Spirometry
Spirometry is a noninvasive pulmonary function test that measures the volume and flow rate of air inhaled and exhaled during forced breathing maneuvers, providing critical insights into lung capacity and airflow dynamics.[1] It is performed using a spirometer, a device that records these metrics to assess overall respiratory health.[2] The primary purpose of spirometry is to diagnose and monitor obstructive and restrictive lung diseases, such as asthma, chronic obstructive pulmonary disease (COPD), and pulmonary fibrosis, by evaluating how effectively the lungs transfer air.[3] It is also used to assess preoperative lung function, screen for occupational lung hazards, and evaluate the response to bronchodilator therapy or disease progression over time.[2] Key measurements include forced vital capacity (FVC), the total volume of air exhaled after a maximal inhalation; forced expiratory volume in one second (FEV1), the volume exhaled in the first second of a forced exhalation; and the FEV1/FVC ratio, which helps distinguish between obstructive patterns (reduced ratio due to airflow limitation) and restrictive patterns (proportionally reduced volumes).[1] These values are compared to predicted norms based on factors like age, sex, and height, with race-neutral approaches increasingly recommended, to determine abnormality.[2][4] During the procedure, the patient sits upright and breathes through a mouthpiece connected to the spirometer, often with a nose clip to prevent air leakage, while following instructions to inhale fully and exhale as forcefully and completely as possible for at least three repeatable trials.[3] The test typically lasts 15 to 30 minutes and may include a bronchodilator challenge to detect reversible airway obstruction.[1] Although generally safe, spirometry carries minimal risks, such as temporary dizziness, coughing, or shortness of breath, and is contraindicated in cases of recent myocardial infarction, pneumothorax, or hemodynamic instability.[2] Interpretation of results guides clinical decisions, with low FEV1/FVC ratios indicating obstruction and reduced FVC suggesting restriction, ultimately aiding in personalized management of respiratory conditions.[3]Overview
Definition and Principles
Spirometry is a fundamental pulmonary function test used to measure the volume of air inhaled and exhaled by the lungs, as well as the rate of airflow during forced breathing maneuvers. It provides objective quantification of ventilatory function, enabling the assessment of respiratory health and the detection of abnormalities in lung mechanics. Specifically, spirometry evaluates dynamic aspects of lung function by recording the maximal volume of air that can be forcibly exhaled after a full inspiration, along with the speed at which this air is expelled.[5][2] The underlying principles of spirometry center on the direct measurement of air displacement or airflow to assess the mechanics of breathing. In volume-displacement spirometers, exhaled air causes a mechanical change, such as the movement of a counterbalanced bell, where the volume V is determined by the change in displacement calibrated to known units. Alternatively, in modern flow-sensing devices, volume is derived from the integration of airflow over time, expressed as V = \int Q \, dt, where Q represents the flow rate. These methods quantify the movement of air in and out of the lungs under controlled, maximal effort conditions, reflecting the integrated function of the respiratory muscles, airways, and lung parenchyma.[5][6] Physiologically, spirometry distinguishes between static lung volumes, which represent fixed capacities like total lung capacity measured without time constraints, and dynamic parameters, which capture airflow rates and volumes during rapid, forced expiration to evaluate ventilatory limitations. This focus on dynamic flows during maximal effort reveals how lung elasticity, airway resistance, and muscle strength interact to facilitate or impede gas exchange. For instance, spirometry can identify patterns indicative of obstructive lung diseases, such as airflow limitation due to narrowed airways, versus restrictive diseases, where overall lung volumes are reduced but airflow relative to volume remains preserved.[2][5]Historical Development
