NXP LPC
The LPC (Low Pin Count) is a family of 32-bit microcontroller integrated circuits developed by NXP Semiconductors, featuring ARM Cortex-M processor cores and targeted at embedded applications from low-power sensors to high-performance industrial systems.[1] Originally introduced by Philips Semiconductors in the early 2000s as one of the first integrated flash-based ARM microcontrollers, the LPC line transitioned to NXP following the 2006 spin-off of Philips Semiconductors into an independent company.[2][3] By 2018, the portfolio had grown to over 400 devices, building on more than 11 years of innovation to support diverse markets including IoT, automotive, and consumer electronics.[1] Key defining characteristics include scalable performance with clock speeds up to 204 MHz, memory options reaching 1 MB of flash and 282 KB of SRAM, and integrated peripherals such as USB, CAN, Ethernet, and LCD controllers for enhanced connectivity and efficiency.[1] The LPC family encompasses multiple series tailored to specific needs, including the entry-level LPC800 with Cortex-M0+ cores for cost-sensitive designs, the LPC1100 for ultra-low power applications, the performance-oriented LPC4000 and LPC4300 series with Cortex-M4 and dual-core options, and advanced lines like LPC54000 and LPC5500 for IoT and secure processing using Cortex-M33 cores.[1][4] Supported by NXP's MCUXpresso software ecosystem and a 10-year product longevity program, the LPC microcontrollers emphasize ease of development, reliability, and long-term availability for engineers.[1]Overview
The LPC family originated with Philips Semiconductors in the early 2000s, with the LPC2000 series introduced in 2004 as one of the first integrated flash-based ARM microcontrollers using the ARM7TDMI core.[2] In 2006, Philips Semiconductors was spun off to form NXP Semiconductors, which continued expanding the line.[3] Key milestones include the 2010 launch of the dual-core LPC4300 series, the 2011 introduction of the Cortex-M4-based LPC4000 series, and the 2012 debut of the low-cost LPC800 series with Cortex-M0+ cores.[1] The portfolio grew further with the LPC54000 series in 2017 for high-performance IoT applications and the LPC5500 series in 2018, featuring secure Cortex-M33 cores.[1] [5] By 2018, the family encompassed over 400 devices, supported by a 10-year longevity program.[1]LPC5500 Series
Architecture and Core
The LPC5500 series utilizes the Arm Cortex-M33 core, operating at up to 150 MHz, based on the Armv8-M architecture with integrated TrustZone for secure processing. Some variants, such as the LPC55S6x family, feature an optional second Cortex-M33 core for enhanced performance and power efficiency in multi-tasking scenarios. The core includes a single-precision floating-point unit (FPU), digital signal processing (DSP) extensions, and a memory protection unit (MPU) for reliable operation in embedded systems. In high-end models like the LPC55S6x, a dedicated DSP accelerator (PowerQuad) provides up to 10x improvement in signal processing tasks.[6][7] Memory options scale across families, with up to 640 KB of on-chip flash (supporting PRINCE encryption for secure code execution) and 320 KB of SRAM, including dedicated banks for code, system, and USB operations. Error correction and secure partitioning are enabled via TrustZone and MPU, allowing flexible allocation while preventing unauthorized access. The system employs a multi-layer AHB matrix bus for high-bandwidth concurrent access by the core(s) and peripherals, supported by two DMA controllers offering up to 32 channels for efficient data transfers and offloading CPU tasks.[7][6] Clocking is managed through independent PLLs (PLL0 and PLL1), sourcing from an internal free-running oscillator (FRO) at 96 MHz (or 12 MHz/1 MHz variants) or external crystals up to 25 MHz, enabling core frequencies up to 150 MHz. Low-power modes include sleep (with RTC active at ~1 µA), deep-sleep (~100 nA), power-down, and deep power-down (~475 nA without RTC), facilitated by an integrated power management unit (PMU) with DC-DC converter support for single-supply operation at 1.8-3.6 V. Wake-up sources such as the 32 kHz RTC ensure always-on functionality for battery-powered applications.[7]Features and Applications
