 Mhz, one wait state. Coprocessor: socket for optional i80287 math coprocessor. Type of BUS: 16-bit MCA (Micro Channel)
  76. [76]
    IBM PS/2 (Model 60) - Technical specifications
    Apr 13, 2000 · The 10MHz 80286 microprocessor offers application growth capabilities and is designed to maintain compatibility with most current IBM personal ...
  77. [77]
    IBM PS/2 Model 30 286 - Computers of Significant History - Userlandia
    Nov 15, 2023 · Seven months later in April 1987 IBM announced the Personal System/2, a line of computers that thoroughly reimagined what the “IBM PC” was ...<|separator|>
  78. [78]
    1984 | Timeline of Computer History
    Its price was $2,500. Applications that came as part of the package included MacPaint, which made use of the mouse, and MacWrite, which demonstrated WYSIWYG ( ...
  79. [79]
    IBM PC 5150 Model Numbers | OS/2 Museum
    Sep 24, 2024 · It is worth mentioning that the new model 166 with 256K RAM cost $1,955 (June 1984), while the predecessor model 164 with only 64K RAM had ...Officially Announced Ibm... · March/april 1983 · Vaguely Documented Models
  80. [80]
    The PC Future That Briefly Was: IBM PS/2 and OS/2 - RS Online
    Aug 4, 2022 · A look back at the second generation IBM personal computer range and operating system which boasted numerous features which were advanced for the time.
  81. [81]
    The IBM PS/2: 25 Years of PC History | PCWorld
    Jul 9, 2012 · IBM announced four PS/2 models during its April 1987 launch: the Model 30, 50, 60, and 80. They ranged dramatically in power and price; on the ...
  82. [82]
    https://int10h.org/blog/2025/11/lost-ibm-at-model-bios-analysis/
  83. [83]
    OS/2 Museum | OS/2, vintage PC computing, and random musings
    This was a technical rather than architectural limitation. While the IBM PC/XT and PC/AT BIOS implementations were limited to two hard disks, the INT 13h ...OS/2 Timeline · OS/2 Warp · OS/2 Warp 4 · Michal Necasek<|separator|>