Fact-checked by Grok 2 weeks ago

Potassium thiocyanate

Potassium thiocyanate (KSCN) is an inorganic compound consisting of the potassium salt of thiocyanic acid, appearing as colorless, deliquescent crystals that are highly soluble in water.^[1] With a molecular weight of 97.18 g/mol, it has a density of 1.89 g/cm³, melts at 173 °C, and decomposes at approximately 500 °C without a defined boiling point.^[2] Synonyms include potassium rhodanide and potassium sulfocyanate, and it is hygroscopic, readily absorbing moisture from the air.^[1] In analytical chemistry, potassium thiocyanate serves as a key reagent for detecting iron(III) ions, forming a characteristic blood-red complex, FeSCN^{2+},^[3] through reactions such as with ferric chloride or ferric nitrate.^[2] It is also employed in titrimetric analyses for halides using silver nitrate and in soil acidity testing, where acidic conditions produce a red coloration.^[2] Industrially, it finds applications in textile dyeing and printing, photography as an intensifier, mustard oil production, and as a contact fungicide for crops, leveraging its ability to form thiocyanate complexes.^[1] In biological and food sciences, it contributes to antimicrobial systems, such as the lactoperoxidase-thiocyanate-hydrogen peroxide mechanism in milk preservation, and selective media for isolating pathogens like Listeria monocytogenes and staphylococci.^[4]^[5] Regarding safety, potassium thiocyanate is classified as harmful if swallowed, inhaled, or absorbed through the skin, potentially affecting the central nervous system and thyroid function, with symptoms including nausea and headache.^[1] It is also toxic to aquatic life and requires careful handling in laboratory and industrial settings to prevent environmental release.^[1]

Chemical identity

Formula and molecular structure

Potassium thiocyanate is an ionic compound with the molecular formula KSCN, consisting of a potassium cation (K⁺) and a thiocyanate anion (SCN⁻).^[1] Its molar mass is 97.18 g/mol.^[1] The thiocyanate anion (SCN⁻) adopts a linear geometry with a central carbon atom bonded to sulfur and nitrogen atoms. The bonding is characterized by resonance between two primary Lewis structures: ⁻S–C≡N ↔ S=C=N⁻. This delocalization results in bond orders intermediate between single and double bonds, with the S–C bond length approximately 1.66 Å and the C–N bond length approximately 1.16 Å, reflecting partial double bond character in both.^[6] As a key salt of the thiocyanate anion, potassium thiocyanate exemplifies the pseudohalide nature of SCN⁻, which mimics the reactivity of halide ions (such as chloride or iodide) in forming stable complexes and participating in analogous precipitation and redox reactions.^[7] The compound appears as colorless, deliquescent crystals that are odorless under standard conditions.^[1]

Physical properties

Potassium thiocyanate appears as colorless to white, hygroscopic crystals that deliquesce in moist air due to their affinity for water vapor.^[1]^[8] The compound has a melting point of 173 °C, which is notably low for an inorganic salt of this type.^[1]^[9] Its density is 1.89 g/cm³ at room temperature.^[2]^[1] Potassium thiocyanate decomposes at approximately 500 °C without reaching a boiling point.^[2]^[9] At room temperature, potassium thiocyanate crystallizes in an orthorhombic structure with the Pbcm space group.^[10] It undergoes an order-disorder phase transition to a tetragonal form at around 142 °C, involving reorientation of the SCN⁻ ions.^[11]^[12]

