Fact-checked by Grok 2 weeks ago

Sentinel-1

Sentinel-1 is a European radar imaging Earth observation mission within the Copernicus programme, consisting of a constellation of satellites equipped with C-band synthetic aperture radar (SAR) instruments to deliver continuous, all-weather, day-and-night imagery of Earth's land and ocean surfaces for environmental monitoring, security, and emergency response.^[1] The mission features four satellites: Sentinel-1A, launched on 3 April 2014 aboard a Soyuz rocket from Europe's Spaceport in French Guiana; Sentinel-1B, launched on 25 April 2016 using the same launcher; Sentinel-1C, launched on 5 December 2024 via a Vega-C rocket; and Sentinel-1D, launched on 4 November 2025 on an Ariane 6 rocket.^[1] Sentinel-1B experienced a permanent anomaly in December 2021 that rendered its SAR instrument inoperative, leading to the end of its mission in August 2022, after which it was deorbited.^[2] As of November 2025, Sentinel-1A and Sentinel-1C are operational, providing systematic global coverage every six days. Sentinel-1D is undergoing commissioning and will join the constellation to replace Sentinel-1A.^[3] Each satellite has a designed lifetime of 7.25 years, with consumables sufficient for 12 years, ensuring long-term data continuity.^[4] The satellites operate in a sun-synchronous, dawn-dusk orbit at an altitude of 693 km and an inclination of 98.18°, with a 12-day repeat cycle for a single satellite and six days for the full constellation, enabling frequent revisits over any point on Earth.^[5] The primary instrument on each satellite is a C-band SAR operating at 5.405 GHz (wavelength of 5.6 cm), supporting multiple imaging modes including Interferometric Wide Swath (IW) mode with a 250 km swath width and 5 m × 20 m ground resolution, Extra Wide Swath (EW) mode with a 400 km swath and 20 m × 40 m resolution, Stripmap (SM) mode for higher resolution imaging at 5 m × 5 m, and Wave (WV) mode for ocean wave spectra.^[6]^[7] These capabilities allow for high-precision measurements, such as detecting ground deformations smaller than the width of a finger, and support interferometric applications for mapping surface changes.^[8] Key applications of Sentinel-1 data include monitoring Arctic sea ice extent and polar environments, surveillance of marine pollution such as oil spills, ship detection for maritime security, assessment of land surface motions from earthquakes or subsidence, mapping floods and humanitarian crises, and management of forests, agriculture, and soil moisture.^[9] The mission's open data policy ensures free and systematic access to products, fostering widespread use in research, policy-making, and operational services across Europe and globally.^[1]

Mission Overview

Objectives and Scope

The Sentinel-1 mission, as the first constellation within the European Union's Copernicus Earth observation program, is dedicated to providing continuous, all-weather, and day-and-night imaging of Earth's surface using C-band synthetic aperture radar (SAR) technology. Its core objectives focus on monitoring land, ocean, and ice regions to support a wide array of applications, including the detection of ground motion risks, management of forests, water, and soil resources, as well as humanitarian aid efforts on land; sea-ice mapping, oil-spill detection, and ship surveillance in oceanic environments; and assessment of Arctic sea-ice extent for polar studies. These capabilities enable robust contributions to environmental protection by tracking natural disasters and ecosystem changes, climate change assessment through long-term trend analysis in polar and coastal areas, and security operations via maritime traffic monitoring.^[9]^[10] In scope, Sentinel-1 establishes an operational service that began in 2014, delivering free, open-access, and systematically acquired data with global coverage to users worldwide, ensuring reliable radar observations independent of atmospheric conditions or sunlight. This marks it as the inaugural Copernicus mission to operationalize SAR data continuity from prior European efforts, prioritizing fast-response imaging for time-critical events while fostering new applications in evolving environmental and security needs. The mission's design emphasizes high reliability, data stability, and rapid delivery to ground stations, supporting the Copernicus program's goal of comprehensive Earth monitoring services.^[10]^[9] Sentinel-1 integrates seamlessly with other Copernicus Sentinels, particularly by supplying complementary radar data to optical missions like Sentinel-2, which enhances overall Earth observation through combined all-weather and high-resolution visible/near-infrared insights for land and coastal analysis. Each satellite in the constellation is engineered with a nominal design life of 7.25 years, backed by consumables sufficient for up to 12 years of operation, allowing for extended mission duration and redundancy in data provision.^[10]^[9]

Constellation Design

The Sentinel-1 mission is designed as a constellation of satellites to ensure continuous, high-frequency radar imaging for global Earth observation. Initially planned as a two-satellite baseline with Sentinel-1A and Sentinel-1B orbiting 180 degrees apart, the constellation provides a revisit time of six days at the equator, halving the 12-day cycle of a single satellite.^[11]^[12] To enhance redundancy and extend operational life, the constellation has been expanded to four satellites, including Sentinel-1C launched on 5 December 2024 and Sentinel-1D launched on 4 November 2025, maintaining the paired orbital configuration for sustained dual-satellite coverage. As of November 2025, Sentinel-1A and Sentinel-1C are operational, with Sentinel-1D in orbit and undergoing commissioning to join the constellation soon.^[13]^[1] The satellites operate in a sun-synchronous, dawn-dusk orbit at an altitude of 693 km and an inclination of 98.18 degrees, enabling consistent lighting conditions and polar access while minimizing atmospheric interference for radar observations.^[10] This orbital setup shares a common plane with precise 180-degree phasing, optimizing overlap for interferometric applications and ensuring systematic coverage across latitudes.^[14] Following the permanent failure of Sentinel-1B in December 2021 due to a power supply anomaly, the European Space Agency implemented a replacement strategy by accelerating the deployment of Sentinel-1C in 2024 to restore the two-satellite configuration and preserve the six-day revisit capability.^[2]^[15] This approach underscores the constellation's emphasis on redundancy, with Sentinel-1D further bolstering continuity by providing an additional backup unit.^[16] The design prioritizes coverage of polar regions to support monitoring of sea ice and climate dynamics, while enabling global swaths up to 400 km wide for broad-area applications such as maritime surveillance and disaster response.^[12]^[10] This architecture delivers reliable, all-weather data continuity essential for Copernicus services.^[1]

