Two-way radio
A two-way radio, also known as a transceiver, is a wireless communication device that enables bidirectional transmission and reception of voice or data signals between users on the same frequency, typically for short- to medium-range person-to-person or group coordination.[1] These radios operate primarily in licensed or unlicensed land mobile radio services, such as the Private Land Mobile Radio Services (PLMRS), which support internal communications for businesses, governments, and organizations without interconnection to public telephone networks.[1] The development of two-way radios traces back to the early 20th century, with initial mobile radio experiments in the 1890s for maritime use, evolving to public safety applications by 1921 when Detroit police deployed the first radio-equipped patrol cars.[2] Key milestones include Bell Labs' 1924 demonstration of the first voice-based two-way radio telephone in a vehicle and widespread adoption during World War II for military coordination, leading to post-war commercialization in services like police, fire, and utilities.[2] Today, two-way radios encompass analog and digital technologies, operating in frequency bands such as VHF low-band (30–50 MHz) and high-band (150–174 MHz) and UHF (450–512 MHz), with features like trunking for efficient channel sharing and repeaters to extend range.[1] Notable applications span public safety for emergency response, transportation for fleet management, industrial sectors like utilities and petroleum for operational safety, and consumer uses in family radio services (FRS) for short-distance group activities.[1] As of 1996, over 12 million transmitters were licensed in the U.S. under PLMRS, highlighting their role in critical infrastructure and daily coordination where cellular coverage may be unreliable.[1] Modern advancements integrate data capabilities, enhancing reliability in diverse environments from construction sites to remote field operations.[1] These systems are used globally, with standards like TETRA in Europe and APCO P25 in North America.Fundamentals
Definition and Operation
A two-way radio is a communication device that enables real-time bidirectional voice transmission between users over radio frequencies, allowing both parties to send and receive signals, in contrast to one-way broadcast systems that only transmit to receivers.[3] These devices operate within designated radio services, such as land mobile radio, facilitating private or public interactions for applications like coordination and emergency response.[4] The core operational principles involve modulating a voice signal onto a radio frequency carrier wave for transmission and demodulating it upon reception. Common modulation techniques include amplitude modulation (AM), where the amplitude of the carrier varies with the voice signal while frequency remains constant, and frequency modulation (FM), where the carrier frequency shifts proportionally to the audio input for improved noise resistance.[5] Transmission occurs via an antenna that radiates the modulated electromagnetic waves, which propagate through space to the receiving antenna, where the signal is amplified, demodulated, and converted back to audible sound. Two-way radios typically employ simplex or half-duplex modes, using push-to-talk functionality to alternate between transmission and reception on a single frequency, though full-duplex operation—enabling simultaneous two-way communication—can be achieved with separate frequencies for transmit and receive or advanced filtering.[6] At the physics level, two-way radio communication relies on the propagation of radio waves, which travel at the speed of light in a vacuum and follow paths such as direct line-of-sight, ground reflection, or diffraction around obstacles, depending on environmental factors like terrain and atmosphere. A carrier frequency serves as the base for modulation, with voice signals requiring a bandwidth of approximately 300 to 3400 Hz to capture intelligible speech, though the overall channel bandwidth accommodates modulation sidebands, typically spanning several kilohertz.[7] Effective range varies with power output, antenna design, and propagation conditions, but signals generally diminish with distance due to free-space path loss.[8] Representative examples include handheld walkie-talkies, such as those in the Family Radio Service, which support short-range simplex communication over distances of a few kilometers in open areas for personal or group use. In contrast, base stations with higher power and directional antennas enable longer-range coordination, often integrating repeaters to extend coverage for professional operations like public safety.[4]Key Components
