Fact-checked by Grok 2 weeks ago

Microplasma

Microplasma refers to a class of low-temperature, non-equilibrium plasma discharges confined to microscale dimensions, where at least one characteristic length is on the order of 1 mm or smaller, enabling high electron densities up to 10¹⁷ cm⁻³ and stable operation even at atmospheric pressures.^[1] These discharges are typically generated as weakly ionized gases between electrodes in small bores or cavities, often 10–500 μm in diameter, and exhibit a multi-temperature environment where electron temperatures exceed 10,000 K while gas temperatures remain below 2,000 K.^[2]^[3] The field of microplasma research emerged in the mid-1990s, building on decades of low-temperature plasma applications in microelectronics, with publication volume growing from fewer than 20 papers in 1995 to over 150 annually by 2014, reflecting its transition into a distinct area of plasma science.^[1] Generation methods include direct current (DC), alternating current (AC), radio frequency (RF), microwave, or pulsed excitation, often using noble gases like argon or helium in configurations such as microcavities, flow-through reactors, or liquid-phase setups to produce stable glow discharges resistant to arcing.^[3]^[4] Key properties include exceptionally high power densities exceeding 10⁵ W/cm³, strong spatial gradients, and collision-dominated dynamics that foster reactive species formation, excimer production, and enhanced plasma-surface interactions due to the high surface-to-volume ratio.^[1]^[2] Microplasmas have found diverse applications leveraging their nonequilibrium conditions and scalability, including the synthesis of nanomaterials such as metal, semiconductor, and oxide nanoparticles for optoelectronics and electromagnetic metamaterials.^[3] In environmental and biomedical fields, they enable water purification, gas remediation, photocatalysis, and cancer therapy through selective generation of reactive species for surface sterilization and biological inactivation.^[2] Additional uses encompass ultraviolet (UV) and vacuum ultraviolet (VUV) light sources like excimer lamps, microdevice fabrication via localized deposition, and micropropulsion systems for nanosatellites.^[1]^[4]

Fundamentals

Definition and Characteristics

A microplasma is defined as a nonequilibrium plasma confined to small dimensions, typically ranging from 10 to 1000 micrometers, and operating at pressures between 0.1 and 760 Torr.^[2]^[5] These plasmas are characterized by a significant disparity between electron temperature (often several eV) and gas temperature, which remains low, typically ranging from near room temperature to 300–500 K (up to ~200–300°C in some configurations), enabling applications sensitive to thermal effects.^[6]^[3] Key features include high electron densities on the order of $10^{11}–$10^{16} cm^{-3} (with values up to $10^{17} cm^{-3} in pulsed regimes), which support efficient ionization and reactive species generation.^[7]^[8]^[1] The confined scale of microplasmas results in a high surface-to-volume ratio, which enhances plasma-wall interactions, promotes greater reactivity, and alters the energy balance compared to larger systems.^[9]^[10] This geometry facilitates the production of short-lived species and metastable states that are crucial for chemical processing.^[2] In contrast to macroplasmas, which often require low pressures for stability due to longer Debye lengths relative to their size, microplasmas maintain quasineutrality because their dimensions are much larger than the Debye length even at elevated pressures, preventing arcing and enabling stable operation up to atmospheric levels.^[11]^[12] This stability arises from the condition that the Debye length \lambda_D must be significantly smaller than the plasma size for collective behavior to dominate.^[11] Microplasma ignition follows Paschen's law, where the breakdown voltage V_b is a function of the product pd (pressure p times gap distance d), with efficient operation occurring near the minimum of the Paschen curve.^[13]^[14] At microscale gaps, this minimum allows low-voltage breakdown at higher pressures, distinguishing microplasmas from conventional discharges.^[13]^[15]

Physical Properties

Microplasmas exhibit electron densities typically ranging from $10^{11} to $10^{16} cm^{-3} (up to $10^{17} cm^{-3} in pulsed regimes), with ion densities of comparable magnitude due to quasineutrality in the plasma bulk.^[6]^[1] These values are often higher in steady-state discharges, reaching up to $10^{15}–$10^{16} cm^{-3} in argon at atmospheric pressure, enabling efficient ionization and reactive species generation. In steady-state discharges, densities typically reach up to 10^{15}–10^{16} cm^{-3}, while pulsed excitations can achieve over 10^{17} cm^{-3}.^[7] Measurements of these densities are commonly performed using Langmuir probes in low-pressure regimes, where probe current-voltage sweeps yield electron density via the electron saturation current, or optical emission spectroscopy (OES) in higher-pressure microplasmas, which infers density from line intensity ratios assuming local thermodynamic equilibrium approximations.^[16] A defining feature of microplasmas is their nonequilibrium nature, characterized by electron temperatures of 1–10 eV (approximately 11,600–116,000 K) contrasted against gas temperatures of 300–500 K, allowing high chemical reactivity without excessive thermal damage to substrates.^[9] This disparity arises from the low collision frequency for electrons compared to heavy particles, with electrons gaining energy from the electric field while inefficiently transferring it to the gas via collisions.^[17] Electron temperatures are derived from OES via Boltzmann plots of excited state populations, while gas temperatures are estimated from rotational line broadening in molecular spectra, such as N_2 second positive system.^[18] Stability in microplasmas is influenced by their high surface-to-volume ratio, which enhances wall interactions and can lead to enhanced electron loss or secondary emission, potentially destabilizing the discharge but also enabling operation at high pressures through geometric field enhancement at microscale electrodes.^[3] The accumulation of long-lived metastable species, such as Ar $1s_5 states with lifetimes exceeding 10 \mus, further contributes to stability by facilitating stepwise ionization and sustaining the plasma column against contraction or filamentation. Optically, microplasmas produce characteristic emission spectra dominated by atomic and molecular lines, including excimer formation such as Xe_2^* emitting at 172 nm in the vacuum ultraviolet, which results from three-body collisions of excited xenon atoms and is useful for photochemical applications.^[19] Electrically, their current-voltage characteristics reveal glow discharge behavior with a distinct negative glow region, often exhibiting a pressure-independent point where current remains constant across pressures, reflecting the balance between ionization and attachment processes in the microscale geometry.^[20]

Generation Methods

Confinement Techniques

Confinement techniques for microplasmas primarily rely on geometric and electrode-based methods to spatially limit the plasma to microscale volumes, typically 50–500 μm in dimension, enabling stable operation at elevated pressures without significant expansion.^[1] Geometric confinement achieves this through structures such as microcavities, capillaries, or arrays that exploit high surface-to-volume ratios to enhance electron density and prevent radial diffusion. For instance, microcavities with diameters of 75–750 μm allow stable glow discharges at pressures up to 1 atm by confining the plasma within dielectric or metallic enclosures.^[1] Capillaries, often 0.01–1 mm in diameter, further restrict plasma to linear paths, as seen in capillary plasma electrode discharges that produce focused jets at atmospheric pressure.^[1] Arrays of such structures, like microchannel arrays with 70 μm gaps, enable parallel operation for uniform plasma distribution across larger areas while maintaining individual confinement.^[1] Electrode configurations are designed to minimize the product of pressure and electrode gap distance (pd) near the Paschen minimum, typically around 1 Torr·cm, to sustain non-thermal glow discharges in reduced volumes. Parallel-plate setups with gaps as small as 0.1 mm promote stability but require precise control to avoid arcing.^[1] Coaxial configurations, such as those with ring anodes surrounding a central cathode, confine plasma along the axis and exhibit a positive voltage-current characteristic for high-pressure operation.^[1] Needle-to-plane arrangements, often with recessed pin electrodes, facilitate asymmetric fields that direct plasma into confined regions like capillaries.^[21] These setups operate at pd values of 0.03–10 Torr·cm, with deviations from classical Paschen behavior occurring in gaps below 10 μm due to enhanced field emission.^[1] Key challenges in these techniques include heat dissipation from high power densities exceeding 10^5 W/cm³ and electrode erosion, which can degrade performance over time. Heat management benefits from the inherent high surface-to-volume ratios in microscale geometries, keeping gas temperatures between 325 K and 1300 K, though active cooling or short pulsing (under 1 μs) is often necessary to prevent thermal runaway.^[1] Electrode erosion, particularly in silicon or metallic cathodes, is mitigated through passivation layers such as 2–6 μm thick Si₃N₄ or SiO₂ coatings, which extend device lifetimes by reducing ablation and redeposition.^[21] Prominent examples include hollow cathode discharges, where plasma is confined within 200 μm cavities at 100–350 Torr, leveraging pendulum-like electron motion for enhanced ionization efficiency, as pioneered in seminal work on microhollow cathode discharges.^[1] Microchannel arrays, such as 32×32 configurations with 50–150 μm holes, provide uniform plasma over 1024 sites, suitable for scalable applications while addressing ignition dynamics through geometric patterning.^[21]

