Fact-checked by Grok 2 weeks ago

Staining

Staining is a laboratory technique used in microscopy to apply dyes or chemicals to biological specimens, such as cells, tissues, or microorganisms, in order to enhance contrast and visibility of structures that are otherwise transparent or colorless under a light microscope.^[1] This process selectively colors different components based on their chemical properties, such as proteins, carbohydrates, or lipids, enabling detailed observation and identification for diagnostic, research, and educational purposes.^[1] In biology, staining is fundamental to fields like histology, cytology, and microbiology, where it reveals cellular morphology, differentiates cell types, and highlights pathological changes.^[2] The primary purposes of staining include improving resolution in light microscopy, which magnifies specimens up to 1500 times, and supporting techniques like electron microscopy for even higher detail.^[1] Simple staining employs a single dye, such as methylene blue, to uniformly color all cells and outline basic shapes and arrangements, providing an initial overview of specimen morphology.^[2] Differential staining, a more advanced method, uses multiple dyes and steps to distinguish between similar structures; for instance, the Gram stain, developed in 1884 by Hans Christian Gram, classifies bacteria into Gram-positive (retaining purple crystal violet due to thick peptidoglycan cell walls) and Gram-negative (appearing pink after safranin counterstain due to thinner walls and outer membranes).^[3] Another key differential technique, the acid-fast stain, targets bacteria with waxy mycolic acids in their cell walls, like Mycobacterium tuberculosis, staining them red while non-acid-fast cells appear blue.^[2] In histology, staining is integral to tissue analysis, beginning with specimen fixation (often in neutral buffered formalin) to preserve structure, followed by dehydration, embedding in paraffin, sectioning into thin slices (typically 4-5 micrometers), and application of stains.^[1] The most common histological stain, hematoxylin and eosin (H&E), colors nuclei blue or purple with hematoxylin (a basic dye binding to acidic nucleic acids) and cytoplasm or extracellular matrix pink or red with eosin (an acidic dye binding to basic proteins), serving as a standard for routine pathological examinations.^[1] Special stains target specific substances, such as periodic acid-Schiff (PAS) for carbohydrates like glycogen (staining magenta) or Congo red for amyloid deposits in diseases like amyloidosis.^[1] These methods are crucial for diagnosing conditions including cancer, infections, and metabolic disorders, with ongoing advancements improving specificity and automation in clinical labs.^[1]

Fundamentals

Definition and Purpose

Staining is a technique in biological sciences that involves the application of dyes or chemical agents to specimens, such as cells, tissues, or microorganisms, to enhance contrast and make otherwise transparent or colorless structures visible under a microscope.^[4] This process selectively binds coloring agents to specific cellular or tissue components, allowing for their differentiation and detailed observation.^[1] The primary purposes of staining include highlighting key cellular components, such as nuclei and cytoplasm, to facilitate structural analysis.^[1] It enables the differentiation of tissue types by accentuating variations in composition, aids in the identification of pathogens through targeted coloration, and supports quantitative analysis in both research and diagnostic settings by improving the accuracy of measurements and interpretations.^[1] These objectives are essential for revealing biochemical and structural properties that would otherwise remain obscured.^[4] Staining interacts with microscopy illumination to produce enhanced visibility: in light microscopy, dyes absorb certain wavelengths of light and reflect others, imparting specific colors to the sample for better contrast against the background.^[4] Fluorescent stains absorb short-wavelength light, such as ultraviolet or blue, exciting electrons to higher energy states before they emit longer-wavelength visible light, creating glowing effects for precise localization.^[5] In electron microscopy, heavy metal stains increase electron density in targeted areas, scattering electrons to generate contrast in transmitted or reflected images.^[6] This method finds multidisciplinary applications across fields like microbiology for microbial identification, histology for tissue examination, and cytology for cellular studies, underpinning advancements in diagnostics and research.^[1]

Historical Development

The use of natural dyes for staining biological specimens dates back to the 18th century, with carmine, derived from cochineal insects, being employed by early microscopists to enhance visibility of tissues in plant and animal samples.^[7] This period marked the initial efforts to differentiate cellular structures, though techniques remained rudimentary and non-specific. In the 19th century, Paul Ehrlich advanced the field through his pioneering work with aniline dyes, synthetic coal-tar derivatives that allowed for selective staining of cellular components; his 1877-1881 investigations identified various white blood cell types, and by 1882, he developed a method to stain the tubercle bacillus, laying the groundwork for targeted affinity-based coloration.^[8] The introduction of synthetic dyes in the late 1800s further revolutionized staining, enabling more precise differentiation of bacteria, as exemplified by Christian Gram's 1884 technique, which used crystal violet and iodine to classify bacteria into Gram-positive and Gram-negative groups based on cell wall properties.^[3] The 20th century saw significant refinements in staining specificity and application. In 1924, Robert Feulgen introduced a DNA-specific stain based on the Schiff reaction following acid hydrolysis, providing the first reliable method to visualize chromosomal material in fixed tissues.^[9] Post-1940s developments shifted toward fluorescence, with Albert Coons' 1941 innovation of labeling antibodies with fluorescent dyes like fluorescein, enabling the birth of immunofluorescence for detecting specific antigens in cells.^[10] By the 1970s, immunohistochemistry emerged as a cornerstone, particularly with Ludwig Sternberger's 1970 development of the peroxidase-antiperoxidase (PAP) complex, which amplified signal detection and improved sensitivity for protein localization in tissues.^[11] Recent progress, extending into the 2020s, has focused on advanced molecular probes compatible with live-cell and high-resolution imaging. In the 2010s, collagen hybridizing peptides (CHPs) were developed as synthetic sequences that bind specifically to denatured collagen strands, allowing in situ detection of tissue remodeling and damage without fixation.^[12] Concurrently, super-resolution compatible dyes, such as photoactivatable variants for structured illumination microscopy (SIM), have enabled live-cell imaging of dynamic processes like endosomal trafficking with resolutions beyond the diffraction limit, as demonstrated in 2025 advancements.^[13] Technological influences have driven a shift from manual to automated staining in clinical laboratories, beginning in the 1980s with robotic systems for immunohistochemistry and expanding to high-throughput platforms by the 2000s, reducing variability and accelerating diagnostics.^[14]

Basic Principles

In Vivo versus In Vitro Staining

In vivo staining, also known as vital or intravital staining, refers to the application of dyes or fluorescent probes directly to living tissues or whole organisms to visualize cellular structures and processes without immediately killing the cells.^[15] This approach enables real-time imaging of dynamic biological events in their native physiological context, such as cell migration or vascular dynamics.^[16] A classic example is the use of lipophilic dyes like DiI (1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate), which is injected into living chick or Drosophila embryos to label neural progenitors and trace their fate during development.^[17] Another common vital stain is trypan blue, which selectively enters dead or damaged cells in living tissues, allowing assessment of cell viability by exclusion in healthy cells.^[18] The primary advantages of in vivo staining include the preservation of three-dimensional tissue architecture and the ability to observe live processes, such as blood flow or neuronal activity, which are lost in fixed samples; for instance, intravital dyes like Hoechst 33342 for nuclei and Alexa Fluor 488 isolectin for endothelium can label multiple organs in mice within an hour, enabling fluorescence microscopy after tissue processing but without additional staining.^[15] However, challenges arise from potential dye toxicity, which can alter cellular function or induce unintended responses, and issues like uneven diffusion or signal fading in deep tissues, limiting its use to biocompatible probes.^[15] These limitations are particularly evident in long-term studies, where photobleaching or immune reactions may compromise data quality.^[19] In contrast, in vitro staining involves applying dyes to isolated, fixed cells, tissue sections, or cultures outside the living organism, typically on glass slides for microscopic examination.^[1] This method is standard in histology, where fixatives like formalin preserve tissue morphology before staining to reveal static structural details, such as cellular organization in pathological samples.^[20] Examples include routine applications in diagnostic pathology, where fixed biopsies are stained to identify abnormalities in tissue architecture.^[1] In vitro staining offers advantages in experimental control, reproducibility, and safety, as fixation halts biological activity, preventing toxicity concerns and allowing precise manipulation of staining conditions for high-contrast imaging.^[1] It also enables archival storage of samples and compatibility with advanced techniques like immunohistochemistry.^[20] Nonetheless, fixation can introduce artifacts, such as tissue shrinkage, protein denaturation, or masking of antigens, which distort natural structures and hinder accurate interpretation of physiological states.^[20] These issues often necessitate optimization of fixative type and duration to balance preservation and staining efficacy.^[20] The distinction between in vivo and in vitro staining underscores their complementary roles: in vivo methods excel in capturing live dynamics but face biocompatibility hurdles, while in vitro approaches provide detailed, controlled snapshots at the cost of potential artifacts. Recent advances, such as two-photon microscopy dyes like ANNINE-6plus, bridge this gap by enabling deep-tissue in vivo voltage imaging in awake animals with minimal phototoxicity, expanding applications in neuroscience.^[21]

Positive versus Negative Staining

Positive staining involves the direct binding of dyes to specific cellular components, enhancing their visibility under a microscope through targeted contrast. In this technique, basic dyes, which are positively charged, interact ionically with negatively charged acidic structures such as nucleic acids in the cell. For instance, methylene blue, a cationic dye, binds electrostatically to RNA, allowing visualization of ribosomal and messenger RNA in cellular preparations. Acidic dyes, conversely, can bind to positively charged basic structures, though basic dyes predominate for most intracellular targets like nuclei due to their affinity for polyanionic molecules. This direct affinity ensures that the stained components absorb light and appear colored against a clear background, providing high-resolution detail for opaque or structured specimens. Negative staining, in contrast, achieves visualization by staining the surrounding medium rather than the specimen itself, resulting in unstained structures appearing as light outlines against a dark field. The mechanism relies on the exclusion of dye particles from the sample; acidic dyes or colloidal suspensions, being negatively charged, are repelled by the similarly charged cell surfaces or capsules, preventing penetration and instead depositing around the specimen. A classic example is the use of India ink, a suspension of carbon particles, to outline bacterial capsules: the ink particles do not enter the polysaccharide capsule due to electrostatic repulsion and size exclusion, creating a clear halo effect. This method is particularly effective for delicate, transparent structures that might be distorted by direct staining. The key differences between positive and negative staining lie in their contrast mechanisms and applications: positive staining provides internal detail through direct coloration, ideal for identifying specific cellular components, while negative staining offers silhouette-like outlines, excelling with translucent or heat-sensitive samples where background opacity enhances edge definition without altering the specimen. Negative staining's role in early virus visualization emerged in the mid-20th century, revolutionizing electron microscopy by enabling clear imaging of viral particles from liquid samples on grids, as pioneered in the 1950s.

Simple versus Differential Staining

Simple staining involves the application of a single basic dye to a specimen, which uniformly colors all cellular structures to highlight general morphology and arrangement without distinguishing between different cell types or components. For instance, methylene blue is commonly used to visualize bacterial shapes such as cocci or bacilli in smears, allowing for quick assessment of size and form under a light microscope.^[2] This method is advantageous for its simplicity and rapidity, requiring minimal preparation and equipment, making it ideal for initial observations in educational or routine laboratory settings. However, its primary limitation lies in the lack of specificity, as it cannot differentiate between similar-looking structures or reveal internal details like cell wall variations.^[22] In contrast, differential staining employs multiple dyes or sequential steps to selectively bind to specific cellular components based on their chemical and physical properties, thereby distinguishing between different structures or organism types. The mechanism relies on differences in affinity for dyes, such as varying cell wall compositions that affect dye retention after decolorization; for example, in the Gram stain, Gram-positive bacteria retain crystal violet due to their thick peptidoglycan layer, appearing purple, while Gram-negative bacteria decolorize and take up a counterstain like safranin, appearing pink.^[23] Similarly, in histological contexts, hematoxylin and eosin (H&E) staining differentiates nuclear material (stained blue by hematoxylin) from cytoplasmic and extracellular components (stained pink by eosin), aiding in the identification of tissue architecture and pathology.^[24] This approach provides greater diagnostic value, such as classifying bacterial infections or detecting cellular abnormalities in cytology smears and tissue sections.^[25] The evolution of staining techniques progressed from simple methods using aniline dyes in the 1880s, which enabled basic visualization of microbes, to more sophisticated differential protocols that emerged in the late 19th century for enhanced specificity in diagnostics. Pioneered by figures like Hans Christian Gram, who developed the Gram stain in 1884, these advancements built on earlier simple staining to exploit biochemical differences, revolutionizing microbiology and pathology by facilitating targeted identification in clinical applications.^[26] Today, differential staining remains central to modern diagnostics, from bacterial classification to histopathological analysis of diseases.^[27]

Sample Preparation

Standardization Protocols

Standardization in staining protocols is crucial for achieving reproducible results in diagnostics and research, enabling consistent interpretation of microscopic images across laboratories and minimizing inter-observer variability.^[7] By establishing uniform criteria for dye application, timing, concentrations, and environmental conditions, these protocols ensure that staining outcomes are reliable for identifying cellular structures and pathological features in fields such as histopathology and cytology.^[28] Regulatory bodies like the International Organization for Standardization (ISO), Clinical and Laboratory Standards Institute (CLSI), and World Health Organization (WHO) provide frameworks to harmonize these practices globally.^[7] Key protocols emphasize controlled parameters to optimize stain uptake and retention, typically involving dye exposures of 1-5 minutes at room temperature for common histological stains, with precise concentrations to avoid over- or under-staining.^[29] Temperature regulation, often maintained between 20-25°C, prevents degradation of reagents, while pH adjustments ensure compatibility with tissue types.^[30] These guidelines, aligned with ISO 15189 for medical laboratory quality, promote procedural uniformity from sample preparation through to final staining.^[28] Quality assurance measures include the routine use of control slides containing known tissue samples to validate stain performance before processing patient specimens, alongside periodic calibration of staining equipment to maintain accuracy.^[30] CLSI guidelines, such as those in document I/LA28 for immunohistochemical assays, recommend internal and external proficiency testing to monitor consistency, with external programs like those from the College of American Pathologists providing benchmarks for compliance.^[31] Automated staining machines, when calibrated, further enhance reliability by standardizing reagent delivery and timing compared to manual methods.^[32] Variations between manual and automated staining arise primarily in throughput and precision; manual techniques allow adjustments for sample thickness but are prone to human error, while automated systems ensure uniformity across batches, though they require validation for specific protocols.^[33] Adjustments for thicker samples may involve extended incubation times, but core parameters remain governed by standardized operating procedures to preserve diagnostic integrity.^[30] A major challenge is batch-to-batch variability in dyes, which can alter color intensity and specificity due to differences in manufacturing or storage, potentially leading to inconsistent results in histopathological analysis.^[34] Solutions include using certified dyes compliant with ISO/TS 17518:2015, which specifies purity and stability criteria for in vitro diagnostic reagents, thereby reducing such discrepancies.^[28] Post-2010 advancements integrate digital imaging for automated quality assessment, employing algorithms for stain normalization to correct variations in color and intensity across slides, enhancing objectivity in evaluations.^[35] These tools, often based on deep learning, facilitate real-time monitoring and have been validated for improving reproducibility in clinical settings.^[36]