Production

Industrial production

Potassium thiocyanate is primarily produced industrially through the reaction of potassium cyanide with elemental sulfur in an aqueous solution. This process involves heating a mixture of potassium cyanide (KCN) and sulfur (S) in water, where the sulfur reacts with the cyanide to form the thiocyanate ion (SCN⁻), which is then neutralized to yield KSCN. The reaction is typically carried out under controlled conditions to ensure complete conversion, followed by purification steps such as filtration to remove unreacted materials and extraction with solvents like ethanol to isolate the product, with subsequent evaporation to obtain the solid. This method leverages readily available raw materials and is scalable for large-scale operations.^[13]^[14] An alternative industrial route involves recovery from coked waste liquor, a byproduct of coal coking processes that contains ammonium thiocyanate (NH₄SCN). The waste liquor is first decolorized with activated carbon and concentrated via nanofiltration to achieve a 30-60% NH₄SCN solution. This concentrate is then reacted with potassium hydroxide (KOH) in a 1:1 molar ratio at 40-100°C for 2-6 hours, displacing ammonia to form potassium thiocyanate and producing ammonia water as a co-product. The mixture undergoes further decolorization, vacuum dehydration, cooling, filtration, and drying at 80-100°C to yield the final product. This approach recycles industrial waste, mitigating environmental impacts from cyanide-containing effluents.^[15] The industrial production of potassium thiocyanate was developed in the 19th century, building on early syntheses of thiocyanate salts during investigations into cyanide chemistry. Modern processes emphasize sustainability, particularly through the recovery of thiocyanate from cyanide wastes in coking and related industries to reduce disposal burdens and comply with environmental regulations. Industrial grades typically achieve a purity of ≥99%, suitable for chemical and analytical applications. Global annual production is estimated in the thousands of tons, driven by demand in sectors like agrochemicals and pharmaceuticals.^[16]^[13]^[14]^[15]

Laboratory preparation

Potassium thiocyanate can be prepared in the laboratory through methods that prioritize precision, safety, and small-scale handling, often using cyanide-containing precursors under controlled conditions to minimize hazards. The classic laboratory method involves fusing anhydrous potassium ferrocyanide (K₄[Fe(CN)₆]) with potassium carbonate (K₂CO₃) and elemental sulfur (S) at elevated temperatures. A representative procedure mixes 46 g of anhydrous K₄[Fe(CN)₆], 17 g of K₂CO₃, and 32 g of S, which is then heated in an iron pan until fusion occurs, typically around 600–700°C, with evolution of gases such as carbon dioxide and hydrogen sulfide. The cooled residue is crushed and extracted with hot water or alcohol to dissolve the product, yielding KSCN after filtration and evaporation.^[17] Alternative approaches include the direct sulfuration of potassium cyanide (KCN) with sulfur in laboratory glassware, where KCN is heated with S in an aqueous or alcoholic medium under reflux to form KSCN, or a metathesis reaction between ammonium thiocyanate (NH₄SCN) and potassium hydroxide (KOH), producing KSCN along with ammonia and water. These methods are selected based on available reagents and require careful temperature control to avoid decomposition.^[18] Yields from these preparations typically range from 70–90%, depending on reaction efficiency and purity of starting materials. Purification is achieved by recrystallization from hot water or ethanol, which effectively removes impurities like residual ferrocyanide or cyanide compounds.^[17] Equipment for these syntheses includes a fume hood, heating mantle or furnace capable of high temperatures, and glassware resistant to corrosive fumes; an inert atmosphere, such as nitrogen, is essential to prevent oxidation side reactions. Post-synthesis, the product must be tested for cyanide residues using standard analytical methods like silver nitrate titration to confirm safety before use.^[17]

Chemical properties

Solubility and stability

Potassium thiocyanate exhibits high solubility in water, with a reported value of 217 g per 100 mL at 20 °C, making it suitable for preparing concentrated aqueous solutions that absorb significant heat upon dissolution.^[19] It is also soluble in ethanol and acetone, with solubility in acetone measured at 21 g per 100 mL at 22 °C, while being only slightly soluble in diethyl ether.^[19] These properties facilitate its use in various solvent-based applications, though care must be taken due to the endothermic nature of dissolution in water. The compound is stable under normal ambient conditions but is deliquescent, readily absorbing moisture from the air to form a hydrate.^[1] Thermal decomposition occurs above 500 °C, emitting toxic fumes including possible cyanides; specific products depend on conditions such as presence of oxygen. It is sensitive to strong acids, which can protonate the thiocyanate ion and release hydrogen cyanide (HCN) gas.^[20] Aqueous solutions of potassium thiocyanate are nearly neutral, with a pH range of 5.3 to 8.7 for a 5% solution at 25 °C, reflecting the weak acidity of thiocyanic acid.^[8] The thiocyanate ion undergoes slow hydrolysis in water to form thiocyanic acid (HSCN), though this process is minimal under neutral conditions and does not significantly alter stability over short periods. For long-term storage, potassium thiocyanate remains stable for years when kept in a cool, dry environment, protected from light and acids, in tightly sealed containers to prevent moisture absorption and deliquescence.^[21] Exposure to incompatible conditions can accelerate degradation, emphasizing the need for proper handling to maintain its integrity.