Spirometry originated with the invention of the first practical device in 1846 by English physician John Hutchinson, who developed a water-sealed spirometer to quantify vital capacity—the maximum volume of air that could be exhaled after full inhalation.[7] Hutchinson's motivation stemmed from assessing lung health in coal miners exposed to dust, leading him to test over 2,000 individuals and establish foundational norms for vital capacity based on age, height, and occupation.[8] This apparatus, consisting of an inverted bell in a water tank connected to a mouthpiece, marked a significant advancement over earlier rudimentary attempts to measure lung volumes, such as those using simple bags or cylinders in the early 19th century.[9] Throughout the late 19th and early 20th centuries, spirometry evolved from static volume measurements to dynamic assessments, incorporating recording mechanisms for expiratory flows. Innovations included the addition of kymographs for tracing breathing patterns, as introduced by Henry Hyde Salter in 1866, and the development of closed-circuit spirometers by Jules Tissot in 1904, which allowed for more precise gas analysis during prolonged tests.[10] A pivotal shift occurred in the mid-20th century with the introduction of forced expiratory maneuvers; in 1947, Robert Tiffeneau and J. Pinelli described the timed vital capacity, emphasizing rapid exhalation to detect airflow limitations, laying the groundwork for parameters like forced expiratory volume.[7] These advancements expanded spirometry's utility beyond vital capacity to diagnosing obstructive diseases. Post-World War II, spirometry integrated more deeply into clinical and occupational health practices, facilitated by the emergence of portable devices in the 1950s and 1960s. Devices like the Vitalograph dry-wedge spirometer, introduced in 1963, enabled bedside and field testing, particularly in monitoring workers exposed to hazards such as asbestos, where early studies in the 1950s linked reduced lung function to dust inhalation.[11] Standardization efforts culminated in the American Thoracic Society's (ATS) 1979 guidelines from the Snowbird Workshop, which defined protocols for test performance and equipment calibration.[8] These were updated in 1994 by ATS, focusing on acceptability criteria, and jointly with the European Respiratory Society (ERS) in 2005 and 2019, refining reproducibility standards and incorporating flow-volume loops for broader diagnostic accuracy.[12][13] The transition to the digital era began in the 1970s with electronic spirometers, replacing mechanical counters with transducers for real-time flow measurement and computer integration, improving precision and data storage.[14] This evolution, driven by semiconductor advancements, made spirometry more accessible for epidemiological studies, such as those tracking chronic obstructive pulmonary disease progression in the late 1970s.[7]Procedure
Spirometer Devices
Spirometer devices consist of essential components that facilitate the measurement of respiratory flow and volume. The primary elements include a mouthpiece for patient interface, flexible tubing to connect the mouthpiece to the sensing mechanism, and a transducer or flow sensor to detect airflow or volume displacement. These devices also incorporate a calibration syringe, typically a 3-liter model, to verify accuracy by simulating known air volumes during maintenance checks.[13] Spirometers are broadly classified into volume-displacement and flow-sensing types, each with distinct mechanical principles. Volume-displacement devices, such as water bell or bellows models, directly measure the volume of displaced air through mechanical movement, offering high precision but requiring larger, less mobile structures. In contrast, flow-sensing devices, including pneumotachographs or turbine-based systems, measure instantaneous airflow rates using transducers, with volume derived by electronic integration over time; these provide greater portability at the expense of needing regular calibration to maintain accuracy.[13][5] Calibration and maintenance ensure device reliability, with standards mandating daily or weekly volume verification using a 3-liter syringe to inject precise air volumes. The syringe itself must achieve an accuracy of ±0.015 L or ±0.5% of full scale, while the spirometer should register volumes within ±3% of the true value across tested flow rates. Leak tests are performed monthly, and recalibration is required if deviations exceed 6% or two standard deviations from the baseline mean.[13][5] Portability varies by design, with handheld, battery-powered flow-sensing models enabling field or point-of-care use, while stationary volume-displacement units are suited for laboratory settings due to their size and power requirements. Flow-sensing devices generally offer superior mobility compared to bulkier volume-displacement alternatives.[13] Safety features prioritize infection control, including disposable mouthpieces to minimize cross-contamination between patients and in-line bacterial/viral filters that capture bioaerosols during exhalation. These elements, such as hydrophobic filters, reduce the risk of pathogen transmission without significantly impeding airflow.[13][15] Through flow measurement and integration, spirometers derive key parameters such as forced vital capacity (FVC).[13]Step-by-Step Protocol