Fixation and Mounting Techniques

Fixation is a critical initial step in sample preparation for staining, aimed at preserving biological tissues by halting autolysis and putrefaction through stabilization of cellular structures.^[37] This process terminates ongoing biochemical reactions and prevents degradation, enabling subsequent staining and microscopic examination.^[38] Fixation methods are broadly classified as chemical or physical; chemical fixation involves reagents that cross-link or coagulate proteins, while physical fixation uses techniques like heat or freezing to achieve similar preservation.^[37] Chemical fixation, the most common approach, relies on agents such as formalin (10% neutral buffered formaldehyde), which forms covalent bonds between protein amine groups, particularly lysine residues, to create a cross-linked matrix that maintains tissue architecture.^[39] Aldehyde-based fixatives like formaldehyde penetrate tissues slowly but provide excellent morphological preservation, though excessive exposure can mask antigens or hinder stain penetration by over-stabilizing proteins.^[40] In contrast, alcohol-based fixatives such as ethanol dehydrate tissues by disrupting hydrogen bonds and exposing hydrophobic regions, leading to protein coagulation; these offer faster penetration rates due to their smaller molecular size and higher diffusion coefficients compared to aldehydes, but they often result in tissue brittleness and reduced stain uptake if not balanced with other agents.^[41] Physical fixation, including heat (e.g., boiling or microwaving), rapidly denatures proteins to stop enzymatic activity but is less commonly used for routine histology due to potential distortion of delicate structures.^[38] Following fixation, mounting techniques prepare samples for sectioning and observation by embedding and positioning them securely. Tissues are typically dehydrated and embedded in paraffin wax or resin (e.g., epoxy for harder support), which provides a solid matrix for precise cutting.^[42] Sectioning via microtomy then produces thin slices, usually 4-10 μm thick for light microscopy, using a rotary microtome to ensure uniform ribbons of tissue that float onto slides in a warm water bath to flatten wrinkles.^[43] Finally, coverslipping involves applying a mounting medium (e.g., synthetic resins like Histomount) to the stained section, followed by placing a glass coverslip to protect the sample, seal it from air, and optimize refractive index for clear imaging.^[44] Key considerations in fixation and mounting include preventing artifacts that compromise interpretability, such as tissue shrinkage or hardening from over-fixation, which occurs when prolonged exposure to aldehydes like formaldehyde extracts lipids or causes excessive cross-linking, leading to distorted cellular dimensions.^[45] Optimal fixation times (typically 24-48 hours for small samples) and fixative volumes (at least 10-20 times the tissue volume) minimize these issues, while suitability varies by tissue type—e.g., formalin excels for general soft tissues but may poorly preserve glycogen-rich samples, where alcohol-based options perform better.^[46] Embedding choice also matters: paraffin suits routine histology for its ease in sectioning, whereas resin is preferred for denser tissues to avoid compression artifacts during microtomy.^[42] Advances in these techniques include cryofixation, developed from the 1970s onward, which rapidly freezes tissues in liquid nitrogen or propane to vitrify water without ice crystals, preserving ultrastructure for frozen sections in immunohistochemistry and reducing diffusion artifacts compared to chemical methods.^[47] This approach, building on early cryo-electron microscopy innovations, enables antigen retention for sensitive staining protocols.^[48] Safety is paramount when handling fixatives, as formaldehyde is classified as a human carcinogen by the International Agency for Research on Cancer, linked to nasopharyngeal cancer and leukemia from chronic inhalation or skin exposure in histology labs.^[49] Proper ventilation, use of personal protective equipment, and adherence to exposure limits (e.g., OSHA's 0.75 ppm ceiling) are essential to mitigate respiratory irritation and long-term risks during fixation and processing.^[50]

Types of Preparations

In staining procedures for microscopy, samples are prepared in various formats to optimize visualization of cellular or tissue structures, depending on the biological material and analytical goals. These preparations ensure that specimens are thin enough for light transmission while preserving morphology and enabling effective dye penetration. Common types include smears, sections, whole-mounts, cell cultures, and specialized formats like frozen sections and cytospins.^[1] Smear preparations involve spreading a thin film of liquid or semi-liquid samples, such as blood, cerebrospinal fluid, or bacterial suspensions, onto a glass slide, followed by air-drying and heat or chemical fixation to adhere the material. This method is particularly suited for rapid microbiological or parasitological assessments, as seen in the diagnosis of malaria where thin blood smears allow enumeration of Plasmodium parasites under light microscopy after Giemsa staining. Bacterial smears, for instance, are created by suspending cells in a drop of water, spreading them evenly, and fixing to prevent wash-off during staining, facilitating techniques like Gram staining for bacterial identification.^[51]^[52] Section preparations consist of cutting ultra-thin slices (typically 4-10 micrometers) from paraffin-embedded or frozen tissue blocks using a microtome, then mounting them on slides for staining. This approach is standard in histology for examining tissue architecture, as embedding in paraffin preserves structural integrity during sectioning, allowing detailed analysis of organs like liver or kidney biopsies with stains such as hematoxylin and eosin. Paraffin sections provide high resolution for routine diagnostics, while avoiding distortion from thicker samples.^[1]^[53] Whole-mount preparations entail staining and clearing intact small specimens, such as embryos, small organs, or thin tissues, without sectioning to visualize three-dimensional structures. For example, in developmental biology, whole-mount staining of mouse embryos with antibodies or dyes reveals spatial patterns of gene expression across the entire specimen, often followed by optical clearing to reduce light scattering for confocal imaging. This format is ideal for studying connectivity in neural or vascular networks in intact samples up to a few millimeters thick.^[54] Cell culture preparations adapt in vitro-grown cells for staining, either as adherent monolayers on coverslips or as suspensions centrifuged onto slides. Monolayers from cell lines like HeLa are fixed directly on culture substrates for immunofluorescence to assess protein localization, while suspensions are pelleted and smeared or cytocentrifuged for flow cytometry-compatible staining. This method supports studies of cellular processes in controlled environments, such as cancer cell proliferation markers.^[55] Special types include frozen sections, which involve rapidly freezing fresh tissue in a cryostat medium, cutting thin slices at -20 to -30°C, and immediately staining for intraoperative pathology consultations, preserving antigens better than paraffin but with potential ice crystal artifacts. Cytospin preparations deposit cells from fluids like pleural effusions or urine onto slides via low-speed centrifugation, concentrating sparse samples for staining in cytology, such as Papanicolaou for malignancy detection. These are chosen for time-sensitive or low-yield diagnostics.^[56]^[57] Selection of preparation type depends on the sample's nature, required resolution, and urgency; for instance, smears suit microbial or fluid-based microbes for quick, high-contrast views, while sections are preferred for complex tissues needing architectural detail, and whole-mounts for holistic overviews of small organisms. Factors like tissue thickness and fixation compatibility guide choices to balance preservation and imaging clarity.^[1]^[53]

Light Microscopy Techniques

Gram Staining

Gram staining, also known as Gram's method, is a foundational differential staining technique in microbiology that classifies bacteria into two primary groups based on cell wall properties. Developed by Danish bacteriologist Hans Christian Gram in 1884 while studying pneumonia pathogens in lung tissue, the method was first described in a publication detailing its use for visualizing bacterial morphology in histological sections.^[3]^[58] This technique has since become a cornerstone of bacterial identification, enabling rapid preliminary assessment in clinical and research settings. The procedure begins with preparing a bacterial smear on a glass slide, which is air-dried and heat-fixed to adhere the cells. The slide is then flooded with crystal violet, a basic dye, for 10 to 60 seconds, allowing it to penetrate the cells; excess dye is rinsed with water. Next, Gram's iodine solution is applied as a mordant for 10 to 60 seconds, forming a crystal violet-iodine complex within the cells. The slide is rinsed again, followed by decolorization with acetone-alcohol (a mixture of acetone and ethanol) for a brief period—typically until the runoff appears clear—which removes the complex from certain cells. Finally, the slide is counterstained with safranin (or basic fuchsin) for 40 to 60 seconds, rinsed, and dried before microscopic examination under oil immersion.^[3]^[58] The mechanism of Gram staining relies on differences in bacterial cell wall composition, particularly the thickness and structure of the peptidoglycan layer. Gram-positive bacteria possess a thick peptidoglycan layer (approximately 90% of the cell wall), which traps the crystal violet-iodine complex during decolorization, resulting in a purple or violet appearance under the microscope. In contrast, Gram-negative bacteria have a thin peptidoglycan layer (about 10% of the cell wall) surrounded by an outer lipid-rich membrane; the decolorizer dissolves these lipids, allowing the complex to wash out, and the cells take up the red safranin counterstain, appearing pink. This differentiation reflects fundamental phylogenetic divisions, as Gram-positive bacteria generally lack the outer membrane present in Gram-negatives.^[3]^[58] In clinical microbiology, Gram staining serves as an initial tool for bacterial classification from specimens such as blood, urine, cerebrospinal fluid, or tissue, facilitating the presumptive diagnosis of infections like pneumonia, urinary tract infections, and meningitis. It provides immediate morphological insights—such as cocci versus bacilli—and group identification, which is crucial for directing further culturing and susceptibility testing. However, limitations exist; the technique is ineffective against atypical bacteria lacking typical cell walls, such as Mycoplasma or Chlamydia, and may fail with very small or fastidious organisms. Additionally, prior antibiotic exposure or cultures older than 18-24 hours can lead to Gram-variability, where Gram-positive cells appear Gram-negative due to peptidoglycan degradation.^[3] Troubleshooting common artifacts is essential for accurate results. Over-decolorization, often from excessive acetone-alcohol exposure, can cause Gram-positive cells to lose their stain and mimic Gram-negatives, while under-decolorization retains purple in Gram-negatives; timing the decolorizer to 5-15 seconds with positive and negative controls mitigates this. Thick smears may trap dye unevenly, leading to false positives, so thin, even monolayers are recommended. Using fresh, actively growing cultures (4-18 hours old) minimizes variability from autolysis.^[3]^[58] Clinically, Gram staining holds significant value in guiding empirical antibiotic selection to optimize therapy and curb resistance. For instance, identification of Gram-positive cocci may prompt initial use of beta-lactams like penicillin, effective against organisms such as Streptococcus pneumoniae, whereas Gram-negative rods might indicate coverage with agents targeting Enterobacteriaceae, such as third-generation cephalosporins. Studies demonstrate that Gram stain-guided therapy reduces broad-spectrum antibiotic overuse without compromising outcomes, particularly in critical care settings for sepsis or ventilator-associated pneumonia.^[3]^[59]^[60]

Acid-Fast Staining

Acid-fast staining, also known as the Ziehl-Neelsen stain, is a differential staining technique designed to identify bacteria with high lipid content in their cell walls, particularly mycobacteria. Developed in the late 19th century, it distinguishes acid-fast organisms that retain the primary dye despite acid decolorization from non-acid-fast bacteria that do not.^[61] This method remains a cornerstone in microbiology for rapid detection of pathogens resistant to conventional staining due to their waxy cell envelopes.^[62] The procedure for the classic Ziehl-Neelsen method begins with preparing a smear from a clinical specimen, such as sputum, which is air-dried and heat-fixed. The slide is flooded with carbol fuchsin dye containing phenol as a mordant and gently heated to steaming for about 5 minutes to facilitate dye penetration, with intermittent addition of dye to prevent evaporation. After cooling, the slide is decolorized with acid-alcohol (typically 3% hydrochloric acid in 95% ethanol) for 15-20 seconds until no more color runs off, then rinsed and counterstained with methylene blue for 30-60 seconds. Acid-fast bacteria appear red or pink against a blue background of non-acid-fast cells under light microscopy.^[61]^[2] The mechanism relies on the unique composition of acid-fast bacterial cell walls, which contain long-chain fatty acids called mycolic acids that form a lipid barrier impermeable to many stains. The carbol fuchsin, aided by heat and phenol, binds tightly to these mycolic acids, rendering the dye resistant to removal by acid-alcohol decolorization; thus, acid-fast cells retain the red color. In contrast, non-acid-fast bacteria lack this lipid layer, lose the primary dye during decolorization, and take up the blue counterstain.^[2]^[61] Historically, the technique originated from Paul Ehrlich's 1882 work on staining tubercle bacilli, but Franz Ziehl refined it in 1882 by introducing carbolic acid (phenol) as a mordant to enhance dye penetration without aniline oil. Friedrich Neelsen further modified it in 1883, substituting basic fuchsin in a phenol solution for better specificity and simplifying the process, establishing the standard Ziehl-Neelsen protocol.^[63]^[62] In applications, acid-fast staining is primarily used for diagnosing tuberculosis caused by Mycobacterium tuberculosis and leprosy caused by Mycobacterium leprae, where direct microscopy of sputum or tissue smears provides quick presumptive identification in resource-limited settings.^[64] It is especially valuable for pulmonary tuberculosis screening, as recommended by the World Health Organization for initial case detection.^[61] A notable variant is the Kinyoun method, introduced in 1915 as a "cold" procedure that eliminates heating by using a higher concentration of phenol (5%) in the carbol fuchsin to promote dye uptake, making it safer and easier for routine lab use while yielding similar results.^[62]^[61] In modern practice, acid-fast staining is often combined with auramine O or auramine-rhodamine fluorochrome dyes for fluorescence microscopy, where bacilli fluoresce yellow-green against a dark background, increasing sensitivity for detecting low bacillary loads (up to 10 times more than light microscopy) and reducing examination time. The Centers for Disease Control and Prevention recommends this fluorochrome method as the preferred approach for acid-fast bacilli detection in tuberculosis diagnostics.^[65]^[61] Interpretation involves examining the smear at 1000x magnification for red, rod-shaped bacilli, often appearing as straight or slightly curved rods with characteristic beading patterns indicative of M. tuberculosis. Positive results confirm acid-fast organisms, but paucibacillary cases, such as early leprosy or low-burden tuberculosis, may yield false negatives due to insufficient bacilli or improper smearing, necessitating culture confirmation./01:_Labs/1.14:_Acid-Fast_Stain)^[61]

Endospore Staining

Endospore staining is a differential microbiological technique designed to visualize the highly resistant, dormant endospores formed by bacteria in genera such as Bacillus and Clostridium, distinguishing them from surrounding vegetative cells. These endospores, with their tough coats composed of proteins, dipicolinic acid, and other protective layers, enable bacterial survival under extreme conditions like heat, radiation, and desiccation. The method is essential for identifying spore-forming pathogens and contaminants, as endospores do not stain well with standard procedures due to their impermeability.^[66] The history of endospore staining traces back to Wilhelm Dorner's 1922 method, which used carbol fuchsin as the primary stain applied with prolonged heating to penetrate spore structures, resulting in red endospores against a counterstained background. In 1933, A.B. Schaeffer and M. Fulton introduced a simplified variant, the Schaeffer-Fulton technique, replacing carbol fuchsin with malachite green for faster staining and better contrast, reducing the heating time while maintaining differential results. An earlier approach, the Wirtz-Conklin method from 1903 and later modified, employed similar heat-driven staining but with carbol fuchsin and nigrosin, though it was largely superseded by Schaeffer-Fulton's efficiency.^[66]^[67]^[68] The standard Schaeffer-Fulton procedure begins with preparing a thin bacterial smear on a clean glass slide, allowing it to air-dry, and heat-fixing it over a flame to adhere the cells. The slide is then flooded with 5% malachite green solution, and steam is applied gently for 3-5 minutes by passing the stained slide through a flame repeatedly, ensuring the dye penetrates the endospores without boiling the preparation. After cooling, the slide is rinsed thoroughly with cool water to remove excess primary stain from vegetative cells, followed by counterstaining with 0.5% safranin for 20-30 seconds, a final rinse, and air-drying before microscopic examination under oil immersion.^[66]^[67] The mechanism relies on the endospore's structural resistance: heat temporarily disrupts the impermeable spore coat, allowing malachite green—a small, cationic dye—to diffuse inward and bind to calcium-dipicolinate complexes and proteins within the core, forming a stable complex that resists subsequent washing. Vegetative cells, lacking this barrier, absorb the dye superficially and lose it during the water rinse, appearing unstained until the safranin counterstain imparts a pink-red color, creating high contrast where endospores appear bright green. This differential retention exploits the spore's low permeability and high dye affinity, a principle shared with other heat-assisted stains but unique to endospore visualization.^[67]^[69] In applications, endospore staining is widely used in clinical microbiology to confirm infections from spore-formers like Clostridium perfringens, which causes gas gangrene and food poisoning, or Bacillus anthracis, the agent of anthrax, by detecting characteristic spores in patient samples. In food safety, it identifies contaminants such as Bacillus cereus in dairy and rice products, where surviving endospores can germinate post-processing and produce emetic toxins, enabling rapid assessment of spoilage risks in canning and pasteurization validation. These uses underscore its role in preventing outbreaks, as spore detection guides decontamination protocols.^[70]^[71] Challenges arise from the endospores' extreme resistance, requiring aggressive steaming that risks slide breakage, uneven heating, or sample distortion, while incomplete penetration can lead to false negatives. Fluorescent alternatives, such as fluorescein isothiocyanate (FITC) labeling or two-color tagging with fluorescent D-amino acids, offer heat-free options for quicker, more sensitive detection in complex matrices like biofilms, though they demand specialized equipment and may not differentiate viability as clearly.^[72]^[73] For interpretation, stained preparations are viewed at 1000x magnification, where green endospores stand out against pink vegetative cells; free-lying spores indicate lysis of the sporangium. Spore position within the cell—central (e.g., Bacillus anthracis), subterminal (Clostridium botulinum), or terminal with swelling (Clostridium tetani)—provides taxonomic clues for species differentiation, aiding precise identification in diagnostic settings.^[66]^[71]

