Bus Pirate
The Bus Pirate is an open-source hardware debugging and development tool that enables users to interface with electronic components and microchips using simple terminal commands, without requiring custom programming or complex setups. It supports a wide range of serial communication protocols, including 1-Wire, I²C, SPI, UART, and others such as JTAG and MIDI, allowing it to act as a versatile multi-tool for hardware hackers, prototypers, and engineers probing unknown devices or debugging circuits.[1][2] Originally developed by the open-hardware community at Dangerous Prototypes, the project emerged in 2008 as a response to the need for an affordable, universal interface for serial buses, with early serial prototypes (v0a and v1a) paving the way for the first USB-enabled version, v2go, which sold approximately 1,000 units through a Hack a Day fundraiser.[2] The v3 series, released starting in October 2009 and based on the PIC24FJ64GA002 microcontroller, became the most widely adopted iteration, featuring high-impedance modes, binary scripting, and user terminal interfaces for protocols like SPI, I²C, and UART, with production continuing through 2012.[2] Subsequent developments include the v4 model, introduced for early adopters with community-driven firmware enhancements, and the modern Bus Pirate 5 family launched in 2024, which incorporates advanced Raspberry Pi RP2040 (up to 133 MHz, 264 KB SRAM) or RP2350 (up to 150 MHz, 520 KB SRAM) microcontrollers.[1][2] These latest versions emphasize enhanced hardware features, such as 1.2–5 V buffered I/O on eight bidirectional pins, integrated voltage measurement on all pins and current measurement for the power supply, a programmable 1–5 V power supply delivering up to 500 mA with current limiting, a 320×240 IPS LCD display, 18 RGB LEDs for visual feedback, and 1 Gbit NAND flash storage, all accessible via a USB bootloader and VT100 terminal support.[1] The tool's open-source nature, including schematics, firmware, and documentation available on platforms like GitHub, has fostered a vibrant community for extensions and automation scripts, making it a staple in electronics education and hardware reverse engineering.[1][2]Introduction
Overview
The Bus Pirate is a universal serial bus interface device designed for programming, debugging, and analyzing microcontrollers and other integrated circuits (ICs).[2] It serves as a versatile tool in electronics prototyping by converting simple text commands sent from a computer serial terminal into electronic bus signals, enabling direct interaction with hardware components without requiring custom code or specialized equipment.[2] This functionality streamlines hardware hacking and development tasks, allowing users to probe, configure, and test circuits efficiently.[3] As an open-source project, the Bus Pirate's hardware schematics, firmware, and associated software are freely available under permissive licenses that vary by version (e.g., CC0 for PCB artwork and firmware, and GPL for the bootloader in earlier versions; MIT for Bus Pirate 5 firmware), hosted on buspirate.com, Dangerous Prototypes, and GitHub repositories.[2][4][5] The device typically takes the form of a compact, USB-connected unit featuring I/O pins for signal interfacing, an integrated power supply for target circuits, and support for an optional display in certain configurations.[2] The Bus Pirate emerged in 2008 as a hacker multi-tool developed by Ian Lesnet for Hack a Day, aimed at simplifying access to serial communication protocols in embedded systems development.[6] Since its inception, it has evolved through multiple generations to enhance usability and capabilities.[2]Development History
The Bus Pirate project originated in 2008 as an open-source universal serial interface tool developed by Ian Lesnet in response to the need for an affordable, multi-protocol hardware hacking device within the Dangerous Prototypes community.[7] Early prototypes, such as v0a and v1a, were serial-based designs using Microchip PIC microcontrollers, featuring basic power supplies and pull-up resistors but lacking USB connectivity, and were released under public domain licenses via Hack a Day articles.[7][8] The first USB-enabled version, v2go, launched in 2009 as a Hack a Day fundraiser, with approximately 1,000 units sold on black PCBs to support further development.[9] This marked the transition to broader accessibility, followed by the v3 series in late 2009, including v3a and v3b models based on the PIC24FJ64GA002 microcontroller for enhanced protocol support.[2] Subsequent v3 iterations, such as v3.5 in 2011 with a shrouded header for manufacturing efficiency and v3.6 in 2012 with cosmetic refinements, maintained the core PIC24 architecture while addressing production costs.