The step-by-step protocol for conducting a spirometry test follows standardized guidelines to ensure reproducibility and accuracy in measuring lung function. Prior to initiating the test, the technician must perform pre-test setup procedures. This includes calibrating the spirometer daily using a calibrated 3-L syringe across a range of flows from 0.5 to 12 L/s, verifying accuracy within ±2.5% of the true volume.[13] Additionally, ambient conditions such as room temperature (accurate to ±1°C) and barometric pressure must be recorded to enable body temperature and pressure saturated (BTPS) correction of the measured volumes, accounting for the difference between ambient air and the patient's exhaled gas conditions.[13] The patient is then positioned seated in an upright posture with shoulders relaxed and slightly back, chin slightly elevated, and a nose clip applied to prevent nasal air leakage.[13] The mouthpiece is placed firmly in the patient's mouth with lips sealed tightly around it to ensure an airtight connection. The technician instructs the patient to inhale maximally and completely to total lung capacity (TLC), holding the breath for a brief moment if possible, followed by an explosive, forceful exhalation through the mouthpiece.[13] The exhalation must continue for at least 6 seconds or until a plateau in volume is achieved, defined as less than 0.025 L change over the final 1 second, after which the patient performs a maximal inhalation back to TLC to complete the forced vital capacity (FVC) maneuver.[13] This sequence generates the exhalation curve from which core parameters like forced expiratory volume in 1 second (FEV1) are derived.[13] To achieve reliable results, the maneuver is repeated at least three times, allowing brief rest intervals between efforts to prevent fatigue.[13] Acceptability requires that the two largest FVC values and the two largest FEV1 values differ by no more than 0.150 L or 5% of the largest value, whichever is greater, ensuring reproducibility.[13] Up to eight trials may be performed if needed, but the session ends once these criteria are met or if the patient shows signs of exhaustion. End-test criteria emphasize full patient effort without hesitation or coughing during the initial exhalation, absence of leaks around the mouthpiece or nose clip, and generation of reproducible flow-volume loops that display a smooth, rapid peak flow followed by a consistent expiratory curve.[13] Throughout the procedure, the spirometer provides real-time graphical display of the flow-volume loop on a screen visible to the technician, allowing immediate feedback to the patient on effort quality and encouraging adjustments for suboptimal trials.[13] The selected best trial, based on the largest sum of FEV1 and FVC, is used for reporting, with all curves retained for quality assessment.[13]Patient Preparation and Safety
Patients undergoing spirometry must receive clear pre-test instructions to ensure accurate results and minimize confounding factors. These include withholding bronchodilators based on their duration of action: short-acting beta-agonists for 4-6 hours, long-acting beta-agonists for at least 24 hours, and long-acting muscarinic antagonists for 36-48 hours, with decisions guided by clinical context such as baseline testing versus bronchodilator responsiveness assessment.[13] Additionally, patients should avoid smoking, vaping, or using water pipes for at least 1 hour prior; refrain from intoxicants for 8 hours; and avoid vigorous exercise for 1 hour before the test to prevent alterations in lung function.[13] Heavy meals should be avoided 1-2 hours beforehand to reduce abdominal discomfort that could impair effort.[16] Screening for patient fitness is essential to identify potential risks before initiating the test. Operators should query for recent thoracic or abdominal surgery, hemoptysis, cerebral aneurysm, or other conditions that could exacerbate with forced maneuvers. Pneumothorax is a relative contraindication due to the risk of barotrauma from increased intrathoracic pressure.[13] Relative contraindications, such as recent acute myocardial infarction within 1 week or active tuberculosis, warrant careful consideration and possible deferral to avoid complications like increased intra-abdominal pressure or infection transmission.