Romanowsky-Type Staining

Romanowsky-type stains, a family of polychromatic dyes developed for microscopic examination of blood and bone marrow, originated from the work of Russian physician Dmitri Leonidovich Romanowsky in 1891, who first combined aged methylene blue with eosin to selectively stain malaria parasites and blood cells, producing distinctive purple hues in nuclei.^[74] This breakthrough, known as the Romanowsky effect, enabled differentiation of cellular components through metachromatic staining, where oxidation products of methylene blue (such as azure B) interact with eosin Y to generate varied colors. Subsequent refinements, including Leishman's 1901 method using methanol as a solvent for faster application, solidified their role in hematology and parasitology.^[75] The standard procedure begins with methanol fixation of air-dried blood or bone marrow smears to preserve cellular morphology and prevent autolysis.^[76] The stain solution, typically a mixture of oxidized methylene blue derivatives (azure A, B, or C), methylene blue, and eosin Y dissolved in methanol or buffered water, is then applied for 5-30 minutes, followed by rinsing in buffered water (pH 6.8-7.2) to develop the colors and drying. For example, in Wright's stain, the dyes are pre-mixed to form azures in situ through partial oxidation, ensuring consistent precipitation of dye complexes.^[77] This process relies on the cationic azures binding to acidic nuclear material and anionic eosin to basic cytoplasmic components, with pH control critical to avoid over- or under-staining. The mechanism involves the Romanowsky-Giemsa effect, where azure B-eosin complexes form slowly, leading to template intensification on polyanionic substrates like DNA in nuclei, resulting in purple staining, while ribosomes in cytoplasm bind free azure for blue tones and hemoglobin accepts eosin for pink. Granules in leukocytes exhibit varied colors—purple in neutrophils due to enhanced complex binding, red in eosinophils from eosin affinity, and blue in basophils from azure selectivity—allowing precise differentiation. This differential affinity, enhanced by methanol's role in dye solubilization and fixation, provides high-contrast visualization without requiring separate acidic and basic dyes.^[76] These stains are primarily applied in differential white blood cell counts, where they distinguish granulocytes, lymphocytes, and monocytes based on cytoplasmic and nuclear morphology in peripheral blood smears.^[76] They are also essential for detecting malaria parasites, as the chromatin stains red-purple and cytoplasm blue, facilitating species identification in thick and thin films per WHO guidelines.^[76] In bone marrow analysis, they reveal hematopoietic cell lineages and abnormalities. Key variants include Giemsa stain, optimized for parasite detection with added glycerol for stability and superior contrast in malaria diagnostics; Wright's stain, widely used in automated hematology for rapid WBC differentials; Leishman's stain, a buffered methanol-based version for quick manual staining; and Jenner's stain, employed in cytology for enhanced azure content to highlight nuclear details.^[76] Each maintains the core azure-eosin-methylene blue composition but varies in oxidation levels and solvents for specific needs. Interpretation focuses on morphological features indicative of disorders, such as Auer rods—needle-like azurophilic inclusions staining red-purple in promyelocytes—which are pathognomonic for acute myeloid leukemia subtypes like acute promyelocytic leukemia.^[78] In leukemia, abnormal blast cell granulation or nuclear irregularities become evident, aiding classification and monitoring treatment response through serial smears.^[79]

Histological and Cytological Techniques

Haematoxylin and Eosin Staining

Haematoxylin and eosin (H&E) staining is the most widely used technique in histology for routine examination of tissue sections, providing contrast between cellular components to facilitate pathological diagnosis.^[1] In this method, haematoxylin imparts a blue or purple color to basophilic structures such as cell nuclei, while eosin stains eosinophilic components like cytoplasm and extracellular matrix in shades of pink or red.^[80] This differential staining highlights nuclear-cytoplasmic contrast, enabling assessment of tissue architecture and cellular morphology essential for identifying abnormalities such as malignancies.^[81] The standard H&E procedure begins with dewaxing paraffin-embedded tissue sections using xylene for 2 minutes twice, followed by rehydration through graded ethanols (100% for 2 minutes twice, 95% for 2 minutes) and a water rinse.^[81] Sections are then stained with haematoxylin for 3-5 minutes to color nuclei, rinsed in water, differentiated in a mild acid solution (such as 0.5-1% hydrochloric acid in 70% ethanol) for 1 minute to remove excess stain, and blued in an alkaline solution (like Scott's tap water substitute) for 1 minute to stabilize the blue hue.^[81] Eosin Y is applied for 30-45 seconds to stain cytoplasm and extracellular elements pink, followed by brief rinses in 95% ethanol, dehydration in 100% ethanol (1 minute twice), clearing in xylene (2 minutes twice), and mounting with a coverslip.^[81] This process typically takes 10-15 minutes per slide and requires fixed, paraffin-embedded tissues sectioned at 4-5 micrometers.^[1] The mechanism of H&E staining relies on the chemical properties of the dyes and their interactions with tissue. Haematoxylin, derived from the logwood tree, is oxidized to hematein, which forms a complex with a mordant such as aluminum ions to bind electrostatically to negatively charged acidic components like DNA and RNA in nuclei, producing a basophilic blue-purple stain.^[24] Eosin, an acidic xanthene dye, binds to basic proteins in the cytoplasm and extracellular matrix, imparting an eosinophilic pink coloration through ionic interactions.^[1] The pH of solutions is critical: acidic conditions favor eosin binding, while alkaline bluing enhances haematoxylin stability.^[24] The history of H&E staining traces back to the mid-19th century, with haematoxylin first used histologically in 1863 by Waldeyer-Hartz for neuronal axons and refined in 1865 by Böhmer with alum mordant for better tissue staining.^[82] Eosin was synthesized in 1874 and applied to tissues by Fischer in 1876, with the combination of the two dyes introduced by Wissozky in 1877 for embryonic tissues.^[82] Further refinements in the 1880s and 1890s by Paul Mayer, including his progressive mucihematein method using sodium iodate oxidation and aluminum chloride mordant, established standardized protocols still in use today.^[83] Variants of H&E staining include progressive and regressive methods, which differ in controlling staining intensity. In progressive staining, such as with Mayer's or Gill's formulations, tissues are exposed to haematoxylin for a timed duration without aggressive differentiation, allowing even staining of nuclei and some background elements like mucin.^[24] Regressive staining, exemplified by Harris' haematoxylin, involves overstaining followed by acid-alcohol differentiation to sharpen nuclear detail by removing excess dye from cytoplasm.^[24] These variants are selected based on tissue type and desired contrast, with progressive methods suiting delicate structures.^[81] H&E staining is primarily applied in general pathology for evaluating biopsies, surgical resections, and autopsies, where it serves as the initial diagnostic tool for tumor grading and assessing malignancy through nuclear pleomorphism and cytoplasmic features.^[80] Interpretation focuses on the blue-stained nuclei for signs of hyperchromasia or irregularity indicating cancer, contrasted against pink cytoplasm and stroma to delineate tissue organization.^[81] Globally, it processes millions of slides annually, forming the foundation of histopathological reports.^[24]

Papanicolaou Staining

The Papanicolaou stain, commonly known as the Pap stain, is a multichromatic cytological staining technique designed to highlight nuclear and cytoplasmic details in exfoliated cells, enabling the detection of precancerous and cancerous changes. Developed by Greek-American anatomist George N. Papanicolaou in the early 20th century, it revolutionized cervical cancer screening by allowing non-invasive examination of vaginal and cervical cells. Papanicolaou first presented his method for diagnosing uterine cancer through vaginal smears in 1928 at a conference, but it gained widespread recognition after his 1942 publication in Science detailing the staining procedure, followed by the seminal 1943 monograph co-authored with Herbert F. Traut, Diagnosis of Uterine Cancer by the Vaginal Smear.^[84]^[85] The procedure begins with wet fixation of freshly collected cells to preserve morphology and prevent drying artifacts, typically using 95% ethanol for 20–30 minutes on glass slides prepared from cervical scrapings, vaginal fluids, or other cytological samples. Staining involves progressive application of dyes: Harris or Gill's hematoxylin for 10–15 minutes to stain nuclei blue-purple, followed by differentiation in 0.5% acid alcohol to remove excess stain; then counterstaining with Orange G 6 (OG-6) to impart orange hues to keratinized cytoplasm, and modified Eosin Azure (EA), which includes eosin for pink non-keratinized elements and light green for additional cytoplasmic contrast. The slide is dehydrated through graded alcohols, cleared in xylene, and mounted for microscopic examination. This protocol, formalized in 1942, ensures sharp nuclear chromatin patterns and varied cytoplasmic tones for differentiation.^[86] The mechanism relies on differential solubility and affinity of the polychromatic dyes for cellular components under wet fixation conditions, which enhance cellular transparency and contrast without the rigidity of dry fixation methods. Hematoxylin binds to acidic nuclear structures like chromatin, while OG-6 and EA components selectively target cytoplasmic proteins and keratohyalin, producing a spectrum of colors—blue for nuclei, orange for mature squamous cells, green for endocervical cells, and pink for intermediate types—that reveal morphological abnormalities. This multichromatic approach, distinct from simpler histological stains like haematoxylin and eosin optimized for fixed tissues, is tailored for dispersed, unfixed cells to emphasize subtle cytological features.^[86]^[85] Primarily applied in cervical cancer screening through the Pap smear, the stain facilitates early detection of squamous intraepithelial lesions and adenocarcinomas by examining exfoliated cervicovaginal cells collected via spatula or brush. It is also used in sputum cytology for lung cancer evaluation and in body fluid analyses for other malignancies, with high sensitivity for identifying dysplastic changes when combined with clinical correlation. Unlike carbohydrate-specific stains such as periodic acid-Schiff, the Pap stain provides broad cytological contrast for routine screening rather than targeting particular biomolecules.^[87]^[88] Interpretation focuses on nuclear atypia, such as enlargement, hyperchromasia, irregular contours, and increased nuclear-to-cytoplasmic ratios, alongside cytoplasmic patterns like keratinization (orange maturation) or metaplastic changes (greenish hues), which indicate dysplasia, carcinoma in situ, or invasive cancer. Normal cells show uniform, small nuclei with balanced cytoplasm, while malignant features include prominent nucleoli and disordered arrangements; results are classified using systems like the Bethesda System for standardized reporting.^[87]^[89] Updates since the 1990s include liquid-based cytology (LBC) preparations, such as ThinPrep (introduced 1996) and SurePath, which suspend samples in methanol-based preservatives for automated monolayer slide production, reducing obscuring blood or mucus and improving diagnostic accuracy over conventional smears. LBC enhances staining uniformity, shortens processing time to about 30 minutes, and allows residual material for ancillary tests, though the core Pap dyes remain unchanged; these methods have become standard in global screening programs for better automation and reproducibility.^[90]^[91]

Periodic Acid-Schiff Staining

The Periodic Acid-Schiff (PAS) staining technique is a histochemical method designed to visualize polysaccharides, mucosubstances, and related structures in tissue sections by producing a magenta coloration specific to carbohydrate-rich components.^[92] Introduced by McManus in 1946 for the demonstration of mucin in histological preparations, the method involves treating fixed tissue with periodic acid followed by Schiff's reagent.^[92] Hotchkiss provided a detailed microchemical description in 1948, emphasizing its application to fixed tissues and clarifying the reaction's specificity for polysaccharide structures.^[93] This technique has become a standard in histological and cytological analysis due to its sensitivity for detecting 1,2-glycol groups in carbohydrates. The procedure begins with deparaffinized and rehydrated tissue sections, which are oxidized using a 0.5-1% aqueous solution of periodic acid for 5-10 minutes to generate aldehyde groups from vicinal diols in polysaccharides.^[94] Excess periodic acid is rinsed away, and the sections are then immersed in Schiff's reagent—a solution of basic fuchsin decolorized with sulfurous acid—for 15-30 minutes, resulting in a purple-magenta reaction product at sites of aldehyde formation.^[93] Sections are briefly treated with sodium bisulfite to remove unbound reagent, followed by counterstaining with haematoxylin to highlight nuclei in blue.^[95] The mechanism relies on periodic acid's oxidative cleavage of carbon-carbon bonds in adjacent hydroxyl groups of sugars (e.g., in glycogen or mucins), forming dialdehydes that bind covalently to the hydrazino groups in Schiff's reagent, producing the characteristic chromogenic complex.^[94] This reaction is particularly effective for neutral polysaccharides, as the aldehydes react quantitatively with the leuco-fuchsin dye.^[93] PAS staining is widely applied to identify glycogen deposits in liver tissues, where it reveals intracellular accumulations as magenta granules, aiding diagnosis of glycogen storage diseases.^[96] In renal pathology, it highlights basement membranes in the kidney glomeruli, delineating structures like the glomerular basement membrane in conditions such as diabetic nephropathy.^[95] Additionally, it is valuable for identifying fungal elements in tissue sections, as the thick polysaccharide walls of fungi stain intensely magenta, facilitating detection in infections like candidiasis.^[95] Interpretation focuses on the intensity and distribution of magenta staining, which correlates with polysaccharide abundance; for instance, excessive glycogen staining in hepatocytes indicates storage disorders, while diastase predigestion can differentiate glycogen (which digests away) from other PAS-positive materials like mucins.^[96] Despite its utility, PAS staining has limitations, including non-specific reactivity with certain neutral mucins and glycoproteins, which may lead to over-staining in some epithelial tissues without additional controls.^[95] It does not distinguish between different types of carbohydrates without complementary techniques, and background staining can occur if rinsing steps are inadequate.^[94] Counterstains such as haematoxylin are essential to provide morphological context, often complementing haematoxylin and eosin (H&E) as a baseline for overall tissue architecture.^[95]