Reactivity and key reactions

The thiocyanate ion (SCN⁻) exhibits resonance, primarily between two structures: one with the negative charge on sulfur (S-C≡N)⁻ and the other with the negative charge on nitrogen (S=C=N)⁻, resulting in a linear geometry and ambidentate character that allows binding to metal centers through either the sulfur or nitrogen atom.^[22] This ambidentate nature influences coordination preferences, with softer metals favoring S-binding and harder metals favoring N-binding, as seen in various transition metal complexes.^[23] Thiocyanate behaves as a pseudohalide, mimicking halides in reactivity such as precipitation reactions; for example, it reacts with silver ions to form the insoluble silver thiocyanate (AgSCN).^[11]^[24] A key reaction is the formation of thiocyanato complexes with metal ions, notably the deep red [Fe(SCN)]²⁺ complex from Fe³⁺ and SCN⁻ in aqueous solution:

\text{Fe}^{3+} + \text{SCN}^{-} \rightleftharpoons [\text{Fe(SCN)}]^{2+}

This equilibrium is exploited for qualitative detection due to the intense color.^[25] In organic synthesis, potassium thiocyanate reacts with acyl chlorides to form acyl isothiocyanates:

\text{RCOCl} + \text{KSCN} \rightarrow \text{RCONCS} + \text{KCl}

These serve as intermediates for further synthesis.^[26] Strong oxidants like hydrogen peroxide oxidize thiocyanate to sulfate and cyanide, particularly under acidic conditions, yielding bisulfate (HSO₄⁻) and hydrogen cyanide (HCN) as primary products.^[27]

Applications

Analytical and laboratory uses

Potassium thiocyanate is widely employed in qualitative inorganic analysis for the detection of ferric ions (Fe³⁺). Upon addition to a solution containing Fe³⁺, it forms a highly colored blood-red complex, [Fe(SCN)]²⁺, which serves as a sensitive indicator for the presence of iron(III) in qualitative analysis schemes. This test is particularly useful in educational laboratory settings and standard cation identification procedures due to its vivid color change and specificity under acidic conditions.^[28] In gravimetric analysis, potassium thiocyanate facilitates the determination of silver by precipitating it as silver thiocyanate (AgSCN), a white, curdy precipitate that can be filtered, dried, and weighed to quantify silver content. This method is advantageous when chloride ions might interfere in alternative precipitations like AgCl, as AgSCN offers good crystallinity and low solubility for accurate mass measurements. Additionally, thiocyanate can help remove chloride interference in other gravimetric procedures by selectively precipitating silver from chloride-containing samples prior to the main analysis. Potassium thiocyanate is a key reagent in certain volumetric titrations, particularly as a standard solution in argentometric methods for halide determination. In Volhard's method, an excess of silver nitrate is added to a chloride sample to form AgCl precipitate, and the unreacted silver is back-titrated with a standard 0.1 M potassium thiocyanate solution using ferric ammonium sulfate as an indicator; the endpoint is marked by the formation of the red [Fe(SCN)]²⁺ complex.^[29] This indirect titration is effective for chloride, bromide, and iodide assays in laboratory and industrial samples, providing precise quantification with minimal interference when performed in acidic media.^[30] Historically, potassium thiocyanate has been used in biochemical laboratories for hemoglobin quantification through iron content analysis, where blood samples are oxidized to methemoglobin to release Fe³⁺, followed by complexation with thiocyanate for colorimetric measurement at around 480 nm. This method was common before modern spectrophotometric assays like cyanmethemoglobin became standard, though it is now less prevalent due to simpler alternatives.