The LPC5500 series integrates peripherals optimized for secure, connected embedded systems. Connectivity includes full-speed (FS) and high-speed (HS) USB 2.0 interfaces with on-chip PHY (crystal-less FS option), supporting host/device modes up to 480 Mbps; up to nine FlexComm interfaces configurable as UART, SPI (up to 50 MHz HS SPI), I²C, or I²S; and SDIO for dual-card support. Analog features comprise a 16-bit ADC (up to 2 MSPS, 10 channels) with threshold comparison, alongside comparators and DACs in select models. Timers include five 32-bit counter/timers (CTIMER), a state-configurable timer/PWM (SCTimer), RTC, watchdog (WWDT), and multi-rate timer (MRT) for precise control. Security is a core strength, with hardware accelerators for AES-256, SHA-2, PRINCE, true random number generator (TRNG), and SRAM physically unclonable function (PUF) for root-of-trust generation, enabling secure boot, debug authentication, and real-time decryption.[7][6] The series encompasses scalable families: the baseline LPC551x/S1x with up to 256 KB flash and 96 KB SRAM for cost-sensitive designs; LPC552x/S2x with enhanced connectivity; and performance-oriented LPC55S6x with dual cores, up to 640 KB flash/320 KB SRAM, and DSP for compute-intensive tasks. Automotive-grade variants in some families meet AEC-Q100 standards. Packages range from compact VFBGA59 (5x5 mm) to HLQFP100 (14x14 mm), including HTQFP64 and VFBGA98 for space-constrained integrations.[4][6] Applications target secure IoT gateways, industrial control, consumer electronics, building automation, diagnostic equipment, and machine learning edge nodes, leveraging the series' balance of performance, security, and low power. The Cortex-M33 delivers up to 1.5 DMIPS/MHz, supporting responsive real-time operation while enabling energy-efficient designs for always-connected devices.[7][6]LPC54000 Series
Architecture and Core
The LPC54000 Series utilizes an Arm Cortex-M4 main processor operating at up to 180 MHz, with an optional Arm Cortex-M0+ coprocessor in select variants to support asynchronous operation and independent task execution via a multi-layer AHB matrix interconnect. The Cortex-M4 core incorporates a single-precision floating-point unit (FPU) compliant with IEEE 754-2008, enabling efficient handling of floating-point computations for performance-critical applications, while the M0+ core manages lower-power, real-time tasks at comparable frequencies in dual-core variants like select LPC541xx models. This setup allows the M4 core to be powered down while the M0+ maintains essential functions, optimizing energy use in tiered processing scenarios.[8][9][10] The memory system provides scalable storage with up to 512 KB of on-chip flash in standard models or up to 4 MB of integrated Quad SPI serial flash in variants like the LPC54S018, and 360 KB of SRAM configured as 160 KB contiguous main SRAM plus 192 KB on instruction and data buses, plus an 8 KB USB-dedicated bank. Error correction code (ECC) is supported on SRAM for enhanced data integrity, and memory allocation is flexible between cores where applicable, managed through the Cortex-M4's Memory Protection Unit (MPU) to enable secure partitioning and efficient sharing without contention. This configuration supports high-throughput access via separate bus masters for each core, with individual power domains for granular control.[11][12][13] The system bus employs a multi-layer AHB matrix with an integrated crossbar switch to facilitate concurrent access by multiple masters, delivering high bandwidth for core-to-memory and core-to-peripheral transfers. Dual DMA controllers, providing up to 32 channels total, enable efficient inter-core communication through memory-to-memory transfers and peripheral offloading, reducing CPU overhead in data-intensive operations.[11][9][14] Clocking flexibility is achieved via independent phase-locked loops (PLLs), including a system PLL (PLL0) that generates core clocks up to 180 MHz from sources like the 12/48/96 MHz free-running oscillator (FRO) or external crystals, with separate configurations possible for each core in dual-core models. Low-power states include deep-sleep mode at ~54 µA (SRAM retained, 25°C) and deep power-down at ~1 µA (RTC enabled, 25°C), supporting always-on functionality through wake-up sources like the 32 kHz RTC. The integrated power management unit (PMU) oversees these modes, with programmable scaling of core and peripheral voltages to minimize consumption during idle or reduced-frequency operation, making the architecture suitable for battery-powered, always-on IoT devices.[11][15][10]Features and Applications