Dielectric Barrier and Pulsed Excitation

Dielectric barrier discharge (DBD) serves as a primary non-thermal excitation technique for sustaining stable microplasmas at atmospheric pressure, utilizing insulating layers to limit current flow and avert transition to arcing or spark discharges.^[22] Common dielectric materials include quartz and alumina, which provide high breakdown strength and thermal stability while enabling uniform plasma distribution across small gaps (typically 10–100 μm).^[23] These setups operate at AC frequencies of 1–50 kHz and voltages of 1–10 kV, producing filamentary or diffuse discharges that maintain non-equilibrium conditions with electron temperatures exceeding 10,000 K while keeping gas temperatures below 500 K.^[22] Pulsed power excitation enhances DBD microplasma performance by delivering short-duration high-voltage pulses, typically 10–100 ns at 1–10 kV, which yield instantaneous power densities up to 5 × 10^8 W/cm³ and minimize electrode erosion through reduced sputtering.^[24] This approach promotes filament suppression and fosters a more uniform plasma volume by controlling streamer propagation, often integrating with geometric confinement for enhanced stability in microscale channels.^[25] Energy efficiency can exceed 90% in optimized configurations, such as those employing repetitive nanosecond pulsing, surpassing continuous AC methods by factors of up to 10.^[25] A representative application involves atmospheric-pressure DBD microplasmas for volatile organic compound (VOC) treatment, where perforated electrodes and a 30 μm gap at 27 kHz and ~550 V peak reduce hexadecane concentrations from 3000 ppm to 150 ppm within 120 minutes, demonstrating effective pollutant decomposition with low power consumption (~1 W).^[22]

RF, Microwave, and Laser Methods

Radio frequency (RF) excitation is a prominent method for generating stable microplasmas at atmospheric pressures, typically employing frequencies such as 13.56 MHz through capacitive or inductive coupling to sustain discharges in noble gases like argon. In capacitive configurations, RF power is applied between electrodes with gaps on the order of 200 μm, achieving near-atmospheric operation (e.g., 89 kPa) using voltages of 50–230 V to produce filamentary or diffuse modes in Ar or Ar-air mixtures. Inductive coupling at similar frequencies enhances plasma uniformity by inducing currents via magnetic fields, enabling jet-like discharges suitable for localized treatment. Power levels in the range of 1–100 W are commonly used to maintain stable RF microplasma jets, balancing electron density (around 10^{14}–10^{15} cm^{-3}) and gas temperature below 500 K for non-thermal operation.^[26]^[27]^[28] At higher frequencies, such as 2.45 GHz, RF transitions into microwave regimes, where inductive coupling via microstrip or coaxial structures supports compact atmospheric microplasma sources with efficiencies exceeding 85% in oxygen and around 30% in argon. Microwave methods, including surface wave discharges, propagate electromagnetic waves along dielectric interfaces to sustain plasma columns, allowing remote generation over scales up to several centimeters without direct electrode contact. Cavity-based discharges at 2.45 GHz confine the plasma within resonant structures like evanescent-mode cavities, facilitating low-power (tens of watts) operation for precise control of plasma volume and enabling applications in spectroscopy and material modification. These techniques contrast with lower-frequency RF by reducing sheath thicknesses and promoting higher electron densities (up to 10^{16} cm^{-3}) due to enhanced power coupling at atmospheric pressure.^[29]^[30]^[31] Laser-induced microplasmas form through optical breakdown, where femtosecond to nanosecond pulses from Ti:sapphire lasers (e.g., 800 nm wavelength, 80–130 fs duration) focus intense fields to initiate multiphoton ionization, rapidly escalating to avalanche ionization and plasma densities exceeding 10^{18} cm^{-3} in gases like air. At atmospheric pressure, nanosecond pulses (e.g., KrF excimer at 248 nm) produce microscale breakdowns with thresholds around 10^{12}–10^{14} W/cm^2, while femtosecond pulses lower these to 10^{11} W/cm^2 by minimizing thermal diffusion, enabling sub-micron plasma spots for spectroscopy or ablation. The process begins with nonlinear absorption creating seed electrons, followed by inverse bremsstrahlung heating, and is pressure-dependent, with emission intensities peaking near 100–760 Torr due to optimal collisionality.^[32]^[33]^[34] Recent adaptations of atmospheric-pressure RF microplasma jets incorporate He/O_2 mixtures to modulate electronegativity, controlling negative ion densities and transition between ohmic and gamma modes for tailored reactive species production. In capacitively coupled setups at 13.56 MHz, adding 1–5% O_2 to He reduces electron temperature while enhancing atomic oxygen flux, improving stability and uniformity over pure He discharges. These mixtures leverage O_2 attachment to electrons for electronegative control, with fluid models showing mode transitions at specific admixture ratios, often synergizing briefly with pulsed power to extend jet length without filamentation.^[35]

Historical Development

Origins and Early Experiments

The origins of microplasma research trace back to mid-19th-century experiments with electrical discharges in confined gases, which demonstrated phenomena akin to modern microdischarges. In 1857, German inventor Werner von Siemens constructed an ozone generation device using a silent electrical discharge in small glass tubes, where electrodes were placed outside the discharge chamber to avoid direct contact with the plasma, enabling stable operation at atmospheric pressure. This apparatus, often regarded as an early precursor to dielectric barrier microdischarges, highlighted the potential for non-thermal plasmas in narrow geometries for chemical production.^[36] During the late 19th century, scientists began systematically observing glow discharges in narrow glass tubes under reduced pressures, revealing intricate plasma behaviors. Johann Hittorf, in 1869, used partially evacuated tubes to study cathode rays and the luminous patterns of gas discharges, noting how the glow stratified along the tube length. Building on this, William Crookes in the 1870s developed the Crookes-Hittorf tube, a refined low-pressure discharge device that showcased dark spaces and glowing regions, providing foundational insights into electron streams and ionization in confined spaces. These experiments established the visual and electrical signatures of microscale-like plasmas in small tubes.^[37] A pivotal theoretical advancement came in 1889 with Friedrich Paschen's investigations into gas breakdown, where he identified that the minimum voltage required for discharge depends critically on the product of gas pressure and electrode gap distance. Known as Paschen's curve, this relationship underscored how smaller gaps—central to microplasmas—could sustain discharges at higher pressures than larger systems, influencing designs for compact plasma sources. Paschen's work provided the key insight into pressure-distance scaling effects, enabling predictions for stable operation in microscopic regimes.^[38] In the early 20th century, practical applications emerged with the invention of neon signs by Georges Claude in 1910, which employed small-scale glow discharges in sealed neon-filled tubes to produce vibrant illumination at atmospheric pressure. These devices exemplified controlled microdischarges for visual effects. Concurrently, during the 1920s, researchers utilized similar small-scale gas discharges for spectroscopy, analyzing emission spectra from noble gas plasmas to probe atomic structures and early dimer-like excitations, advancing understanding of plasma-light interactions in confined volumes.