Development and History

Program Background

The Sentinel-1 mission originated within the Global Monitoring for Environment and Security (GMES) program, a joint initiative launched by the European Union (EU) and the European Space Agency (ESA) in 1998 to establish an independent European capacity for Earth observation services supporting environmental monitoring, security, and civil protection. By 2005, baseline requirements for the GMES space segment were defined, emphasizing the need for operational radar imaging to bridge the gap left by the impending end of ESA's ERS and Envisat missions. In November 2008, EU ministers approved the full implementation of the GMES space component at an ESA Ministerial Council meeting in The Hague, allocating initial funding and greenlighting the development of the Sentinel satellite family, with Sentinel-1 designated as the cornerstone radar observatory.^[10]^[7] In December 2012, the GMES program was officially renamed Copernicus by the European Commission, signifying its evolution into a flagship EU initiative for sustained operational Earth observation, with enhanced integration of space, in-situ, and atmospheric data sources. This transition underscored Sentinel-1's role in delivering continuous C-band synthetic aperture radar (SAR) data to Copernicus core services, particularly for land and marine applications. Development accelerated following ESA's selection of Thales Alenia Space Italia as prime contractor in April 2007, culminating in a €229 million contract signed on 18 June 2007 for the design, manufacturing, and testing of Sentinel-1A. A follow-on contract worth approximately €162 million was awarded to the same consortium in March 2010 for Sentinel-1B, ensuring the two-satellite constellation design. In December 2015, ESA awarded Thales Alenia Space a €400 million contract to build Sentinel-1C and 1D.^[17] The SAR instrument subsystem was led by Airbus Defence and Space GmbH, incorporating advanced active phased-array technology.^[18]^[10] Funding for Sentinel-1's development and operations is predominantly sourced from the EU's multiannual financial framework under Copernicus, with ESA contributing technical oversight and an estimated €500 million for the initial constellation (including satellites, launches, and ground segment elements), drawn from the broader €4.3 billion Copernicus space budget for 2007–2020. International partnerships bolster the program, notably with EUMETSAT for complementary data relay and dissemination to enhance global coverage and timeliness. Key milestones included rigorous prototype testing of the SAR antenna and electronics in 2011 at facilities in Europe, validating the instrument's performance under simulated space conditions, and the operational handover of Sentinel-1A to Copernicus services in early 2015 after successful in-orbit verification following its April 2014 launch. These steps marked the mission's shift from development to full operational status, enabling routine data acquisition for European and international users.^[19]^[14]^[10]

Satellite Launches and Status

The Sentinel-1 constellation consists of multiple satellites launched by the European Space Agency (ESA) as part of the Copernicus program to ensure continuous Earth observation capabilities. Sentinel-1A, the first satellite in the series, was launched on 3 April 2014 aboard a Soyuz rocket from Europe's Spaceport in Kourou, French Guiana.^[1] Following successful in-orbit testing and commissioning, it entered operational service in October 2014, providing radar imagery data to users. As of November 2025, Sentinel-1A remains active but is approaching its planned end-of-life in December 2025, having exceeded its design lifetime while continuing to contribute to the constellation's coverage.^[20] Sentinel-1B, the second satellite, lifted off on 25 April 2016, also via a Soyuz launch from Kourou, positioned 180 degrees opposite Sentinel-1A to enable six-day revisit times.^[1] It operated nominally until an anomaly in its instrument electronics power supply occurred on 23 December 2021, rendering it unable to generate science data.^[2] ESA officially declared the end of the Sentinel-1B mission on 3 August 2022, after safe mode recovery attempts failed.^[2] To restore full constellation redundancy, Sentinel-1C was launched on 5 December 2024 aboard a Vega-C rocket from Kourou.^[21] Commissioning activities, including orbit maneuvers and instrument calibration, concluded in early May 2025, after which it became fully operational and began delivering data to the Copernicus ecosystem.^[14] The most recent addition, Sentinel-1D, was deployed on 4 November 2025 via an Ariane 6 rocket from Kourou, marking the maiden operational flight of this launcher for a Copernicus mission.^[3] As of 10 November 2025, the satellite has achieved its initial sun-synchronous orbit, with commissioning—including payload verification and nominal mode transitions—ongoing and expected to complete within several months.^[3] With Sentinel-1B decommissioned, the active constellation of Sentinel-1A and 1C currently provides radar monitoring, with revisit times of 12 days, while Sentinel-1D is in commissioning and expected to restore six-day revisits upon becoming operational.^[10] This configuration maintains the mission's resilience against single-satellite failures until Sentinel-1A's retirement.^[1]

Spacecraft and Instruments

Platform Specifications

The Sentinel-1 satellites are built on a modular platform derived from the Prima bus, developed by Thales Alenia Space, designed for high reliability and long-duration operation in low Earth orbit.^[22] Each satellite has a launch mass of approximately 2,300 kg, including about 154 kg of monopropellant fuel, enabling a design life of 7.25 years with potential extension.^[10] In their stowed configuration for launch, the satellites measure 3.4 m in height, 1.3 m in width, and 1.3 m in depth, expanding to a deployed envelope of 3.9 m x 2.6 m x 2.5 m once in orbit, accommodating the solar arrays and other appendages.^[10] The structural framework consists of a central carbon fiber reinforced plastic (CFRP) core with aluminum sandwich panels, providing lightweight durability and resistance to the harsh space environment while minimizing mass.^[10] This composite material choice reduces overall weight without compromising mechanical integrity, essential for maintaining stability during maneuvers and thermal variations.^[10] Power is generated by two deployable solar array wings equipped with gallium arsenide (GaAs) triple-junction cells, delivering an average of 5.9 kW at end-of-life, sufficient to support all subsystems during nominal operations.^[14] A 324 Ah lithium-ion battery provides energy storage for eclipse periods and peak loads, ensuring uninterrupted functionality with a maximum discharge power exceeding 1,950 W.^[14]^[10] Propulsion is handled by a monopropellant hydrazine system featuring 14 thrusters—six for orbit control and eight for attitude adjustments—allowing precise maintenance of the sun-synchronous orbit and velocity corrections as needed.^[10] Attitude and orbit control is achieved through a three-axis stabilization system, incorporating star trackers for orientation, gyroscopes for rate sensing, and reaction wheels for fine pointing, achieving an accuracy of ≤0.01° per axis and knowledge better than 0.003° per axis, critical for consistent imaging geometry.^[10] Onboard data handling includes a solid-state mass memory recorder with a capacity of 1,443 Gbit for science data, complemented by 32 Gbit for housekeeping, GNSS, and precise orbit determination data, enabling storage of up to several days' worth of acquisitions before downlink via X-band channels.^[10] This storage system supports high-volume data buffering in a radiation-hardened environment, ensuring data integrity throughout the mission.^[10]