The LPC54000 series microcontrollers integrate a range of peripherals tailored for embedded applications requiring efficient processing and interface capabilities. Key among these is the LCD controller, which supports high-resolution graphics on STN and TFT displays up to 1024x768 pixels in 24-bit color depth, augmented by SmartDMA for offloading data transfers to LCD/TFT panels and enabling hardware cursor functionality.[11] Advanced audio features include the Inter-IC Sound (I²S) interface for stereo or mono audio with time-division multiplexing (TDM) support, SPDIF for digital audio transmission, and a digital microphone (DMIC) subsystem for PDM microphone inputs.[11] Connectivity options encompass a Quad SPI Flash Interface (SPIFI) enabling execute-in-place (XIP) operation from external flash at speeds up to 52 MB/s, as well as a 10/100 Mbps Ethernet MAC with DMA and Audio Video Bridging (AVB) support for networked applications.[11] Analog peripherals feature two 12-bit ADCs, one offering up to 5 MSamples/sec across 12 channels with threshold comparison and integrated temperature sensor, suitable for precise signal acquisition.[11] The series comprises several model variants optimized for different performance and environmental needs. The LPC541xx models include single- and dual-core configurations with up to 512 KB on-chip flash and 192 KB SRAM (including 160 KB main and 32 KB on instruction/data buses), providing cost-effective options for general-purpose use.[9] The flagship LPC546xx models feature a single-core architecture with up to 512 KB flash and 200 KB SRAM (160 KB main plus additional banks), supporting partitioned processing for complex tasks.[16] For automotive applications, the LPC54S0xx variants are qualified to AEC-Q100 standards with ASIL-B functional safety compliance, incorporating enhanced security features like AES-256 and SHA acceleration while featuring up to 360 KB SRAM, with flash via external SPIFI or integrated up to 4 MB QSPI serial flash in select configurations.[11] These microcontrollers are available in compact packages ranging from 100 to 208 pins, including TFBGA (100, 144, 180 pins) and LQFP (100, 208 pins) types, which facilitate integration into space-constrained designs such as portable devices and control modules.[11] Primary applications leverage the series' real-time capabilities and peripheral richness for human-machine interfaces (HMIs) in industrial panels, multimedia devices like audio players and displays, motor control systems in appliances, and connected gateways for IoT edge processing.[13] The hardware acceleration provided by SmartDMA and cryptographic engines enhances efficiency in graphics rendering and signal processing tasks.[11] Performance is characterized by up to 1.25 DMIPS/MHz on the Cortex-M4 core, enabling responsive operation at clock speeds to 180 MHz while maintaining low power consumption for battery-operated or always-on scenarios.[11]LPC4000 Series
LPC43xx
The LPC43xx series represents a pivotal advancement in the LPC4000 family, introducing a dual-core architecture that combines an ARM Cortex-M4 processor with a Cortex-M0 coprocessor to enable efficient multitasking in embedded systems. This design allows the Cortex-M4, operating at up to 204 MHz with a floating-point unit (FPU), to manage computationally intensive tasks such as signal processing and control algorithms, while the Cortex-M0, also capable of up to 204 MHz, handles real-time input/output operations and peripheral management to ensure low-latency responses.[17] The series supports inter-core communication through shared SRAM acting as a mailbox mechanism and an event router for interrupt-based signaling, facilitating seamless code partitioning where complex application logic runs on the M4 and deterministic tasks on the M0. Memory resources in the LPC43xx are optimized for dual-core operation, featuring up to 1 MB of dual-bank flash memory that permits simultaneous read/write operations across banks, alongside up to 264 kB of SRAM distributed in multiple power-domain blocks for flexible allocation between cores. An external memory controller (EMC) further extends capabilities by interfacing with SDRAM, NAND flash, NOR flash, and static RAM, supporting bus widths up to 32 bits depending on the package.