Mid-20th Century Advancements

Following World War II, microplasma research advanced significantly through military and industrial applications, particularly in the development of compact ion sources for mass spectrometry and ultraviolet (UV) lamps for photochemical processes. In the 1940s and 1950s, small-scale discharges were explored for efficient ionization in analytical instruments, leveraging their high electron densities for precise ion generation without requiring large vacuum systems. These ion sources found use in early radar and propulsion technologies, where stability was critical to prevent arcing. Concurrently, UV lamps based on microdischarges emerged for industrial sterilization and lighting, offering compact alternatives to larger arc lamps. Key theoretical contributions came from researchers like Gordon Francis and A. von Engel, who investigated the stability of glow discharges in the 1950s, analyzing factors such as electron oscillations and space charge effects to ensure reliable operation in confined geometries. Their work on electrodeless discharges highlighted mechanisms for maintaining uniform microdischarge channels, preventing instability in low-pressure environments.^[39] By the 1960s, these advancements paved the way for practical devices, including early prototypes of flat-panel displays using microdischarge arrays. In 1964, Donald L. Bitzer and H. Gene Slottow at the University of Illinois invented the plasma display panel (PDP), an array of bistable gaseous discharge cells filled with neon or xenon gas, where each cell operated as an independent microdischarge to produce visible light via UV excitation of phosphors. Initial prototypes featured 4x4 pixel arrays by 1966, scaling to 128x128 pixels by 1968, demonstrating the feasibility of large-scale microdischarge matrices for graphics and memory applications without bulky cathode-ray tubes. This marked a shift toward arrayed microplasmas for efficient, flat illumination. Early ozone generation experiments also benefited from these stable microdischarges, building on prior macro-scale work for water treatment.^[40] In the 1970s, Ulrich Kogelschatz advanced dielectric barrier discharge (DBD) techniques at ABB, focusing on excimer formation for UV generation in compact lamps. His experiments demonstrated that silent discharges—comprising transient microdischarges confined by dielectric layers—could efficiently excite rare gas excimers, producing high-intensity UV radiation at wavelengths like 172 nm (Xe2*) and 308 nm (XeCl*), with quantum efficiencies exceeding 10%. This realized the potential of microplasmas for scalable UV sources, outperforming traditional mercury lamps in photochemical efficiency. A seminal 1976 publication by Kogelschatz detailed the physics of silent discharges, including microdischarge dynamics and energy transfer, emphasizing their role in ozonizers and emerging excimer applications. These efforts highlighted early microdischarge arrays beyond displays, such as for prototype flat-panel UV emitters.^[41]^[42] Overall, mid-20th century progress transitioned microplasma technology from macro-scale discharges to confined, arrayed systems, enhancing efficiency in lighting through reduced power losses and in chemical processing via localized high-energy densities. This scaling enabled non-equilibrium conditions ideal for selective excitation, setting the stage for broader industrial adoption while minimizing electrode erosion and thermal issues.^[41]

Late 20th Century to Present

In the 1980s and 1990s, microplasma technology advanced significantly through the development of plasma display panels (PDPs), which utilized microscale plasma discharges in arrays to create high-resolution flat-panel televisions. Pioneers such as Larry F. Weber contributed key innovations, including improvements in electrode structures and gas mixtures that enhanced luminous efficiency and reduced power consumption, enabling the transition from laboratory prototypes to commercial products like large-screen TVs by the mid-1990s.^[43] These microplasma arrays demonstrated the scalability of confined discharges for practical display applications, building on earlier mid-20th-century foundations. The 2000s marked a surge in organized research collaboration, highlighted by the First International Workshop on Microplasmas held in 2003 in Hyogo, Japan, organized by Kunihide Tachibana, which focused on the emerging potential of microplasmas in non-thermal applications and spurred global interest. Concurrently, researchers Karl H. Schoenbach and J. Gary Eden advanced microcavity plasma arrays, developing scalable structures that operated efficiently at atmospheric pressure for compact lighting sources, with prototypes achieving uniform emission over large areas. Their work emphasized electrode designs that minimized instability, paving the way for energy-efficient alternatives to traditional lamps. From the 2010s to the 2020s, microplasma research expanded into atmospheric-pressure microjets, which enabled portable, non-equilibrium discharges for precise material interactions without vacuum requirements, as demonstrated in studies optimizing jet stability and species generation for targeted applications.^[44] Workshops on microplasmas have increasingly addressed biomedical uses in recent years, with events like the International Workshop series incorporating sessions on plasma-biomaterial interfaces and reactive species delivery, reflecting a shift toward health-related integrations through 2025. A notable 2025 milestone involved integrating graphene with nanodiamonds in electrode designs, enhancing device stability by over 140%—from 718 seconds to 1770 seconds of continuous operation—due to improved thermal management and discharge uniformity.^[45] In 2025, further advances included microplasma synthesis of magnetic carbon hybrids and citrus-derived carbon quantum dots for nanomaterial applications.^[46]^[47] Key commercialization milestones included the 2010 launch of microplasma lamps by Eden Park Illumination, founded by J. Gary Eden, which produced scalable arrays for ultraviolet and visible lighting with efficiencies rivaling mercury lamps while avoiding hazardous materials.^[48] Ongoing efforts, such as France's Agence Nationale de la Recherche (ANR) projects like SPECTRON (2023–present), continue to refine nanosecond-pulsed microplasma sources for high-repetition-rate generation of atomic species, supporting advancements in precision plasma control.^[49]

Established Applications

Displays and Illumination

Microplasma technology has been instrumental in the development of plasma display panels (PDPs), which utilize millions of microscopic discharges per panel to produce high-definition images. Each pixel in a PDP consists of three subpixels for red, green, and blue emission, with individual microdischarges typically measuring 100–500 μm in diameter, such as the 360 μm width observed in typical high-definition cells. These discharges are sustained in neon-xenon (Ne/Xe) gas mixtures, often Ne with 4% Xe at pressures around 500–600 Torr, where xenon provides efficient vacuum ultraviolet (VUV) emission that excites phosphors to generate RGB colors. PDPs reached their commercial peak in the 2000s as a leading technology for large-screen HDTVs, with widespread adoption in sizes up to 60 inches due to their superior viewing angles and motion handling compared to early LCDs.^[50]^[51]^[52] Beyond displays, microplasma serves as an efficient source for general illumination through microcavity arrays, such as those developed by Eden Park Illumination, which form flat, lightweight panels capable of producing uniform visible light. These arrays operate via dielectric barrier discharges in microcavities, emitting broad UV-Vis spectra that can be tailored for lighting applications, including phosphor-converted white light for ambient environments. Devices such as microcavity array panels exemplify this approach, achieving lifetimes exceeding 50,000 hours through electrode encapsulation that minimizes sputtering and degradation. Efficiencies in these systems range from 15–30 lm/W in current prototypes, with projections up to 40 lm/W upon optimization of cavity geometry and phosphor integration.^[53]^[54]^[55] Microplasma illumination offers advantages in color rendering over LEDs for specific wavelengths, achieving color rendering indices (CRI) above 90 due to their continuous, full-spectrum output that more closely mimics natural light, enhancing visual comfort in applications like museums or medical settings. However, the PDP market for consumer displays declined sharply after 2010, supplanted by OLEDs offering higher efficiency and thinner profiles, leading to the last major PDP production in 2013. Microplasma arrays endure in niche roles, particularly as compact UV lamps for sterilization and spectroscopy, where their high radiance and spectral tunability provide irreplaceable benefits.^[48]^[52]^[56]

Environmental Remediation

Microplasmas offer a compact and energy-efficient approach to environmental remediation by generating reactive oxygen and nitrogen species that break down persistent pollutants in air and water systems. These non-thermal plasmas, operating at atmospheric or near-atmospheric pressures, produce high concentrations of radicals and ions in small volumes, enabling targeted treatment without significant thermal damage to surrounding media. Applications focus on oxidizing volatile organic compounds (VOCs), nitrogen oxides (NOx), and sulfur oxides (SOx) in exhaust gases, as well as organic contaminants in wastewater. In VOC destruction, microplasmas demonstrate high removal efficiencies of 95–100% for low-concentration inputs (1–10 ppm), primarily through the action of hydroxyl (OH) and atomic oxygen (O) radicals generated in air plasmas. These radicals initiate chain reactions that mineralize hydrocarbons into CO₂ and H₂O, with processes showing near-complete conversion under optimized conditions such as dielectric barrier discharges. The energy requirement remains low, typically on the order of a few joules per liter of treated gas, making it viable for indoor and industrial air purification. Ozone is occasionally produced as a byproduct, contributing to supplementary oxidation.^[5]^[57] For NOx and SOx reduction, microplasma technologies integrate with selective catalytic reduction (SCR) systems to convert these emissions into less harmful nitrogen and sulfur compounds. Dielectric barrier microplasma reactors, using perforated electrodes with gaps of 0–10 μm, achieve NOx removal rates up to 72% at elevated temperatures (e.g., 200–250°C) and AC excitation (1.2 kV, 25 kHz), with efficiencies enhanced by controlling oxygen content in the feed gas. Pilot-scale implementations emerged in the 2000s, scaling microplasma arrays for boiler and engine exhaust treatment, where plasma activation pre-treats gases to boost SCR performance and handle simultaneous NOx/SOx loads.^[58]^[59] Microplasma also advances wastewater treatment by combining with photocatalysis and inducing cavitation for superior pollutant oxidation. In hybrid setups, microplasma synthesizes TiO₂-Au nanoparticles that enhance photocatalytic degradation of organics under UV or visible light, improving quantum yields for refractory compounds like dyes. Cavitation effects, generated by plasma-induced bubble dynamics in microreactors, amplify reactive species delivery and mass transfer, achieving up to 90% degradation of methylene blue via intensified hydroxyl radical attacks. Underwater microplasma bubbles exemplify this, yielding energy efficiencies of 13–22 g/kWh for mixed dye pollutants through oxidative radical mechanisms.^[60]^[61]^[62] Scalability to industrial levels employs array configurations of parallel microplasma jets or electrodes, enabling high-throughput treatment of exhaust streams while maintaining uniform reactive species distribution. These arrays, with up to thousands of units, support continuous operation for large-volume gas flows. Recent 2024 investigations using He/O₂ microplasma jets confirm their efficacy in targeted water remediation, where atomic oxygen drives micropollutant degradation with minimal byproduct formation, paving the way for deployable systems in contaminated site cleanup.^[63]^[64]