Organic synthesis

Potassium thiocyanate (KSCN) is widely employed as a source of the thiocyanate anion (SCN⁻) in organic synthesis, enabling the construction of sulfur-functionalized compounds through nucleophilic substitutions and rearrangements. Its ambidentate nature allows for selective S- or N-centered reactivity, with conditions often tuned to favor the desired pathway. This versatility has made KSCN a staple reagent for preparing thiocyanate derivatives and sulfur-containing heterocycles. A key application involves the preparation of isothiocyanates from acyl chlorides. In this reaction, an acyl chloride (RCOCl) reacts with KSCN, typically under phase-transfer catalysis in a biphasic system (e.g., aqueous KSCN and benzene solution of the acyl chloride), to afford the corresponding isothiocyanate (RNCS), potassium chloride (KCl), and carbon monoxide (CO). The general equation is:

\text{RCOCl} + \text{KSCN} \rightarrow \text{RNCS} + \text{KCl} + \text{CO}

This method is particularly valuable for synthesizing mustard oils (alkyl or aryl isothiocyanates), which serve as intermediates in the production of pharmaceuticals and agrochemicals.^[31] KSCN also facilitates the synthesis of thiiranes (episulfides) from cyclic carbonates or epoxides. For instance, heating ethylene carbonate with KSCN leads to thiirane formation via ring opening and elimination of CO₂, providing a straightforward route to the simplest episulfide. Alternatively, epoxides undergo conversion to thiiranes through reaction with KSCN under phase-transfer catalysis, such as with quaternary ammonium salts in water at room temperature, yielding high efficiency and mild conditions without solvent waste. These episulfides are useful building blocks for larger sulfur heterocycles and polymer precursors.^[32]^[33] Alkyl thiocyanates are readily synthesized via S-alkylation of alkyl halides with KSCN, where the soft sulfur nucleophile preferentially displaces the halide, minimizing isothiocyanate (R-NCS) formation. The reaction proceeds efficiently in polar solvents like acetone or water, often accelerated by phase-transfer catalysts for primary and secondary alkyl bromides or iodides:

\text{RBr} + \text{KSCN} \rightarrow \text{RSCN} + \text{KBr}

This S-selective pathway is advantageous for preparing thiocyanate esters used in further functionalizations, such as thioether synthesis.^[34]^[35] Lead thiocyanate (Pb(SCN)₂), readily prepared from KSCN and lead(II) nitrate, acts as a key intermediate in converting acyl hydrazides to thiosemicarbazides. The acyl hydrazide (RCONHNH₂) reacts with Pb(SCN)₂ to generate an acylthiosemicarbazide (RCONHNHCSNH₂) through thiocyanation and rearrangement, often in acidic media. This approach provides access to thiosemicarbazide derivatives, which are precursors to bioactive heterocycles like 1,3,4-thiadiazoles.^[31]^[36] Historically, KSCN was instrumental in early 20th-century organic chemistry for constructing sulfur-containing heterocycles, such as thiophenes and thiazoles, via thiocyanation followed by cyclization of haloalkyl or amino precursors. Seminal works from the 1920s–1940s highlighted its role in developing synthetic routes to these motifs, influencing modern pharmaceutical synthesis.

Entertainment and special effects

Potassium thiocyanate is employed in entertainment for creating realistic visual effects, particularly in simulating blood for films and theater productions. When a dilute solution of potassium thiocyanate is applied to skin or props and then contacted with an iron(III) compound, such as ferric ammonium sulfate or ferric chloride, it forms a deep red iron(III) thiocyanate complex that mimics the appearance of blood. This reactive method has been used for decades in movies and low-budget productions to depict injuries, especially in scenes involving cuts or stabbings, where the color appears instantly upon "contact."^[37]^[38] In addition to blood simulation, potassium thiocyanate serves as a temporary colorant in stage props and educational demonstrations, where its colorless solution can be painted onto surfaces to produce vibrant red hues upon reaction, enhancing dramatic effects without permanent staining. This application extends to textile dyeing for costume props, providing short-term coloration that fades or washes out easily after use.^[39] For safety in these applications, dilute solutions (typically 0.1 M or less) are recommended to minimize skin irritation and staining, and the compound is considered non-toxic at low concentrations when used externally for props, though ingestion must be avoided and contact with eyes or mouth prevented. Protective gloves and proper ventilation are advised during preparation to handle the mild irritant properties.^[40]^[38] The technique gained popularity in Hollywood special effects starting in the mid-20th century, particularly from the 1940s onward in practical effects for theater and film, offering a cost-effective alternative to more complex syrup-based recipes. However, the rise of computer-generated imagery (CGI) since the 1990s has reduced reliance on such chemical methods, shifting toward digital simulations for scalability and safety, though practical effects like this persist in low-budget and indie productions.^[37]^[41]