[13] Instructions and screening should be provided at the time of appointment scheduling and confirmed upon arrival. For optimal performance and comfort, patients are positioned in an upright seated posture using a chair with armrests, feet flat on the floor, shoulders slightly relaxed backward, and chin slightly elevated to facilitate straight alignment of the mouthpiece with the airway. A tight seal on the mouthpiece is achieved with a nose clip to prevent air leaks, and loose or tight-fitting clothing should be adjusted while retaining well-fitting dentures unless they compromise the seal. Operators provide standardized encouragement for maximal effort, such as verbal cues to "blast out as hard and fast as possible" and "keep blowing," while avoiding biased coaching that could influence reproducibility.[13] Intra-test monitoring focuses on detecting early signs of distress to ensure safety, as forced expiratory maneuvers can transiently increase intrathoracic and intra-abdominal pressures. Operators observe for symptoms including dizziness, lightheadedness, coughing, or fatigue, stopping the maneuver immediately if severe distress, such as chest pain or syncope, occurs. Real-time monitoring of volume-time and flow-volume curves allows discontinuation if forced expiratory volume in 1 second falls below 80% of the starting value, limiting maneuvers to a maximum of eight to prevent exhaustion. Adverse events are uncommon, reported in approximately 5 per 10,000 tests.[13] Post-test care involves allowing brief rest periods between maneuvers and after completion to permit recovery from any transient shortness of breath or fatigue. Patients are encouraged to report any ongoing symptoms, such as persistent chest pain or dizziness, for immediate evaluation, though most effects resolve quickly without intervention. Hydration may be recommended if coughing or dry mouth occurs, supporting overall comfort.[17]Core Parameters
Forced Vital Capacity (FVC)
Forced vital capacity (FVC) is the total volume of air that can be forcibly exhaled from full inspiration down to residual volume, representing the maximum amount of air a person can expel with maximal effort following a maximal inhalation.[13] This measurement captures the entire exhaled volume during a forced maneuver, distinguishing it from slower vital capacity tests by emphasizing speed and completeness to assess dynamic lung function.[13] FVC is measured using a spirometer that records expiratory flow over time, integrating the flow signal across the full duration of the exhalation until airflow ceases or reaches a near-zero plateau, ensuring all available air is expelled.[13] The process requires patient coaching for reproducible maximal efforts, with at least three acceptable trials where the largest FVC value is reported, and variability between trials must not exceed 0.15 L in adults.[13] Mathematically, FVC is expressed as the time integral of the flow-volume curve: \text{FVC} = \int_{0}^{t_{\text{end}}} \text{Flow}(t) \, dt where t_{\text{end}} denotes the time when expiratory flow plateaus at residual volume.[18] In clinical practice, reduced FVC values indicate restrictive lung diseases, such as idiopathic pulmonary fibrosis, where stiff or scarred lung tissue limits expansion and exhalation capacity.[19] Conversely, in obstructive diseases like chronic obstructive pulmonary disease (COPD), FVC is often normal or decreased due to air trapping and hyperinflation. FVC contributes to diagnostic ratios, such as FEV1/FVC, for differentiating these patterns. Predicted FVC values vary by demographic factors and are calculated using multi-ethnic reference equations that incorporate age, standing height, and sex; the Global Lung Function Initiative (GLI-2022) provides race-neutral equations for individuals aged 3–95 years, enabling z-score computations for accurate interpretation across diverse populations.[20][21] The GLI-2022 equations are race-neutral, removing ethnicity as a predictor for more equitable global application.Forced Expiratory Volume in 1 Second (FEV1)
Forced expiratory volume in 1 second (FEV1) is defined as the volume of air that can be forcibly exhaled during the first second of a forced vital capacity (FVC) maneuver, starting from full inspiration.[13] This parameter represents a subset of the total FVC, capturing the initial phase of expiration where airflow is maximal.[22] FEV1 is measured by integrating the airflow rate over the first second on the volume-time curve generated during spirometry, ensuring the expiration is maximal and sustained.[13] Mathematically, it is expressed as: \text{FEV}_1 = \int_{0}^{1} \text{Flow}(t) \, dt where Flow(t) is the instantaneous flow rate from the start of forced expiration to 1 second.[6] This measurement requires careful technique to avoid errors, with guidelines emphasizing back-extrapolation corrections for any delay in achieving maximal flow.