Sensors and Ozone Generation

Microplasmas serve as compact excitation sources in environmental sensors, leveraging optical emission spectroscopy (OES) to detect trace gases through characteristic spectral lines. For instance, portable microplasma OES systems integrated with purge-and-trap preconcentration enable online discriminative detection of nitrogen oxides (NOx), including NO2 at parts-per-billion (ppb) levels, by analyzing emission intensities from molecular bands such as the β-system of NO around 200-300 nm.^[65] These devices offer high sensitivity and selectivity for ambient air monitoring, with detection limits reaching low ppb for pollutants like NO2 due to the high electron density and temperature in microdischarges that enhance atomic and molecular excitation.^[66] Integration of microplasmas with portable mass spectrometry further advances gas detection capabilities, particularly for volatile organic compounds (VOCs) and inorganic gases. Microplasma ionization sources, such as microhollow cathode discharges, provide soft ionization for direct sampling of air or water matrices, improving limits of detection to sub-ppb levels by minimizing fragmentation and enabling coupling with miniaturized mass analyzers like time-of-flight systems.^[67] This configuration supports field-deployable units for real-time analysis of environmental samples, reducing the need for extensive sample preparation compared to traditional laboratory methods.^[68] In ozone generation, dielectric barrier discharge (DBD) microplasmas fed with air produce O3 efficiently due to their high surface-to-volume ratio and non-thermal conditions that favor O atom recombination. Yields of up to 10-50 g/h have been achieved in compact air-fed DBD microplasma reactors operating at atmospheric pressure, with energy efficiencies around 20-60 g/kWh depending on power input and flow rates.^[69] Ozone concentration is typically monitored via UV absorption spectroscopy at 254 nm, where the strong Herzberg band allows precise quantification in the 10-100 g/m³ range using Beer-Lambert law principles.^[70] Microplasma-generated ozone reactors enable effective water purification through advanced oxidation, serving as a low-energy alternative to conventional UV lamps for disinfection. These systems dissolve O3 into water via bubbling or direct plasma-water interaction, achieving 99.9% inactivation of bacteria such as Escherichia coli within minutes at doses of 1-5 mg/L, owing to ozone's strong oxidizing potential that disrupts microbial cell walls and DNA.^[71] With power consumption below 10 W for portable units, microplasma ozonation reduces energy use by up to 50% compared to UV systems while maintaining residual disinfection effects.^[72] Miniaturization of microplasma devices has enabled handheld sensors since the 2010s, facilitated by advances in microfabrication techniques like MEMS integration for electrode arrays and compact power supplies. Early prototypes in the mid-2010s demonstrated battery-operated OES units weighing under 1 kg for on-site metal and gas analysis, paving the way for field applications in environmental monitoring.^[73] By 2025, RF-driven microplasma sensors have emerged for real-time VOC monitoring, incorporating 13.56 MHz excitation to sustain stable discharges in arrays, achieving sub-ppm detection with machine learning for pattern recognition in complex mixtures.^[74] These advancements synergize with broader environmental remediation efforts by providing inline sensing for process optimization.^[75]

Emerging Applications

Materials Processing and Nanomaterials

Microplasmas enable the synthesis of nanomaterials through plasma-enhanced chemical vapor deposition (PECVD) processes, which activate precursors at lower temperatures and often under atmospheric conditions, facilitating the growth of structures like carbon nanotubes (CNTs) and graphene. In atmospheric-pressure microwave plasma torches—a compact microplasma configuration—multi-walled CNTs are produced using ferrocene as a catalyst precursor mixed with acetylene, achieving aligned growth on substrates without requiring vacuum systems.^[76] Similarly, microwave plasma-enhanced CVD supports the direct synthesis of few-layer graphene on nickel substrates from methane, yielding freestanding sheets with controlled thickness via plasma-induced carbon activation.^[77] Recent innovations include graphene-nanodiamond hybrids for robust electrodes, where nanodiamonds (10–20 nm) decorate laser-induced graphene via drop-casting, enhancing microplasma device stability with lifetimes up to 1770 seconds and current densities of 1.6 mA/cm² under argon discharge.^[45] Boron-doped diamond nanowalls, synthesized by microwave PECVD at 700°C, further hybridize with laser-induced graphene to form cathodes exhibiting field enhancement factors of 5480 and plasma current densities of 9.48 mA/cm².^[78] Thin film deposition via microsputtering with argon microplasmas allows precise, room-temperature patterning of metals and semiconductors, supporting additive manufacturing of electronics. These systems generate nanoparticle fluxes for direct writing, achieving deposition rates of approximately 1 nm/s (60 nm/min) for gold films up to 100 nm thick, with near-bulk resistivity (2.9 µΩ·cm) and strong adhesion on diverse substrates.^[79] Rates typically range from 1–10 nm/min depending on power and gas flow, enabling scalable deposition of conductive metals like copper and silver, as well as semiconductor layers for microdevices. Surface modification using microplasmas involves etching and functionalization to tailor properties at the nanoscale. For instance, argon microplasma irradiation on brass induces morphological and structural changes, such as increased surface roughness and defect formation, which enhance field emission performance by lowering turn-on fields and boosting emission currents, as shown in 2025 investigations.^[80] In situ techniques have advanced with 2024 developments integrating DC microplasmas into scanning electron microscopes, permitting real-time imaging of growth dynamics, localized sputtering, and oxidation during nanomaterial formation under controlled gas mixtures and voltages.^[81] These hybrids also find brief application in fuel cell electrodes for improved durability.

Energy Systems and Fuel Cells

Microplasmas have been integrated into fuel cell technologies primarily through catalytic reforming processes that generate hydrogen from hydrocarbons or alcohols at small scales, enabling compact and efficient power sources for portable applications. In particular, non-thermal microplasma reactors facilitate the reforming of fuels like methanol and JP-8 to produce hydrogen-rich syngas suitable for solid oxide fuel cells (SOFCs), operating at atmospheric pressure and room temperature without requiring high thermal inputs typical of conventional reformers.^[82]^[83] These systems achieve high conversion rates, with microhollow cathode discharges demonstrating near 100% methanol conversion in experimental setups, producing hydrogen yields that support fuel cell operation with minimal byproducts like CO.^[84] The incorporation of catalysts, such as nickel-based electrodes, further enhances efficiency in plasma-assisted methanol steam reforming.^[85] Nanomaterial electrodes, such as those incorporating MXene membranes, have been briefly explored to further refine gas separation and purity in these setups. In plasma-assisted combustion, microplasmas enhance ignition in micro-engines by generating reactive species that lower activation energies, particularly useful for lean-burn operations in small-scale propulsion systems. Nanosecond pulsed discharges create non-equilibrium plasmas that accelerate flame kernel development, extending the lean-burn limit from an equivalence ratio of 0.6 to lower values, thereby improving fuel efficiency and reducing emissions in internal combustion engines.^[86]^[87] These pulses, typically in the range of 10 kHz repetition rates, enable reliable ignition under conditions where conventional sparks fail, supporting applications in micro-turbines and hybrid engines.^[88] Microplasma arrays also contribute to energy harvesting by converting waste heat through thermionic emission, where low-temperature plasmas facilitate electron emission from heated surfaces to generate electricity directly. In these configurations, arrays of microdischarges maintain stable operation at temperatures below 1000 K, harvesting thermal energy from industrial exhausts or portable devices with potential efficiencies tied to the work function of emitter materials.^[89] This approach offers a pathway for recovering low-grade heat that traditional thermoelectric systems overlook. Recent developments in 2024 have explored pulsed plasmas for generating atomic nitrogen, aiding sustainable fuel synthesis such as ammonia production via nitrogen fixation, which can serve as a carbon-free energy carrier. These pulsed systems, often using nanosecond excitations in dielectric barrier discharges, achieve higher energy efficiencies in NOx or NH₃ formation compared to continuous modes, with specific energy consumptions reduced by optimizing pulse parameters like duty cycle and risetime. The compact nature of microplasmas supports scalability to portable devices, enabling on-site fuel generation for fuel cells or combustion systems without large infrastructure.