Forensic applications

Potassium thiocyanate plays a key role in a copper(II) thiocyanate-based presumptive test for identification and approximate purity assessment of cocaine hydrochloride in forensic settings. The procedure entails dissolving the sample in dilute hydrochloric acid, adding cupric sulfate solution, followed by potassium thiocyanate, and extracting with chloroform; the development of a blue color in the organic chloroform layer signifies the presence of cocaine hydrochloride, with the color intensity providing a semiquantitative measure of purity.^[42] This test, based on coordination chemistry principles where thiocyanate facilitates complex formation with metal ions and cocaine, was integrated into standardized forensic field kits during the 1970s to enable rapid on-site drug enforcement screening. Its sensitivity allows detection of cocaine at concentrations as low as 1 mg, making it suitable for trace analysis in seized materials. False positives are infrequent when proper controls are applied, though procedural controls are essential to validate results. Despite its utility, the test lacks specificity to cocaine hydrochloride alone, as certain adulterants or related compounds may produce similar responses, positioning it strictly as a presumptive screen rather than definitive evidence. Confirmatory techniques, such as gas chromatography-mass spectrometry (GC-MS), are required for legal proceedings to ensure accuracy and rule out interferences.^[43]

Safety and handling

Toxicity and health hazards

Potassium thiocyanate exhibits acute toxicity primarily through ingestion and dermal contact, classified under GHS as harmful if swallowed (H302) and harmful in contact with skin (H312). The median lethal dose (LD50) for oral administration in rats is 854 mg/kg, indicating moderate toxicity in this route.^[40]^[44] Inhalation of its dust can also pose risks, classified as harmful (H332), leading to irritation of the respiratory tract upon exposure.^[40] Eye contact results in severe irritation, categorized under GHS H318, potentially causing serious damage to ocular tissues.^[44] Chronic exposure to thiocyanate ions from potassium thiocyanate interferes with thyroid function by competitively inhibiting iodine uptake in the thyroid gland, which can lead to goiter or hypothyroidism. This effect is particularly pronounced at elevated exposure levels, as observed in studies on prolonged thiocyanate administration.^[45]^[46] A significant hazard arises from the potential decomposition of potassium thiocyanate, which releases hydrogen cyanide (HCN) gas when exposed to acids or upon heating. This decomposition can induce cyanide poisoning, manifesting in symptoms including nausea, headache, dizziness, and in severe cases, respiratory failure or death.^[21]^[47] Environmentally, potassium thiocyanate is toxic to aquatic organisms, classified under GHS H412 as harmful to aquatic life with long-lasting effects, due to its persistence and potential for bioaccumulation in ecosystems. Thiocyanate ions, the primary degradation product, can accumulate in biological fluids; for instance, smokers exhibit elevated thiocyanate levels in saliva as a metabolite of cyanide from tobacco smoke, highlighting its biomagnification potential in exposed populations.^[48]^[49]

Precautions and storage

When handling potassium thiocyanate, appropriate personal protective equipment (PPE) must be worn to minimize exposure risks, including chemical-resistant gloves, safety goggles or glasses with side shields, and a laboratory coat or protective clothing.^[21]^[40] Respiratory protection, such as a NIOSH-approved respirator, may be necessary if dust or high concentrations are present.^[21] Solutions should be prepared and used in a well-ventilated chemical fume hood to avoid inhalation of vapors or dust.^[40] For storage, potassium thiocyanate should be kept in tightly closed containers in a cool, dry, well-ventilated area away from acids, oxidizing agents, moisture, heat, ignition sources, and direct light to prevent decomposition or hazardous reactions.^[21]^[40] Store separately from food, beverages, and incompatible materials. The compound is deliquescent and stable under these conditions, with an indefinite shelf life for the dry solid when properly protected. In case of spills, evacuate the area and ensure ventilation to disperse any dust or fumes; wear appropriate PPE during cleanup.^[40]^[21] Sweep or vacuum the material carefully to avoid generating dust, place in a suitable container for disposal, and prevent entry into drains, sewers, or waterways.^[40] For ingestion emergencies, do not induce vomiting unless directed by medical personnel; seek immediate professional medical attention, and only induce vomiting if the person is conscious and able to swallow.^[40]^[21] First aid measures include: for skin contact, immediately flush the affected area with plenty of water for at least 15 minutes and wash with soap if available, then seek medical advice if irritation occurs; for eye contact, flush eyes with water for 15 minutes while holding eyelids open and remove contact lenses if present, followed by medical evaluation; for inhalation, move the person to fresh air and provide oxygen if breathing is difficult, then obtain medical help.^[40]^[21] Potassium thiocyanate is classified as a hazardous substance under OSHA regulations (29 CFR 1910.1200), with an exposure limit of 5 mg/m³ TWA for the cyanide anion, and is listed under SARA Sections 311/312 (acute hazard) and 313.^[21] Disposal must comply with local, state, and federal regulations as hazardous waste; do not dispose in regular trash or sewage systems, and consult appropriate authorities or waste management services for proper treatment.^[40]^[21]