[10][2] Development of the v4 version began experimentally around 2012, incorporating a larger PIC24FJ256GB106 microcontroller for expanded features, though initial batches in 2013 faced USB integration challenges and were limited to early adopters.[11][12] The v4 was eventually discontinued amid ongoing supply and performance issues, prompting a redesign toward ARM-based architectures.[12] The v5 redesign encountered significant delays from 2020 to 2023 due to global supply chain disruptions affecting component availability, particularly STM32 microcontrollers, leading to a pivot to the Raspberry Pi RP2040 and a relaunch in January 2024 with modern USB-C connectivity.[1][13] In 2024, variants including the v5XL and v6 were introduced, utilizing the RP2350 microcontroller for improved dual-core ARM and RISC-V processing capabilities, enhancing performance for advanced protocols.[14][15] As of early 2025, community discussions on the Bus Pirate forum have explored prototype ideas for a potential v7, including expanded I/O and firmware modularity, with initial REV0 prototypes discussed in February 2025.[16][17] The project is governed through the Dangerous Prototypes forum for discussions, GitHub repositories for code contributions, and key maintainers like Ian Lesnet and Sjaak (of SMDprutser), ensuring ongoing open-source evolution via collaborative firmware and hardware updates.[2][12][4]Hardware Design
Generations and Versions
The Bus Pirate has evolved through several hardware generations, each introducing improvements in processing power, memory, and interface capabilities while maintaining its core role as a universal bus interface tool. Early versions relied on Microchip PIC microcontrollers, offering reliable but limited performance for basic protocol interactions. Later iterations shifted to Raspberry Pi RP-series chips, enabling more advanced features like integrated displays and expanded storage to address modern debugging needs.| Version | Status | Microcontroller | Flash / SRAM | I/O Pins | USB Type | Notable Changes |
|---|---|---|---|---|---|---|
| v3.x | Mature | PIC24FJ64GA002 | 64 kB / 8 kB | 5 | Mini-USB (via FTDI) | Established baseline design with proven stability for essential bus protocols; widely used for introductory hardware hacking.[2][18] |
| v4.x | Experimental / Discontinued | PIC24FJ256GB106 | 256 kB / 16 kB | 7 | Mini-USB (integrated) | Increased memory and pins for enhanced protocol support; however, hardware remained unstable and was not pursued to full production.[11][18][2] |
| v5 | Active / Production | RP2040 (dual ARM Cortex-M0+ at 125 MHz) | 16 MB / 264 kB | 8 | USB-C | Introduced RP-series MCU for faster processing, added 320x240 IPS LCD for on-device status display, and 1 Gbit NAND storage for firmware persistence.[1][19] |
| v5XL | Active / Production | RP2350A (dual ARM Cortex-M33 at 133 MHz) | 16 MB / 520 kB | 8 | USB-C | Upgraded to secure ARM M33 cores with doubled RAM and 12 PIO state machines for improved performance in complex tasks.[14][20] |
| v6 | Active / Production | RP2350B (dual ARM Cortex-M33 at 133 MHz) | 16 MB / 520 kB | 8 (plus buffer) | USB-C | Retained v5XL memory and 12 PIO state machines with buffer improvements via extra pins for integrated logic analysis capabilities using 8 "look behind" pins.[1][21] |
Technical Specifications
The Bus Pirate features a microcontroller from the Raspberry Pi RP series, with recent versions utilizing the RP2040 or RP2350 chips, each equipped with dual-core ARM processors operating at 125-133 MHz.[23][21] The RP2040 provides 264 kB of SRAM, while the RP2350 offers 520 kB, supporting efficient handling of protocol operations and data buffering.[21] Memory includes 16 MB (128 Mbit) of external QSPI flash for firmware and 128 MB (1 Gbit, ~100 MB usable) of external NAND flash for storage, which appears as a USB drive for logs and settings.[26][21][1] The I/O system centers on 8 bidirectional pins tolerant to 1.2-5 V voltages through integrated Bulldozer buffers, enabling safe interfacing with diverse hardware levels in a tri-state configuration.[26][21] Each pin supports voltage measurement up to 5 V and includes toggleable 10 kΩ pull-up resistors for bus compatibility.[26] These pins connect via a 10-pin 2.54 mm main header and a 9-pin 1.0 mm auxiliary header, facilitating probing and expansion.[26] Power supply capabilities include a programmable output from 1-5 V, delivering up to 400 mA with adjustable current limiting (programmable 0-500 mA), overcurrent protection via a resettable digital fuse, and integrated current sensing for monitoring draw.[26][21] Connectivity relies on a USB-C port for both power and data communication over CDC serial, with the NAND flash enabling mass storage access.