Cosmetics and Surface Treatments

Microplasma technology has found applications in cosmetics through the generation of plasma-activated water (PAW), which promotes skin exfoliation by facilitating the removal of dead skin cells via reactive species that enhance cellular turnover without invasive procedures.^[90] This non-thermal approach leverages short-lived reactive oxygen and nitrogen species in PAW to mildly abrade and renew the skin's outer layers, mimicking gentle chemical peels while minimizing irritation.^[91] In cosmetic sterilization, microplasma enables chemical-free treatment of skin conditions like acne using helium (He) jets, which deliver targeted antimicrobial effects by inactivating bacteria such as Propionibacterium acnes through ozone and UV radiation generation.^[92] These He microplasma jets operate at atmospheric pressure and low temperatures, allowing precise application to acne-prone areas for rapid bacterial reduction without damaging surrounding tissue.^[93] Such methods overlap briefly with wound care by providing similar sterilization benefits for minor skin abrasions.^[94] For surface treatments, microplasma is employed in packaging sterilization, where it effectively inactivates microorganisms on polymer surfaces like polyethylene and polypropylene without residues or heat damage.^[95] This process utilizes UV photons and reactive species from microplasma discharges to achieve log reductions in bacterial loads, ensuring aseptic conditions for food and pharmaceutical containers.^[96] Hydrophilization via microplasma enhances adhesive bonding on hydrophobic surfaces by reducing water contact angles, for instance, from approximately 90° on untreated high-density polyethylene (HDPE) to as low as 10°-20° post-treatment, thereby improving wettability and adhesion strength.^[97] The treatment introduces polar functional groups like hydroxyl and carbonyl onto the surface through oxygen-containing plasma, promoting uniform adhesive spreading and durability in industrial assemblies.^[98] In industrial applications, microplasma pretreatment boosts textile dyeing efficiency by increasing fabric surface roughness and hydrophilicity, leading to higher dye uptake and color fastness in cotton and polyester materials.^[99] For example, atmospheric pressure microplasma exposure enhances pigment adhesion in dark shade dyeing, reducing the need for chemical mordants and improving environmental sustainability.^[100] Additionally, low-temperature microplasma cleaning removes contaminants from delicate surfaces, such as optics and electronics, using ionized gas to volatilize organic residues without thermal stress.^[101] Emerging developments include consumer device prototypes for cosmetic applications, such as portable cold plasma units that target acne and skin rejuvenation through controlled reactive species delivery.^[102] These prototypes, advancing from laboratory microplasma sources, enable at-home treatments with precise energy dosing for enhanced skin permeability and microbial control.

Plasma Medicine

Dental and Wound Care

Microplasma jets, particularly those utilizing argon-oxygen mixtures, have demonstrated efficacy in dental root canal disinfection by targeting persistent bacterial biofilms without the need for antibiotics. In vitro studies using a direct current, cold atmospheric-pressure Ar/O₂ (2%) plasma microjet have shown a 98.8% reduction in Enterococcus faecalis biofilms within root canals after 8 minutes of treatment, with complete inactivation achievable in extended exposures.^[103] Similarly, nonthermal atmospheric pressure plasma jets operating with Ar/O₂ gas have eradicated biofilms in extracted human teeth, achieving over 99% bacterial reduction through membrane rupture and structural disruption observed via scanning electron microscopy. These treatments maintain non-thermal conditions, with gas temperatures below 40°C, preserving dentin integrity while inactivating pathogens like E. faecalis and Candida albicans. In wound care, microplasma devices promote healing of chronic ulcers by generating reactive oxygen and nitrogen species (ROS/RNS), which reduce bacterial load and stimulate tissue regeneration. Clinical trials from the 2000s to 2020s, including randomized controlled studies on diabetic foot and venous leg ulcers, have reported accelerated wound closure rates, with plasma-treated groups showing significantly faster reduction in wound area compared to standard care.^[104] For instance, non-thermal N₂/Ar micro-plasma jet exposure in murine models increased nitric oxide levels in wound tissue by over 80 μM after 90 seconds, enhancing re-epithelialization and reducing open wound surface area by day 7.^[105] These effects are attributed to selective modulation of cellular responses, where low-intensity electric fields of 1–5 kV/cm in the plasma plume induce non-thermal stimulation of fibroblasts and keratinocytes without thermal damage. The antimicrobial mechanisms of microplasma in both dental and wound applications rely on non-thermal effects, including UV radiation, charged particles, and ROS/RNS that penetrate and disrupt biofilms. In dental settings, these species achieve deep penetration into dentinal tubules up to 800 μm, yielding log reductions of 3 or more in viable bacteria. For chronic wounds, the generated RNS like NO promote angiogenesis and collagen deposition, while avoiding cytotoxicity to host cells at controlled doses. Handheld atmospheric microplasma jets, such as the kINPen MED device, facilitate precise, portable application in clinical environments. Operating with argon gas flow at 4–5 L/min and power settings around 8 W, the kINPen has been utilized in ex vivo root canal studies for 60-second treatments achieving approximately 3 log bacterial reductions.^[106] By 2015, similar cold plasma jet devices received regulatory approvals in Europe (CE marking) for chronic wound treatment, enabling widespread clinical adoption for infection control and healing promotion. As of November 2025, ongoing trials continue to evaluate expanded applications in plasma medicine.

Cancer Therapy and Sterilization

Microplasma has shown promise in cancer therapy through its ability to selectively induce apoptosis in tumor cells, primarily via the generation of reactive oxygen species (ROS). This selectivity arises because cancer cells often exhibit higher basal ROS levels and reduced antioxidant capacity compared to normal cells, making them more susceptible to oxidative stress from microplasma-derived ROS. In vitro studies have demonstrated effective cell killing; for instance, exposure of A-375 human melanoma cells to a micro-plasma jet for 10 minutes resulted in approximately 54% apoptosis, compared to only 3% in normal HA1800 skin cells, highlighting the preferential targeting of malignant cells.^[107] The mechanisms underlying microplasma's anticancer effects include DNA damage inflicted by ultraviolet radiation and charged particles produced in the plasma, which disrupt cellular integrity and trigger programmed cell death pathways. Additionally, ROS from microplasma can synergize with conventional chemotherapy agents to enhance tumor cell death; for example, cold atmospheric plasma combined with doxorubicin has shown additive effects in reducing viability of melanoma cells by amplifying ROS-mediated apoptosis and overcoming drug resistance.^[108] Recent reviews using helium/oxygen (He/O₂) microplasma jets have further explored this synergy, reporting improved efficacy in preclinical models of solid tumors through enhanced intracellular ROS accumulation.^[108] In medical sterilization, microplasma enables rapid decontamination of implants and surgical tools by producing ROS and UV light that inactivate pathogens without damaging heat-sensitive materials. Studies have achieved 4 log reductions in viral viability, such as for norovirus on surfaces, within 5 minutes of exposure, making it suitable for point-of-care applications in operating rooms.^[109] This efficiency stems from the plasma's ability to generate short-lived reactive species that penetrate biofilms and directly disrupt viral envelopes. As of November 2025, microplasma-based cancer therapies remain primarily in preclinical stages, while broader cold atmospheric plasma therapies have progressed to phase I clinical trials in the 2020s evaluating safety and feasibility for advanced solid tumors, including as an adjuvant post-surgery to target residual microscopic lesions. However, challenges persist, particularly limited penetration depth into solid tumors due to the short lifespan of plasma-generated species, necessitating innovations like plasma-activated liquids or deeper-tissue delivery systems for broader clinical adoption.