References

[1]
Potassium thiocyanate | KSCN | CID 516872 - PubChem - NIH
Potassium thiocyanate is a potassium salt which is the monopotassium salt of thiocyanic acid. It contains a thiocyanate.
[2]
Potassium Thiocyanate – KSCN - BYJU'S
Therefore, potassium thiocyanate can be used to test the acidity of the soil. Other names – Potassium rhodanate, potassium rhodanide. Table of Contents.
[3]
https://sciencedemonstrations.fas.harvard.edu/presentations/equilibrium-iron-iii-thiocyanate
[4]
https://www.sciencedirect.com/science/article/pii/B9780128121245000187
[5]
Formal Charges and Resonance – Chemistry
Possible Lewis structures and the formal charges for each of the three possible structures for the thiocyanate ion are shown here: Two rows of structures ...
[6]
Thiocyanate | CNS- | CID 9322 - PubChem - NIH
Thiocyanate is a pseudohalide anion obtained by deprotonation of the thiol group of thiocyanic acid. It has a role as a human metabolite.
[7]
[PDF] Potassium Thiocyanate - Nouryon
Sep 1, 2022 · Melting point approx. 172 °C. Solubility in water, 20°C approx. 2300 ... Thiocyanates are hygroscopic and will attract humidity from air.<|control11|><|separator|>
[8]
ICSC 1088 - POTASSIUM THIOCYANATE - INCHEM
Contact with water causes a strong cooling effect. Formula: KSCN Molecular mass: 97.18. Decomposes at 500°C Melting point: 173°C Density: 1.9 g/cm³
[9]
Materials Explorer
KCNS is Potassium thiocyanate structured and crystallizes in the orthorhombic Pbcm space group. K¹⁺ is bonded in a 8-coordinate geometry to four equivalent ...
[10]
Order-disorder phase transition in potassium thiocyanate
Nov 1, 1991 · The order-disorder phase transition in KSCN near 142 °C, which is connected with the head-tail orientation of the linear SCN molecules, ...Missing: orthorhombic cubic
[11]
The Phase Transition of Crystalline Potassium Thiocyanate, KSCN. I ...
Sep 22, 2022 · The phase transition of the potassium thiocyanate crystal at ca. 140°C has been studied by thermal and infrared methods. The transition is ...
[12]
Potassium Thiocyanate Production Cost Analysis Reports 2025
### Summary of Potassium Thiocyanate Production
[13]
Potassium thiocyanate - AERU - University of Hertfordshire
Pesticide properties for Potassium thiocyanate, including approvals, environmental fate, eco-toxicity and human health issues.<|control11|><|separator|>
[14]
Method for preparing potassium thiocyanate combined-produced ...
The invention discloses a method for preparing potassium thiocyanate combined-produced ammonia water by using coked waste liquor.
[15]
Potassium thiocyanate 333-20-0 wiki - Guidechem
Potassium thiocyanate was first synthesized in the early 19th century by German chemist Friedrich Wöhler during his investigations into cyanide compounds ...
[16]
Preparation of potassium thiocyanate - PrepChem.com
The obtained residue is remove half-cooled, then is crushed and boiled repeatedly with 80-90% ethyl alcohol. Upon cooling, part of the potassium thiocyanate ...
[17]
Potassium Thiocyanate: Chemical Synthesis, Colorimetry & Safety
Sep 5, 2025 · Industrial Production Methods. Reacting Sulfur with Potassium Cyanide results in the formation of Potassium Thiocyanate. Converting Ammonium ...
[18]
Potassium Thiocyanate - Schwan - Wiley Online Library
Apr 15, 2001 · Solubility: very sol H2O (217 g/100 mL at 20 °C); sol acetone (21 g/100 mL at 22 °C); sol EtOH. Form Supplied in: colorless or white crystals; ...
[19]
https://onlinelibrary.wiley.com/doi/10.1002/047084289X.rp252
[20]
[PDF] MATERIAL SAFETY DATA SHEET Potassium thiocyanate