[26] Peripherals encompass a 320×240 pixel IPS LCD for displaying pin voltages, current, and status; 18 addressable RGB LEDs for visual feedback; and a single button for mode selection and bootloader entry.[26][21] Earlier versions differ notably: the v3 and v4 models employ a 16-bit PIC24 microcontroller (e.g., PIC24FJ64GA at 16 MHz for v3 or PIC24FJ256GB106 for v4) with limited memory (512 Kbit to 256 K program space and 8-16 K RAM), 5-7 I/O pins at 3.3 V tolerance, fixed 3.3/5 V power supplies without programmable output, basic LED indicators, and mini-USB connectivity without an LCD or NAND storage.[23][11] The v5 and later iterations introduce the enhanced features above, including higher current output and the IPS display.[26] The physical form factor for v5 and v6 is a compact 60×60 mm four-layer FR4 PCB, with open-source schematics available for all generations.[27][21]Software and Operation
Firmware
The Bus Pirate firmware is an open-source implementation written in C, utilizing the Raspberry Pi Pico SDK for compatibility with the RP2040 microcontroller in Bus Pirate 5, the RP2350A in Bus Pirate 5XL, and the RP2350 in Bus Pirate 6. It is community-maintained through the official GitHub repository at DangerousPrototypes/BusPirate5-firmware, which encompasses development for both chips and includes support for serial protocols such as I2C, SPI, UART, and 1-Wire. For older Bus Pirate v3 and v4 hardware, a separate community-maintained firmware series (v8.x, as of July 2025) is available in the buspirate/bus_pirate repository, ensuring continued compatibility with legacy devices.[28] Firmware versions are released as stable builds and auto-compiled bleeding-edge updates from the main branch, with the latest auto-build dated November 10, 2025. Builds can be compiled with optimization levels ranging from 0 (no optimization, prioritizing debuggability) to 3 (maximum speed and size reduction), allowing users to balance performance and resource usage during custom compilations. Installation for v5 and v6 models involves entering USB bootloader mode—activated by pressing the boot button or sending the '$' key via terminal—and dragging the .uf2 firmware file onto the appearing USB mass storage device. Legacy v3 and v4 models require external programmers like PICkit2 to flash .hex files, often using tools such as pk2cmd for the process. Core functionalities include seamless protocol mode switching via terminal commands, dynamic pin configuration for I/O operations (supporting 1.2-5V levels), real-time voltage reporting on connected pins, and a binary mode that enables scripted access for automated interactions. The firmware leverages the device's 1Gbit NAND flash storage (approximately 100MB usable) to persist user settings in JSON format across reboots and store custom scripts or files, which appear as a USB drive when mounted. It integrates with external tools such as AVRDUDE (version 5.8 and later for AVR programming), OpenOCD for JTAG debugging, and flashrom for SPI flash operations, all accessible through the legacy binary mode. Firmware updates for v5+ are straightforward via the drag-and-drop method, with migration guides from v3/v4 to newer hardware detailed in official documentation, including compatibility notes for protocol behaviors and pin mappings. The v8.x series specifically targets older hardware, providing bug fixes and protocol enhancements without requiring hardware changes.User Interface and Commands
The Bus Pirate primarily interfaces with users through a VT100-compatible serial terminal connected over USB, supporting applications such as PuTTY or minicom configured at 115200 baud, 8 data bits, no parity, and 1 stop bit.[29] This setup enables direct command input and real-time feedback, with the device presenting as a standard serial port (e.g., /dev/ttyUSB0 on Linux) upon connection.[30] The interface operates in several modes to facilitate safe and targeted interactions. The default HiZ (high-impedance) mode keeps all outputs disabled for initial setup and probing, preventing accidental damage to connected circuits.[30] Users can switch to protocol-specific modes or other configurations via the 'm' command (e.g., 'm' followed by mode selection), and a binary mode is available for automated scripting without the overhead of text-based parsing.[30] In binary mode, the device responds with compact, raw data packets, enabling efficient integration with external software.[31] Commands follow a simple, Linux-like structure using single-letter shortcuts for core functions, such as 'W' to enable the 1-Wire protocol or digits '0-9' for bit-banging operations on specific pins.