Masson's Trichrome Staining

Masson's trichrome staining is a histological technique designed to differentiate collagen fibers from muscle and other connective tissues in tissue sections. Developed by Canadian pathologist Claude L. Pierre Masson in 1929, it builds on earlier trichrome methods by incorporating a sequence of dyes that provide high-contrast visualization of extracellular matrix components.^[97] The method is widely used in pathology to evaluate fibrotic changes, where excessive collagen deposition indicates disease progression.^[98] The standard procedure begins with fixation of tissue sections in Bouin's solution to enhance dye affinity, typically for 6 hours at room temperature or 2 hours at 56°C, followed by rinsing in tap water for 10 minutes.^[98] Sections are then stained with Weigert's iron hematoxylin for 10 minutes to label nuclei black, rinsed, and immersed in Biebrich scarlet-acid fuchsin solution for 10 minutes to stain muscle fibers and cytoplasm red.^[98] Differentiation occurs through incubation in phosphotungstic-phosphomolybdic acid for 15 minutes, which removes excess red dye from collagen, allowing subsequent staining with aniline blue for 5 minutes to render collagen blue.^[98] Slides are washed, dehydrated in graded ethanol and xylene, and mounted for microscopic examination.^[98] The mechanism relies on selective dye binding properties: the iron mordant in Weigert's hematoxylin forms a stable complex with nuclear chromatin for black staining, while the acidic dyes Biebrich scarlet-acid fuchsin bind preferentially to cytoplasmic proteins and muscle due to their basic nature.^[98] Phosphotungstic and phosphomolybdic acids act as mordants that block non-collagenous sites, enabling aniline blue—an acidic dye—to bind specifically to collagen fibers, resulting in the characteristic color differentiation (nuclei black, muscle red, collagen blue).^[98] This selectivity arises from differences in tissue pH, charge, and protein composition, allowing clear demarcation of connective tissue elements.^[98] In applications, Masson's trichrome is essential for assessing fibrosis in organs such as the liver and kidney, where blue-stained collagen highlights fibrotic bands amid red parenchyma.^[99]^[100] For instance, in liver pathology, it quantifies collagen accumulation in cirrhosis, aiding in staging disease severity by revealing nodular patterns and bridging fibrosis.^[99] It also supports wound healing studies by visualizing collagen remodeling in scar tissue, distinguishing mature blue fibers from immature red granulation tissue.^[101] Interpretation involves quantifying the blue-stained collagen area relative to total tissue, often via image analysis, to gauge fibrosis extent; for example, increased blue intensity in kidney sections correlates with interstitial fibrosis progression.^[100] In cirrhosis evaluation, the stain differentiates regenerative nodules from fibrotic septa, providing a visual metric for pathological grading without advanced imaging.^[99] Variants adapt the protocol for specific section types, such as paraffin-embedded tissues requiring deparaffinization prior to Bouin's fixation, or frozen sections that omit fixation to preserve antigenicity while adjusting incubation times to 5-10 minutes per step for optimal contrast.^[98] These modifications maintain the core dye sequence but optimize for tissue preservation and processing speed.^[98]

Special and Advanced Techniques

Silver Staining Methods

Silver staining methods encompass a family of histological techniques that utilize silver impregnation to visualize delicate neural and connective tissue structures, particularly nerve fibers and reticular fibers. These methods originated in the late 19th century with Camillo Golgi's development of the rapid Golgi method in 1873, which selectively impregnated neurons using silver chromate to reveal their morphology in three dimensions.^[102] Subsequent refinements, such as Max Bielschowsky's 1904 modification, extended the approach to impregnate a broader range of neural elements, including axons and neurofibrils, by employing silver nitrate reduction.^[103] In 1932, Norman C. Foot introduced a silver impregnation technique specifically for reticulin fibers, enhancing visualization of fine connective tissue networks in pathological contexts.^[104] The core procedure in methods like Bielschowsky's involves several key steps: tissue sections are first fixed in formalin and sensitized in silver nitrate solution, followed by immersion in ammoniacal silver to form a silver-protein complex that binds to target structures.^[105] Development occurs through reduction with a hydroquinone-formaldehyde mixture, depositing metallic silver as black precipitates along fibers, and gold toning with gold chloride stabilizes the stain while imparting a brownish hue to non-neural elements.^[106] Foot's method similarly uses ammoniacal silver nitrate but emphasizes surface flotation of sections for uniform impregnation of reticulin, with reduction yielding black reticular fibers against a golden-brown collagen background.^[107] Mechanistically, these techniques rely on argyrophilic reactions, where tissue components such as neurofilaments and reticulin fibers act as reducing agents or nucleators for silver ions (Ag⁺), which are then reduced to metallic silver (Ag⁰) by an external developer, forming visible black deposits.^[108] Unlike argentaffin reactions, which involve direct tissue reduction without a developer, argyrophilic processes require the latter for selective enhancement, though the exact binding sites—potentially sulfhydryl groups or unsaturated bonds—remain partially understood.^[103] This results in high-contrast imaging of fine structures that are otherwise translucent in routine stains. In neurohistology, silver methods excel at delineating axons and degenerating neural processes, aiding diagnosis of neuropathologies like Alzheimer's disease where neurofibrillary tangles appear as argyrophilic masses.^[103] For reticular structures, they highlight fine connective tissue networks in pathological contexts.^[104] Despite their utility, silver staining methods suffer from non-specificity, as silver deposition can occur artifactually on non-target elements like myelin or erythrocytes, complicating reliable quantification.^[109] Modern alternatives, such as immunohistochemistry with antibodies against neurofilament proteins or collagen IV for basement membranes, offer greater specificity and reproducibility, often supplanting silver techniques in routine diagnostics.^[103]

Sudan Dye Staining

Sudan dyes are a class of fat-soluble azo dyes employed in histological techniques to visualize neutral lipids, such as triglycerides and cholesterol esters, within tissue sections under light microscopy. These dyes, including Sudan III, Sudan IV, and Oil Red O, exhibit high affinity for non-polar lipid structures due to their lipophilic nature, producing characteristic orange-red to red coloration in lipid-laden areas. Unlike ionic stains, Sudan dyes operate through physical dissolution rather than chemical binding, making them particularly useful for demonstrating intracellular and extracellular fat accumulations in frozen or specially prepared specimens.^[110]^[111] The historical development of Sudan dye staining traces back to the early 20th century, with significant contributions from James Lorrain Smith, who explored the staining properties of fats and lipoids using Sudan III in alcoholic solutions. In his 1911 work, Smith demonstrated that these dyes selectively dissolve into lipid droplets, distinguishing them from other tissue components, which laid foundational principles for lipid histochemistry. Subsequent refinements, such as the introduction of Oil Red O by French in 1926, expanded the palette of available Sudan-type dyes for more vivid and specific lipid visualization in pathology.^[112]^[113] The standard procedure for Sudan dye staining requires unfixed or formalin-fixed frozen sections, as lipid extraction occurs during paraffin embedding, precluding its use in routine paraffin-processed tissues. Tissues are typically snap-frozen in isopentane cooled by liquid nitrogen, sectioned at 5-10 μm, and mounted on slides. The sections are then immersed in a staining solution of the dye—such as 0.5% Sudan III or IV in 70% ethanol, or Oil Red O in a propylene glycol-ethanol mixture—for 5-15 minutes at room temperature, allowing the dye to partition into lipid phases. Excess dye is differentiated in 70% ethanol, followed by rinsing in water and counterstaining with hematoxylin for nuclear detail; the slides are mounted in aqueous media to preserve the lipid-dye complex.^[114]^[115]^[116] The mechanism of Sudan dye staining relies on the non-ionic, lysochrome properties of these dyes, which are more soluble in the hydrophobic environment of lipid droplets than in the aqueous or alcoholic solvent. Upon application, the dye molecules diffuse from the solvent into triglycerides and other neutral lipids, imparting an orange-red hue (Sudan III/IV) or bright red (Oil Red O) due to the azo chromophore's absorption spectrum. This solubility-driven process avoids covalent interactions, ensuring reversibility and specificity for unbound or loosely bound lipids, while phospholipids and cholesterol may stain less intensely.^[110]^[111]^[115] In pathological applications, Sudan staining is essential for identifying lipid accumulations in conditions like atherosclerosis, where Sudan IV highlights cholesterol clefts and foam cells in aortic plaques, aiding in the assessment of plaque vulnerability. It is also routinely used to detect hepatic steatosis, revealing macro- or microvesicular fat droplets in liver biopsies from non-alcoholic fatty liver disease. Additionally, the technique visualizes lipid stores in the adrenal cortex, distinguishing normal zonation from pathological alterations in steroidogenic tissues.^[117]^[118]^[118] Interpretation of Sudan-stained sections focuses on the size, distribution, and morphology of stained droplets to infer pathological significance; for instance, large, coalescent droplets suggest macrosteatosis in liver disease, while numerous small, foamy vacuoles in macrophages indicate lipid storage disorders like Niemann-Pick disease. The intensity and uniformity of staining correlate with lipid content, with positive controls (e.g., adipose tissue) ensuring reliability, though over-differentiation can lead to false negatives.^[118] Variants of Sudan staining include adaptations for specific lipid types, such as Sudan Black B, which is dissolved in propylene glycol and stains myelin sheaths black due to its affinity for phospholipids in frozen sections. This variant is particularly valuable for demonstrating demyelination or remyelination in neurological tissues, offering a non-toxic alternative to older methods while requiring similar frozen preparation to avoid lipid loss. Unlike the standard orange-red dyes, Sudan Black provides higher contrast for bound lipids but may require longer differentiation to minimize background.^[119]^[120]

Fluorescent Staining Techniques

Fluorescent staining techniques utilize fluorophores that absorb light at specific excitation wavelengths and emit light at longer emission wavelengths, enabling the visualization of biological structures under fluorescence microscopy. These methods rely on the principle of fluorescence, where molecules are excited by light energy and return to their ground state by emitting photons, producing a detectable signal. This process, known as the Stokes shift, separates the excitation and emission spectra, allowing for selective imaging with minimal background interference.^[121]^[10] The development of fluorescent staining began in the early 1940s when Albert Coons introduced immunofluorescence by conjugating fluorescent molecules to antibodies, marking the first use of fluorescence for specific biomolecular labeling in tissues. This breakthrough laid the foundation for targeted cellular imaging. In the 1990s, the cloning and expression of green fluorescent protein (GFP) from the jellyfish Aequorea victoria revolutionized the field, allowing genetic fusion of fluorescent tags to proteins for non-invasive tracking in living organisms.^[122]^[123] In typical procedures, fluorophores are applied to samples through direct binding, intercalation, or genetic incorporation, followed by illumination with excitation light via epifluorescence microscopy setups that use dichroic mirrors and emission filters to isolate the fluorescent signal. The mechanism involves fluorophore attachment to target molecules, such as through intercalation into DNA double helices, which positions the fluorophore for efficient light-induced emission upon excitation. This binding enhances specificity, as the fluorophore's quantum yield increases in the bound state, producing brighter signals for detection.^[124]^[125]^[10] Key techniques include fluorescence in situ hybridization (FISH), which employs fluorescently labeled nucleic acid probes to hybridize with specific DNA or RNA sequences on chromosomes, enabling precise localization of genetic material in fixed cells. Another prominent method is multiplexing in flow cytometry, where multiple fluorophores with distinct emission spectra allow simultaneous analysis of various cellular markers in suspension, facilitating high-throughput phenotyping of cell populations.^[126]^[127]^[128]^[129] Applications of fluorescent staining span live-cell imaging and diagnostic assays, such as tracking dynamic cellular processes like migration and division in real time without fixation. For apoptosis detection, the TUNEL assay incorporates fluorescent labels into DNA strand breaks, quantifying cell death in tissues or cultures through epifluorescence or confocal microscopy. These techniques provide spatiotemporal resolution essential for studying developmental biology and pathology.^[130]^[131] Recent advances up to 2025 include the integration of CRISPR-compatible fluorescent probes, which enable precise genome editing visualization by linking Cas proteins with self-labeling fluorophores for real-time monitoring of editing events in live cells. Super-resolution techniques like stimulated emission depletion (STED) microscopy have further enhanced resolution beyond the diffraction limit, achieving nanoscale imaging of fluorescently stained structures in tissues by depleting emission in peripheral regions of the excitation spot. These developments expand the utility of fluorescent staining in complex biological systems.^[132]^[133]

Immunohistochemical Staining

Immunohistochemical staining, or immunohistochemistry (IHC), is a technique that utilizes antibodies to detect specific antigens in tissue sections, enabling the visualization of protein expression at cellular and subcellular levels. This method relies on the high specificity of antigen-antibody interactions to localize targets such as proteins, receptors, or pathogens within fixed tissues. IHC has become indispensable in pathology for providing diagnostic, prognostic, and therapeutic insights, particularly in oncology and infectious diseases.^[134] The origins of IHC trace back to the 1940s with the development of fluorescent-labeled antibodies by Albert Coons, but the modern enzymatic approach was pioneered in the 1960s by Paul K. Nakane and G. Barry Pierce, who introduced enzyme-conjugated antibodies for light and electron microscopy. Their seminal work demonstrated the preparation of peroxidase- and alkaline phosphatase-labeled antibodies, allowing stable chromogenic detection without the need for fluorescence microscopy. This innovation overcame limitations of earlier fluorescent methods, such as rapid photobleaching, and laid the foundation for routine clinical use of IHC in tissue sections. The standard IHC procedure begins with tissue fixation, typically in formalin, followed by paraffin embedding, sectioning, and deparaffinization to expose antigens. Antigen retrieval, often via heat or enzymatic methods, is performed to reverse fixation-induced masking. A primary antibody specific to the target antigen is then applied, binding selectively to the epitope. This is followed by a secondary antibody, commonly biotinylated or directly enzyme-linked (e.g., horseradish peroxidase, HRP), which amplifies the signal. The enzyme catalyzes a substrate reaction, such as 3,3'-diaminobenzidine (DAB) with HRP, producing a visible brown precipitate at antigen sites. Finally, a counterstain like hematoxylin is added to highlight nuclei, completing the process.^[135] At its core, IHC exploits the lock-and-key specificity of antibodies to antigens, with signal amplification achieved through secondary reagents and enzymatic reporters that generate detectable products proportional to antigen abundance. This indirect detection enhances sensitivity, allowing visualization of low-expression targets via avidin-biotin complexes or polymer-based systems that recruit multiple enzyme molecules per primary antibody. The resulting chromogenic or fluorescent output provides spatial information on antigen distribution, distinguishing it from bulk assays like ELISA.^[136] In clinical applications, IHC is widely used for identifying tumor markers, such as HER2 in breast cancer, where overexpression guides targeted therapies like trastuzumab. Positive HER2 staining, defined as strong complete membranous reactivity in over 10% of tumor cells (IHC score 3+), indicates amplification and eligibility for treatment, as established by guidelines from the American Society of Clinical Oncology. Additionally, IHC detects infectious agents in tissues, such as viral proteins in cytomegalovirus or bacterial antigens in tuberculosis, aiding rapid diagnosis when cultures are inconclusive.^[137] Interpretation of IHC relies on evaluating staining patterns, intensity, and distribution to inform diagnostics. Membranous staining, as seen in HER2-positive cases, suggests cell surface receptor localization and is prognostic for aggressive tumors, while cytoplasmic patterns indicate intracellular proteins like cytokeratins, helping classify carcinoma subtypes. Nuclear staining, conversely, points to transcription factors such as estrogen receptor. Pathologists score these qualitatively (e.g., 0 to 3+) or semi-quantitatively, considering background and controls to avoid false positives from non-specific binding.^[138] Recent advances in IHC include multiplex techniques developed in the 2010s, enabling simultaneous detection of multiple antigens in a single tissue section using tyramide signal amplification and spectral imaging to avoid cross-reactivity. These methods, such as Opal multiplex IHC, allow profiling of immune checkpoints and tumor microenvironments, enhancing immunotherapy response prediction. Complementing this, digital pathology tools now quantify staining via image analysis algorithms, measuring parameters like H-score (combining intensity and positivity percentage) with high reproducibility, reducing inter-observer variability in large-scale studies.