C-band Synthetic Aperture Radar

The C-SAR (C-band Synthetic Aperture Radar) is the primary instrument aboard the Sentinel-1 satellites, functioning as an active microwave radar system designed for high-resolution Earth observation in all weather conditions and at any time of day or night.^[10] It operates at a center frequency of 5.405 GHz within the C-band portion of the electromagnetic spectrum, corresponding to a wavelength of approximately 5.6 cm.^[14] This frequency range enables penetration through clouds and vegetation to some extent while providing effective backscatter measurements from various surface types.^[6] The instrument features a deployable active phased array antenna measuring 12.3 m in length and 0.821 m in height, which electronically steers the beam to achieve wide-area coverage without mechanical movement.^[14] C-SAR supports flexible polarization configurations to capture diverse scattering characteristics of targets, including single polarization (HH or VV), dual polarization (HH+HV or VV+VH), and quad polarization (all four combinations: HH, HV, VH, VV) in specialized high-resolution modes.^[10] Spatial resolution varies by operational mode but achieves up to 5 m in azimuth and 5 m in range, enabling detailed imaging of surface features.^[14] The swath width extends to a maximum of 410 km, allowing broad regional monitoring while maintaining interferometric capabilities for applications like deformation mapping.^[6] These parameters are supported by a programmable bandwidth of up to 100 MHz and a peak RF power of 4.368 kW, ensuring robust signal-to-noise ratios across diverse terrains.^[14] The imaging principle of C-SAR relies on synthetic aperture radar techniques, where the satellite's motion along its orbit synthesizes a longer effective antenna aperture to achieve high azimuthal resolution beyond the physical antenna size.^[10] Microwave pulses are transmitted toward the Earth's surface, and the amplitude and phase of the backscattered echoes are recorded to form complex images.^[14] Doppler processing is applied in the azimuth direction to focus the radar beam, compensating for the varying Doppler shifts caused by the platform's velocity and enabling precise range compression and geometric correction.^[6] This approach, combined with terrain observation by progressive scans (TOPS), minimizes scalloping effects and ensures uniform imaging quality over wide swaths.^[10] Calibration of C-SAR maintains radiometric accuracy to within 1 dB (3σ) and stability of 0.5 dB through a combination of internal and external methods.^[10] Internal calibration routes transmit signals directly to the receiver via on-board transponders and waveguides made of metallised carbon-fibre-reinforced plastic, monitoring amplitude and phase stability in real-time using pulse-coded calibration sequences.^[14] External calibration employs ground-based point targets, such as active transponders and passive corner reflectors with known radar cross-sections, along with distributed targets like rainforests, to verify end-to-end system performance during commissioning and routine operations.^[10]

Operations

Orbital Parameters

The Sentinel-1 satellites operate in a sun-synchronous, near-polar orbit designed to ensure consistent illumination conditions and global coverage for radar imaging. The nominal orbit has an altitude of 693 km, an inclination of 98.18°, and a mean local solar time at the ascending node of 18:00, corresponding to a dawn-dusk crossing between 6:00 and 18:00 local time.^[5] This configuration allows the constellation to achieve a repeat cycle of 12 days for a single satellite and 6 days when both satellites are operational, with the two satellites phased 180° apart in the same orbital plane to optimize interferometric applications.^[23] Orbit maintenance is critical for preserving the precision required for high-quality synthetic aperture radar data, particularly for interferometry. The satellites are controlled within a tight orbital tube of 50 m radius (root mean square) around the reference mission orbit, ensuring ground track repeatability better than 100 m (3σ).^[24] Station-keeping maneuvers, performed using the spacecraft's hydrazine thrusters, occur every 2-3 months to enforce across-track dead-band control, primarily at the most northern latitude and the ascending node crossing.^[23] These adjustments maintain the orbit's stability, with precise orbit determination achieving 5 cm 3D RMS accuracy for post-processed ephemerides.^[25] Collision avoidance protocols are integrated into operations to mitigate risks from space debris in low Earth orbit. The European Space Operations Centre (ESOC) monitors conjunction alerts and executes maneuvers when necessary, as demonstrated by multiple thruster firings for Sentinel-1A to evade debris objects. For end-of-life disposal, the mission adheres to space debris mitigation guidelines, with satellites lowered to an orbit ensuring passive atmospheric re-entry within 25 years after mission completion, as implemented for Sentinel-1B in 2024.^[26]