Decomposition Temperature: Not available. Solubility in water: Soluble. Specific Gravity/Density: 1.886. Molecular Formula: KSCN. Molecular Weight: 97.18.Missing: thermal | Show results with:thermal
[21]
A review of thiocyanate gold leaching – Chemistry, thermodynamics ...
Jan 1, 2021 · The thiocyanate (S-thiocyanate) anion has a resonance structure. S-thiocyanate tends to form complexes with transition metals such as Au and Ag.
[22]
N-bonding vs. S-bonding in thiocyanato-copper(II) complexes
On the other hand, the ambidentate nature of the intermediate SCN− base permits both the N- and the S- atoms to be potential donor sites when they bind divalent ...Missing: resonance | Show results with:resonance
[23]
Inorganic Metal Thiocyanates - ACS Publications
Jul 9, 2024 · The Phase Transition of Crystalline Potassium Thiocyanate, KSCN. II ... Structural study of tetragonal-orthorhombic phase transition in ...
[24]
[PDF] 83 Volumetric Precipitation Titration - - hisham
When the excess of silver has reacted, the thiocyanate may react with the silver chloride, since silver thiocyanate is the less soluble until the ratio [Cl−] / ...
[25]
The thermodynamic formation constants for iron(III) thiocyanate ...
Two iron(III) thiocyanate complexes, Fe(SCN)2+ and Fe(SCN)2+, are known to exist in Fe3+ acidified aqueous solutions containing up to 0.25 M thiocyanate ion, ...
[26]
Phase Transfer Catalysis Preparation of Acyl Isothiocyanates
An aqueous solution of potassium thiocyanate and a benzene solution of the acyl chloride were stirred at room temperature in the presence of a phase ...
[27]
The Oxidation of Thiocyanate Ion by Hydrogen Peroxide. II. The Acid ...
Oxidation of thiocyanate to cyanide and sulfate by the lactoperoxidase-hydrogen peroxide system. Archives of Biochemistry and Biophysics 1970, 141 (1) , 73 ...
[28]
Qualitative tests on 3d-metal ions (Cr, Mn, Fe, Co, Ni, Cu, Zn) and Al ...
Fe(III) ions form yellow or brown ( rusty!) or red compounds with various agents. The reaction with thiocyanate ion is among the best for Fe(III) determination:
[29]
[PDF] Gravimetric analysis
The silver chloride precipitate is filtered, and the excess silver ion is titrated with thiocyanate producing a white precipitate of AgSCN. •Once the ...
[30]
[PDF] Gravimetric Determination of Chloride
The presence of other halides (iodide, bromide) and thiocyanate ion will cause the results to be high due to coprecipitation. Other interferents in the analysis.
[31]
Titration Technique for Chloride Analysis in Samples - Mettler Toledo
Volhard's method is a classic back titration technique for determining chloride ions in a sample. An excess of standard silver nitrate is added to react with ...
[32]
a Statistical Comparison of Mohr, Fajans, and Volhard Techniques
Dec 19, 2024 · The Volhard Method For example, 1 mL of syrup was added to an Erlenmeyer flask, followed by the addition of excess acid, iron(III) indicator, ...
[33]
[PDF] Reactivity and diverse synthetic applications of acyl isothiocyanates
12 Acyl isothiocyanates, in particular, are easily accessible by the reaction of acyl chlorides with thiocyanate salts such as lead thiocyanate, potassium ...
[34]
Thiirane | C2H4S | CID 9865 - PubChem - NIH
(1) REACTION OF ETHYLENE CARBONATE WITH SODIUM OR POTASSIUM THIOCYANATE; (2) REACTION OF ETHYLENE MONOTHIOCARBONATE WITH SODIUM CARBONATE... ... phase reaction ...
[35]
A facile and Convenient Method for Synthesis of Thiiranes under ...
A mild and efficient process for preparation of thiiranes with KSCN in water at room temperature using a catalytic amount of 1,4-bis(triphenylphosphonium)-2- ...