References

[1]
20 years of microplasma research: a status report - SpringerLink
Feb 4, 2016 · Microplasmas, defined as plasmas where at least one di- mension is in the submillimeter range, include microarcs and microsparks, which are ...
[2]
Microplasmas - an overview | ScienceDirect Topics
Microplasma is defined as an ionized gas created within a small bore, typically 10–500 μm in diameter, located between two metallic electrodes separated by ...
[3]
Microplasmas for Advanced Materials and Devices - Chiang - 2020
Dec 18, 2019 · Microplasmas are low-temperature plasmas that feature microscale dimensions and a unique high-energy-density and a nonequilibrium reactive environment.
[4]
Microplasmas - an overview | ScienceDirect Topics
Microplasma, or MPD, is defined as a stable glow discharge at atmospheric pressure confined to dimensions of 1 mm or smaller, which allows for the selective ...
[5]
Microplasmas and applications - IOPscience
Jan 20, 2006 · Often referred to as microdischarges or microplasmas, these weakly-ionized discharges represent a new and fascinating realm of plasma science.
[6]
An atmospheric-pressure, high-aspect-ratio, cold micro-plasma
Dec 15, 2014 · An atmospheric pressure nonequilibrium Ar micro-plasma generated inside a micro-tube with plasma radius of 3 μm and length of 2.7 cm is reported.Missing: mycoplasma macro
[7]
Microplasmas ignited and sustained by microwaves - IOPscience
For continuous microplasmas, however, the electron density is typically 1014–1015 cm−3. Inherently low duty cycle microplasmas exhibit lower average electron ...
[8]
An atmospheric-pressure, high-aspect-ratio, cold micro-plasma - PMC
An atmospheric pressure nonequilibrium Ar micro-plasma generated inside a micro-tube with plasma radius of 3 μm and length of 2.7 cm is reported.Missing: definition | Show results with:definition
[9]
Microplasma: A New Generation of Technology for Functional ...
Aug 15, 2015 · Plasma technology has been widely applied in the ozone production, material modification, gas/water cleaning, etc.Missing: definition | Show results with:definition
[10]
[PDF] Microplasmas for nanomaterials synthesis
Jul 29, 2010 · The surface-to-volume ratio, which increases as the size of the plasma decreases, will alter the overall energy balance and could lead to plasma ...
[11]
[PDF] Investigations into the Operation of Diamond Microplasma Devices ...
In order for a plasma to remain in a stable state, the Debye length must be smaller than the ... higher pressure operation of the discharge. ... Stable operation of ...
[12]
[PDF] Characterization and Stabilization of Atmospheric Pressure DC ...
of the plasma where the Debye length is comparable to the distance to the wall. ... leads to the ability to operate stable DC microplasma at lower ...
[13]
The Transition to Paschen's Law for Microscale Gas Breakdown at ...
Apr 5, 2019 · At atmospheric pressure, VB transitions to PL near the product of pressure and gap distance, pd, corresponding to the Paschen minimum; at lower ...
[14]
[PDF] Electrical breakdown from macro to micro/nano scales
Feb 7, 2020 · A higher breakdown voltage is needed for either a very high or very lowpd value, which results in the minimum breakdown voltage between the ...
[15]
Breakdown Phenomenon and Electrical Process in a Microplasma ...
Dec 11, 2019 · Breakdown occurred at a lower voltage for 50 μm compared with the case of 100 μm. The Paschen curves showed different behavior for the systems ...
[16]
Optical emission spectroscopy and Langmuir probe studies of an ...
Dec 17, 2021 · Here, we present OES and double Langmuir probe (DLP) measurements on an intermediate pressure (∼10 Torr), flow-through supersonic microplasma ...Ii. Experiment · A. Microplasma Jet... · B. Optical Emission...
[17]
Nonequilibrium and effect of gas mixtures in an atmospheric ...
Apr 17, 2008 · In large-scale low-pressure plasmas, the electron temperature is typically much higher than the gas temperature, exhibiting nonequilibrium.
[18]
Gas temperature and electron temperature measurements by ...
Jan 12, 2007 · Here it is shown that the microplasma is in nonequilibrium and appears to be in glow mode. The effect of power and oxygen content is also ...
[19]
25 W of average power at 172 nm in the vacuum ultraviolet from flat ...
Mar 8, 2017 · More than 25 W of average power and > 800 W of peak power have been generated at λ = 172 nm (⁠ h ν = 7.2 eV) in the vacuum ultraviolet (VUV) ...
[20]
Pressure-independent point in current-voltage characteristics of ...
May 11, 2010 · We introduce the idea of a pressure-independent point (PIP) in a group of current-voltage curves for the coplanar electrode microplasma device ...
[21]
[PDF] Development and study of microdischarge arrays on silicon
Jul 11, 2013 · By extending the principle of operation of hollow cathode microdischarges to tube geometry, the formation of stable, high- pressure plasma ...
[22]
Applications of Dielectric Barrier Discharge Microplasma - IntechOpen
Microplasma is a nonequilibrium plasma under atmospheric pressure; thus active species and high-energy electrons generated by microplasma decompose the ...
[23]
Discharge Characteristics and Plasma Erosion of Various Dielectric ...
Aug 3, 2018 · The glass, quartz, and alumina solid plates and the flexible polymer films were used as the dielectric materials for the experimental samples.<|control11|><|separator|>
[24]
Fundamental properties of a touchable high-power pulsed ... - PubMed
This system can realize a maximum power density of 5 × 10(8) W/cm(3). The measured electron number density, excitation temperature and afterglow gas temperature ...Missing: 9 | Show results with:9
[25]
https://iopscience.iop.org/article/10.1088/1361-6595/27/5/055014
[26]
Radio-frequency-driven near atmospheric pressure microplasma in ...
Aug 4, 2003 · We report hollow electrode geometries that support near atmospheric (89 kPa) microdischarges in Ar and Ar–air mixtures when excited at 13.56 ...
[27]
Optical and electrical characterization of an atmospheric pressure ...
May 31, 2007 · In this work, we present a microplasma rf jet source aimed mainly towards film growth applications. The discharge has been characterized by ...
[28]
Computational study of plasma sustainability in radio frequency ...
May 15, 2014 · A 13.56 MHz rf-voltage source with peak voltages in the range of 50 ... This illustrates that (atmospheric pressure or lower pressure) rf ...<|separator|>
[29]
(PDF) An inductively coupled miniature plasma jet source at ...
Aug 7, 2025 · A miniature double plasma jet source driven at microwave frequencies (~2.45 GHz) was developed and analyzed. The source consists of a copper ...
[30]
Small surface wave discharge at atmospheric pressure - IOPscience
Aug 20, 2009 · A small surface wave driven source produces plasma at atmospheric pressure. Microwave power at frequency 2.45 GHz is coupled with the source and a discharge is ...Missing: microplasma | Show results with:microplasma
[31]
[PDF] A Highly Efficient Microwave Plasma Jet Based on Evanescent ...
The dimensions of the designed EVA plasma jet at 2.45 GHz are presented in Table I. The proposed microwave plasma jet operates at atmospheric pressure with a.
[32]
Dynamics of strong-field laser-induced microplasma formation in ...
Mar 4, 2010 · Transform-limited pulses of 2.4 mJ centered at 800 nm were generated using a Ti:sapphire regenerative amplifier (RA) with a pulse duration of 80 ...
[33]
Pressure dependence of emission intensity in femtosecond laser ...
Aug 6, 2025 · Experiments were performed with a Ti:sapphire laser system (130 fs, 800 nm), from atmospheric pressures down to 10 À3 Torr and at pulse energies ...
[34]
Microscale nanosecond laser-induced optical breakdown in water
Sep 17, 2008 · Microscale optical breakdown induced in bulk pure water by high-power nanosecond KrF laser pulses was studied using optical transmission and ...
[35]
[PDF] History of Ozone Synthesis and Use for Water Treatment
electrostatic induction published in 1857 Siemens described a silent discharge apparatus for preparing ozone from air or oxygen. In his later years Siemens ...
[36]
The Gas Discharges in History and Teaching of Physics and Chemistry
The experiments of discharges in gases, used before mainly as entertainment, became usual in research laboratories, during the 19th century. In 1838 Michael ...<|control11|><|separator|>
[37]
[PDF] CHARACTERIZATION OF PASCHEN CURVE ANOMOLIES ... - DTIC