Imaging Modes

The Sentinel-1 mission employs a C-band synthetic aperture radar (SAR) instrument capable of operating in four exclusive imaging modes, each optimized for specific observation requirements by balancing spatial resolution, swath width, and coverage area. These modes—Strip Map (SM), Interferometric Wide Swath (IW), Extra Wide Swath (EW), and Wave (WV)—enable flexible data acquisition over land, coastal regions, and open oceans, with the instrument supporting single or dual polarization configurations across most modes to enhance the detection of surface properties.^[6]^[4] In Strip Map (SM) mode, the radar achieves a high spatial resolution of 5 m in both azimuth and ground range directions across an 80 km swath width, making it suitable for detailed interferometric applications such as monitoring subtle surface deformations. This mode maintains a fixed incidence angle range of approximately 20° to 47° and supports single (HH or VV) or dual (HH+HV or VV+VH) polarization, providing continuity with heritage missions like ERS and Envisat for precise, localized observations.^[6]^[27] Interferometric Wide Swath (IW) mode offers a resolution of 5 m in azimuth by 20 m in ground range over a 250 km swath, utilizing Terrain Observation by Progressive Scans (TOPS) across three sub-swaths to ensure uniform imaging quality. As the primary operational mode for both land and sea surfaces, it operates at incidence angles of 31° to 46° and supports single or dual polarization, enabling high-resolution interferometry for change detection over large areas.^[6]^[28] The Extra Wide Swath (EW) mode provides coarser resolution of 20 m azimuth by 40 m ground range but covers a broad 400 km swath using TOPS with five sub-swaths, ideal for regional-scale monitoring of extensive phenomena. It spans incidence angles from 20° to 47° and accommodates single or dual polarization, facilitating wide-area surveillance while maintaining compatibility with interferometric processing.^[6]^[27] Wave (WV) mode captures high-resolution vignettes of 5 m azimuth by 5 m ground range within 20 km × 20 km blocks, sampled at 100 km intervals along the orbit track, primarily for deriving ocean wave spectra including direction, wavelength, and height. Operating at fixed incidence angles around 23° and 37° with single polarization (HH or VV), this mode focuses on open ocean areas to support marine environmental analysis.^[28]^[4] Mode selection and tasking for Sentinel-1 acquisitions follow a priority-based system driven by predefined scenarios from Copernicus services and member state requirements, incorporating user requests for urgent needs while relying on automated planning to resolve conflicts and optimize the 25-minute SAR duty cycle per orbit. High-priority systematic mapping, such as over tectonic or flood-prone regions, typically favors IW or WV modes, with SM reserved for exceptional high-resolution demands, ensuring efficient coverage with a 12-day repeat cycle (six days when both satellites are operational).^[27]

Data Management

Acquisition Process

The Sentinel-1 satellites generate raw Level-0 data (compressed using Flexible Dynamic Block Adaptive Quantization (FDBAQ)) at a volume of up to approximately 1.2 TB per day per satellite, capturing unfocused synthetic aperture radar echoes before ground-based refinement.^[29] This high data rate stems from the C-band SAR instrument's continuous imaging in operational modes, enabling global coverage while prioritizing areas defined by mission priorities.^[10] Onboard the satellites, raw SAR data undergo processing including FDBAQ compression to reduce volume by factors of 4 to 8, alongside formatting into standardized slices for storage and transmission.^[30] The compressed data are stored in a solid-state recorder with a capacity of approximately 1.4 Tbit, allowing buffering during non-contact periods.^[30] Transmission occurs via dual X-band channels at a combined rate of 520 Mbit/s to ground stations during orbital passes, typically limited to 20-30 minutes per orbit to manage thermal and power constraints.^[30] Upon reception, the ground segment—managed by ESA's Payload Data Ground Segment—handles initial data ingestion at core X-band stations including Svalbard (Norway), Kiruna (Sweden), Matera (Italy), and Maspalomas (Spain), with additional collaborative stations for extended coverage.^[31] These stations perform preliminary calibration to correct for instrument biases and generate quick-look products, such as low-resolution browse images, within minutes to hours for operational assessment and near-real-time applications.^[31] The acquisition process is governed by a tasking system that balances systematic global coverage with user-specific requests, coordinated through Copernicus services and ESA's mission planning tools.^[32] Long-term acquisition plans, updated every 6-12 months, establish conflict-free observation scenarios prioritizing Copernicus needs like environmental monitoring, while ad-hoc tasking allows dynamic reprogramming for urgent events via interface with service providers.^[32]

Data Products and Access

Sentinel-1 data are processed into several levels to support a range of applications, starting from raw acquisitions and progressing to higher-level geophysical products. Level-0 products consist of compressed, unfocused raw data captured directly from the instrument source packets, including standard, calibration, noise, and annotation data, typically around 1 GB per Interferometric Wide (IW) swath acquisition.^[33] These raw data serve as the input for further processing but are not directly usable for analysis. Level-1 products are generated through focusing algorithms, producing Single Look Complex (SLC) data, which preserve phase and amplitude information in slant-range geometry for applications like interferometry (InSAR), with file sizes of approximately 4-8 GB depending on polarization mode.^[34] Complementing SLC, Level-1 Ground Range Detected (GRD) products provide multi-looked, detected intensity images projected onto the ground range, reducing speckle and facilitating amplitude-based analyses, at about 1 GB per IW swath.^[33] Level-2 products derive geophysical parameters from Level-1 inputs, primarily focused on marine applications, such as Ocean Swell Spectra (OSW), Ocean Wind Fields (OWI), and Radial Surface Velocity (RVL) for wind speed, direction, wave spectra, and current estimates.^[34] These products enable direct interpretation without additional processing for specific oceanographic uses. Additionally, Precise Orbit Determination (POD) products, including resorbit, predicted, medium, and precise orbit files, support geolocation accuracy enhancements across all levels.^[34] All Sentinel-1 products are distributed in the Standard Archive Format for Europe (SAFE), a self-describing XML-based container that includes image data, metadata, and annotations for interoperability.^[35] Image data within SAFE are formatted as 16-bit GeoTIFF for SLC and GRD products, with 8-bit PNG quicklooks for previews, while Level-2 ocean products use netCDF for multidimensional geophysical variables.^[34] These adhere to Committee on Earth Observation Satellites (CEOS) standards for Synthetic Aperture Radar (SAR) data, particularly for Analysis Ready Data (ARD) variants like radiometrically terrain-corrected (RTC) backscatter, ensuring compatibility with global processing chains and tools such as the Sentinel-1 Toolbox.^[36] For InSAR applications, SLC products are specifically formatted to maintain phase coherence, supporting differential interferometry workflows.^[34] Public and scientific access to Sentinel-1 data is provided free of charge through the Copernicus Data Space Ecosystem, the primary portal succeeding the Copernicus Open Access Hub (previously known as SciHub), which closed in October 2023. As of November 2025, the ecosystem continues to provide seamless access, supporting the increased data volumes from the full constellation including recently launched Sentinel-1D.^[37]^[38] Users register via the ecosystem at dataspace.copernicus.eu to search, download, and process data interactively, with options for bulk access, API integration, and cloud-based analytics to handle the mission's high data rates.^[38] As of 2025, the archived volume of Sentinel-1 data exceeds 20 petabytes, reflecting over a decade of continuous acquisitions and supporting long-term monitoring needs.^[39] With the launches of Sentinel-1C in December 2024 and Sentinel-1D in November 2025, the constellation's data generation capacity has been restored to full operational levels, increasing daily volumes and necessitating scalable cloud-based processing in the Copernicus Data Space Ecosystem.^[1] The European Space Agency (ESA) maintains data quality through monthly status and quality reports, issued by the Sentinel-1 Mission Performance Centre, which detail instrument performance, product accuracy, calibration updates, and any anomalies affecting availability or geolocation precision. These reports, available via the Copernicus portal, include disclaimers on known issues like radiometric biases or orbit errors, ensuring users can assess data reliability for specific applications; annual performance summaries compile these for broader trends.^[40]