[32] Optional parameters follow the command, separated by spaces, and execution occurs upon pressing Enter; for instance, 'W 3.3' activates 3.3V power output. Macros support bulk operations by loading predefined sequences from files (e.g., 'macro -f filename'), allowing users to automate repetitive tasks without manual re-entry.[30] Output includes real-time voltage reports on I/O pins, pin state displays in the terminal, and error handling such as alerts for pull-up resistor detection or syntax issues (e.g., "Syntax error, type ? for help").[29] In VT100 mode, a live status bar provides color-coded updates on device status, enhancing readability during operation.[33] For Bus Pirate v5 and later versions, an integrated LCD screen displays pin labels (e.g., IO0-IO7), measured voltages (1.2-5V range), and current draw from the programmable power supply (up to 400mA).[33] The LCD features a color-coded status bar for quick visual feedback on modes and errors, complementing the terminal output.[33] Scripting leverages binary mode through libraries like libbuspirate, a C library that communicates in raw mode for automation in languages such as Python via wrappers.[34] Example scripts can read pin voltages or execute macros programmatically, streamlining tasks like batch testing.[34] Keyboard input supports direct terminal control with arrow keys for command history navigation, backspace/delete for editing, and Enter for execution.[29] A physical button on v5 models serves for escaping locked modes or entering bootloader mode when held during USB connection, while the '$' key in the terminal also triggers bootloader access for firmware updates.[33]Applications and Uses
Supported Protocols
The Bus Pirate supports a range of serial communication protocols, enabling it to interface with various electronic components and buses as a versatile debugging tool. Core protocols include I²C, SPI, UART, and 1-Wire, each configurable for speed, voltage levels, and operational modes to suit different applications. These applications extend to the Bus Pirate 6, released in 2024, with comparable capabilities.[30][33][35] In I²C mode, the Bus Pirate operates primarily as a master device over a two-wire bus (SDA for data and SCL for clock), supporting speeds from 1 kHz to 1 MHz (default 400 kHz) with 8-bit or 10-bit addressing. It requires external or onboard pull-up resistors (2 kΩ to 10 kΩ) on both lines due to its open-drain output configuration, and features like clock stretching can be enabled for compatibility with slower peripherals. The maximum voltage is 5 V, limiting it to low-voltage systems.[36][30] SPI mode allows synchronous master communication using four wires (MOSI for master-out-slave-in, MISO for master-in-slave-out, CLK for clock, and CS for chip select), with support for modes 0 through 3 via configurable clock polarity and phase. Speeds range from 1 kHz to 62.5 MHz (default 100 kHz), and data width is adjustable from 4 to 8 bits; CS can be toggled actively high or low for multiple devices. Output is push-pull at 1.65 V to 5 V.[37][30] UART provides asynchronous serial communication with configurable baud rates from 1200 to 115200 (default 115200), supporting 5 to 8 data bits, optional parity (none, even, or odd), and 1 or 2 stop bits. Connections use TX and RX lines plus ground, with push-pull output up to 5 V; it also accommodates MIDI at a fixed 31250 bps for musical device interfacing.[38][30] The 1-Wire protocol enables single-wire, low-speed communication for devices like temperature sensors, supporting search, read, and write operations via an open-drain bus on the OWD pin. Pull-up resistors (2 kΩ to 10 kΩ) are required, and the maximum voltage is 5 V.[39][30] Additional modes include JTAG for boundary scan and debugging, integrated with OpenOCD for supported targets, though performance is limited for high-speed use. MIDI leverages the UART for specialized serial applications, while bit-bang (DIO) mode offers general-purpose I/O for custom timings or non-standard protocols via configurable pin states and frequency generation up to 40 MHz. A logic analyzer mode using the SUMP protocol captures signals on multiple pins for analysis.[2][30][40] Configuration options across protocols include enabling pull-up resistors (via theP command), adjusting peripheral power supply (1 V to 5 V, up to 400 mA with current limit up to 500 mA in v5), and setting voltage levels for I/O pins (1.2 V to 5 V). In Bus Pirate v5 and later, enhancements provide higher SPI speeds (up to 62.5 MHz), improved buffering for reliable high-speed operation, and expanded modes like WS2812/APA102 for LED control, building on v3's basic support for core protocols. However, it lacks native support for protocols like CAN or Ethernet, relying on bit-banging for such custom implementations, and all operations are constrained to 5 V maximum.[23][41][2][42]