Common Biological Stains

Basic Fuchsin and Crystal Violet

Basic fuchsin and crystal violet are both synthetic cationic dyes widely employed in biological staining due to their affinity for negatively charged cellular components. Basic fuchsin, also known as fuchsine or rosaniline hydrochloride, appears as a dark green powder that dissolves in water to yield a magenta solution, while crystal violet, or gentian violet, forms a similar violet hue in aqueous media. These dyes are essential in microbiological and histological protocols for enhancing contrast in tissue and microbial samples.^[139]^[140] Chemically, both belong to the triarylmethane class of dyes, characterized by a central carbon atom bonded to three aryl groups, which imparts their intense coloration through resonance stabilization. As cationic dyes, they carry a positive charge at neutral pH, enabling pH-sensitive electrostatic binding to acidic structures such as phosphate groups in nucleic acids and sulfate-rich polysaccharides. This interaction is most effective in slightly acidic to neutral environments, where the dyes remain protonated and soluble, but binding can shift at higher pH due to deprotonation and potential aggregation.^[141]^[142]^[143] In applications, crystal violet serves as the primary stain in bacterial differentiation techniques, where it penetrates and binds to peptidoglycan in cell walls, allowing classification of Gram-positive bacteria that retain the purple complex after decolorization. Basic fuchsin, in decolorized form as Schiff's reagent, is integral to periodic acid-Schiff (PAS) variants, where it reacts with aldehyde groups generated from polysaccharides in fungal cell walls, rendering hyphae and spores magenta for identification in tissue sections. These uses highlight their role in targeting microbial structures without requiring complex mordants in basic protocols.^[3]^[144]^[94] Preparation typically involves dissolving the dyes in alcohol to create stock solutions, which are then diluted in water for working concentrations. For basic fuchsin, a common stock is 1 g dissolved in 10 mL of absolute ethanol, yielding a 10% solution stable for up to three months when filtered and stored in amber bottles to minimize photodegradation. Crystal violet stocks are similarly prepared at 2 g in 20 mL of 95% ethanol, with stability enhanced by protection from light, as exposure can cause fading through oxidative breakdown of the chromophore. These alcoholic bases ensure solubility and prevent precipitation in aqueous dilutions used for staining.^[145]^[146]^[147] Toxicity concerns arise from their aniline-derived origins, with basic fuchsin classified as possibly carcinogenic to humans (IARC Group 2B) due to genotoxic effects observed in animal studies, necessitating handling with gloves and in well-ventilated areas. Crystal violet exhibits teratogenic potential and acts as a mitotic poison, promoting tumor growth in certain models. Both dyes display metachromasia, a phenomenon where binding to polyanionic substrates like heparin or amyloid alters their absorption spectrum, shifting from violet/magenta to green or red, which can complicate interpretations if not controlled. Historically, these dyes trace to mid-19th-century aniline synthesis; basic fuchsin was developed in 1858 by François-Emmanuel Verguin through oxidation of aniline mixtures, marking it as the second major synthetic dye after mauveine.^[148]^[149]^[150]^[151]^[152] Their specificity stems from strong affinity for nucleic acids in simple staining methods, where crystal violet and basic fuchsin intercalate or electrostatically adhere to DNA and RNA phosphates, uniformly tinting bacterial and eukaryotic cells purple or magenta without differentiation. This binding is particularly pronounced in unfixed smears, providing rapid visualization of morphology, though excess dye can lead to overstaining. In duplex DNA contexts, these triarylmethane structures form stable complexes, underscoring their utility in basic protocols over more selective fluorescent alternatives.^[143]^[153]

Eosin and Haematoxylin

Eosin Y is an acidic xanthene dye that selectively binds to basic proteins in the cytoplasm and extracellular matrix, imparting a pink to red coloration in histological preparations.^[154] Derived from fluorescein, it exhibits high solubility in ethanol and water when in its sodium salt form, enabling its use as a counterstain in routine tissue sections.^[155] Haematoxylin, in contrast, is a natural compound extracted from the heartwood of the logwood tree (Haematoxylum campechianum), which must be oxidized to its active form, hematein, to function as a nuclear stain.^[156] This oxidation process, often facilitated by sodium iodate or aerial exposure, produces a dye that forms complexes with metal ions for enhanced affinity to DNA and RNA in cell nuclei.^[157] Mordanting is essential for haematoxylin's nuclear staining efficacy, as hematein alone lacks sufficient tissue affinity; aluminum or iron salts are commonly employed to create stable dye-metal complexes. Aluminum salts, such as ammonium or potassium alum, form alum hematoxylins that bind progressively to chromatin, yielding a blue-purple nuclear stain upon bluing.^[158] Iron salts, like ferric ammonium sulfate, produce iron hematoxylins that enable regressive staining, where overstaining is followed by differentiation to sharpen nuclear detail, often resulting in a darker, more intense blackish-blue hue.^[159] These mordants enhance the dye's electrostatic interactions with negatively charged nucleic acids, ensuring selective nuclear targeting.^[160] In applications, eosin Y stains cytoplasmic components, collagen, and muscle fibers pink, providing contrast to the blue-stained nuclei achieved with mordanted haematoxylin, as seen in the standard H&E procedure for routine histology.^[81] This combination highlights cellular architecture, with eosinophilic structures like erythrocytes and fibrin appearing vividly red, while haematoxylin delineates nuclear morphology for diagnostic purposes in pathology.^[161] Eosin serves primarily as a counterstain, balancing the basophilic nuclear tint without overwhelming tissue details.^[29] Variations in haematoxylin formulations distinguish alum-based progressive stains, which require controlled exposure time for optimal nuclear intensity without differentiation, from iron-based regressive ones that demand acid-alcohol destaining for precision.^[157] Progressive alum hematoxylins, such as Mayer's or Ehrlich's, offer stability and ease in high-throughput labs, while iron variants like Heidenhain's provide sharper contrast for research-oriented nuclear studies.^[162] Post-staining stability of haematoxylin is maintained through bluing agents, which shift the initial red-purple nuclear color to a stable blue by adjusting pH to alkaline levels, preventing fading during dehydration or mounting.^[157] Common agents include Scott's tap water substitute (a sodium bicarbonate and magnesium sulfate solution) or lithium carbonate, applied for 30-60 seconds to ensure color permanence without tissue distortion.^[81] These reagents enhance archival quality, with lithium carbonate offering particularly robust bluing for alum hematoxylins.^[163]

Fluorescent Dyes

Fluorescent dyes are vital tools in biological staining, enabling high-contrast visualization of cellular components through emission of light at specific wavelengths upon excitation. These dyes typically bind to nucleic acids, with fluorescence intensity increasing dramatically upon binding, allowing for sensitive detection in techniques such as fluorescence microscopy and flow cytometry. Key examples include DAPI and Hoechst dyes for nuclear staining, acridine orange for differentiating DNA and RNA, and propidium iodide for assessing cell viability.^[164] DAPI (4',6-diamidino-2-phenylindole) is a widely used minor groove-binding dye that preferentially targets AT-rich regions of double-stranded DNA, exhibiting excitation at approximately 358 nm and blue emission at 461 nm. This binding enhances fluorescence up to 20-fold compared to the free dye, making it ideal for labeling cell nuclei without significant RNA interference. Hoechst dyes, such as Hoechst 33258 and 33342, share similar properties as cell-permeant bisbenzimide compounds, binding the DNA minor groove at AT-rich sequences with high affinity (Kd 1–10 nM) and emitting blue fluorescence (excitation ~360 nm, emission ~460 nm for Hoechst 33342), with a ~30-fold fluorescence increase upon binding. In contrast, acridine orange functions through intercalation into double-stranded DNA, producing green fluorescence (~525–530 nm emission), while its electrostatic interactions with single-stranded RNA yield red emission (~650 nm), enabling metachromatic differentiation of nucleic acids.^[165]^[164]^[166]^[167] The mechanisms of these dyes involve either intercalation, where the molecule inserts between base pairs and unwinds the DNA helix (as with acridine orange and propidium iodide), or groove binding, which occurs without helix distortion (as with DAPI and Hoechst dyes). Intercalators like propidium iodide bind DNA via stacking interactions, emitting red fluorescence (excitation 400–600 nm, emission 600–700 nm) but cannot penetrate intact cell membranes, thus selectively staining dead or damaged cells for viability assays. Photobleaching, the irreversible loss of fluorescence under prolonged excitation, is a key consideration; DAPI exhibits greater photostability when bound to DNA compared to Hoechst dyes, minimizing signal degradation during imaging.^[164]^[168]^[164] Applications of these dyes span cell cycle analysis, where DAPI combined with propidium iodide distinguishes phases based on DNA content, and viability assessments, with propidium iodide identifying non-viable cells by membrane permeability and acridine orange detecting early RNA degradation in apoptosis versus necrosis. DAPI and Hoechst are employed for nuclear counterstaining in live and fixed cells, supporting chromosome visualization and mitochondrial DNA localization. Ethidium bromide, an early intercalating dye introduced in the 1950s as a trypanocide and adapted for DNA staining by the 1960s, was pivotal in gel electrophoresis but has been largely phased out since the 1990s due to its mutagenicity from DNA intercalation, which can induce frameshift mutations.^[168]^[167]^[169]^[170] DAPI was first synthesized in 1971 in Otto Dann's laboratory at the University of Erlangen and gained prominence as a fluorescent stain in 1975 for identifying mitochondrial DNA in ultracentrifugation studies.^[171]^[172] Hoechst dyes were developed by Hoechst AG in the early 1970s, building on bisbenzimide chemistry for enhanced DNA specificity. Safer alternatives to ethidium bromide, such as SYBR Green and SYBR Safe introduced by Molecular Probes in the 1990s, bind DNA via minor groove or external interactions rather than intercalation, reducing mutagenic potential while maintaining comparable sensitivity for nucleic acid detection. These SYBR dyes exhibit green fluorescence upon binding and are non-carcinogenic at working concentrations, facilitating safer routine use in laboratories.^[166]^[173]

Other Notable Stains

Iodine-based stains have been employed in microscopy since the early 19th century, initially for detecting starch through a characteristic blue-black complex formation with amylose helices.^[174] The starch-iodine reaction, first documented in 1814, provided a foundational tool for carbohydrate visualization in plant tissues and food analysis.^[174] Lugol's iodine, a solution of iodine and potassium iodide, extends this utility by staining glycogen deposits in animal cells a reddish-brown to black, aiding in the identification of energy reserves in histological sections.^[175] Additionally, Lugol's iodine highlights chitin in fungal cell walls, producing a brownish coloration that differentiates fungal structures from other polysaccharides.^[176] Malachite green serves as a key stain for bacterial endospores in the Schaeffer-Fulton method, where heat application drives the green dye into the spore's resistant coat, yielding a bright green color against a red counterstained vegetative cell background.^[177] This technique exploits the spore's impermeability, requiring steaming to facilitate penetration.^[178] Beyond endospores, malachite green functions in vital staining of living bacterial cells, providing contrast without immediate toxicity at low concentrations, and as a negative stain alternative.^[179] Osmium tetroxide acts primarily as a fixative and stain for lipids in microscopy, reacting with unsaturated fatty acid double bonds to form black osmate esters that enhance contrast in membrane structures.^[180] Its reactivity with lipids makes it invaluable for preserving and visualizing fatty tissues, though its high volatility and toxicity necessitate fume hood use and careful handling to avoid respiratory and ocular irritation.^[180] Carmine, often in the form of mucicarmine, targets mucins—complex glycoproteins rich in carbohydrates—staining them red through aluminum-carmine complexes that bind acidic groups.^[181] This stain is particularly effective for epithelial mucins in glandular tissues. Alcian blue complements carmine by selectively staining acid mucins and sulfated glycoproteins blue at pH 2.5, distinguishing carboxylated and sulfated variants from neutral ones when combined with periodic acid-Schiff methods.^[181]

Applications and Considerations

Stainability of Biological Tissues

The stainability of biological tissues refers to the capacity of cellular and extracellular components to bind dyes, influenced by inherent compositional and structural properties that determine dye affinity, penetration, and retention. Tissue composition, including proteins, lipids, carbohydrates, and nucleic acids, varies across organs and cell types, leading to differential uptake of stains; for instance, hydrophilic dyes interact preferentially with aqueous environments in protein-rich matrices, while lipophilic dyes target fatty regions. These interactions are modulated by extrinsic factors during preparation, ensuring visibility under microscopy for diagnostic and research purposes.^[1] Key factors affecting stain uptake include pH, which alters dye ionization and binding; acidic conditions enhance certain anionic dyes like eosin, while alkaline pH favors basic dyes such as hematoxylin. Fixation duration impacts tissue permeability—prolonged exposure to fixatives like formalin cross-links proteins, potentially masking epitopes and reducing stain penetration, whereas under-fixation leads to tissue autolysis and uneven dyeing. Tissue density further complicates uptake, as compact structures like cartilage require thinner sections (typically 4-5 μm) for adequate dye diffusion, and fatty tissues resist aqueous-based stains due to their hydrophobic nature, necessitating lipid-specific solvents to avoid washout during processing.^[1]^[182]^[1] Tissue-specific variations highlight these challenges; in contrast, lipid-rich tissues like brain matter demand Sudan dyes, as their high fat content repels routine aqueous stains, leading to incomplete visualization without lipid-solubilizing agents. H&E remains the standard for general tissue morphology assessment despite these limitations.^[183]^[81] Endogenous autofluorescence poses a significant barrier in fluorescent staining, arising from natural fluorophores in collagen and elastin fibers, which emit green-yellow light under excitation and obscure specific signals; this is particularly problematic in connective tissues. Quenching agents, such as Sudan Black B or commercial blockers, effectively suppress this background by binding to lipofuscin and other emitters, improving signal-to-noise ratios without compromising target fluorescence.^[184]^[185]^[186] Pathological alterations, including inflammation, modify tissue stainability by increasing vascular and paracellular permeability, which enhances dye influx but can cause uneven distribution and artifacts due to edema or cellular infiltration. In inflamed states, mediators like histamine induce endothelial gaps, facilitating greater stain penetration into affected areas while diluting intensity in edematous regions.^[187]^[188] In research settings, spectrophotometry quantifies stain intensity by measuring absorbance spectra of tissue sections, correlating optical density with dye concentration to assess uptake variability across samples; this method establishes baselines for comparative studies, such as evaluating fixation effects on staining uniformity.^[189] To mitigate masking from fixation, enzyme pretreatments in immunohistochemical (IHC) protocols perform antigen retrieval by digesting cross-linked proteins—using proteases like proteinase K or pepsin—thereby exposing hidden epitopes and boosting stain binding efficiency, particularly in formalin-fixed tissues.^[190]

Staining in Electron Microscopy

Staining in electron microscopy (EM) relies on heavy metal compounds to provide contrast in transmission electron microscopy (TEM) by scattering electrons, as biological specimens are inherently low in electron density. These stains bind to cellular components, creating electron-dense deposits that reveal ultrastructural details invisible under light microscopy. The development of these techniques began in the 1950s with George Palade's pioneering work on buffered osmium tetroxide fixation, which improved tissue preservation and contrast for studying cellular organelles.^[191]^[192] Key techniques include en bloc staining with uranyl acetate during sample preparation and post-sectioning staining with lead citrate. Uranyl acetate, applied before dehydration, binds to nucleic acids, proteins, and membranes, enhancing overall contrast in epoxy-embedded sections.^[193]^[194] Lead citrate, introduced by Reynolds in 1963, is applied to ultrathin sections on grids after embedding, selectively staining proteins and providing fine-grained contrast without uranium's radioactivity concerns.^[195] Osmium tetroxide serves as both a fixative and stain, forming electron-dense deposits on lipids, particularly unsaturated bonds in membranes, which appear as dark lines in bilayer profiles.^[196]^[197] These methods enable detailed visualization of organelles, such as mitochondria and endoplasmic reticulum, and viruses, where heavy metal binding highlights fine structures like cristae or capsid symmetry.^[198] Negative staining, using phosphotungstic acid or uranyl acetate, surrounds isolated particles like viruses or macromolecules with a uniform electron-dense background, outlining their contours without penetrating the sample; this principle is particularly useful for rapid assessment of macromolecular architecture.^[199] For specialized staining, ruthenium tetroxide is employed to visualize hydrophilic polymers, including carbohydrate structures like glycogen, by oxidizing and binding to ether, alcohol, and amide groups in these materials, offering superior contrast to osmium tetroxide for polar regions.^[200] Challenges in EM staining include the high toxicity of osmium tetroxide, which can cause skin discoloration and respiratory issues, and uranyl acetate's radioactivity, necessitating fume hood use and careful disposal.^[196] Grid preparation for negative staining is labor-intensive, prone to artifacts from uneven stain distribution or sample aggregation.^[201] As alternatives, cryo-EM techniques, recognized by the 2017 Nobel Prize in Chemistry awarded to Jacques Dubochet, Joachim Frank, and Richard Henderson, preserve samples in vitreous ice without heavy metal stains, reducing artifacts while achieving atomic resolution.