The transmitter in a two-way radio is responsible for generating and amplifying radio frequency signals to broadcast audio information. It typically includes an oscillator that produces the carrier wave at the desired frequency, a modulator that superimposes the voice signal onto this carrier using techniques such as amplitude or frequency modulation, and a power amplifier that boosts the signal for transmission.[9] The receiver processes incoming radio signals to extract and reproduce the original audio. Key subcomponents include a mixer that converts the high-frequency input to an intermediate frequency (IF) for easier handling, an IF amplifier that strengthens the signal while filtering noise, and a detector (or demodulator) that separates the audio from the carrier wave.[9] In modern two-way radios, the transmitter and receiver are integrated into a single transceiver unit to enable bidirectional communication in a compact form factor. This integration often incorporates a duplexer, a device that allows simultaneous transmission and reception by isolating the high-power transmit signal from the sensitive receiver circuitry, typically using separate frequency offsets or cavity filters.[10] Antennas serve as the interface between the transceiver and the electromagnetic environment, radiating transmitted signals and capturing incoming waves; common types for portable two-way radios include flexible whip antennas tuned to VHF or UHF bands for omnidirectional coverage. Proper impedance matching, usually to 50 ohms, is essential to maximize power transfer and minimize signal reflections, often achieved through built-in networks or baluns. Power supplies power these components, with portable units relying on rechargeable lithium-ion batteries for mobility (typically providing 8-24 hours of operation depending on duty cycle), while base stations use AC mains for continuous use.[11][12] The user interface facilitates interaction, featuring a microphone to capture voice input, a speaker or earpiece for audio output, and a push-to-talk (PTT) button that switches the device from receive to transmit mode. Advanced models include LCD displays for channel selection, volume control, and status indicators like battery level or signal strength.[12] Auxiliary features in sophisticated two-way radios enhance functionality and security; encryption modules employ algorithms like AES-256 to scramble voice data, preventing unauthorized interception in sensitive applications such as public safety. GPS receivers enable location tracking by integrating satellite signals to provide real-time coordinates, often displayed on the device or transmitted to a dispatch system for asset management.[13]History
Early Development
The development of two-way radio technology traces its roots to late 19th-century advancements in wireless communication. In the 1890s, Guglielmo Marconi pioneered wireless telegraphy, filing a British patent in 1896 for a system that transmitted Morse code signals using electromagnetic waves, laying the groundwork for untethered signaling.[14] Early experiments with voice transmission followed soon after; on December 23, 1900, Reginald Fessenden achieved the first successful radio transmission of human voice over a distance of about one mile between two towers on Cobb Island, Maryland, using an alternator and antenna setup.[15] These precursors shifted communication from wired telegraphs to wireless methods, though initial systems were limited to short-range, non-voice applications. Practical two-way radio systems emerged in the 1910s and 1920s, driven by public safety needs and vacuum-tube technology. In 1921, the Detroit Police Department installed the first radio receivers in patrol cars, enabling one-way dispatch from headquarters using vacuum tubes for amplification, which dramatically improved response times to emergencies.[2] In 1924, Bell Laboratories demonstrated the first two-way, voice-based radio telephone system installed in a vehicle.[2] The Detroit system expanded in 1928 with regular one-way broadcasts on approximately 278-meter wavelengths (1080 kHz), setting a model for law enforcement adoption.[2] Two-way police radio systems were introduced in the early 1930s, with the Bayonne Police Department implementing the first such system in the United States in 1933.[16] These innovations relied on amplitude modulation (AM) and addressed urban coordination challenges. Key inventors advanced portable designs in the 1930s amid growing demand for field communications. Canadian engineer Donald Hings developed the first lightweight, two-way packset radio in 1937 while working for a mining company in British Columbia, creating a backpack-mounted device with a range of several miles for use by bush pilots and prospectors.[17] Independently, American inventor Alfred J. Gross patented a handheld UHF two-way radio in 1938, often credited as the earliest walkie-talkie prototype, which featured a compact transceiver for personal use.[18] These contributions emphasized portability and reliability in rugged environments, influencing military applications. World War II accelerated widespread adoption through military necessities. In 1940, the Galvin Manufacturing Corporation (later Motorola) produced the SCR-536 "handie-talkie," the first portable handheld two-way AM radio, weighing about five pounds and offering a range of up to two miles; over 100,000 units were deployed for infantry coordination in both European and Pacific theaters.[19] This device, alongside the backpack-mounted SCR-300 FM radio introduced in 1943, transformed tactical communications by enabling real-time voice exchange without fixed wires.[20] Postwar civilian applications expanded with regulatory support. In the 1940s, the Federal Communications Commission (FCC) allocated dedicated frequencies for public safety, notably increasing police radio channels above 25 MHz from 29 to 132 in 1946 to accommodate growing two-way systems.[21] This facilitated the shift to commercial use, exemplified by Motorola's release of the first civilian walkie-talkie models in 1949, adapting wartime designs for industries like construction and security.[2]Modern Evolution