Applications

Land and Environmental Monitoring

Sentinel-1's C-band synthetic aperture radar (SAR) capabilities enable precise monitoring of land subsidence through interferometric synthetic aperture radar (InSAR) time-series analysis, achieving millimeter-level deformation measurements over urban and rural areas. In Mexico City, persistent scatterer InSAR (PSInSAR) and small baseline subset (SBAS) techniques applied to over 300 Sentinel-1 images from 2014 to 2020 revealed subsidence rates exceeding 30 cm/year in districts like Iztapalapa and Nezahualcóyotl, with peaks reaching -39.1 cm/year, primarily driven by groundwater extraction. These observations highlight the mission's role in identifying high-risk zones affecting millions of residents and infrastructure, such as the Metropolitan Cathedral subsiding at -8.8 cm/year.^[41] In agriculture, Sentinel-1 supports crop monitoring by detecting backscatter changes associated with vegetation growth and phenological stages, allowing for the assessment of crop health and yield potential without optical data limitations. For instance, dual-polarization (VV/VH) backscatter variations from Sentinel-1 have been used to track rice cultivation cycles in the Mekong Delta, Vietnam, with acquisitions every 6-12 days revealing field flooding and harvest patterns. Additionally, soil moisture estimation benefits from Sentinel-1's sensitivity to dielectric properties, where radiative transfer models applied to C-band data over the Po Valley, Italy, from 2016-2019 produced 1 km resolution maps with correlations up to 0.6 against in situ measurements, aiding irrigation management and drought assessment.^[42]^[43] For forestry applications, Sentinel-1 facilitates deforestation detection through time-series analysis of backscatter intensity, capturing abrupt changes in radar returns from canopy disturbances even under cloud cover. An unsupervised Bayesian online change detection method using Sentinel-1 VV and VH polarizations achieved F1-scores of 97.3% for small-scale (0.1-1 ha) forest loss events in the Amazon, outperforming global systems like GLAD by detecting changes nearly two months earlier. Biomass mapping leverages polarimetric data from Sentinel-1's dual-polarization mode, where VH backscatter correlates with forest structure; combined with Sentinel-2, it estimated aboveground biomass in tropical regions like the Shoolpaneshwar Wildlife Sanctuary, India, with root mean square errors below 50 Mg/ha for densities up to 300 Mg/ha. In the Amazon basin, processing over 450 TB of Sentinel-1 data from 2015-2021 via data cubes identified 5.2 million hectares of forest loss, equivalent to the size of Costa Rica, with Brazil's 2021 losses exceeding 1 million hectares.^[44]^[45]^[46] Environmental monitoring with Sentinel-1 extends to wetland mapping and glacier dynamics, utilizing its all-weather imaging for dynamic surface characterization. In the St. Lucia wetlands, South Africa, temporally dense Sentinel-1 data in VV/VH mode delineated wetland boundaries and vegetation types with 88.5% accuracy when fused with Sentinel-2, effectively capturing moisture variations in herbaceous and wooded areas. For glacier flow, offset-tracking on Sentinel-1 interferograms measures ice velocity in polar regions; in the Arctic's Svalbard archipelago, monitoring of Negribreen glacier revealed a surge acceleration from 1 m/day to 13 m/day starting in July 2016, contributing to broader assessments of ice mass loss and sea-level rise projections.^[47]^[48]

Marine and Maritime Surveillance

Sentinel-1's C-band synthetic aperture radar (SAR) capabilities enable all-weather, day-and-night monitoring of marine environments, providing critical data for oceanographic research and maritime operations. The mission's wide swath imaging modes, particularly the Extra Wide (EW) mode, facilitate large-scale observations of ocean surfaces, supporting applications in sea ice dynamics, pollution detection, vessel tracking, and surface state estimation. These features address key challenges in maritime surveillance, such as navigating harsh weather conditions and remote areas, by delivering high-resolution imagery that reveals subtle changes in backscatter patterns indicative of environmental and human activities.^[49] Sea ice monitoring benefits significantly from Sentinel-1's EW mode, which covers extensive polar regions to track ice extent and concentration in the Arctic and Antarctic. Dual-polarization configurations, such as HH+HV, enhance ice charting by distinguishing ice types through backscatter differences, while HH polarization suffices for drift monitoring by correlating features across sequential images. Automated algorithms process Sentinel-1 SAR data to estimate ice drift velocities, with analyses of over 1,500 images demonstrating reliable tracking over 18-month periods in both polar regions. This supports navigation safety and climate studies by providing near-real-time updates on ice boundaries and movement.^[50]^[51] Oil spill detection relies on Sentinel-1's ability to identify dark spots in SAR imagery, where reduced radar backscatter from slick-covered surfaces contrasts with surrounding waters. These signatures arise from the damping of capillary waves by oil, allowing detection of spills regardless of daylight or cloud cover. Validation often integrates Sentinel-1 data with ultraviolet/visible (UV/VIS) sensor observations from complementary missions, confirming spill presence and composition through spectral analysis. Such combined approaches have proven effective in rapid response to maritime incidents, aiding environmental protection efforts.^[27]^[52] Ship detection utilizes constant false alarm rate (CFAR) algorithms applied to Sentinel-1 SAR images to identify vessels by thresholding backscatter intensity against sea clutter. These methods adapt to varying ocean conditions, enabling the spotting of both cooperative (AIS-equipped) and non-cooperative vessels, which is vital for surveillance of illegal fishing and unregulated activities. Processing chains, such as those in the ESA SNAP toolbox, generate land-masked detections that support global maritime domain awareness, including monitoring exclusive economic zones for unauthorized incursions.^[53]^[54]^[55] Level-2 ocean products from Sentinel-1 derive wind fields, swell wave spectra, and radial velocities from SAR observations, offering insights into sea state parameters like significant wave height and wind speed. These geophysical products, generated through inversion models applied to wave mode data, assist offshore industries such as shipping and renewable energy by forecasting hazardous conditions and optimizing operations. For instance, wave spectra support route planning in rough seas, while wind estimates aid turbine site assessments in marine environments.^[56]^[57]