Limitations and Artifacts

Staining techniques in biology and pathology are prone to various artifacts that can compromise the accuracy of microscopic analysis. Overstaining often results from excessive dye exposure or diffusion of antigens due to delayed fixation, leading to blurred boundaries and non-uniform coloration in tissues. For instance, in immunohistochemical procedures, antigen diffusion can occur if tissues are not fixed promptly, causing artifacts that mimic pathological features. Underfixation exacerbates this by promoting autolysis, where enzymatic self-digestion of tissues leads to structural degradation and false-negative results, as pathologic changes become indistinguishable from processing errors. Dye precipitation, another common artifact, arises from inadequate reagent preparation or storage, forming extraneous deposits that appear as spurious cellular inclusions and increase background noise. Key limitations in staining include non-specific binding and signal instability, which undermine the reliability of results across methods. In immunohistochemistry, endogenous peroxidase activity in tissues like erythrocytes and eosinophils generates false-positive signals by mimicking target antigen localization, necessitating blocking steps to mitigate this issue. Fluorescence-based staining faces photobleaching, where prolonged excitation light irreversibly degrades fluorophores, reducing signal intensity over time and limiting observation durations, particularly in live-cell imaging. These constraints highlight the need for technique-specific optimizations to preserve diagnostic fidelity. Biases in staining interpretation further complicate analysis, primarily through observer subjectivity and technical inconsistencies. Human evaluation of stained slides is inherently subjective, with inter-observer variability arising from differences in perceiving stain intensity and distribution, potentially leading to divergent diagnoses in ambiguous cases. Batch variability, caused by fluctuations in reagent quality, fixation conditions, or staining protocols across runs, introduces systematic errors that affect reproducibility, especially in large-scale histopathology studies. To address these challenges, standardized controls such as negative and positive tissue controls are essential for validating stain specificity and detecting artifacts early in the workflow. Digital image analysis tools offer objective quantification, automating color normalization and artifact detection to reduce subjectivity and batch effects, thereby enhancing consistency in high-throughput settings. Additionally, regulatory efforts have phased out highly toxic stains like ethidium bromide due to its mutagenic properties, with safer alternatives such as SYBR Safe DNA gels adopted post-2000 to minimize health risks without compromising visualization efficacy. Looking ahead, artificial intelligence-driven approaches promise to correct staining artifacts through virtual histological staining, generating artifact-free images from unstained samples and compensating for issues like autolysis in autopsy tissues. Recent advances as of 2024 include deep learning-enabled virtual staining techniques that improve efficiency and reduce the need for physical staining.^[202] Non-destructive labeling with nanoparticles, such as quantum dots, is emerging in the 2020s as a photostable alternative to traditional dyes, enabling repeated imaging without tissue degradation. Ethically, overreliance on imperfect staining in diagnostics contributes to misdiagnosis rates of 5-15% in cytology, underscoring the importance of integrated multimodal verification to avoid clinical errors and ensure patient safety.