In 1889 he stated what became known as Paschen's law which describes the relationship between breakdown voltage, and the product of pressure and distance for a ...
[38]
December 1910: Neon lights debut at Paris Motor Show
Dec 1, 2015 · It also hosted the first neon lights, thanks to a French chemist and engineer who became known as the “Edison of Paris”: Georges Claude.
[39]
[PDF] Glow discharge optical spectroscopy and mass spectrometry.
Developed in the early twentieth century(1–3) as a spectrochemical ionization source used for fundamental studies of atomic structure, a variation of the ...
[40]
The Growth of the High-Frequency Electrodeless Discharge - jstor
Jul 9, 2017 · Detailed examination shows that this is not so (Francis & von Engel 1950). From equations (5) and (6) one can calculate how the energy of an ...Missing: stability | Show results with:stability
[41]
[PDF] History of the plasma display panel - steptail.com
In 1968, they had an area of 100. 100 mm and an array of 128. 128 pixels. They were reasonably transparent and could be easily addressed for graphics, as shown ...Missing: microdischarge | Show results with:microdischarge
[42]
Their History, Discharge Physics, and Industrial Applications
Aug 6, 2025 · Industrial applications include ozone generation, pollution control, surface treatment, high power CO2 lasers, ultraviolet excimer lamps, ...
[43]
Excimer lamps: history, discharge physics, and industrial applications | Semantic Scholar
### Summary of Excimer Lamps: History, Discharge Physics, and Industrial Applications
[44]
[PDF] History of the plasma display panel - Semantic Scholar
The 40 year development of the plasma display panel from the first single pixel device, invented at the University of Illinois in 1964, to the 80-in ...Missing: microdischarge | Show results with:microdischarge
[45]
Microplasma jets operating at atmospheric pressure and ambient ...
Dec 6, 2016 · The putative biomedical applications of microplasma jets are particularly promising because they provide a way of producing reactive oxygen and ...
[46]
[PDF] International Workshop on Microplasmas (5th) - DTIC
Apr 14, 2010 · Micro hollow cathode discharges (MHCD) consist of two electrodes separated by a thin dielectric (100 mm). The discharge develops in a hole ...
[47]
High stability plasma illumination from micro discharges with ...
Decorating nanodiamonds on laser-induced graphene (nD-LIG) improves microplasma device stability, achieving 1770s compared to 718s for bare LIG.
[48]
Commercialization of microcavity plasma devices and arrays ...
Aug 17, 2022 · This article describes microplasma-based devices and systems currently being manufactured for applications in photolithography, photopatterning, and other ...
[49]
Production and optimization of a nanosecond pulsed microplasma ...
SPECTRON is an interdisciplinary project that proposes the development of a new microplasma source of atomic nitrogen ... The ANR has funded over 28,000 projects ...Missing: ongoing | Show results with:ongoing
[50]
Discharge Physics of Alternating Current Plasma Display Panels ...
Aug 6, 2025 · A typical Samsung plasma display panel (PDP) is composed of millions of three-part cells that are 1.08mm x 0.36mm x 0.15mm in size and produce a ...
[51]
[PDF] Characteristics of Microplasma Modes in a Plasma Display with an ...
A Ne + 4%Xe gas mixture was used as a discharge gas and the total gas pressure was 500 Torr. Fig.2 shows the pulse waveforms applied to the sustain ...Missing: mycoplasma | Show results with:mycoplasma
[52]
Unveiling Plasma Display Panel Industry Trends - Data Insights Market
Rating 4.8 (1,980) Apr 12, 2025 · Mid-2000s - 2010s: Significant decline in PDP market share due to the rise of LCD and OLED technologies. 2010s - Present: Most major ...
[53]
Lighting from thin (<1 mm) sheets of microcavity plasma arrays ...
Jun 15, 2007 · Efficacy values well in excess of 20 lm W−1 are expected when the array design and microcavity-phosphor geometry are optimized.Missing: efficiency lumens
[54]
(PDF) Development of Microplasma Arrays for High Efficiency ...
... lifetimes of >50,000 hours. Keeping the electrodes away from the gas discharge prevents metal sputtering which is the major contributor to the limited lifetime ...
[55]
Aluminum foil lamps outshine incandescent lights
Jun 6, 2007 · Values exceeding 30 lumens per watt are expected when the array design and microcavity phosphor geometry are optimized, Eden said.
[56]
Plasma Display Panel Strategic Insights: Analysis 2025 and ...
Rating 4.8 (1,980) Jun 5, 2025 · The plasma display panel (PDP) market, while significantly diminished compared to its peak in the mid-2000s, still retains a niche presence.
[57]
Study on Decomposition of Indoor Air Contaminants by Pulsed ...
Various radicals (N*, O*, OH*, etc.) generated by the microplasma reacted with the VOC and decomposed it. Aroma sensory assessment was carried out by a ...
[58]
Study of Air Pollution Control by Using Micro Plasma Filter
Aug 6, 2025 · For example, available technologies for NO x reduction include selective catalytic reduction ... The UV light from the microplasma discharge ...
[59]
[PDF] Study of NOx Removal Processes by Microplasma Generation
The electrical characteristics of the microplasma electrodes and the small size of the supply circuit show that this technology can be applied for NOx removal ...
[60]
Microplasma-assisted synthesis of TiO2–Au hybrid nanoparticles ...
We synthesized TiO 2 –Au hybrid NPs using atmospheric microplasma–liquid interaction and demonstrated their enhanced photocatalytic activity.
[61]
Investigation on the Performance of Plasma Microreactor with ...
Aug 8, 2025 · A custom-made Corona-DBD hybrid microplasma reactor has been designed and employed for water steam plasmolysis. ... Hydrodynamic cavitation as a ...
[62]
Underwater microplasma bubbles for efficient and simultaneous ...
In this work, a novel microplasma bubble (MPB) reactor was developed to generate plasma discharges inside small forming bubbles as an effective mean of ...
[63]
Spatially extended atmospheric plasma arrays | Request PDF
Aug 7, 2025 · This paper reports a systematic study of spatially extended atmospheric plasma (SEAP) arrays employing many parallel plasma jets packed ...
[64]
https://onlinelibrary.wiley.com/doi/10.1002/ppap.202400194
[65]
Portable analytical system integrating purge and trap and ...
Portable analytical system integrating purge and trap and microplasma optical emission spectrometry for online discriminative detection of NO · Highlights.
[66]
Portable analytical system integrating purge and trap and ...
Portable analytical system integrating purge and trap and microplasma optical emission spectrometry for online discriminative detection of NOx. · Rui Yang, Luji ...
[67]
Microplasma Ionization of Volatile Organics for Improving Air/Water ...
Apr 14, 2016 · We investigate the use of a low power microplasma device in the microhollow cathode discharge (MHCD) configuration for the analysis of polar organics ...Tof Ms Instrumentation · Results And Discussion · Effect Of Gas Type And Flow
[68]
Microplasmas for Portable Optical Emission Spectrometry
Apr 27, 2021 · The focus of this chapter will be on microplasmas that have been, or that can be, used with portable optical spectrometers, or that have been commercialized.
[69]
Dielectric Barrier Discharge Microplasma Actuator for Flow Control
In Figure 9 the characteristics of ozone concentration versus power consumption is shown. The microplasma actuator has an ozone yield of about 28 g/kWh ...
[70]
The influence of gas temperature on ozone generation in ...
Compared with these traditional methods, atmospheric air dielectric barrier discharge (DBD) demonstrates promising potential for efficient ozone generation due ...Missing: microplasma | Show results with:microplasma
[71]
Assessment of a Novel Point-of-Use Drinking Water Treatment Method
Mar 13, 2020 · A single chip (microchannel array) can produce 130 grams/kilowatt-hour, about three times more efficient than conventional dielectric barrier ...Missing: yield | Show results with:yield
[72]
microplasma ozonation vs. chlorination - RSC Publishing
Oct 31, 2016 · Microplasma ozonation (MPO) is a promising technology for decentralized water reuse disinfection. We used an integrated life cycle assessment ...
[73]
Machine Learning-Assisted Portable Microplasma Optical Emission ...
Mar 21, 2024 · A portable device based on a point discharge microplasma optical emission spectrometer (μPD-OES) was combined with machine learning to enable on-site food ...Missing: NO2 | Show results with:NO2