[13] Physiologically, FEV1 primarily reflects the patency of large airways and the effort of respiratory muscles during early expiration, serving as a sensitive indicator of obstructive lung disease when reduced.[22] It is highly reproducible in trained subjects, with acceptable variability typically within 150 mL between maneuvers.[6] FEV1 contributes to the calculation of the FEV1/FVC ratio, which helps differentiate obstructive from restrictive patterns.[13] In clinical applications, FEV1 serves as a primary endpoint in therapeutic trials for asthma and chronic obstructive pulmonary disease (COPD), quantifying improvements in lung function over time.[23] A significant bronchodilator response is indicated by an increase in FEV1 of greater than 12% and 200 mL from baseline, signaling airway reversibility.[24]FEV1/FVC Ratio
The FEV1/FVC ratio, also known as the Tiffeneau-Pinelli index, represents the proportion of the forced vital capacity (FVC) that is exhaled within the first second of a forced expiratory maneuver, typically expressed as a percentage.[25] It is calculated as (FEV1 / FVC) × 100, where FEV1 is the forced expiratory volume in one second and FVC is the total forced vital capacity.[25] To account for variability across individuals, the lower limit of normal (LLN) for the FEV1/FVC ratio is determined using prediction equations derived from reference populations, rather than a fixed threshold.[25] These equations adjust for demographic factors such as age, sex, and height. The Global Lung Function Initiative (GLI-2022) provides race-neutral multi-ethnic reference values, recommending the use of z-scores for interpretation, calculated as: z = \frac{\text{observed} - \text{predicted}}{\text{standard deviation}} where the predicted value and standard deviation are derived from the GLI-2022 equations.[20][21] A z-score below -1.64 corresponds to the LLN (5th percentile of the healthy population distribution).[26] The GLI-2022 equations are race-neutral, removing ethnicity as a predictor for more equitable global application. Diagnostically, an FEV1/FVC ratio below the LLN indicates airflow obstruction, distinguishing obstructive lung diseases from restrictive patterns where the ratio remains normal or elevated.[25] It aids in differentiating conditions like asthma, where obstruction is often reversible with bronchodilators (showing improvement in the ratio post-treatment), from chronic obstructive pulmonary disease (COPD), characterized by largely irreversible airflow limitation persisting after bronchodilation.[27] In healthy adults, the FEV1/FVC ratio typically ranges from 70% to 85%, reflecting efficient airway patency.[25] It declines gradually with age due to natural airway remodeling and loss of elastic recoil, at an average rate of approximately 0.29% per year in aging populations.[28]Peak Expiratory Flow (PEF)
Peak expiratory flow (PEF) is defined as the highest flow rate attained during the early phase of a forced vital capacity (FVC) maneuver, typically within the first 0.1 to 0.2 seconds after the onset of exhalation from full inspiration.[5] This parameter captures the maximal speed of air expulsion and serves as an indicator of large airway function and overall expiratory drive.[29] It is particularly sensitive to variations in airway caliber and is measured in liters per minute (L/min) under body temperature and pressure saturated (BTPS) conditions.[5] The measurement of PEF is obtained from the peak point on the flow-volume loop generated during spirometry, where it reflects the instantaneous maximum flow early in expiration.[5] This value is highly effort-dependent, requiring maximal patient cooperation, vigorous exhalation, and proper technique, including a tight seal around the mouthpiece and minimal hesitation before expiration.[29] Respiratory muscle strength also plays a key role, as weakness can attenuate the peak despite normal airways.[30] Mathematically, PEF can be represented as \text{PEF} = \max\left(\text{Flow}(t)\right) \quad \text{for} \quad t \approx 0 - 0.3 \, \text{s}, where Flow(t) denotes the expiratory flow rate as a function of time from the start of the maneuver.[31] In clinical practice, PEF is primarily utilized for daily home monitoring with portable peak flow meters, enabling patients with asthma to track longitudinal changes in lung function and detect exacerbations early.[29] This approach is recommended for assessing treatment response and adherence, with variability calculated as the difference between morning and evening readings; diurnal swings greater than 20% over two weeks suggest significant asthma instability and warrant intervention. PEF values are reduced in obstructive conditions like asthma and COPD due to airflow limitation in central airways.[29] Predicted normal values are derived from reference equations incorporating height, age, sex; for instance, using GLI standards, average PEF for adult men of typical height (around 175 cm) and age (30-40 years) ranges from approximately 550 to 600 L/min.[32]Forced Expiratory Flow 25-75% (FEF25-75)