References

[1]
Histology, Staining - StatPearls - NCBI Bookshelf
May 1, 2023 · Histology is the microscopic study of tissues and organs through sectioning, staining, and examining those sections under a microscope.
[2]
Differential Staining Techniques – Microbiology - Milne Publishing
In microbiology, differential staining techniques are used more often than simple stains as a means of gathering information about bacteria.Viewing Bacterial Cells · Acid Fast Stain · Method
[3]
Gram Staining - StatPearls - NCBI Bookshelf
Mar 28, 2025 · Gram staining is a vital diagnostic tool used when a bacterial infection is suspected. This technique quickly categorizes bacteria as gram-positive or gram- ...
[4]
4.1: Introduction to Staining - Biology LibreTexts
May 26, 2021 · The purpose of staining is to increase the contrast between the organisms and the background so that they are more readily seen in the light ...
[5]
None
### Summary: How Fluorescent Dyes Interact with Light in Staining for Microscopy
[6]
A tour of the cell: Transmission electron microscopy | OpenLearn
So, after staining, cell components that are rich in lipids and areas where proteins and DNA are concentrated prevent the passage of electrons and so appear ...
[7]
Histological Stains: A Literature Review and Case Study - PMC
Jun 25, 2015 · Historical staining techniques by early pathologists and surgeons were borrowed from a seventeen scientist Leeuwenhoek, who was instrumental in ...
[8]
Paul Ehrlich | German Medical Scientist & Nobel Laureate | Britannica
The selective action of these dyes on different types of cells suggested to Ehrlich that chemical reactions were occurring in cells and that these reactions ...
[9]
A brief history of the Feulgen reaction - PMC - PubMed Central
Apr 12, 2024 · One hundred years ago, Robert Feulgen published a landmark paper in which he described the first method to stain DNA in cells and tissues.
[10]
Fluorescence Microscopy - Zeiss Campus - Florida State University
Fluorescence microscopy is capable of imaging the distribution of a single molecular species based solely on the properties of fluorescence emission.
[11]
(PDF) History of Immunohistochemistry - ResearchGate
May 4, 2025 · In 1970, Dr. Ludwig Sternberger developed soluble peroxidase–antiperoxidase (PAP) complexes, which increased sensitivity and efficiency. ...
[12]
In Situ Imaging of Tissue Remodeling with Collagen Hybridizing ...
Sep 6, 2017 · In this study, we demonstrated that denatured collagen generated during tissue remodeling can be effectively detected using CHP hybridization in ...Results and Discussion · Methods · Supporting Information · References
[13]
Fast, three-dimensional, live-cell super-resolution imaging with ...
Mar 3, 2025 · The rapid acquisition substantially reduces motion artefacts during the imaging of dynamic structures, such as late endosomes, in live cells.
[14]
Automating Immunohistochemistry | Biocompare
Dec 24, 2014 · During the 1980s, many of these processes began to be automated, and today clinical-pathology laboratories routinely take slides containing FFPE ...
[15]
Time-Saving Benefits of Intravital Staining - PMC - NIH
Intra-vital staining eliminates damage or distortion of tissues often caused by pressure pumps. Thus, intravital labeling provides an elegant alternative for ...
[16]
In Vivo Imaging Techniques: A New Era for Histochemical Analysis
Nov 28, 2016 · Finally, with this technique, we can correlate the findings with histology to investigate disease mechanisms. In vivo “staining” (contrast agent).Missing: challenges | Show results with:challenges
[17]
The fate of the CNS midline progenitors in Drosophila as revealed ...
Cells are labelled with a lipophilic fluorescent tracer (DiI) in their normal positions without impaling their membranes.Missing: labeling | Show results with:labeling
[18]
Trypan Blue Exclusion Test of Cell Viability - PMC - NIH
The dye exclusion test is used to determine the number of viable cells present in a cell suspension. It is based on the principle that live cells possess intact ...Missing: vital vivo challenges
[19]
From seeing to believing: labelling strategies for in vivo cell-tracking ...
Jun 6, 2013 · We review and discuss the advantages and limitations of a number of strategies commonly used to label and track cells at high resolution in vivo in mouse and ...
[20]
Effect of Fixatives and Tissue Processing on the Content and ...
The purpose of this review is to provide an overview of the methods of human tissue acquisition, fixation, and preservation.Missing: challenges | Show results with:challenges
[21]
Primer to Voltage Imaging With ANNINE Dyes and Two-Photon ...
Jul 15, 2019 · ANNINE-6 and ANNINE-6plus are voltage-sensitive dyes that when combined with two-photon microscopy are ideal for recording of neuronal voltages in vivo.
[22]
[PDF] LAB 3 Bacterial Staining Techniques II I. Differential Stains
A. Gram Stain. The previous lab introduced simple staining techniques that enable microbiologists to observe the morphological characteristics of bacteria.
[23]
Gram Staining - SERC (Carleton)
Gram staining is a common technique used to differentiate two large groups of bacteria based on their different cell wall constituents.
[24]
[PDF] The Science and Application of Hematoxylin and Eosin Staining
Hematoxylin and Eosin staining is a primary diagnostic technique for morphology, used for nuclear detail and is the most common staining technique in histology.
[25]
Gram Stain – WPUNJ Microbiology Laboratory Manual
Differential staining techniques provide additional information on bacterial strains that a simple stain cannot. Differential staining uses two stains ...
[26]
Gram Staining Rules - A.T. Still University
Dec 11, 2019 · A differential stain like that invented by Hans Christian Gram in 1882 will give you more information and allow you to group the stainable bacteria into more ...
[27]
[PDF] DIFFERENTIAL STAINING, Part I
Differential staining is a procedure that takes advantage of differences in the physical and chemical properties of different groups of bacteria. It allows us ...<|control11|><|separator|>
[28]
ISO/TS 17518:2015 - Reagents for staining biological material
In stock 2–5 day deliveryISO/TS 17518:2015 provides requirements and guidance for selecting and assessing the quality of reagents to be used for in vitro diagnostic staining in biology.
[29]
An Introduction to Routine and Special Staining - Leica Biosystems
See how routine (H&E) & special stains enable visualisation of otherwise transparent tissue under a microscope & are critical for tissue-based diagnosis.
[30]
Quality and safety aspects in histopathology laboratory - PMC - NIH
Designing a quality control and assurance plan in histopathology should focus on three elements: (1) pre-analytical phase, (2) the analytical phase and (3) the ...
[31]
ILA28 | Quality Assurance for Design Control and ... - CLSI
Jan 31, 2011 · This CLSI document provides guidelines for developing validated immunohistochemistry assays for diagnostic, prognostic, and predictive applications.
[32]
a Comparison of Two Automated Systems and Manual Staining - NIH
The costs for consumables were less in the manual staining technique than the automated systems. The two latter required less hands-on time of the laboratory ...
[33]
Manual Staining Vs Automatic Staining - Solmedia
Jun 8, 2022 · Automatic staining is faster, consistent, and reduces repetitive motion. Manual staining allows for more control, less reagent use, and is ...
[34]
Removing Batch Effects From Histopathological Images for ... - NIH
Color batch effects, which lead to variation in stain colors across batches, affect the performance of color segmentation methods and color features.
[35]
Stain normalization methods for histopathology image analysis
This study reviews different stain normalization methods highlighting the main methodologies, contributions, advantages, and limitations of correlated works.
[36]
Deep learning-enabled virtual histological staining of biological ...
Mar 3, 2023 · In this Review, we provide a comprehensive overview of the recent research advances in deep learning-enabled virtual histological staining techniques.Introduction · Training Data Preparation · Virtual Staining Model...
[37]
Chemical and physical basics of routine formaldehyde fixation - PMC
Fixation is a physico-chemical process that is gradual and complex, involving diffusion of fixative into the tissue and a variety of potential physical ...
[38]
Fixation of Biological Samples
Fixation methods include physical (cryo-fixation, boiling) and chemical (cross-linking, dehydration, coagulation). Chemical cross-linking (formaldehyde) is ...
[39]
Formaldehyde Crosslinking: A Tool for the Study of Chromatin ...
Formaldehyde can crosslink macromolecules together as well as modify exposed groups on macromolecules, forming a product species potentially stabilized by ...
[40]
Fixation Strategies and Formulations Used in IHC Staining
Fixatives containing glutaraldehyde are stronger protein crosslinkers than formaldehyde. However, they penetrate tissue more slowly, causing extraction of ...
[41]
Alcoholic fixation over formalin fixation: A new, safer option for ... - NIH
These fixatives are faster in penetration of tissues as all these components of EMA (ethanol, methanol and acetic acid) have higher coefficients of ...
[42]
Tissue Embedding Throwdown: Paraffin vs OCT vs Resin
May 19, 2025 · The three primary means of embedding tissue for sectioning are paraffin wax, Optimal Cutting Temperature (OCT), and resin. Each has its own set ...
[43]
Paraffin Tissue Processing: Steps, Benefits, and Best Practices
Microscopy demands ultra-thin sections of tissue (typically 4 - 10 micrometres thick). Fresh tissue, which is soft and fragile, requires the support and ...
[44]
Coverslip Mounting Media - Ted Pella
Histomount is the classic choice in synthetic mounting media. Histomount provides a permanent seal to store or ship slides with confidence.UV Cure UV Mounting Media... · Mounting Medium in a Tube...
[45]
Tissue Fixation - an overview | ScienceDirect Topics
Prolonged fixation in formaldehyde also causes severe tissue shrinkage after dehydration with ethanol. Formaldehyde is oxidized into formic acid if the ...
[46]
Popular Types of Fixatives used in Histopathology - Leica Biosystems
Popular fixatives include phosphate buffered formalin, formal calcium, formal saline, zinc formalin, Zenker’s, Helly’s, B-5, Bouin’s, and others.
[47]
Immunochemistry on ultrathin frozen sections | Journal of Molecular ...
Ultrathin frozen sections can be cut smoothly from many fixed and appropriately treated specimens. To use such sections for immunochemical localization of.
[48]
Retrospective on the Early Development of Cryoelectron Microscopy ...
The early 1970s saw development of the freeze fracture/etch technique, and with it a high awareness by electron microscopists of the ice crystallization ...
[49]
Formaldehyde and Cancer Risk | American Cancer Society
Sep 10, 2024 · IARC has concluded that formaldehyde is "carcinogenic to humans" based on sufficient evidence it can cause nasopharyngeal cancer and leukemia.Missing: histology | Show results with:histology
[50]
Occupational Exposure and Risk Assessment of Formaldehyde in ...
In Conclusion exposure to formaldehyde has adverse effects on health including both acute and carcinogenic effects. Formaldehyde is widely using in pathology ...
[51]
DPDx - Diagnostic Procedures - Blood Specimens - CDC
Prepare thick and thin smears; allow to dry; dip in absolute methanol before Giemsa staining to enhance staining of microfilariae.
[52]
Preparation of a Bacterial Smear for Staining - Virtual Microbiology
The goal of smear preparation is to place an appropriate concentration of cells on a slide and then cement them there so that they do not wash off.
[53]
Tissue preparation - Histology at SIU - Southern Illinois University
Sep 9, 2025 · Some artifacts are unavoidable. Fixation, by its very nature, kills cells and stabilizes dynamic cell processes. Enzyme activity is usually ...
[54]
Whole Mount Imaging Methodology to Visualize and Quantify ... - NIH
The present protocols describe novel whole mount imaging for visualization of peripheral structures in the ocular lens with methods for image quantification.
[55]
A Simple and Efficient Method for Preparing Cell Slides and Staining ...
Nov 4, 2015 · Here we present an alternative method for preparing a slide and cell staining in the absence of a cytocentrifuge (and cytoclips).
[56]
Paraffin & Frozen Sectioning - Histology Research Core
The sections themselves can vary in thickness, measured by micrometers, and ... A ribbon refers to the sequence of connected sections pulled from the microtome.<|separator|>
[57]
Evaluation of Cytologic Sample Preparations for Compatibility With ...
Sep 20, 2021 · Snap-frozen samples were thawed at 4°C for up to 30 minutes. The material of smeared, (stained) cytospin and FFPE specimens was scraped using a ...
[58]
[PDF] Gram Stain Protocols - American Society for Microbiology
Sep 30, 2005 · The Gram stain was first used in 1884 by Hans Christian Gram (Gram,1884). Gram was searching for a method that would allow visualization of ...
[59]
Gram-stain-based antimicrobial selection reduces cost and overuse ...
Oct 26, 2015 · The Gram stain dramatically reduced the overuse of broad-spectrum antimicrobials without affecting the effectiveness of the treatment.Missing: applications troubleshooting
[60]
Effect of Gram Stain–Guided Initial Antibiotic Therapy on Clinical ...
Apr 8, 2022 · The findings of this trial suggest that Gram staining can be used in the critical care setting to ameliorate the spread of multidrug-resistant pathogens.Missing: troubleshooting | Show results with:troubleshooting
[61]
Acid Fast Bacteria - StatPearls - NCBI Bookshelf
Aug 7, 2023 · In the Ziehl-Neelsen method, smeared slides are first stained with carbolfuchsin (CF). [12] This is done by submerging the smear in a drop of ...
[62]
https://asm.org/asm/media/protocol-images/acid-fast-stain-protocols.pdf
[63]
Acid-Fast Positive and Acid-Fast Negative Mycobacterium tuberculosis
Neelsen published a modified Ziehl's staining protocol that described the use of a 0.75% fuchsin solution in 5% carbolic acid followed by decolorization with a ...
[64]
Acid-fast stain: MedlinePlus Medical Encyclopedia
Dec 31, 2023 · The acid-fast stain is a laboratory test that determines if a sample of tissue, blood, or other body substance is infected with the bacteria ...
[65]
[PDF] AFB Smear Microscopy - APHL
–CDC recommends fluorochrome staining for detecting AFB in primary patient ... • Use of Fluorochrome Staining for Detecting Acid-fast. Mycobacteria, CDC.
[66]
https://asm.org/ASM/media/Protocol-Images/Endospore-Stain-Protocol.pdf?ext=.pdf
[67]
A Simplified Method of Staining Endospores - Science
Schaeffer and Mac Donald FultonAuthors Info & Affiliations. Science. 17 Feb 1933. Vol 77, Issue 1990. p. 194. DOI: 10.1126/science.77.1990.194 · PREVIOUS ...Missing: original | Show results with:original
[68]
A rapid staining technique for the detection of the initiation ... - PubMed
Modified spore stain (Wirtz-Conklin) was found to be useful to detect the initiation of spore germination as early as 30 min following incubation in a ...Missing: history 1903
[69]
A SIMPLIFIED METHOD OF STAINING ENDOSPORES - PubMed
A SIMPLIFIED METHOD OF STAINING ENDOSPORES. Science. 1933 Feb 17;77(1990):194. doi: 10.1126/science.77.1990.194. Authors. A B Schaeffer, M D Fulton.Missing: original paper
[70]
Bacterial Spores - StatPearls - NCBI Bookshelf - NIH
Endospores causing food poisoning include: Bacillus cereus. Clostridium perfringes. B. cereus endospores are among the leading organisms causing food poisoning.
[71]
Clostridia: Sporeforming Anaerobic Bacilli - Medical Microbiology
The clostridia form characteristic spores, the position of which is useful in species identification; however, some species do not sporulate unless exposed to ...Missing: interpretation | Show results with:interpretation
[72]
Amyloid Histology Stain for Rapid Bacterial Endospore Imaging - PMC
The classical technique of endospore detection uses malachite green dye to stain the endospore coat via thermal treatment or long incubation periods (71).
[73]
Visualizing germination of microbiota endospores in the mammalian ...
In this study, we developed a two-color tagging strategy using fluorescein isothiocyanate (FITC) staining and fluorescent D-amino acid (FDAA)-based metabolic ...
[74]
http://www.romanowsky.ru/site_files/docs/Romanowsky/romanowsky1(en).pdf
[75]
None
### Summary of Romanowsky Staining and Scientific Priority
[76]
Romanowsky Stains- Principle, Types, Applications - Microbe Notes
Jun 23, 2022 · The heated methylene blue with Eosin Y is allowed to precipitate to form an eosinate, which is then dissolved with methanol.
[77]
How to do a Wright-Giemsa Stain - Hardy Diagnostics
Jun 3, 2024 · The Romanowsky stain is comprised of oxidized methylene blue, sometimes referred to as "azure," and eosin Y dyes. The azure dyes are basic and ...
[78]
A variant acute promyelocytic leukemia with t(11;17) (q23;q12 ...
... stain bright pink, red, or purple in Romanowsky stains; and multiple Auer rods [1-4, 10]. Therefore, APL can be easily diagnosed at the time of morphologic ...
[79]
Comparative study of the efficacy of Wright-Giemsa stain and Liu's ...
Our results showed that the occurrence of Auer rods as well as faggots in leukemic promyelocytes were significantly higher under Liu's stain than under Wright- ...
[80]
Hematoxylin and eosin stain | Radiology Reference Article
May 11, 2020 · Hematoxylin has an intense purple-blue hue and binds to nucleic acids. Eosin has a pink hue and non-specifically stains proteins. These two ...
[81]
H&E Staining Overview: A Guide to Best Practices
The staining procedure for H&E follows a basic protocol: Dewaxing; Dehydration; Hematoxylin; Differentiation; Bluing; Eosin; Dehydration; Clearing; Cover- ...
[82]
From silks to science: The history of hematoxylin and eosin staining
Jan 11, 2023 · The use of eosin as a histological stain was first described by Ernst23 Fischer in 1876. Fischer commented on eosin's ease of use and ability ...
[83]
[PDF] The long history of hematoxylin
Jul 12, 2009 · Hematoxylin remains the most popular nuclear stain in histology. This paper briefly describes the history of hematoxylin production and use in.
[84]
https://doi.org/10.1126/science.95.2469.438
[85]
Pap Test - Clinical Methods - NCBI Bookshelf - NIH
Exfoliative cytopathology—the Papanicolaou method, or Pap test—is the study of normal and disease-altered, spontaneously exfoliated, or mechanically dislodged ...Missing: liquid- | Show results with:liquid-
[86]
Nuances of the Papanicolaou stain - PMC - PubMed Central - NIH
Jun 14, 2022 · The PAP stain is a polychromatic counterstaining method consisting of stains such as Orange G 6 (OG6) and modified eosin azure (EA).
[87]
Abnormal Papanicolaou Smear - StatPearls - NCBI Bookshelf - NIH
Jan 2, 2023 · The primary cause of abnormal pap smears is associated with infection by human papillomavirus (HPV).Missing: applications | Show results with:applications
[88]
Basics of cytology - PMC - PubMed Central - NIH
Monolayer liquid-based cytology. This technology is now the standard method that is used to prepare Papanicolaou smears. The smears are superior to their ...Basics Of Cytology · Exfoliative Cytology · Fine Needle Aspiration...Missing: mechanism | Show results with:mechanism
[89]
The Pap smear in inflammation and repair - PMC - PubMed Central
Apr 30, 2022 · This chapter describes in detail the cytoplasmic and nuclear reactive changes that are found in specific and non-specific inflammatory conditions.
[90]
Liquid-based cytology: Technical aspects - PMC - NIH
Jun 14, 2022 · The staining process takes 30 min. Papanicolaou stain of fixed samples offers the best option of judging the fine details of cell structure.Specimen Processing With The... · Thinprep · PrincipleMissing: history | Show results with:history
[91]
Preventing Cervical Cancer: Best Practices in Pap and HPV Testing
Jun 22, 2025 · Testing Procedures Liquid-based cytology was introduced in 1996 as an evolution of conventional Pap smears to improve their diagnostic ...Specimen Requirements And... · Results, Reporting, And... · Review Questions
[92]
Histological Demonstration of Mucin after Periodic Acid - Nature
THIS note describes the histological demonstration of mucin by Schiff's reagent following the action of periodic acid. Zenker-formol sections were passed to ...
[93]
A microchemical reaction resulting in the staining of ... - PubMed
A microchemical reaction resulting in the staining of polysaccharide structures in fixed tissue preparations. Arch Biochem. 1948 Jan;16(1):131-41.Missing: PDF | Show results with:PDF
[94]
Periodic Acid Schiff Reaction | StainsFile
This is a technique for the demonstration of carbohydrates in tissue sections. The purpose of the periodic acid is to oxidize some of the tissue carbohydrates.Missing: 1946 | Show results with:1946
[95]
PAS (Periodic acid-Schiff) - Pathology Outlines
Jul 15, 2022 · PAS (Periodic acid-Schiff) is a special stain, not an immunostain, that stains basement membrane (normal and in tumors), glycogen, ...
[96]
Role of special stains in diagnostic liver pathology - PubMed Central
Mar 29, 2013 · Periodic Acid‐Schiff Stain. The periodic acid‐Schiff (PAS) stain is useful for identifying glycogen, but removing glycogen with diastase ...<|separator|>
[97]
Some histological methods; trichrome stainings and their preliminary ...
Some histological methods: trichrome stainings and their preliminary technique. Author(s): P Masson, P. MASSON, CLP Masson, PJ Masson. Publication date: 1929.
[98]
A One-Stop Protocol to Assess Myocardial Fibrosis in Frozen ... - NIH
Jan 27, 2022 · Masson's Trichrome Staining (MTS), first developed by Claude Pierre Masson, has been routinely used to differentiate cells and their ...
[99]
Liver fibrosis quantification - PMC - PubMed Central - NIH
Masson's trichrome stain imparts a blue color to collagen against a background of red hepatocytes and other structures. The trichrome stain typically stains ...
[100]
Analysis of Generalized Fibrosis in Mouse Tissue Sections ... - NIH