[17] This configuration bridges legacy systems requiring robust I/O handling with modern demands for higher performance, as evidenced by the series' integration of connectivity features like a high-speed USB 2.0 interface (480 Mbps) supporting host, device, and OTG modes with DMA, a 10/100 Mbps Ethernet MAC compliant with IEEE 1588 for precise timing, and up to two CAN 2.0B controllers for automotive and industrial networking.[17][18] Clocking in the LPC43xx is managed by an advanced phase-locked loop (PLL) system, including PLL0 for USB synchronization (14 kHz to 25 MHz input), PLL1 for main system clocks (up to 320 MHz internally before division to 204 MHz), and an audio-dedicated PLL, all fed by a 1-25 MHz crystal oscillator or a 12 MHz internal RC oscillator. This multi-domain clocking architecture allows independent frequency scaling for peripherals and cores, enhancing power efficiency in applications like motor control, industrial automation, and consumer electronics.[17] Introduced in 2011, the LPC43xx targeted scenarios needing partitioned code execution to optimize resource use without compromising real-time performance.[18]LPC40xx
The LPC40xx family consists of single-core Arm Cortex-M4-based microcontrollers developed by NXP Semiconductors for embedded applications emphasizing high integration, signal processing capabilities, and efficient power usage. These devices target general-purpose control, human-machine interfaces, and industrial automation, offering a balance of performance and peripheral support without the complexity of dual-core architectures. Introduced in 2012, the LPC40xx series provides scalable options for developers, with flash memory ranging from 64 KB to 512 KB and SRAM from 16 KB to 96 KB, enabling flexible code and data storage for real-time systems.[19][20] At the heart of the LPC40xx is a 32-bit Arm Cortex-M4 processor core operating at up to 120 MHz, incorporating digital signal processing instructions and, on select models, a single-precision floating-point unit (FPU) compliant with IEEE 754-2008 for accelerated mathematical operations in applications like motor control and sensor processing. Memory configuration supports in-system programming (ISP) and in-application programming (IAP) through UART0 or SPIFI interfaces, allowing field updates without specialized hardware. The family distinguishes itself through integrated peripherals tailored for display and analog interfacing, including a motor control PWM unit capable of generating precise waveforms for three-phase motor drives and a 12-bit successive approximation ADC with 8 multiplexed channels, achieving conversion rates up to 400 kSamples/s at full resolution. Higher-end variants also feature an LCD controller supporting STN and TFT panels up to 1024 × 768 resolution with 24-bit color depth.[19] Power efficiency is achieved via dynamic scaling across multiple modes—active, sleep, deep-sleep, power-down, and deep power-down—operating on a single 3.3 V supply (2.4 V to 3.6 V range). Typical active-mode current draw is approximately 56 mA at 120 MHz with peripherals enabled, equating to about 467 µA/MHz, while power-down mode reduces consumption to 280–600 µA, supporting battery-powered or energy-constrained designs. The LPC407x variants serve general-purpose needs with USB device/host support and up to 512 KB flash but lack Ethernet and LCD on lower models, whereas the LPC408x extends functionality with an integrated Ethernet MAC for networked applications, external memory controller (EMC), and FPU across the lineup, making it suitable for connectivity-focused prototyping and development.[19]LPC3000 Series
LPC32xx