In the 1950s and 1960s, two-way radio technology transitioned from vacuum tube-based designs to solid-state electronics, primarily using transistors, which significantly enhanced portability and reliability by reducing size, weight, and power consumption.[22] This shift enabled the development of compact handheld units suitable for mobile and field use, moving away from bulky vehicle-mounted systems. Concurrently, trunked radio systems emerged to address spectrum efficiency in high-demand environments; General Electric prototyped early trunked concepts in the late 1970s, with the FCC issuing the first operational licenses in 1979, allowing dynamic channel allocation for multiple users.[23] The 1990s marked the onset of the digital era in two-way radios, driven by the need for improved security, capacity, and data integration in professional applications. The TETRA (Terrestrial Trunked Radio) standard, ratified by the European Telecommunications Standards Institute (ETSI) in 1995, became a cornerstone for public safety communications, offering encrypted voice, short data services, and group calling optimized for emergency responders across Europe and beyond. Following this, the Digital Mobile Radio (DMR) standard, also developed by ETSI and finalized in 2005, targeted commercial and industrial sectors with its tiered architecture supporting low-cost, interoperable digital voice and basic data transmission in non-public networks.[24] From the 2000s to the 2020s, two-way radios increasingly integrated with cellular networks and advanced computing, expanding beyond traditional land mobile radio (LMR) limitations. Push-to-talk over cellular (PTToC), leveraging LTE infrastructure, gained traction in the 2010s, enabling nationwide coverage and multimedia features like location sharing without dedicated radio frequencies.[25] Parallel to this, software-defined radios (SDRs) rose in prominence, allowing programmable modulation and protocols via software updates, which improved adaptability for public safety and military uses starting around 2001 with FCC regulatory support.[26] [27] Recent trends through 2025 emphasize enhanced user experience and efficiency, incorporating artificial intelligence for noise cancellation to filter environmental interference in real-time, as seen in devices from manufacturers like Motorola and Hytera.[28] Broadband capabilities over LTE-based systems have further evolved, supporting high-speed data alongside voice for applications like video streaming in critical operations.[29] Sustainability efforts in manufacturing have also intensified, with producers adopting recyclable materials, energy-efficient batteries, and longer device lifecycles to minimize environmental impact.[30] Regulatory developments post-9/11 profoundly shaped modern two-way radio evolution, prioritizing emergency interoperability. The U.S. Department of Homeland Security launched the SAFECOM program in 2002 to address communication failures exposed during the attacks, fostering national standards for spectrum sharing and equipment compatibility.[31] The FCC and ITU followed with updates, including enhanced 700/800 MHz band allocations and guidelines for multi-agency coordination, ensuring seamless integration across federal, state, and local responders.[32]System Types
Conventional Systems
Conventional two-way radio systems employ a straightforward architecture where each user group is assigned dedicated radio channels or frequencies, independent of other groups, allowing direct communication without reliance on a central controller for resource allocation. These systems typically consist of portable handheld radios, mobile radios installed in vehicles, base stations for dispatch operations, and optional repeaters to extend coverage by retransmitting signals on a paired frequency. Base stations coordinate communications among multiple mobile units within the group, operating on fixed frequencies in the VHF (30-174 MHz) or UHF (400-512 MHz) bands allocated for land mobile radio services.[33][34][35][36] In operation, users manually select pre-assigned frequencies on their radios to initiate communication, transmitting and receiving on a first-come, first-served basis without automated channel monitoring beyond basic busy detection. To enable subchannel separation and reduce interference on shared frequencies, systems often incorporate Continuous Tone-Coded Squelch System (CTCSS) for analog signals or Digital Coded Squelch (DCS) for digital variants, which use low-frequency tones or codes to filter transmissions to authorized receivers only. This setup supports simplex mode for direct unit-to-unit links or duplex via repeaters, with users listening for channel availability before keying the microphone to transmit voice or low-speed data.