Emergency Response and Security

Sentinel-1 plays a critical role in emergency response by providing all-weather, day-and-night radar imagery that enables rapid assessment of disasters, supporting the Copernicus Emergency Management Service (CEMS) in delivering geospatial information for crisis management worldwide.^[58] Its C-band synthetic aperture radar (SAR) acquires data with a resolution of up to 10 meters, often within hours of an event, facilitating timely interventions in scenarios where optical satellites are limited by cloud cover or darkness.^[59] In earthquake monitoring, Sentinel-1 employs Interferometric SAR (InSAR) techniques to measure co-seismic surface deformation by comparing phase differences in pre- and post-event images, revealing fault ruptures and ground displacement patterns essential for damage assessment and hazard modeling.^[60] A prominent example is the 2016 Mw 7.8 Kaikoura earthquake in New Zealand, where Sentinel-1 InSAR data captured complex rupture propagation across over 20 faults spanning 180 km, with maximum displacements exceeding 10 meters horizontally, aiding in understanding the event's tectonic impacts and supporting rapid recovery efforts.^[61] For flood mapping, Sentinel-1 analyzes backscatter intensity from SAR signals to delineate water extent, as flooded areas exhibit distinct low-backscatter signatures compared to dry land, enabling near-real-time inundation maps even under heavy cloud cover.^[42] This capability is often activated through the International Charter 'Space and Major Disasters,' a collaboration of space agencies including the European Space Agency (ESA), which provides free Sentinel-1 data upon disaster declaration to support emergency mapping services for events like riverine floods.^[62] Sentinel-1 supports landslide and volcano monitoring through pre- and post-event change detection, using amplitude or coherence analysis of SAR images to identify terrain alterations such as slope failures or ground uplift indicative of instability.^[63] In landslide cases, this method detects disruptions in surface backscattering, as demonstrated in rapid assessments following heavy rainfall or seismic triggers, while for volcanoes, InSAR tracks subtle deformation precursors to eruptions, complementing ground-based networks for early warnings.^[60] In security applications, Sentinel-1 contributes to border surveillance by detecting unauthorized crossings and infrastructure changes along remote frontiers through persistent SAR monitoring, integrated into CEMS to enhance EU policy support in crisis prevention and response.^[64] For pipeline monitoring, it identifies leaks or encroachments via change detection in backscatter patterns over linear infrastructure, as shown in ESA-supported projects tracking anomalies in oil and gas lines across challenging terrains.^[65] Overall, these security uses leverage Sentinel-1's systematic acquisitions within the Copernicus framework to provide actionable intelligence for protecting critical assets.^[58]