The Forced Expiratory Flow 25-75% (FEF25-75), also known as the maximal mid-expiratory flow, is defined as the average forced expiratory flow during the mid-expiratory phase of a forced vital capacity (FVC) maneuver, specifically between the points where 25% and 75% of the FVC remains to be exhaled. This parameter reflects the airflow through medium-sized and smaller airways during the effort-independent portion of expiration. FEF25-75 is measured from the flow-volume curve obtained during spirometry, using the maneuver with the largest sum of FEV1 and FVC, and is less effort-dependent than peak expiratory flow (PEF), making it more reliable for assessing sustained mid-expiratory flows. It is calculated as the mean expiratory flow over the middle 50% of the FVC, using the equation: \text{FEF}_{25-75} = \frac{0.5 \times \text{FVC}}{t_{75} - t_{25}} where t_{75} and t_{25} are the times at which 75% and 25% of the FVC remain, respectively.[33] FEF25-75 serves as an early sensitive marker for peripheral (small) airway obstruction, often detecting abnormalities in smokers before declines in FEV1 become evident.[34] For example, reduced FEF25-75 can indicate early obstructive changes in the distal airways associated with smoking-related lung damage. Reference values for FEF25-75 are typically reported as a percentage of predicted normal based on age, sex, and height using race-neutral equations like those from the Global Lung Initiative (GLI-2022); values between 50% and 100% of predicted are generally considered within the normal range, though the lower limit can extend below 50% due to higher variability.[35][21] The GLI-2022 equations are race-neutral, removing ethnicity as a predictor for more equitable global application. This parameter exhibits greater variability than FEV1, with a coefficient of variation (CV) of approximately 20-30% in adults, compared to 5-10% for FEV1.[35]Interpretation
Normal Reference Values
Normal reference values for spirometry are established using standardized prediction equations that account for demographic factors to define expected lung function in healthy individuals. The Global Lung Function Initiative (GLI)-2012 equations represent a widely adopted multi-ethnic reference set, derived from over 74,000 measurements across 26 countries and spanning ages 3 to 95 years. These equations incorporate age, sex, height, and ethnicity, employing the lambda-mu-sigma (LMS) method via generalized additive models for location, scale, and shape (GAMLSS) to handle age-dependent changes and distributional skewness, particularly in children.[20] For interpretation, z-scores are calculated as the number of standard deviations from the predicted mean, with values greater than -1.645 considered normal, corresponding to the lower limit of normal (LLN) at the 5th percentile of the healthy population distribution.[20] Key anthropometric factors influencing predicted values include height, which correlates more strongly with lung volumes (approximating a quadratic relationship for parameters like forced vital capacity) and linearly with flows (such as peak expiratory flow), alongside age-related declines that reduce predicted volumes and flows over time. Ethnicity-specific adjustments are integral, with predicted forced vital capacity (FVC) for North East Asians approximately 96–98% and for South East Asians 84–88% of Caucasian values, while African American predictions are about 85% of Caucasian FVC; these adjustments are incorporated within the GLI framework to avoid misclassification.[36] For example, the GLI-2012 model for log-transformed FVC in Caucasian males follows the form log(FVC) = a + b × log(height in cm) + c × log(age in years) + age-specific spline terms, where coefficients (a, b, c) are tabulated by sex and ethnicity, and the LLN is computed as the predicted value minus 1.645 times the coefficient of variation-derived standard deviation.[20] Population variability is evident in the age-dependent LLN, which decreases progressively (e.g., FEV1 LLN equating to 81% of predicted at age 10 but 69% at age 80), reflecting natural senescence. A 2022 update, the GLI Global equations, provides race-neutral reference values that do not require ethnicity selection, addressing concerns over potential biases in race-based adjustments while maintaining similar z-score and LLN approaches for interpretation.[37] Pediatric norms, included in the GLI-2012 equations, differ from adult values due to rapid growth phases, with the LMS method enabling smooth transitions and accounting for non-Gaussian distributions in younger age groups.[20] The American Thoracic Society (ATS) and European Respiratory Society (ERS) 2022 interpretive strategies update reinforces the superiority of LLN and z-score approaches over fixed percentage-predicted thresholds (e.g., 80% of predicted), as the latter lead to age- and sex-biased misclassifications, particularly in older adults where up to 20% of healthy individuals may fall below 80% predicted. This emphasis on LLN enhances accuracy for parameters like the FEV1/FVC ratio when assessing normality.[38]Patterns of Abnormal Results