[33][35][37] The primary advantages of conventional systems include low latency due to direct channel access without processing delays from a central controller, straightforward configuration that requires minimal technical expertise, and cost-effectiveness for deployments with limited user numbers, as no complex infrastructure like trunking controllers is needed. These systems facilitate interoperability among radios from different manufacturers when programmed to the same frequencies and tones, enhancing reliability in mixed environments.[33][34] Conventional systems are well-suited for use cases involving small teams or low-traffic scenarios, such as coordination among security personnel at events, operations in rural areas with sparse populations, or internal communications for small businesses like construction sites or retail outlets where coverage needs are localized.[34][35] However, limitations arise in high-use environments, where channel congestion can lead to access delays as users must wait for the frequency to clear, potentially disrupting urgent communications. Manual frequency management is required to avoid interference, and without dynamic allocation, spectrum efficiency is lower, making these systems less scalable for large or busy networks. Additionally, they are susceptible to eavesdropping on unencrypted channels and atmospheric interference affecting range.[33][35]Trunked Systems
Trunked radio systems represent an advanced form of two-way radio networking designed for high-traffic environments, where channels are dynamically allocated from a shared pool to multiple user groups, enhancing spectral efficiency over fixed-channel alternatives.[38] The core architecture features a central controller that manages channel assignments, typically using a dedicated control channel for request handling and coordination, while voice or data communications occur on working channels.[39] This setup operates like a packet-switched network, with user radios transmitting short data packets to the control channel to initiate calls, prompting the controller to assign an available channel from the pool.[39] In operation, group communications are facilitated through unique talkgroup identifiers, allowing radios to request channels transparently without manual selection.[38] When a user presses the push-to-talk button, the radio sends a request via the control channel; if a channel is available, the system grants access with an audible confirmation, and all group members switch to that channel for the duration of the transmission.[40] During busy periods, calls are queued automatically, with priority levels enabling emergency or high-priority requests to preempt ongoing transmissions, and seamless handoffs ensure continuity if a channel becomes unavailable.[39] Key standards for trunked systems emerged in the late 20th century to promote interoperability and adoption. The Enhanced Digital Access Communications System (EDACS), developed by General Electric in the 1980s, uses a control channel for digital signaling in VHF, UHF, and 800/900 MHz bands, supporting hierarchical fleet and subfleet organization for group calls.[41] In Europe, MPT-1327, published in 1988 by the British Radiocommunications Agency, defines an analog trunking protocol with 1200 bps data on the control channel, enabling multi-site networks for private mobile radio.[42][43] Another significant standard is TETRA (Terrestrial Trunked Radio), developed by ETSI in the 1990s as a digital trunked system for professional mobile radio, widely used for public safety and critical communications in Europe and beyond. For public safety in the U.S., Project 25 (P25), standardized in the 1990s by the Association of Public-Safety Communications Officials (APCO), incorporates trunking in its Phase I and II implementations, using FDMA and TDMA for digital voice and data with wide-area network support.[40][44] Advantages of trunked systems include significantly higher capacity through dynamic allocation, for example supporting up to 5 times more users per channel in some digital implementations compared to conventional analog systems, which is crucial for large organizations like public safety agencies.[45] Additional features such as priority access for emergencies, roaming across sites, and dynamic regrouping enhance operational flexibility and reliability in demanding scenarios.[40] However, these systems introduce drawbacks, including greater complexity in setup and maintenance due to the central controller and networked infrastructure, making them more vulnerable to single points of failure if the controller malfunctions.[39] Dependency on continuous infrastructure also raises costs and requires specialized equipment, potentially leading to busy signals or degraded performance during peak overloads.[38]Technology Variants
Analog Systems