The LPC32xx series, specifically the LPC32x0 family, represents NXP Semiconductors' early ARM9-based microcontrollers designed for embedded applications requiring a balance of high performance and low power consumption. These devices feature the ARM926EJ-S core, a 16/32-bit RISC processor with a 5-stage pipeline, Harvard architecture, Memory Management Unit (MMU), and DSP extensions for enhanced signal processing tasks. The core supports operation at frequencies up to 266 MHz, delivering approximately 220 MIPS of performance, and includes hardware-based Jazelle technology for direct execution of Java byte-code, enabling efficient Java applications without interpretation overhead. Additionally, an integrated Vector Floating Point (VFP) coprocessor accelerates floating-point computations, making it suitable for graphics and signal processing workloads.[21] Memory architecture in the LPC32xx emphasizes flexibility for multimedia and storage-intensive uses, with 32 kB of instruction cache and 32 kB of data cache to optimize core performance by reducing external memory access latency. The series provides a dedicated interface for SDR or DDR SDRAM, supporting 16- or 32-bit wide buses and capacities up to 512 Mbit (64 MB) per bank at speeds up to 133 MHz, allowing seamless integration of large dynamic memory pools. For non-volatile storage, dual NAND flash controllers—one for single-level cell (SLC) and one for multi-level cell (MLC) devices—enable direct connection to various flash sizes and configurations, with built-in error correction via Reed-Solomon encoding/decoding and DMA support to minimize CPU intervention during data transfers. On-chip SRAM ranges from 128 kB to 256 kB across variants, providing fast access for code and data.[21] Peripherals in the LPC32xx are oriented toward multimedia and connectivity, including a versatile LCD controller that drives STN or TFT panels with resolutions up to 1024 × 768 pixels, palette or direct color modes (up to 24-bit), and dedicated DMA for efficient frame buffer handling, ideal for display-intensive applications. A USB 2.0 full-speed OTG interface supports host, device, or OTG modes with an integrated OHCI-compliant host controller and dedicated PLL for 48 MHz operation, facilitating peripherals like storage devices or human-interface inputs. Other notable integrations include a 10/100 Ethernet MAC with DMA and hardware acceleration for checksums and frame filtering on select models (LPC3240/3250), multiple I²C, SPI, and UART interfaces, as well as a 10-bit ADC with touchscreen support. These features position the LPC32xx for consumer electronics, industrial controls, and medical devices requiring graphical interfaces and networked connectivity.[21][22] Clocking and power management employ a multi-PLL system, including a 397x PLL for precise RTC derivation, a USB PLL for stable 48 MHz, and an HCLK PLL for scalable peripheral clocks, allowing independent domain control to optimize power in dynamic workloads. The core operates at a supply voltage of 0.9 V to 1.39 V (typically 1.35 V for full speed), while I/O pads support 1.8 V, 3.0 V, or 3.3 V levels for broad compatibility, and EMC interfaces (for memory) range from 1.7 V to 3.6 V. Released around 2008, the LPC32xx series has become a legacy platform but remains relevant in legacy systems for its robust multimedia capabilities and Linux support via provided board support packages. As of 2025, the series is discontinued with limited availability under NXP's product longevity program.[21][22][23]LPC31xx
The LPC31xx series, part of NXP's LPC3000 family, consists of low-cost, power-efficient ARM9-based microcontrollers optimized for applications needing high-speed USB connectivity, external memory support, and battery-powered operation. Introduced in 2009 as a more energy-efficient alternative to the higher-performance LPC32xx series, these devices target industrial, consumer, and portable systems where compact design and low power are critical.[24] At the heart of the LPC31xx is the ARM926EJ-S processor core, operating at clock speeds of 180 MHz in base models like the LPC3130/3131 and up to 270 MHz in variants such as the LPC3141/3143, with support for dynamic voltage and frequency scaling to balance performance and energy use. The core includes a Memory Management Unit (MMU) for multitasking, along with separate 16 kB instruction and 16 kB data caches featuring 8-word line lengths to enhance execution efficiency from external memory.[25][26] Memory architecture emphasizes flexibility for storage-intensive tasks, with up to 192 kB of on-chip SRAM and a multi-port memory controller (MPMC) supporting up to 128 MB of external SDRAM or SRAM via an 8/16-bit interface. A dedicated NAND flash controller handles 8/16-bit devices with hardware 8-bit ECC for reliable data storage, commonly used in industrial firmware applications.