May 20, 2020 · Masson's trichrome staining detects collagen fibers, distinguishing muscle fibers (red), collagen (blue), and nuclei (black) in tissue sections.
[101]
Adipose tissue-derived stem cells suppress hypertrophic scar ... - NIH
Histopathology, immunohistochemistry, and Masson's trichrome staining analysis. The wound healing samples in vivo or cultured HS tissues ex vivo were embedded ...
[102]
[PDF] Application of Silver Degeneration Stains for Neurotoxicity Testing
Bielschowsky (5) introduced a silver method that, in contrast to the Golgi methods, essentially stained all types of cells and neural processes (Figure 1).
[103]
Silver diagnosis in neuropathology: principles, practice and revised ...
In this review, four major silver-staining methods, modified Bielschowsky, Bodian, Gallyas (GAL) and Campbell–Switzer (CS) methods, are outlined
[104]
A Simple Method for the Silver Impregnation of Reticulum - PMC - NIH
This may not be the complete list of references from this article. Foot N. C., Foot E. B. A Technique of Silver Impregnation for General Laboratory Purposes.
[105]
https://www.abcam.com/en-us/technical-resources/protocols/bielschowskys-silver-stain
[106]
Bielschowsky's Silver Staining Protocol for Nerve Fibers, Axons ...
Jan 26, 2024 · The protocol involves sensitizing nerve fibers with silver, treating with ammoniacal silver, then reducing to metallic silver. Staining is done ...
[107]
Foot's Impregnation for Reticulin - StainsFile
Preparation of Foot's Ammoniacal Silver. Variation I. Place 25 mL of 10% silver nitrate in a flask. Add 1 mL of 40% sodium hydroxide.
[108]
Silver Impregnation | StainsFile
It is thought that the silver compound attaches to the reticulin fibers in both a focal and non-specific fashion.Missing: Foot | Show results with:Foot
[109]
Defining invasion in breast cancer: the role of basement membrane
33 BMs also contain reticular fibres, which appear as black lines when silver-based stains are applied. Silver stains show greater levels of contrast than PAS ...Missing: neurohistology | Show results with:neurohistology
[110]
Brain Tumors - Neupsy Key
Jul 2, 2016 · Silver stain highlights the abundant pericellular deposition of reticulin fibers (D). What other finding is characteristic of PXA? • ...<|control11|><|separator|>
[111]
Silver impregnation methods for reticulum fibers and reticulin
Maresch (1905) introduced Bielschowsky's silver impregnation technic for neurofibrils as a stain for reticulum fibers, but emphasized the nonspecifity.Missing: history Golgi
[112]
Sudan III - Dyes for Histology - StainsFile
Sudan III is a red, fat-soluble lysochrome dye, used to demonstrate triglycerides in frozen sections and some protein-bound lipids in paraffin sections.
[113]
Oil Red O - Dyes for Histology - StainsFile
Oil red O is a lysochrome (fat soluble dye) predominantly used for demonstrating triglycerides in frozen sections, but may also stain some protein bound lipids ...
[114]
Fats and Lipoids in Relation to Methods of Staining
Olein and oleic acid are liquid fats commonly found in the tissues and these have a marked power of dissolring. Sudan 111. ... Lorrain Smith, The Staining of Fat ...
[115]
Don't See Red! Use Oil Red O- A Histological Stain For Fats And ...
May 29, 2025 · Introduced by French in 1926, ORO is a fat-soluble diazo dye, and is classified as one of the Sudan dyes which have been in use since the late ...
[116]
[PDF] Sudan IV Stain, Herxheimer Alcoholic - Newcomer Supply
Sudan IV stain identifies fat/lipid in frozen sections using an acetone/alcohol solvent mixture. The dye is more soluble in lipid than the solvents.
[117]
Oil Red O Staining Protocol (Ellis) - IHC WORLD
Jan 26, 2024 · The histological mechanism of the staining of lipids is invariably a function of the physical properties of the dye being more soluble in the ...
[118]
[PDF] SUDAN BLACK B PROTOCOL - Neuromuscular Home Page
The Sudan Black B protocol uses a lipid-dissolved dye, staining tissue lipids. It requires snap-frozen muscle, and the dye is dissolved in propylene glycol.
[119]
Sudan IV Staining: A Procedure for Staining Lipid-Laden ... - JoVE
Jul 8, 2025 · Within the plaque, Sudan IV, a fat-soluble diazo dye having high affinity for triglycerides and cholesterol esters of lipoproteins, moves from ...Missing: history | Show results with:history
[120]
Oil red O - Pathology Outlines
Jun 17, 2021 · In muscle biopsies, oil red O is mainly used to assess the amount of sarcoplasmic lipid droplets and assess for lipid storage diseases (Dubowitz ...<|separator|>
[121]
Sudan black: a fast, easy and non-toxic method to assess myelin ...
Our adapted sudan black staining can be used to rapidly and non-toxically screen for remyelinating therapies in demyelinating diseases.Missing: variants | Show results with:variants
[122]
Sudan Black B Staining: Principle, Procedure, Results, Uses
Jan 28, 2023 · Sudan Black B is a slightly basic dye that combines with the acidic groups in the lipid compounds, hence staining the phospholipids, lipoproteins, and ...
[123]
Fluorescence Fundamentals | Thermo Fisher Scientific - US
Fluorescence is a three-stage process in fluorophores, involving excitation, an excited-state lifetime, and emission, with a Stokes shift.Missing: staining mechanism
[124]
Albert Coons's Bright Idea - Lasker Foundation
Jun 16, 2025 · Albert Coons spent his time in the summer of 1939 observing autopsies and thinking about diseases such as leukemia and rheumatic fever.
[125]
GFP: Lighting up life - PMC - NIH
Jun 23, 2009 · This protein has become among the most important imaging tools in the life sciences, making previously hidden biological processes visible for study.Missing: history | Show results with:history
[126]
Introduction to Fluorescence Microscopy | Nikon's MicroscopyU
Fluorescence microscopy uses the absorption and re-emission of light by specimens, irradiating them with specific wavelengths and separating the emitted light. ...Figure 1 - Epi-Fluorescence... · Figure 2 - Fluorescence... · Figure 6 - Nikon B-2e...
[127]
An Introduction to Fluorescence | Learn & Share - Leica Microsystems
In the case of fluorophores, the energy is emitted as light (fluorescence emission) of a longer wavelength and less energy than the excitation light. This ...Fluorescence As A Tool In... · Luminescence In Microscopy · Examples Of Images Recorded...
[128]
Fluorescence In Situ Hybridization (FISH)
Fluorescence in situ hybridization (FISH) is a laboratory technique for detecting and locating a specific DNA sequence on a chromosome.
[129]
Fluorescence In Situ Hybridization (FISH) and Its Applications - PMC
Feb 10, 2017 · FISH involves annealing of DNA or RNA probes attached to a fluorescent reporter molecule with specific target sequence of sample DNA, which can ...Missing: key | Show results with:key
[130]
What is Multicolor Flow Cytometry | Cell Sorting Techniques
Multicolor flow cytometry provides rapid, multiparametric analysis of various cellular subpopulations of interest.
[131]
Fluorescent Cell Barcoding for Multiplex Flow Cytometry - PMC - NIH
Fluorescent Cell Barcoding (FCB) enables high throughput, ie high content flow cytometry by multiplexing samples prior to staining and acquisition on the ...
[132]
TUNEL Assays | Thermo Fisher Scientific - US
Thermo Fisher Scientific offers TUNEL assays that enable researchers to visualize and quantify DNA fragmentation in tissue samples or cultured cells.
[133]
Current trends in luminescence-based assessment of apoptosis - NIH
Oct 30, 2023 · TUNEL assay is another representative apoptosis assay that can be performed in vitro on cell cultures, but also in vivo on animal models and ex ...
[134]
Recent Advances in Fluorescent Nanoparticles for Stimulated ...
Jun 21, 2024 · This review will comprehensively review recent advances in fluorescent NP-based STED probes, discuss their advantages and pitfalls, and outline the directions ...
[135]
Navigating the Challenges and Future of Super-resolution Microscopy
Apr 19, 2024 · In this review, we will navigate through the advancements, applications, challenges, and future prospects of SRM in biological research.
[136]
Overview of Immunohistochemistry (IHC) - Thermo Fisher Scientific
The principles of IHC have been known since the 1930s, but it was not until 1942 that the first IHC study was reported. Coons et al. (1942) used FITC-labeled ...Introduction · Applications · Immunodetection
[137]
https://diagnosticpathology.biomedcentral.com/articles/10.1186/s13000-022-01197-5
[138]
https://www.leicabiosystems.com/us/knowledge-pathway/immunohistochemistry-an-overview-steps-to-better-ihc-staining/
[139]
Immunohistochemical diagnosis of human infectious diseases
Jan 30, 2022 · The historical development of immunohistochemistry and automation. Immunohistochemical staining is derived from immunofluorescence, and dates ...<|separator|>
[140]
Intro to Immunohistochemistry (IHC) Staining: Steps & Best Practices
The level of nuclear counterstain is carefully regulated and standardized so as not to obscure positive staining. The counterstain should provide the best ...
[141]
Basic violet 14 | C20H20ClN3 | CID 12447 - PubChem - NIH
One of the major constituents of Basic fuchsin, together with pararosanilin, magenta II and new fuchsin. It has a role as a fluorochrome, a histological dye and ...
[142]
Crystal Violet | C25H30ClN3 | CID 11057 - PubChem
It has a role as a histological dye, an antiseptic drug, an antibacterial agent, an antifungal agent and an anthelminthic drug. It contains a crystal violet ...
[143]
Crystal violet – Knowledge and References - Taylor & Francis
Crystal Violet (CV) is a cationic triarylmethane dye, which is potentially toxic, mutagenic and carcinogenic (Thomas and MacPhee 1984). It imparts various eye- ...
[144]
Characterisation of a series of triarylmethane dyes as light ...
Basic fuchsin is a triaminotriphenylmethane dye belongs to a triarylmethane category. It found huge applications in the field of coloring agent for staining ...
[145]
The Role of Biological Stains in Diagnostics | GSP Chem
Oct 29, 2025 · Basic Stains (e.g., Methylene Blue, Crystal Violet): Bind to acidic components like DNA and RNA. Acidic Stains (e.g., Eosin, Picric Acid): ...<|separator|>
[146]
https://www.sciencedirect.com/topics/chemistry/basic-fuchsin
[147]
https://cymitquimica.com/cas/3248-91-7/
[148]
Basic Fuchsin - an overview | ScienceDirect Topics
Basic fuchsin is defined as a dye that can be used in the preparation of carbon dots for ratiometric pH sensing, demonstrating a pH-dependent emission response ...
[149]
https://www.nsta.org/blog/how-safe-are-biological-stains
[150]
https://pubmed.ncbi.nlm.nih.gov/26613989/
[151]
https://www.stainsfile.com/theory/methods/staining-amyloid-proteins-for-histology/amyloid-metachromasia/
[152]
Crystal Violet: Toxic, Genotoxic, Carcinogenic Effects & Degradation
It acts as a mitotic poison, potent carcinogen and a potent clastogene promoting tumor growth in some species of fish. Thus, CV is regarded as a biohazard ...Missing: metachromasia fuchsin
[153]
Amyloid Metachromasia | StainsFile
For amyloid staining, crystal violet is often preferred to methyl violet as the orthochromatic shade is a little bluer and the purple-red of the amyloid ...
[154]
Fuchsine or magenta: the second most famous aniline dye. A short ...
The second aniline dye, a crimson red color, now is named fuchsine or magenta. This dye was prepared using the same starting material, but different oxidants.
[155]
Synthesis and DNA binding profile of monomeric, dimeric, and ...
The triphenylmethane dyes fuchsin, malachite green, crystal violet, and methyl green are all histochemical stains which are known to bind duplex DNA (Figure 1).Missing: specificity simple
[156]
Eosin - an overview | ScienceDirect Topics
Eosin is defined as a fluorescent xanthene dye that binds to eosinophilic compounds and is commonly used as a cytoplasmic stain in histology, often combined ...
[157]
Eosin Y - Dyes for Histology - StainsFile
Eosinol Y is soluble in ethanol and slightly soluble in xylene, but not in water, and is useful for staining difficult tissues.
[158]
An Intro to Hematoxylin: Staining Protocol, Hematein Formation
To produce a functional dye, hematoxylin is oxidized to hematein and subsequently is bound to one of several metal ions including aluminum (Al+3), iron (Fe+3) ...Missing: haematoxylin | Show results with:haematoxylin
[159]
Hematoxylin - StainsFile
Hemalums are usually classified as either progressive or regressive, the progressive requiring no differentiation and the regressive requiring differentiation ...
[160]
Formulating Alum Hematoxylin - StainsFile
Mordant. The usual mordant for nuclear staining with hemalum is an alum, or aluminum double sulfate. Ammonium or potassium aluminum sulfates are the ...
[161]
The hematoxylins and eosin - Basicmedical Key
Dec 13, 2017 · The most useful mordants for hematoxylin are salts of aluminum, iron, and tungsten, although hematoxylin solutions using lead as a mordant ...
[162]
Hematoxylin Nuclear Stain Reports Oxidative Stress Via Near ... - NIH
For H&E, aluminum in the form of Al (III) is typically used as a mordant, although iron, Fe (III), also produces nuclear staining and is used in other staining ...
[163]
Hematoxylin and eosin staining of tissue and cell sections - PubMed
May 1, 2008 · Nucleoli stain with eosin. If abundant polyribosomes are present, the cytoplasm will have a distinct blue cast. The Golgi zone can be ...
[164]
A special issue devoted to hematoxylin, hematein, and hemalum
The next most common metal ion used in conjunction with hematoxylin is iron(III), which brings about oxidation to hematein and forms dye–metal complexes that ...
[165]
Bluing agents for histopathology - Newcomer Supply
Newcomer Supply bluing agents include Scott Tap Water Substitute, Ammonium Hydroxide 28-30%, ACS and Lithium Carbonate Saturated Aqueous Solution.Missing: haematoxylin stability
[166]
Nucleic Acid Stains—Section 8.1 | Thermo Fisher Scientific - US
It has been used for the treatment of myeloma, binding selectively to myeloma cells in the bone marrow. ref. Murgatroyd described the use of ...
[167]
DAPI: a DNA-specific fluorescent probe - PubMed
The physicochemical properties of the dye and its complexes with nucleic acids and history of the development of this dye as a biological stain are described.
[168]
The Use of Hoechst Dyes for DNA Staining and Beyond - MDPI
Hoechst dyes stain the DNA of both living and fixed cells and are compatible with immunohistochemistry applications. Binding of Hoechst 33342 to DNA induces ...
[169]
Unique spectral signatures of the nucleic acid dye acridine orange ...
Acridine orange (AO), a nucleic acid dye with unique spectral properties, enables real-time measurement of RNA and DNA as proxies for cell viability during ...
[170]
Measuring Cell Death by Propidium Iodide Uptake and Flow ...
Propidium iodide (PI) binds to DNA and cannot enter cells with intact membranes. PI uptake indicates dead cells, which have permeable membranes. PI is used in ...
[171]
https://probes.bocsci.com/resources/dapi-dyes.html
[172]
Ethidium bromide interactions with DNA: an exploration of a classic ...
Mar 25, 2021 · Ethidium was incorporated for the first time in 1969 as a staining agent in electrophoresis gel analysis due to a broken-down centrifuge, as ...
[173]
DAPI: a DNA-Specific Fluorescent Probe - Taylor & Francis Online
Development of DAFl. DAPI (4',6-diamidino-:!-phenylindole dichlo- ride) (Fig. 1) was first synthesized in Otto Dann's laboratory at Erlangen as one of many ...
[174]
Analysis of DAPI and SYBR Green I as Alternatives to Ethidium ...
DAPI and SYBR Green I are good staining alternatives to ethidium bromide in that they have similar sensitivity and are both easy to use.
[175]
The Iodine/Iodide/Starch Supramolecular Complex - PMC - NIH
The iodine–starch (or, more specifically, iodine–amylose) reaction has a two-century history and a wide range of practical applications. Similar reactions occur ...
[176]
Lugol's Iodine - an overview | ScienceDirect Topics
The brownish-black staining obtained with Lugol's iodine is not homogenous because of the variable concentrations of glycogen in the epithelium. Glycogenic ...
[177]
Stains for Microbiology Specimens - Hardy Diagnostics
The Kinyoun method of staining uses high concentrations of basic carbol fuchsin and phenol to facilitate penetration of the dye into the cells. Increased ...
[178]
[PDF] Endospore Stain Protocol - American Society for Microbiology
Sep 29, 2007 · A suspension of the culture is applied to a slide and allowed to air dry. The sample is heat fixed and fitted with a piece of absorbent paper.
[179]
Endospore Staining- Principle, Reagents, Procedure and Result
Aug 10, 2022 · In the Schaeffer-Fulton`s method, a primary stain-malachite green is forced into the spore by steaming the bacterial emulsion. Malachite ...Missing: mechanism | Show results with:mechanism
[180]
[PDF] Malachite Green 1% Intended use
In the Schaeffer-Fulton's method, a primary stain malachite green is forced into the spore by steaming the bacterial emulsion.
[181]
Chemical Fixation | Electron Microscopy - Harvard University
Osmium tetroxide is normally used as a secondary fixative after formaldehyde/glutaraldehyde. It reacts with unsaturated acyl chains of membrane lipids and ...
[182]
Special Stains for Mucin Evaluation: Alcian Blue / PAS, Mucicarmine
Learn about special stains that are used for the evaluation of mucins, mucin-like molecules and other carbohydrate containing macromolecules.
[183]
What are the factors that will affect the rate and effectiveness of ...
Dec 8, 2022 · Tissue thickness– The correct thickness of the tissue is critical for efficient fixation. · pH– pH is another important factor that affects the ...Missing: stainability biological density fatty aqueous dyes
[184]
Comparison of Special Stains for Keratin with Routine Hematoxylin ...
The aim of the present study was to compare the efficacy of special stains for keratin with standard hematoxylin and eosin stain (H and E).
[185]
Sudan Black B staining for lipids on uncleared human brain sections...
Although initially its application to human brain tissue proved to be difficult because if its high lipid content, considerable progress has been made in recent ...Missing: keratin H&E
[186]
Autofluorescence - an overview | ScienceDirect Topics
Autofluorescence is used as a term for the fluorescence emitted by the normal constituents of tissue, such as amino acids, elastin, collagen, NADH, NAD+, ...Missing: blockers | Show results with:blockers
[187]
Quenching autofluorescence in tissue immunofluorescence.
Sep 4, 2017 · Many factors are known to contribute to AF, such as sample fixation, tissue components, lipofusin, elastin and collagen (Banerjee et al., 1999; ...
[188]
Characterizing and Quenching Autofluorescence in Fixed Mouse ...
Feb 8, 2023 · This study demonstrates a feasible, easy-to-perform, and cost-effective method to quench tissue autofluorescence and improve the signal-to-noise ratio in ...
[189]
Permeability of the Endothelial Barrier: Identifying and Reconciling ...
Dec 10, 2020 · Inflammatory factors increase vascular permeability by inducing the formation of focal endothelial gaps that can be transient in acute ...
[190]
Inflammation - Histology at SIU - Southern Illinois University
Jun 10, 2023 · Following inflammation, injured tissue is usually replaced by new cells and extracellular materials, with undamaged surrounding cells ...PHYSIOLOGY · Increased permeability · INFLAMMATORY... · Neutrophils
[191]
Spectrophotometry, Physiochemical Properties, and Histological ...
Oct 25, 2018 · In this study, the physiochemical and spectrophotometric characteristics of beetroot as well as the histological staining potential of various ...
[192]
Antigen Retrieval Immunohistochemistry: Review and Future ... - NIH
Boiling AR pretreatment with AR solution, including 2% SDS and/or other chemicals, to improve efficiency of protein extraction from FFPE tissue sections to ...
[193]
The Legacy of a Founding Father of Modern Cell Biology: George ...
Palade's major contribution was pioneering the use of buffered osmium tetroxide as a fixative to obtain improved contrast [1,4,5]. In the 1974 Nobel Prize ...
[194]
A study of fixation for electron microscopy - PubMed
Osmium tetroxide fixation of tissue blocks, as usually effected, is preceded by an acidification of the tissue. This acidification is probably responsible ...
[195]
Staining - TEM - MyScope
Uranyl acetate and Reynolds lead citrate are commonly used stains for this purpose. Uranyl acetate can be used to stain whole tissue before dehydrating, ...
[196]
Staining Tissue Sections for Electron Microscopy
Oct 7, 2011 · Uranyl acetate is used as a positive stain for EM. Uranyl ions react strongly with phosphate and amino groups, staining DNA and some proteins.<|control11|><|separator|>
[197]
https://www.leica-microsystems.com/science-lab/life-science/brief-introduction-to-contrasting-for-em-sample-preparation/
[198]
Processing tissue and cells for transmission electron microscopy in ...
Oct 4, 2007 · Osmium tetroxide is highly toxic and must be used under a fume hood. It stains the skin black and its vapors can cause temporary blindness.
[199]
Brief Introduction to Contrasting for EM Sample Preparation
Oct 2, 2013 · The double contrast method of ultrathin sections with uranyl acetate (UA) and lead citrate is the standard contrasting technique for electron ...
[200]
Staining sectioned biological specimens for transmission electron ...
The most common post-staining of sections is done on grids by aqueous uranyl acetate followed by lead citrate.
[201]
Variations on Negative Stain Electron Microscopy Methods - NIH
Feb 6, 2018 · The most commonly used negative staining reagents are uranyl acetate and uranyl formate. These stains have a relatively fine grain size (4 ...
[202]
A Complementary Fixative and Stain to Osmium Tetroxide
Mar 14, 2018 · Ruthenium tetroxide (RuO 4 ), which is a stronger oxidizing agent than osmium tetroxide (OSO 4 ), reacts well with some of the more polar lipids.
[203]
Negative Staining - Central Microscopy Research Facility
Alternate stains include: uranyl acetate, uranyl formate, and ammonium molybdate. If the specimen requires a buffer, ammonium acetate is recommended because it ...