Analog two-way radio systems utilize continuous waveforms to transmit voice signals, primarily through frequency modulation (FM), which varies the carrier wave's frequency in proportion to the audio input, making it the dominant method for land mobile communications due to its resistance to amplitude-based noise compared to amplitude modulation (AM).[46] AM, which modulates the carrier's amplitude, is less common in modern VHF and UHF two-way radios but persists in certain applications like aviation or older CB systems.[46] For narrowband operations mandated by the FCC, FM typically employs a deviation of ±2.5 kHz to fit within 12.5 kHz channels, ensuring efficient spectrum use while maintaining voice intelligibility.[47] These analog signals are inherently susceptible to radio frequency interference and noise, which degrade audio quality gradually as distance from the transmitter increases, often resulting in static or distortion before complete loss.[46] Decoding is straightforward, requiring minimal processing as the receiver directly demodulates the continuous waveform to recover the original audio. To mitigate constant background noise, analog systems incorporate squelch circuits that mute the receiver's audio output unless a valid signal exceeds a preset threshold, typically based on carrier presence or signal strength.[46] Legacy standards for analog FM operate in VHF (150-174 MHz) and UHF (450-512 MHz) bands under FCC Part 90 rules, supporting simplex or repeater configurations for public safety and industrial use.[46] Selective calling is enabled by Continuous Tone-Coded Squelch System (CTCSS), which superimposes low-frequency sub-audible tones (67-254 Hz) on the transmitted signal; receivers only unsquelch for matching tones, reducing interference on shared channels.[48] These standards ensure interoperability in VHF/UHF interoperability channels.[48] Analog systems offer advantages in low-cost hardware implementation, as they require simpler circuitry without digital encoding processors, making them accessible for basic deployments.[49] They also provide wide compatibility with older equipment, allowing seamless integration in mixed fleets without upgrades.[49] Although the FCC's narrowbanding mandate, effective January 1, 2013, required all VHF and UHF land mobile systems below 512 MHz to transition to 12.5 kHz or narrower channels for spectrum efficiency, analog FM remains permissible if compliant.[50] This has accelerated a shift toward digital systems for enhanced features, yet analog persists in hobbyist, amateur, and entry-level commercial applications where simplicity suffices.[50]Digital Systems
Digital two-way radio systems process signals as discrete binary data, enabling advanced encoding and modulation techniques that enhance reliability and efficiency compared to continuous analog waveforms. Speech is digitized using vocoders such as the Advanced Multi-Band Excitation (AMBE+2) codec, developed by Digital Voice Systems, Inc., which compresses audio to bit rates ranging from 2.4 to 7.2 kbps while maintaining intelligible voice quality. This encoding allows for efficient transmission over narrow bandwidths, with modulation schemes like π/4-DQPSK or QPSK converting the digital stream into radio frequency carriers. Multiple access methods, including Time Division Multiple Access (TDMA) and Frequency Division Multiple Access (FDMA), support concurrent users; TDMA divides a single channel into time slots for two simultaneous conversations, while FDMA allocates separate frequencies.[51][52] Key standards define interoperability and performance for digital systems. The Digital Mobile Radio (DMR) standard, specified by ETSI in TS 102 361, includes Tier II for conventional operations and Tier III for trunked systems, both employing two-slot TDMA within 12.5 kHz channels to achieve spectrum efficiency equivalent to 6.25 kHz per slot.[53] Project 25 (P25) Phase 2, developed by the Telecommunications Industry Association (TIA) for public safety, uses a half-rate vocoder and two-slot TDMA in 12.5 kHz channels, doubling voice capacity over Phase 1 FDMA while supporting mixed-mode operations.[54] The Terrestrial Trunked Radio (TETRA) standard, also from ETSI (EN 300 392), is a TDMA-based system with four time slots per 25 kHz carrier, optimized for European professional mobile radio with robust air-interface encryption and group calling.[55] These systems incorporate forward error correction (FEC) codes, such as convolutional or Reed-Solomon, to detect and repair transmission errors caused by interference or fading, ensuring clearer audio at range limits.[56] Data integration enables text messaging, GPS location sharing, and telemetry, with protocols like those in DMR supporting short data services up to 140 characters or periodic position updates.[57] Over-the-air rekeying (OTAR) facilitates secure encryption key distribution without physical access, using encrypted channels to update keys in P25 and compatible DMR/TETRA implementations, enhancing operational security.[58] Digital systems offer superior spectrum efficiency through TDMA, allowing two users per 12.5 kHz channel versus one in analog, and provide noise immunity via FEC and digital filtering, reducing static and distortion even in marginal coverage areas.[59] They support multimedia applications, including integrated data for location tracking and status updates, which extend beyond voice-only communications. Implementation often leverages software-defined radios (SDRs), where programmable firmware enables over-the-air protocol updates and multi-standard compatibility without hardware changes.[26] For instance, SDR architectures in P25 systems allow seamless transitions between FDMA and TDMA modes, adapting to evolving regulatory requirements like 6.25 kHz equivalence.[54]Frequency and Propagation