[25][26] Key integrated peripherals include a secure digital host controller compatible with SD/MMC, SDHC, SDIO, and CE-ATA cards for removable storage, alongside two I²S interfaces for audio codec connectivity in portable devices. A battery-backed real-time clock (RTC) ensures timekeeping in low-power states, supporting applications like data logging.[25][27] Power management is a standout feature, with a 1.2 V core supply enabling ultra-low consumption: typical standby mode draws 1.75 mW, while deep sleep can reach as low as 50 µA, making the LPC31xx suitable for battery-operated industrial controls and consumer gadgets. Variants like the LPC313x focus on general industrial use, the LPC314x adds AES decryption and one-time programmable (OTP) memory for security, and the LPC315x incorporates a stereo audio codec with headphone amplifier for multimedia peripherals. As of 2025, the series is discontinued with limited availability under NXP's product longevity program.[25][27][23]LPC2000 Series
The LPC2000 series, introduced in the mid-2000s, is now considered legacy by NXP as of 2025, with varying availability across devices.[28]LPC24xx and LPC23xx
The LPC24xx and LPC23xx series represent higher-end models within the LPC2000 family of microcontrollers, designed for demanding embedded applications requiring advanced connectivity and integration. These devices are built around the ARM7TDMI-S 16-bit/32-bit RISC processor core, which operates at speeds up to 72 MHz, providing efficient performance for real-time tasks while maintaining low power consumption.[29][30] The architecture supports real-time emulation and debugging interfaces, such as EmbeddedICE, enabling seamless development for complex systems.[29] Memory configurations in the LPC23xx series typically include 128 kB to 512 kB of on-chip flash memory for program storage, paired with 16 kB to 64 kB of SRAM for data handling, including dedicated portions for peripherals like Ethernet and USB.[29] The LPC24xx series extends this with 256 kB to 512 kB flash and up to 96 kB total SRAM, incorporating additional general-purpose and DMA-accessible RAM blocks to support more intensive multitasking.[30] Both series feature In-System Programming (ISP) and In-Application Programming (IAP) capabilities for the flash, allowing field updates without specialized hardware.[29][30] Key peripherals emphasize connectivity and interface versatility. Select models in the LPC23xx series integrate a 10/100 Ethernet MAC with DMA support for networked applications, two CAN 2.0B controllers for robust industrial communication, and a full-speed USB 2.0 device controller with 4 kB of dedicated endpoint RAM.[29] Building on this, the LPC24xx adds an LCD controller capable of driving STN and TFT panels up to 1024 × 768 resolution, an external memory controller for interfacing with SDRAM or other devices, and enhanced motor control timers with up to 10 compare outputs for PWM generation in automation tasks.[30] Both series include four 32-bit timers with capture/compare functions, multiple UARTs, SSP/SPI, I²C, and I²S interfaces, along with a 10-bit ADC and DAC for analog signal processing.[29][30] Clocking is managed via an on-chip PLL that multiplies the input oscillator frequency (from 32 kHz to 25 MHz) to achieve the full 72 MHz CPU speed, with options for USB and Ethernet clocking derived from the same source.[29][30] Brown-out detection circuitry monitors supply voltage with configurable thresholds—typically 2.95 V for interrupt and 2.65 V for reset—ensuring reliable operation in power-unstable environments.[30] Introduced in 2006–2007, these series gained popularity in USB-intensive applications such as printers, point-of-sale terminals, and industrial controllers due to their balanced integration of host/device USB functionality with networking capabilities.[31][32]LPC21xx and LPC22xx