[74]
Interpreting convolutional neural network for real-time volatile ...
Sep 22, 2021 · Finally, it is demonstrated that incorporating the microplasma platform and the CNN model can perform real-time VOC monitoring. We believe that ...
[75]
Exhaled volatile organic compounds as novel biomarkers for early ...
May 5, 2025 · Exhaled samples were directly injected into the gas inlet for field VOC analysis and automatically analyzed in real-time using a portable Micro ...
[76]
(PDF) Synthesis of carbon nanotubes by plasma-enhanced ...
Aug 10, 2025 · Synthesis of carbon nanotubes by plasma-enhanced chemical vapor deposition in an atmospheric-pressure microwave torch. De Gruyter. Pure and ...
[77]
Synthesis of few-layer graphene via microwave plasma-enhanced ...
Jun 12, 2008 · A way to extend the capabilities of plasma-enhanced chemical vapour deposition to the synthesis of freestanding few-layer graphene is presented.
[78]
Robust Laser‐Induced Graphene‐Boron‐Doped Diamond Nanowall ...
Apr 21, 2025 · This investigation introduces a scalable fabrication method for laser‐induced graphene (LIG)‐boron‐doped diamond nanowall (BDNW) hybrid ...
[79]
Nano-additively manufactured gold thin films with high adhesion ...
In addition to attaining 1 nm/s deposition rates—on par with traditional (i.e., vacuum) sputtering, the microplasma sputterer creates ~100 nm-thick gold films ...
[80]
Effect of Ar microplasma irradiation on surface, structural and field ...
Mar 25, 2025 · Ar microplasma irradiation is used to induce morphological, structural, electrical and field emission modifications of brass for different treatment times.
[81]
In Situ Plasma Studies Using a Direct Current Microplasma in a ...
Feb 25, 2024 · This work presents a stable direct current glow discharge microplasma setup built inside a scanning electron microscope. The experimental setup ...
[82]
Microplasma reforming of hydrocarbons for fuel cell power
The implementation of a microplasma approach for small scale reforming processes is explored as an alternative to more standard catalyst-based processes.
[83]
[PDF] Reforming of JP-8 in Microplasmas for Compact SOFC Power <500 W
Nov 30, 2012 · This project seeks to determine the feasibility of microplasma reforming as an effective means of hydrogen production to support compact fuel ...
[84]
Hydrogen production by methanol reforming in a non-thermal ...
Aug 9, 2025 · This study describes experimental microplasma reactors reforming methanol. The reactors are based on the microhollow cathode discharge (MHCD) ...
[85]
Enhancing H2 production from plasma‐assisted methanol steam reforming by catalyst engineering in a MXene membrane reactor
### Summary of Ni Catalysts in Plasma-Assisted Methanol Reforming
[86]
Micro Power Generation from Micro Fuel Cell Combined with Micro ...
The thermal efficiency of the integrated micro methanol reformer was 76.6%. The operating conditions and the performance of the micro methanol reformer is ...
[87]
A Study of Plasma-Assisted Ignition in a Small Internal Combustion ...
Jul 24, 2025 · To enhance the lean combustion and expand the lean-burn limit of a spark-ignition engine, a high-voltage nanosecond pulsed plasma is ...
[88]
On the modes of nanosecond pulsed plasmas for combustion ...
Aug 6, 2024 · Employing repetitive 10-pulse sequence at 10 kHz, the lean-fuel limit was extended from an equivalence ratio of 0.6 for the single pulse ...Missing: micro- | Show results with:micro-
[89]
Enhancement of plasma assisted ignition by multi-voltage pulse ...
May 14, 2024 · In this paper, we lay physical foundations for such enhanced ignition strategies that can support lean combustion strategies in spark ignition engines.
[90]
CAREER: Low Temperature Microplasmas For Thermal Energy ...
Thermionic energy conversion (TEC) is the direct conversion of heat to electricity by the thermal (thermionic) emission of electrons from a very hot surface ...
[91]
Micro-gap thermo-photo-thermionics: An alternative approach to ...
This work investigates an alternative to thermophotovoltaics for harvesting thermal and optical energy via photon coupling and thermionic energy conversion.
[92]
Surface DBD in moist air for nitrogen fixation: a comparative study of ...
Jul 17, 2024 · In this work, we investigated the water activation process for two different DBD energization methods; ie using periodic HV pulses with nanosecond risetimes ...
[93]
Effect of μPlasma Modification on the Wettability and the Ageing ...
Dec 14, 2021 · Orientation of the fibres to the observed contact angle was found to be crucial for obtaining reproducible measurements with lower deviation.
[94]
The emerging potential of cold atmospheric plasma in skin biology
In CAP-treated solutions such as plasma-activated water (PAW), short and long lived species react with each other and create a powerful anti-microbial mix.<|separator|>
[95]
Direct and Indirect Bactericidal Effects of Cold Atmospheric-Pressure ...
Apr 26, 2021 · This research investigated the low discharge voltage bactericidal potential of direct microplasma treatment in comparison with indirect plasma ...
[96]
Safety aspects of atmospheric pressure helium plasma jet operation ...
Apr 5, 2017 · It is demonstrated that cumulative topical treatment with helium plasma jet could lead to skin damage.
[97]
Effects of Plasma-Activated Water on Skin Wound Healing in Mice
Jul 21, 2020 · These results indicate that PAW may be a new and effective method for promoting wound healing without side effects.Missing: microplasma | Show results with:microplasma
[98]
Sterilization of Food Contacting Surfaces via Non-Thermal Plasma ...
Dec 8, 2012 · This study demonstrates that plasma is a promising technology for sterilization of food contacting surfaces, because of its safety, easy handling, capability ...
[99]
Inactivation of microorganisms by newly emerged microplasma UV ...
Jun 1, 2021 · Microcavity plasma or “microplasma” technology is a new radiation source capable of generating UV radiation of different wavelengths in a slim ...
[100]
Enhancing wettability of high density polyethylenes (HDPE) through ...
Aug 9, 2025 · Hydrophilization was confirmed measuring contact angle before and after the microplasma surface treatment with argon gas. Initial contact angle ...
[101]
Enhanced Wetting and Adhesive Properties by Atmospheric ... - NIH
Mar 15, 2021 · The aim is to improve the wetting properties and to find the relationship between plasma treatment parameters, wetting, and adhesion.
[102]
Enhancing Dark Shade Pigment Dyeing of Cotton Fabric ... - MDPI
Experimental results reveal that plasma-treated cotton fabric can attain better color yield, levelness, and crocking fastness in dark shade pigment dyeing, ...
[103]
Plasma Treatment as Green Technology for Dyeing of Textile Fabrics
Apr 3, 2018 · Plasma technology has proven to impart enhanced dye exhaustion, dye penetration, dyeing in shorter time with minimal of chemical auxiliaries and energy usage.
[104]
[PDF] Plasma Cleaning of Surfaces - Glow Research
Plasmas provide a low temperature environment using electrical energy rather than heat to promote chemical reactions.Missing: microplasma delicate
[105]
Space Innovations for Everyday Skin Care: The Phlas Story
This compact skin care device for end users uses innovative cold plasma technology from the aerospace industry to help skin fight pimples, acne and ...
[106]
Revolutionizing Acne Treatments and Skin Care with Cold Plasma ...
May 20, 2025 · PHLAS, a cold plasma skincare device, originated from Max-Planck-Institute research and effectively targets acne-causing bacteria, improving ...
[107]
https://pubs.aip.org/tu/npe/article/7/1/013002/2921554/Experiment-on-inducing-apoptosis-of-melanoma-cells
[108]
Synergistic effects of cold atmospheric plasma and doxorubicin on ...
Mar 6, 2025 · However, researchers are excited about the potential of Cold Atmospheric Plasma (CAP) treatment cancer cells and overcome drug resistance ...
[109]
Cold atmospheric plasma sensitizes head and neck cancer to ...
Cold atmospheric plasma sensitizes head and neck cancer to chemotherapy and immune checkpoint blockade therapy ... Synergistic effect of cold atmospheric plasma ...
[110]
Virucide properties of cold atmospheric plasma for future clinical ...
Oct 3, 2016 · In this study, 10 min of CAP treatment caused about 4–6 log10 reductions of viral viability. Again, CAP exposure was followed by denaturation of ...Missing: equipment | Show results with:equipment