[36]
Inorganic-solid-supported potassium thiocyanate: study of reagent ...
Inorganic-solid-supported potassium thiocyanate: study of reagent preparation and a convenient synthesis of tert-alkyl thiocyanates | The Journal of Organic ...
[37]
A novel and efficient synthesis of alkyl thiocyanates from alkyl ...
Alkyl halides were converted efficiently to the corresponding alkyl thiocyanates under mild reaction conditions in water.<|separator|>
[38]
[PDF] Synthesis of some substituted 1,3,4-oxadiazoles, thiadiazoles and 1 ...
Jan 2, 2025 · hydrazide (1). The hydrazide was converted to 1-acyl thiosemicarbazide. (2) byits reaction with ammonium thiocyanate, which was treated with.
[39]
Fake Blood and Equilibrium
### Summary of Potassium Thiocyanate in Fake Blood for Movies
[40]
How to Make Fake Blood: 5 of Hollywood's Best Recipes | FX Elements
### Summary of Potassium Thiocyanate Use in Fake Blood
[41]
Potassium thiocyanate - MFA Cameo
Aug 25, 2022 · Potassium thiocyanate is used in printing and dyeing textiles. It is also used as an intensifier in photographic developing solutions for ...
[42]
[PDF] Safety Data Sheet - Fisher Scientific
Mar 19, 2015 · Potassium Thiocyanate is harmful if swallowed, in contact with skin, or if inhaled. Avoid dust, and do not release into the environment.Missing: deliquescent | Show results with:deliquescent
[43]
The Evolution of Special Effects in Cinema: From Practical to Digital
Apr 2, 2025 · Special effects evolved from practical effects created on set, to digital effects using computer graphics, and now often combines both.
[44]
Reagent for the identification of cocaine - Google Patents
The standard Scott Test (L. J. Scott, Specific Field Test for Cocaine, Microgram, VI, 179(1973), is based on the use of cobalt thiocycanate as incorporated ...
[45]
[PDF] Recommended methods for the Identification and Analysis of ...
This manual provides recommended methods for identifying and analyzing cocaine in seized materials, aiming to provide reliable forensic evidence.<|control11|><|separator|>
[46]
False positives and false negatives with a cocaine-specific field test ...
The aim of our study is to clarify the conditions that cause false negatives and false positives in the Scott test and to improve the test's specificity.
[47]
https://www.carlroth.com/downloads/sdb/en/P/SDB_P753_IE_EN.pdf
[48]
Does prolonged oral exposure to cyanide promote hepatotoxicity ...
Long-term exposure to cyanide and/or its main metabolite, thiocyanate, has been associated with goiter, pancreatic diabetes and several neurological disorders.
[49]
Thiocyanate in excess develops goiter followed by auto immune ...
Jan 15, 2021 · Thiocyanate that originates from BS even in presence of adequate iodine developed goiter and led goitrous population towards such diseases.
[50]
[PDF] Safety Data Sheet: Potassium thiocyanate - Carl ROTH
Decompostion takes place from temperatures above: 500 °C. 10.5 Incompatible materials. There is no additional information. Release of toxic materials with.
[51]
[PDF] Safety Data Sheet - Fisher Scientific
Mar 19, 2015 · Ecotoxicity: Harmful to aquatic organisms. May cause long-term adverse effects in the aquatic environment. Do not release into the environment.
[52]
Validity of Salivary Thiocyanate as an Indicator of Cyanide Exposure ...
Thiocyanate levels in both plasma and saliva increased with the amount of cigarette smoke, and the discriminant powers (smoker versus non smoker) of thiocyanate ...Missing: bioaccumulation | Show results with:bioaccumulation