References

[1]
ESA - Sentinel-1 - European Space Agency
The Copernicus Sentinel-1 mission is designed as a two-satellite constellation. Each satellite carries an advanced radar instrument to provide an all-weather, ...
[2]
Mission ends for Copernicus Sentinel-1B satellite - ESA
Aug 3, 2022 · ESA and the European Commission announce that it is the end of the mission for Sentinel-1B. Copernicus Sentinel-1A remains fully operational.
[3]
https://www.esa.int/Applications/Observing_the_Earth/Copernicus/Sentinel-1/Sentinel-1D_reaches_orbit_on_Ariane_6
[4]
[PDF] Sen$nel-‐1 Instrument Overview - ESA Earth Online
Sentinel-1 is a dual satellite system with a 7.25 year orbit, providing SAR data for marine, land, and climate monitoring, with a 12 day global coverage.
[5]
[PDF] SENTINEL-1 Mission Overview - eo4society
Feb 2, 2017 · Data continuity of ERS and ENVISAT missions. ✓ Copernicus radar imaging mission for ocean, land, emergency. ✓ Applications:.
[6]
ESA - Instrument - European Space Agency
Interferometric Wide swath mode, the default mode over land, has a swath width of 250 km and a ground resolution of 5 x 20 m. This mode images in three sub- ...Missing: specifications | Show results with:specifications
[7]
[PDF] Sentinel-1 - European Space Agency
– Extra-wide Swath Mode, 400 km swath and 25 x 100 m spatial resolution. (3-looks); ... The SAR instrument will be operated in conflict- free sensing modes as ...Missing: specifications | Show results with:specifications
[8]
https://www.esa.int/Applications/Observing_the_Earth/Copernicus/Sentinel-1/Sentinel-1_mission_did_you_know
[9]
ESA - Introducing Sentinel-1 - European Space Agency
The Sentinel-1 mission is designed as a constellation of two satellites orbiting 180° apart, which can image the entire Earth every six days.
[10]
Copernicus: Sentinel-1 - eoPortal
The objective of Sentinel-1 is to assure C-band SAR data continuity for the user community currently provided by Envisat and ERS-2. Three priorities (fast-track ...
[11]
ESA - Satellite constellation - European Space Agency
The Sentinel-1 mission is designed as a two-satellite constellation. The identical satellites orbit Earth 180° apart and at an altitude of almost 700 km.
[12]
Sentinel-1 - NASA Earthdata
Sentinel-1 is a twin satellite constellation using C-band radar for all-weather imagery, monitoring sea-ice, marine environment, and land-surface. Sentinel-1C ...
[13]
Follow the launch of Sentinel1-D - ESA Earth Online
Oct 31, 2025 · Sentinel-1D, the fourth satellite in the Sentinel-1 constellation, is scheduled for launch at 21:02 UTC on 4 November. Watch the launch live.
[14]
S1 Mission - SentiWiki - Copernicus
Sentinel-1 main Mission Objectives and Applications are: Global land masses ... The Copernicus Sentinel-1 Observation Scenario is made available by ESA here.
[15]
Sentinel-1B replacement secures a ride - Payload Space
Apr 11, 2022 · With the failure of Sentinel-1B, ESA had been looking at options to get Sentinel-1C into orbit as soon as possible. This latest announcement ...
[16]
https://www.airbus.com/en/newsroom/stories/2025-11-sentinel-1d-the-radar-that-never-sleeps
[17]
Contract signed for building of GMES Sentinel-1 satellite - ESA
Jun 18, 2007 · ESA and Thales Alenia Space have signed a €229 million contract for the design and development of Sentinel-1, the first Earth observation ...Missing: 2008 2010
[18]
New financial resources for Copernicus space component - ESA
Jan 22, 2019 · An amendment to the current Copernicus Agreement has been signed by the EU and ESA, adding €96 million to ESA's space component budget.
[19]
Sentinel-1A - Wikipedia
Launch. Sentinel-1A was launched on 3 April 2014 by a Soyuz rocket at 21:02:31 GMT (23:02:31 CEST). The first stage separated 118 seconds later, followed by ...
[20]
Sentinel-1 A Satellite Mission Summary | CEOS Database
Mission status: operational (extended), was launched on 3 April 2014, and ... Launch Date. 03 Apr 2014. Mission Links. mission site |. EOL Date. Dec 2025. EO ...
[21]
Double win for Europe: Sentinel-1C and Vega-C take to the skies
Sentinel-1C was launched into orbit on 5 December, lifting off aboard Vega-C at 22:20 CET (18:20 local time). The launch proceeded smoothly, with the rocket ...
[22]
Sentinel-1C User Data Opening from 26th of March
ESA is pleased to announce that initial access to Sentinel-1 data is available on the Copernicus Data Space Ecosystem starting 26th March.
[23]
https://earth.esa.int/eogateway/documents/20142/0/4_Sentinel1_SystemOveview-PolInSAR.pdf
[24]
https://earth.esa.int/eogateway/documents/20142/37627/FRINGE-2011-Sentinel-1-System-Overview.pdf
[25]
[PDF] GMES Sentinel-1 System Overview - ESA Earth Online
Provide routinely and systematically SAR data to GMES services and National services focussing on the following applications.
[26]
[PDF] Sentinel-1 System Overview - Semantic Scholar
Constellation of two satellites (A & B units). • C-Band Synthetic Aperture Radar Payload. • Near-Polar sun-synchronous (dawn-dusk) orbit at 693 km altitude.
[27]
[PDF] Results from the Sentinel-1A Commissioning Phase - SEOM
Sentinel-1 Orbital Tube and InSAR Baseline. • Reference orbit was reached on ... • Specified Orbital Tube radius of 50 (rms). ⇒ equivalent to ground ...
[28]
ESA - Sentinel-1B journeys back to Earth - European Space Agency
On 23 December 2021, Sentinel-1B suffered a failure in the platform unit that powered the Synthetic Aperture Radar, causing the payload to become inoperative.
[29]
[PDF] Sentinel-1 Mission Operations Concept - ESA Earth Online
Applications: • monitoring sea ice zones and the arctic environment. • surveillance of marine environment (e.g. oil spill monitoring).
[30]
ESA - Facts and figures - European Space Agency
Launch: Sentinel-1A on 3 April 2014. Sentinel-1B on 25 April 2016. Sentinel-1C on 5 December 2024. Sentinel-1D on 4 November 2025.<|control11|><|separator|>
[31]
[PDF] Sentinel-1 Processor and Core products - ESA Earth Online
• S-1 Product Format Specification. • S-1 Detail Processing Model. – For L1 and L2. • S-1 Auxiliary Data File format. Specification. • S-1 IPF interface control ...
[32]
[PDF] Sentinel-1 Mission Operations Concept - Semantic Scholar
Sentinel-1 SAR can be operated in 4 exclusive imaging modes with different resolution and coverage: For all of these operating modes, the same family of ...Missing: specifications | Show results with:specifications
[33]
ESA - Data flow - European Space Agency
Once the Sentinel data are acquired on-board, they are sent to ground and received at the X-band core stations located in Matera, Italy, Maspalomas, Spain and ...
[34]
https://sentiwiki.copernicus.eu/web/s1-processing
[35]
ESA - Data products - European Space Agency
Sentinel-1's radar can operate in four modes: Interferometric Wide Swath (IW), Extra Wide Swath (EW), Wave (WV) and Stripmap (SM).
[36]
S1 Processing - SentiWiki
Raw SAR data compression is used to reduce the instrument data rate to fit the available data downlink. Application of a Block Adaptive Quantisation-like (BAQ) ...
[37]