The LPC21xx and LPC22xx series represent early members of NXP's LPC2000 family of ARM-based microcontrollers, designed for cost-effective embedded applications requiring moderate processing power. These devices are built around the ARM7TDMI-S core, a 16/32-bit RISC processor operating at up to 60 MHz for flash-based variants or 75 MHz for flashless models.[33] The LPC21xx subfamily targets simpler designs with on-chip flash memory ranging from 32 kB to 256 kB and SRAM from 8 kB to 32 kB, while the LPC22xx extends this with support for external memory interfaces, offering up to 256 kB flash or flashless configurations paired with 16 kB to 64 kB SRAM.[33] Both support In-System Programming (ISP) and In-Application Programming (IAP) via a built-in bootloader, enabling field updates without specialized hardware.[34] Key integrated peripherals emphasize versatile I/O for control tasks, including two UARTs for serial communication, one I²C interface operating up to 400 kbit/s in master/slave modes, and two SPI ports for 8- to 16-bit data transfers.[33] A 10-bit ADC with up to 8 channels (depending on package) handles analog inputs, complemented by a PWM unit providing six outputs suitable for motor control and timing applications.[34] These features make the series ideal for foundational embedded systems without needing external components for basic interfacing. Power management is optimized for low-energy operation at 3.3 V nominal supply (3.0 V to 3.6 V for I/O, 1.8 V core), with active-mode consumption around 40 mA at 60 MHz—equating to less than 1 mA/MHz—and power-down mode drawing under 10 µA at room temperature.[34] Reliability is enhanced by an integrated watchdog timer for system monitoring and brown-out detection to prevent operation during voltage dips.[33] Introduced between 2004 and 2005, the LPC21xx and LPC22xx series gained popularity in educational settings, such as with the LPC2103-based development boards for teaching ARM architecture and peripherals, and in simple control applications like industrial sensors and consumer devices.[35][36]LPC1000 Series
LPC18xx and LPC17xx
The LPC17xx series represents NXP's high-performance ARM Cortex-M3-based microcontrollers designed for embedded applications requiring robust connectivity and processing capabilities. These devices feature a 32-bit ARM Cortex-M3 core operating at up to 100 MHz for most variants (LPC176x) or 120 MHz for the LPC1769, enabling efficient execution of complex control algorithms.[37] Memory configurations include 128 KB to 512 KB of on-chip flash and 32 KB to 64 KB of SRAM, with some models supporting an external memory bus for additional expansion.[37] Key integrated peripherals emphasize industrial and networking demands, such as two CAN 2.0B controllers for automotive and control networks, USB 2.0 OTG/full-speed host/device interfaces for connectivity, and Ethernet MAC (10/100 Mbps) on select models like the LPC1768 for networked applications.[37] Clocking is managed via a high-frequency PLL supporting up to 120 MHz from a 1-25 MHz crystal oscillator or 4 MHz internal RC, ensuring stable operation in demanding environments.[37] Introduced in 2008, the LPC17xx series targets applications like motor control, eMetering, and industrial networking.[38] These devices are included in NXP's 15-year product longevity program, ensuring availability until at least 2038.[39] Building on the LPC17xx foundation, the LPC18xx series advances performance with enhanced speed and memory for more intensive tasks such as robotics and advanced networking. The ARM Cortex-M3 core runs at up to 180 MHz, providing superior computational throughput compared to earlier models.[40] Memory options scale to 256 KB–1 MB of dual-bank flash, 64–136 KB of SRAM, and 16 KB of EEPROM, complemented by an external bus interface (EBI) supporting up to 1 GB of external memory for flexible system expansion.[40] Peripherals are optimized for high-speed integration, including 10/100 Ethernet MAC with IEEE 1588 timing support, two high-speed USB 2.0 interfaces (one OTG), two CAN 2.0B controllers, and a Quad SPI Flash Interface (SPIFI) enabling up to 52 MB/s data rates for rapid code execution from external storage.[40] Clock generation utilizes three PLLs and a 1–25 MHz crystal oscillator to achieve the 180 MHz system clock, with a 12 MHz internal RC for initialization.[40] Announced in 2010, the LPC18xx series suits high-demand control systems in industrial automation, RFID readers, and networked consumer devices.[41] These devices are included in NXP's product longevity program.[23]| Feature | LPC17xx | LPC18xx |
|---|---|---|
| Core Clock | Up to 120 MHz | Up to 180 MHz |
| Flash Memory | 128–512 KB | 256 KB–1 MB |
| SRAM | 32–64 KB | 64–136 KB |
| Key Peripherals | 2x CAN, USB OTG, Ethernet (select) | 2x CAN, 2x HS USB, Ethernet, Quad SPI |
| External Bus | Limited (select models) | EBI up to 1 GB |
| Target Applications | Motor control, eMetering | Robotics, advanced networking |