Spirometry interpretation begins by evaluating the FEV1/FVC ratio to identify airflow limitation, followed by assessment of FVC to detect reduced lung volumes, with flow-volume loops providing visual confirmation of curve shapes. Abnormal patterns are classified as obstructive, restrictive, or mixed based on deviations from the lower limit of normal (LLN), typically the 5th percentile of reference values.[39] Bronchodilator responsiveness is tested to assess reversibility, defined as a ≥12% and ≥200 mL increase in FEV1 post-administration.[24] The obstructive pattern is characterized by a reduced FEV1/FVC ratio below the LLN, indicating airflow limitation, with FVC typically normal or elevated due to air trapping. The flow-volume loop shows a concave or "scooped" expiratory curve, reflecting prolonged expiration from narrowed airways.[39] This pattern is common in chronic obstructive pulmonary disease (COPD), where the expiratory limb appears scooped due to dynamic airway collapse.[24] In contrast, the restrictive pattern features a normal or elevated FEV1/FVC ratio (often >0.70 or above LLN) alongside a reduced FVC below the LLN, suggesting limited lung expansion without primary airflow obstruction. The flow-volume loop appears steep but truncated at low volumes, with a convex expiratory shape due to reduced total lung capacity (TLC), which requires full lung volume measurement for confirmation as it is not directly assessed by spirometry.[39] Examples include interstitial lung diseases like pulmonary fibrosis, where parenchymal stiffening restricts volume.[24] The mixed pattern combines elements of both, with a reduced FEV1/FVC ratio below LLN and FVC also below LLN, indicating concurrent airflow limitation and volume restriction. Flow-volume loops may show a scooped curve at reduced overall volumes, as seen in conditions like advanced COPD with comorbid fibrosis or obesity-related restriction.[39] Comprehensive pulmonary function testing is essential to differentiate contributions from each component.[24] Other abnormal shapes include variable extrathoracic upper airway obstruction, which flattens the inspiratory loop due to dynamic compression during inspiration, often from vocal cord dysfunction. Poor effort or suboptimal technique produces non-reproducible peaks, irregular curves, or hesitancy, with both FEV1 and FVC reduced but FEV1/FVC preserved, emphasizing the need for multiple acceptable maneuvers.[39] FEF25-75 may provide clues to small airway involvement in early obstruction but is not diagnostic alone.[24]| Pattern | Key Spirometric Features | Flow-Volume Loop Shape | Example Condition |
|---|---|---|---|
| Obstructive | FEV1/FVC < LLN; FVC normal/high | Concave/scooped expiratory | COPD |
| Restrictive | FEV1/FVC ≥ LLN; FVC < LLN | Steep, low-volume convex | Pulmonary fibrosis |
| Mixed | FEV1/FVC < LLN; FVC < LLN | Scooped at reduced volume | COPD + fibrosis |
| Variable Extrathoracic Obstruction | Variable loop flattening | Flattened inspiratory | Vocal cord dysfunction |
| Poor Effort | Non-reproducible; preserved ratio | Irregular peaks/hesitancy | Submaximal technique |
Grading Severity
Spirometry plays a crucial role in grading the severity of lung diseases by quantifying the degree of airflow limitation or restriction through key metrics like FEV1 and FVC expressed as percentages of predicted values. These gradings help clinicians assess disease impact, guide treatment decisions, and monitor progression, though they must be interpreted alongside clinical symptoms and other tests. Standardized criteria from major guidelines provide frameworks tailored to specific conditions such as chronic obstructive pulmonary disease (COPD), restrictive lung diseases, and asthma. For COPD, the Global Initiative for Chronic Obstructive Lung Disease (GOLD) criteria classify airflow obstruction severity based on post-bronchodilator FEV1 as a percentage of predicted value in patients with FEV1/FVC <0.70. The stages are as follows:| Stage | Severity | FEV1 % Predicted |
|---|---|---|
| 1 | Mild | ≥80% |
| 2 | Moderate | 50%–<80% |
| 3 | Severe | 30%–<50% |
| 4 | Very Severe | <30% |