Data Formats in Depth | Alaska Satellite Facility
Sentinel-1 products of all processing levels are delivered in the Standard Archive Format for Europe (SAFE) format. The SAFE format packages the data as a file ...
[38]
Sentinel-1 Radar Products Certified to Plug-and-Play Metadata ...
Dec 11, 2024 · This marks the first NASA SAR data collection to be certified as CEOS-ARD compliant. "The OPERA products are ready for GIS analysis out of ...
[39]
Copernicus Open Access Hub is Closing End of October 2023
Oct 26, 2023 · The Copernicus Open Access Hub is closing at the end of October 2023. Users must migrate to dataspace.copernicus.eu for Sentinel data access.Missing: portals | Show results with:portals
[40]
Sentinel-1 - Copernicus Data Space Ecosystem
The Sentinel-1 mission comprises a constellation of two polar-orbiting satellites, operating day and night. These satellites use C-band synthetic aperture radar ...Missing: regions | Show results with:regions
[41]
Sentinel data variety and volume
Nov 4, 2021 · The CEDA Archive now holds over 10 Petabytes of satellite data from the Sentinels this increases in volume at over 7 Terabytes per day.
[42]
Sentinel-1 MPC News
Mar 4, 2022 · We endorsed on 2025-11-29 the first operational version of those ADF for Sentinel-1D and we are looking forward to its launch today 2025-11-04 ...
[43]
Present-day land subsidence rates, surface faulting hazard and risk ...
Over 300 Sentinel-1 SAR scenes are used to monitor land subsidence in Mexico City. · InSAR reveals vertical displacement rates as high as −39 cm/year in 2014– ...
[44]
10 ways Sentinel-1 data lets us 'see' our world - ESA
Nov 27, 2024 · Sentinel-1 is an invaluable tool for monitoring deforestation, thanks to its Synthetic Aperture Radar (SAR) technology, as it allows for the ...
[45]
Soil moisture retrieval from Sentinel-1 using a first-order radiative ...
Sep 1, 2023 · This paper presents the retrieval of high resolution ( 1 km) soil moisture data from Sentinel-1 C-band Synthetic Aperture Radar (SAR) backscatter measurements
[46]
Novel unsupervised Bayesian method for Near Real-Time forest ...
A recent deforestation monitoring approach using Sentinel-1 data applies the CuSum (Cumulative Sum) algorithm to dual-polarization VV-VH observations to detect ...
[47]
Synergistic evaluation of Sentinel 1 and 2 for biomass estimation in ...
Feb 15, 2022 · The present study attempts to integrate Sentinel-2 optical data with Sentinel-1 SAR dataset to estimate AGB in the Shoolpaneshwar Wildlife Sanctuary (SWS), ...
[48]
Using a data cube to monitor forest loss in the Amazon - ESA
Mar 7, 2023 · With this approach, the project demonstrates the use of Sentinel-1 data to create a dynamic deforestation analysis over the Amazon basin.
[49]
Mapping wetland characteristics using temporally dense Sentinel-1 ...
The aim of our research was to study the use of the high-resolution and temporally dense Sentinel-1 and -2 data for wetland mapping in multiple levels of ...
[50]
ESA - Negribreen on the move - European Space Agency
“Sentinel-1 provides us with a near-realtime overview of glacier flow across the Arctic, remarkably augmenting our capacity to capture the evolution of glacier ...
[51]
[PDF] Sentinel-1 Mission Operations Concept - Semantic Scholar
Sentinel-1 SAR can be operated in 4 exclusive imaging modes with different resolution and coverage: For all of these operating modes, the same family of ...
[52]
[PDF] Sentinel High Level Operations Plan (HLOP) - ESA Earth Online
Jun 7, 2012 · ... monitoring). Polarisation: - HH+HV for ice charting. - HH acceptable for ice drift monitoring (Arctic, Antarctic). ➢ Oil spill monitoring (and ...
[53]
[PDF] Sea ice conditions from SAR-2 - eo4society
Jun 16, 2018 · Automated algorithm for sea Ice drift from Sentinel-1 images. Ref. Muckenhuber et al., 2016. Analysed 1500. SAR images over 18 months, both HH ...Missing: EW | Show results with:EW
[54]
Oceanography Posters - LPS16 - European Space Agency
May 10, 2016 · Data from radar sensors ERS-2 SAR, Envisat ASAR, Sentinel-1, Radarsat 1,2, as well as visible and infrared data from Envisat Meris, Landsat ...
[55]
[PDF] Integrated Service for Surveillance of Illegal, Unlicensed and ...
Vessel detection in Sentinel-1 SAR data. Block-diagram of Sentinel-1 vessel detection algorithm. - processing chain based on ESA SNAP. - land mask generated ...
[56]
[PDF] ocea01 - ship detection with sentinel-1 using snap s-1 toolbox
Ship detection with Sentinel-1 falls into the non-cooperative category and enables detection of vessels not carrying AIS or other tracking system on board such ...
[57]
[PDF] POLinSAR 2013 - ESA Earth Online
False Alarm Rate (CFAR) detection schemes have been broadly developed and applied[1]. However, when making use of these methods, some difficulties may be ...<|separator|>
[58]
[PDF] Sentinel-1 Product Definition
Mar 25, 2016 · This section presents an overview of the Sentinel-1 Level 2 products and their properties. ... 6-2. 6.2. Product Type Descriptions. 6.2.1. Ocean ...
[59]
[PDF] A Marine Collaborative Ground Segment for the Sentinel1 missions
Jun 22, 2012 · Document with a short introduction to spatial remote sensing with SAR, and a description of Wind, Waves & Current L2/L3 products main features, ...
[60]
OBSERVER: Celebrating a Decade of Copernicus Sentinel-1
Apr 3, 2024 · Although Sentinel-1B was retired on August 3, 2020 due to an electrical failure, Sentinel-1A remains fully operational, and has far exceeded ...
[61]
ESA - Emergency response - European Space Agency
The C-band synthetic aperture radar on Sentinel-1 can provide images with a resolution of 10 m and within hours of acquisition to aid emergency response.
[62]
S1 Applications - SentiWiki - Copernicus
Finally, Sentinel-1 is designed specifically to provide images for rapid response to disasters such as floods and earthquakes.
[63]
Transpressional Rupture Cascade of the 2016 Mw 7.8 Kaikoura ...
Feb 12, 2018 · The 2016 M w 7.8 Kaikoura earthquake, New Zealand, involved the rupture of at least 21 faults, propagating from southwest to northeast for about 180 km.2 Data And Methods · 3 Results · 3.2 Coseismic Slip...<|separator|>
[64]
International Charter Space and Major Disasters - ESA Earth Online
With the combined resources of the Charter's virtual satellite constellation, many different types of disaster are monitored, including floods, storms, ...
[65]
Sentinel-1 SAR Amplitude Imagery for Rapid Landslide Detection
Mar 29, 2019 · This study applied photo-interpretative methods to detect landslides in measures of changes of amplitude in pre- and post-event Sentinel-1 ...
[66]
ESA - Security services - European Space Agency
The objective of the Copernicus Security Services is to support the related European Union policies in the following priority areas: Border surveillance ...Missing: pipeline EMS
[67]
Sentinels bring solutions to pipeline monitoring
May 25, 2017 · Satellites, such as the Sentinels of the European Copernicus programme are excellent for detecting change. Images from these satellites greatly ...