Allocated Bands
Two-way radios, primarily operating in the land mobile radio service, utilize specific frequency bands allocated by national and international regulatory authorities to ensure interference-free communication for public safety, business, and industrial applications. These allocations are governed by the International Telecommunication Union (ITU) Radio Regulations, which divide the world into three regions and harmonize spectrum use through periodic World Radiocommunication Conferences (WRC), such as WRC-23, to facilitate global interoperability for mobile services below 1 GHz.[60][61][62] In the Very High Frequency (VHF) range, the primary allocation for land mobile two-way radios spans 136-174 MHz, with sub-bands designated for various uses. In the United States, under Federal Communications Commission (FCC) rules, the 150-174 MHz segment supports public safety operations, while 151-154 MHz is allocated for business and industrial communications within Part 90 of the FCC regulations. Internationally, ITU Region 2 (Americas) aligns closely with these U.S. allocations, whereas Region 1 (Europe, Africa, Middle East) typically assigns 149-156 MHz and 158-162 MHz for similar land mobile purposes, with variations managed by bodies like the UK's Office of Communications (Ofcom). Licensing under FCC Part 90 requires eligibility for commercial entities, frequency coordination, and compliance with power limits to prevent interference.[63][64][65][66][67] The Ultra High Frequency (UHF) band, from 400-512 MHz, provides another core allocation for two-way radios, particularly in urban environments where higher frequencies enable better penetration through obstacles. Key segments include 450-470 MHz for itinerant business use in the U.S., as per FCC allocations, and 421-430 MHz paired with 470-512 MHz for private land mobile systems. In ITU Region 1, Ofcom allocates 410-430 MHz and 450-470 MHz for business radio, with licensing options for simple site-specific or nationwide use. Region 3 (Asia-Pacific) features similar UHF harmonization, though with adjustments for local needs, as outlined in ITU tables. These bands support both conventional and trunked systems, subject to the same Part 90 licensing for commercial operations in the U.S.[68][64][65][69][67] Higher frequency allocations, such as the 700 MHz, 800 MHz, and 900 MHz bands, are predominantly used for trunked two-way radio systems to handle higher user densities. In the U.S., the FCC designates 758–775 MHz paired with 788–805 MHz for public safety narrowband and broadband services (e.g., P25 and FirstNet), 851-869 MHz (paired with 806-824 MHz) for Specialized Mobile Radio (SMR) services including public safety trunking, and 896-901 MHz paired with 935-940 MHz for industrial and business trunked operations. These bands require advanced licensing under Part 90, often involving auctions for spectrum rights. Internationally, ITU Regions 2 and 3 incorporate these allocations with footnotes for mobile-satellite coexistence, promoting harmonization via WRC outcomes.[35][70][71][72][73][74] For long-range applications, the High Frequency (HF) band of 2-30 MHz is occasionally allocated for two-way voice communications, though it is rare in standard land mobile setups due to propagation variability and is more common in maritime or amateur contexts. U.S. FCC allocations in this range, such as 2-25 MHz segments under Part 90, support limited fixed and mobile operations, with international ITU harmonization emphasizing low-power use to avoid interference.[63][66][60] Band plans for these allocations distinguish between wideband (typically 25 kHz channel spacing with 5 kHz deviation) and narrowband (12.5 kHz spacing with 2.5 kHz deviation) configurations to optimize spectrum efficiency. The FCC mandated a transition to narrowband operations in VHF (150-174 MHz) and UHF (421-512 MHz) bands by January 1, 2013, to accommodate more users without expanding spectrum. Similar narrowbanding requirements apply in the UK under Ofcom guidelines, aligning with ITU efforts at WRC conferences to standardize channel spacings globally for land mobile services.[64][75][76][61]| Band | Frequency Range (MHz) | Primary Use (U.S. FCC Example) | ITU Region Notes |
|---|---|---|---|
| VHF Low Band | 25-50 | General land mobile, rural | Region 1: Limited to 29.7-50 MHz |
| VHF High Band | 136-174 | Public safety (150-174), business (151-154) | Region 2: Aligned; Region 1: 149-170 |
| UHF | 400-512 | Business/itinerant (450-470) | Region 3: 410-470 harmonized |
| 700 MHz | 758-775 / 788-805 | Public safety narrowband and broadband | Aligned in Region 2 with public safety priority |
| 800 MHz | 806-824 / 851-869 | Trunked SMR, public safety | Global mobile with satellite footnotes |
| 900 MHz | 896-901 / 935-940 | Industrial trunked | Region 2 primary for SMR |
| HF | 2-30 | Long-range voice (rare) | Worldwide, low-power mobile |